-# Uncrustify 0.59
+# Uncrustify-0.66.1_f
#
# General options
#
-# The type of line endings
-newlines = lf # auto/lf/crlf/cr
+# The type of line endings. Default=Auto.
+newlines = lf # auto/lf/crlf/cr
-# The original size of tabs in the input
-input_tab_size = 2 # number
+# The original size of tabs in the input. Default=8.
+input_tab_size = 2 # unsigned number
-# The size of tabs in the output (only used if align_with_tabs=true)
-output_tab_size = 2 # number
+# The size of tabs in the output (only used if align_with_tabs=true). Default=8.
+output_tab_size = 2 # unsigned number
-# The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn)
-string_escape_char = 92 # number
+# The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn).
+string_escape_char = 92 # unsigned number
# Alternate string escape char for Pawn. Only works right before the quote char.
-string_escape_char2 = 0 # number
+string_escape_char2 = 0 # unsigned number
+
+# Replace tab characters found in string literals with the escape sequence \t instead.
+string_replace_tab_chars = false # false/true
# Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'.
-# If true (default), 'assert(x<0 && y>=3)' will be broken.
+# If True, 'assert(x<0 && y>=3)' will be broken. Default=False
# Improvements to template detection may make this option obsolete.
-tok_split_gte = false # false/true
-
-# Control what to do with the UTF-8 BOM (recommed 'remove')
-utf8_bom = remove # ignore/add/remove/force
-
-# If the file only contains chars between 128 and 255 and is not UTF-8, then output as UTF-8
-utf8_byte = false # false/true
-
-# Force the output encoding to UTF-8
-utf8_force = false # false/true
-
-#
-# Indenting
-#
-
-# The number of columns to indent per level.
-# Usually 2, 3, 4, or 8.
-indent_columns = 2 # number
-
-# The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
-# For FreeBSD, this is set to 4.
-indent_continue = 0 # number
-
-# How to use tabs when indenting code
-# 0=spaces only
-# 1=indent with tabs to brace level, align with spaces
-# 2=indent and align with tabs, using spaces when not on a tabstop
-indent_with_tabs = 1 # number
-
-# Comments that are not a brace level are indented with tabs on a tabstop.
-# Requires indent_with_tabs=2. If false, will use spaces.
-indent_cmt_with_tabs = false # false/true
-
-# Whether to indent strings broken by '\' so that they line up
-indent_align_string = false # false/true
-
-# The number of spaces to indent multi-line XML strings.
-# Requires indent_align_string=True
-indent_xml_string = 0 # number
-
-# Spaces to indent '{' from level
-indent_brace = 0 # number
-
-# Whether braces are indented to the body level
-indent_braces = false # false/true
-
-# Disabled indenting function braces if indent_braces is true
-indent_braces_no_func = false # false/true
-
-# Disabled indenting class braces if indent_braces is true
-indent_braces_no_class = false # false/true
-
-# Disabled indenting struct braces if indent_braces is true
-indent_braces_no_struct = false # false/true
-
-# Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.
-indent_brace_parent = false # false/true
-
-# Whether the 'namespace' body is indented
-indent_namespace = false # false/true
-
-# The number of spaces to indent a namespace block
-indent_namespace_level = 0 # number
-
-# If the body of the namespace is longer than this number, it won't be indented.
-# Requires indent_namespace=true. Default=0 (no limit)
-indent_namespace_limit = 0 # number
+tok_split_gte = false # false/true
-# Whether the 'extern "C"' body is indented
-indent_extern = false # false/true
+# Override the default ' *INDENT-OFF*' in comments for disabling processing of part of the file.
+disable_processing_cmt = "" # string
-# Whether the 'class' body is indented
-indent_class = false # false/true
+# Override the default ' *INDENT-ON*' in comments for enabling processing of part of the file.
+enable_processing_cmt = "" # string
-# Whether to indent the stuff after a leading class colon
-indent_class_colon = false # false/true
+# Enable parsing of digraphs. Default=False.
+enable_digraphs = false # false/true
-# Additional indenting for constructor initializer list
-indent_ctor_init = 0 # number
+# Control what to do with the UTF-8 BOM (recommend 'remove').
+utf8_bom = remove # ignore/add/remove/force
-# False=treat 'else\nif' as 'else if' for indenting purposes
-# True=indent the 'if' one level
-indent_else_if = false # false/true
+# If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8.
+utf8_byte = false # false/true
-# Amount to indent variable declarations after an open brace. neg=relative, pos=absolute
-indent_var_def_blk = 0 # number
+# Force the output encoding to UTF-8.
+utf8_force = false # false/true
-# Indent continued variable declarations instead of aligning.
-indent_var_def_cont = false # false/true
+#
+# Spacing options
+#
-# True: indent continued function call parameters one indent level
-# False: align parameters under the open paren
-indent_func_call_param = false # false/true
+# Add or remove space around arithmetic operator '+', '-', '/', '*', etc
+# also '>>>' '<<' '>>' '%' '|'.
+sp_arith = ignore # ignore/add/remove/force
-# Same as indent_func_call_param, but for function defs
-indent_func_def_param = false # false/true
+# Add or remove space around arithmetic operator '+' and '-'. Overrides sp_arith
+sp_arith_additive = ignore # ignore/add/remove/force
-# Same as indent_func_call_param, but for function protos
-indent_func_proto_param = false # false/true
+# Add or remove space around assignment operator '=', '+=', etc.
+sp_assign = ignore # ignore/add/remove/force
-# Same as indent_func_call_param, but for class declarations
-indent_func_class_param = false # false/true
+# Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign.
+sp_cpp_lambda_assign = ignore # ignore/add/remove/force
-# Same as indent_func_call_param, but for class variable constructors
-indent_func_ctor_var_param = false # false/true
+# Add or remove space after the capture specification in C++11 lambda.
+sp_cpp_lambda_paren = ignore # ignore/add/remove/force
-# Same as indent_func_call_param, but for templates
-indent_template_param = false # false/true
+# Add or remove space around assignment operator '=' in a prototype.
+sp_assign_default = ignore # ignore/add/remove/force
-# Double the indent for indent_func_xxx_param options
-indent_func_param_double = false # false/true
+# Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign.
+sp_before_assign = force # ignore/add/remove/force
-# Indentation column for standalone 'const' function decl/proto qualifier
-indent_func_const = 0 # number
+# Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign.
+sp_after_assign = force # ignore/add/remove/force
-# Indentation column for standalone 'throw' function decl/proto qualifier
-indent_func_throw = 0 # number
+# Add or remove space in 'NS_ENUM ('.
+sp_enum_paren = ignore # ignore/add/remove/force
-# The number of spaces to indent a continued '->' or '.'
-# Usually set to 0, 1, or indent_columns.
-indent_member = 0 # number
+# Add or remove space around assignment '=' in enum.
+sp_enum_assign = ignore # ignore/add/remove/force
-# Spaces to indent single line ('//') comments on lines before code
-indent_sing_line_comments = 0 # number
+# Add or remove space before assignment '=' in enum. Overrides sp_enum_assign.
+sp_enum_before_assign = ignore # ignore/add/remove/force
-# If set, will indent trailing single line ('//') comments relative
-# to the code instead of trying to keep the same absolute column
-indent_relative_single_line_comments = false # false/true
+# Add or remove space after assignment '=' in enum. Overrides sp_enum_assign.
+sp_enum_after_assign = ignore # ignore/add/remove/force
-# Spaces to indent 'case' from 'switch'
-# Usually 0 or indent_columns.
-indent_switch_case = 0 # number
+# Add or remove space around assignment ':' in enum.
+sp_enum_colon = ignore # ignore/add/remove/force
-# Spaces to shift the 'case' line, without affecting any other lines
-# Usually 0.
-indent_case_shift = 0 # number
+# Add or remove space around preprocessor '##' concatenation operator. Default=Add.
+sp_pp_concat = add # ignore/add/remove/force
-# Spaces to indent '{' from 'case'.
-# By default, the brace will appear under the 'c' in case.
-# Usually set to 0 or indent_columns.
-indent_case_brace = 0 # number
+# Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator.
+sp_pp_stringify = ignore # ignore/add/remove/force
-# Whether to indent comments found in first column
-indent_col1_comment = false # false/true
+# Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'.
+sp_before_pp_stringify = ignore # ignore/add/remove/force
-# How to indent goto labels
-# >0 : absolute column where 1 is the leftmost column
-# <=0 : subtract from brace indent
-indent_label = 1 # number
+# Add or remove space around boolean operators '&&' and '||'.
+sp_bool = force # ignore/add/remove/force
-# Same as indent_label, but for access specifiers that are followed by a colon
-indent_access_spec = 1 # number
+# Add or remove space around compare operator '<', '>', '==', etc.
+sp_compare = force # ignore/add/remove/force
-# Indent the code after an access specifier by one level.
-# If set, this option forces 'indent_access_spec=0'
-indent_access_spec_body = false # false/true
+# Add or remove space inside '(' and ')'.
+sp_inside_paren = remove # ignore/add/remove/force
-# If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended)
-indent_paren_nl = false # false/true
+# Add or remove space between nested parens: '((' vs ') )'.
+sp_paren_paren = remove # ignore/add/remove/force
-# Controls the indent of a close paren after a newline.
-# 0: Indent to body level
-# 1: Align under the open paren
-# 2: Indent to the brace level
-indent_paren_close = 0 # number
+# Add or remove space between back-to-back parens: ')(' vs ') ('.
+sp_cparen_oparen = ignore # ignore/add/remove/force
-# Controls the indent of a comma when inside a paren.If TRUE, aligns under the open paren
-indent_comma_paren = false # false/true
+# Whether to balance spaces inside nested parens.
+sp_balance_nested_parens = false # false/true
-# Controls the indent of a BOOL operator when inside a paren.If TRUE, aligns under the open paren
-indent_bool_paren = false # false/true
+# Add or remove space between ')' and '{'.
+sp_paren_brace = force # ignore/add/remove/force
-# If 'indent_bool_paren' is true, controls the indent of the first expression. If TRUE, aligns the first expression to the following ones
-indent_first_bool_expr = false # false/true
+# Add or remove space before pointer star '*'.
+sp_before_ptr_star = force # ignore/add/remove/force
-# If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended)
-indent_square_nl = false # false/true
+# Add or remove space before pointer star '*' that isn't followed by a variable name
+# If set to 'ignore', sp_before_ptr_star is used instead.
+sp_before_unnamed_ptr_star = force # ignore/add/remove/force
-# Don't change the relative indent of ESQL/C 'EXEC SQL' bodies
-indent_preserve_sql = false # false/true
+# Add or remove space between pointer stars '*'.
+sp_between_ptr_star = remove # ignore/add/remove/force
-# Align continued statements at the '='. Default=True
-# If FALSE or the '=' is followed by a newline, the next line is indent one tab.
-indent_align_assign = true # false/true
+# Add or remove space after pointer star '*', if followed by a word.
+sp_after_ptr_star = remove # ignore/add/remove/force
-#
-# Spacing options
-#
+# Add or remove space after pointer star '*', if followed by a qualifier.
+sp_after_ptr_star_qualifier = ignore # ignore/add/remove/force
-# Add or remove space around arithmetic operator '+', '-', '/', '*', etc
-sp_arith = ignore # ignore/add/remove/force
+# Add or remove space after a pointer star '*', if followed by a func proto/def.
+sp_after_ptr_star_func = ignore # ignore/add/remove/force
-# Add or remove space around assignment operator '=', '+=', etc
-sp_assign = ignore # ignore/add/remove/force
+# Add or remove space after a pointer star '*', if followed by an open paren (function types).
+sp_ptr_star_paren = ignore # ignore/add/remove/force
-# Add or remove space around assignment operator '=' in a prototype
-sp_assign_default = ignore # ignore/add/remove/force
+# Add or remove space before a pointer star '*', if followed by a func proto/def.
