bsh: make common configuration for m2

Since M2 and M2B share the same defconfig aside from one parameter, we
have a common configuration that also allows us to support addition of
new boards based on the M2 hardware.

Signed-off-by: Andrea Calabrese <andrea.calabrese@amarulasolutions.com>

diff --git a/configs/imx6ulz_smm_m2.config b/configs/imx6ulz_smm_m2.config
new file mode 100644 (file)
index 0000000..67c1ca3
--- /dev/null
+++ b/configs/imx6ulz_smm_m2.config
@@ -0,0 +1,81 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_TEXT_BASE=0x87800000
+CONFIG_SYS_MALLOC_LEN=0x1000000
+CONFIG_SYS_MALLOC_F_LEN=0x18000
+CONFIG_SPL_GPIO=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0x400000
+CONFIG_MX6ULL=y
+CONFIG_TARGET_MX6ULZ_SMM_M2=y
+CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6ulz-bsh-smm-m2"
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_BSS_START_ADDR=0x84100000
+CONFIG_SPL=y
+CONFIG_FIT=y
+CONFIG_FIT_SIGNATURE=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=3
+CONFIG_BOARD_LATE_INIT=y
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_DMA=y
+CONFIG_SPL_MTD=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_WATCHDOG=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:4m(nandboot),1m(env),8m(kernel),1m(nanddtb),-(rootfs)"
+CONFIG_CMD_UBI=y
+# CONFIG_ISO_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RELOC_GD_ENV_ADDR=y
+CONFIG_NO_NET=y
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_CLK_COMPOSITE_CCF=y
+CONFIG_CLK_IMX6UL=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x82000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_UUU_SUPPORT=y
+CONFIG_SYS_I2C_MXC=y
+# CONFIG_MMC is not set
+CONFIG_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_SYS_NAND_USE_FLASH_BBT=y
+CONFIG_NAND_MXS=y
+CONFIG_NAND_MXS_DT=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x111400
+CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x291400
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_PMIC=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_MXC_UART=y
+CONFIG_SYSRESET=y
+CONFIG_SYSRESET_WATCHDOG=y
+CONFIG_IMX_THERMAL=y
+CONFIG_USB=y
+CONFIG_SPL_USB_HOST=y
+CONFIG_USB_GADGET=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="BSH"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0525
+CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
+CONFIG_CI_UDC=y
+CONFIG_SDP_LOADADDR=0x877fffc0
+CONFIG_SPL_USB_SDP_SUPPORT=y
+CONFIG_IMX_WATCHDOG=y

diff --git a/configs/imx6ulz_smm_m2_defconfig b/configs/imx6ulz_smm_m2_defconfig
index 67c1ca33074ee2c152ea5eee20418af1719ed198..50dafd887f24161057add2c6a3c1b17198ec69f5 100644 (file)
--- a/configs/imx6ulz_smm_m2_defconfig
+++ b/configs/imx6ulz_smm_m2_defconfig
@@ -1,81 +1 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_TEXT_BASE=0x87800000
-CONFIG_SYS_MALLOC_LEN=0x1000000
-CONFIG_SYS_MALLOC_F_LEN=0x18000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0x400000
-CONFIG_MX6ULL=y
-CONFIG_TARGET_MX6ULZ_SMM_M2=y
-CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6ulz-bsh-smm-m2"
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL_BSS_START_ADDR=0x84100000
-CONFIG_SPL=y
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTDELAY=3
-CONFIG_BOARD_LATE_INIT=y
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_DMA=y
-CONFIG_SPL_MTD=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_SPL_WATCHDOG=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_SDP=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:4m(nandboot),1m(env),8m(kernel),1m(nanddtb),-(rootfs)"
-CONFIG_CMD_UBI=y
-# CONFIG_ISO_PARTITION is not set
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_ENV_RELOC_GD_ENV_ADDR=y
-CONFIG_NO_NET=y
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_CLK_COMPOSITE_CCF=y
-CONFIG_CLK_IMX6UL=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x82000000
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_UUU_SUPPORT=y
-CONFIG_SYS_I2C_MXC=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SYS_NAND_USE_FLASH_BBT=y
-CONFIG_NAND_MXS=y
-CONFIG_NAND_MXS_DT=y
-CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
-CONFIG_SYS_NAND_U_BOOT_OFFS=0x111400
-CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x291400
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_MXC_UART=y
-CONFIG_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_IMX_THERMAL=y
-CONFIG_USB=y
-CONFIG_SPL_USB_HOST=y
-CONFIG_USB_GADGET=y
-CONFIG_SPL_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="BSH"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0525
-CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_CI_UDC=y
-CONFIG_SDP_LOADADDR=0x877fffc0
-CONFIG_SPL_USB_SDP_SUPPORT=y
-CONFIG_IMX_WATCHDOG=y
+#include <configs/imx6ulz_smm_m2.config>

