phytec: adapt env to ampliphy-boot bootscripts for imx8 boards

Netboot script is named net_boot_fit.scr.uimg with ampliphy-boot.
fit_fdtconf is not longer needed. The default config is automatically
fetched from the fitImage. mmcroot is also not longer used, the
bootscript has a builtin default. bootenv_addr_r is no longer used, as
the bootenv is loaded into loadaddr.

Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>

diff --git a/board/phytec/imx8mp-libra-fpsc/imx8mp-libra-fpsc.env b/board/phytec/imx8mp-libra-fpsc/imx8mp-libra-fpsc.env
index c744248ab7a6189d2b6e425e4c20b36c83f7e956..5fe49e2a375b0907d1bbc04877d7e24903867ce4 100644 (file)
--- a/board/phytec/imx8mp-libra-fpsc/imx8mp-libra-fpsc.env
+++ b/board/phytec/imx8mp-libra-fpsc/imx8mp-libra-fpsc.env
@@ -1,14 +1,12 @@
-boot_script_dhcp=boot.scr.uimg
+boot_script_dhcp=net_boot_fit.scr.uimg
 console=ttymxc3,CONFIG_BAUDRATE
 emmc_dev=2  /* This is needed by built-in uuu flash scripts */
 fdtfile=CONFIG_DEFAULT_FDT_FILE
 fdt_addr_r=0x40480000
 fdt_overlay_addr_r=0x404a0000
-fit_fdtconf=conf-imx8mp-libra-rdk-fpsc.dtb
 kernel_addr_r=0x40a00000
 kernel_comp_addr_r=0x43a00000
 kernel_comp_size=0x1e00000
-mmcroot=2
 pxefile_addr_r=0x45800000
 ramdisk_addr_r=0x45802000
 scriptaddr=0x47600000

diff --git a/board/phytec/phycore_imx8mm/phycore_imx8mm.env b/board/phytec/phycore_imx8mm/phycore_imx8mm.env
index b3f0915432829219e0d6e0d89b1003d789988db4..1eb255878ba2ac2cc8f88d4e4e92d25e9f23db4c 100644 (file)
--- a/board/phytec/phycore_imx8mm/phycore_imx8mm.env
+++ b/board/phytec/phycore_imx8mm/phycore_imx8mm.env
@@ -1,3 +1,4 @@
+boot_script_dhcp=net_boot_fit.scr.uimg
 console=ttymxc2,CONFIG_BAUDRATE
 emmc_dev=2
 fdtfile=CONFIG_DEFAULT_FDT_FILE

diff --git a/board/phytec/phycore_imx8mp/phycore_imx8mp.env b/board/phytec/phycore_imx8mp/phycore_imx8mp.env
index 70044997adb8ad1e4a7c24faa52f9d78becb229e..8fa275e388cf88f258c45b95f508558c1e8abf1f 100644 (file)
--- a/board/phytec/phycore_imx8mp/phycore_imx8mp.env
+++ b/board/phytec/phycore_imx8mp/phycore_imx8mp.env
@@ -9,8 +9,7 @@ bootmeths=rauc script efi
 bootmeths=script efi
 #endif
 boot_targets=mmc2 mmc1 usb ethernet
-bootenv_addr_r=0x49100000
-boot_script_dhcp=boot.scr.uimg
+boot_script_dhcp=net_boot_fit.scr.uimg
 console=ttymxc0,115200
 dofastboot=0
 fastboot_raw_partition_all=0 4194304