/* User settable parameters */
-#undef TULIP_DEBUG
-#undef TULIP_DEBUG_WHERE
-#ifdef TULIP_DEBUG
-static int tulip_debug = 2; /* 1 normal messages, 0 quiet .. 7 verbose. */
-#endif
-
#define TX_TIME_OUT 2*TICKS_PER_SEC
/* helpful macros if on a big_endian machine for changing byte order.
static void tulip_wait(unsigned int nticks);
-#ifdef TULIP_DEBUG_WHERE
-static void whereami(const char *str);
-#endif
-
-#ifdef TULIP_DEBUG
-static void tulip_more(void);
-#endif
-
\f
/*********************************************************************/
/* Utility Routines */
/*********************************************************************/
-#ifdef TULIP_DEBUG_WHERE
-static void whereami (const char *str, struct pci_device *pci)
+static void whereami (const char *str)
{
- printf("%s: %s\n", tp->nic_name, str);
+ DBGP("%s\n", str);
/* sleep(2); */
}
-#endif
-
-#ifdef TULIP_DEBUG
-static void tulip_more(void)
-{
- printf("\n\n-- more --");
- while (!iskey())
- /* wait */;
- getchar();
- printf("\n\n");
-}
-#endif /* TULIP_DEBUG */
static void tulip_wait(unsigned int nticks)
{
int retval = 0;
long mdio_addr = ioaddr + CSR9;
-#ifdef TULIP_DEBUG_WHERE
whereami("mdio_read\n");
-#endif
if (tp->chip_id == LC82C168) {
int i = 1000;
int cmd = (0x5002 << 16) | (phy_id << 23) | (location<<18) | value;
long mdio_addr = ioaddr + CSR9;
-#ifdef TULIP_DEBUG_WHERE
whereami("mdio_write\n");
-#endif
if (tp->chip_id == LC82C168) {
int i = 1000;
long ee_addr = ioaddr + CSR9;
int read_cmd = location | EE_READ_CMD;
-#ifdef TULIP_DEBUG_WHERE
whereami("read_eeprom\n");
-#endif
outl(EE_ENB & ~EE_CS, ee_addr);
outl(EE_ENB, ee_addr);
int new_advertise = 0;
int i;
-#ifdef TULIP_DEBUG_WHERE
whereami("parse_eeprom\n");
-#endif
tp->mtable = 0;
/* Detect an old-style (SA only) EEPROM layout:
i++; /* An Accton EN1207, not an outlaw Maxtech. */
memcpy(ee_data + 26, eeprom_fixups[i].newtable,
sizeof(eeprom_fixups[i].newtable));
-#ifdef TULIP_DEBUG
- printf("%s: Old format EEPROM on '%s' board.\n%s: Using substitute media control info.\n",
+ DBG("%s: Old format EEPROM on '%s' board.\n%s: Using substitute media control info.\n",
tp->nic_name, eeprom_fixups[i].name, tp->nic_name);
-#endif
break;
}
}
if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
-#ifdef TULIP_DEBUG
- printf("%s: Old style EEPROM with no media selection information.\n",
+ DBG("%s: Old style EEPROM with no media selection information.\n",
tp->nic_name);
-#endif
return;
}
}
if (ee_data[19] > 1) {
-#ifdef TULIP_DEBUG
- printf("%s: Multiport cards (%d ports) may not work correctly.\n",
+ DBG("%s: Multiport cards (%d ports) may not work correctly.\n",
tp->nic_name, ee_data[19]);
-#endif
}
p = (void *)ee_data + ee_data[27];
if (ee_data[27] == 0) { /* No valid media table. */
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1) {
- printf("%s: No Valid Media Table. ee_data[27] = %hhX\n",
- tp->nic_name, ee_data[27]);
- }
-#endif
+ DBG2("%s: No Valid Media Table. ee_data[27] = %hhX\n",
