could match a shorter one, because a length check was done
on the wrong string. Reported by Vladimir Vassiliev. File:
cleanup/cleanup_milter.c.
+
+20120214
+
+ Bugfix (introduced: Postfix 2.4): extraneous null assignment
+ caused core dump when postlog emitted the "usage" message.
+ Reported by Kant (fnord.hammer). File: postlog/postlog.c.
+
+20120401
+
+ Bitrot: shut up useless warnings about Cyrus SASL call-back
+ function pointer type mis-matches. Files: xsasl/xsasl_cyrus.h,
+ xsasl/xsasl_cyrus_server.c, xsasl/xsasl_client.c.
+
+20120422
+
+ Bit-rot: OpenSSL 1.0.1 introduces new protocols. Update the
+ known TLS protocol list so that protocols can be turned off
+ selectively to work around implementation bugs. Based on
+ a patch by Victor Duchovni. Files: proto/TLS_README.html,
+ proto/postconf.proto, tls/tls.h, tls/tls_misc.c, tls/tls_client.c,
+ tls/tls_server.c.
control over the minimum cipher grade for opportunistic TLS. With Postfix <
2.6, the minimum opportunistic TLS cipher grade is always "export".
-With mandatory TLS encryption, the Postfix SMTP server will by default only use
-SSLv3 or TLSv1. SSLv2 is only used when TLS encryption is optional. The
-mandatory TLS protocol list is specified via the smtpd_tls_mandatory_protocols
-configuration parameter. The corresponding smtpd_tls_protocols parameter
-(Postfix >= 2.6) controls the SSL/TLS protocols used with opportunistic TLS.
+With mandatory TLS encryption, the Postfix SMTP server will by default disable
+SSLv2. SSLv2 is used only when TLS encryption is optional. The mandatory TLS
+protocol list is specified via the smtpd_tls_mandatory_protocols configuration
+parameter. The corresponding smtpd_tls_protocols parameter (Postfix >= 2.6)
+controls the SSL/TLS protocols used with opportunistic TLS.
+
+Note that the OpenSSL library only supports protocol exclusion (not inclusion).
+For this reason, Postfix can exclude only protocols that are known at the time
+the Postfix software is written. If new protocols are added to the OpenSSL
+library, they cannot be excluded without corresponding changes to the Postfix
+source code.
For a server that is not a public Internet MX host, Postfix (>= 2.3) supports
configurations with no server certificates that use o\bon\bnl\bly\by the anonymous ciphers.
smtpd_tls_mandatory_ciphers = high
smtpd_tls_mandatory_exclude_ciphers = aNULL, MD5
smtpd_tls_security_level = encrypt
- smtpd_tls_mandatory_protocols = TLSv1
- # Also available with Postfix >= 2.5:
+ # Preferred form with Postfix >= 2.5:
smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3
+ # Alternative form.
+ smtpd_tls_mandatory_protocols = TLSv1
If you want to take advantage of ciphers with ephemeral Diffie-Hellman (EDH)
key exchange (this offers "forward-secrecy"), DH parameters are needed. Instead
Examples:
In the example below, traffic to example.com and its sub-domains via the
-corresponding MX hosts always uses TLS. The protocol version will be "SSLv3" or
-"TLSv1" (the default setting of smtp_tls_mandatory_protocols excludes "SSLv2").
-Only high or medium strength (i.e. 128 bit or better) ciphers will be used by
+corresponding MX hosts always uses TLS. The SSLv2 protocol will be disabled
+(the default setting of smtp_tls_mandatory_protocols excludes "SSLv2"). Only
+high- or medium-strength (i.e. 128 bit or better) ciphers will be used by
default for all "encrypt" security level sessions.
/etc/postfix/main.cf:
control over the minimum cipher grade for opportunistic TLS. With Postfix <
2.6, the minimum opportunistic TLS cipher grade is always "export".
-With mandatory TLS encryption, the Postfix SMTP client will by default only use
-SSLv3 or TLSv1. SSLv2 is only used when TLS encryption is optional. The
-mandatory TLS protocol list is specified via the smtp_tls_mandatory_protocols
-configuration parameter. The corresponding smtp_tls_protocols parameter
-(Postfix >= 2.6) controls the SSL/TLS protocols used with opportunistic TLS.
+With mandatory TLS encryption, the Postfix SMTP client will by default disable
+SSLv2. SSLv2 is used only when TLS encryption is optional. The mandatory TLS
+protocol list is specified via the smtp_tls_mandatory_protocols configuration
+parameter. The corresponding smtp_tls_protocols parameter (Postfix >= 2.6)
+controls the SSL/TLS protocols used with opportunistic TLS.
Example:
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers = RC4, MD5
smtp_tls_exclude_ciphers = aNULL
- smtp_tls_mandatory_protocols = SSLv3, TLSv1
- # Also available with Postfix >= 2.5:
+ # Preferred form with Postfix >= 2.5:
smtp_tls_mandatory_protocols = !SSLv2
+ # Alternative form.
+ smtp_tls_mandatory_protocols = SSLv3, TLSv1
# Also available with Postfix >= 2.6:
smtp_tls_ciphers = export
smtp_tls_protocols = !SSLv2
If you upgrade from Postfix 2.5 or earlier, read RELEASE_NOTES-2.6
before proceeding.
+Major changes with Postfix 2.7.9
+--------------------------------
+
+This release adds support to turn off the TLSv1.1 and TLSv1.2
+protocols. Introduced with OpenSSL version 1.0.1, these are known
+to cause inter-operability problems with for example hotmail.
