qualcommax: cleanup device tree for GL-B3000

Remove extra blank lines.
Fixes typo for label and status.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://github.com/openwrt/openwrt/pull/19400
Signed-off-by: Robert Marko <robimarko@gmail.com>

diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-gl-b3000.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-gl-b3000.dts
index 3fd16bdc9d4b41db6887d77713b1eb396ae2d99d..1e60ed8c97557d66d890eba85fa3f2186ba8dd57 100644 (file)
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-gl-b3000.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq5018-gl-b3000.dts
@@ -9,7 +9,7 @@
 
 / {
        model = "GL.iNet GL-B3000";
-       compatible ="glinet,gl-b3000", "qcom,ipq5018";
+       compatible = "glinet,gl-b3000", "qcom,ipq5018";
 
        aliases {
                ethernet1 = &dp2;
@@ -31,7 +31,7 @@
                pinctrl-0 = <&button_pins>;
                pinctrl-names = "default";
 
-               button_reset {
+               button-reset {
                        label = "reset";
                        gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
                        linux,code = <KEY_RESTART>;
@@ -43,23 +43,20 @@
                pinctrl-0 = <&leds_pins>;
                pinctrl-names = "default";
 
-               led_system_blue: led_system_blue {
+               led_system_blue: system-blue {
                        color = <LED_COLOR_ID_BLUE>;
-                       function = LED_FUNCTION_POWER;
+                       function = LED_FUNCTION_STATUS;
                        gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
-                       default-state = "on";
                };
 
-               led_status_white: led_status_white {
+               led_status_white: status-white {
                        color = <LED_COLOR_ID_WHITE>;
-                       function = LED_FUNCTION_POWER;
+                       function = LED_FUNCTION_STATUS;
                        gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
                };
        };
 
        reserved-memory {
-
                q6_mem_regions: q6_mem_regions@4b000000 {
                        no-map;
                        reg = <0x0 0x4b000000 0x0 0x3000000>;
@@ -72,7 +69,6 @@
        switch_mac_mode = <MAC_MODE_SGMII_CHANNEL0>;
 
        qcom,port_phyinfo {
-
                // MAC0 -> GE Phy -> QCA8337 Phy2
                port@0 {
                        port_id = <1>;
@@ -189,9 +185,9 @@
 };
 
 &blsp1_uart1 {
-       status = "okay";
        pinctrl-0 = <&serial_0_pins>;
        pinctrl-names = "default";
+       status = "okay";
 };
 
 &crypto {
@@ -256,7 +252,6 @@
 
 &tlmm {
        mdio1_pins: mdio-state {
-
                mdc-pins {
                        pins = "gpio36";
                        function = "mdc";
@@ -287,7 +282,6 @@
        };
 
        qpic_pins: qpic-state {
-
                clock-pins {
                        pins = "gpio9";
                        function = "qspi_clk";
@@ -311,9 +305,7 @@
        };
 
        serial_0_pins: uart0-state {
-               pins =
-                       "gpio20", // RX
-                       "gpio21"; // TX
+               pins = "gpio20", "gpio21";
                function = "blsp0_uart0";
                drive-strength = <8>;
                bias-disable;