+++ /dev/null
-description "Check / filesystem"
-author "IPFire Team"
-
-start on stopped udevtrigger
-
-console output
-
-script
- # If requested, do not check the filesystems
- [ -f /fastboot ] && exit 0
-
- set -e
- . /etc/init/functions
-
- mount -n -o remount,ro / >/dev/null
- if [ ${?} != 0 ]; then
- log_failure_msg "Mounting root file system in read-only mode"
- echo -e "${FAILURE}FAILURE:\n"
- echo -e -n "${FAILURE}Cannot check root filesystem because it "
- echo -e "${FAILURE}could not be mounted"
- echo -e "${FAILURE}in read-only mode.\n\n"
- echo -e -n "${FAILURE}After you press Enter, this system will be "
- echo -e "${FAILURE}halted and powered off.\n"
- echo -e "${INFO}Press enter to continue...${NORMAL}"
- read ENTER
- ## XXX need to shutdown the system cleanly here
- fi
-
- # Force check if /forcefsck is found
- if [ -f /forcefsck ]; then
- options="-f"
- else
- options=""
- fi
-
- # Note: -a option used to be -p; but this fails e.g.
- # on fsck.minix
- fsck ${options} -a -A -C -T
- error_value=${?}
-
- if [ "${error_value}" = 1 ]; then
- log_warning_msg "Checking file systems..."
- echo -e "${WARNING}WARNING:\n"
- echo -e "${WARNING}File system errors were found and have been"
- echo -e "${WARNING}corrected. You may want to double-check that"
- echo -e "${WARNING}everything was fixed properly.${NORMAL}"
- elif [ "${error_value}" = 2 -o "${error_value}" = 3 ]; then
- log_warning_msg "Checking file systems..."
- echo -e "${WARNING}WARNING:\n"
- echo -e "${WARNING}File system errors were found and have been been"
- echo -e "${WARNING}corrected, but the nature of the errors require"
- echo -e "${WARNING}this system to be rebooted.\n"
- echo -e "After you press enter, this system will be rebooted.\n"
- echo -e "${INFO}Press Enter to continue...${NORMAL}"
- read ENTER
- ## XXX need to reboot the system here
- elif [ "${error_value}" -gt 3 -a "${error_value}" -lt 16 ]; then
- log_failure_msg "Checking file systems..."
- echo -e "${FAILURE}FAILURE:\n"
- echo -e "${FAILURE}File system errors were encountered that could"
- echo -e "${FAILURE}not be fixed automatically. This system cannot"
- echo -e "${FAILURE}continue to boot and will therefore be halted"
- echo -e "${FAILURE}until those errors are fixed manually by a"
- echo -e "${FAILURE}System Administrator.\n"
- echo -e "${FAILURE}After you press Enter, this system will be"
- echo -e "${FAILURE}halted and powered off.\n"
- echo -e "${INFO}Press Enter to continue...${NORMAL}"
- read ENTER
- ## XXX need to shutdown the system here
- elif [ "${error_value}" -ge 16 ]; then
- log_failure_msg "Checking file systems..."
- echo -e "${FAILURE}FAILURE:\n"
- echo -e "${FAILURE}Unexpected Failure running fsck. Exited with error"
- echo -e "${FAILURE}code: ${error_value}.${NORMAL}"
- exit ${error_value}
- fi
-end script
+++ /dev/null
-description "Cleaning / filesystem"
-author "IPFire Team"
-
-start on stopping mountfs
-
-pre-start script
- rm -rf /tmp/* /var/{lock,run}/*
-end script
+++ /dev/null
-description "Control-Alt-Delete / Handling"
-author "IPFire Team"
-
-start on control-alt-delete
-
-exec initctl emit --no-wait reboot
+++ /dev/null
-#!/bin/sh
-###############################################################################
-# #
-# IPFire.org - A linux based firewall #
-# Copyright (C) 2007, 2008 Michael Tremer & Christian Schmidt #
-# #
-# This program is free software: you can redistribute it and/or modify #
-# it under the terms of the GNU General Public License as published by #
-# the Free Software Foundation, either version 3 of the License, or #
-# (at your option) any later version. #
-# #
-# This program is distributed in the hope that it will be useful, #
-# but WITHOUT ANY WARRANTY; without even the implied warranty of #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
-# GNU General Public License for more details. #
-# #
-# You should have received a copy of the GNU General Public License #
-# along with this program. If not, see <http://www.gnu.org/licenses/>. #
-# #
-###############################################################################
-#
-# Partly based on scripts by DJ Lucas - dj@linuxfromscratch.org
-#
-
-# Distro Information
-DISTRO="$(</etc/system-release)" # The distro name
-DISTRO_CONTACT="http://bugtracker.ipfire.org" # Bug report address
-
-# This sets default terminal options.
-# stty sane - this has been removed as nobody recalls
-# the reason for it in the first place - if no problems arize,
-# then it will be removed completely at a later date.