+
+The radical workaround is to temporarily turn off problematic
+protocols globally:
+
+/etc/postfix/main.cf:
+ smtp_tls_protocols = !SSLv2, !TLSv1.1, !TLSv1.2
+ smtp_tls_mandatory_protocols = !SSLv2, !TLSv1.1, !TLSv1.2
+
+ smtpd_tls_protocols = !SSLv2, !TLSv1.1, !TLSv1.2
+ smtpd_tls_mandatory_protocols = !SSLv2, !TLSv1.1, !TLSv1.2
+
+However, it may be better to temporarily turn off problematic
+protocols for broken sites only:
+
+/etc/postfix/main.cf:
+ smtp_tls_policy_maps = hash:/etc/postfix/tls_policy
+
+/etc/postfix/tls_policy:
+ example.com may protocols=!SSLv2:!TLSv1.1:!TLSv1.2
+
+Important:
+
+- Note the use of ":" instead of comma or space. Also, note that
+ there is NO space around the "=" in "protocols=".
+
+- The smtp_tls_policy_maps lookup key must match the "next-hop"
+ destination that is given to the Postfix SMTP client. If you
+ override the next-hop destination with transport_maps, relayhost,
+ sender_dependent_relayhost_maps, or otherwise, you need to specify
+ the same destination for the smtp_tls_policy_maps lookup key.
+
Incompatibility with Postfix 2.7.2
----------------------------------
"export". </p>
<p> With mandatory TLS encryption, the Postfix SMTP server will by
-default only use SSLv3 or TLSv1. SSLv2 is only used when TLS encryption
+default disable SSLv2. SSLv2 is used only when TLS encryption
is optional. The mandatory TLS protocol list is specified via the
<a href="postconf.5.html#smtpd_tls_mandatory_protocols">smtpd_tls_mandatory_protocols</a> configuration parameter. The
corresponding <a href="postconf.5.html#smtpd_tls_protocols">smtpd_tls_protocols</a> parameter (Postfix ≥ 2.6)
controls the SSL/TLS protocols used with opportunistic TLS. </p>
+<p> Note that the OpenSSL library only supports protocol exclusion
+(not inclusion). For this reason, Postfix can exclude only protocols
+that are known at the time the Postfix software is written. If new
+protocols are added to the OpenSSL library, they cannot be excluded
+without corresponding changes to the Postfix source code. </p>
+
<p> For a server that is not a public Internet MX host, Postfix (≥ 2.3)
supports configurations with no <a href="#server_cert_key">server
certificates</a> that use <b>only</b> the anonymous ciphers. This is
<a href="postconf.5.html#smtpd_tls_mandatory_ciphers">smtpd_tls_mandatory_ciphers</a> = high
<a href="postconf.5.html#smtpd_tls_mandatory_exclude_ciphers">smtpd_tls_mandatory_exclude_ciphers</a> = aNULL, MD5
<a href="postconf.5.html#smtpd_tls_security_level">smtpd_tls_security_level</a> = encrypt
- <a href="postconf.5.html#smtpd_tls_mandatory_protocols">smtpd_tls_mandatory_protocols</a> = TLSv1
- # Also available with Postfix ≥ 2.5:
+ # Preferred form with Postfix ≥ 2.5:
<a href="postconf.5.html#smtpd_tls_mandatory_protocols">smtpd_tls_mandatory_protocols</a> = !SSLv2, !SSLv3
+ # Alternative form.
+ <a href="postconf.5.html#smtpd_tls_mandatory_protocols">smtpd_tls_mandatory_protocols</a> = TLSv1
</pre>
</blockquote>
<p> Examples: </p>
<p> In the example below, traffic to <i>example.com</i> and its sub-domains
-via the corresponding MX hosts always uses TLS. The protocol version will be
-
"SSLv3" or "TLSv1" (the default setting of <a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a>
-excludes "SSLv2"). Only high or medium strength (i.e. 128 bit or
+via the corresponding MX hosts always uses TLS. The SSLv2 protocol
+
will be disabled (the default setting of <a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a>
+excludes "SSLv2"). Only high- or medium-strength (i.e. 128 bit or
better) ciphers will be used by default for all "encrypt" security
level sessions. </p>
"export". </p>
<p> With mandatory TLS encryption, the Postfix SMTP client will by
-default only use SSLv3 or TLSv1. SSLv2 is only used when TLS encryption
+default disable SSLv2. SSLv2 is used only when TLS encryption
is optional. The mandatory TLS protocol list is specified via the
<a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a> configuration parameter. The corresponding
<a href="postconf.5.html#smtp_tls_protocols">smtp_tls_protocols</a> parameter (Postfix ≥ 2.6) controls
<a href="postconf.5.html#smtp_tls_mandatory_ciphers">smtp_tls_mandatory_ciphers</a> = medium
<a href="postconf.5.html#smtp_tls_mandatory_exclude_ciphers">smtp_tls_mandatory_exclude_ciphers</a> = RC4, MD5
<a href="postconf.5.html#smtp_tls_exclude_ciphers">smtp_tls_exclude_ciphers</a> = aNULL
- <a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a> = SSLv3, TLSv1
- # Also available with Postfix ≥ 2.5:
+ # Preferred form with Postfix ≥ 2.5:
<a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a> = !SSLv2
+ # Alternative form.
+ <a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a> = SSLv3, TLSv1
# Also available with Postfix ≥ 2.6:
<a href="postconf.5.html#smtp_tls_ciphers">smtp_tls_ciphers</a> = export
<a href="postconf.5.html#smtp_tls_protocols">smtp_tls_protocols</a> = !SSLv2
non-empty value is specified, this overrides the
obsolete <a href="postconf.5.html#smtp_tls_per_site">smtp_tls_per_site</a> parameter.
