arm64: dts: rockchip: Fix UART DMA support for RK3528

Trying to use UART2 DMA for Bluetooth on ArmSoM Sige1 result in tx
timeout when using dma-names = "tx", "rx" as required by the dt-binding:

  Bluetooth: hci0: command 0x0c03 tx timeout
  Bluetooth: hci0: BCM: Reset failed (-110)

Change the dmas order to fix UART DMA support on RK3528.

With this fixed Bluetooth can be loaded using DMA on ArmSoM Sige1:

  Bluetooth: hci0: BCM: chip id 159
  Bluetooth: hci0: BCM: features 0x0f
  Bluetooth: hci0: BCM4362A2
  Bluetooth: hci0: BCM4362A2 (000.017.017) build 0000
  Bluetooth: hci0: BCM4362A2 'brcm/BCM4362A2.hcd' Patch
  Bluetooth: hci0: BCM: features 0x0f
  Bluetooth: hci0: BCM43752A2 UART 37.4MHz Ampak AP6398 sLNA iLNA CL1 [Version: 1091.1173]
  Bluetooth: hci0: BCM4362A2 (000.017.017) build 1173

Fixes: ab6fcb58aedf ("arm64: dts: rockchip: Add UART DMA support for RK3528")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250709210831.3170458-1-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
index b215126efcc23a070fa0a56154bc18770b86ff97..001a555c83b7526d49a156ece06e749cc7697918 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
@@ -595,7 +595,7 @@
                        clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
                        clock-names = "baudclk", "apb_pclk";
                        interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-                       dmas = <&dmac 8>, <&dmac 9>;
+                       dmas = <&dmac 9>, <&dmac 8>;
                        reg-io-width = <4>;
                        reg-shift = <2>;
                        status = "disabled";
@@ -607,7 +607,7 @@
                        clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
                        clock-names = "baudclk", "apb_pclk";
                        interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-                       dmas = <&dmac 10>, <&dmac 11>;
+                       dmas = <&dmac 11>, <&dmac 10>;
                        reg-io-width = <4>;
                        reg-shift = <2>;
                        status = "disabled";
@@ -619,7 +619,7 @@
                        clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
                        clock-names = "baudclk", "apb_pclk";
                        interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-                       dmas = <&dmac 12>, <&dmac 13>;
+                       dmas = <&dmac 13>, <&dmac 12>;
                        reg-io-width = <4>;
                        reg-shift = <2>;
                        status = "disabled";
@@ -631,7 +631,7 @@
                        clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
                        clock-names = "baudclk", "apb_pclk";
                        interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-                       dmas = <&dmac 14>, <&dmac 15>;
+                       dmas = <&dmac 15>, <&dmac 14>;
                        reg-io-width = <4>;
                        reg-shift = <2>;
                        status = "disabled";
@@ -643,7 +643,7 @@
                        clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
                        clock-names = "baudclk", "apb_pclk";
                        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-                       dmas = <&dmac 16>, <&dmac 17>;
+                       dmas = <&dmac 17>, <&dmac 16>;
                        reg-io-width = <4>;
                        reg-shift = <2>;
                        status = "disabled";
@@ -655,7 +655,7 @@
                        clocks = <&cru SCLK_UART5>, <&cru PCLK_UART5>;
                        clock-names = "baudclk", "apb_pclk";
                        interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-                       dmas = <&dmac 18>, <&dmac 19>;
+                       dmas = <&dmac 19>, <&dmac 18>;
                        reg-io-width = <4>;
                        reg-shift = <2>;
                        status = "disabled";
@@ -667,7 +667,7 @@
                        clocks = <&cru SCLK_UART6>, <&cru PCLK_UART6>;
                        clock-names = "baudclk", "apb_pclk";
                        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-                       dmas = <&dmac 20>, <&dmac 21>;
+                       dmas = <&dmac 21>, <&dmac 20>;
                        reg-io-width = <4>;
                        reg-shift = <2>;
                        status = "disabled";
@@ -679,7 +679,7 @@
                        clocks = <&cru SCLK_UART7>, <&cru PCLK_UART7>;
                        clock-names = "baudclk", "apb_pclk";
                        interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-                       dmas = <&dmac 22>, <&dmac 23>;
+                       dmas = <&dmac 23>, <&dmac 22>;
                        reg-io-width = <4>;
                        reg-shift = <2>;
                        status = "disabled";