-
-# Setup default values for the environment
-umask 022
-
-# If we boot, we should only allow the
-# use tools that are available in /bin:/sbin
-if [ -n "${UPSTART_JOB}" ]; then
- PATH="/bin:/sbin"
-fi
-
-# Find current screen size
-if [ -z "${COLUMNS}" ]; then
- COLUMNS=$(stty size)
- COLUMNS=${COLUMNS##* }
-fi
-
-# When using remote connections, such as a serial port, stty size returns 0
-if [ "${COLUMNS}" = "0" ]; then
- COLUMNS=80
-fi
-
-## Measurements for positioning result messages
-COL=$((${COLUMNS} - 8))
-WCOL=$((${COL} - 2))
-
-# Set Cursur Position Commands, used via echo -e
-SET_COL="\\033[${COL}G" # at the $COL char
-SET_WCOL="\\033[${WCOL}G" # at the $WCOL char
-CURS_UP="\\033[1A\\033[0G" # Up one line, at the 0'th char
-
-# Normal colors
-CLR_NORM_BLK="\\033[0;30m" # black
-CLR_NORM_RED="\\033[0;31m" # red
-CLR_NORM_GRN="\\033[0;32m" # green
-CLR_NORM_YEL="\\033[0;33m" # yellow
-CLR_NORM_BLU="\\033[0;34m" # blue
-CLR_NORM_MAG="\\033[0;35m" # magenta
-CLR_NORM_CYN="\\033[0;36m" # cyan
-CLR_NORM_WHT="\\033[0;37m" # white
-CLR_NORM_GRY="\\033[0;39m" # grey
-
-# Emphased colors
-CLR_BOLD_BLK="\\033[1;30m" # black
-CLR_BOLD_RED="\\033[1;31m" # red
-CLR_BOLD_GRN="\\033[1;32m" # green
-CLR_BOLD_YEL="\\033[1;33m" # yellow
-CLR_BOLD_BLU="\\033[1;34m" # blue
-CLR_BOLD_MAG="\\033[1;35m" # magenta
-CLR_BOLD_CYN="\\033[1;36m" # cyan
-CLR_BOLD_WHT="\\033[1;37m" # white
-CLR_BOLD_GRY="\\033[1;39m" # grey
-
-# Background colors
-CLR_BACK_BLK="\\033[40m" # black
-CLR_BACK_RED="\\033[41m" # red
-CLR_BACK_GRN="\\033[42m" # green
-CLR_BACK_YEL="\\033[43m" # yellow
-CLR_BACK_BLU="\\033[44m" # blue
-CLR_BACK_MAG="\\033[45m" # magenta
-CLR_BACK_CYN="\\033[46m" # cyan
-CLR_BACK_WHT="\\033[47m" # white
-
-# Action colors
-BOLD=$CLR_BOLD_GRY
-DONE=$CLR_BOLD_GRN
-SKIP=$CLR_BOLD_BLU
-WARN=$CLR_BOLD_MAG
-FAIL=$CLR_BOLD_RED
-NORMAL=$CLR_NORM_GRY
-
-# Color hooks
-BRACKET_L="${CLR_BOLD_BLU}[${NORMAL}"
-BRACKET_R="${CLR_BOLD_BLU}]${NORMAL}"
-
-# Define custom colors used in messages printed to the screen
-BRACKET=${CLR_BOLD_BLU} # Blue
-FAILURE=${CLR_BOLD_RED} # Red
-INFO=${CLR_BOLD_CYN} # Cyan
-NORMAL=${CLR_NORM_GRY} # Grey
-SUCCESS=${CLR_BOLD_GRN} # Green
-WARNING=${CLR_BOLD_YEL} # Yellow
-
-# Prefix boot messages for easier reading on framebuffer consoles
-PREFIX_SUCCESS=" ${SUCCESS}*${NORMAL} "
-PREFIX_WARNING="${WARNING}**${NORMAL} "
-PREFIX_FAILURE="${FAILURE}***${NORMAL}"
-
-welcome_message="Welcome to ${INFO}${DISTRO}${NORMAL}"
-welcome_message_length=$((${#DISTRO} + 11))
-
-# Error message displayed when a script's exit value is not zero
-print_error_msg() {
- # ${link} and ${error_value} are defined by the rc script
- echo -e "${FAILURE}FAILURE: You should not be reading this error message."
- echo -e ""
- echo -e -n "${FAILURE}It means that an unforseen error took place in"
- echo -e -n "${INFO} ${link}"
- echo -e "${FAILURE},"
- echo -e "${FAILURE}which exited with a return value of ${error_value}."
- echo -e ""
- echo -e -n "${FAILURE}If you are able to track this error down to a bug"
- echo -e "${FAILURE}in one of the files"
- echo -e -n "provided by ${INFO}${DISTRO}${FAILURE}, "
- echo -e -n "${FAILURE}please be so kind to inform us at "
- echo -e "${INFO}${DISTRO_CONTACT}${FAILURE}.${NORMAL}"
- echo -e ""
- echo -e "${INFO}Press Enter to continue..."