- <b><a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a> (SSLv3, TLSv1)</b>
+ <b><a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a> (!SSLv2)</b>
List of SSL/TLS protocols that the Postfix SMTP
client will use with mandatory TLS encryption.
</DD>
<DT><b><a name="lmtp_tls_mandatory_protocols">lmtp_tls_mandatory_protocols</a>
-(default: SSLv3, TLSv1)</b></DT><DD>
+(default: !SSLv2)</b></DT><DD>
<p> The LMTP-specific version of the <a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a>
configuration parameter. See there for details. </p>
</DD>
<DT><b><a name="smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a>
-(default: SSLv3, TLSv1)</b></DT><DD>
+(default: !SSLv2)</b></DT><DD>
<p> List of SSL/TLS protocols that the Postfix SMTP client will use with
mandatory TLS encryption. In <a href="postconf.5.html">main.cf</a> the values are separated by
empty value means allow all protocols. The valid protocol names, (see
<b>SSL_get_version(3)</b>), are "SSLv2", "SSLv3" and "TLSv1". </p>
+<p> Note: As of OpenSSL 1.0.1 two new protocols are defined, "TLSv1.1"
+and "TLSv1.2". If an older Postfix version is linked against OpenSSL
+1.0.1 or later, these, or any other new protocol versions, are
+unconditionally enabled. </p>
+
<p> With Postfix ≥ 2.5 the parameter syntax is expanded to support
protocol exclusions. One can now explicitly exclude SSLv2 by setting
"<a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a> = !SSLv2". To exclude both SSLv2 and
SSLv3 set "<a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a> = !SSLv2, !SSLv3". Listing
-the protocols to include, rather than protocols to exclude, is still
-supported; use the form you find more intuitive. </p>
+the protocols to include, rather than protocols to exclude, is
+supported, but not recommended. The exclusion form more closely
+matches the behaviour when the OpenSSL library is newer than Postfix.
+</p>
<p> Since SSL version 2 has known protocol weaknesses and is now
deprecated, the default setting excludes "SSLv2". This means that by
<p> Example: </p>
<pre>
-<a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a> = TLSv1
-# Alternative form with Postfix ≥ 2.5:
+# Preferred form with Postfix ≥ 2.5:
<a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a> = !SSLv2, !SSLv3
+# Alternative form.
+<a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a> = TLSv1
</pre>
<p> This feature is available in Postfix 2.3 and later. </p>
protocol names, (see <b>SSL_get_version(3)</b>), are "SSLv2", "SSLv3"
and "TLSv1". </p>
+<p> Note: As of OpenSSL 1.0.1 two new protocols are defined, "TLSv1.1"
+and "TLSv1.2". If an older Postfix version is linked against OpenSSL
+1.0.1 or later, these, or any other new protocol versions, are
+unconditionally enabled. </p>
+
<p> To include a protocol list its name, to exclude it, prefix the name
with a "!" character. To exclude SSLv2 even for opportunistic TLS set
"<a href="postconf.5.html#smtp_tls_protocols">smtp_tls_protocols</a> = !SSLv2". To exclude both "SSLv2" and "SSLv3" set
"<a href="postconf.5.html#smtp_tls_protocols">smtp_tls_protocols</a> = !SSLv2, !SSLv3". Explicitly listing the protocols to
-include, is supported, but not recommended. OpenSSL provides no mechanisms
-for excluding protocols not known at compile-time. If Postfix is linked
-against an OpenSSL library that supports additional protocol versions,
-they cannot be excluded using either syntax. </p>
+include, rather than protocols to exclude, is supported, but not
+recommended. The exclusion form more closely matches the behaviour
+when the OpenSSL library is newer than Postfix. </p>
<p> Example: </p>
<pre>
</DD>
<DT><b><a name="smtpd_tls_mandatory_protocols">smtpd_tls_mandatory_protocols</a>
-(default: SSLv3, TLSv1)</b></DT><DD>
+(default: !SSLv2)</b></DT><DD>
<p> The SSL/TLS protocols accepted by the Postfix SMTP server with
mandatory TLS encryption. If the list is empty, the server supports all
names separated by whitespace, commas or colons. The supported protocol
names are "SSLv2", "SSLv3" and "TLSv1", and are not case sensitive. </p>
+<p> Note: As of OpenSSL 1.0.1 two new protocols are defined, "TLSv1.1"
+and "TLSv1.2". If an older Postfix version is linked against OpenSSL
+1.0.1 or later, these, or any other new protocol versions, are
+unconditionally enabled. </p>
+
<p> With Postfix ≥ 2.5 the parameter syntax is expanded to support
protocol exclusions. One can now explicitly exclude SSLv2 by setting
"<a href="postconf.5.html#smtpd_tls_mandatory_protocols">smtpd_tls_mandatory_protocols</a> = !SSLv2". To exclude both SSLv2 and
SSLv3 set "<a href="postconf.5.html#smtpd_tls_mandatory_protocols">smtpd_tls_mandatory_protocols</a> = !SSLv2, !SSLv3". Listing
-the protocols to include, rather than protocols to exclude, is still
-supported, use the form you find more intuitive. </p>
+the protocols to include, rather than protocols to exclude, is
+supported, but not recommended. The exclusion form more closely
+matches the behaviour when the OpenSSL library is newer than Postfix.
