Various pages: Use \[lq] instead of \(lq

Signed-off-by: Alejandro Colomar <alx@kernel.org>

diff --git a/man2/bind.2 b/man2/bind.2
index 350a2f7e1873bb84648e3d878948856f1156ccbd..5b265e403d6c266059c531f65851e295d7ca265c 100644 (file)
--- a/man2/bind.2
+++ b/man2/bind.2
@@ -43,7 +43,7 @@ to the socket referred to by the file descriptor
 .I addrlen
 specifies the size, in bytes, of the address structure pointed to by
 .IR addr .
-Traditionally, this operation is called \(lqassigning a name to a socket\(rq.
+Traditionally, this operation is called \[lq]assigning a name to a socket\(rq.
 .PP
 It is normally necessary to assign a local address using
 .BR bind ()

diff --git a/man2/mmap.2 b/man2/mmap.2
index 1ecd8637ce7ab2c9b99a7215d2efe73ce13d9fec..2df5793dd9294d32a9a05ccb856fc2b226f1b7cc 100644 (file)
--- a/man2/mmap.2
+++ b/man2/mmap.2
@@ -273,7 +273,7 @@ Note that older kernels which do not recognize the
 .B MAP_FIXED_NOREPLACE
 flag will typically (upon detecting a collision with a preexisting mapping)
 fall back to a
-.RB \(lqnon- MAP_FIXED \(rq
+.RB \[lq]non- MAP_FIXED \(rq
 type of behavior:
 they will return an address that is different from the requested address.
 Therefore, backward-compatible software

diff --git a/man2/prctl.2 b/man2/prctl.2
index 4e55dc55c46f1d03bdc7f9d1f0f25cec22efea21..be3be4c5680e9d4b10b17620e7f7485b94764cd9 100644 (file)
--- a/man2/prctl.2
+++ b/man2/prctl.2
@@ -998,7 +998,7 @@ data authentication key A
 data authentication key B
 .TP
 .B PR_PAC_APGAKEY
-generic authentication \(lqA\(rq key.
+generic authentication \[lq]A\(rq key.
 .IP
 (Yes folks, there really is no generic B key.)
 .RE

diff --git a/man2/socket.2 b/man2/socket.2
index e42a973445b42f740cdf51bbdb9ce0362958f497..8c3add08411e1cfa4d06e3d4cda19176f53202d9 100644 (file)
--- a/man2/socket.2
+++ b/man2/socket.2
@@ -485,8 +485,8 @@ is shown in
 .BR udp (7),
 .BR unix (7)
 .PP
-\(lqAn Introductory 4.3BSD Interprocess Communication Tutorial\(rq
+\[lq]An Introductory 4.3BSD Interprocess Communication Tutorial\(rq
 and
-\(lqBSD Interprocess Communication Tutorial\(rq,
+\[lq]BSD Interprocess Communication Tutorial\(rq,
 reprinted in
 .I UNIX Programmer's Supplementary Documents Volume 1.

diff --git a/man3/rpc.3 b/man3/rpc.3
index dd33f26065ecd39713bd55b9b2c63a244ab6d898..786a9379e1dc06314ebd720d7cd46e369263e417 100644 (file)
--- a/man3/rpc.3
+++ b/man3/rpc.3
@@ -229,8 +229,8 @@ Generic client creation routine.
 identifies the name of the remote host where the server is located.
 .I proto
 indicates which kind of transport protocol to use.
-The currently supported values for this field are \(lqudp\(rq
-and \(lqtcp\(rq.
+The currently supported values for this field are \[lq]udp\(rq
+and \[lq]tcp\(rq.
 Default timeouts are set, but can be modified using
 .BR clnt_control ().
 .IP
@@ -599,7 +599,7 @@ in
 .BR callrpc ()
 and
 .BR clnt_call ().
-This procedure should be used for a \(lqping\(rq and nothing else.
+This procedure should be used for a \[lq]ping\(rq and nothing else.
 See also
 .BR clnt_broadcast ().
 .PP

