# If isolated CPUs have been reserved at boot time (as shown in
# cpuset.cpus.isolated), these isolated CPUs should be outside of CPUs 0-8
# that will be used by this script for testing purpose. If not, some of
-# the tests may fail incorrectly. These pre-isolated CPUs should stay in
-# an isolated state throughout the testing process for now.
+# the tests may fail incorrectly. Wait a bit and retry again just in case
+# these isolated CPUs are leftover from previous run and have just been
+# cleaned up earlier in this script.
+#
+# These pre-isolated CPUs should stay in an isolated state throughout the
+# testing process for now.
#
BOOT_ISOLCPUS=$(cat $CGROUP2/cpuset.cpus.isolated)
+[[ -n "$BOOT_ISOLCPUS" ]] && {
+ sleep 0.5
+ BOOT_ISOLCPUS=$(cat $CGROUP2/cpuset.cpus.isolated)
+}
if [[ -n "$BOOT_ISOLCPUS" ]]
then
[[ $(echo $BOOT_ISOLCPUS | sed -e "s/[,-].*//") -le 8 ]] &&
skip_test "Pre-isolated CPUs ($BOOT_ISOLCPUS) overlap CPUs to be tested"
echo "Pre-isolated CPUs: $BOOT_ISOLCPUS"
fi
+
cleanup()
{
online_cpus
cd $CGROUP2
- rmdir A1/A2/A3 A1/A2 A1 B1 > /dev/null 2>&1
- rmdir test > /dev/null 2>&1
+ rmdir A1/A2/A3 A1/A2 A1 B1 test/A1 test/B1 test > /dev/null 2>&1
[[ -n "$SCHED_DEBUG" ]] &&
echo "$SCHED_DEBUG" > /sys/kernel/debug/sched/verbose
}
#
# Cgroup test hierarchy
#
-# root -- A1 -- A2 -- A3
-# +- B1
+# root
+# |
+# +------+------+
+# | |
+# A1 B1
+# |
+# A2
+# |
+# A3
#
# P<v> = set cpus.partition (0:member, 1:root, 2:isolated)
# C<l> = add cpu-list to cpuset.cpus
# X<l> = add cpu-list to cpuset.cpus.exclusive
# S<p> = use prefix in subtree_control
# T = put a task into cgroup
+# CX<l> = add cpu-list to both cpuset.cpus and cpuset.cpus.exclusive
# O<c>=<v> = Write <v> to CPU online file of <c>
#
# ECPUs - effective CPUs of cpusets
PFILE=$CGRP/cpuset.cpus.partition
CFILE=$CGRP/cpuset.cpus
XFILE=$CGRP/cpuset.cpus.exclusive
- S=$(expr substr $CMD 1 1)
- if [[ $S = S ]]
- then
- PREFIX=${CMD#?}
+ case $CMD in
+ S*) PREFIX=${CMD#?}
COMM="echo ${PREFIX}${CTRL} > $SFILE"
eval $COMM $REDIRECT
- elif [[ $S = X ]]
- then
+ ;;
+ X*)
CPUS=${CMD#?}
COMM="echo $CPUS > $XFILE"
eval $COMM $REDIRECT
- elif [[ $S = C ]]
- then
- CPUS=${CMD#?}
+ ;;
+ CX*)
+ CPUS=${CMD#??}
+ COMM="echo $CPUS > $CFILE; echo $CPUS > $XFILE"
+ eval $COMM $REDIRECT
+ ;;
+ C*) CPUS=${CMD#?}
COMM="echo $CPUS > $CFILE"
eval $COMM $REDIRECT
- elif [[ $S = P ]]
- then
- VAL=${CMD#?}
+ ;;
+ P*) VAL=${CMD#?}
case $VAL in
0) VAL=member
;;
esac
COMM="echo $VAL > $PFILE"
eval $COMM $REDIRECT
- elif [[ $S = O ]]
- then
- VAL=${CMD#?}
+ ;;
+ O*) VAL=${CMD#?}
write_cpu_online $VAL
- elif [[ $S = T ]]
- then
- COMM="echo 0 > $TFILE"
+ ;;
+ T*) COMM="echo 0 > $TFILE"
eval $COMM $REDIRECT
- fi
+ ;;
+ *) echo "Unknown command: $CMD"
+ exit 1
+ ;;
+ esac
RET=$?