+</p>
<p> Since SSL version 2 has known protocol weaknesses and is now
deprecated, the default setting excludes "SSLv2". This means that
"TLSv1". In <a href="postconf.5.html#smtp_tls_policy_maps">smtp_tls_policy_maps</a> table entries, "protocols" attribute
values are separated by a colon. </p>
+<p> Note: As of OpenSSL 1.0.1 two new protocols are defined, "TLSv1.1"
+and "TLSv1.2". If an older Postfix version is linked against OpenSSL
+1.0.1 or later, these, or any other new protocol versions, are
+unconditionally enabled. </p>
+
<p> To include a protocol list its name, to exclude it, prefix the name
with a "!" character. To exclude SSLv2 even for opportunistic TLS set
"<a href="postconf.5.html#smtpd_tls_protocols">smtpd_tls_protocols</a> = !SSLv2". To exclude both "SSLv2" and "SSLv3" set
"<a href="postconf.5.html#smtpd_tls_protocols">smtpd_tls_protocols</a> = !SSLv2, !SSLv3". Explicitly listing the protocols to
-include, is supported, but not recommended. OpenSSL provides no mechanisms
-for excluding protocols not known at compile-time. If Postfix is linked
-against an OpenSSL library that supports additional protocol versions,
-they cannot be excluded using either syntax. </p>
+include, rather than protocols to exclude, is supported, but not
+recommended. The exclusion form more closely matches the behaviour
+when the OpenSSL library is newer than Postfix. </p>
<p> Example: </p>
<pre>
non-empty value is specified, this overrides the
obsolete <a href="postconf.5.html#smtp_tls_per_site">smtp_tls_per_site</a> parameter.
- <b><a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a> (SSLv3, TLSv1)</b>
+ <b><a href="postconf.5.html#smtp_tls_mandatory_protocols">smtp_tls_mandatory_protocols</a> (!SSLv2)</b>
List of SSL/TLS protocols that the Postfix SMTP
client will use with mandatory TLS encryption.
exclude from the SMTP server cipher list at manda-
tory TLS security levels.
- <b><a href="postconf.5.html#smtpd_tls_mandatory_protocols">smtpd_tls_mandatory_protocols</a> (SSLv3, TLSv1)</b>
+ <b><a href="postconf.5.html#smtpd_tls_mandatory_protocols">smtpd_tls_mandatory_protocols</a> (!SSLv2)</b>
The SSL/TLS protocols accepted by the Postfix SMTP
server with mandatory TLS encryption.
configuration parameter. See there for details.
.PP
This feature is available in Postfix 2.3 and later.
-.SH lmtp_tls_mandatory_protocols (default: SSLv3, TLSv1)
+.SH lmtp_tls_mandatory_protocols (default: !SSLv2)
The LMTP-specific version of the smtp_tls_mandatory_protocols
configuration parameter. See there for details.
.PP
attribute. See smtp_tls_policy_maps for notes and examples.
.PP
This feature is available in Postfix 2.3 and later.
-.SH smtp_tls_mandatory_protocols (default: SSLv3, TLSv1)
+.SH smtp_tls_mandatory_protocols (default: !SSLv2)
List of SSL/TLS protocols that the Postfix SMTP client will use with
mandatory TLS encryption. In main.cf the values are separated by
whitespace, commas or colons. In the policy table "protocols" attribute
empty value means allow all protocols. The valid protocol names, (see
\\fBfBSSL_get_version\fR(3)\fR), are "SSLv2", "SSLv3" and "TLSv1".
.PP
+Note: As of OpenSSL 1.0.1 two new protocols are defined, "TLSv1.1"
+and "TLSv1.2". If an older Postfix version is linked against OpenSSL
+1.0.1 or later, these, or any other new protocol versions, are
+unconditionally enabled.
+.PP
With Postfix >= 2.5 the parameter syntax is expanded to support
protocol exclusions. One can now explicitly exclude SSLv2 by setting
"smtp_tls_mandatory_protocols = !SSLv2". To exclude both SSLv2 and
SSLv3 set "smtp_tls_mandatory_protocols = !SSLv2, !SSLv3". Listing
-the protocols to include, rather than protocols to exclude, is still
-supported; use the form you find more intuitive.
+the protocols to include, rather than protocols to exclude, is
+supported, but not recommended. The exclusion form more closely
+matches the behaviour when the OpenSSL library is newer than Postfix.
.PP
Since SSL version 2 has known protocol weaknesses and is now
deprecated, the default setting excludes "SSLv2". This means that by
.nf
.na
.ft C
-smtp_tls_mandatory_protocols = TLSv1
-# Alternative form with Postfix >= 2.5:
+# Preferred form with Postfix >= 2.5:
smtp_tls_mandatory_protocols = !SSLv2, !SSLv3
+# Alternative form.
+smtp_tls_mandatory_protocols = TLSv1
.fi
.ad
.ft R
protocol names, (see \\fBfBSSL_get_version\fR(3)\fR), are "SSLv2", "SSLv3"
and "TLSv1".
.PP
+Note: As of OpenSSL 1.0.1 two new protocols are defined, "TLSv1.1"
+and "TLSv1.2". If an older Postfix version is linked against OpenSSL
+1.0.1 or later, these, or any other new protocol versions, are
+unconditionally enabled.
+.PP
To include a protocol list its name, to exclude it, prefix the name
with a "!" character. To exclude SSLv2 even for opportunistic TLS set
"smtp_tls_protocols = !SSLv2". To exclude both "SSLv2" and "SSLv3" set
"smtp_tls_protocols = !SSLv2, !SSLv3". Explicitly listing the protocols to
-include, is supported, but not recommended. OpenSSL provides no mechanisms
-for excluding protocols not known at compile-time. If Postfix is linked
-against an OpenSSL library that supports additional protocol versions,
-they cannot be excluded using either syntax.