- echo -e "${NORMAL}"
- read ENTER
-}
-
-################################################################################
-# log_success_msg() #
-# Usage: log_success_msg [$MESSAGE | "message"] #
-# #
-# Purpose: Print a successful status message to the screen and optionally #
-# a boot log file. #
-# #
-# Inputs: accepts one string value, either a quoted string or optionally #
-# the value of $MESSAGE if set in the running environment. #
-# #
-# Return values: Not used #
-################################################################################
-log_success_msg() {
- echo -n -e "${PREFIX_SUCCESS}${INDENT}${@}"
- echo -e "${SET_COL}${BRACKET}[${SUCCESS} OK ${BRACKET}]${NORMAL}"
-}
-
-################################################################################
-# log_failure_msg() #
-# Usage: log_failure_msg [$MESSAGE | "message"] #
-# #
-# Purpose: Print a failure status message to the screen and optionally #
-# a boot log file. #
-# #
-# Inputs: accepts one string value, either a quoted string or optionally #
-# the value of $MESSAGE if set in the running environment. #
-# #
-# Return values: Not used #
-################################################################################
-log_failure_msg() {
- echo -n -e "${PREFIX_FAILURE}${INDENT}${@}"
- echo -e "${SET_COL}${BRACKET}[${FAILURE} FAIL ${BRACKET}]${NORMAL}"
-}
-
-################################################################################
-# log_warning_msg() #
-# Usage: log_warning_msg [$MESSAGE | "message"] #
-# #
-# Purpose: Print a warning status message to the screen and optionally #
-# a boot log file. #
-# #
-# Inputs: accepts one string value, either a quoted string or optionally #
-# the value of $MESSAGE if set in the running environment. #
-# #
-# Return values: Not used #
-################################################################################
-log_warning_msg() {
- echo -n -e "${PREFIX_WARNING}${INDENT}${@}"
- echo -e "${SET_COL}${BRACKET}[${WARNING} WARN ${BRACKET}]${NORMAL}"
-}
-
-############################## evaluate_retval() ###############################
-# evaluate_retval requires that you pass exactly one evaluation parameter of #
-# (start, stop, other) based on the previous action that is being evaluated. #
-# This function is intended for use with start_daemon and killproc to #
-# interpret the LSB exit codes properly, othewise the checks only for success #
-# or failure. #
-################################################################################
-evaluate_retval() {
- local error_value="${?}"
-
- # Handle LSB defined return values
- case "${1}" in
- start)
- case "${error_value}" in
- 0)
- log_success_msg "Starting ${MESSAGE} "
- return "${error_value}"
- ;;
- 2)
- log_failure_msg "Starting ${MESSAGE} Error: Invalid argument!"
- return "${error_value}"
- ;;
- 5)
- log_failure_msg "Starting ${MESSAGE} Error: Not available!"
- return "${error_value}"
- ;;
- *)
- log_failure_msg "Starting ${MESSAGE} Error: General failure!"
- return "${error_value}"
- ;;
- esac
- ;;
-
- stop)
- case "${error_value}" in
- 0)
- log_success_msg "Stopping ${MESSAGE} "
- return "${error_value}"
- ;;
- 2)
- log_failure_msg "Stopping ${MESSAGE} Error: Invalid argument!"
- return "${error_value}"
- ;;
- 5)
- log_failure_msg "Stopping ${MESSAGE} Error: Not available!"
- return "${error_value}"
- ;;
- 7)
- log_warning_msg "Stopping ${MESSAGE} Warning: Not running!"
- return "${error_value}"
- ;;
- *)
- log_failure_msg "Stopping ${MESSAGE} Error: General failure!"
- return "${error_value}"
- ;;
- esac
- ;;
-
- force-reload)
- message="Forcefully reloading "
- ;;
-
- reload)
- message="Reloading "
- ;;
-
- restart)
- message="Restarting "
- ;;
-
- try-restart)
- message="Trying restart "
- ;;
-
- standard)
- # $message or $MESSAGE must be set, but not both in order
- # to use the 'standard' target.
- ;;
- esac
-
- # Print messages for the generic force-reload, reload, restart,
- # and try-restart targets
- if [ "${error_value}" = "0" ]; then
- log_success_msg "${message}${MESSAGE} "
- return "${error_value}"
- else
- log_failure_msg "${message}${MESSAGE} "
- return "${error_value}"
- fi
-}
+++ /dev/null
-description "Trigger coldplug events"
-author "IPFire Team"
-
-start on stopped mount-kernel-filesystems
-
-script
- # Exit if there's no modules file or there are no
- # valid entries
- [ -r /etc/sysconfig/modules ] &&
- egrep -qv '^($|#)' /etc/sysconfig/modules ||
- exit 0
-
- # If proc is mounted, find the current kernel
- # message level
- if [ -f /proc/sys/kernel/printk ]; then
- prev_msg=`cat /proc/sys/kernel/printk | \
- sed 'l 1' | sed -n '2~0p' | \
- sed 's/\\\//'`
- else
- prev_msg="6"
- fi
-
- # Now set the message level to 1 so not to make too
- # much noise when loading modules
- dmesg -n 1
-
- # Only try to load modules if the user has actually given us
- # some modules to load.
- if egrep -qv '^(#|$)' /etc/sysconfig/modules 2>/dev/null; then
- # Read in the configuration file.
- exec 9>&0 < /etc/sysconfig/modules
-
- while read module args; do
- # Ignore comments and blank lines.