[[ $RET -ne 0 ]] && {
[[ -n "$SHOWERR" ]] && {
}
#
-# Return 1 if the list of effective cpus isn't the same as the initial list.
+# Remove all the test cgroup directories
#
reset_cgroup_states()
{
echo 0 > $CGROUP2/cgroup.procs
online_cpus
- rmdir A1/A2/A3 A1/A2 A1 B1 > /dev/null 2>&1
- pause 0.02
- set_ctrl_state . R-
- pause 0.01
+ rmdir $RESET_LIST > /dev/null 2>&1
}
dump_states()
{
- for DIR in . A1 A1/A2 A1/A2/A3 B1
+ for DIR in $CGROUP_LIST
do
CPUS=$DIR/cpuset.cpus
ECPUS=$DIR/cpuset.cpus.effective
done
}
+#
+# Set the actual cgroup directory into $CGRP_DIR
+# $1 - cgroup name
+#
+set_cgroup_dir()
+{
+ CGRP_DIR=$1
+ [[ $CGRP_DIR = A2 ]] && CGRP_DIR=A1/A2
+ [[ $CGRP_DIR = A3 ]] && CGRP_DIR=A1/A2/A3
+ [[ $CGRP_DIR = c11 ]] && CGRP_DIR=p1/c11
+ [[ $CGRP_DIR = c12 ]] && CGRP_DIR=p1/c12
+ [[ $CGRP_DIR = c21 ]] && CGRP_DIR=p2/c21
+ [[ $CGRP_DIR = c22 ]] && CGRP_DIR=p2/c22
+}
+
#
# Check effective cpus
# $1 - check string, format: <cgroup>:<cpu-list>[|<cgroup>:<cpu-list>]*
do
set -- $(echo $CHK | sed -e "s/:/ /g")
CGRP=$1
- CPUS=$2
+ EXPECTED_CPUS=$2
+ ACTUAL_CPUS=
if [[ $CGRP = X* ]]
then
CGRP=${CGRP#X}
else
FILE=cpuset.cpus.effective
fi
- [[ $CGRP = A2 ]] && CGRP=A1/A2
- [[ $CGRP = A3 ]] && CGRP=A1/A2/A3
- [[ -e $CGRP/$FILE ]] || return 1
- [[ $CPUS = $(cat $CGRP/$FILE) ]] || return 1
+ set_cgroup_dir $CGRP
+ [[ -e $CGRP_DIR/$FILE ]] || return 1
+ ACTUAL_CPUS=$(cat $CGRP_DIR/$FILE)
+ [[ $EXPECTED_CPUS = $ACTUAL_CPUS ]] || return 1
done
}
do
set -- $(echo $CHK | sed -e "s/:/ /g")
CGRP=$1
- CGRP_DIR=$CGRP
- STATE=$2
+ EXPECTED_STATE=$2
FILE=
- EVAL=$(expr substr $STATE 2 2)
- [[ $CGRP = A2 ]] && CGRP_DIR=A1/A2
- [[ $CGRP = A3 ]] && CGRP_DIR=A1/A2/A3
+ EVAL=$(expr substr $EXPECTED_STATE 2 2)
- case $STATE in
+ set_cgroup_dir $CGRP
+ case $EXPECTED_STATE in
P*) FILE=$CGRP_DIR/cpuset.cpus.partition
;;
- *) echo "Unknown state: $STATE!"