+ tp->nic_name, ee_data[27]);
} else if (tp->chip_id == DC21041) {
int media = get_u16(p);
int count = p[2];
p += 3;
- printf("%s: 21041 Media table, default media %hX (%s).\n",
+ DBG("%s: 21041 Media table, default media %hX (%s).\n",
tp->nic_name, media,
media & 0x0800 ? "Autosense" : medianame[media & 15]);
for (i = 0; i < count; i++) {
case 0: new_advertise |= 0x0020; break;
case 4: new_advertise |= 0x0040; break;
}
- printf("%s: 21041 media #%d, %s.\n",
+ DBG("%s: 21041 media #%d, %s.\n",
tp->nic_name, media_code, medianame[media_code]);
}
} else {
mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
mtable->csr15dir = mtable->csr15val = 0;
- printf("%s: EEPROM default media type %s.\n", tp->nic_name,
+ DBG("%s: EEPROM default media type %s.\n", tp->nic_name,
media & 0x0800 ? "Autosense" : medianame[media & MEDIA_MASK]);
for (i = 0; i < count; i++) {
leaf->leafdata = p + 2;
p += (p[0] & 0x3f) + 1;
}
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1 && leaf->media == 11) {
+ if (leaf->media == 11) {
unsigned char *bp = leaf->leafdata;
- printf("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %hhX %hhX.\n",
- tp->nic_name, bp[0], bp[1], bp[2 + bp[1]*2],
- bp[5 + bp[2 + bp[1]*2]*2], bp[4 + bp[2 + bp[1]*2]*2]);
+ DBG2("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %hhX %hhX.\n",
+ tp->nic_name, bp[0], bp[1], bp[2 + bp[1]*2],
+ bp[5 + bp[2 + bp[1]*2]*2], bp[4 + bp[2 + bp[1]*2]*2]);
}
-#endif
- printf("%s: Index #%d - Media %s (#%d) described "
+ DBG("%s: Index #%d - Media %s (#%d) described "
"by a %s (%d) block.\n",
tp->nic_name, i, medianame[leaf->media], leaf->media,
leaf->type < 6 ? block_name[leaf->type] : "UNKNOWN",
{
int i;
-#ifdef TULIP_DEBUG_WHERE
whereami("tulip_init_ring\n");
-#endif
tp->cur_rx = 0;
int i;
unsigned long to;
-#ifdef TULIP_DEBUG_WHERE
whereami("tulip_reset\n");
-#endif
/* Stop Tx and RX */
outl(inl(ioaddr + CSR6) & ~0x00002002, ioaddr + CSR6);
/* wait */ ;
if (currticks() >= to) {
- printf ("%s: TX Setup Timeout.\n", tp->nic_name);
+ DBG ("%s: TX Setup Timeout.\n", tp->nic_name);
}
}
u32 to;
u32 csr6 = inl(ioaddr + CSR6);
-#ifdef TULIP_DEBUG_WHERE
whereami("tulip_transmit\n");
-#endif
/* Disable Tx */
outl(csr6 & ~0x00002000, ioaddr + CSR6);
while (s < ETH_ZLEN)
txb[s++] = '\0';
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: sending %d bytes ethtype %hX\n", tp->nic_name, s, t);
-#endif
+ DBG2("%s: sending %d bytes ethtype %hX\n", tp->nic_name, s, t);
/* setup the transmit descriptor */
/* 0x60000000 = no interrupt on completion */
/* wait */ ;
if (currticks() >= to) {
- printf ("TX Timeout!\n");
+ DBG ("TX Timeout!\n");
}
/* Disable Tx */
static int tulip_poll(struct nic *nic, int retrieve)
{
-#ifdef TULIP_DEBUG_WHERE
whereami("tulip_poll\n");
-#endif
/* no packet waiting. packet still owned by NIC */
if (rx_ring[tp->cur_rx].status & 0x80000000)
if ( ! retrieve ) return 1;
-#ifdef TULIP_DEBUG_WHERE
whereami("tulip_poll got one\n");
-#endif