- case "${module}" in
- ""|\#*) continue ;;
- esac
-
- # Attempt to load the module, making
- # sure to pass any arguments provided.
- modprobe ${module} ${args} > /dev/null
- done
-
- exec 0>&9 9>&-
-
- fi
- # Set the kernel message level back to it's previous value.
- dmesg -n "${prev_msg}"
-end script
+++ /dev/null
-description "Bringing up the local network"
-author "IPFire Team"
-
-start on started udev
-
-script
- [ -e "/etc/sysconfig/network" ] && \
- . /etc/sysconfig/network
-
- ip addr add 127.0.0.1/8 label lo dev lo
- ip link set lo up
-
- if [ -n "${HOSTNAME}" ]; then
- hostname "${HOSTNAME}"
- fi
-end script
+++ /dev/null
-description "Mount kernel virtual systems"
-author "IPFire Team"
-
-start on stopped welcome
-
-script
- if ! mountpoint /proc > /dev/null; then
- mount -n /proc || failed=1
- fi
-
- if ! mountpoint /sys > /dev/null; then
- mount -n /sys || failed=1
- fi
-
- exit ${failed}
-end script
+++ /dev/null
-description "Mount / filesystem"
-author "IPFire Team"
-
-start on stopped checkfs
-
-console output
-
-script
- mount -n -o remount,rw / >/dev/null
-
- # Remove fsck-related file system watermarks.
- rm -f /fastboot /forcefsck
-
- > /etc/mtab
- mount -f /
- mount -f /proc
- mount -f /sys
-
- # This will mount all filesystems that do not have _netdev in
- # their option list. _netdev denotes a network filesystem.
- mount -a -O no_netdev >/dev/null
-end script
+++ /dev/null
-description "Start a tty"
-author "IPFire Team"
-
-# Automatically start a configured serial console
-#
-# How this works:
-#
-# On boot, a udev helper examines /dev/console. If a serial console is the
-# primary console (last console on the commandline in grub), the event
-# 'serial-console-available <port name> <speed>' is emitted, which
-# triggers this script.
-#
-# If your serial console is not the primary console, or you want a getty
-# on serial even if it's not the console, create your own event by copying
-# /etc/init/tty[2-6], and changing the getty line in that file.
-
-start on serial-console-available *
-stop on starting shutdown or starting reboot
-
-pre-start script
- /sbin/securetty $DEV
-end script
-
-exec /sbin/agetty $DEV $SPEED vt100-nav
+++ /dev/null
-description "Shutdown or reboot the system"
-author "IPFire Team"
-
-start on shutdown or reboot
-
-console output
-
-script
- # Exterminate any lil' process that managed to evade my merciless
- # terminating.
- killall5 -15 || true
- sleep 5
- killall5 -9 || true
-
- mount -n -o remount,ro / || true
-
- # The UPSTART_EVENTS variable contains the event that has been called.
- # The script use it to perform the requested action.
- if [ "${UPSTART_EVENTS}" = "reboot" ]; then
- reboot -pf
- else
- halt -pf
- fi
-end script
+++ /dev/null
-description "Activating swap partitions"
-author "IPFire Team"
-
-start on stopped checkfs
-
-exec /sbin/swapon -a
+++ /dev/null
-description "Set sysctl settings"
-author "IPFire Team"
-
-start on stopped mount-kernel-filesystems
-
-script
- if [ -f "/etc/sysctl.conf" ]; then
- sysctl -q -p
- fi
- if [ -d "/proc/sys/kernel/grsecurity" -a \
- -f "/etc/grsec/sysctl.conf" ]; then
- sysctl -q -p /etc/grsec/sysctl.conf
- fi
-end script
+++ /dev/null
-description "Start a tty"
-author "IPFire Team"
-
-start on stopped mountfs
-stop on starting shutdown
-
-respawn
-exec /sbin/agetty 9600 tty1
+++ /dev/null
-description "Start a tty"
-author "IPFire Team"
-
-start on stopped mountfs
-stop on starting shutdown
-
-respawn
-exec /sbin/agetty 9600 tty2
+++ /dev/null
-description "Start a tty"
-author "IPFire Team"
-
-start on stopped mountfs
-stop on starting shutdown
-
-respawn
-exec /sbin/agetty 9600 tty3
+++ /dev/null
-description "Start a tty"
-author "IPFire Team"
-
-start on stopped mountfs
-stop on starting shutdown
-
-respawn
-exec /sbin/agetty 9600 tty4
+++ /dev/null
-description "Start Udev Daemon"
-author "IPFire Team"
-
-start on stopped mount-kernel-filesystems
-stop on starting shutdown
-
-emits block-device-added block-device-removed
-emits network-device-added network-device-removed
-
-console output
-
-pre-start script
- # Mount a temporary file system over /dev, so that any devices
- # made or removed during this boot don't affect the next one.
- # The reason we don't write to mtab is because we don't ever
- # want /dev to be unavailable (such as by `umount -a').