+ *) echo "Unknown state: $EXPECTED_STATE!"
exit 1
;;
esac
- VAL=$(cat $FILE)
+ ACTUAL_STATE=$(cat $FILE)
- case "$VAL" in
+ case "$ACTUAL_STATE" in
member) VAL=0
;;
root) VAL=1
[[ $VAL -eq 1 && $VERBOSE -gt 0 ]] && {
DOMS=$(cat $CGRP_DIR/cpuset.cpus.effective)
[[ -n "$DOMS" ]] &&
- echo " [$CGRP] sched-domain: $DOMS" > $CONSOLE
+ echo " [$CGRP_DIR] sched-domain: $DOMS" > $CONSOLE
}
done
return 0
#
check_isolcpus()
{
- EXPECT_VAL=$1
- ISOLCPUS=
+ EXPECTED_ISOLCPUS=$1
+ ISCPUS=${CGROUP2}/cpuset.cpus.isolated
+ ISOLCPUS=$(cat $ISCPUS)
LASTISOLCPU=
SCHED_DOMAINS=/sys/kernel/debug/sched/domains
- ISCPUS=${CGROUP2}/cpuset.cpus.isolated
- if [[ $EXPECT_VAL = . ]]
+ if [[ $EXPECTED_ISOLCPUS = . ]]
then
- EXPECT_VAL=
- EXPECT_VAL2=
- elif [[ $(expr $EXPECT_VAL : ".*|.*") > 0 ]]
+ EXPECTED_ISOLCPUS=
+ EXPECTED_SDOMAIN=
+ elif [[ $(expr $EXPECTED_ISOLCPUS : ".*|.*") > 0 ]]
then
- set -- $(echo $EXPECT_VAL | sed -e "s/|/ /g")
- EXPECT_VAL=$1
- EXPECT_VAL2=$2
+ set -- $(echo $EXPECTED_ISOLCPUS | sed -e "s/|/ /g")
+ EXPECTED_ISOLCPUS=$2
+ EXPECTED_SDOMAIN=$1
else
- EXPECT_VAL2=$EXPECT_VAL
+ EXPECTED_SDOMAIN=$EXPECTED_ISOLCPUS
fi
#
# to make appending those CPUs easier.
#
[[ -n "$BOOT_ISOLCPUS" ]] && {
- EXPECT_VAL=${EXPECT_VAL:+${EXPECT_VAL},}${BOOT_ISOLCPUS}
- EXPECT_VAL2=${EXPECT_VAL2:+${EXPECT_VAL2},}${BOOT_ISOLCPUS}
+ EXPECTED_ISOLCPUS=${EXPECTED_ISOLCPUS:+${EXPECTED_ISOLCPUS},}${BOOT_ISOLCPUS}
+ EXPECTED_SDOMAIN=${EXPECTED_SDOMAIN:+${EXPECTED_SDOMAIN},}${BOOT_ISOLCPUS}
}
#
# Check cpuset.cpus.isolated cpumask
#
- [[ "$EXPECT_VAL2" != "$ISOLCPUS" ]] && {
+ [[ "$EXPECTED_ISOLCPUS" != "$ISOLCPUS" ]] && {
# Take a 50ms pause and try again
pause 0.05
ISOLCPUS=$(cat $ISCPUS)
}
- [[ "$EXPECT_VAL2" != "$ISOLCPUS" ]] && return 1
+ [[ "$EXPECTED_ISOLCPUS" != "$ISOLCPUS" ]] && return 1
ISOLCPUS=
+ EXPECTED_ISOLCPUS=$EXPECTED_SDOMAIN
#
# Use the sched domain in debugfs to check isolated CPUs, if available
done
[[ "$ISOLCPUS" = *- ]] && ISOLCPUS=${ISOLCPUS}$LASTISOLCPU
- [[ "$EXPECT_VAL" = "$ISOLCPUS" ]]
+ [[ "$EXPECTED_SDOMAIN" = "$ISOLCPUS" ]]
}
test_fail()
exit 1
}
+#
+# Check state transition test result
+# $1 - Test number
+# $2 - Expected effective CPU values
+# $3 - Expected partition states
+# $4 - Expected isolated CPUs
+#
+check_test_results()
+{
+ _NR=$1
+ _ECPUS="$2"
+ _PSTATES="$3"
+ _ISOLCPUS="$4"
+
+ [[ -n "$_ECPUS" && "$_ECPUS" != . ]] && {
+ check_effective_cpus $_ECPUS
+ [[ $? -ne 0 ]] && test_fail $_NR "effective CPU" \
+ "Cgroup $CGRP: expected $EXPECTED_CPUS, got $ACTUAL_CPUS"
+ }
+
+ [[ -n "$_PSTATES" && "$_PSTATES" != . ]] && {