+sp_before_ptr_star_func = ignore # ignore/add/remove/force
-# Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign.
-sp_before_assign = force # ignore/add/remove/force
+# Add or remove space before a reference sign '&'.
+sp_before_byref = ignore # ignore/add/remove/force
-# Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign.
-sp_after_assign = force # ignore/add/remove/force
+# Add or remove space before a reference sign '&' that isn't followed by a variable name.
+# If set to 'ignore', sp_before_byref is used instead.
+sp_before_unnamed_byref = ignore # ignore/add/remove/force
-# Add or remove space around assignment '=' in enum
-sp_enum_assign = ignore # ignore/add/remove/force
+# Add or remove space after reference sign '&', if followed by a word.
+sp_after_byref = ignore # ignore/add/remove/force
-# Add or remove space before assignment '=' in enum. Overrides sp_enum_assign.
-sp_enum_before_assign = ignore # ignore/add/remove/force
+# Add or remove space after a reference sign '&', if followed by a func proto/def.
+sp_after_byref_func = ignore # ignore/add/remove/force
-# Add or remove space after assignment '=' in enum. Overrides sp_enum_assign.
-sp_enum_after_assign = ignore # ignore/add/remove/force
+# Add or remove space before a reference sign '&', if followed by a func proto/def.
+sp_before_byref_func = ignore # ignore/add/remove/force
-# Add or remove space around preprocessor '##' concatenation operator. Default=Add
-sp_pp_concat = add # ignore/add/remove/force
+# Add or remove space between type and word. Default=Force.
+sp_after_type = force # ignore/add/remove/force
-# Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator. Default=Add
-sp_pp_stringify = ignore # ignore/add/remove/force
+# Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('.
+sp_before_template_paren = ignore # ignore/add/remove/force
-# Add or remove space around boolean operators '&&' and '||'
-sp_bool = force # ignore/add/remove/force
+# Add or remove space in 'template <' vs 'template<'.
+# If set to ignore, sp_before_angle is used.
+sp_template_angle = ignore # ignore/add/remove/force
-# Add or remove space around compare operator '<', '>', '==', etc
-sp_compare = force # ignore/add/remove/force
+# Add or remove space before '<>'.
+sp_before_angle = ignore # ignore/add/remove/force
-# Add or remove space inside '(' and ')'
-sp_inside_paren = remove # ignore/add/remove/force
+# Add or remove space inside '<' and '>'.
+sp_inside_angle = ignore # ignore/add/remove/force
-# Add or remove space between nested parens
-sp_paren_paren = remove # ignore/add/remove/force
+# Add or remove space between '<>' and ':'.
+sp_angle_colon = ignore # ignore/add/remove/force
-# Whether to balance spaces inside nested parens
-sp_balance_nested_parens = false # false/true
+# Add or remove space after '<>'.
+sp_after_angle = ignore # ignore/add/remove/force
-# Add or remove space between ')' and '{'
-sp_paren_brace = force # ignore/add/remove/force
+# Add or remove space between '<>' and '(' as found in 'new List<byte>(foo);'.
+sp_angle_paren = ignore # ignore/add/remove/force
-# Add or remove space before pointer star '*'
-sp_before_ptr_star = force # ignore/add/remove/force
+# Add or remove space between '<>' and '()' as found in 'new List<byte>();'.
+sp_angle_paren_empty = ignore # ignore/add/remove/force
-# Add or remove space before pointer star '*' that isn't followed by a variable name
-# If set to 'ignore', sp_before_ptr_star is used instead.
-sp_before_unnamed_ptr_star = force # ignore/add/remove/force
+# Add or remove space between '<>' and a word as in 'List<byte> m;' or 'template <typename T> static ...'.
+sp_angle_word = ignore # ignore/add/remove/force
-# Add or remove space between pointer stars '*'
-sp_between_ptr_star = remove # ignore/add/remove/force
+# Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add.
+sp_angle_shift = add # ignore/add/remove/force
-# Add or remove space after pointer star '*', if followed by a word.
-sp_after_ptr_star = remove # ignore/add/remove/force
+# Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False.
+# sp_angle_shift cannot remove the space without this option.
+sp_permit_cpp11_shift = false # false/true
-# Add or remove space after a pointer star '*', if followed by a func proto/def.
-sp_after_ptr_star_func = ignore # ignore/add/remove/force
+# Add or remove space before '(' of 'if', 'for', 'switch', 'while', etc.
+sp_before_sparen = force # ignore/add/remove/force
-# Add or remove space before a pointer star '*', if followed by a func proto/def.
-sp_before_ptr_star_func = ignore # ignore/add/remove/force
+# Add or remove space inside if-condition '(' and ')'.
+sp_inside_sparen = remove # ignore/add/remove/force
-# Add or remove space before a reference sign '&'
-sp_before_byref = ignore # ignore/add/remove/force
+# Add or remove space before if-condition ')'. Overrides sp_inside_sparen.
+sp_inside_sparen_close = ignore # ignore/add/remove/force
-# Add or remove space before a reference sign '&' that isn't followed by a variable name
-# If set to 'ignore', sp_before_byref is used instead.
-sp_before_unnamed_byref = ignore # ignore/add/remove/force
+# Add or remove space after if-condition '('. Overrides sp_inside_sparen.
+sp_inside_sparen_open = ignore # ignore/add/remove/force
-# Add or remove space after reference sign '&', if followed by a word.
-sp_after_byref = ignore # ignore/add/remove/force
+# Add or remove space after ')' of 'if', 'for', 'switch', and 'while', etc.
+sp_after_sparen = force # ignore/add/remove/force
-# Add or remove space after a reference sign '&', if followed by a func proto/def.
-sp_after_byref_func = ignore # ignore/add/remove/force
+# Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while', etc.
+sp_sparen_brace = force # ignore/add/remove/force
-# Add or remove space before a reference sign '&', if followed by a func proto/def.
-sp_before_byref_func = ignore # ignore/add/remove/force
+# Add or remove space between 'invariant' and '(' in the D language.
+sp_invariant_paren = ignore # ignore/add/remove/force
-# Add or remove space between type and word. Default=Force
-sp_after_type = force # ignore/add/remove/force
+# Add or remove space after the ')' in 'invariant (C) c' in the D language.
+sp_after_invariant_paren = ignore # ignore/add/remove/force
-# Add or remove space in 'template <' vs 'template<'.
-# If set to ignore, sp_before_angle is used.
-sp_template_angle = ignore # ignore/add/remove/force
+# Add or remove space before empty statement ';' on 'if', 'for' and 'while'.
+sp_special_semi = ignore # ignore/add/remove/force
-# Add or remove space before '<>'
-sp_before_angle = ignore # ignore/add/remove/force
+# Add or remove space before ';'. Default=Remove.
+sp_before_semi = remove # ignore/add/remove/force
-# Add or remove space inside '<' and '>'
-sp_inside_angle = ignore # ignore/add/remove/force
+# Add or remove space before ';' in non-empty 'for' statements.
+sp_before_semi_for = ignore # ignore/add/remove/force
-# Add or remove space after '<>'
-sp_after_angle = ignore # ignore/add/remove/force
+# Add or remove space before a semicolon of an empty part of a for statement.
+sp_before_semi_for_empty = ignore # ignore/add/remove/force
-# Add or remove space between '<>' and '(' as found in 'new List<byte>();'
-sp_angle_paren = ignore # ignore/add/remove/force
+# Add or remove space after ';', except when followed by a comment. Default=Add.
+sp_after_semi = add # ignore/add/remove/force
-# Add or remove space between '<>' and a word as in 'List<byte> m;'
-sp_angle_word = ignore # ignore/add/remove/force
+# Add or remove space after ';' in non-empty 'for' statements. Default=Force.
+sp_after_semi_for = force # ignore/add/remove/force
-# Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add
-sp_angle_shift = add # ignore/add/remove/force
+# Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; <here> ).
+sp_after_semi_for_empty = ignore # ignore/add/remove/force
-# Add or remove space before '(' of 'if', 'for', 'switch', and 'while'
-sp_before_sparen = force # ignore/add/remove/force
+# Add or remove space before '[' (except '[]').
+sp_before_square = remove # ignore/add/remove/force
-# Add or remove space inside if-condition '(' and ')'
-sp_inside_sparen = remove # ignore/add/remove/force
+# Add or remove space before '[]'.
+sp_before_squares = remove # ignore/add/remove/force
-# Add or remove space before if-condition ')'. Overrides sp_inside_sparen.
-sp_inside_sparen_close = ignore # ignore/add/remove/force
+# Add or remove space inside a non-empty '[' and ']'.
+sp_inside_square = remove # ignore/add/remove/force
-# Add or remove space after ')' of 'if', 'for', 'switch', and 'while'
-sp_after_sparen = force # ignore/add/remove/force
+# Add or remove space after ',', 'a,b' vs 'a, b'.
+sp_after_comma = add # ignore/add/remove/force
-# Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while'
-sp_sparen_brace = force # ignore/add/remove/force
+# Add or remove space before ','. Default=Remove.
+sp_before_comma = remove # ignore/add/remove/force
-# Add or remove space between 'invariant' and '(' in the D language.
-sp_invariant_paren = ignore # ignore/add/remove/force
+# Add or remove space between ',' and ']' in multidimensional array type 'int[,,]'. Only for C#.
+sp_after_mdatype_commas = ignore # ignore/add/remove/force
-# Add or remove space after the ')' in 'invariant (C) c' in the D language.
-sp_after_invariant_paren = ignore # ignore/add/remove/force
+# Add or remove space between '[' and ',' in multidimensional array type 'int[,,]'. Only for C#.
+sp_before_mdatype_commas = ignore # ignore/add/remove/force
-# Add or remove space before empty statement ';' on 'if', 'for' and 'while'
-sp_special_semi = ignore # ignore/add/remove/force
+# Add or remove space between ',' in multidimensional array type 'int[,,]'. Only for C#.
+sp_between_mdatype_commas = ignore # ignore/add/remove/force
-# Add or remove space before ';'. Default=Remove
-sp_before_semi = remove # ignore/add/remove/force
+# Add or remove space between an open paren and comma: '(,' vs '( ,'. Default=Force.
+sp_paren_comma = force # ignore/add/remove/force
-# Add or remove space before ';' in non-empty 'for' statements
-sp_before_semi_for = ignore # ignore/add/remove/force
+# Add or remove space before the variadic '...' when preceded by a non-punctuator.
+sp_before_ellipsis = ignore # ignore/add/remove/force
-# Add or remove space before a semicolon of an empty part of a for statement.
-sp_before_semi_for_empty = ignore # ignore/add/remove/force
+# Add or remove space after class ':'.
+sp_after_class_colon = ignore # ignore/add/remove/force
-# Add or remove space after ';', except when followed by a comment. Default=Add
-sp_after_semi = add # ignore/add/remove/force
+# Add or remove space before class ':'.
+sp_before_class_colon = ignore # ignore/add/remove/force
-# Add or remove space after ';' in non-empty 'for' statements. Default=Force
-sp_after_semi_for = force # ignore/add/remove/force
+# Add or remove space after class constructor ':'.
+sp_after_constr_colon = ignore # ignore/add/remove/force
-# Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; <here> ).
-sp_after_semi_for_empty = ignore # ignore/add/remove/force
+# Add or remove space before class constructor ':'.
+sp_before_constr_colon = ignore # ignore/add/remove/force
-# Add or remove space before '[' (except '[]')
-sp_before_square = remove # ignore/add/remove/force
+# Add or remove space before case ':'. Default=Remove.
+sp_before_case_colon = remove # ignore/add/remove/force
-# Add or remove space before '[]'
-sp_before_squares = remove # ignore/add/remove/force
+# Add or remove space between 'operator' and operator sign.