- mount -n -t tmpfs tmpfs /dev -o mode=755
-
- # Udev handles uevents itself, so we don't need to have
- # the kernel call out to any binary in response to them
- echo > /proc/sys/kernel/hotplug
-
- # Copy static device nodes to /dev
- cp -a /lib/udev/devices/* /dev
-end script
-
-exec /sbin/udevd
-respawn
+++ /dev/null
-description "Trigger udev events"
-author "IPFire Team"
-
-start on started udev
-
-console output
-
-script
- # Now traverse /sys in order to "coldplug" devices that have
- # already been discovered
- udevadm trigger
-
- # Now wait for udevd to process the uevents we triggered
- udevadm settle --timeout=5 || true
-end script
+++ /dev/null
-description "Display a welcome message to the user"
-author "IPFire Team"
-
-start on startup
-
-console output
-
-script
- . /etc/init/functions
-
- # dcol are spaces before the message to center the
- # message on screen.
- dcol=$(( $(( ${COLUMNS} - ${welcome_message_length} )) / 2 ))
- echo -e "\\033[${dcol}G${welcome_message}"
-
- system_message=$(uname -r)
- system_message_length=${#system_message}
- system_message="Running on Linux ${FAILURE}${system_message}${NORMAL}"
- system_message_length=$((17 + ${system_message_length}))
- dcol=$(( $(( ${COLUMNS} - ${system_message_length} )) / 2 ))
- echo -e "\\033[${dcol}G${system_message}"
-
- echo ""
-end script
+++ /dev/null
-net.ipv4.ip_forward = 1
-net.ipv4.ip_dynaddr = 1
-net.ipv4.icmp_echo_ignore_broadcasts = 1
-net.ipv4.icmp_ignore_bogus_error_responses = 1
-
-net.ipv4.tcp_sack = 0
-net.ipv4.tcp_timestamps = 0
-net.ipv4.tcp_syncookies = 1
-net.ipv4.tcp_fin_timeout = 30
-net.ipv4.tcp_window_scaling = 0
-net.ipv4.tcp_syn_retries = 3
-net.ipv4.tcp_synack_retries = 3
-
-net.ipv4.conf.default.rp_filter = 0
-net.ipv4.conf.default.accept_redirects = 0
-net.ipv4.conf.default.accept_source_route = 0
-net.ipv4.conf.default.log_martians = 1
-
-net.ipv4.conf.all.rp_filter = 0
-net.ipv4.conf.all.accept_redirects = 0
-net.ipv4.conf.all.accept_source_route = 0
-net.ipv4.conf.all.log_martians = 1
-
-kernel.printk = 1 4 1 7
+++ /dev/null
-
-PROGS = console_check securetty
-
-CFLAGS += -D_GNU_SOURCE
-
-all: $(PROGS)
-
-clean:
- rm -vf $(PROGS) *.o
-
-install:
- -mkdir -pv $(DESTDIR)/lib/udev $(DESTDIR)/sbin
- install -v -m 755 console_check $(DESTDIR)/lib/udev/
- install -v -m 755 securetty $(DESTDIR)/sbin
-
-
-console_check: console_check.o
- $(CC) $(LDFLAGS) -o $@ $<
-
-securetty: securetty.o
- $(CC) $(LDFLAGS) -o $@ $<
+++ /dev/null
-
-#include <fcntl.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <termios.h>
-#include <unistd.h>
-
-#include <sys/ioctl.h>
-
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-
-struct speeds
-{
- speed_t speed;
- unsigned long value;
-};
-
-struct speeds speed_map[] =
-{
- {B50, 50},
- {B75, 75},
- {B110, 110},
- {B134, 134},
- {B150, 150},
- {B200, 200},
- {B300, 300},
- {B600, 600},
- {B1200, 1200},
- {B1800, 1800},
- {B2400, 2400},
- {B4800, 4800},
- {B9600, 9600},
- {B19200, 19200},
- {B38400, 38400},
-#ifdef B57600
- {B57600, 57600},
-#endif
-#ifdef B115200
- {B115200, 115200},
-#endif
-#ifdef B230400
- {B230400, 230400},
-#endif
-#ifdef B460800
- {B460800, 460800},
-#endif
- {0, 0}
-};
-
-int termcmp(struct termios *a, struct termios *b) {
- if (a->c_iflag != b->c_iflag || a->c_oflag != b->c_oflag ||
- a->c_cflag != b->c_cflag || a->c_lflag != b->c_lflag ||
- cfgetispeed(a) != cfgetispeed(b) || cfgetospeed(a) != cfgetospeed(b))
- return 1;
- return memcmp(a->c_cc, b->c_cc, sizeof(a->c_cc));
-}
-
-int get_serial_speed(int fd) {
- struct termios mode;
-
- if (!tcgetattr(fd, &mode)) {
- int i;
- speed_t speed;
-
- speed = cfgetospeed(&mode);
- for (i = 0; speed_map[i].value != 0; i++)
- if (speed_map[i].speed == speed)
- return speed_map[i].value;
- }
- return 0;
-}
-
-int compare_termios_to_console(char *dev, int *speed) {
- struct termios cmode, mode;
- int fd, cfd;
-
- cfd = open ("/dev/console", O_RDONLY);
- tcgetattr(cfd, &cmode);
- close(cfd);
-
- fd = open(dev, O_RDONLY|O_NONBLOCK);
- tcgetattr(fd, &mode);
-
- if (!termcmp(&cmode, &mode)) {
- *speed = get_serial_speed(fd);
- close(fd);
- return 1;
- }
- close(fd);
- return 0;
-}
-
-char *serial_tty_name(int type) {
- switch (type) {
- case PORT_8250...PORT_MAX_8250:
- return "ttyS";
- case PORT_PMAC_ZILOG:
- return "ttyPZ";
- case PORT_MPSC:
- return "ttyMM";
- case PORT_CPM:
- return "ttyCPM";
- case PORT_MPC52xx:
- return "ttyPSC";
- default:
- return NULL;
- }
-}
-
-char *check_serial_console(int *speed) {
- int fd;
- char *ret = NULL, *device;
- char twelve = 12;
- struct serial_struct si, si2;
- char *tty_name;
-
- memset(&si, 0, sizeof(si));
- memset(&si2, 0, sizeof(si));
-
- fd = open("/dev/console", O_RDWR);
- if (ioctl (fd, TIOCLINUX, &twelve) >= 0)
- goto out;
-
- if (ioctl(fd, TIOCGSERIAL, &si) < 0)
- goto out;
- close(fd);
-
- tty_name = serial_tty_name(si.type);
- if (!tty_name)
- goto out;
-
- asprintf(&device, "%s%d", tty_name, si.line);
- fd = open(device, O_RDWR|O_NONBLOCK);
- if (fd == -1)
- goto out;
-
- if (ioctl(fd, TIOCGSERIAL, &si2) < 0)
- goto out;
-
- if (memcmp(&si,&si2, sizeof(si)))
- goto out;
-
- *speed = get_serial_speed(fd);
- ret = device;
-out:
- close(fd);
- return ret;
-}
-
-int emit_console_event(char *dev, int speed) {
- char *args[] = { "initctl", "emit", "--no-wait", "serial-console-available", NULL, NULL, NULL };
-
- asprintf(&args[4],"DEV=%s", dev);
- if (speed)
- asprintf(&args[5],"SPEED=%d", speed);
- execv("/sbin/initctl", args);
- return 1;
-}
-
-int main(int argc, char **argv) {
- char *device;
- int speed;
-
- if (argc < 2) {
- printf("usage: console_check <device>\n");
- exit(1);
- }
- chdir("/dev");
- device = argv[1];
- if (!strcmp(device, "console")) {
- device = check_serial_console(&speed);
- if (device)
- return emit_console_event(device, speed);
- } else if (compare_termios_to_console(device, &speed)) {
- return emit_console_event(device, speed);
- }
- return 0;
-}
+++ /dev/null
-
-#include <errno.h>
-#include <fcntl.h>
-#include <signal.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <syslog.h>
-#include <unistd.h>
-
-#include <sys/types.h>
-#include <sys/stat.h>
-
-void alarm_handler(int num) {
- return;
-}
-
-int open_and_lock_securetty() {
- int fd;
- struct flock lock;
- struct sigaction act, oldact;
-
- lock.l_type = F_WRLCK;
- lock.l_whence = SEEK_SET;
- lock.l_start = 0;
- lock.l_len = 0;
-
- fd = open("/etc/securetty", O_RDWR);
- if (fd == -1) {
- syslog(LOG_ERR, "Couldn't open /etc/securetty: %s",strerror(errno));
- return -1;
- }
- act.sa_handler = alarm_handler;
- act.sa_flags = 0;
- sigaction(SIGALRM, &act, &oldact);
- alarm(2);
- while (fcntl(fd, F_SETLKW, &lock) == -1) {
- if (errno == EINTR) {
- syslog(LOG_ERR, "Couldn't lock /etc/securetty: Timeout exceeded");
- } else {
- syslog(LOG_ERR, "Couldn't lock /etc/securetty: %s",strerror(errno));
- }
- return -1;
- }
- alarm(0);
- sigaction(SIGALRM, &oldact, NULL);
- return fd;
-}
-
-int rewrite_securetty(char *terminal) {
- int fd;
- char *buf, *pos;
- struct stat sbuf;
-
- fd = open_and_lock_securetty();
- if (fd == -1)
- return 1;
- if (fstat(fd, &sbuf) == -1) {
- close(fd);
- syslog(LOG_ERR, "Couldn't stat /etc/securetty: %s",strerror(errno));
- return 1;
- }
- buf = malloc(sbuf.st_size + 1);
- if (read(fd, buf, sbuf.st_size) != sbuf.st_size) {
- close(fd);
- syslog(LOG_ERR, "Couldn't read /etc/securetty: %s",strerror(errno));
- return 1;
- }
- if (!strncmp(buf,terminal,strlen(terminal)) && buf[strlen(terminal)] == '\n')
- goto out_ok;
- if ((pos = strstr(buf, terminal))) {
- if (pos[strlen(terminal)] == '\n' && *(pos-1) == '\n')
- goto out_ok;
- }
- if (lseek(fd, 0, SEEK_END) == -1) {
- close(fd);
- syslog(LOG_ERR, "Couldn't seek to end of /etc/securetty: %s",strerror(errno));
- return 1;
- }
- write(fd, terminal, strlen(terminal));
- write(fd, "\n", 1);
-out_ok:
- close(fd);
- return 0;
-}
-
-int main(int argc, char **argv) {
- if (argc < 2 ) {
- fprintf(stderr, "Usage: securetty <device>\n");
- exit(1);
- }
- openlog("securetty", LOG_CONS, LOG_DAEMON);
- return rewrite_securetty(argv[1]);
-}
+++ /dev/null
-########################################################################
-# Begin /etc/sysconfig/createfiles
-#
-# Description : Createfiles script config file
-#
-# Authors :
-#
-# Version : 00.00
-#
-# Notes : The syntax of this file is as follows:
-# if type is equal to "file" or "dir"
-# <filename> <type> <permissions> <user> <group>
-# if type is equal to "dev"
-# <filename> <type> <permissions> <user> <group> <devtype> <major> <minor>
-#
-# <filename> is the name of the file which is to be created
-# <type> is either file, dir, or dev.
