--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "TCL LINKHUB HH500V";
+ compatible = "tcl,linkhub-hh500v", "qcom,ipq8074";
+
+ aliases {
+ led-boot = &led_power_blue;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_blue;
+ led-upgrade = &led_power_red;
+ serial0 = &blsp1_uart5;
+ serial1 = &blsp1_uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ bootargs-append = " root=/dev/ubiblock0_1";
+ };
+
+ modem {
+ compatible = "gpio-export";
+ pinctrl-names = "default";
+ pinctrl-0 = <&modem_pins>;
+
+ /* output low = download mode */
+ modem-edl {
+ gpio-export,name = "modem_edl";
+ gpio-export,output = <1>;
+ gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* output high = power on, output low = no power on after reset */
+ modem-power {
+ gpio-export,name = "modem_power";
+ gpio-export,output = <1>;
+ gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
+ };
+
+ /* output low 5s pulse = reset */
+ modem-reset {
+ gpio-export,name = "modem_reset";
+ gpio-export,output = <1>;
+ gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-poweroff {
+ compatible = "gpio-poweroff";
+ gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&button_pins>;
+ pinctrl-names = "default";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+ };
+
+ power {
+ label = "power";
+ gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins>;
+
+ 4g_green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "4g";
+ gpios = <&aw9523 0 GPIO_ACTIVE_LOW>;
+ };
+
+ 4g_blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = "4g";
+ gpios = <&aw9523 1 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi_blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_WLAN;
+ gpios = <&aw9523 3 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_blue: power_blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&aw9523 5 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_red: power_red {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+ gpios = <&aw9523 6 GPIO_ACTIVE_LOW>;
+ };
+
+ 5g_red {
+ color = <LED_COLOR_ID_RED>;
+ function = "5g";
+ gpios = <&aw9523 8 GPIO_ACTIVE_LOW>;
+ };
+
+ 5g_green {
+ color = <LED_COLOR_ID_GREEN>;
+ function = "5g";
+ gpios = <&aw9523 9 GPIO_ACTIVE_LOW>;
+ };
+
+ 5g_blue {
+ color = <LED_COLOR_ID_BLUE>;
+ function = "5g";
+ gpios = <&aw9523 10 GPIO_ACTIVE_LOW>;
+ };
+
+ 4g_red {
+ color = <LED_COLOR_ID_RED>;
+ function = "4g";
+ gpios = <&aw9523 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&tlmm {
+ mdio_pins: mdio-pins {
+ mdc {
+ pins = "gpio68";
+ function = "mdc";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+
+ mdio {
+ pins = "gpio69";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+ };
+
+ button_pins: button-pins {
+ bias-pull-up;
+ drive-strength = <8>;
+ function = "gpio";
+ pins = "gpio47", "gpio62", "gpio64";
+ };
+
+ hsuart_pins: hsuart-state {
+ pins = "gpio48", "gpio49";
+ };
+
+ modem_pins: modem-pins {
+ modem_power_on {
+ bias-pull-up;
+ drive-strength = <8>;
+ output-high;
+ pins = "gpio30";
+ };
+
+ modem_reset {
+ drive-strength = <8>;
+ output-high;
+ pins = "gpio29";
+ };
+
+ modem_edl {
+ output-high;
+ pins = "gpio46";
+ };
+ };
+
+ pcie0_default_state: pcie0_wake_gpio {
+ bias-pull-up;
+ drive-strength = <8>;
+ function = "pcie0_wake";
+ pins = "gpio59";
+ };
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ aw9523: gpio-expander@5b {
+ compatible = "awinic,aw9523-pinctrl";
+ reg = <0x5b>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&aw9523 0 0 16>;
+ reset-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+
+ led_pins: led-pins {
+ pins =
+ "gpio0", "gpio1", "gpio3", "gpio5", "gpio6",
+ "gpio8", "gpio9", "gpio10", "gpio11";
+ function = "gpio";
+ input-disable;
+ output-low;
+ };
+ };
+};
+
+&blsp1_spi1 {
+ status = "okay";
+
+ flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x00>;
+ /* "n25q128a11" required for u-boot patching, see nand node */
+ compatible = "n25q128a11", "jedec,spi-nor";
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ };
+ };
+};
+
+&blsp1_uart3 {
+ status = "okay";
+};
+
+&blsp1_uart5 {
+ status = "okay";
+};
+
+&cryptobam {
+ status = "okay";
+};
+
+&crypto {
+ status = "okay";
+};
+
+&prng {
+ status = "okay";
+};
+
+&qpic_bam {
+ status = "okay";
+};
+
+&qpic_nand {
+ status = "okay";
+ /*
+ * Some variants of this board use NOR+NAND configuration which is
+ * currently not supported by 'qcomsmem' MTD parser while other versions
+ * have NAND alone. Let U-Boot find the NAND and SPI flash dt nodes and
+ * populate partitions from SMEM partition table.
+ *
+ * This makes it possible to support both flash configurations with a
+ * single image, and also to use QCA 'runtime failsafe' and rotate
+ * 'rootfs'/'rootfs_1' partitions between subsequent updates.
