drm/amdgpu: Power up UVD 3 for FW validation (v2)

[ Upstream commit c661219cd7be75bb5599b525f16a455a058eb516 ]

Unlike later versions, UVD 3 has firmware validation.
For this to work, the UVD should be powered up correctly.

When DPM is enabled and the display clock is off,
the SMU may choose a power state which doesn't power
the UVD, which can result in failure to initialize UVD.

v2:
Add code comments to explain about the UVD power state
and how UVD clock is turned on/off.

Fixes: b38f3e80ecec ("drm amdgpu: SI UVD v3_1 (v2)")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c b/drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c
index 0fef925b66024a7c705bdf251121a14d86546225..e458e0d5801b0fcba1f0dcf344cdaf10729afaa1 100644 (file)
--- a/drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c
+++ b/drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c
@@ -625,7 +625,22 @@ static void uvd_v3_1_enable_mgcg(struct amdgpu_device *adev,
  *
  * @handle: handle used to pass amdgpu_device pointer
  *
- * Initialize the hardware, boot up the VCPU and do some testing
+ * Initialize the hardware, boot up the VCPU and do some testing.
+ *
+ * On SI, the UVD is meant to be used in a specific power state,
+ * or alternatively the driver can manually enable its clock.
+ * In amdgpu we use the dedicated UVD power state when DPM is enabled.
+ * Calling amdgpu_dpm_enable_uvd makes DPM select the UVD power state
+ * for the SMU and afterwards enables the UVD clock.
+ * This is automatically done by amdgpu_uvd_ring_begin_use when work
+ * is submitted to the UVD ring. Here, we have to call it manually
+ * in order to power up UVD before firmware validation.
+ *
+ * Note that we must not disable the UVD clock here, as that would
+ * cause the ring test to fail. However, UVD is powered off
+ * automatically after the ring test: amdgpu_uvd_ring_end_use calls
+ * the UVD idle work handler which will disable the UVD clock when
+ * all fences are signalled.
  */
 static int uvd_v3_1_hw_init(void *handle)
 {
@@ -635,6 +650,15 @@ static int uvd_v3_1_hw_init(void *handle)
        int r;
 
        uvd_v3_1_mc_resume(adev);
+       uvd_v3_1_enable_mgcg(adev, true);
+
+       /* Make sure UVD is powered during FW validation.
+        * It's going to be automatically powered off after the ring test.
+        */
+       if (adev->pm.dpm_enabled)
+               amdgpu_dpm_enable_uvd(adev, true);
+       else
+               amdgpu_asic_set_uvd_clocks(adev, 53300, 40000);
 
        r = uvd_v3_1_fw_validate(adev);
        if (r) {
@@ -642,9 +666,6 @@ static int uvd_v3_1_hw_init(void *handle)
                return r;
        }
 
-       uvd_v3_1_enable_mgcg(adev, true);
-       amdgpu_asic_set_uvd_clocks(adev, 53300, 40000);
-
        uvd_v3_1_start(adev);
 
        r = amdgpu_ring_test_helper(ring);