-# file creates a new file
-# dir creates a new directory
-# dev creates a new device
-# <devtype> is either block, char or pipe
-# block creates a block device
-# char creates a character deivce
-# pipe creates a pipe, this will ignore the <major> and <minor> fields
-# <major> and <minor> are the major and minor numbers used for the device.
-########################################################################
-
-# End /etc/sysconfig/createfiles
+++ /dev/null
-########################################################################
-# Begin /etc/sysconfig/modules
-#
-# Description : Module auto-loading configuration
-#
-# Authors :
-#
-# Version : 00.00
-#
-# Notes : The syntax of this file is as follows:
-# <module> [<arg1> <arg2> ...]
-#
-# Each module should be on it's own line, and any options that you want
-# passed to the module should follow it. The line deliminator is either
-# a space or a tab.
-########################################################################
-
-# For dialin with pppd
-ppp_generic
-
-# End /etc/sysconfig/modules
+++ /dev/null
-HOSTNAME=ipfire.localdomain
+++ /dev/null
-# Begin /etc/sysconfig/rc
-
-# Author: DJ Lucas - dj@linuxfromscratch.org
-# Version: 1.0 LSB V.3.1
-
-# Global variable inherited by initscripts are in caps
-# Local variables for the rc script are in lowercase
-
-# Source site specific rc configuration
-. /etc/sysconfig/rc.site
-
-# This sets default terminal options.
-# stty sane - this has been removed as nobody recalls
-# the reason for it in the first place - if no problems arize,
-# then it will be removed completely at a later date.
-
-# Setup default values for the environment
-umask 022
-PATH="/bin:/sbin"
-
-# Find current screen size
-if [ -z "${COLUMNS}" ]; then
- COLUMNS=$(stty size)
- COLUMNS=${COLUMNS##* }
-fi
-
-# When using remote connections, such as a serial port, stty size returns 0
-if [ "${COLUMNS}" = "0" ]; then
- COLUMNS=80
-fi
-
-## Measurements for positioning result messages
-COL=$((${COLUMNS} - 8))
-WCOL=$((${COL} - 2))
-
-# Set Cursur Position Commands, used via echo -e
-SET_COL="\\033[${COL}G" # at the $COL char
-SET_WCOL="\\033[${WCOL}G" # at the $WCOL char
-CURS_UP="\\033[1A\\033[0G" # Up one line, at the 0'th char
-
-# Bootlogging and interactive startup require a valid tempfs mount
-# if this mount is not present, disable them
-if [ "${TEMPFS_MOUNT}" = "" -o ! -d "${TEMPFS_MOUNT}" ]; then
- TEMPFS_MOUNT=""
- iprompt=""
- BOOTLOG_ENAB=""
-fi
-
-# Export the environment variables so they are inherited by the scripts
-export PATH SET_COL SET_WCOL CURS_UP TEMPFS_MOUNT BOOTLOG_ENAB RUNLEVEL
-
-# End /etc/sysconfig/rc
+++ /dev/null
-#!/bin/sh
-###############################################################################
-# #
-# IPFire.org - A linux based firewall #
-# Copyright (C) 2007 Michael Tremer & Christian Schmidt #
-# #
-# This program is free software: you can redistribute it and/or modify #
-# it under the terms of the GNU General Public License as published by #
-# the Free Software Foundation, either version 3 of the License, or #
-# (at your option) any later version. #
-# #
-# This program is distributed in the hope that it will be useful, #
-# but WITHOUT ANY WARRANTY; without even the implied warranty of #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
-# GNU General Public License for more details. #
-# #
-# You should have received a copy of the GNU General Public License #
-# along with this program. If not, see <http://www.gnu.org/licenses/>. #
-# #
-###############################################################################
-# Used for private calls after boot #
-###############################################################################
-
-# power button shutdown
-if grep -q '^button' /proc/modules ; then
- head -1 /proc/acpi/event | grep -q 'button/power PWRF' && init 0 &
-fi
+++ /dev/null
-# Set base directory information
-RC_BASE="/etc"
-RC_FUNCTIONS="${RC_BASE}/init.d/ipfire-functions"
-
-# Location of network device scripts and config files
-NETWORK_SCRIPTS="/etc/init.d/networking"
-NETWORK_DEVICES="/etc/sysconfig/network-devices"
-
-# Directory to store boot process accounting information