+include, rather than protocols to exclude, is supported, but not
+recommended. The exclusion form more closely matches the behaviour
+when the OpenSSL library is newer than Postfix.
.PP
Example:
.nf
(see there for syntax details).
.PP
This feature is available in Postfix 2.3 and later.
-.SH smtpd_tls_mandatory_protocols (default: SSLv3, TLSv1)
+.SH smtpd_tls_mandatory_protocols (default: !SSLv2)
The SSL/TLS protocols accepted by the Postfix SMTP server with
mandatory TLS encryption. If the list is empty, the server supports all
available SSL/TLS protocol versions. A non-empty value is a list
names separated by whitespace, commas or colons. The supported protocol
names are "SSLv2", "SSLv3" and "TLSv1", and are not case sensitive.
.PP
+Note: As of OpenSSL 1.0.1 two new protocols are defined, "TLSv1.1"
+and "TLSv1.2". If an older Postfix version is linked against OpenSSL
+1.0.1 or later, these, or any other new protocol versions, are
+unconditionally enabled.
+.PP
With Postfix >= 2.5 the parameter syntax is expanded to support
protocol exclusions. One can now explicitly exclude SSLv2 by setting
"smtpd_tls_mandatory_protocols = !SSLv2". To exclude both SSLv2 and
SSLv3 set "smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3". Listing
-the protocols to include, rather than protocols to exclude, is still
-supported, use the form you find more intuitive.
+the protocols to include, rather than protocols to exclude, is
+supported, but not recommended. The exclusion form more closely
+matches the behaviour when the OpenSSL library is newer than Postfix.
.PP
Since SSL version 2 has known protocol weaknesses and is now
deprecated, the default setting excludes "SSLv2". This means that
"TLSv1". In smtp_tls_policy_maps table entries, "protocols" attribute
values are separated by a colon.
.PP
+Note: As of OpenSSL 1.0.1 two new protocols are defined, "TLSv1.1"
+and "TLSv1.2". If an older Postfix version is linked against OpenSSL
+1.0.1 or later, these, or any other new protocol versions, are
+unconditionally enabled.
+.PP
To include a protocol list its name, to exclude it, prefix the name
with a "!" character. To exclude SSLv2 even for opportunistic TLS set
"smtpd_tls_protocols = !SSLv2". To exclude both "SSLv2" and "SSLv3" set
"smtpd_tls_protocols = !SSLv2, !SSLv3". Explicitly listing the protocols to
-include, is supported, but not recommended. OpenSSL provides no mechanisms
-for excluding protocols not known at compile-time. If Postfix is linked
-against an OpenSSL library that supports additional protocol versions,
-they cannot be excluded using either syntax.
+include, rather than protocols to exclude, is supported, but not
+recommended. The exclusion form more closely matches the behaviour
+when the OpenSSL library is newer than Postfix.
.PP
Example:
.nf
Optional lookup tables with the Postfix SMTP client TLS security
policy by next-hop destination; when a non-empty value is specified,
this overrides the obsolete smtp_tls_per_site parameter.
-.IP "\fBsmtp_tls_mandatory_protocols (SSLv3, TLSv1)\fR"
+.IP "\fBsmtp_tls_mandatory_protocols (!SSLv2)\fR"
List of SSL/TLS protocols that the Postfix SMTP client will use with
mandatory TLS encryption.
.IP "\fBsmtp_tls_scert_verifydepth (9)\fR"
.IP "\fBsmtpd_tls_mandatory_exclude_ciphers (empty)\fR"
Additional list of ciphers or cipher types to exclude from the
SMTP server cipher list at mandatory TLS security levels.
-.IP "\fBsmtpd_tls_mandatory_protocols (SSLv3, TLSv1)\fR"
+.IP "\fBsmtpd_tls_mandatory_protocols (!SSLv2)\fR"
The SSL/TLS protocols accepted by the Postfix SMTP server with
mandatory TLS encryption.
.IP "\fBsmtpd_tls_received_header (no)\fR"
"export". </p>
<p> With mandatory TLS encryption, the Postfix SMTP server will by
-default only use SSLv3 or TLSv1. SSLv2 is only used when TLS encryption
+default disable SSLv2. SSLv2 is used only when TLS encryption
is optional. The mandatory TLS protocol list is specified via the
smtpd_tls_mandatory_protocols configuration parameter. The
corresponding smtpd_tls_protocols parameter (Postfix ≥ 2.6)
controls the SSL/TLS protocols used with opportunistic TLS. </p>
+<p> Note that the OpenSSL library only supports protocol exclusion
+(not inclusion). For this reason, Postfix can exclude only protocols
+that are known at the time the Postfix software is written. If new
+protocols are added to the OpenSSL library, they cannot be excluded
+without corresponding changes to the Postfix source code. </p>
+
<p> For a server that is not a public Internet MX host, Postfix (≥ 2.3)
supports configurations with no <a href="#server_cert_key">server
certificates</a> that use <b>only</b> the anonymous ciphers. This is
smtpd_tls_mandatory_ciphers = high
smtpd_tls_mandatory_exclude_ciphers = aNULL, MD5
smtpd_tls_security_level = encrypt
- smtpd_tls_mandatory_protocols = TLSv1
- # Also available with Postfix ≥ 2.5:
+ # Preferred form with Postfix ≥ 2.5:
smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3
+ # Alternative form.
