hwmon: (emc2305) Set initial PWM minimum value during probe based on thermal state

[ Upstream commit 0429415a084a15466e87d504e8c2a502488184a5 ]

Prevent the PWM value from being set to minimum when thermal zone
temperature exceeds any trip point during driver probe. Otherwise, the
PWM fan speed will remains at minimum speed and not respond to
temperature changes.

Signed-off-by: Florin Leotescu <florin.leotescu@nxp.com>
Link: https://lore.kernel.org/r/20250603113125.3175103-5-florin.leotescu@oss.nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/drivers/hwmon/emc2305.c b/drivers/hwmon/emc2305.c
index e42ae43f3de46df0f5d8dc0074c68e4682d24181..286582e99c2845bc59c0849e85183dcdee22e539 100644 (file)
--- a/drivers/hwmon/emc2305.c
+++ b/drivers/hwmon/emc2305.c
@@ -301,6 +301,12 @@ static int emc2305_set_single_tz(struct device *dev, int idx)
                dev_err(dev, "Failed to register cooling device %s\n", emc2305_fan_name[idx]);
                return PTR_ERR(data->cdev_data[cdev_idx].cdev);
        }
+
+       if (data->cdev_data[cdev_idx].cur_state > 0)
+               /* Update pwm when temperature is above trips */
+               pwm = EMC2305_PWM_STATE2DUTY(data->cdev_data[cdev_idx].cur_state,
+                                            data->max_state, EMC2305_FAN_MAX);
+
        /* Set minimal PWM speed. */
        if (data->pwm_separate) {
                ret = emc2305_set_pwm(dev, pwm, cdev_idx);
@@ -314,10 +320,10 @@ static int emc2305_set_single_tz(struct device *dev, int idx)
                }
        }
        data->cdev_data[cdev_idx].cur_state =
-               EMC2305_PWM_DUTY2STATE(data->pwm_min[cdev_idx], data->max_state,
+               EMC2305_PWM_DUTY2STATE(pwm, data->max_state,
                                       EMC2305_FAN_MAX);
        data->cdev_data[cdev_idx].last_hwmon_state =
-               EMC2305_PWM_DUTY2STATE(data->pwm_min[cdev_idx], data->max_state,
+               EMC2305_PWM_DUTY2STATE(pwm, data->max_state,
                                       EMC2305_FAN_MAX);
        return 0;
 }