+sp_after_operator = ignore # ignore/add/remove/force
-# Add or remove space inside a non-empty '[' and ']'
-sp_inside_square = remove # ignore/add/remove/force
+# Add or remove space between the operator symbol and the open paren, as in 'operator ++('.
+sp_after_operator_sym = ignore # ignore/add/remove/force
-# Add or remove space after ','
-sp_after_comma = add # ignore/add/remove/force
+# Overrides sp_after_operator_sym when the operator has no arguments, as in 'operator *()'.
+sp_after_operator_sym_empty = ignore # ignore/add/remove/force
-# Add or remove space before ','
-sp_before_comma = remove # ignore/add/remove/force
+# Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'.
+sp_after_cast = ignore # ignore/add/remove/force
-# Add or remove space between an open paren and comma: '(,' vs '( ,'
-sp_paren_comma = force # ignore/add/remove/force
+# Add or remove spaces inside cast parens.
+sp_inside_paren_cast = ignore # ignore/add/remove/force
-# Add or remove space before the variadic '...' when preceded by a non-punctuator
-sp_before_ellipsis = ignore # ignore/add/remove/force
+# Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)'.
+sp_cpp_cast_paren = ignore # ignore/add/remove/force
-# Add or remove space after class ':'
-sp_after_class_colon = ignore # ignore/add/remove/force
+# Add or remove space between 'sizeof' and '('.
+sp_sizeof_paren = ignore # ignore/add/remove/force
-# Add or remove space before class ':'
-sp_before_class_colon = ignore # ignore/add/remove/force
+# Add or remove space after the tag keyword (Pawn).
+sp_after_tag = ignore # ignore/add/remove/force
-# Add or remove space before case ':'. Default=Remove
-sp_before_case_colon = remove # ignore/add/remove/force
+# Add or remove space inside enum '{' and '}'.
+sp_inside_braces_enum = ignore # ignore/add/remove/force
-# Add or remove space between 'operator' and operator sign
-sp_after_operator = ignore # ignore/add/remove/force
+# Add or remove space inside struct/union '{' and '}'.
+sp_inside_braces_struct = ignore # ignore/add/remove/force
-# Add or remove space between the operator symbol and the open paren, as in 'operator ++('
-sp_after_operator_sym = ignore # ignore/add/remove/force
+# Add or remove space after open brace in an unnamed temporary direct-list-initialization.
+sp_after_type_brace_init_lst_open = ignore # ignore/add/remove/force
-# Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'
-sp_after_cast = ignore # ignore/add/remove/force
+# Add or remove space before close brace in an unnamed temporary direct-list-initialization.
+sp_before_type_brace_init_lst_close = ignore # ignore/add/remove/force
-# Add or remove spaces inside cast parens
-sp_inside_paren_cast = ignore # ignore/add/remove/force
+# Add or remove space inside an unnamed temporary direct-list-initialization.
+sp_inside_type_brace_init_lst = ignore # ignore/add/remove/force
-# Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)'
-sp_cpp_cast_paren = ignore # ignore/add/remove/force
+# Add or remove space inside '{' and '}'.
+sp_inside_braces = ignore # ignore/add/remove/force
-# Add or remove space between 'sizeof' and '('
-sp_sizeof_paren = ignore # ignore/add/remove/force
+# Add or remove space inside '{}'.
+sp_inside_braces_empty = ignore # ignore/add/remove/force
-# Add or remove space after the tag keyword (Pawn)
-sp_after_tag = ignore # ignore/add/remove/force
+# Add or remove space between return type and function name
+# A minimum of 1 is forced except for pointer return types.
+sp_type_func = ignore # ignore/add/remove/force
-# Add or remove space inside enum '{' and '}'
-sp_inside_braces_enum = ignore # ignore/add/remove/force
+# Add or remove space between type and open brace of an unnamed temporary direct-list-initialization.
+sp_type_brace_init_lst = ignore # ignore/add/remove/force
-# Add or remove space inside struct/union '{' and '}'
-sp_inside_braces_struct = ignore # ignore/add/remove/force
+# Add or remove space between function name and '(' on function declaration.
+sp_func_proto_paren = remove # ignore/add/remove/force
-# Add or remove space inside '{' and '}'
-sp_inside_braces = ignore # ignore/add/remove/force
+# Add or remove space between function name and '()' on function declaration without parameters.
+sp_func_proto_paren_empty = ignore # ignore/add/remove/force
-# Add or remove space inside '{}'
-sp_inside_braces_empty = ignore # ignore/add/remove/force
+# Add or remove space between function name and '(' on function definition.
+sp_func_def_paren = remove # ignore/add/remove/force
-# Add or remove space between return type and function name
-# A minimum of 1 is forced except for pointer return types.
-sp_type_func = ignore # ignore/add/remove/force
+# Add or remove space between function name and '()' on function definition without parameters.
+sp_func_def_paren_empty = ignore # ignore/add/remove/force
-# Add or remove space between function name and '(' on function declaration
-sp_func_proto_paren = remove # ignore/add/remove/force
+# Add or remove space inside empty function '()'.
+sp_inside_fparens = remove # ignore/add/remove/force
-# Add or remove space between function name and '(' on function definition
-sp_func_def_paren = remove # ignore/add/remove/force
+# Add or remove space inside function '(' and ')'.
+sp_inside_fparen = remove # ignore/add/remove/force
-# Add or remove space inside empty function '()'
-sp_inside_fparens = remove # ignore/add/remove/force
+# Add or remove space inside the first parens in the function type: 'void (*x)(...)'.
+sp_inside_tparen = ignore # ignore/add/remove/force
-# Add or remove space inside function '(' and ')'
-sp_inside_fparen = remove # ignore/add/remove/force
+# Add or remove between the parens in the function type: 'void (*x)(...)'.
+sp_after_tparen_close = ignore # ignore/add/remove/force
# Add or remove space between ']' and '(' when part of a function call.
-sp_square_fparen = remove # ignore/add/remove/force
+sp_square_fparen = remove # ignore/add/remove/force
+
+# Add or remove space between ')' and '{' of function.
+sp_fparen_brace = force # ignore/add/remove/force
-# Add or remove space between ')' and '{' of function
-sp_fparen_brace = force # ignore/add/remove/force
+# Java: Add or remove space between ')' and '{{' of double brace initializer.
+sp_fparen_dbrace = ignore # ignore/add/remove/force
-# Add or remove space between function name and '(' on function calls
-sp_func_call_paren = remove # ignore/add/remove/force
+# Add or remove space between function name and '(' on function calls.
+sp_func_call_paren = remove # ignore/add/remove/force
# Add or remove space between function name and '()' on function calls without parameters.
# If set to 'ignore' (the default), sp_func_call_paren is used.
-sp_func_call_paren_empty = ignore # ignore/add/remove/force
+sp_func_call_paren_empty = ignore # ignore/add/remove/force
# Add or remove space between the user function name and '(' on function calls
# You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
-sp_func_call_user_paren = ignore # ignore/add/remove/force
+sp_func_call_user_paren = ignore # ignore/add/remove/force
+
+# Add or remove space between a constructor/destructor and the open paren.
+sp_func_class_paren = ignore # ignore/add/remove/force
+
+# Add or remove space between a constructor without parameters or destructor and '()'.
+sp_func_class_paren_empty = ignore # ignore/add/remove/force
-# Add or remove space between a constructor/destructor and the open paren
-sp_func_class_paren = ignore # ignore/add/remove/force
+# Add or remove space between 'return' and '('.
+sp_return_paren = ignore # ignore/add/remove/force
-# Add or remove space between 'return' and '('
-sp_return_paren = ignore # ignore/add/remove/force
+# Add or remove space between '__attribute__' and '('.
+sp_attribute_paren = ignore # ignore/add/remove/force
-# Add or remove space between '__attribute__' and '('
-sp_attribute_paren = ignore # ignore/add/remove/force
+# Add or remove space between 'defined' and '(' in '#if defined (FOO)'.
+sp_defined_paren = ignore # ignore/add/remove/force
-# Add or remove space between 'defined' and '(' in '#if defined (FOO)'
-sp_defined_paren = ignore # ignore/add/remove/force
+# Add or remove space between 'throw' and '(' in 'throw (something)'.
+sp_throw_paren = ignore # ignore/add/remove/force
-# Add or remove space between 'throw' and '(' in 'throw (something)'
-sp_throw_paren = ignore # ignore/add/remove/force
+# Add or remove space between 'throw' and anything other than '(' as in '@throw [...];'.
+sp_after_throw = ignore # ignore/add/remove/force
# Add or remove space between 'catch' and '(' in 'catch (something) { }'
# If set to ignore, sp_before_sparen is used.
-sp_catch_paren = ignore # ignore/add/remove/force
+sp_catch_paren = ignore # ignore/add/remove/force
# Add or remove space between 'version' and '(' in 'version (something) { }' (D language)
# If set to ignore, sp_before_sparen is used.
-sp_version_paren = ignore # ignore/add/remove/force
+sp_version_paren = ignore # ignore/add/remove/force
# Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language)
# If set to ignore, sp_before_sparen is used.
-sp_scope_paren = ignore # ignore/add/remove/force
+sp_scope_paren = ignore # ignore/add/remove/force
+
+# Add or remove space between 'super' and '(' in 'super (something)'. Default=Remove.
+sp_super_paren = remove # ignore/add/remove/force
+
+# Add or remove space between 'this' and '(' in 'this (something)'. Default=Remove.
+sp_this_paren = remove # ignore/add/remove/force
+
+# Add or remove space between macro and value.
+sp_macro = ignore # ignore/add/remove/force
+
+# Add or remove space between macro function ')' and value.
+sp_macro_func = ignore # ignore/add/remove/force
-# Add or remove space between macro and value
-sp_macro = ignore # ignore/add/remove/force
+# Add or remove space between 'else' and '{' if on the same line.
+sp_else_brace = force # ignore/add/remove/force
-# Add or remove space between macro function ')' and value
-sp_macro_func = ignore # ignore/add/remove/force
+# Add or remove space between '}' and 'else' if on the same line.
+sp_brace_else = force # ignore/add/remove/force
-# Add or remove space between 'else' and '{' if on the same line
-sp_else_brace = force # ignore/add/remove/force
+# Add or remove space between '}' and the name of a typedef on the same line.
+sp_brace_typedef = ignore # ignore/add/remove/force
-# Add or remove space between '}' and 'else' if on the same line
-sp_brace_else = force # ignore/add/remove/force
+# Add or remove space between 'catch' and '{' if on the same line.
+sp_catch_brace = ignore # ignore/add/remove/force
-# Add or remove space between '}' and the name of a typedef on the same line
-sp_brace_typedef = ignore # ignore/add/remove/force
+# Add or remove space between '}' and 'catch' if on the same line.
+sp_brace_catch = ignore # ignore/add/remove/force
-# Add or remove space between 'catch' and '{' if on the same line
-sp_catch_brace = ignore # ignore/add/remove/force
+# Add or remove space between 'finally' and '{' if on the same line.
+sp_finally_brace = ignore # ignore/add/remove/force
-# Add or remove space between '}' and 'catch' if on the same line
-sp_brace_catch = ignore # ignore/add/remove/force
+# Add or remove space between '}' and 'finally' if on the same line.
+sp_brace_finally = ignore # ignore/add/remove/force
-# Add or remove space between 'finally' and '{' if on the same line
-sp_finally_brace = ignore # ignore/add/remove/force
+# Add or remove space between 'try' and '{' if on the same line.
+sp_try_brace = ignore # ignore/add/remove/force
-# Add or remove space between '}' and 'finally' if on the same line
-sp_brace_finally = ignore # ignore/add/remove/force
+# Add or remove space between get/set and '{' if on the same line.
+sp_getset_brace = ignore # ignore/add/remove/force
-# Add or remove space between 'try' and '{' if on the same line
-sp_try_brace = ignore # ignore/add/remove/force
+# Add or remove space between a variable and '{' for C++ uniform initialization. Default=Add.