+ smtpd_tls_mandatory_protocols = TLSv1
</pre>
</blockquote>
<p> Examples: </p>
<p> In the example below, traffic to <i>example.com</i> and its sub-domains
-via the corresponding MX hosts always uses TLS. The protocol version will be
-"SSLv3" or "TLSv1" (the default setting of smtp_tls_mandatory_protocols
-excludes "SSLv2"). Only high or medium strength (i.e. 128 bit or
+via the corresponding MX hosts always uses TLS. The SSLv2 protocol
+will be disabled (the default setting of smtp_tls_mandatory_protocols
+excludes "SSLv2"). Only high- or medium-strength (i.e. 128 bit or
better) ciphers will be used by default for all "encrypt" security
level sessions. </p>
"export". </p>
<p> With mandatory TLS encryption, the Postfix SMTP client will by
-default only use SSLv3 or TLSv1. SSLv2 is only used when TLS encryption
+default disable SSLv2. SSLv2 is used only when TLS encryption
is optional. The mandatory TLS protocol list is specified via the
smtp_tls_mandatory_protocols configuration parameter. The corresponding
smtp_tls_protocols parameter (Postfix ≥ 2.6) controls
smtp_tls_mandatory_ciphers = medium
smtp_tls_mandatory_exclude_ciphers = RC4, MD5
smtp_tls_exclude_ciphers = aNULL
- smtp_tls_mandatory_protocols = SSLv3, TLSv1
- # Also available with Postfix ≥ 2.5:
+ # Preferred form with Postfix ≥ 2.5:
smtp_tls_mandatory_protocols = !SSLv2
+ # Alternative form.
+ smtp_tls_mandatory_protocols = SSLv3, TLSv1
# Also available with Postfix ≥ 2.6:
smtp_tls_ciphers = export
smtp_tls_protocols = !SSLv2
<p> This feature is available in Postfix 2.3 and later. </p>
-%PARAM smtp_tls_mandatory_protocols SSLv3, TLSv1
+%PARAM smtp_tls_mandatory_protocols !SSLv2
<p> List of SSL/TLS protocols that the Postfix SMTP client will use with
mandatory TLS encryption. In main.cf the values are separated by
empty value means allow all protocols. The valid protocol names, (see
<b>SSL_get_version(3)</b>), are "SSLv2", "SSLv3" and "TLSv1". </p>
+<p> Note: As of OpenSSL 1.0.1 two new protocols are defined, "TLSv1.1"
+and "TLSv1.2". If an older Postfix version is linked against OpenSSL
+1.0.1 or later, these, or any other new protocol versions, are
+unconditionally enabled. </p>
+
<p> With Postfix ≥ 2.5 the parameter syntax is expanded to support
protocol exclusions. One can now explicitly exclude SSLv2 by setting
"smtp_tls_mandatory_protocols = !SSLv2". To exclude both SSLv2 and
SSLv3 set "smtp_tls_mandatory_protocols = !SSLv2, !SSLv3". Listing
-the protocols to include, rather than protocols to exclude, is still
-supported; use the form you find more intuitive. </p>
+the protocols to include, rather than protocols to exclude, is
+supported, but not recommended. The exclusion form more closely
+matches the behaviour when the OpenSSL library is newer than Postfix.
+</p>
<p> Since SSL version 2 has known protocol weaknesses and is now
deprecated, the default setting excludes "SSLv2". This means that by
<p> Example: </p>
<pre>
-smtp_tls_mandatory_protocols = TLSv1
-# Alternative form with Postfix ≥ 2.5:
+# Preferred form with Postfix ≥ 2.5:
smtp_tls_mandatory_protocols = !SSLv2, !SSLv3
+# Alternative form.
+smtp_tls_mandatory_protocols = TLSv1
</pre>
<p> This feature is available in Postfix 2.3 and later. </p>
<p> This feature is available in Postfix 2.3 and later. </p>
-%PARAM lmtp_tls_mandatory_protocols SSLv3, TLSv1
+%PARAM lmtp_tls_mandatory_protocols !SSLv2
<p> The LMTP-specific version of the smtp_tls_mandatory_protocols
configuration parameter. See there for details. </p>
<p> This feature is available in Postfix 2.3 and later. </p>
-%PARAM smtpd_tls_mandatory_protocols SSLv3, TLSv1
+%PARAM smtpd_tls_mandatory_protocols !SSLv2
<p> The SSL/TLS protocols accepted by the Postfix SMTP server with
mandatory TLS encryption. If the list is empty, the server supports all
names separated by whitespace, commas or colons. The supported protocol
names are "SSLv2", "SSLv3" and "TLSv1", and are not case sensitive. </p>
+<p> Note: As of OpenSSL 1.0.1 two new protocols are defined, "TLSv1.1"
+and "TLSv1.2". If an older Postfix version is linked against OpenSSL
+1.0.1 or later, these, or any other new protocol versions, are
+unconditionally enabled. </p>
+
<p> With Postfix ≥ 2.5 the parameter syntax is expanded to support
protocol exclusions. One can now explicitly exclude SSLv2 by setting
"smtpd_tls_mandatory_protocols = !SSLv2". To exclude both SSLv2 and
SSLv3 set "smtpd_tls_mandatory_protocols = !SSLv2, !SSLv3". Listing
-the protocols to include, rather than protocols to exclude, is still
-supported, use the form you find more intuitive. </p>
+the protocols to include, rather than protocols to exclude, is
+supported, but not recommended. The exclusion form more closely
+matches the behaviour when the OpenSSL library is newer than Postfix.