diff --git a/man4/st.4 b/man4/st.4
index 9e15078fd124a3fc1c917d31a6909ff2e4645be7..773627a2ed4267cbbfb86c3cba9c68ba19af1232 100644 (file)
--- a/man4/st.4
+++ b/man4/st.4
@@ -19,7 +19,7 @@ The
 .B st
 driver provides the interface to a variety of SCSI tape devices.
 Currently, the driver takes control of all detected devices of type
-\(lqsequential-access\(rq.
+\[lq]sequential-access\(rq.
 The
 .B st
 driver uses major device number 9.
@@ -33,12 +33,12 @@ concatenated to the five lowermost bits to form the tape number.
 The minor numbers can be grouped into
 two sets of four numbers: the principal (auto-rewind) minor device numbers,
 .IR n ,
-and the \(lqno-rewind\(rq device numbers,
+and the \[lq]no-rewind\(rq device numbers,
 .RI ( n " + 128)."
 Devices opened using the principal device number will be sent a
 .B REWIND
 command when they are closed.
-Devices opened using the \(lqno-rewind\(rq device number will not.
+Devices opened using the \[lq]no-rewind\(rq device number will not.
 (Note that using an auto-rewind device for positioning the tape with,
 for instance, mt does not lead to the desired result: the tape is
 rewound after the mt command and the next command starts from the
@@ -755,7 +755,7 @@ found the drive with a tape in place and ready for operation.
 \fBGMT_D_1600\fP(\fIx\fP)
 .TQ
 \fBGMT_D_800\fP(\fIx\fP)
-This \(lqgeneric\(rq status information reports the current
+This \[lq]generic\(rq status information reports the current
 density setting for 9-track \(12" tape drives only.
 .TP
 \fBGMT_DR_OPEN\fP(\fIx\fP)

diff --git a/man5/tzfile.5 b/man5/tzfile.5
index 7d9f736523987fcdd989021c9b65467e6677cb03..bb026b09776e93678c52637521ac50424e3c59b9 100644 (file)
--- a/man5/tzfile.5
+++ b/man5/tzfile.5
@@ -7,8 +7,8 @@
 .SH NAME
 tzfile \- timezone information
 .SH DESCRIPTION
-.ie '\(lq'' .ds lq \&"\"
-.el .ds lq \(lq\"
+.ie '\[lq]'' .ds lq \&"\"
+.el .ds lq \[lq]\"
 .ie '\(rq'' .ds rq \&"\"
 .el .ds rq \(rq\"
 .de q

diff --git a/man7/ddp.7 b/man7/ddp.7
index cec2de3be081275ec098ed396e857f0dcc39cb86..74ba4ee2f76fd18fabd96adfbb761defb52c2be6 100644 (file)
--- a/man7/ddp.7
+++ b/man7/ddp.7
@@ -103,7 +103,7 @@ contains the host network in network byte order.
 The value of
 .B AT_ANYNET
 is a
-wildcard and also implies \(lqthis network.\(rq
+wildcard and also implies \[lq]this network.\(rq
 The
 .I node
 member of
@@ -112,7 +112,7 @@ contains the host node number.
 The value of
 .B AT_ANYNODE
 is a
-wildcard and also implies \(lqthis node.\(rq The value of
+wildcard and also implies \[lq]this node.\(rq The value of
 .B ATADDR_BCAST
 is a link
 local broadcast address.

