beagle: beagley-ai: env: Setup scripts for LED control

Most of the users of BeagleY-AI are headless OR do not use serial port.
In such cases, it is very useful for the device to provide some level of
indication to know what state their board is at.

Unfortunately, with a single LED (ignoring the :heartbeat), the
options are limited. This is a precursor patch to actually enabling
the LED options that will use the same in the follow on patches.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>

diff --git a/board/beagle/beagley-ai/beagley-ai.env b/board/beagle/beagley-ai/beagley-ai.env
index db29d13420aa704f812f48a40310fa2509e2813c..16a03acfca3cf90094ad9af5fbfc3428b2179d4b 100644 (file)
--- a/board/beagle/beagley-ai/beagley-ai.env
+++ b/board/beagle/beagley-ai/beagley-ai.env
@@ -10,6 +10,8 @@ console=ttyS2,115200n8
 args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02800000
        ${mtdparts}
 run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
+set_led_state_fail_load=led led-0 off
+set_led_state_start_load=led led-0 on
 
 boot_targets=mmc1
 bootmeths=script extlinux efi pxe