nic->packetlen = (rx_ring[tp->cur_rx].status & 0x3FFF0000) >> 16;
/*********************************************************************/
static void tulip_disable ( struct nic *nic ) {
-#ifdef TULIP_DEBUG_WHERE
whereami("tulip_disable\n");
-#endif
tulip_reset(nic);
/* Clear the missed-packet counter. */
inl(ioaddr + CSR8);
- printf("\n"); /* so we start on a fresh line */
-#ifdef TULIP_DEBUG_WHERE
+ DBG("\n"); /* so we start on a fresh line */
whereami("tulip_probe\n");
-#endif
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf ("%s: Looking for Tulip Chip: Vendor=%hX Device=%hX\n", tp->nic_name,
- tp->vendor, tp->dev_id);
-#endif
+ DBG2 ("%s: Looking for Tulip Chip: Vendor=%hX Device=%hX\n", tp->nic_name,
+ tp->vendor_id, tp->dev_id);
/* Figure out which chip we're dealing with */
i = 0;
}
if (chip_idx == -1) {
- printf ("%s: Unknown Tulip Chip: Vendor=%hX Device=%hX\n", tp->nic_name,
+ DBG ("%s: Unknown Tulip Chip: Vendor=%hX Device=%hX\n", tp->nic_name,
tp->vendor_id, tp->dev_id);
return 0;
}
tp->pci_id_idx = i;
tp->flags = tulip_tbl[chip_idx].flags;
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1) {
- printf ("%s: tp->pci_id_idx == %d, name == %s\n", tp->nic_name,
- tp->pci_id_idx, pci_id_tbl[tp->pci_id_idx].name);
- printf ("%s: chip_idx == %d, name == %s\n", tp->nic_name, chip_idx,
- tulip_tbl[chip_idx].chip_name);
- }
-#endif
+ DBG2 ("%s: tp->pci_id_idx == %d, name == %s\n", tp->nic_name,
+ tp->pci_id_idx, pci_id_tbl[tp->pci_id_idx].name);
+ DBG2 ("%s: chip_idx == %d, name == %s\n", tp->nic_name, chip_idx,
+ tulip_tbl[chip_idx].chip_name);
/* Bring the 21041/21143 out of sleep mode.
Caution: Snooze mode does not work with some boards! */
pci_write_config_dword(pci, 0x40, 0x00000000);
if (inl(ioaddr + CSR5) == 0xFFFFFFFF) {
- printf("%s: The Tulip chip at %X is not functioning.\n",
+ DBG("%s: The Tulip chip at %X is not functioning.\n",
tp->nic_name, (unsigned int) ioaddr);
return 0;
}
pci_read_config_byte(pci, PCI_REVISION, &chip_rev);
- printf("%s: [chip: %s] rev %d at %hX\n", tp->nic_name,
+ DBG("%s: [chip: %s] rev %d at %hX\n", tp->nic_name,
tulip_tbl[chip_idx].chip_name, chip_rev, (unsigned int) ioaddr);
- printf("%s: Vendor=%hX Device=%hX", tp->nic_name, tp->vendor_id, tp->dev_id);
+ DBG("%s: Vendor=%hX Device=%hX", tp->nic_name, tp->vendor_id, tp->dev_id);
if (chip_idx == DC21041 && inl(ioaddr + CSR9) & 0x8000) {
- printf(" 21040 compatible mode.");
+ DBG(" 21040 compatible mode.");
chip_idx = DC21040;
}
- printf("\n");
+ DBG("\n");
/* The SROM/EEPROM interface varies dramatically. */
sum = 0;
}
if (sum == 0 || sum == ETH_ALEN*0xff) {
- printf("%s: EEPROM not present!\n", tp->nic_name);
+ DBG("%s: EEPROM not present!\n", tp->nic_name);
for (i = 0; i < ETH_ALEN-1; i++)
nic->node_addr[i] = last_phys_addr[i];
nic->node_addr[i] = last_phys_addr[i] + 1;
{
int i;
-#ifdef TULIP_DEBUG_WHERE
whereami("start_link\n");
-#endif
if ((tp->flags & ALWAYS_CHECK_MII) ||
(tp->mtable && tp->mtable->has_mii) ||