+sp_word_brace = add # ignore/add/remove/force
-# Add or remove space between get/set and '{' if on the same line
-sp_getset_brace = ignore # ignore/add/remove/force
+# Add or remove space between a variable and '{' for a namespace. Default=Add.
+sp_word_brace_ns = add # ignore/add/remove/force
-# Add or remove space before the '::' operator
-sp_before_dc = ignore # ignore/add/remove/force
+# Add or remove space before the '::' operator.
+sp_before_dc = ignore # ignore/add/remove/force
-# Add or remove space after the '::' operator
-sp_after_dc = ignore # ignore/add/remove/force
+# Add or remove space after the '::' operator.
+sp_after_dc = ignore # ignore/add/remove/force
-# Add or remove around the D named array initializer ':' operator
-sp_d_array_colon = ignore # ignore/add/remove/force
+# Add or remove around the D named array initializer ':' operator.
+sp_d_array_colon = ignore # ignore/add/remove/force
-# Add or remove space after the '!' (not) operator. Default=Remove
-sp_not = remove # ignore/add/remove/force
+# Add or remove space after the '!' (not) operator. Default=Remove.
+sp_not = remove # ignore/add/remove/force
-# Add or remove space after the '~' (invert) operator. Default=Remove
-sp_inv = remove # ignore/add/remove/force
+# Add or remove space after the '~' (invert) operator. Default=Remove.
+sp_inv = remove # ignore/add/remove/force
# Add or remove space after the '&' (address-of) operator. Default=Remove
# This does not affect the spacing after a '&' that is part of a type.
-sp_addr = remove # ignore/add/remove/force
+sp_addr = remove # ignore/add/remove/force
-# Add or remove space around the '.' or '->' operators. Default=Remove
-sp_member = remove # ignore/add/remove/force
+# Add or remove space around the '.' or '->' operators. Default=Remove.
+sp_member = remove # ignore/add/remove/force
# Add or remove space after the '*' (dereference) operator. Default=Remove
# This does not affect the spacing after a '*' that is part of a type.
-sp_deref = remove # ignore/add/remove/force
+sp_deref = remove # ignore/add/remove/force
-# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove
-sp_sign = remove # ignore/add/remove/force
+# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove.
+sp_sign = remove # ignore/add/remove/force
-# Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove
-sp_incdec = remove # ignore/add/remove/force
+# Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove.
+sp_incdec = remove # ignore/add/remove/force
-# Add or remove space before a backslash-newline at the end of a line. Default=Add
-sp_before_nl_cont = add # ignore/add/remove/force
+# Add or remove space before a backslash-newline at the end of a line. Default=Add.
+sp_before_nl_cont = add # ignore/add/remove/force
-# Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;'
-sp_after_oc_scope = ignore # ignore/add/remove/force
+# Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;'.
+sp_after_oc_scope = ignore # ignore/add/remove/force
# Add or remove space after the colon in message specs
-# '-(int) f:(int) x;' vs '-(int) f: (int) x;'
-sp_after_oc_colon = ignore # ignore/add/remove/force
+# '-(int) f:(int) x;' vs '-(int) f: (int) x;'.
+sp_after_oc_colon = ignore # ignore/add/remove/force
# Add or remove space before the colon in message specs
-# '-(int) f: (int) x;' vs '-(int) f : (int) x;'
-sp_before_oc_colon = ignore # ignore/add/remove/force
+# '-(int) f: (int) x;' vs '-(int) f : (int) x;'.
+sp_before_oc_colon = ignore # ignore/add/remove/force
+
+# Add or remove space after the colon in immutable dictionary expression
+# 'NSDictionary *test = @{@"foo" :@"bar"};'.
+sp_after_oc_dict_colon = ignore # ignore/add/remove/force
+
+# Add or remove space before the colon in immutable dictionary expression
+# 'NSDictionary *test = @{@"foo" :@"bar"};'.
+sp_before_oc_dict_colon = ignore # ignore/add/remove/force
# Add or remove space after the colon in message specs
-# '[object setValue:1];' vs '[object setValue: 1];'
-sp_after_send_oc_colon = ignore # ignore/add/remove/force
+# '[object setValue:1];' vs '[object setValue: 1];'.
+sp_after_send_oc_colon = ignore # ignore/add/remove/force
# Add or remove space before the colon in message specs
-# '[object setValue:1];' vs '[object setValue :1];'
-sp_before_send_oc_colon = ignore # ignore/add/remove/force
+# '[object setValue:1];' vs '[object setValue :1];'.
+sp_before_send_oc_colon = ignore # ignore/add/remove/force
# Add or remove space after the (type) in message specs
-# '-(int)f: (int) x;' vs '-(int)f: (int)x;'
-sp_after_oc_type = ignore # ignore/add/remove/force
+# '-(int)f: (int) x;' vs '-(int)f: (int)x;'.
+sp_after_oc_type = ignore # ignore/add/remove/force
# Add or remove space after the first (type) in message specs
-# '-(int) f:(int)x;' vs '-(int)f:(int)x;'
-sp_after_oc_return_type = ignore # ignore/add/remove/force
+# '-(int) f:(int)x;' vs '-(int)f:(int)x;'.
+sp_after_oc_return_type = ignore # ignore/add/remove/force
# Add or remove space between '@selector' and '('
# '@selector(msgName)' vs '@selector (msgName)'
-# Also applies to @protocol() constructs
-sp_after_oc_at_sel = ignore # ignore/add/remove/force
+# Also applies to @protocol() constructs.
+sp_after_oc_at_sel = ignore # ignore/add/remove/force
# Add or remove space between '@selector(x)' and the following word
-# '@selector(foo) a:' vs '@selector(foo)a:'
-sp_after_oc_at_sel_parens = ignore # ignore/add/remove/force
+# '@selector(foo) a:' vs '@selector(foo)a:'.
+sp_after_oc_at_sel_parens = ignore # ignore/add/remove/force
# Add or remove space inside '@selector' parens
# '@selector(foo)' vs '@selector( foo )'
-# Also applies to @protocol() constructs
-sp_inside_oc_at_sel_parens = ignore # ignore/add/remove/force
+# Also applies to @protocol() constructs.
+sp_inside_oc_at_sel_parens = ignore # ignore/add/remove/force
# Add or remove space before a block pointer caret
-# '^int (int arg){...}' vs. ' ^int (int arg){...}'
-sp_before_oc_block_caret = ignore # ignore/add/remove/force
+# '^int (int arg){...}' vs. ' ^int (int arg){...}'.
+sp_before_oc_block_caret = ignore # ignore/add/remove/force
# Add or remove space after a block pointer caret
-# '^int (int arg){...}' vs. '^ int (int arg){...}'
-sp_after_oc_block_caret = ignore # ignore/add/remove/force
+# '^int (int arg){...}' vs. '^ int (int arg){...}'.
+sp_after_oc_block_caret = ignore # ignore/add/remove/force
-# Add or remove space around the ':' in 'b ? t : f'
-sp_cond_colon = ignore # ignore/add/remove/force
+# Add or remove space between the receiver and selector in a message.
+# '[receiver selector ...]'.
+sp_after_oc_msg_receiver = ignore # ignore/add/remove/force
-# Add or remove space around the '?' in 'b ? t : f'
-sp_cond_question = ignore # ignore/add/remove/force
+# Add or remove space after @property.
+sp_after_oc_property = ignore # ignore/add/remove/force
-# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here.
-sp_case_label = ignore # ignore/add/remove/force
+# Add or remove space around the ':' in 'b ? t : f'.
+sp_cond_colon = ignore # ignore/add/remove/force
-# Control the space around the D '..' operator.
-sp_range = ignore # ignore/add/remove/force
+# Add or remove space before the ':' in 'b ? t : f'. Overrides sp_cond_colon.
+sp_cond_colon_before = ignore # ignore/add/remove/force
-# Control the space after the opening of a C++ comment '// A' vs '//A'
-sp_cmt_cpp_start = ignore # ignore/add/remove/force
+# Add or remove space after the ':' in 'b ? t : f'. Overrides sp_cond_colon.
+sp_cond_colon_after = ignore # ignore/add/remove/force
-# Controls the spaces between #else or #endif and a trailing comment
-sp_endif_cmt = ignore # ignore/add/remove/force
+# Add or remove space around the '?' in 'b ? t : f'.
+sp_cond_question = ignore # ignore/add/remove/force
-# Controls the spaces after 'new', 'delete', and 'delete[]'
-sp_after_new = ignore # ignore/add/remove/force
+# Add or remove space before the '?' in 'b ? t : f'. Overrides sp_cond_question.
+sp_cond_question_before = ignore # ignore/add/remove/force
-# Controls the spaces before a trailing or embedded comment
-sp_before_tr_emb_cmt = ignore # ignore/add/remove/force
+# Add or remove space after the '?' in 'b ? t : f'. Overrides sp_cond_question.
+sp_cond_question_after = ignore # ignore/add/remove/force
-# Number of spaces before a trailing or embedded comment
-sp_num_before_tr_emb_cmt = 0 # number
+# In the abbreviated ternary form (a ?: b), add/remove space between ? and :.'. Overrides all other sp_cond_* options.
+sp_cond_ternary_short = ignore # ignore/add/remove/force
-#
-# Code alignment (not left column spaces/tabs)
-#
+# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here.
+sp_case_label = ignore # ignore/add/remove/force
-# Whether to keep non-indenting tabs
-align_keep_tabs = false # false/true
+# Control the space around the D '..' operator.
+sp_range = ignore # ignore/add/remove/force
-# Whether to use tabs for aligning
-align_with_tabs = false # false/true
+# Control the spacing after ':' in 'for (TYPE VAR : EXPR)'. Only JAVA.
+sp_after_for_colon = ignore # ignore/add/remove/force
-# Whether to bump out to the next tab when aligning
-align_on_tabstop = false # false/true
+# Control the spacing before ':' in 'for (TYPE VAR : EXPR)'. Only JAVA.
+sp_before_for_colon = ignore # ignore/add/remove/force
-# Whether to left-align numbers
-align_number_left = false # false/true
+# Control the spacing in 'extern (C)' (D).
+sp_extern_paren = ignore # ignore/add/remove/force
-# Align variable definitions in prototypes and functions
-align_func_params = false # false/true
+# Control the space after the opening of a C++ comment '// A' vs '//A'.
+sp_cmt_cpp_start = ignore # ignore/add/remove/force
-# Align parameters in single-line functions that have the same name.
-# The function names must already be aligned with each other.
-align_same_func_call_params = false # false/true
+# True: If space is added with sp_cmt_cpp_start, do it after doxygen sequences like '///', '///<', '//!' and '//!<'.
+sp_cmt_cpp_doxygen = false # false/true
-# The span for aligning variable definitions (0=don't align)
-align_var_def_span = 0 # number
+# True: If space is added with sp_cmt_cpp_start, do it after Qt translator or meta-data comments like '//:', '//=', and '//~'.
+sp_cmt_cpp_qttr = false # false/true
-# How to align the star in variable definitions.
-# 0=Part of the type 'void * foo;'
-# 1=Part of the variable 'void *foo;'
-# 2=Dangling 'void *foo;'
-align_var_def_star_style = 0 # number
+# Controls the spaces between #else or #endif and a trailing comment.
+sp_endif_cmt = ignore # ignore/add/remove/force
-# How to align the '&' in variable definitions.
-# 0=Part of the type
-# 1=Part of the variable
-# 2=Dangling
-align_var_def_amp_style = 0 # number
+# Controls the spaces after 'new', 'delete' and 'delete[]'.
+sp_after_new = ignore # ignore/add/remove/force
-# The threshold for aligning variable definitions (0=no limit)
-align_var_def_thresh = 0 # number
+# Controls the spaces between new and '(' in 'new()'.
