arm64: dts: qcom: x1e80100: Fix usb_2 controller interrupts

commit 680421056216efe727ff4ed48f481691d5873b9e upstream.

Back when the CRD support was brought up, the usb_2 controller didn't
have anything connected to it in order to test it properly, so it was
never enabled.

On the Lenovo ThinkPad T14s, the usb_2 controller has the fingerprint
controller connected to it. So enabling it, proved that the interrupts
lines were wrong from the start.

Fix both the pwr_event and the DWC ctrl_irq lines, according to
documentation.

Fixes: 4af46b7bd66f ("arm64: dts: qcom: x1e80100: Add USB nodes")
Cc: stable@vger.kernel.org	# 6.9
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250107-x1e80100-fix-usb2-controller-irqs-v1-1-4689aa9852a7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index f0797df9619b15f1e319d584414d694263892035..5fe8a6aa15e9bc341b553a0eed6b15c3dc8ff3f8 100644 (file)
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -4115,7 +4115,7 @@
                                          <&gcc GCC_USB20_MASTER_CLK>;
                        assigned-clock-rates = <19200000>, <200000000>;
 
-                       interrupts-extended = <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
+                       interrupts-extended = <&intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
                                              <&pdc 50 IRQ_TYPE_EDGE_BOTH>,
                                              <&pdc 49 IRQ_TYPE_EDGE_BOTH>;
                        interrupt-names = "pwr_event",
@@ -4141,7 +4141,7 @@
                        usb_2_dwc3: usb@a200000 {
                                compatible = "snps,dwc3";
                                reg = <0 0x0a200000 0 0xcd00>;
-                               interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
                                iommus = <&apps_smmu 0x14e0 0x0>;
                                phys = <&usb_2_hsphy>;
                                phy-names = "usb2-phy";