* Improve saveconfig output. HStenn.
* Decode restrict flags on receive() debug output. HStenn.
* Decode interface flags on receive() debug output. HStenn.
+* Warn the user if deprecated "driftfile name WanderThreshold" is used. HStenn.
+* Update the documentation in ntp.conf.def . HStenn.
---
(4.2.8p10) 2017/03/21 Released by Harlan Stenn <stenn@ntp.org>
#
# EDIT THIS FILE WITH CAUTION (invoke-ntp.conf.texi)
#
-# It has been AutoGen-ed January 8, 2018 at 12:00:34 AM by AutoGen 5.18.5
+# It has been AutoGen-ed January 21, 2018 at 03:03:16 AM by AutoGen 5.18.5
# From the definitions ntp.conf.def
# and the template file agtexi-file.tpl
@end ignore
@code{ntpd(1ntpdmdoc)}
on multiple hosts, with (mostly) common options (e.g., a
restriction list).
+@item @code{interface}
+@code{[@code{listen} | @code{ignore} | @code{drop}]}
+@code{[@code{all} | @code{ipv4} | @code{ipv6} | @code{wildcard} @kbd{name} | @kbd{address} @code{[@code{/} @kbd{prefixlen}]}
+The
+@code{interface}
+directive controls which network addresses
+@code{ntpd(1ntpdmdoc)}
+opens, and whether input is dropped without processing.
+The first parameter determines the aciton for addresses
+which match the second parameter.
+The second parameter specifies a class of addresses,
+or a specific interface name,
+or an address.
+In the address case,
+@kbd{prefixlen}
+determines how many bits must match for this rule to apply.
+@code{ignore}
+prevents opening matching addresses,
+@code{drop}
+causes
+@code{ntpd(1ntpdmdoc)}
+to open the address and drop all received packets without examination.
+Multiple
+@code{interface}
+directives can be used.
+The last rule which matches a particular address determines the action for it.
+@code{interface}
+directives are disabled if any
+@code{-I},
+@code{--interface},
+@code{-L},
+or
+@code{--novirtualips}
+command-line options are specified in the configuration file,
+all available network addresses are opened.
+The
+@code{nic}
+directive is an alias for
+@code{interface}.
+@item @code{leapfile} @kbd{leapfile}
+This command loads the IERS leapseconds file and initializes the
+leapsecond values for the next leapsecond event, leapfile expiration
+time, and TAI offset.
+The file can be obtained directly from the IERS at
+@code{https://hpiers.obspm.fr/iers/bul/bulc/ntp/leap-seconds.list}
+or
+@code{ftp://hpiers.obspm.fr/iers/bul/bulc/ntp/leap-seconds.list}.
+The
+@code{leapfile}
+is scanned when
+@code{ntpd(1ntpdmdoc)}
+processes the
+@code{leapfile} @code{directive} @code{or} @code{when}
+@code{ntpd} @code{detects} @code{that} @code{the}
+@kbd{leapfile}
+has changed.
+@code{ntpd}
+checks once a day to see if the
+@kbd{leapfile}
+has changed.
+The
+@code{update-leap(1update_leapmdoc)}
+script can be run to see if the
+@kbd{leapfile}
+should be updated.
@item @code{leapsmearinterval} @kbd{seconds}
This EXPERIMENTAL option is only available if
@code{ntpd(1ntpdmdoc)}
This is the same operation as the
@code{-l}
command line option.
+@item @code{mru}
+@code{[@code{maxdepth} @kbd{count} | @code{maxmem} @kbd{kilobytes} | @code{mindepth} @kbd{count} | @code{maxage} @kbd{seconds} | @code{initialloc} @kbd{count} | @code{initmem} @kbd{kilobytes} | @code{incalloc} @kbd{count} | @code{incmem} @kbd{kilobytes}]}
+Controls size limite of the monitoring facility's Most Recently Used
+(MRU) list
+of client addresses, which is also used by the
+rate control facility.
+@table @asis
+@item @code{maxdepth} @kbd{count}
+@item @code{maxmem} @kbd{kilobytes}
+Equivalent upper limits on the size of the MRU list, in terms of entries or kilobytes.
+The acutal limit will be up to
+@code{incalloc}
+entries or
+@code{incmem}
+kilobytes larger.
+As with all of the
+@code{mru}
+options offered in units of entries or kilobytes, if both
+@code{maxdepth}
+and
+@code{maxmem} @code{are} @code{used,} @code{the} @code{last} @code{one} @code{used} @code{controls.}
+The default is 1024 kilobytes.
+@item @code{mindepth} @kbd{count}
+Lower limit on the MRU list size.
+When the MRU list has fewer than
+@code{mindepth}
+entries, existing entries are never removed to make room for newer ones,
+regardless of their age.
+The default is 600 entries.
+@item @code{maxage} @kbd{seconds}
+Once the MRU list has
+@code{mindepth}
+entries and an additional client is to ba added to the list,
+if the oldest entry was updated more than
+@code{maxage}
+seconds ago, that entry is removed and its storage is reused.
+If the oldest entry was updated more recently the MRU list is grown,
+subject to
+@code{maxdepth} @code{/} @code{moxmem}.
+The default is 64 seconds.
+@item @code{initalloc} @kbd{count}
+@item @code{initmem} @kbd{kilobytes}
+Initial memory allocation at the time the monitoringfacility is first enabled,
+in terms of the number of entries or kilobytes.
+The default is 4 kilobytes.
