Add QCA vendor attributes for user defined power save parameters

Extend QCA_WLAN_VENDOR_ATTR_CONFIG_OPTIMIZED_POWER_MANAGEMENT
attribute to support enum qca_wlan_vendor_opm_mode.

Add QCA vendor attribute QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_ITO and
QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_SPEC_WAKE to configure inactivity
timeout and speculative wake interval in User defined optimized
power save mode.

Signed-off-by: Vishal Miskin <quic_vmiskin@quicinc.com>

diff --git a/src/common/qca-vendor.h b/src/common/qca-vendor.h
index b776082f1b954a14299d0c5c2e3b6f39fbe242e5..aade3ae684f87f87a357156565d014b92165212a 100644 (file)
--- a/src/common/qca-vendor.h
+++ b/src/common/qca-vendor.h
@@ -2833,8 +2833,13 @@ enum qca_wlan_vendor_attr_config {
         * configure the asymmetric NSS configuration (such as 1X2).
         */
        QCA_WLAN_VENDOR_ATTR_CONFIG_NSS = 70,
-       /* 8-bit unsigned value to trigger Optimized Power Management:
-        * 1-Enable, 0-Disable
+       /* 8-bit unsigned value to configure Optimized Power Management mode:
+        * Modes are defined by enum qca_wlan_vendor_opm_mode.
+        *
+        * This attribute shall be configured along with
+        * %QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_ITO and
+        * %QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_SPEC_WAKE_INTERVAL attributes
+        * when its value is set to %QCA_WLAN_VENDOR_OPM_MODE_USER_DEFINED.
         */
        QCA_WLAN_VENDOR_ATTR_CONFIG_OPTIMIZED_POWER_MANAGEMENT = 71,
 
@@ -3202,6 +3207,34 @@ enum qca_wlan_vendor_attr_config {
         */
        QCA_WLAN_VENDOR_ATTR_CONFIG_MLO_LINKS = 100,
 
+       /* 16-bit unsigned value to configure power save inactivity timeout in
+        * milliseconds.
+        *
+        * STA enters into power save mode (PM=1) after TX/RX inactivity of time
+        * duration specified by %QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_ITO.
+        *
+        * This attribute shall be configured along with
+        * %QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_SPEC_WAKE_INTERVAL when
+        * %QCA_WLAN_VENDOR_ATTR_CONFIG_OPTIMIZED_POWER_MANAGEMENT
+        * is set to %QCA_WLAN_VENDOR_OPM_MODE_USER_DEFINED mode.
+        */
+       QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_ITO = 101,
+
+       /* 16-bit unsigned value to configure speculative wake interval in
+        * milliseconds.
+        *
+        * STA speculatively wakes up to look for buffered data by AP at
+        * %QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_SPEC_WAKE_INTERVAL interval after
+        * entering into power save. If configured zero, STA wakes up at
+        * upcoming DTIM beacon.
+        *
+        * This attribute shall be configured along with
+        * %QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_ITO and
+        * %QCA_WLAN_VENDOR_ATTR_CONFIG_OPTIMIZED_POWER_MANAGEMENT
+        * to %QCA_WLAN_VENDOR_OPM_MODE_USER_DEFINED mode.
+        */
+       QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_SPEC_WAKE_INTERVAL = 102,
+
        /* keep last */
        QCA_WLAN_VENDOR_ATTR_CONFIG_AFTER_LAST,
        QCA_WLAN_VENDOR_ATTR_CONFIG_MAX =
@@ -15997,4 +16030,22 @@ enum qca_wlan_vendor_attr_tdls_state {
        QCA_WLAN_VENDOR_ATTR_TDLS_STATE_AFTER_LAST - 1,
 };
 
+/*
+ * enum qca_wlan_vendor_opm_mode - Modes supported by
+ * %QCA_WLAN_VENDOR_ATTR_CONFIG_OPTIMIZED_POWER_MANAGEMENT vendor attribute.
+ *
+ * @QCA_WLAN_VENDOR_OPM_MODE_DISABLE: OPM Disabled
+ * @QCA_WLAN_VENDOR_OPM_MODE_ENABLE: OPM Enabled
+ * @QCA_WLAN_VENDOR_OPM_MODE_USER_DEFINED: User defined mode which allows user
+ *     to configure power save inactivity timeout and speculative wake up
+ *     interval through %QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_ITO and
+ *     %QCA_WLAN_VENDOR_ATTR_CONFIG_OPM_SPEC_WAKE_INTERVAL attributes.
+ */
+
+enum qca_wlan_vendor_opm_mode {
+       QCA_WLAN_VENDOR_OPM_MODE_DISABLE = 0,
+       QCA_WLAN_VENDOR_OPM_MODE_ENABLE = 1,
+       QCA_WLAN_VENDOR_OPM_MODE_USER_DEFINED = 2,
+};
+
 #endif /* QCA_VENDOR_H */