diff --git a/man7/libc.7 b/man7/libc.7
index 43ec0269f121148b290b1dff472db6456a1cd2a2..47d008b1beb5e329bf92ee204c82c959eac17fa1 100644 (file)
--- a/man7/libc.7
+++ b/man7/libc.7
@@ -7,13 +7,13 @@
 .SH NAME
 libc \- overview of standard C libraries on Linux
 .SH DESCRIPTION
-The term \(lqlibc\(rq is commonly used as a shorthand for
-the \(lqstandard C library\(rq
+The term \[lq]libc\(rq is commonly used as a shorthand for
+the \[lq]standard C library\(rq
 a library of standard functions that can be used by all C programs
 (and sometimes by programs in other languages).
 Because of some history
 (see below),
-use of the term \(lqlibc\(rq
+use of the term \[lq]libc\(rq
 to refer to the standard C library is somewhat ambiguous on Linux.
 .SS glibc
 By far the most widely used C library on Linux is the
@@ -51,7 +51,7 @@ there was for a while
 a fork of glibc 1.x created by Linux developers who felt that glibc
 development at the time was not sufficing for the needs of Linux.
 Often,
-this library was referred to (ambiguously) as just \(lqlibc\(rq.
+this library was referred to (ambiguously) as just \[lq]libc\(rq.
 Linux libc released major versions 2, 3, 4, and 5,
 as well as many minor versions of those releases.
 Linux libc4 was the last version to use the a.out binary format,

diff --git a/man7/socket.7 b/man7/socket.7
index c1989b9ee33e445829d5e08e02652a7b98c81f8b..6a88133b8363eeba171f3cd494d5602ac8f7ff37 100644 (file)
--- a/man7/socket.7
+++ b/man7/socket.7
@@ -400,7 +400,7 @@ UDP support for this feature is available since Linux 4.5;
 TCP support is available since Linux 4.6.
 .TP
 .B SO_BINDTODEVICE
-Bind this socket to a particular device like \(lqeth0\(rq,
+Bind this socket to a particular device like \[lq]eth0\(rq,
 as specified in the passed interface name.
 If the
 name is an empty string or the option length is zero, the socket device

diff --git a/man7/x25.7 b/man7/x25.7
index 446d314cf5f8c50c2c560e36f031fa61c3096d29..912a587e1be89a22820b612840645189110fcbde 100644 (file)
--- a/man7/x25.7
+++ b/man7/x25.7
@@ -121,7 +121,7 @@ if a reset occurred, data might be lost without notice.
 .BR socket (7)
 .PP
 Jonathan Simon Naylor:
-\(lqThe Re-Analysis and Re-Implementation of X.25.\(rq
+\[lq]The Re-Analysis and Re-Implementation of X.25.\(rq
 The URL is
 .UR ftp://ftp.pspt.fi\:/pub\:/ham\:/linux\:/ax25\:/x25doc.tgz
 .UE .

diff --git a/man8/zdump.8 b/man8/zdump.8
index abbead6efffe5d53edade4258ea387514448dbcc..f77a6d194afe954172c52805ccbbaeab86c00979 100644 (file)
--- a/man8/zdump.8
+++ b/man8/zdump.8
@@ -13,8 +13,8 @@ zdump \- timezone dumper
 .I timezone
 \&... ]
 .SH DESCRIPTION
-.ie '\(lq'' .ds lq \&"\"
-.el .ds lq \(lq\"
+.ie '\[lq]'' .ds lq \&"\"
+.el .ds lq \[lq]\"
 .ie '\(rq'' .ds rq \&"\"
 .el .ds rq \(rq\"
 .de q

diff --git a/man8/zic.8 b/man8/zic.8
index e0c433c47712a5d91dd8a3d5a2ce731d5f362e7c..a1955f7f3f0684fc95440011fff5cbb4e2ad51ef 100644 (file)
--- a/man8/zic.8
+++ b/man8/zic.8
@@ -13,8 +13,8 @@ zic \- timezone compiler
 .I filename
 \&... ]
 .SH DESCRIPTION
-.ie '\(lq'' .ds lq \&"\"
-.el .ds lq \(lq\"
+.ie '\[lq]'' .ds lq \&"\"
+.el .ds lq \[lq]\"
 .ie '\(rq'' .ds rq \&"\"
 .el .ds rq \(rq\"
 .de q