-# Used for boot logging and interactive flag when rootfs
-# is not writable
-TEMPFS_MOUNT="${RC_BASE}/init.d/boottemp"
-
-# Bootlogging (requires a tempfs mount)
-BOOTLOG_ENAB="yes"
-
-# Distro Information
-DISTRO="$(cat /etc/system-release)" # The distro name
-DISTRO_CONTACT="http://bugtracker.ipfire.org" # Bug report address
-DISTRO_MINI="ipfire" # Short name used in filenames for distro config
-
-# Define custom colors used in messages printed to the screen
-BRACKET="\\033[1;34m" # Blue
-FAILURE="\\033[1;31m" # Red
-INFO="\\033[1;36m" # Cyan
-NORMAL="\\033[0;39m" # Grey
-SUCCESS="\\033[1;32m" # Green
-WARNING="\\033[1;33m" # Yellow
-
-# Prefix boot messages for easier reading on framebuffer consoles
-PREFIX_SUCCESS=" ${SUCCESS}*${NORMAL} "
-PREFIX_WARNING="${WARNING}**${NORMAL} "
-PREFIX_FAILURE="${FAILURE}***${NORMAL}"
-
-# Export varialbles so that they are inherited by the initscripts
-export RC_BASE RC_FUNCTIONS TEMPFS_MOUNT BOOTLOG_ENAB
-export NETWORK_DEVICES NETWORK_SCRIPTS
-export DISTRO DISTRO_CONTACT DISTRO_MINI
-export BRACKET FAILURE INFO NORMAL SUCCESS WARNING
-export PREFIX_SUCCESS PREFIX_WARNING PREFIX_FAILURE
-
-# Interactive startup
-iprompt="yes" # Wether to display the interactive boot promp
-itime="2" # The ammount of time (in seconds) to display the prompt
-dlen="$(( 11 + ${#DISTRO} ))" # The total length of the distro welcome string
-ilen="38" # The total length of the interactive message
-welcome_message="Welcome to ${INFO}${DISTRO}${NORMAL}"
-i_message="Press '${FAILURE}I${NORMAL}' to enter interactive startup"
-
-# Error message displayed when a script's exit value is not zero
-print_error_msg()
-{
- # ${link} and ${error_value} are defined by the rc script
- echo -e "${FAILURE}FAILURE: You should not be reading this error message."
- echo -e ""
- echo -e -n "${FAILURE}It means that an unforseen error took place in"
- echo -e -n "${INFO} ${link}"
- echo -e "${FAILURE},"
- echo -e "${FAILURE}which exited with a return value of ${error_value}."
- echo -e ""
- echo -e -n "${FAILURE}If you are able to track this error down to a bug"
- echo -e "${FAILURE}in one of the files"
- echo -e -n "provided by ${INFO}${DISTRO}${FAILURE}, "
- echo -e -n "${FAILURE}please be so kind to inform us at "
- echo -e "${INFO}${DISTRO_CONTACT}${FAILURE}.${NORMAL}"
- echo -e ""
- echo -e "${INFO}Press Enter to continue..."
- echo -e "${NORMAL}"
- read ENTER
-}
-
+++ /dev/null
-#!/bin/bash
-###############################################################################
-# #
-# IPFire.org - A linux based firewall #
-# Copyright (C) 2008 Michael Tremer & Christian Schmidt #
-# #
-# This program is free software: you can redistribute it and/or modify #
-# it under the terms of the GNU General Public License as published by #
-# the Free Software Foundation, either version 3 of the License, or #
-# (at your option) any later version. #
-# #
-# This program is distributed in the hope that it will be useful, #
-# but WITHOUT ANY WARRANTY; without even the implied warranty of #
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the #
-# GNU General Public License for more details. #
-# #
-# You should have received a copy of the GNU General Public License #
-# along with this program. If not, see <http://www.gnu.org/licenses/>. #
-# #
-###############################################################################
-
-is_true() {
- [ "$1" = "1" ] || [ "$1" = "yes" ] || [ "$1" = "true" ]
-}
-
-# Native English speakers probably don't have /etc/sysconfig/console at all
-if [ -f /etc/sysconfig/console ]; then
- . /etc/sysconfig/console
-fi
-
-# Setting default values
-[ -z "$UNICODE" ] && UNICODE=1
-[ -z "$FONT" ] && FONT="LatArCyrHeb-16"
-
-device="/dev/$1"
-
-# Figure out the mode to set the console into
-if is_true "${UNICODE}"; then
- echo -en '\033%G' > $device
-else
- echo -en '\033%@' > $device
-fi
-
-# Setting font
-setfont ${FONT} -C $device
-
-# Setting up keyboard
-if [ -n "$KEYMAP" ]; then
- if is_true "${UNICODE}"; then
- loadkeys -u $KEYMAP >/dev/null
- else
- loadkeys $KEYMAP >/dev/null
- fi
- [ -n "$KEYMAP_CORRECTIONS" ] && \
- loadkeys $KEYMAP_CORRECTIONS >/dev/null
-fi
projects / ipfire-3.x.git / commitdiff