+</p>
<p> Since SSL version 2 has known protocol weaknesses and is now
deprecated, the default setting excludes "SSLv2". This means that
protocol names, (see <b>SSL_get_version(3)</b>), are "SSLv2", "SSLv3"
and "TLSv1". </p>
+<p> Note: As of OpenSSL 1.0.1 two new protocols are defined, "TLSv1.1"
+and "TLSv1.2". If an older Postfix version is linked against OpenSSL
+1.0.1 or later, these, or any other new protocol versions, are
+unconditionally enabled. </p>
+
<p> To include a protocol list its name, to exclude it, prefix the name
with a "!" character. To exclude SSLv2 even for opportunistic TLS set
"smtp_tls_protocols = !SSLv2". To exclude both "SSLv2" and "SSLv3" set
"smtp_tls_protocols = !SSLv2, !SSLv3". Explicitly listing the protocols to
-include, is supported, but not recommended. OpenSSL provides no mechanisms
-for excluding protocols not known at compile-time. If Postfix is linked
-against an OpenSSL library that supports additional protocol versions,
-they cannot be excluded using either syntax. </p>
+include, rather than protocols to exclude, is supported, but not
+recommended. The exclusion form more closely matches the behaviour
+when the OpenSSL library is newer than Postfix. </p>
<p> Example: </p>
<pre>
"TLSv1". In smtp_tls_policy_maps table entries, "protocols" attribute
values are separated by a colon. </p>
+<p> Note: As of OpenSSL 1.0.1 two new protocols are defined, "TLSv1.1"
+and "TLSv1.2". If an older Postfix version is linked against OpenSSL
+1.0.1 or later, these, or any other new protocol versions, are
+unconditionally enabled. </p>
+
<p> To include a protocol list its name, to exclude it, prefix the name
with a "!" character. To exclude SSLv2 even for opportunistic TLS set
"smtpd_tls_protocols = !SSLv2". To exclude both "SSLv2" and "SSLv3" set
"smtpd_tls_protocols = !SSLv2, !SSLv3". Explicitly listing the protocols to
-include, is supported, but not recommended. OpenSSL provides no mechanisms
-for excluding protocols not known at compile-time. If Postfix is linked
-against an OpenSSL library that supports additional protocol versions,
-they cannot be excluded using either syntax. </p>
+include, rather than protocols to exclude, is supported, but not
+recommended. The exclusion form more closely matches the behaviour
+when the OpenSSL library is newer than Postfix. </p>
<p> Example: </p>
<pre>
extern char *var_smtpd_tls_proto;
#define VAR_SMTPD_TLS_MAND_PROTO "smtpd_tls_mandatory_protocols"
-#define DEF_SMTPD_TLS_MAND_PROTO "SSLv3, TLSv1"
+#define DEF_SMTPD_TLS_MAND_PROTO "!SSLv2"
extern char *var_smtpd_tls_mand_proto;
#define VAR_SMTPD_TLS_CIPH "smtpd_tls_ciphers"
extern char *var_smtp_tls_proto;
#define VAR_SMTP_TLS_MAND_PROTO "smtp_tls_mandatory_protocols"
-#define DEF_SMTP_TLS_MAND_PROTO "SSLv3, TLSv1"
+#define DEF_SMTP_TLS_MAND_PROTO "!SSLv2"
#define VAR_LMTP_TLS_MAND_PROTO "lmtp_tls_mandatory_protocols"
-#define DEF_LMTP_TLS_MAND_PROTO "SSLv3, TLSv1"
+#define DEF_LMTP_TLS_MAND_PROTO "!SSLv2"
extern char *var_smtp_tls_mand_proto;
#define VAR_SMTP_TLS_VFY_CMATCH "smtp_tls_verify_cert_match"
* Patches change both the patchlevel and the release date. Snapshots have no
* patchlevel; they change the release date only.
*/
-#define MAIL_RELEASE_DATE "20120204"
-#define MAIL_VERSION_NUMBER "2.7.8"
+#define MAIL_RELEASE_DATE "20120424"
+#define MAIL_VERSION_NUMBER "2.7.9"
#ifdef SNAPSHOT
# define MAIL_VERSION_DATE "-" MAIL_RELEASE_DATE
if (isatty(STDERR_FILENO))
msg_vstream_init(tag, VSTREAM_ERR);
msg_syslog_init(tag, LOG_PID, LOG_FACILITY);
- tag = 0;
/*
* Parse switches.
/* Optional lookup tables with the Postfix SMTP client TLS security
/* policy by next-hop destination; when a non-empty value is specified,
/* this overrides the obsolete smtp_tls_per_site parameter.
-/* .IP "\fBsmtp_tls_mandatory_protocols (SSLv3, TLSv1)\fR"
+/* .IP "\fBsmtp_tls_mandatory_protocols (!SSLv2)\fR"
/* List of SSL/TLS protocols that the Postfix SMTP client will use with
/* mandatory TLS encryption.
/* .IP "\fBsmtp_tls_scert_verifydepth (9)\fR"
/* .IP "\fBsmtpd_tls_mandatory_exclude_ciphers (empty)\fR"
/* Additional list of ciphers or cipher types to exclude from the
/* SMTP server cipher list at mandatory TLS security levels.
-/* .IP "\fBsmtpd_tls_mandatory_protocols (SSLv3, TLSv1)\fR"
+/* .IP "\fBsmtpd_tls_mandatory_protocols (!SSLv2)\fR"
/* The SSL/TLS protocols accepted by the Postfix SMTP server with
/* mandatory TLS encryption.