+@item @code{incalloc} @kbd{count}
+@item @code{incmem} @kbd{kilobytes}
+Size of additional memory allocations when growing the MRU list, in entries or kilobytes.
+The default is 4 kilobytes.
+@end table
+@item @code{nonvolatile} @kbd{threshold}
+Specify the
+@kbd{threshold}
+delta in seconds before an hourly change to the
+@code{driftfile}
+(frequency file) will be written, with a default value of 1e-7 (0.1 PPM).
+The frequency file is inspected each hour.
+If the difference between the current frequency and the last value written
+exceeds the threshold, the file is written and the
+@code{threshold}
+becomes the new threshold value.
+If the threshold is not exceeeded, it is reduced by half.
+This is intended to reduce the number of file writes
+for embedded systems with nonvolatile memory.
+@item @code{phone} @kbd{dial} @kbd{...}
+This command is used in conjunction with
+the ACTS modem driver (type 18)
+or the JJY driver (type 40, mode 100 - 180).
+For the ACTS modem driver (type 18), the arguments consist of
+a maximum of 10 telephone numbers used to dial USNO, NIST, or European
+time service.
+For the JJY driver (type 40 mode 100 - 180), the argument is
+one telephone number used to dial the telephone JJY service.
+The Hayes command ATDT is normally prepended to the number.
+The number can contain other modem control codes as well.
+@item @code{reset}
+@code{[@code{allpeers}]}
+@code{[@code{auth}]}
+@code{[@code{ctl}]}
+@code{[@code{io}]}
+@code{[@code{mem}]}
+@code{[@code{sys}]}
+@code{[@code{timer}]}
+Reset one or more groups of counters maintained by
+@code{ntpd}
+and exposed by
+@code{ntpq}
+and
+@code{ntpdc}.
+@item @code{rlimit} @code{[@code{memlock} @kbd{Nmegabytes} | @code{stacksize} @kbd{N4kPages} @code{filenum} @kbd{Nfiledescriptors}]}
+@table @asis
+@item @code{memlock} @kbd{Nmegabytes}
+Specify the number of megabytes of memory that should be
+allocated and locked.
+Probably only available under Linux, this option may be useful
+when dropping root (the
+@code{-i}
+option).
+The default is 32 megabytes on non-Linux machines, and -1 under Linux.
+-1 means "do not lock the process into memory".
+0 means "lock whatever memory the process wants into memory".
+@item @code{stacksize} @kbd{N4kPages}
+Specifies the maximum size of the process stack on systems with the
+@code{mlockall()}
+function.
+Defaults to 50 4k pages (200 4k pages in OpenBSD).
+@item @code{filenum} @kbd{Nfiledescriptors}
+Specifies the maximum number of file descriptors ntpd may have open at once.
+Defaults to the system default.
+@end table
+@item @code{saveconfigdir} @kbd{directory_path}
+Specify the directory in which to write configuration snapshots
+requested with
+.Cm ntpq 's
+@code{saveconfig}
+command.
+If
+@code{saveconfigdir}
+does not appear in the configuration file,
+@code{saveconfig}
+requests are rejected by
+@code{ntpd}.
+@item @code{saveconfig} @kbd{filename}
+Write the current configuration, including any runtime
+modifications given with
+@code{:config}
+or
+@code{config-from-file}
+to the
+@code{ntpd}
+host's
+@kbd{filename}
+in the
+@code{saveconfigdir}.
+This command will be rejected unless the
+@code{saveconfigdir}
+directive appears in
+.Cm ntpd 's
+configuration file.
+@kbd{filename}
+can use
+@code{strftime(3)}
+format directives to substitute the current date and time,
+for example,
+@code{saveconfig\ ntp-%Y%m%d-%H%M%S.conf}.
+The filename used is stored in the system variable
+@code{savedconfig}.
+Authentication is required.
@item @code{setvar} @kbd{variable} @code{[@code{default}]}
This command adds an additional system variable.
These
the names of all peer variables and the
@code{clock_var_list}
holds the names of the reference clock variables.
+@item @code{sysinfo}
+Display operational summary.
+@item @code{sysstats}
+Show statistucs counters maintained in the protocol module.
@item @code{tinker} @code{[@code{allan} @kbd{allan} | @code{dispersion} @kbd{dispersion} | @code{freq} @kbd{freq} | @code{huffpuff} @kbd{huffpuff} | @code{panic} @kbd{panic} | @code{step} @kbd{step} | @code{stepback} @kbd{stepback} | @code{stepfwd} @kbd{stepfwd} | @code{stepout} @kbd{stepout}]}
This command can be used to alter several system variables in
very exceptional circumstances.
If set to zero, the stepout
pulses will not be suppressed.
@end table
-@item @code{rlimit} @code{[@code{memlock} @kbd{Nmegabytes} | @code{stacksize} @kbd{N4kPages} @code{filenum} @kbd{Nfiledescriptors}]}
-@table @asis
-@item @code{memlock} @kbd{Nmegabytes}
-Specify the number of megabytes of memory that should be
-allocated and locked.
-Probably only available under Linux, this option may be useful
-when dropping root (the
-@code{-i}
-option).
-The default is 32 megabytes on non-Linux machines, and -1 under Linux.
--1 means "do not lock the process into memory".
-0 means "lock whatever memory the process wants into memory".
-@item @code{stacksize} @kbd{N4kPages}
-Specifies the maximum size of the process stack on systems with the
-@code{mlockall()}
-function.
-Defaults to 50 4k pages (200 4k pages in OpenBSD).
