]> git.ipfire.org Git - thirdparty/util-linux.git/commitdiff
mkswap: remove system architecture specific max swap size checks
authorSami Kerola <kerolasa@iki.fi>
Sun, 2 Nov 2014 20:26:25 +0000 (20:26 +0000)
committerKarel Zak <kzak@redhat.com>
Fri, 7 Nov 2014 12:21:05 +0000 (13:21 +0100)
Since kernel version 2.3.4 (June 1999) all architectures has used
uint32_t as maximum number or pages in a swap device or file, there is no
longer need to support systems earlier than that.

Signed-off-by: Sami Kerola <kerolasa@iki.fi>
disk-utils/mkswap.c

index 5eb4e6a515c3c834b37322e4d071acf5576f93ed..a1b864d65b31f9fb71d608c02ea571397056358a 100644 (file)
@@ -75,75 +75,6 @@ static int check = 0;
 
 #define SELINUX_SWAPFILE_TYPE  "swapfile_t"
 
-#ifdef __sparc__
-# ifdef __arch64__
-#  define is_sparc64() 1
-#  define is_be64() 1
-# else /* sparc32 */
-static int
-is_sparc64(void)
-{
-       struct utsname un;
-       static int sparc64 = -1;
-
-       if (sparc64 != -1)
-               return sparc64;
-       sparc64 = 0;
-
-       if (uname(&un) < 0)
-               return 0;
-       if (! strcmp(un.machine, "sparc64")) {
-               sparc64 = 1;
-               return 1;
-       }
-       if (strcmp(un.machine, "sparc"))
-               return 0; /* Should not happen */
-
-#ifdef HAVE_PERSONALITY
-       {
-               extern int personality(unsigned long);
-               int oldpers;
-#define PERS_LINUX          0x00000000
-#define PERS_LINUX_32BIT    0x00800000
-#define PERS_LINUX32        0x00000008
-
-               oldpers = personality(PERS_LINUX_32BIT);
-               if (oldpers != -1) {
-                       if (personality(PERS_LINUX) != -1) {
-                               uname(&un);
-                               if (! strcmp(un.machine, "sparc64")) {
-                                       sparc64 = 1;
-                                       oldpers = PERS_LINUX32;
-                               }
-                       }
-                       personality(oldpers);
-               }
-       }
-#endif
-
-       return sparc64;
-}
-#  define is_be64() is_sparc64()
-# endif /* sparc32 */
-#else /* !sparc */
-# define is_be64() 0
-#endif
-
-/*
- * The definition of the union swap_header uses the kernel constant PAGE_SIZE.
- * Unfortunately, on some architectures this depends on the hardware model, and
- * can only be found at run time -- we use getpagesize(), so that we do not
- * need separate binaries e.g. for sun4, sun4c/d/m and sun4u.
- *
- * Even more unfortunately, getpagesize() does not always return the right
- * information. For example, libc4, libc5 and glibc 2.0 do not use the system
- * call but invent a value themselves (EXEC_PAGESIZE or NBPG * CLSIZE or NBPC),
- * and thus it may happen that e.g. on a sparc kernel PAGE_SIZE=4096 and
- * getpagesize() returns 8192.
- *
- * What to do? Let us allow the user to specify the pagesize explicitly.
- *
- */
 static unsigned int user_pagesize;
 static unsigned int pagesize;
 static unsigned long *signature_page = NULL;
@@ -214,61 +145,6 @@ write_uuid_and_label(unsigned char *uuid, char *volume_name)
        }
 }
 