+ */
+ compatible = "qcom,ebi2-nandc-bam-v1.5.0", "qcom,ipq8074-nand";
+
+ nand@0 {
+ #address-cells = <0x01>;
+ #size-cells = <0x01>;
+ nand-bus-width = <8>;
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <8>;
+ reg = <0>;
+ };
+};
+
+&qusb_phy_0 {
+ status = "okay";
+};
+
+&qusb_phy_1 {
+ status = "okay";
+};
+
+&ssphy_0 {
+ status = "okay";
+};
+
+&ssphy_1 {
+ status = "okay";
+};
+
+&usb_0 {
+ status = "okay";
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&mdio {
+ status = "okay";
+
+ pinctrl-0 = <&mdio_pins>;
+ pinctrl-names = "default";
+ reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+
+ ethernet-phy-package@0 {
+ compatible = "qcom,qca8075-package";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ qca8075_3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ };
+ };
+
+ qca8081: ethernet-phy@16 {
+ compatible = "ethernet-phy-id004d.d101";
+ reg = <16>;
+ reset-deassert-us = <10000>;
+ reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&switch {
+ status = "okay";
+
+ switch_lan_bmp = <ESS_PORT4>;
+ switch_wan_bmp = <ESS_PORT6>;
+ switch_mac_mode = <MAC_MODE_PSGMII>;
+ switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>;
+
+ qcom,port_phyinfo {
+ port@4 {
+ phy_address = <3>;
+ port_id = <4>;
+ };
+
+ port@6 {
+ phy_address = <16>;
+ port_id = <6>;
+ port_mac_sel = "QGMAC_PORT";
+ };
+ };
+};
+
+&edma {
+ status = "okay";
+};
+
+&dp4 {
+ status = "okay";
+ phy-handle = <&qca8075_3>;
+ label = "lan";
+};
+
+&dp6_syn {
+ status = "okay";
+ phy-handle = <&qca8081>;
+ label = "wan";
+};
+
+&pcie_qmp0 {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+ perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
+
+ pcie@0 {
+ modem@0,0 {
+ reg = <0x00 0x00 0x00 0x00 0x00>;
+ };
+ };
+};
+
+&wifi {
+ status = "okay";
+
+ qcom,ath11k-calibration-variant = "TCL-LINKHUB-HH500V";
+};
--- /dev/null
+# based on target/linux/qualcommax/ipq50xx/base-files/lib/upgrade/elecom.sh
+
+. /lib/functions.sh
+
+# Read or update an entry in Qualcomm bootconfig partition
+#
+# parameters:
+# $1: partition name of bootconfig (ex.: "0:bootconfig", "0:bootconfig1", etc)
+# $2: entry name in bootconfig (ex.: "0:hlos", "rootfs", etc)
+# $3: index to set for the entry (0/1)
+#
+# operations:
+# read : bootconfig_rw_index <bootconfig> <entry>
+# write: bootconfig_rw_index <bootconfig> <entry> <index>
+bootconfig_rw_index() {
+ local bootcfg="$1"
+ local partname="$2"
+ local index="$3"
+ local mtdidx
+ local tempfile
+ local current
+
+ if [ -z "$bootcfg" ] || [ -z "$partname" ]; then
+ echo "no value specified for bootconfig or partition entry"
+ return 1
+ fi
+
+ case "$index" in
+ 0|1|"") ;;
+ *) echo "invalid bootconfig index specified \"$index\""; return 1 ;;
+ esac
+
+ mtdidx=$(find_mtd_index "$bootcfg")
+ [ ! "$mtdidx" ] && {
+ echo "cannot find mtd index for $partname"
+ return 1
+ }
+
+ tempfile=/tmp/mtd"$mtdidx".bin
+ dd if=/dev/mtd"$mtdidx" of="$tempfile" bs=1 count=336
+ [ $? -ne 0 ] || [ ! -f "$tempfile" ] && {
+ echo "failed to create a temp copy of /dev/mtd$mtdidx"
+ return 1
+ }
+
+ current=$(get_bootconfig_primaryboot "$tempfile" "$partname")
+
+ if [ -z "$index" ]; then
+ echo "$current"
+ elif [ "$current" != "$index" ]; then
+ set_bootconfig_primaryboot "$tempfile" "$partname" "$index"
+ mtd write "$tempfile" /dev/mtd"$mtdidx" 2>/dev/null
+ [ $? -ne 0 ] && {
+ echo "failed to write temp copy back to /dev/mtd$mtdidx"
+ return 1
+ }
+ fi
+
+ rm "$tempfile"
+}
+
+tcl_swap_active_root() {
+ local index
+
+ index=$(bootconfig_rw_index "0:BOOTCONFIG" rootfs)
+ if [ -z "$index" ]; then
+ v "failed to read bootconfig index..."
+ nand_do_upgrade_failed
+ fi
+
+ if [ "$index" = "1" ]; then
+ bootconfig_rw_index "0:BOOTCONFIG" rootfs 0
+ bootconfig_rw_index "0:BOOTCONFIG1" rootfs 0
+ else
+ bootconfig_rw_index "0:BOOTCONFIG" rootfs 1
+ bootconfig_rw_index "0:BOOTCONFIG1" rootfs 1
+ fi
+}
+
+tcl_upgrade_prepare() {
+ local delay
+
+ delay=$(fw_printenv -n bootdelay)
+ [ -z "$delay" ] || [ "$delay" -eq "0" ] && \
+ fw_setenv bootdelay 3
+
+ if [ -z "$UPGRADE_OPT_USE_CURR_PART" ]; then
+ tcl_swap_active_root
+ CI_UBIPART="rootfs_1"
+ fi
+}
projects / thirdparty / openwrt.git / commitdiff