+ check_cgroup_states $_PSTATES
+ [[ $? -ne 0 ]] && test_fail $_NR states \
+ "Cgroup $CGRP: expected $EXPECTED_STATE, got $ACTUAL_STATE"
+ }
+
+ # Compare the expected isolated CPUs with the actual ones,
+ # if available
+ [[ -n "$_ISOLCPUS" ]] && {
+ check_isolcpus $_ISOLCPUS
+ [[ $? -ne 0 ]] && {
+ [[ -n "$BOOT_ISOLCPUS" ]] && _ISOLCPUS=${_ISOLCPUS},${BOOT_ISOLCPUS}
+ test_fail $_NR "isolated CPU" \
+ "Expect $_ISOLCPUS, get $ISOLCPUS instead"
+ }
+ }
+ reset_cgroup_states
+ #
+ # Check to see if effective cpu list changes
+ #
+ _NEWLIST=$(cat $CGROUP2/cpuset.cpus.effective)
+ RETRY=0
+ while [[ $_NEWLIST != $CPULIST && $RETRY -lt 8 ]]
+ do
+ # Wait a bit longer & recheck a few times
+ pause 0.02
+ ((RETRY++))
+ _NEWLIST=$(cat $CGROUP2/cpuset.cpus.effective)
+ done
+ [[ $_NEWLIST != $CPULIST ]] && {
+ echo "Effective cpus changed to $_NEWLIST after test $_NR!"
+ exit 1
+ }
+ null_isolcpus_check
+ [[ $VERBOSE -gt 0 ]] && echo "Test $I done."
+}
+
#
# Run cpuset state transition test
# $1 - test matrix name
{
TEST=$1
CONTROLLER=cpuset
+ CGROUP_LIST=". A1 A1/A2 A1/A2/A3 B1"
+ RESET_LIST="A1/A2/A3 A1/A2 A1 B1"
I=0
eval CNT="\${#$TEST[@]}"
[[ $RETVAL -ne $RESULT ]] && test_fail $I result
- [[ -n "$ECPUS" && "$ECPUS" != . ]] && {
- check_effective_cpus $ECPUS
- [[ $? -ne 0 ]] && test_fail $I "effective CPU"
- }
-
- [[ -n "$STATES" && "$STATES" != . ]] && {
- check_cgroup_states $STATES
- [[ $? -ne 0 ]] && test_fail $I states
- }
-
- # Compare the expected isolated CPUs with the actual ones,
- # if available
- [[ -n "$ICPUS" ]] && {
- check_isolcpus $ICPUS
- [[ $? -ne 0 ]] && {
- [[ -n "$BOOT_ISOLCPUS" ]] && ICPUS=${ICPUS},${BOOT_ISOLCPUS}
- test_fail $I "isolated CPU" \
- "Expect $ICPUS, get $ISOLCPUS instead"
- }
- }
- reset_cgroup_states
- #
- # Check to see if effective cpu list changes
- #
- NEWLIST=$(cat cpuset.cpus.effective)
- RETRY=0
- while [[ $NEWLIST != $CPULIST && $RETRY -lt 8 ]]
- do
- # Wait a bit longer & recheck a few times
- pause 0.02
- ((RETRY++))
- NEWLIST=$(cat cpuset.cpus.effective)
- done
- [[ $NEWLIST != $CPULIST ]] && {
- echo "Effective cpus changed to $NEWLIST after test $I!"
- exit 1
- }
- null_isolcpus_check
- [[ $VERBOSE -gt 0 ]] && echo "Test $I done."
+ check_test_results $I "$ECPUS" "$STATES" "$ICPUS"
((I++))
done
echo "All $I tests of $TEST PASSED."
echo $$ > $CGROUP2/cgroup.procs
[[ -d A1 ]] && rmdir A1
null_isolcpus_check
+ pause 0.05
}
#
else
echo "Inotify test PASSED"
fi
+ echo member > cpuset.cpus.partition
+ echo "" > cpuset.cpus
}
trap cleanup 0 2 3 6
projects / thirdparty / linux.git / commitdiff