tp->mii_advertise = to_advert = mii_advert;
tp->phys[phy_idx++] = phy;
- printf("%s: MII transceiver %d config %hX status %hX advertising %hX.\n",
+ DBG("%s: MII transceiver %d config %hX status %hX advertising %hX.\n",
tp->nic_name, phy, mii_reg0, mii_status, mii_advert);
/* Fixup for DLink with miswired PHY. */
if (mii_advert != to_advert) {
- printf("%s: Advertising %hX on PHY %d previously advertising %hX.\n",
+ DBG("%s: Advertising %hX on PHY %d previously advertising %hX.\n",
tp->nic_name, to_advert, phy, mii_advert);
mdio_write(nic, phy, 4, to_advert);
}
}
tp->mii_cnt = phy_idx;
if (tp->mtable && tp->mtable->has_mii && phy_idx == 0) {
- printf("%s: ***WARNING***: No MII transceiver found!\n",
+ DBG("%s: ***WARNING***: No MII transceiver found!\n",
tp->nic_name);
tp->phys[0] = 1;
}
int csr14 = ((tp->sym_advertise & 0x0780) << 9) |
((tp->sym_advertise&0x0020)<<1) | 0xffbf;
-#ifdef TULIP_DEBUG_WHERE
whereami("nway_start\n");
-#endif
tp->if_port = 0;
tp->nway = tp->mediasense = 1;
tp->csr6 = 0x01000000 | (tp->sym_advertise & 0x0040 ? 0x0200 : 0);
return;
}
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: Restarting internal NWay autonegotiation, %X.\n",
- tp->nic_name, csr14);
-#endif
+ DBG2("%s: Restarting internal NWay autonegotiation, %X.\n",
+ tp->nic_name, csr14);
outl(0x0001, ioaddr + CSR13);
outl(csr14, ioaddr + CSR14);
tp->csr6 = 0x82420000 | (tp->sym_advertise & 0x0040 ? 0x0200 : 0);
{
int i;
-#ifdef TULIP_DEBUG_WHERE
whereami("init_media\n");
-#endif
tp->saved_if_port = tp->if_port;
if (tp->if_port == 0)
(tp->if_port == 12 ? 0 : tp->if_port);
for (i = 0; i < tp->mtable->leafcount; i++)
if (tp->mtable->mleaf[i].media == looking_for) {
- printf("%s: Using user-specified media %s.\n",
+ DBG("%s: Using user-specified media %s.\n",
tp->nic_name, medianame[tp->if_port]);
goto media_picked;
}
int looking_for = tp->mtable->defaultmedia & 15;
for (i = 0; i < tp->mtable->leafcount; i++)
if (tp->mtable->mleaf[i].media == looking_for) {
- printf("%s: Using EEPROM-set media %s.\n",
+ DBG("%s: Using EEPROM-set media %s.\n",
tp->nic_name, medianame[looking_for]);
goto media_picked;
}
case DC21142:
if (tp->mii_cnt) {
select_media(nic, 1);
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: Using MII transceiver %d, status %hX.\n",
- tp->nic_name, tp->phys[0], mdio_read(nic, tp->phys[0], 1));
-#endif
+ DBG2("%s: Using MII transceiver %d, status %hX.\n",
+ tp->nic_name, tp->phys[0], mdio_read(nic, tp->phys[0], 1));
outl(0x82020000, ioaddr + CSR6);
tp->csr6 = 0x820E0000;
tp->if_port = 11;
u32 phy_reg = inl(ioaddr + 0xB8);
u32 new_csr6 = tp->csr6 & ~0x40C40200;
-#ifdef TULIP_DEBUG_WHERE
whereami("pnic_do_nway\n");
-#endif
if (phy_reg & 0x78000000) { /* Ignore baseT4 */
if (phy_reg & 0x20000000) tp->if_port = 5;
tp->full_duplex = 1;
new_csr6 |= 0x00000200;
}
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: PNIC autonegotiated status %X, %s.\n",
- tp->nic_name, phy_reg, medianame[tp->if_port]);
-#endif