+sp_between_new_paren = ignore # ignore/add/remove/force
-# The gap for aligning variable definitions
-align_var_def_gap = 0 # number
+# Controls the spaces between ')' and 'type' in 'new(foo) BAR'.
+sp_after_newop_paren = ignore # ignore/add/remove/force
-# Whether to align the colon in struct bit fields
-align_var_def_colon = false # false/true
+# Controls the spaces inside paren of the new operator: 'new(foo) BAR'.
+sp_inside_newop_paren = ignore # ignore/add/remove/force
-# Whether to align any attribute after the variable name
-align_var_def_attribute = false # false/true
+# Controls the space after open paren of the new operator: 'new(foo) BAR'.
+# Overrides sp_inside_newop_paren.
+sp_inside_newop_paren_open = ignore # ignore/add/remove/force
-# Whether to align inline struct/enum/union variable definitions
-align_var_def_inline = false # false/true
+# Controls the space before close paren of the new operator: 'new(foo) BAR'.
+# Overrides sp_inside_newop_paren.
+sp_inside_newop_paren_close = ignore # ignore/add/remove/force
-# The span for aligning on '=' in assignments (0=don't align)
-align_assign_span = 0 # number
+# Controls the spaces before a trailing or embedded comment.
+sp_before_tr_emb_cmt = ignore # ignore/add/remove/force
-# The threshold for aligning on '=' in assignments (0=no limit)
-align_assign_thresh = 0 # number
+# Number of spaces before a trailing or embedded comment.
+sp_num_before_tr_emb_cmt = 0 # unsigned number
-# The span for aligning on '=' in enums (0=don't align)
-align_enum_equ_span = 0 # number
+# Control space between a Java annotation and the open paren.
+sp_annotation_paren = ignore # ignore/add/remove/force
-# The threshold for aligning on '=' in enums (0=no limit)
-align_enum_equ_thresh = 0 # number
+# If True, vbrace tokens are dropped to the previous token and skipped.
+sp_skip_vbrace_tokens = false # false/true
-# The span for aligning struct/union (0=don't align)
-align_var_struct_span = 0 # number
+# If True, a <TAB> is inserted after #define.
+force_tab_after_define = false # false/true
-# The threshold for aligning struct/union member definitions (0=no limit)
-align_var_struct_thresh = 0 # number
+#
+# Indenting
+#
-# The gap for aligning struct/union member definitions
-align_var_struct_gap = 0 # number
+# The number of columns to indent per level.
+# Usually 2, 3, 4, or 8. Default=8.
+indent_columns = 2 # unsigned number
-# The span for aligning struct initializer values (0=don't align)
-align_struct_init_span = 0 # number
+# The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
+# For FreeBSD, this is set to 4. Negative value is absolute and not increased for each '(' level.
+indent_continue = 0 # number
-# The minimum space between the type and the synonym of a typedef
-align_typedef_gap = 0 # number
+# The continuation indent for func_*_param if they are true.
+# If non-zero, this overrides the indent.
+indent_param = 0 # unsigned number
-# The span for aligning single-line typedefs (0=don't align)
-align_typedef_span = 0 # number
+# How to use tabs when indenting code
+# 0=spaces only
+# 1=indent with tabs to brace level, align with spaces (default)
+# 2=indent and align with tabs, using spaces when not on a tabstop
+indent_with_tabs = 1 # unsigned number
-# How to align typedef'd functions with other typedefs
-# 0: Don't mix them at all
-# 1: align the open paren with the types
-# 2: align the function type name with the other type names
-align_typedef_func = 0 # number
+# Comments that are not a brace level are indented with tabs on a tabstop.
+# Requires indent_with_tabs=2. If false, will use spaces.
+indent_cmt_with_tabs = false # false/true
-# Controls the positioning of the '*' in typedefs. Just try it.
-# 0: Align on typedef type, ignore '*'
-# 1: The '*' is part of type name: typedef int *pint;
-# 2: The '*' is part of the type, but dangling: typedef int *pint;
-align_typedef_star_style = 0 # number
+# Whether to indent strings broken by '\' so that they line up.
+indent_align_string = false # false/true
-# Controls the positioning of the '&' in typedefs. Just try it.
-# 0: Align on typedef type, ignore '&'
-# 1: The '&' is part of type name: typedef int &pint;
-# 2: The '&' is part of the type, but dangling: typedef int &pint;
-align_typedef_amp_style = 0 # number
+# The number of spaces to indent multi-line XML strings.
+# Requires indent_align_string=True.
+indent_xml_string = 0 # unsigned number
-# The span for aligning comments that end lines (0=don't align)
-align_right_cmt_span = 0 # number
+# Spaces to indent '{' from level.
+indent_brace = 0 # unsigned number
-# If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment
-align_right_cmt_mix = false # false/true
+# Whether braces are indented to the body level.
+indent_braces = false # false/true
-# If a trailing comment is more than this number of columns away from the text it follows,
-# it will qualify for being aligned. This has to be > 0 to do anything.
-align_right_cmt_gap = 0 # number
+# Disabled indenting function braces if indent_braces is True.
+indent_braces_no_func = false # false/true
-# Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore)
-align_right_cmt_at_col = 0 # number
+# Disabled indenting class braces if indent_braces is True.
+indent_braces_no_class = false # false/true
-# The span for aligning function prototypes (0=don't align)
-align_func_proto_span = 0 # number
+# Disabled indenting struct braces if indent_braces is True.
+indent_braces_no_struct = false # false/true
-# Minimum gap between the return type and the function name.
-align_func_proto_gap = 0 # number
+# Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.
+indent_brace_parent = false # false/true
-# Align function protos on the 'operator' keyword instead of what follows
-align_on_operator = false # false/true
+# Indent based on the paren open instead of the brace open in '({\n', default is to indent by brace.
+indent_paren_open_brace = false # false/true
-# Whether to mix aligning prototype and variable declarations.
-# If true, align_var_def_XXX options are used instead of align_func_proto_XXX options.
-align_mix_var_proto = false # false/true
+# indent a C# delegate by another level, default is to not indent by another level.
+indent_cs_delegate_brace = false # false/true
-# Align single-line functions with function prototypes, uses align_func_proto_span
-align_single_line_func = false # false/true
+# Whether the 'namespace' body is indented.
+indent_namespace = false # false/true
-# Aligning the open brace of single-line functions.
-# Requires align_single_line_func=true, uses align_func_proto_span
-align_single_line_brace = false # false/true
+# Only indent one namespace and no sub-namespaces.
+# Requires indent_namespace=True.
+indent_namespace_single_indent = false # false/true
-# Gap for align_single_line_brace.
-align_single_line_brace_gap = 0 # number
+# The number of spaces to indent a namespace block.
+indent_namespace_level = 0 # unsigned number
-# The span for aligning ObjC msg spec (0=don't align)
-align_oc_msg_spec_span = 0 # number
+# If the body of the namespace is longer than this number, it won't be indented.
+# Requires indent_namespace=True. Default=0 (no limit)
+indent_namespace_limit = 0 # unsigned number
-# Whether to align macros wrapped with a backslash and a newline.
-# This will not work right if the macro contains a multi-line comment.
-align_nl_cont = false # false/true
+# Whether the 'extern "C"' body is indented.
+indent_extern = false # false/true
-# The minimum space between label and value of a preprocessor define
-align_pp_define_gap = 0 # number
+# Whether the 'class' body is indented.
+indent_class = false # false/true
-# The span for aligning on '#define' bodies (0=don't align)
-align_pp_define_span = 0 # number
+# Whether to indent the stuff after a leading base class colon.
+indent_class_colon = false # false/true
-# Align lines that start with '<<' with previous '<<'. Default=true
-align_left_shift = true # false/true
+# Indent based on a class colon instead of the stuff after the colon.
+# Requires indent_class_colon=True. Default=False.
+indent_class_on_colon = false # false/true
-# Span for aligning parameters in an Obj-C message call on the ':' (0=don't align)
-align_oc_msg_colon_span = 0 # number
+# Whether to indent the stuff after a leading class initializer colon.
+indent_constr_colon = false # false/true
-# Aligning parameters in an Obj-C '+' or '-' declaration on the ':'
-align_oc_decl_colon = false # false/true
+# Virtual indent from the ':' for member initializers. Default=2.
+indent_ctor_init_leading = 2 # unsigned number
-#
-# Newline adding and removing options
-#
+# Additional indent for constructor initializer list.
+# Negative values decrease indent down to the first column. Default=0.
+indent_ctor_init = 0 # number
-# Whether to collapse empty blocks between '{' and '}'
-nl_collapse_empty_body = false # false/true
+# False=treat 'else\nif' as 'else if' for indenting purposes
+# True=indent the 'if' one level.
+indent_else_if = false # false/true
-# Don't split one-line braced assignments - 'foo_t f = { 1, 2 };'
-nl_assign_leave_one_liners = false # false/true
+# Amount to indent variable declarations after a open brace. neg=relative, pos=absolute.
+indent_var_def_blk = 0 # number
-# Don't split one-line braced statements inside a class xx { } body
-nl_class_leave_one_liners = false # false/true
+# Indent continued variable declarations instead of aligning.
+indent_var_def_cont = false # false/true
-# Don't split one-line enums: 'enum foo { BAR = 15 };'
-nl_enum_leave_one_liners = false # false/true
+# Indent continued shift expressions ('<<' and '>>') instead of aligning.
+# Turn align_left_shift off when enabling this.
+indent_shift = false # false/true
-# Don't split one-line get or set functions
-nl_getset_leave_one_liners = false # false/true
+# True: force indentation of function definition to start in column 1
+# False: use the default behavior.
+indent_func_def_force_col1 = false # false/true
-# Don't split one-line function definitions - 'int foo() { return 0; }'
-nl_func_leave_one_liners = false # false/true
+# True: indent continued function call parameters one indent level
+# False: align parameters under the open paren.
+indent_func_call_param = false # false/true
-# Don't split one-line if/else statements - 'if(a) b++;'
-nl_if_leave_one_liners = false # false/true
+# Same as indent_func_call_param, but for function defs.
+indent_func_def_param = false # false/true
-# Add or remove newlines at the start of the file
-nl_start_of_file = ignore # ignore/add/remove/force
+# Same as indent_func_call_param, but for function protos.
+indent_func_proto_param = false # false/true
-# The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'
-nl_start_of_file_min = 0 # number
+# Same as indent_func_call_param, but for class declarations.
+indent_func_class_param = false # false/true
-# Add or remove newline at the end of the file
-nl_end_of_file = ignore # ignore/add/remove/force
+# Same as indent_func_call_param, but for class variable constructors.
+indent_func_ctor_var_param = false # false/true
-# The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force')
-nl_end_of_file_min = 0 # number
+# Same as indent_func_call_param, but for templates.
+indent_template_param = false # false/true
-# Add or remove newline between '=' and '{'
-nl_assign_brace = ignore # ignore/add/remove/force
+# Double the indent for indent_func_xxx_param options.
+# Use both values of the options indent_columns and indent_param.
+indent_func_param_double = false # false/true
-# Add or remove newline between '=' and '[' (D only)
-nl_assign_square = ignore # ignore/add/remove/force
+# Indentation column for standalone 'const' function decl/proto qualifier.
+indent_func_const = 0 # unsigned number
-# Add or remove newline after '= [' (D only). Will also affect the newline before the ']'
-nl_after_square_assign = ignore # ignore/add/remove/force
+# Indentation column for standalone 'throw' function decl/proto qualifier.
+indent_func_throw = 0 # unsigned number
-# The number of blank lines after a block of variable definitions at the top of a function body.
-# 0=no change (default)
-nl_func_var_def_blk = 0 # number
+# The number of spaces to indent a continued '->' or '.'
+# Usually set to 0, 1, or indent_columns.
