Documentation: PCI: endpoint: Fix ntb/vntb copy & paste errors

Fix copy & paste errors by changing the references from 'ntb' to 'vntb'.

Fixes: 4ac8c8e52cd9 ("Documentation: PCI: Add specification for the PCI vNTB function device")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[mani: squashed the patches and fixed more errors]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/b51c2a69ffdbfa2c359f5cf33f3ad2acc3db87e4.1762154911.git.baruch@tkos.co.il

diff --git a/Documentation/PCI/endpoint/pci-vntb-howto.rst b/Documentation/PCI/endpoint/pci-vntb-howto.rst
index 9a7a2f0a68498e8b4297f24261954558d45c43a9..3679f5c3025494ef7afd37f592001bc520da5ef6 100644 (file)
--- a/Documentation/PCI/endpoint/pci-vntb-howto.rst
+++ b/Documentation/PCI/endpoint/pci-vntb-howto.rst
@@ -52,14 +52,14 @@ pci-epf-vntb device, the following commands can be used::
        # cd /sys/kernel/config/pci_ep/
        # mkdir functions/pci_epf_vntb/func1
 
-The "mkdir func1" above creates the pci-epf-ntb function device that will
+The "mkdir func1" above creates the pci-epf-vntb function device that will
 be probed by pci_epf_vntb driver.
 
 The PCI endpoint framework populates the directory with the following
 configurable fields::
 
-       # ls functions/pci_epf_ntb/func1
-       baseclass_code    deviceid          msi_interrupts    pci-epf-ntb.0
+       # ls functions/pci_epf_vntb/func1
+       baseclass_code    deviceid          msi_interrupts    pci-epf-vntb.0
        progif_code       secondary         subsys_id         vendorid
        cache_line_size   interrupt_pin     msix_interrupts   primary
        revid             subclass_code     subsys_vendor_id
@@ -111,13 +111,13 @@ A sample configuration for virtual NTB driver for virtual PCI bus::
        # echo 0x080A > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vntb_pid
        # echo 0x10 > functions/pci_epf_vntb/func1/pci_epf_vntb.0/vbus_number
 
-Binding pci-epf-ntb Device to EP Controller
+Binding pci-epf-vntb Device to EP Controller
 --------------------------------------------
 
 NTB function device should be attached to PCI endpoint controllers
 connected to the host.
 
-       # ln -s controllers/5f010000.pcie_ep functions/pci-epf-ntb/func1/primary
+       # ln -s controllers/5f010000.pcie_ep functions/pci_epf_vntb/func1/primary
 
 Once the above step is completed, the PCI endpoint controllers are ready to
 establish a link with the host.
@@ -139,7 +139,7 @@ lspci Output at Host side
 -------------------------
 
 Note that the devices listed here correspond to the values populated in
-"Creating pci-epf-ntb Device" section above::
+"Creating pci-epf-vntb Device" section above::
 
        # lspci
         00:00.0 PCI bridge: Freescale Semiconductor Inc Device 0000 (rev 01)
@@ -152,7 +152,7 @@ lspci Output at EP Side / Virtual PCI bus
 -----------------------------------------
 
 Note that the devices listed here correspond to the values populated in
-"Creating pci-epf-ntb Device" section above::
+"Creating pci-epf-vntb Device" section above::
 
         # lspci
         10:00.0 Unassigned class [ffff]: Dawicontrol Computersysteme GmbH Device 1234 (rev ff)