* fixed MSCHAP UTF-8 to UCS-2 conversion for three-byte encoding;
this fixes password with include UTF-8 characters that use
three-byte encoding EAP methods that use NtPasswordHash
- * fixed couple of sequencies where radio work items could get stuck,
+ * fixed couple of sequences where radio work items could get stuck,
e.g., when rfkill blocking happens during scanning or when
scan-for-auth workaround is used
* P2P enhancements/fixes
* added 'dup_network <id_s> <id_d> <name>' command; this can be used to
clone the psk field without having toextract it from wpa_supplicant
* fixed GSM authentication on USIM
- * added support for usin epoll in eloop (CONFIG_ELOOP_EPOLL=y)
+ * added support for using epoll in eloop (CONFIG_ELOOP_EPOLL=y)
* fixed some concurrent virtual interface cases with dedicated P2P
management interface to not catch events from removed interface (this
could result in the management interface getting disabled)
workarounds.
- Add support for AuthorizedMACs attribute.
* TDLS:
- - Propogate TDLS related nl80211 capability flags from kernel and
+ - Propagate TDLS related nl80211 capability flags from kernel and
add them as driver capability flags. If the driver doesn't support
capabilities, assume TDLS is supported internally. When TDLS is
explicitly not supported, disable all user facing TDLS operations.
* added support for EAP-SIM pseudonyms and fast re-authentication
* added support for EAP-TLS/PEAP/TTLS fast re-authentication (TLS
session resumption)
- * added support for EAP-SIM with two challanges
+ * added support for EAP-SIM with two challenges
(phase1="sim_min_num_chal=3" can be used to require three challenges)
* added support for configuring DH/DSA parameters for an ephemeral DH
key exchange (EAP-TLS/PEAP/TTLS) using new configuration parameters
ctrl_interface_group can be used to select which group gets access to
the control interface;
wpa_cli: by default, try to connect to the first interface available
- in /var/run/wpa_supplicant; this path can be overriden with -p option
+ in /var/run/wpa_supplicant; this path can be overridden with -p option
and an interface can be selected with -i option (i.e., in most common
cases, wpa_cli does not need to get any arguments)
* added support for LEAP
You will need to make a configuration file, e.g.,
/etc/wpa_supplicant.conf, with network configuration for the networks
you are going to use. Configuration file section below includes
-explanation fo the configuration file format and includes various
+explanation of the configuration file format and includes various
examples. Once the configuration is ready, you can test whether the
configuration work by first running wpa_supplicant with following
command to start it on foreground with debugging enabled:
disconnect = disconnect and wait for reassociate command before connecting
scan = request new BSS scan
scan_results = get latest scan results
- get_capability <eap/pairwise/group/key_mgmt/proto/auth_alg> = get capabilies
+ get_capability <eap/pairwise/group/key_mgmt/proto/auth_alg> = get capabilities
terminate = terminate wpa_supplicant
quit = exit wpa_cli
# Parameters for controlling scanning
-# Homogenous ESS identifier
+# Homogeneous ESS identifier
# If this is set, scans will be used to request response only from BSSes
# belonging to the specified Homogeneous ESS. This is used only if interworking
# is enabled.
/**
* This is the binder RPC interface entry point to the wpa_supplicant core.
* This initializes the binder driver & BinderManager instance and then forwards
- * all the notifcations from the supplicant core to the BinderManager.
+ * all the notifications from the supplicant core to the BinderManager.
*/
struct wpas_binder_priv;
struct wpa_global;
* This variable control whether wpa_supplicant is allow to re-write
* its configuration with wpa_config_write(). If this is zero,
* configuration data is only changed in memory and the external data
- * is not overriden. If this is non-zero, wpa_supplicant will update
+ * is not overridden. If this is non-zero, wpa_supplicant will update
* the configuration data (e.g., a file) whenever configuration is
* changed. This update may replace the old configuration which can
* remove comments from it in case of a text file configuration.
char *cmd)
{
/*
- * We do not check mesh interface existance because PMKSA should be
+ * We do not check mesh interface existence because PMKSA should be
* stored before wpa_s->ifmsh creation to suppress commit message
* creation.