+indent_member = 0 # unsigned number
-# Add or remove newline between a function call's ')' and '{', as in:
-# list_for_each(item, &list) { }
-nl_fcall_brace = ignore # ignore/add/remove/force
+# Spaces to indent single line ('//') comments on lines before code.
+indent_sing_line_comments = 0 # unsigned number
-# Add or remove newline between 'enum' and '{'
-nl_enum_brace = remove # ignore/add/remove/force
+# If set, will indent trailing single line ('//') comments relative
+# to the code instead of trying to keep the same absolute column.
+indent_relative_single_line_comments = false # false/true
-# Add or remove newline between 'struct and '{'
-nl_struct_brace = ignore # ignore/add/remove/force
+# Spaces to indent 'case' from 'switch'
+# Usually 0 or indent_columns.
+indent_switch_case = 0 # unsigned number
-# Add or remove newline between 'union' and '{'
-nl_union_brace = remove # ignore/add/remove/force
+# Whether to indent preproccesor statements inside of switch statements.
+indent_switch_pp = true # false/true
-# Add or remove newline between 'if' and '{'
-nl_if_brace = remove # ignore/add/remove/force
+# Spaces to shift the 'case' line, without affecting any other lines
+# Usually 0.
+indent_case_shift = 0 # unsigned number
-# Add or remove newline between '}' and 'else'
-nl_brace_else = remove # ignore/add/remove/force
+# Spaces to indent '{' from 'case'.
+# By default, the brace will appear under the 'c' in case.
+# Usually set to 0 or indent_columns.
+# negative value are OK.
+indent_case_brace = 0 # number
-# Add or remove newline between 'else if' and '{'
-# If set to ignore, nl_if_brace is used instead
-nl_elseif_brace = remove # ignore/add/remove/force
+# Whether to indent comments found in first column.
+indent_col1_comment = false # false/true
-# Add or remove newline between 'else' and '{'
-nl_else_brace = remove # ignore/add/remove/force
+# How to indent goto labels
+# >0: absolute column where 1 is the leftmost column
+# <=0: subtract from brace indent
+# Default=1
+indent_label = 1 # number
-# Add or remove newline between 'else' and 'if'
-nl_else_if = remove # ignore/add/remove/force
+# Same as indent_label, but for access specifiers that are followed by a colon. Default=1
+indent_access_spec = 1 # number
-# Add or remove newline between '}' and 'finally'
-nl_brace_finally = ignore # ignore/add/remove/force
+# Indent the code after an access specifier by one level.
+# If set, this option forces 'indent_access_spec=0'.
+indent_access_spec_body = false # false/true
-# Add or remove newline between 'finally' and '{'
-nl_finally_brace = ignore # ignore/add/remove/force
+# If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended).
+indent_paren_nl = false # false/true
-# Add or remove newline between 'try' and '{'
-nl_try_brace = ignore # ignore/add/remove/force
+# Controls the indent of a close paren after a newline.
+# 0: Indent to body level
+# 1: Align under the open paren
+# 2: Indent to the brace level
+indent_paren_close = 0 # unsigned number
-# Add or remove newline between get/set and '{'
-nl_getset_brace = ignore # ignore/add/remove/force
+# Controls the indent of the open paren of a function definition, if on it's own line.If True, indents the open paren
+indent_paren_after_func_def = false # false/true
-# Add or remove newline between 'for' and '{'
-nl_for_brace = ignore # ignore/add/remove/force
+# Controls the indent of the open paren of a function declaration, if on it's own line.If True, indents the open paren
+indent_paren_after_func_decl = false # false/true
-# Add or remove newline between 'catch' and '{'
-nl_catch_brace = ignore # ignore/add/remove/force
+# Controls the indent of the open paren of a function call, if on it's own line.If True, indents the open paren
+indent_paren_after_func_call = false # false/true
-# Add or remove newline between '}' and 'catch'
-nl_brace_catch = ignore # ignore/add/remove/force
+# Controls the indent of a comma when inside a paren.If True, aligns under the open paren.
+indent_comma_paren = false # false/true
-# Add or remove newline between 'while' and '{'
-nl_while_brace = ignore # ignore/add/remove/force
+# Controls the indent of a BOOL operator when inside a paren.If True, aligns under the open paren.
+indent_bool_paren = false # false/true
-# Add or remove newline between 'using' and '{'
-nl_using_brace = ignore # ignore/add/remove/force
+# If 'indent_bool_paren' is True, controls the indent of the first expression. If True, aligns the first expression to the following ones.
+indent_first_bool_expr = false # false/true
-# Add or remove newline between two open or close braces.
-# Due to general newline/brace handling, REMOVE may not work.
-nl_brace_brace = ignore # ignore/add/remove/force
+# If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended).
+indent_square_nl = false # false/true
-# Add or remove newline between 'do' and '{'
-nl_do_brace = ignore # ignore/add/remove/force
+# Don't change the relative indent of ESQL/C 'EXEC SQL' bodies.
+indent_preserve_sql = false # false/true
-# Add or remove newline between '}' and 'while' of 'do' statement
-nl_brace_while = ignore # ignore/add/remove/force
+# Align continued statements at the '='. Default=True
+# If False or the '=' is followed by a newline, the next line is indent one tab.
+indent_align_assign = true # false/true
-# Add or remove newline between 'switch' and '{'
-nl_switch_brace = ignore # ignore/add/remove/force
+# Indent OC blocks at brace level instead of usual rules.
+indent_oc_block = false # false/true
-# Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc.
-# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch, and nl_catch_brace.
-nl_multi_line_cond = false # false/true
+# Indent OC blocks in a message relative to the parameter name.
+# 0=use indent_oc_block rules, 1+=spaces to indent
+indent_oc_block_msg = 0 # unsigned number
-# Force a newline in a define after the macro name for multi-line defines.
-nl_multi_line_define = false # false/true
+# Minimum indent for subsequent parameters
+indent_oc_msg_colon = 0 # unsigned number
-# Whether to put a newline before 'case' statement
-nl_before_case = false # false/true
+# If True, prioritize aligning with initial colon (and stripping spaces from lines, if necessary).
+# Default=True.
+indent_oc_msg_prioritize_first_colon = true # false/true
-# Add or remove newline between ')' and 'throw'
-nl_before_throw = ignore # ignore/add/remove/force
+# If indent_oc_block_msg and this option are on, blocks will be indented the way that Xcode does by default (from keyword if the parameter is on its own line; otherwise, from the previous indentation level).
+indent_oc_block_msg_xcode_style = false # false/true
-# Whether to put a newline after 'case' statement
-nl_after_case = false # false/true
+# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg keyword.
+indent_oc_block_msg_from_keyword = false # false/true
-# Add or remove a newline between a case ':' and '{'. Overrides nl_after_case.
-nl_case_colon_brace = ignore # ignore/add/remove/force
+# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is relative to a msg colon.
+indent_oc_block_msg_from_colon = false # false/true
-# Newline between namespace and {
-nl_namespace_brace = ignore # ignore/add/remove/force
+# If indent_oc_block_msg and this option are on, blocks will be indented from where the block caret is.
+indent_oc_block_msg_from_caret = false # false/true
-# Add or remove newline between 'template<>' and whatever follows.
-nl_template_class = ignore # ignore/add/remove/force
+# If indent_oc_block_msg and this option are on, blocks will be indented from where the brace is.
+indent_oc_block_msg_from_brace = false # false/true
-# Add or remove newline between 'class' and '{'
-nl_class_brace = ignore # ignore/add/remove/force
+# When identing after virtual brace open and newline add further spaces to reach this min. indent.
+indent_min_vbrace_open = 0 # unsigned number
-# Add or remove newline after each ',' in the constructor member initialization
-nl_class_init_args = ignore # ignore/add/remove/force
+# True: When identing after virtual brace open and newline add further spaces after regular indent to reach next tabstop.
+indent_vbrace_open_on_tabstop = false # false/true
-# Add or remove newline between return type and function name in a function definition
-nl_func_type_name = ignore # ignore/add/remove/force
+# If True, a brace followed by another token (not a newline) will indent all contained lines to match the token.Default=True.
+indent_token_after_brace = true # false/true
-# Add or remove newline between return type and function name inside a class {}
-# Uses nl_func_type_name or nl_func_proto_type_name if set to ignore.
-nl_func_type_name_class = ignore # ignore/add/remove/force
+# If True, cpp lambda body will be indentedDefault=False.
+indent_cpp_lambda_body = false # false/true
-# Add or remove newline between function scope and name in a definition
-# Controls the newline after '::' in 'void A::f() { }'
-nl_func_scope_name = ignore # ignore/add/remove/force
+# indent (or not) an using block if no braces are used. Only for C#.Default=True.
+indent_using_block = true # false/true
-# Add or remove newline between return type and function name in a prototype
-nl_func_proto_type_name = ignore # ignore/add/remove/force
+# indent the continuation of ternary operator.
+# 0: (Default) off
+# 1: When the `if_false` is a continuation, indent it under `if_false`
+# 2: When the `:` is a continuation, indent it under `?`
+indent_ternary_operator = 0 # unsigned number
-# Add or remove newline between a function name and the opening '('
-nl_func_paren = ignore # ignore/add/remove/force
+# If true, ignore indent and align for asm blocks as they have their own indentation.
+indent_ignore_asm_block = false # false/true
-# Add or remove newline between a function name and the opening '(' in the definition
-nl_func_def_paren = ignore # ignore/add/remove/force
+#
+# Newline adding and removing options
+#
-# Add or remove newline after '(' in a function declaration
-nl_func_decl_start = ignore # ignore/add/remove/force
+# Whether to collapse empty blocks between '{' and '}'.
+nl_collapse_empty_body = false # false/true
-# Add or remove newline after '(' in a function definition
-nl_func_def_start = ignore # ignore/add/remove/force
+# Don't split one-line braced assignments - 'foo_t f = { 1, 2 };'.
+nl_assign_leave_one_liners = false # false/true
-# Overrides nl_func_decl_start when there is only one parameter.
-nl_func_decl_start_single = ignore # ignore/add/remove/force
+# Don't split one-line braced statements inside a class xx { } body.
+nl_class_leave_one_liners = false # false/true
-# Overrides nl_func_def_start when there is only one parameter.
-nl_func_def_start_single = ignore # ignore/add/remove/force
+# Don't split one-line enums: 'enum foo { BAR = 15 };'
+nl_enum_leave_one_liners = false # false/true
-# Add or remove newline after each ',' in a function declaration
-nl_func_decl_args = ignore # ignore/add/remove/force
+# Don't split one-line get or set functions.
+nl_getset_leave_one_liners = false # false/true
-# Add or remove newline after each ',' in a function definition
-nl_func_def_args = ignore # ignore/add/remove/force
+# Don't split one-line function definitions - 'int foo() { return 0; }'.
+nl_func_leave_one_liners = false # false/true
-# Add or remove newline before the ')' in a function declaration
-nl_func_decl_end = ignore # ignore/add/remove/force
+# Don't split one-line C++11 lambdas - '[]() { return 0; }'.
+nl_cpp_lambda_leave_one_liners = false # false/true
-# Add or remove newline before the ')' in a function definition
-nl_func_def_end = ignore # ignore/add/remove/force
+# Don't split one-line if/else statements - 'if(a) b++;'.
+nl_if_leave_one_liners = false # false/true
-# Overrides nl_func_decl_end when there is only one parameter.
-nl_func_decl_end_single = ignore # ignore/add/remove/force
+# Don't split one-line while statements - 'while(a) b++;'.
+nl_while_leave_one_liners = false # false/true
-# Overrides nl_func_def_end when there is only one parameter.
-nl_func_def_end_single = ignore # ignore/add/remove/force
+# Don't split one-line OC messages.
+nl_oc_msg_leave_one_liner = false # false/true
-# Add or remove newline between '()' in a function declaration.
-nl_func_decl_empty = ignore # ignore/add/remove/force
+# Add or remove newline between Objective-C block signature and '{'.