-@item @code{filenum} @kbd{Nfiledescriptors}
-Specifies the maximum number of file descriptors ntpd may have open at once.
-Defaults to the system default.
-@end table
+@item @code{writevar} @kbd{assocID\ name} @kbd{=} @kbd{value} @kbd{[,...]}
+Write (create or update) the specified variables.
+If the
+@code{assocID}
+is zero, the variablea re from the
+system variables
+name space, otherwise they are from the
+peer variables
+name space.
+The
+@code{assocID}
+is required, as the same name can occur in both name spaces.
+
@item @code{trap} @kbd{host_address} @code{[@code{port} @kbd{port_number}]} @code{[@code{interface} @kbd{interface_address}]}
This command configures a trap receiver at the given host
address and port number for sending messages with the specified
message is sent through.
Note that on a multihomed host the
interface used may vary from time to time with routing changes.
+@item @code{ttl} @kbd{hop} @kbd{...}
+This command specifies a list of TTL values in increasing order.
+Up to 8 values can be specified.
+In
+manycast
+mode these values are used in-turn in an expanding-ring search.
+The default is eight multiples of 32 starting at 31.
The trap receiver will generally log event messages and other
information from the server in a log file.
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp.conf 5man "08 Jan 2018" "4.2.8p10" "File Formats"
+.TH ntp.conf 5man "21 Jan 2018" "4.2.8p10" "File Formats"
.\"
.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed January 8, 2018 at 12:00:37 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed January 21, 2018 at 03:03:19 AM by AutoGen 5.18.5
.\" From the definitions ntp.conf.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 8 2018
+.Dd January 21 2018
.Dt NTP_CONF 5mdoc File Formats
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp.mdoc)
.\"
-.\" It has been AutoGen-ed January 8, 2018 at 12:00:31 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed January 21, 2018 at 03:03:14 AM by AutoGen 5.18.5
.\" From the definitions ntp.conf.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
.Xr ntpd 1ntpdmdoc
on multiple hosts, with (mostly) common options (e.g., a
restriction list).
+.It Ic interface
+.Oo
+.Cm listen | Cm ignore | Cm drop
+.Oc
+.Oo
+.Cm all | Cm ipv4 | Cm ipv6 | Cm wildcard
+.Ar name | Ar address
+.Oo Cm / Ar prefixlen
+.Oc
+.Oc
+The
+.Cm interface
+directive controls which network addresses
+.Xr ntpd 1ntpdmdoc
+opens, and whether input is dropped without processing.
+The first parameter determines the aciton for addresses
+which match the second parameter.
+The second parameter specifies a class of addresses,
+or a specific interface name,
+or an address.
+In the address case,
+.Ar prefixlen
+determines how many bits must match for this rule to apply.
+.Cm ignore
+prevents opening matching addresses,
+.Cm drop
+causes
+.Xr ntpd 1ntpdmdoc
+to open the address and drop all received packets without examination.
+Multiple
+.Cm interface
+directives can be used.
+The last rule which matches a particular address determines the action for it.
+.Cm interface
+directives are disabled if any
+.Fl I ,
+.Fl -interface ,
+.Fl L ,
+or
+.Fl -novirtualips
+command-line options are specified in the configuration file,
+all available network addresses are opened.
+The
+.Cm nic
+directive is an alias for
+.Cm interface .
+.It Ic leapfile Ar leapfile
+This command loads the IERS leapseconds file and initializes the
+leapsecond values for the next leapsecond event, leapfile expiration
+time, and TAI offset.
+The file can be obtained directly from the IERS at
+.Li https://hpiers.obspm.fr/iers/bul/bulc/ntp/leap-seconds.list
+or
+.Li ftp://hpiers.obspm.fr/iers/bul/bulc/ntp/leap-seconds.list .
+The
+.Cm leapfile
+is scanned when
+.Xr ntpd 1ntpdmdoc
+processes the
+.Cm leapfile directive or when
+.Cm ntpd detects that the
+.Ar leapfile
+has changed.
+.Cm ntpd
+checks once a day to see if the
+.Ar leapfile
+has changed.
+The
+.Xr update-leap 1update_leapmdoc
+script can be run to see if the
+.Ar leapfile
+should be updated.
.It Ic leapsmearinterval Ar seconds
This EXPERIMENTAL option is only available if
.Xr ntpd 1ntpdmdoc
This is the same operation as the
.Fl l
command line option.
+.It Ic mru
+.Oo
+.Cm maxdepth Ar count | Cm maxmem Ar kilobytes |
+.Cm mindepth Ar count | Cm maxage Ar seconds |
+.Cm initialloc Ar count | Cm initmem Ar kilobytes |
+.Cm incalloc Ar count | Cm incmem Ar kilobytes
+.Oc
+Controls size limite of the monitoring facility's Most Recently Used
+(MRU) list
+of client addresses, which is also used by the
+rate control facility.
+.Bl -tag -width indent
+.It Ic maxdepth Ar count
+.It Ic maxmem Ar kilobytes
+Equivalent upper limits on the size of the MRU list, in terms of entries or kilobytes.
+The acutal limit will be up to
+.Cm incalloc
+entries or
+.Cm incmem
+kilobytes larger.
+As with all of the
+.Cm mru
+options offered in units of entries or kilobytes, if both
+.Cm maxdepth
+and
+.Cm maxmem are used, the last one used controls.
+The default is 1024 kilobytes.
+.It Cm mindepth Ar count
+Lower limit on the MRU list size.