-/*
- * Find out what the maximum amount of swap space is that the kernel will
- * handle.  This wouldn't matter if the kernel just used as much of the
- * swap space as it can handle, but until 2.3.4 it would return an error
- * to swapon() if the swapspace was too large.
- */
-/* Before 2.2.0pre9 */
-#define V1_OLD_MAX_PAGES       ((0x7fffffff / pagesize) - 1)
-/* Since 2.2.0pre9, before 2.3.4:
-   error if nr of pages >= SWP_OFFSET(SWP_ENTRY(0,~0UL))
-   with variations on
-       #define SWP_ENTRY(type,offset) (((type) << 1) | ((offset) << 8))
-       #define SWP_OFFSET(entry) ((entry) >> 8)
-   on the various architectures. Below the result - yuk.
-
-   Machine     pagesize        SWP_ENTRY       SWP_OFFSET      bound+1 oldbound+2
-   i386                2^12            o<<8            e>>8            1<<24   1<<19
-   mips                2^12            o<<15           e>>15           1<<17   1<<19
-   alpha       2^13            o<<40           e>>40           1<<24   1<<18
-   m68k                2^12            o<<12           e>>12           1<<20   1<<19
-   sparc       2^{12,13}       (o&0x3ffff)<<9  (e>>9)&0x3ffff  1<<18   1<<{19,18}
-   sparc64     2^13            o<<13           e>>13           1<<51   1<<18
-   ppc         2^12            o<<8            e>>8            1<<24   1<<19
-   armo                2^{13,14,15}    o<<8            e>>8            1<<24   1<<{18,17,16}
-   armv                2^12            o<<9            e>>9            1<<23   1<<19
-
-   assuming that longs have 64 bits on alpha and sparc64 and 32 bits elsewhere.
-
-   The bad part is that we need to know this since the kernel will
-   refuse a swap space if it is too large.
-*/
-/* patch from jj - why does this differ from the above? */
-/* 32bit kernels have a second limitation of 2GB, sparc64 is limited by
-   the size of virtual address space allocation for vmalloc */
-#if defined(__alpha__)
-#define V1_MAX_PAGES           ((1 << 24) - 1)
-#elif defined(__mips__)
-#define V1_MAX_PAGES           ((1 << 17) - 1)
-#elif defined(__sparc__)
-#define V1_MAX_PAGES           (is_sparc64() ? ((3 << 29) - 1) : ((1 << 18) - 1))
-#elif defined(__ia64__)
-/*
- * The actual size will depend on the amount of virtual address space
- * available to vmalloc the swap map.
- */
-#define V1_MAX_PAGES          ((1UL << 54) - 1)
-#else
-#define V1_MAX_PAGES           V1_OLD_MAX_PAGES
-#endif
-/* man page now says:
-The maximum useful size of a swap area now depends on the architecture.
-It is roughly 2GB on i386, PPC, m68k, ARM, 1GB on sparc, 512MB on mips,
-128GB on alpha and 3TB on sparc64.
-*/
-
 #define MAX_BADPAGES   ((pagesize-1024-128*sizeof(int)-10)/sizeof(int))
 #define MIN_GOODPAGES  10
 
@@ -442,7 +318,6 @@ main(int argc, char **argv) {
        struct stat statbuf;
        struct swap_header_v1_2 *hdr;
        int c;
-       unsigned long long maxpages;
        unsigned long long goodpages;
        unsigned long long sz;
        off_t offset;
@@ -553,18 +428,9 @@ main(int argc, char **argv) {
                errx(EXIT_FAILURE,
                     _("error: swap area needs to be at least %ld KiB"),
                     (long)(MIN_GOODPAGES * pagesize / 1024));
-
-#ifdef __linux__
-       if (get_linux_version() >= KERNEL_VERSION(2,3,4))
-               maxpages = UINT_MAX + 1ULL;
-       else if (get_linux_version() >= KERNEL_VERSION(2,2,1))
-               maxpages = V1_MAX_PAGES;
-       else
-#endif
-               maxpages = V1_OLD_MAX_PAGES;
-
-       if (PAGES > maxpages) {
-               PAGES = maxpages;
+       if (PAGES > UINT32_MAX) {
+               /* true when swap is bigger than 17.59 terabytes */
+               PAGES = UINT32_MAX;
                warnx(_("warning: truncating swap area to %llu KiB"),
                        PAGES * pagesize / 1024);
        }