+nl_oc_block_brace = ignore # ignore/add/remove/force
-# Add or remove newline between '()' in a function definition.
-nl_func_def_empty = ignore # ignore/add/remove/force
+# Add or remove newlines at the start of the file.
+nl_start_of_file = ignore # ignore/add/remove/force
-# Add or remove newline between function signature and '{'
-nl_fdef_brace = ignore # ignore/add/remove/force
+# The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'.
+nl_start_of_file_min = 0 # unsigned number
-# Whether to put a newline after 'return' statement
-nl_after_return = false # false/true
+# Add or remove newline at the end of the file.
+nl_end_of_file = ignore # ignore/add/remove/force
-# Add or remove a newline between the return keyword and return expression.
-nl_return_expr = ignore # ignore/add/remove/force
+# The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force').
+nl_end_of_file_min = 0 # unsigned number
-# Whether to put a newline after semicolons, except in 'for' statements
-nl_after_semicolon = false # false/true
+# Add or remove newline between '=' and '{'.
+nl_assign_brace = ignore # ignore/add/remove/force
-# Whether to put a newline after brace open.
-# This also adds a newline before the matching brace close.
-nl_after_brace_open = false # false/true
+# Add or remove newline between '=' and '[' (D only).
+nl_assign_square = ignore # ignore/add/remove/force
-# If nl_after_brace_open and nl_after_brace_open_cmt are true, a newline is
-# placed between the open brace and a trailing single-line comment.
-nl_after_brace_open_cmt = false # false/true
+# Add or remove newline after '= [' (D only). Will also affect the newline before the ']'.
+nl_after_square_assign = ignore # ignore/add/remove/force
-# Whether to put a newline after a virtual brace open with a non-empty body.
-# These occur in un-braced if/while/do/for statement bodies.
-nl_after_vbrace_open = false # false/true
+# The number of blank lines after a block of variable definitions at the top of a function body
+# 0 = No change (default).
+nl_func_var_def_blk = 0 # unsigned number
-# Whether to put a newline after a virtual brace open with an empty body.
-# These occur in un-braced if/while/do/for statement bodies.
-nl_after_vbrace_open_empty = false # false/true
+# The number of newlines before a block of typedefs
+# 0 = No change (default)
+# is overridden by the option 'nl_after_access_spec'.
+nl_typedef_blk_start = 0 # unsigned number
-# Whether to put a newline after a brace close.
-# Does not apply if followed by a necessary ';'.
-nl_after_brace_close = false # false/true
+# The number of newlines after a block of typedefs
+# 0 = No change (default).
+nl_typedef_blk_end = 0 # unsigned number
-# Whether to put a newline after a virtual brace close.
-# Would add a newline before return in: 'if (foo) a++; return;'
-nl_after_vbrace_close = false # false/true
+# The maximum consecutive newlines within a block of typedefs
+# 0 = No change (default).
+nl_typedef_blk_in = 0 # unsigned number
-# Whether to alter newlines in '#define' macros
-nl_define_macro = false # false/true
+# The number of newlines before a block of variable definitions not at the top of a function body
+# 0 = No change (default)
+# is overridden by the option 'nl_after_access_spec'.
+nl_var_def_blk_start = 0 # unsigned number
-# Whether to not put blanks after '#ifxx', '#elxx', or before '#endif'
-nl_squeeze_ifdef = false # false/true
+# The number of newlines after a block of variable definitions not at the top of a function body
+# 0 = No change (default).
+nl_var_def_blk_end = 0 # unsigned number
-# Add or remove blank line before 'if'
-nl_before_if = ignore # ignore/add/remove/force
+# The maximum consecutive newlines within a block of variable definitions
+# 0 = No change (default).
+nl_var_def_blk_in = 0 # unsigned number
-# Add or remove blank line after 'if' statement
-nl_after_if = ignore # ignore/add/remove/force
+# Add or remove newline between a function call's ')' and '{', as in:
+# list_for_each(item, &list) { }.
+nl_fcall_brace = ignore # ignore/add/remove/force
-# Add or remove blank line before 'for'
-nl_before_for = ignore # ignore/add/remove/force
+# Add or remove newline between 'enum' and '{'.
+nl_enum_brace = remove # ignore/add/remove/force
-# Add or remove blank line after 'for' statement
-nl_after_for = ignore # ignore/add/remove/force
+# Add or remove newline between 'enum' and 'class'.
+nl_enum_class = ignore # ignore/add/remove/force
-# Add or remove blank line before 'while'
-nl_before_while = ignore # ignore/add/remove/force
+# Add or remove newline between 'enum class' and the identifier.
+nl_enum_class_identifier = ignore # ignore/add/remove/force
-# Add or remove blank line after 'while' statement
-nl_after_while = ignore # ignore/add/remove/force
+# Add or remove newline between 'enum class' type and ':'.
+nl_enum_identifier_colon = ignore # ignore/add/remove/force
-# Add or remove blank line before 'switch'
-nl_before_switch = ignore # ignore/add/remove/force
+# Add or remove newline between 'enum class identifier :' and 'type' and/or 'type'.
+nl_enum_colon_type = ignore # ignore/add/remove/force
-# Add or remove blank line after 'switch' statement
-nl_after_switch = ignore # ignore/add/remove/force
+# Add or remove newline between 'struct and '{'.
+nl_struct_brace = ignore # ignore/add/remove/force
-# Add or remove blank line before 'do'
-nl_before_do = ignore # ignore/add/remove/force
+# Add or remove newline between 'union' and '{'.
+nl_union_brace = remove # ignore/add/remove/force
-# Add or remove blank line after 'do/while' statement
-nl_after_do = ignore # ignore/add/remove/force
+# Add or remove newline between 'if' and '{'.
+nl_if_brace = remove # ignore/add/remove/force
-# Whether to double-space commented-entries in struct/enum
-nl_ds_struct_enum_cmt = false # false/true
+# Add or remove newline between '}' and 'else'.
+nl_brace_else = remove # ignore/add/remove/force
-# Whether to double-space before the close brace of a struct/union/enum
-# (lower priority than 'eat_blanks_before_close_brace')
-nl_ds_struct_enum_close_brace = false # false/true
+# Add or remove newline between 'else if' and '{'
+# If set to ignore, nl_if_brace is used instead.
+nl_elseif_brace = remove # ignore/add/remove/force
-# Add or remove a newline around a class colon.
-# Related to pos_class_colon, nl_class_init_args, and pos_comma.
-nl_class_colon = ignore # ignore/add/remove/force
+# Add or remove newline between 'else' and '{'.
+nl_else_brace = remove # ignore/add/remove/force
-# Change simple unbraced if statements into an one-liner
-# 'if(b)\n i++;' => 'if(b) i++;'
-nl_create_if_one_liner = false # false/true
+# Add or remove newline between 'else' and 'if'.
+nl_else_if = remove # ignore/add/remove/force
-# Change simple unbraced for statements into an one-liner
-# 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'
-nl_create_for_one_liner = false # false/true
+# Add or remove newline before 'if'/'else if' closing parenthesis.
+nl_before_if_closing_paren = ignore # ignore/add/remove/force
-# Change simple unbraced while statements into an one-liner
-# 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'
-nl_create_while_one_liner = false # false/true
+# Add or remove newline between '}' and 'finally'.
+nl_brace_finally = ignore # ignore/add/remove/force
-#
-# Positioning options
-#
+# Add or remove newline between 'finally' and '{'.
+nl_finally_brace = ignore # ignore/add/remove/force
-# The position of arithmetic operators in wrapped expressions
-pos_arith = ignore # ignore/lead/lead_break/lead_force/trail/trail_break/trail_force
+# Add or remove newline between 'try' and '{'.
+nl_try_brace = ignore # ignore/add/remove/force
-# The position of assignment in wrapped expressions.
-# Do not affect '=' followed by '{'
-pos_assign = ignore # ignore/lead/lead_break/lead_force/trail/trail_break/trail_force
+# Add or remove newline between get/set and '{'.
+nl_getset_brace = ignore # ignore/add/remove/force
-# The position of boolean operators in wrapped expressions
-pos_bool = ignore # ignore/lead/lead_break/lead_force/trail/trail_break/trail_force
+# Add or remove newline between 'for' and '{'.
+nl_for_brace = ignore # ignore/add/remove/force
-# The position of comparison operators in wrapped expressions
-pos_compare = ignore # ignore/lead/lead_break/lead_force/trail/trail_break/trail_force
+# Add or remove newline between 'catch' and '{'.
+nl_catch_brace = ignore # ignore/add/remove/force
-# The position of conditional (b ? t : f) operators in wrapped expressions
-pos_conditional = ignore # ignore/lead/lead_break/lead_force/trail/trail_break/trail_force
+# Add or remove newline between '}' and 'catch'.
+nl_brace_catch = ignore # ignore/add/remove/force
-# The position of the comma in wrapped expressions
-pos_comma = ignore # ignore/lead/lead_break/lead_force/trail/trail_break/trail_force
+# Add or remove newline between '}' and ']'.
+nl_brace_square = ignore # ignore/add/remove/force
-# The position of the comma in the constructor initialization list
-pos_class_comma = ignore # ignore/lead/lead_break/lead_force/trail/trail_break/trail_force
+# Add or remove newline between '}' and ')' in a function invocation.
+nl_brace_fparen = ignore # ignore/add/remove/force
-# The position of colons between constructor and member initialization
-pos_class_colon = ignore # ignore/lead/lead_break/lead_force/trail/trail_break/trail_force
+# Add or remove newline between 'while' and '{'.
+nl_while_brace = ignore # ignore/add/remove/force
-#
-# Line Splitting options
-#
+# Add or remove newline between 'scope (x)' and '{' (D).
+nl_scope_brace = ignore # ignore/add/remove/force
-# Try to limit code width to N number of columns
-code_width = 80 # number
+# Add or remove newline between 'unittest' and '{' (D).
+nl_unittest_brace = ignore # ignore/add/remove/force
-# Whether to fully split long 'for' statements at semi-colons
-ls_for_split_full = false # false/true
+# Add or remove newline between 'version (x)' and '{' (D).
+nl_version_brace = ignore # ignore/add/remove/force
-# Whether to fully split long function protos/calls at commas
-ls_func_split_full = false # false/true
+# Add or remove newline between 'using' and '{'.
+nl_using_brace = ignore # ignore/add/remove/force
-#
-# Blank line options
-#
+# Add or remove newline between two open or close braces.
+# Due to general newline/brace handling, REMOVE may not work.
+nl_brace_brace = ignore # ignore/add/remove/force
-# The maximum consecutive newlines
-nl_max = 0 # number
+# Add or remove newline between 'do' and '{'.
+nl_do_brace = ignore # ignore/add/remove/force
-# The number of newlines after a function prototype, if followed by another function prototype
-nl_after_func_proto = 0 # number
+# Add or remove newline between '}' and 'while' of 'do' statement.
+nl_brace_while = ignore # ignore/add/remove/force
-# The number of newlines after a function prototype, if not followed by another function prototype
-nl_after_func_proto_group = 0 # number
+# Add or remove newline between 'switch' and '{'.
+nl_switch_brace = ignore # ignore/add/remove/force
-# The number of newlines after '}' of a multi-line function body
-nl_after_func_body = 0 # number
+# Add or remove newline between 'synchronized' and '{'.
+nl_synchronized_brace = ignore # ignore/add/remove/force
-# The number of newlines after '}' of a multi-line function body in a class declaration
-nl_after_func_body_class = 0 # number
+# Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc.
+# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch and nl_catch_brace.
+nl_multi_line_cond = false # false/true
-# The number of newlines after '}' of a single line function body
-nl_after_func_body_one_liner = 0 # number
+# Force a newline in a define after the macro name for multi-line defines.
+nl_multi_line_define = false # false/true
-# The minimum number of newlines before a multi-line comment.