/* .IP "\fBsmtpd_tls_received_header (no)\fR"
#define TLS_PROTOCOL_SSLv2 (1<<0) /* SSLv2 */
#define TLS_PROTOCOL_SSLv3 (1<<1) /* SSLv3 */
#define TLS_PROTOCOL_TLSv1 (1<<2) /* TLSv1 */
+#ifdef SSL_TXT_TLSV1_1
+#define TLS_PROTOCOL_TLSv1_1 (1<<3) /* TLSv1_1 */
+#else
+#define TLS_PROTOCOL_TLSv1_1 0 /* Unknown */
+#endif
+#ifdef SSL_TXT_TLSV1_2
+#define TLS_PROTOCOL_TLSv1_2 (1<<4) /* TLSv1_2 */
+#else
+#define TLS_PROTOCOL_TLSv1_2 0 /* Unknown */
+#endif
#define TLS_KNOWN_PROTOCOLS \
- ( TLS_PROTOCOL_SSLv2 | TLS_PROTOCOL_SSLv3 | TLS_PROTOCOL_TLSv1 )
+ ( TLS_PROTOCOL_SSLv2 | TLS_PROTOCOL_SSLv3 | TLS_PROTOCOL_TLSv1 \
+ | TLS_PROTOCOL_TLSv1_1 | TLS_PROTOCOL_TLSv1_2 )
extern int tls_protocol_mask(const char *);
if (protomask != 0)
SSL_set_options(TLScontext->con,
((protomask & TLS_PROTOCOL_TLSv1) ? SSL_OP_NO_TLSv1 : 0L)
+#ifdef SSL_OP_NO_TLSv1_1
+ | ((protomask & TLS_PROTOCOL_TLSv1_1) ? SSL_OP_NO_TLSv1_1 : 0L)
+#endif
+#ifdef SSL_OP_NO_TLSv1_2
+ | ((protomask & TLS_PROTOCOL_TLSv1_2) ? SSL_OP_NO_TLSv1_2 : 0L)
+#endif
| ((protomask & TLS_PROTOCOL_SSLv3) ? SSL_OP_NO_SSLv3 : 0L)
| ((protomask & TLS_PROTOCOL_SSLv2) ? SSL_OP_NO_SSLv2 : 0L));
SSL_TXT_SSLV2, TLS_PROTOCOL_SSLv2,
SSL_TXT_SSLV3, TLS_PROTOCOL_SSLv3,
SSL_TXT_TLSV1, TLS_PROTOCOL_TLSv1,
+#ifdef SSL_TXT_TLSV1_1
+ SSL_TXT_TLSV1_1, TLS_PROTOCOL_TLSv1_1,
+#endif
+#ifdef SSL_TXT_TLSV1_2
+ SSL_TXT_TLSV1_2, TLS_PROTOCOL_TLSv1_2,
+#endif
0, TLS_PROTOCOL_INVALID,
};
if (protomask != 0)
SSL_CTX_set_options(server_ctx,
((protomask & TLS_PROTOCOL_TLSv1) ? SSL_OP_NO_TLSv1 : 0L)
+#ifdef SSL_OP_NO_TLSv1_1
+ | ((protomask & TLS_PROTOCOL_TLSv1_1) ? SSL_OP_NO_TLSv1_1 : 0L)
+#endif
+#ifdef SSL_OP_NO_TLSv1_2
+ | ((protomask & TLS_PROTOCOL_TLSv1_2) ? SSL_OP_NO_TLSv1_2 : 0L)
+#endif
| ((protomask & TLS_PROTOCOL_SSLv3) ? SSL_OP_NO_SSLv3 : 0L)
| ((protomask & TLS_PROTOCOL_SSLv2) ? SSL_OP_NO_SSLv2 : 0L));
extern XSASL_SERVER_IMPL *xsasl_cyrus_server_init(const char *, const char *);
extern XSASL_CLIENT_IMPL *xsasl_cyrus_client_init(const char *, const char *);
+ /*
+ * Internal definitions for client and server module.
+ */
+typedef int (*XSASL_CYRUS_CB) (void);
+
#endif
/* LICENSE
* Global callbacks. These have no per-session context.
*/
static sasl_callback_t callbacks[] = {
- {SASL_CB_LOG, &xsasl_cyrus_log, 0},
+ {SASL_CB_LOG, (XSASL_CYRUS_CB) &xsasl_cyrus_log, 0},
{SASL_CB_LIST_END, 0, 0}
};
{
XSASL_CYRUS_CLIENT *client = 0;
static sasl_callback_t callbacks[] = {
- {SASL_CB_USER, &xsasl_cyrus_client_get_user, 0},
- {SASL_CB_AUTHNAME, &xsasl_cyrus_client_get_user, 0},
- {SASL_CB_PASS, &xsasl_cyrus_client_get_passwd, 0},
+ {SASL_CB_USER, (XSASL_CYRUS_CB) &xsasl_cyrus_client_get_user, 0},
+ {SASL_CB_AUTHNAME, (XSASL_CYRUS_CB) &xsasl_cyrus_client_get_user, 0},
+ {SASL_CB_PASS, (XSASL_CYRUS_CB) &xsasl_cyrus_client_get_passwd, 0},
{SASL_CB_LIST_END, 0, 0}
};
sasl_conn_t *sasl_conn = 0;
#define NO_CALLBACK_CONTEXT 0
static sasl_callback_t callbacks[] = {
- {SASL_CB_LOG, &xsasl_cyrus_log, NO_CALLBACK_CONTEXT},
+ {SASL_CB_LOG, (XSASL_CYRUS_CB) &xsasl_cyrus_log, NO_CALLBACK_CONTEXT},
{SASL_CB_LIST_END, 0, 0}
};
projects / thirdparty / postfix.git / commitdiff