*/
* @sa: station addr (p2p i/f) of the peer
* @dialog_token: service discovery request dialog token
* @update_indic: service discovery request update indicator
- * @tlvs: service discovery request genrated byte array of tlvs
+ * @tlvs: service discovery request generated byte array of tlvs
* @tlvs_len: service discovery request tlvs length
*/
void wpas_dbus_signal_p2p_sd_request(struct wpa_supplicant *wpa_s,
* @wpa_s: %wpa_supplicant network interface data
* @sa: station addr (p2p i/f) of the peer
* @update_indic: service discovery request update indicator
- * @tlvs: service discovery request genrated byte array of tlvs
+ * @tlvs: service discovery request generated byte array of tlvs
* @tlvs_len: service discovery request tlvs length
*/
void wpas_dbus_signal_p2p_sd_response(struct wpa_supplicant *wpa_s,
* wpas_dbus_handler_save_config - Save configuration to configuration file
* @message: Pointer to incoming dbus message
* @wpa_s: wpa_supplicant structure for a network interface
- * Returns: NULL on Success, Otherwise errror message
+ * Returns: NULL on Success, Otherwise error message
*
* Handler function for "SaveConfig" method call of network interface.
*/
if [ "$CMD" = "P2P-CROSS-CONNECT-ENABLE" ]; then
GIFNAME=$3
UPLINK=$4
- # enable NAT/masquarade $GIFNAME -> $UPLINK
+ # enable NAT/masquerade $GIFNAME -> $UPLINK
iptables -P FORWARD DROP
iptables -t nat -A POSTROUTING -o $UPLINK -j MASQUERADE
iptables -A FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
if [ "$CMD" = "P2P-CROSS-CONNECT-DISABLE" ]; then
GIFNAME=$3
UPLINK=$4
- # disable NAT/masquarade $GIFNAME -> $UPLINK
+ # disable NAT/masquerade $GIFNAME -> $UPLINK
sysctl net.ipv4.ip_forward=0
iptables -t nat -D POSTROUTING -o $UPLINK -j MASQUERADE
iptables -D FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
if [ "$CMD" = "P2P-CROSS-CONNECT-ENABLE" ]; then
GIFNAME=$3
UPLINK=$4
- # enable NAT/masquarade $GIFNAME -> $UPLINK
+ # enable NAT/masquerade $GIFNAME -> $UPLINK
iptables -P FORWARD DROP
iptables -t nat -A POSTROUTING -o $UPLINK -j MASQUERADE
iptables -A FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
if [ "$CMD" = "P2P-CROSS-CONNECT-DISABLE" ]; then
GIFNAME=$3
UPLINK=$4
- # disable NAT/masquarade $GIFNAME -> $UPLINK
+ # disable NAT/masquerade $GIFNAME -> $UPLINK
sysctl net.ipv4.ip_forward=0
iptables -t nat -D POSTROUTING -o $UPLINK -j MASQUERADE
iptables -D FORWARD -i $UPLINK -o $GIFNAME -m state --state RELATED,ESTABLISHED -j ACCEPT
global wpas_dbus_interfaces_interface
global wpas_dbus_interfaces_p2pdevice
- # Dictionary of Arguements
+ # Dictionary of Arguments
global p2p_connect_arguements
# Constructor
signal_name="WpsFailed")
- #Constructing all the arguements needed to connect
+ #Constructing all the arguments needed to connect
def constructArguements(self):
- # Adding required arguements
+ # Adding required arguments
self.p2p_connect_arguements = {'wps_method':self.wps_method,
'peer':dbus.ObjectPath(self.path+'/Peers/'+self.addr)}
usage()
quit()
- # Go_intent is optional for all arguements
+ # Go_intent is optional for all arguments
if (self.go_intent != None):
self.p2p_connect_arguements.update(
{'go_intent':dbus.Int32(self.go_intent)})
usage()
quit()
- # If theres a switch, override default option
+ # If there's a switch, override default option
for key, value in options:
# Help
if (key == "-h"):
else:
assert False, "unhandled option"
- # Required Arguements check
+ # Required Arguments check
if (interface_name == None or wps_method == None or addr == None):
- print("Error:\n Required arguements not specified")
+ print("Error:\n Required arguments not specified")
usage()
quit()
addr,pin,wps_method,go_intent)
except:
- print("Error:\n Invalid Arguements")
+ print("Error:\n Invalid Arguments")
usage()
quit()
usage()
quit()
- # If theres a switch, override default option
+ # If there's a switch, override default option
for key, value in options:
# Help
if (key == "-h"):
usage()
quit()
- # If theres a switch, override default option
+ # If there's a switch, override default option
for key, value in options:
# Help
if (key == "-h"):
usage()
quit()
- # If theres a switch, override default option
+ # If there's a switch, override default option
for key, value in options:
# Help
if (key == "-h"):
print(" [-w <wpas_dbus_interface>]")
print("Options:")
print(" -i = interface name")
- print(" -p = persistant group = 0 (0=false, 1=true)")
