#include <linux/clk.h>
#include <linux/regulator/consumer.h>
#include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include "phy-generic.h"
return 0;
}
-int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
- struct usb_phy_generic_platform_data *pdata)
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
{
enum usb_phy_type type = USB_PHY_TYPE_USB2;
int err = 0;
needs_vcc = of_property_read_bool(node, "vcc-supply");
needs_clk = of_property_read_bool(node, "clocks");
- nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
- GPIOD_ASIS);
- err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
- if (!err) {
- nop->gpiod_vbus = devm_gpiod_get_optional(dev,
- "vbus-detect",
- GPIOD_ASIS);
- err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
- }
- } else if (pdata) {
- type = pdata->type;
- clk_rate = pdata->clk_rate;
- needs_vcc = pdata->needs_vcc;
- if (gpio_is_valid(pdata->gpio_reset)) {
- err = devm_gpio_request_one(dev, pdata->gpio_reset,
- GPIOF_ACTIVE_LOW,
- dev_name(dev));
- if (!err)
- nop->gpiod_reset =
- gpio_to_desc(pdata->gpio_reset);
- }
- nop->gpiod_vbus = pdata->gpiod_vbus;
+ }
+ nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
+ GPIOD_ASIS);
+ err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
+ if (!err) {
+ nop->gpiod_vbus = devm_gpiod_get_optional(dev,
+ "vbus-detect",
+ GPIOD_ASIS);
+ err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
}
if (err == -EPROBE_DEFER)
if (!nop)
return -ENOMEM;
- err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
+ err = usb_phy_gen_create_phy(dev, nop);
if (err)
return err;
if (nop->gpiod_vbus) {
int usb_gen_phy_init(struct usb_phy *phy);
void usb_gen_phy_shutdown(struct usb_phy *phy);
-int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
- struct usb_phy_generic_platform_data *pdata);
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop);
#endif
#define __LINUX_USB_NOP_XCEIV_H
#include <linux/usb/otg.h>
-#include <linux/gpio/consumer.h>
-
-struct usb_phy_generic_platform_data {
- enum usb_phy_type type;
- unsigned long clk_rate;
-
- /* if set fails with -EPROBE_DEFER if can't get regulator */
- unsigned int needs_vcc:1;
- unsigned int needs_reset:1; /* deprecated */
- int gpio_reset;
- struct gpio_desc *gpiod_vbus;
-};
#if IS_ENABLED(CONFIG_NOP_USB_XCEIV)
/* sometimes transceivers are accessed only through e.g. ULPI */