+When the MRU list has fewer than
+.Cm mindepth
+entries, existing entries are never removed to make room for newer ones,
+regardless of their age.
+The default is 600 entries.
+.It Cm maxage Ar seconds
+Once the MRU list has
+.Cm mindepth
+entries and an additional client is to ba added to the list,
+if the oldest entry was updated more than
+.Cm maxage
+seconds ago, that entry is removed and its storage is reused.
+If the oldest entry was updated more recently the MRU list is grown,
+subject to
+.Cm maxdepth / moxmem .
+The default is 64 seconds.
+.It Cm initalloc Ar count
+.It Cm initmem Ar kilobytes
+Initial memory allocation at the time the monitoringfacility is first enabled,
+in terms of the number of entries or kilobytes.
+The default is 4 kilobytes.
+.It Cm incalloc Ar count
+.It Cm incmem Ar kilobytes
+Size of additional memory allocations when growing the MRU list, in entries or kilobytes.
+The default is 4 kilobytes.
+.El
+.It Ic nonvolatile Ar threshold
+Specify the
+.Ar threshold
+delta in seconds before an hourly change to the
+.Cm driftfile
+(frequency file) will be written, with a default value of 1e-7 (0.1 PPM).
+The frequency file is inspected each hour.
+If the difference between the current frequency and the last value written
+exceeds the threshold, the file is written and the
+.Cm threshold
+becomes the new threshold value.
+If the threshold is not exceeeded, it is reduced by half.
+This is intended to reduce the number of file writes
+for embedded systems with nonvolatile memory.
+.It Ic phone Ar dial ...
+This command is used in conjunction with
+the ACTS modem driver (type 18)
+or the JJY driver (type 40, mode 100 - 180).
+For the ACTS modem driver (type 18), the arguments consist of
+a maximum of 10 telephone numbers used to dial USNO, NIST, or European
+time service.
+For the JJY driver (type 40 mode 100 - 180), the argument is
+one telephone number used to dial the telephone JJY service.
+The Hayes command ATDT is normally prepended to the number.
+The number can contain other modem control codes as well.
+.It Ic reset
+.Oo
+.Ic allpeers
+.Oc
+.Oo
+.Ic auth
+.Oc
+.Oo
+.Ic ctl
+.Oc
+.Oo
+.Ic io
+.Oc
+.Oo
+.Ic mem
+.Oc
+.Oo
+.Ic sys
+.Oc
+.Oo
+.Ic timer
+.Oc
+Reset one or more groups of counters maintained by
+.Cm ntpd
+and exposed by
+.Cm ntpq
+and
+.Cm ntpdc .
+.It Xo Ic rlimit
+.Oo
+.Cm memlock Ar Nmegabytes |
+.Cm stacksize Ar N4kPages
+.Cm filenum Ar Nfiledescriptors
+.Oc
+.Xc
+.Bl -tag -width indent
+.It Cm memlock Ar Nmegabytes
+Specify the number of megabytes of memory that should be
+allocated and locked.
+Probably only available under Linux, this option may be useful
+when dropping root (the
+.Fl i
+option).
+The default is 32 megabytes on non-Linux machines, and -1 under Linux.
+-1 means "do not lock the process into memory".
+0 means "lock whatever memory the process wants into memory".
+.It Cm stacksize Ar N4kPages
+Specifies the maximum size of the process stack on systems with the
+.Fn mlockall
+function.
+Defaults to 50 4k pages (200 4k pages in OpenBSD).
+.It Cm filenum Ar Nfiledescriptors
+Specifies the maximum number of file descriptors ntpd may have open at once.
+Defaults to the system default.
+.El
+.It Ic saveconfigdir Ar directory_path
+Specify the directory in which to write configuration snapshots
+requested with
+.Cm ntpq 's
+.Cm saveconfig
+command.
+If
+.Cm saveconfigdir
+does not appear in the configuration file,
+.Cm saveconfig
+requests are rejected by
+.Cm ntpd .
+.It Ic saveconfig Ar filename
+Write the current configuration, including any runtime
+modifications given with
+.Cm :config
+or
+.Cm config-from-file
+to the
+.Cm ntpd
+host's
+.Ar filename
+in the
+.Cm saveconfigdir .
+This command will be rejected unless the
+.Cm saveconfigdir
+directive appears in
+.Cm ntpd 's
+configuration file.
+.Ar filename
+can use
+.Xr strftime 3
+format directives to substitute the current date and time,
+for example,
+.Cm saveconfig\ ntp-%Y%m%d-%H%M%S.conf .
+The filename used is stored in the system variable
+.Cm savedconfig .
+Authentication is required.
.It Ic setvar Ar variable Op Cm default
This command adds an additional system variable.
These
the names of all peer variables and the
.Va clock_var_list
holds the names of the reference clock variables.
+.It Cm sysinfo
+Display operational summary.
+.It Cm sysstats
+Show statistucs counters maintained in the protocol module.
.It Xo Ic tinker
.Oo
.Cm allan Ar allan |
If set to zero, the stepout
pulses will not be suppressed.
.El
-.It Xo Ic rlimit
-.Oo
-.Cm memlock Ar Nmegabytes |
-.Cm stacksize Ar N4kPages
-.Cm filenum Ar Nfiledescriptors
-.Oc
-.Xc
-.Bl -tag -width indent
-.It Cm memlock Ar Nmegabytes
-Specify the number of megabytes of memory that should be
-allocated and locked.