+ DBG2("%s: PNIC autonegotiated status %X, %s.\n",
+ tp->nic_name, phy_reg, medianame[tp->if_port]);
if (tp->csr6 != new_csr6) {
tp->csr6 = new_csr6;
outl(tp->csr6 | 0x0002, ioaddr + CSR6); /* Restart Tx */
u32 new_csr6;
int i;
-#ifdef TULIP_DEBUG_WHERE
whereami("select_media\n");
-#endif
if (mtable) {
struct medialeaf *mleaf = &mtable->mleaf[tp->cur_index];
unsigned char *p = mleaf->leafdata;
switch (mleaf->type) {
case 0: /* 21140 non-MII xcvr. */
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: Using a 21140 non-MII transceiver"
- " with control setting %hhX.\n",
- tp->nic_name, p[1]);
-#endif
+ DBG2("%s: Using a 21140 non-MII transceiver"
+ " with control setting %hhX.\n",
+ tp->nic_name, p[1]);
tp->if_port = p[0];
if (startup)
outl(mtable->csr12dir | 0x100, ioaddr + CSR12);
if (startup && mtable->has_reset) {
struct medialeaf *rleaf = &mtable->mleaf[mtable->has_reset];
unsigned char *rst = rleaf->leafdata;
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: Resetting the transceiver.\n",
- tp->nic_name);
-#endif
+ DBG2("%s: Resetting the transceiver.\n",
+ tp->nic_name);
for (i = 0; i < rst[0]; i++)
outl(get_u16(rst + 1 + (i<<1)) << 16, ioaddr + CSR15);
}
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: 21143 non-MII %s transceiver control "
- "%hX/%hX.\n",
- tp->nic_name, medianame[tp->if_port], setup[0], setup[1]);
-#endif
+ DBG2("%s: 21143 non-MII %s transceiver control %hX/%hX.\n",
+ tp->nic_name, medianame[tp->if_port], setup[0], setup[1]);
if (p[0] & 0x40) { /* SIA (CSR13-15) setup values are provided. */
csr13val = setup[0];
csr14val = setup[1];
outl(csr15val, ioaddr + CSR15); /* Data */
if (startup) outl(csr13val, ioaddr + CSR13);
}
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: Setting CSR15 to %X/%X.\n",
- tp->nic_name, csr15dir, csr15val);
-#endif
+ DBG2("%s: Setting CSR15 to %X/%X.\n",
+ tp->nic_name, csr15dir, csr15val);
if (mleaf->type == 4)
new_csr6 = 0x82020000 | ((setup[2] & 0x71) << 18);
else
if (startup < 2) {
if (tp->mii_advertise == 0)
tp->mii_advertise = tp->advertising[phy_num];
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: Advertising %hX on MII %d.\n",
- tp->nic_name, tp->mii_advertise, tp->phys[phy_num]);
-#endif
+ DBG2("%s: Advertising %hX on MII %d.\n",
+ tp->nic_name, tp->mii_advertise, tp->phys[phy_num]);
mdio_write(nic, tp->phys[phy_num], 4, tp->mii_advertise);
}
break;
}
default:
- printf("%s: Invalid media table selection %d.\n",
+ DBG("%s: Invalid media table selection %d.\n",
tp->nic_name, mleaf->type);
new_csr6 = 0x020E0000;
}
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: Using media type %s, CSR12 is %hhX.\n",
- tp->nic_name, medianame[tp->if_port],
- inl(ioaddr + CSR12) & 0xff);
-#endif
+ DBG2("%s: Using media type %s, CSR12 is %hhX.\n",
+ tp->nic_name, medianame[tp->if_port],
+ inl(ioaddr + CSR12) & 0xff);
} else if (tp->chip_id == DC21041) {
int port = tp->if_port <= 4 ? tp->if_port : 0;