diff --git a/configs/imx6ulz_smm_m2b_defconfig b/configs/imx6ulz_smm_m2b_defconfig
index 3bd89206c5cf19a496e86b4d3257dfba88150538..65802ae8f3421265d14a0eb2edd23dd28f1dca10 100644 (file)
--- a/configs/imx6ulz_smm_m2b_defconfig
+++ b/configs/imx6ulz_smm_m2b_defconfig
@@ -1,82 +1,2 @@
-CONFIG_ARM=y
-CONFIG_ARCH_MX6=y
-CONFIG_TEXT_BASE=0x87800000
-CONFIG_SYS_MALLOC_LEN=0x1000000
-CONFIG_SYS_MALLOC_F_LEN=0x18000
-CONFIG_SPL_GPIO=y
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_NR_DRAM_BANKS=1
-CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0x400000
-CONFIG_MX6ULL=y
-CONFIG_TARGET_MX6ULZ_SMM_M2=y
+#include <configs/imx6ulz_smm_m2.config>
 CONFIG_BSH_M2B_MEMORY=y
-CONFIG_DEFAULT_DEVICE_TREE="nxp/imx/imx6ulz-bsh-smm-m2"
-CONFIG_SPL_SERIAL=y
-CONFIG_SPL_BSS_START_ADDR=0x84100000
-CONFIG_SPL=y
-CONFIG_FIT=y
-CONFIG_FIT_SIGNATURE=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_BOOTDELAY=3
-CONFIG_BOARD_LATE_INIT=y
-CONFIG_SPL_SYS_MALLOC=y
-CONFIG_SPL_DMA=y
-CONFIG_SPL_MTD=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_SPL_WATCHDOG=y
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_USB_SDP=y
-CONFIG_CMD_CACHE=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:4m(nandboot),1m(env),8m(kernel),1m(nanddtb),-(rootfs)"
-CONFIG_CMD_UBI=y
-# CONFIG_ISO_PARTITION is not set
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_ENV_RELOC_GD_ENV_ADDR=y
-CONFIG_NO_NET=y
-CONFIG_BOUNCE_BUFFER=y
-CONFIG_CLK_COMPOSITE_CCF=y
-CONFIG_CLK_IMX6UL=y
-CONFIG_USB_FUNCTION_FASTBOOT=y
-CONFIG_FASTBOOT_BUF_ADDR=0x82000000
-CONFIG_FASTBOOT_FLASH=y
-CONFIG_FASTBOOT_UUU_SUPPORT=y
-CONFIG_SYS_I2C_MXC=y
-# CONFIG_MMC is not set
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SYS_NAND_USE_FLASH_BBT=y
-CONFIG_NAND_MXS=y
-CONFIG_NAND_MXS_DT=y
-CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
-CONFIG_SYS_NAND_U_BOOT_OFFS=0x111400
-CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x291400
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_IMX6=y
-CONFIG_DM_PMIC=y
-CONFIG_DM_REGULATOR=y
-CONFIG_DM_REGULATOR_FIXED=y
-CONFIG_MXC_UART=y
-CONFIG_SYSRESET=y
-CONFIG_SYSRESET_WATCHDOG=y
-CONFIG_IMX_THERMAL=y
-CONFIG_USB=y
-CONFIG_SPL_USB_HOST=y
-CONFIG_USB_GADGET=y
-CONFIG_SPL_USB_GADGET=y
-CONFIG_USB_GADGET_MANUFACTURER="BSH"
-CONFIG_USB_GADGET_VENDOR_NUM=0x0525
-CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_CI_UDC=y
-CONFIG_SDP_LOADADDR=0x877fffc0
-CONFIG_SPL_USB_SDP_SUPPORT=y
-CONFIG_IMX_WATCHDOG=y