-Probably only available under Linux, this option may be useful
-when dropping root (the
-.Fl i
-option).
-The default is 32 megabytes on non-Linux machines, and -1 under Linux.
--1 means "do not lock the process into memory".
-0 means "lock whatever memory the process wants into memory".
-.It Cm stacksize Ar N4kPages
-Specifies the maximum size of the process stack on systems with the
-.Fn mlockall
-function.
-Defaults to 50 4k pages (200 4k pages in OpenBSD).
-.It Cm filenum Ar Nfiledescriptors
-Specifies the maximum number of file descriptors ntpd may have open at once.
-Defaults to the system default.
-.El
+.It Cm writevar Ar assocID\ name = value [,...]
+Write (create or update) the specified variables.
+If the
+.Cm assocID
+is zero, the variablea re from the
+system variables
+name space, otherwise they are from the
+peer variables
+name space.
+The
+.Cm assocID
+is required, as the same name can occur in both name spaces.
.It Xo Ic trap Ar host_address
.Op Cm port Ar port_number
.Op Cm interface Ar interface_address
message is sent through.
Note that on a multihomed host the
interface used may vary from time to time with routing changes.
+.It Cm ttl Ar hop ...
+This command specifies a list of TTL values in increasing order.
+Up to 8 values can be specified.
+In
+.Cm
+manycast
+mode these values are used in-turn in an expanding-ring search.
+The default is eight multiples of 32 starting at 31.
.Pp
The trap receiver will generally log event messages and other
information from the server in a log file.
.ds B-Font B
.ds I-Font I
.ds R-Font R
-.TH ntp.conf 5 "08 Jan 2018" "4.2.8p10" "File Formats"
+.TH ntp.conf 5 "21 Jan 2018" "4.2.8p10" "File Formats"
.\"
.\" EDIT THIS FILE WITH CAUTION (in-mem file)
.\"
-.\" It has been AutoGen-ed January 8, 2018 at 12:00:37 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed January 21, 2018 at 03:03:19 AM by AutoGen 5.18.5
.\" From the definitions ntp.conf.def
.\" and the template file agman-cmd.tpl
.SH NAME
-.Dd January 8 2018
+.Dd January 21 2018
.Dt NTP_CONF 5 File Formats
.Os
.\" EDIT THIS FILE WITH CAUTION (ntp.mdoc)
.\"
-.\" It has been AutoGen-ed January 8, 2018 at 12:00:31 AM by AutoGen 5.18.5
+.\" It has been AutoGen-ed January 21, 2018 at 03:03:14 AM by AutoGen 5.18.5
.\" From the definitions ntp.conf.def
.\" and the template file agmdoc-cmd.tpl
.Sh NAME
1161, 1162, 1163, 1164, 1165, 1166, 1167, 1176, 1177, 1178,
1185, 1192, 1199, 1215, 1234, 1236, 1238, 1240, 1242, 1244,
1251, 1256, 1257, 1258, 1262, 1266, 1275, 1276, 1280, 1281,
- 1282, 1286, 1297, 1311, 1323, 1328, 1330, 1335, 1336, 1344,
- 1346, 1354, 1359, 1367, 1392, 1399, 1409, 1410, 1414, 1415,
- 1416, 1417, 1421, 1422, 1423, 1427, 1432, 1437, 1445, 1446,
- 1447, 1448, 1449, 1450, 1451, 1461, 1466, 1474, 1479, 1487,
- 1489, 1493, 1498, 1503, 1511, 1516, 1524, 1533, 1534, 1538,
- 1539, 1543, 1551, 1569, 1573, 1578, 1586, 1591, 1592, 1596,
- 1601, 1609, 1614, 1619, 1624, 1629, 1637, 1642, 1647, 1655,
- 1660, 1661, 1662, 1663, 1664
+ 1282, 1286, 1297, 1315, 1327, 1332, 1334, 1339, 1340, 1348,
+ 1350, 1358, 1363, 1371, 1396, 1403, 1413, 1414, 1418, 1419,
+ 1420, 1421, 1425, 1426, 1427, 1431, 1436, 1441, 1449, 1450,
+ 1451, 1452, 1453, 1454, 1455, 1465, 1470, 1478, 1483, 1491,
+ 1493, 1497, 1502, 1507, 1515, 1520, 1528, 1537, 1538, 1542,
+ 1543, 1547, 1555, 1573, 1577, 1582, 1590, 1595, 1596, 1600,
+ 1605, 1613, 1618, 1623, 1628, 1633, 1641, 1646, 1651, 1659,
+ 1664, 1665, 1666, 1667, 1668
};
#endif
APPEND_G_FIFO(cfgt.vars, av);
av = create_attr_dval(T_WanderThreshold, (yyvsp[0].Double));
APPEND_G_FIFO(cfgt.vars, av);
+ msyslog(LOG_WARNING,
+ "'driftfile FILENAME WanderValue' is deprecated, "
+ "please use separate 'driftfile FILENAME' and "
+ "'nonvolatile WanderValue' lines instead.");
} else {
YYFREE((yyvsp[-1].String));
yyerror("driftfile remote configuration ignored");
}
}
-#line 3057 "ntp_parser.c" /* yacc.c:1646 */
+#line 3061 "ntp_parser.c" /* yacc.c:1646 */
break;
case 253:
-#line 1311 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1315 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
if (lex_from_file()) {
attr_val *av;
yyerror("driftfile remote configuration ignored");
}
}
-#line 3071 "ntp_parser.c" /* yacc.c:1646 */
+#line 3075 "ntp_parser.c" /* yacc.c:1646 */
break;
case 254:
-#line 1324 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1328 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Set_var) = create_setvar_node((yyvsp[-3].String), (yyvsp[-1].String), (yyvsp[0].Integer)); }
-#line 3077 "ntp_parser.c" /* yacc.c:1646 */
+#line 3081 "ntp_parser.c" /* yacc.c:1646 */
break;
case 256:
-#line 1330 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1334 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Integer) = 0; }
-#line 3083 "ntp_parser.c" /* yacc.c:1646 */