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: 21041 using media %s, CSR12 is %hX.\n",
- tp->nic_name, medianame[port == 3 ? 12: port],
- inl(ioaddr + CSR12));
-#endif
+ DBG2("%s: 21041 using media %s, CSR12 is %hX.\n",
+ tp->nic_name, medianame[port == 3 ? 12: port],
+ inl(ioaddr + CSR12));
outl(0x00000000, ioaddr + CSR13); /* Reset the serial interface */
outl(t21041_csr14[port], ioaddr + CSR14);
outl(t21041_csr15[port], ioaddr + CSR15);
} else if (tp->chip_id == LC82C168) {
if (startup && ! tp->medialock)
tp->if_port = tp->mii_cnt ? 11 : 0;
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: PNIC PHY status is %hX, media %s.\n",
- tp->nic_name, inl(ioaddr + 0xB8), medianame[tp->if_port]);
-#endif
+ DBG2("%s: PNIC PHY status is %hX, media %s.\n",
+ tp->nic_name, inl(ioaddr + 0xB8), medianame[tp->if_port]);
if (tp->mii_cnt) {
new_csr6 = 0x810C0000;
outl(0x0001, ioaddr + CSR15);
}
} else if (tp->chip_id == DC21040) { /* 21040 */
/* Turn on the xcvr interface. */
-#ifdef TULIP_DEBUG
int csr12 = inl(ioaddr + CSR12);
- if (tulip_debug > 1)
- printf("%s: 21040 media type is %s, CSR12 is %hhX.\n",
- tp->nic_name, medianame[tp->if_port], csr12);
-#endif
+ DBG2("%s: 21040 media type is %s, CSR12 is %hhX.\n",
+ tp->nic_name, medianame[tp->if_port], csr12);
if (media_cap[tp->if_port] & MediaAlwaysFD)
tp->full_duplex = 1;
new_csr6 = 0x20000;
new_csr6 = 0x028600000;
} else
new_csr6 = 0x038600000;
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: No media description table, assuming "
- "%s transceiver, CSR12 %hhX.\n",
- tp->nic_name, medianame[tp->if_port],
- inl(ioaddr + CSR12));
-#endif
+ DBG2("%s: No media description table, assuming "
+ "%s transceiver, CSR12 %hhX.\n",
+ tp->nic_name, medianame[tp->if_port],
+ inl(ioaddr + CSR12));
}
tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0);
bmsr = mdio_read(nic, tp->phys[0], 1);
lpa = mdio_read(nic, tp->phys[0], 5);
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: MII status %#x, Link partner report "
- "%#x.\n", tp->nic_name, bmsr, lpa);
-#endif
+ DBG2("%s: MII status %#x, Link partner report %#x.\n",
+ tp->nic_name, bmsr, lpa);
if (bmsr == 0xffff)
return -2;
if ((bmsr & 4) == 0) {
int new_bmsr = mdio_read(nic, tp->phys[0], 1);
if ((new_bmsr & 4) == 0) {
-#ifdef TULIP_DEBUG
- if (tulip_debug > 1)
- printf("%s: No link beat on the MII interface,"
- " status %#x.\n", tp->nic_name,
- new_bmsr);
-#endif
+ DBG2("%s: No link beat on the MII interface,"
+ " status %#x.\n", tp->nic_name,
+ new_bmsr);
return -1;
}
}
if (new_csr6 != tp->csr6) {
tp->csr6 = new_csr6;
-#ifdef TULIP_DEBUG
- if (tulip_debug > 0)
- printf("%s: Setting %s-duplex based on MII"
- "#%d link partner capability of %#x.\n",
- tp->nic_name,
- tp->full_duplex ? "full" : "half",
- tp->phys[0], lpa);
-#endif
+ DBG("%s: Setting %s-duplex based on MII"
+ "#%d link partner capability of %#x.\n",
+ tp->nic_name,
+ tp->full_duplex ? "full" : "half",
+ tp->phys[0], lpa);
return 1;
}
projects / thirdparty / ipxe.git / commitdiff