+ print(" -p = persistent group = 0 (0=false, 1=true)")
print(" -f = frequency")
print(" -o = persistent group object path")
print(" -w = wpas dbus interface = fi.w1.wpa_supplicant1")
global wpas_dbus_interfaces_interface
global wpas_dbus_interfaces_p2pdevice
- # Arguements
+ # Arguments
global P2PDictionary
# Constructor
self.p2p_interface.GroupAdd(self.P2PDictionary)
except:
- print("Error:\n Could not preform group add")
+ print("Error:\n Could not perform group add")
usage()
os._exit(0)
usage()
quit()
- # If theres a switch, override default option
+ # If there's a switch, override default option
for key, value in options:
# Help
if (key == "-h"):
p2p_group_add_test = P2P_Group_Add(interface_name,wpas_dbus_interface,
persistent,frequency,persistent_group_object)
except:
- print("Error:\n Invalid Arguements")
+ print("Error:\n Invalid Arguments")
p2p_group_add_test.constructArguements()
p2p_group_add_test.start()
# Required Signals
def InvitationResult(invite_result):
- print("Inviation Result signal :")
+ print("Invitation Result signal :")
status = invite_result['status']
print("status = ", status)
if invite_result.has_key('BSSID'):
global wpas_dbus_interfaces_interface
global wpas_dbus_interfaces_p2pdevice
- # Arguements
+ # Arguments
global P2PDictionary
# Constructor
self.p2p_interface.Invite(self.P2PDictionary)
except:
- print("Error:\n Invalid Arguements")
+ print("Error:\n Invalid Arguments")
usage()
os._exit(0)
usage()
quit()
- # If theres a switch, override default option
+ # If there's a switch, override default option
for key, value in options:
# Help
if (key == "-h"):
P2P_Invite(interface_name,wpas_dbus_interface,
addr,persistent_group_object)
except:
- print("Error:\n Invalid Arguements")
+ print("Error:\n Invalid Arguments")
usage()
os._exit(1)
usage()
quit()
- # If theres a switch, override default option
+ # If there's a switch, override default option
for key, value in options:
# Help
if (key == "-h"):
usage()
quit()
- # If theres a switch, override default option
+ # If there's a switch, override default option
for key, value in options:
# Help
if (key == "-h"):
interface wlan2 #default: eth0
-# The maximim number of leases (includes addressesd reserved
-# by OFFER's, DECLINE's, and ARP conficts
+# The maximum number of leases (includes addressesd reserved
+# by OFFER's, DECLINE's, and ARP conflicts
#max_leases 254 #default: 254
# If a lease to be given is below this value, the full lease time is
# instead used (seconds).
-#min_lease 60 #defult: 60
+#min_lease 60 #default: 60
# The location of the leases file
-#lease_file /var/lib/misc/udhcpd.leases #defualt: /var/lib/misc/udhcpd.leases
+#lease_file /var/lib/misc/udhcpd.leases #default: /var/lib/misc/udhcpd.leases
# The location of the pid file
pidfile /var/run/udhcpd-wlan2.pid #default: /var/run/udhcpd.pid
#boot_file /var/nfs_root #default: (none)
-# The remainer of options are DHCP options and can be specifed with the
+# The remainder of options are DHCP options and can be specified with the
# keyword 'opt' or 'option'. If an option can take multiple items, such
# as the dns option, they can be listed on the same line, or multiple
# lines. The only option with a default is 'lease'.
(selected_cred == NULL ||
cred_prio_cmp(selected_home_cred, selected_cred) >= 0)) {
/* Prefer network operated by the Home SP */
- wpa_printf(MSG_DEBUG, "Interworking: Overrided selected with selected_home");
+ wpa_printf(MSG_DEBUG, "Interworking: Overrode selected with selected_home");
selected = selected_home;
selected_cred = selected_home_cred;
}
*pos++ = WLAN_EID_RRM_ENABLED_CAPABILITIES;
*pos++ = rrm_ie_len;
- /* Set supported capabilites flags */
+ /* Set supported capabilities flags */
if (wpa_s->drv_rrm_flags & WPA_DRIVER_FLAGS_TX_POWER_INSERTION)
*pos |= WLAN_RRM_CAPS_LINK_MEASUREMENT;
req_ac = up_to_ac[params->user_priority];
- /* Requested accesss category must have acm */
+ /* Requested access category must have acm */
if (!wpa_s->wmm_ac_assoc_info->ac_params[req_ac].acm) {
wpa_printf(MSG_DEBUG, "WMM AC: AC %d is not ACM", req_ac);
return 0;
#go_venue_group=7
#go_venue_type=1
-# Homogenous ESS identifier
+# Homogeneous ESS identifier
# If this is set, scans will be used to request response only from BSSes
# belonging to the specified Homogeneous ESS. This is used only if interworking
# is enabled.
projects / thirdparty / hostap.git / commitdiff