+#line 3087 "ntp_parser.c" /* yacc.c:1646 */
break;
case 257:
-#line 1335 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1339 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Attr_val_fifo) = NULL; }
-#line 3089 "ntp_parser.c" /* yacc.c:1646 */
+#line 3093 "ntp_parser.c" /* yacc.c:1646 */
break;
case 258:
-#line 1337 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1341 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Attr_val_fifo) = (yyvsp[-1].Attr_val_fifo);
APPEND_G_FIFO((yyval.Attr_val_fifo), (yyvsp[0].Attr_val));
}
-#line 3098 "ntp_parser.c" /* yacc.c:1646 */
+#line 3102 "ntp_parser.c" /* yacc.c:1646 */
break;
case 259:
-#line 1345 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1349 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Attr_val) = create_attr_ival((yyvsp[-1].Integer), (yyvsp[0].Integer)); }
-#line 3104 "ntp_parser.c" /* yacc.c:1646 */
+#line 3108 "ntp_parser.c" /* yacc.c:1646 */
break;
case 260:
-#line 1347 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1351 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Attr_val) = create_attr_sval((yyvsp[-1].Integer), estrdup((yyvsp[0].Address_node)->address));
destroy_address_node((yyvsp[0].Address_node));
}
-#line 3113 "ntp_parser.c" /* yacc.c:1646 */
+#line 3117 "ntp_parser.c" /* yacc.c:1646 */
break;
case 261:
-#line 1355 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1359 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Attr_val_fifo) = (yyvsp[-1].Attr_val_fifo);
APPEND_G_FIFO((yyval.Attr_val_fifo), (yyvsp[0].Attr_val));
}
-#line 3122 "ntp_parser.c" /* yacc.c:1646 */
+#line 3126 "ntp_parser.c" /* yacc.c:1646 */
break;
case 262:
-#line 1360 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1364 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Attr_val_fifo) = NULL;
APPEND_G_FIFO((yyval.Attr_val_fifo), (yyvsp[0].Attr_val));
}
-#line 3131 "ntp_parser.c" /* yacc.c:1646 */
+#line 3135 "ntp_parser.c" /* yacc.c:1646 */
break;
case 263:
-#line 1368 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1372 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
char prefix;
char * type;
(yyval.Attr_val) = create_attr_sval(prefix, estrdup(type));
YYFREE((yyvsp[0].String));
}
-#line 3157 "ntp_parser.c" /* yacc.c:1646 */
+#line 3161 "ntp_parser.c" /* yacc.c:1646 */
break;
case 264:
-#line 1393 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1397 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
nic_rule_node *nrn;
nrn = create_nic_rule_node((yyvsp[0].Integer), NULL, (yyvsp[-1].Integer));
APPEND_G_FIFO(cfgt.nic_rules, nrn);
}
-#line 3168 "ntp_parser.c" /* yacc.c:1646 */
+#line 3172 "ntp_parser.c" /* yacc.c:1646 */
break;
case 265:
-#line 1400 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1404 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
nic_rule_node *nrn;
nrn = create_nic_rule_node(0, (yyvsp[0].String), (yyvsp[-1].Integer));
APPEND_G_FIFO(cfgt.nic_rules, nrn);
}
-#line 3179 "ntp_parser.c" /* yacc.c:1646 */
+#line 3183 "ntp_parser.c" /* yacc.c:1646 */
break;
case 275:
-#line 1428 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1432 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ CONCAT_G_FIFOS(cfgt.reset_counters, (yyvsp[0].Int_fifo)); }
-#line 3185 "ntp_parser.c" /* yacc.c:1646 */
+#line 3189 "ntp_parser.c" /* yacc.c:1646 */
break;
case 276:
-#line 1433 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1437 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Int_fifo) = (yyvsp[-1].Int_fifo);
APPEND_G_FIFO((yyval.Int_fifo), create_int_node((yyvsp[0].Integer)));
}
-#line 3194 "ntp_parser.c" /* yacc.c:1646 */
+#line 3198 "ntp_parser.c" /* yacc.c:1646 */
break;
case 277:
-#line 1438 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1442 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Int_fifo) = NULL;
APPEND_G_FIFO((yyval.Int_fifo), create_int_node((yyvsp[0].Integer)));
}
-#line 3203 "ntp_parser.c" /* yacc.c:1646 */
+#line 3207 "ntp_parser.c" /* yacc.c:1646 */
break;
case 285:
-#line 1462 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1466 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Attr_val_fifo) = (yyvsp[-1].Attr_val_fifo);
APPEND_G_FIFO((yyval.Attr_val_fifo), create_int_node((yyvsp[0].Integer)));
}
-#line 3212 "ntp_parser.c" /* yacc.c:1646 */
+#line 3216 "ntp_parser.c" /* yacc.c:1646 */
break;
case 286:
-#line 1467 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1471 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Attr_val_fifo) = NULL;
APPEND_G_FIFO((yyval.Attr_val_fifo), create_int_node((yyvsp[0].Integer)));
}
-#line 3221 "ntp_parser.c" /* yacc.c:1646 */
+#line 3225 "ntp_parser.c" /* yacc.c:1646 */
break;
case 287:
-#line 1475 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1479 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Attr_val_fifo) = (yyvsp[-1].Attr_val_fifo);
APPEND_G_FIFO((yyval.Attr_val_fifo), (yyvsp[0].Attr_val));
}
-#line 3230 "ntp_parser.c" /* yacc.c:1646 */
+#line 3234 "ntp_parser.c" /* yacc.c:1646 */
break;
case 288:
-#line 1480 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1484 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Attr_val_fifo) = NULL;
APPEND_G_FIFO((yyval.Attr_val_fifo), (yyvsp[0].Attr_val));
}
-#line 3239 "ntp_parser.c" /* yacc.c:1646 */
+#line 3243 "ntp_parser.c" /* yacc.c:1646 */
break;
case 289:
-#line 1488 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1492 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Attr_val) = create_attr_ival('i', (yyvsp[0].Integer)); }
-#line 3245 "ntp_parser.c" /* yacc.c:1646 */
+#line 3249 "ntp_parser.c" /* yacc.c:1646 */
break;
case 291:
-#line 1494 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1498 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Attr_val) = create_attr_rangeval('-', (yyvsp[-3].Integer), (yyvsp[-1].Integer)); }
-#line 3251 "ntp_parser.c" /* yacc.c:1646 */
+#line 3255 "ntp_parser.c" /* yacc.c:1646 */
break;
case 292:
-#line 1499 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1503 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.String_fifo) = (yyvsp[-1].String_fifo);
APPEND_G_FIFO((yyval.String_fifo), create_string_node((yyvsp[0].String)));
}
-#line 3260 "ntp_parser.c" /* yacc.c:1646 */
+#line 3264 "ntp_parser.c" /* yacc.c:1646 */
break;
case 293:
-#line 1504 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1508 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.String_fifo) = NULL;
APPEND_G_FIFO((yyval.String_fifo), create_string_node((yyvsp[0].String)));
}
-#line 3269 "ntp_parser.c" /* yacc.c:1646 */
+#line 3273 "ntp_parser.c" /* yacc.c:1646 */
break;
case 294:
-#line 1512 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1516 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Address_fifo) = (yyvsp[-1].Address_fifo);
APPEND_G_FIFO((yyval.Address_fifo), (yyvsp[0].Address_node));
}
-#line 3278 "ntp_parser.c" /* yacc.c:1646 */
+#line 3282 "ntp_parser.c" /* yacc.c:1646 */
break;
case 295:
-#line 1517 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1521 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Address_fifo) = NULL;
APPEND_G_FIFO((yyval.Address_fifo), (yyvsp[0].Address_node));
}
-#line 3287 "ntp_parser.c" /* yacc.c:1646 */
+#line 3291 "ntp_parser.c" /* yacc.c:1646 */
break;
case 296:
-#line 1525 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1529 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
if ((yyvsp[0].Integer) != 0 && (yyvsp[0].Integer) != 1) {
yyerror("Integer value is not boolean (0 or 1). Assuming 1");
(yyval.Integer) = (yyvsp[0].Integer);
}
}
-#line 3300 "ntp_parser.c" /* yacc.c:1646 */
+#line 3304 "ntp_parser.c" /* yacc.c:1646 */
break;
case 297:
-#line 1533 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1537 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Integer) = 1; }
-#line 3306 "ntp_parser.c" /* yacc.c:1646 */
+#line 3310 "ntp_parser.c" /* yacc.c:1646 */
break;
case 298:
-#line 1534 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1538 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Integer) = 0; }
-#line 3312 "ntp_parser.c" /* yacc.c:1646 */
+#line 3316 "ntp_parser.c" /* yacc.c:1646 */
break;
case 299:
-#line 1538 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1542 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Double) = (double)(yyvsp[0].Integer); }
-#line 3318 "ntp_parser.c" /* yacc.c:1646 */
+#line 3322 "ntp_parser.c" /* yacc.c:1646 */
break;
case 301:
-#line 1544 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1548 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Integer) = basedate_eval_string((yyvsp[0].String)); YYFREE((yyvsp[0].String)); }
-#line 3324 "ntp_parser.c" /* yacc.c:1646 */
+#line 3328 "ntp_parser.c" /* yacc.c:1646 */
break;
case 302:
-#line 1552 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1556 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
sim_node *sn;
/* Revert from ; to \n for end-of-command */
old_config_style = 1;
}
-#line 3338 "ntp_parser.c" /* yacc.c:1646 */
+#line 3342 "ntp_parser.c" /* yacc.c:1646 */
break;
case 303:
-#line 1569 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1573 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ old_config_style = 0; }
-#line 3344 "ntp_parser.c" /* yacc.c:1646 */
+#line 3348 "ntp_parser.c" /* yacc.c:1646 */
break;
case 304:
-#line 1574 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1578 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Attr_val_fifo) = (yyvsp[-2].Attr_val_fifo);
APPEND_G_FIFO((yyval.Attr_val_fifo), (yyvsp[-1].Attr_val));
}
-#line 3353 "ntp_parser.c" /* yacc.c:1646 */
+#line 3357 "ntp_parser.c" /* yacc.c:1646 */
break;
case 305:
-#line 1579 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1583 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Attr_val_fifo) = NULL;
APPEND_G_FIFO((yyval.Attr_val_fifo), (yyvsp[-1].Attr_val));
}
-#line 3362 "ntp_parser.c" /* yacc.c:1646 */
+#line 3366 "ntp_parser.c" /* yacc.c:1646 */
break;
case 306:
-#line 1587 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1591 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Attr_val) = create_attr_dval((yyvsp[-2].Integer), (yyvsp[0].Double)); }
-#line 3368 "ntp_parser.c" /* yacc.c:1646 */
+#line 3372 "ntp_parser.c" /* yacc.c:1646 */
break;
case 309:
-#line 1597 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1601 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Sim_server_fifo) = (yyvsp[-1].Sim_server_fifo);
APPEND_G_FIFO((yyval.Sim_server_fifo), (yyvsp[0].Sim_server));
}
-#line 3377 "ntp_parser.c" /* yacc.c:1646 */
+#line 3381 "ntp_parser.c" /* yacc.c:1646 */
break;
case 310:
-#line 1602 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1606 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Sim_server_fifo) = NULL;
APPEND_G_FIFO((yyval.Sim_server_fifo), (yyvsp[0].Sim_server));
}
-#line 3386 "ntp_parser.c" /* yacc.c:1646 */
+#line 3390 "ntp_parser.c" /* yacc.c:1646 */
break;
case 311:
-#line 1610 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1614 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Sim_server) = ONLY_SIM(create_sim_server((yyvsp[-4].Address_node), (yyvsp[-2].Double), (yyvsp[-1].Sim_script_fifo))); }
-#line 3392 "ntp_parser.c" /* yacc.c:1646 */
+#line 3396 "ntp_parser.c" /* yacc.c:1646 */
break;
case 312:
-#line 1615 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1619 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Double) = (yyvsp[-1].Double); }
-#line 3398 "ntp_parser.c" /* yacc.c:1646 */
+#line 3402 "ntp_parser.c" /* yacc.c:1646 */
break;
case 313:
-#line 1620 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1624 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Address_node) = (yyvsp[0].Address_node); }
-#line 3404 "ntp_parser.c" /* yacc.c:1646 */
+#line 3408 "ntp_parser.c" /* yacc.c:1646 */
break;
case 314:
-#line 1625 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1629 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Sim_script_fifo) = (yyvsp[-1].Sim_script_fifo);
APPEND_G_FIFO((yyval.Sim_script_fifo), (yyvsp[0].Sim_script));
}
-#line 3413 "ntp_parser.c" /* yacc.c:1646 */
+#line 3417 "ntp_parser.c" /* yacc.c:1646 */
break;
case 315:
-#line 1630 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1634 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Sim_script_fifo) = NULL;
APPEND_G_FIFO((yyval.Sim_script_fifo), (yyvsp[0].Sim_script));
}
-#line 3422 "ntp_parser.c" /* yacc.c:1646 */
+#line 3426 "ntp_parser.c" /* yacc.c:1646 */
break;
case 316:
-#line 1638 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1642 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Sim_script) = ONLY_SIM(create_sim_script_info((yyvsp[-3].Double), (yyvsp[-1].Attr_val_fifo))); }
-#line 3428 "ntp_parser.c" /* yacc.c:1646 */
+#line 3432 "ntp_parser.c" /* yacc.c:1646 */
break;
case 317:
-#line 1643 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1647 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Attr_val_fifo) = (yyvsp[-2].Attr_val_fifo);
APPEND_G_FIFO((yyval.Attr_val_fifo), (yyvsp[-1].Attr_val));
}
-#line 3437 "ntp_parser.c" /* yacc.c:1646 */
+#line 3441 "ntp_parser.c" /* yacc.c:1646 */
break;
case 318:
-#line 1648 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1652 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{
(yyval.Attr_val_fifo) = NULL;
APPEND_G_FIFO((yyval.Attr_val_fifo), (yyvsp[-1].Attr_val));
}
-#line 3446 "ntp_parser.c" /* yacc.c:1646 */
+#line 3450 "ntp_parser.c" /* yacc.c:1646 */
break;
case 319:
-#line 1656 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
+#line 1660 "../../ntpd/ntp_parser.y" /* yacc.c:1646 */
{ (yyval.Attr_val) = create_attr_dval((yyvsp[-2].Integer), (yyvsp[0].Double)); }
-#line 3452 "ntp_parser.c" /* yacc.c:1646 */
+#line 3456 "ntp_parser.c" /* yacc.c:1646 */
break;
-#line 3456 "ntp_parser.c" /* yacc.c:1646 */
+#line 3460 "ntp_parser.c" /* yacc.c:1646 */
default: break;
}
/* User semantic actions sometimes alter yychar, and that requires
#endif
return yyresult;
}
-#line 1667 "../../ntpd/ntp_parser.y" /* yacc.c:1906 */
+#line 1671 "../../ntpd/ntp_parser.y" /* yacc.c:1906 */
void
APPEND_G_FIFO(cfgt.vars, av);
av = create_attr_dval(T_WanderThreshold, $2);
APPEND_G_FIFO(cfgt.vars, av);
+ msyslog(LOG_WARNING,
+ "'driftfile FILENAME WanderValue' is deprecated, "
+ "please use separate 'driftfile FILENAME' and "
+ "'nonvolatile WanderValue' lines instead.");
} else {
YYFREE($1);
yyerror("driftfile remote configuration ignored");
projects / thirdparty / ntp.git / commitdiff