-# Doesn't apply if after a brace open or another multi-line comment.
-nl_before_block_comment = 0 # number
+# Whether to put a newline before 'case' statement, not after the first 'case'.
+nl_before_case = false # false/true
-# The minimum number of newlines before a single-line C comment.
-# Doesn't apply if after a brace open or other single-line C comments.
-nl_before_c_comment = 0 # number
+# Add or remove newline between ')' and 'throw'.
+nl_before_throw = ignore # ignore/add/remove/force
-# The minimum number of newlines before a CPP comment.
-# Doesn't apply if after a brace open or other CPP comments.
-nl_before_cpp_comment = 0 # number
+# Whether to put a newline after 'case' statement.
+nl_after_case = false # false/true
-# Whether to force a newline after a multi-line comment.
-nl_after_multiline_comment = false # false/true
+# Add or remove a newline between a case ':' and '{'. Overrides nl_after_case.
+nl_case_colon_brace = ignore # ignore/add/remove/force
+
+# Newline between namespace and {.
+nl_namespace_brace = ignore # ignore/add/remove/force
+
+# Add or remove newline between 'template<>' and whatever follows.
+nl_template_class = ignore # ignore/add/remove/force
+
+# Add or remove newline between 'class' and '{'.
+nl_class_brace = ignore # ignore/add/remove/force
+
+# Add or remove newline before/after each ',' in the base class list,
+# (tied to pos_class_comma).
+nl_class_init_args = ignore # ignore/add/remove/force
+
+# Add or remove newline after each ',' in the constructor member initialization.
+# Related to nl_constr_colon, pos_constr_colon and pos_constr_comma.
+nl_constr_init_args = ignore # ignore/add/remove/force
+
+# Add or remove newline before first element, after comma, and after last element in enum.
+nl_enum_own_lines = ignore # ignore/add/remove/force
+
+# Add or remove newline between return type and function name in a function definition.
+nl_func_type_name = ignore # ignore/add/remove/force
+
+# Add or remove newline between return type and function name inside a class {}
+# Uses nl_func_type_name or nl_func_proto_type_name if set to ignore.
+nl_func_type_name_class = ignore # ignore/add/remove/force
+
+# Add or remove newline between class specification and '::' in 'void A::f() { }'
+# Only appears in separate member implementation (does not appear with in-line implmementation).
+nl_func_class_scope = ignore # ignore/add/remove/force
+
+# Add or remove newline between function scope and name
+# Controls the newline after '::' in 'void A::f() { }'.
+nl_func_scope_name = ignore # ignore/add/remove/force
+
+# Add or remove newline between return type and function name in a prototype.
+nl_func_proto_type_name = ignore # ignore/add/remove/force
+
+# Add or remove newline between a function name and the opening '(' in the declaration.
+nl_func_paren = ignore # ignore/add/remove/force
+
+# Overrides nl_func_paren for functions with no parameters.
+nl_func_paren_empty = ignore # ignore/add/remove/force
+
+# Add or remove newline between a function name and the opening '(' in the definition.
+nl_func_def_paren = ignore # ignore/add/remove/force
+
+# Overrides nl_func_def_paren for functions with no parameters.
+nl_func_def_paren_empty = ignore # ignore/add/remove/force
+
+# Add or remove newline between a function name and the opening '(' in the call
+nl_func_call_paren = ignore # ignore/add/remove/force
+
+# Overrides nl_func_call_paren for functions with no parameters.
+nl_func_call_paren_empty = ignore # ignore/add/remove/force
+
+# Add or remove newline after '(' in a function declaration.
+nl_func_decl_start = ignore # ignore/add/remove/force
+
+# Add or remove newline after '(' in a function definition.
+nl_func_def_start = ignore # ignore/add/remove/force
+
+# Overrides nl_func_decl_start when there is only one parameter.
+nl_func_decl_start_single = ignore # ignore/add/remove/force
+
+# Overrides nl_func_def_start when there is only one parameter.
+nl_func_def_start_single = ignore # ignore/add/remove/force
+
+# Whether to add newline after '(' in a function declaration if '(' and ')' are in different lines.
+nl_func_decl_start_multi_line = false # false/true
+
+# Whether to add newline after '(' in a function definition if '(' and ')' are in different lines.
+nl_func_def_start_multi_line = false # false/true
+
+# Add or remove newline after each ',' in a function declaration.
+nl_func_decl_args = ignore # ignore/add/remove/force
+
+# Add or remove newline after each ',' in a function definition.
+nl_func_def_args = ignore # ignore/add/remove/force
+
+# Whether to add newline after each ',' in a function declaration if '(' and ')' are in different lines.
+nl_func_decl_args_multi_line = false # false/true
+
+# Whether to add newline after each ',' in a function definition if '(' and ')' are in different lines.
+nl_func_def_args_multi_line = false # false/true
+
+# Add or remove newline before the ')' in a function declaration.
+nl_func_decl_end = ignore # ignore/add/remove/force
+
+# Add or remove newline before the ')' in a function definition.
+nl_func_def_end = ignore # ignore/add/remove/force
+
+# Overrides nl_func_decl_end when there is only one parameter.
+nl_func_decl_end_single = ignore # ignore/add/remove/force
+
+# Overrides nl_func_def_end when there is only one parameter.
+nl_func_def_end_single = ignore # ignore/add/remove/force
+
+# Whether to add newline before ')' in a function declaration if '(' and ')' are in different lines.
+nl_func_decl_end_multi_line = false # false/true
+
+# Whether to add newline before ')' in a function definition if '(' and ')' are in different lines.
+nl_func_def_end_multi_line = false # false/true
+
+# Add or remove newline between '()' in a function declaration.
+nl_func_decl_empty = ignore # ignore/add/remove/force
+
+# Add or remove newline between '()' in a function definition.
+nl_func_def_empty = ignore # ignore/add/remove/force
+
+# Add or remove newline between '()' in a function call.
+nl_func_call_empty = ignore # ignore/add/remove/force
+
+# Whether to add newline after '(' in a function call if '(' and ')' are in different lines.
+nl_func_call_start_multi_line = false # false/true
+
+# Whether to add newline after each ',' in a function call if '(' and ')' are in different lines.
+nl_func_call_args_multi_line = false # false/true
+
+# Whether to add newline before ')' in a function call if '(' and ')' are in different lines.
+nl_func_call_end_multi_line = false # false/true
+
+# Whether to put each OC message parameter on a separate line
+# See nl_oc_msg_leave_one_liner.
+nl_oc_msg_args = false # false/true
+
+# Add or remove newline between function signature and '{'.
+nl_fdef_brace = ignore # ignore/add/remove/force
+
+# Add or remove newline between C++11 lambda signature and '{'.
+nl_cpp_ldef_brace = ignore # ignore/add/remove/force
+
+# Add or remove a newline between the return keyword and return expression.
+nl_return_expr = ignore # ignore/add/remove/force
+
+# Whether to put a newline after semicolons, except in 'for' statements.
+nl_after_semicolon = false # false/true
+
+# Java: Control the newline between the ')' and '{{' of the double brace initializer.
+nl_paren_dbrace_open = ignore # ignore/add/remove/force
+
+# Whether to put a newline after the type in an unnamed temporary direct-list-initialization.
+nl_type_brace_init_lst = ignore # ignore/add/remove/force
+
+# Whether to put a newline after open brace in an unnamed temporary direct-list-initialization.
+nl_type_brace_init_lst_open = ignore # ignore/add/remove/force
+
+# Whether to put a newline before close brace in an unnamed temporary direct-list-initialization.
+nl_type_brace_init_lst_close = ignore # ignore/add/remove/force
+
+# Whether to put a newline after brace open.
+# This also adds a newline before the matching brace close.
+nl_after_brace_open = false # false/true
+
+# If nl_after_brace_open and nl_after_brace_open_cmt are True, a newline is
+# placed between the open brace and a trailing single-line comment.
+nl_after_brace_open_cmt = false # false/true
+
+# Whether to put a newline after a virtual brace open with a non-empty body.
+# These occur in un-braced if/while/do/for statement bodies.
+nl_after_vbrace_open = false # false/true
+
+# Whether to put a newline after a virtual brace open with an empty body.
+# These occur in un-braced if/while/do/for statement bodies.
+nl_after_vbrace_open_empty = false # false/true
+
+# Whether to put a newline after a brace close.
+# Does not apply if followed by a necessary ';'.
+nl_after_brace_close = false # false/true
+
+# Whether to put a newline after a virtual brace close.
+# Would add a newline before return in: 'if (foo) a++; return;'.
+nl_after_vbrace_close = false # false/true
+
+# Control the newline between the close brace and 'b' in: 'struct { int a; } b;'
+# Affects enums, unions and structures. If set to ignore, uses nl_after_brace_close.
+nl_brace_struct_var = ignore # ignore/add/remove/force
+
+# Whether to alter newlines in '#define' macros.
+nl_define_macro = false # false/true
+
+# Whether to remove blanks after '#ifxx' and '#elxx', or before '#elxx' and '#endif'. Does not affect top-level #ifdefs.
+nl_squeeze_ifdef = false # false/true
+
+# Makes the nl_squeeze_ifdef option affect the top-level #ifdefs as well.
+nl_squeeze_ifdef_top_level = false # false/true
+
+# Add or remove blank line before 'if'.
+nl_before_if = ignore # ignore/add/remove/force
+
+# Add or remove blank line after 'if' statement.
+# Add/Force work only if the next token is not a closing brace.
+nl_after_if = ignore # ignore/add/remove/force
+
+# Add or remove blank line before 'for'.
+nl_before_for = ignore # ignore/add/remove/force
+
+# Add or remove blank line after 'for' statement.
+nl_after_for = ignore # ignore/add/remove/force
+
+# Add or remove blank line before 'while'.
+nl_before_while = ignore # ignore/add/remove/force
+
+# Add or remove blank line after 'while' statement.
+nl_after_while = ignore # ignore/add/remove/force
+
+# Add or remove blank line before 'switch'.
+nl_before_switch = ignore # ignore/add/remove/force
+
+# Add or remove blank line after 'switch' statement.
+nl_after_switch = ignore # ignore/add/remove/force
-# The number of newlines after '}' or ';' of a struct/enum/union definition
-nl_after_struct = 0 # number
+# Add or remove blank line before 'synchronized'.
+nl_before_synchronized = ignore # ignore/add/remove/force
-# The number of newlines after '}' or ';' of a class definition
-nl_after_class = 0 # number
+# Add or remove blank line after 'synchronized' statement.
+nl_after_synchronized = ignore # ignore/add/remove/force
+
+# Add or remove blank line before 'do'.
+nl_before_do = ignore # ignore/add/remove/force
+
+# Add or remove blank line after 'do/while' statement.
+nl_after_do = ignore # ignore/add/remove/force
+
+# Whether to double-space commented-entries in struct/union/enum.
+nl_ds_struct_enum_cmt = false # false/true
+
+# force nl before } of a struct/union/enum
+# (lower priority than 'eat_blanks_before_close_brace').
+nl_ds_struct_enum_close_brace = false # false/true
+
+# Add or remove blank line before 'func_class_def'.
+nl_before_func_class_def = 0 # unsigned number
+
+# Add or remove blank line before 'func_class_proto'.
+nl_before_func_class_proto = 0 # unsigned number
+
+# Add or remove a newline before/after a class colon,
+# (tied to pos_class_colon).
+nl_class_colon = ignore # ignore/add/remove/force
+
+# Add or remove a newline around a class constructor colon.
+# Related to nl_constr_init_args, pos_constr_colon and pos_constr_comma.
+nl_constr_colon = ignore # ignore/add/remove/force
+
+# Change simple unbraced if statements into a one-liner
+# 'if(b)\n i++;' => 'if(b) i++;'.
+nl_create_if_one_liner = false # false/true
+
+# Change simple unbraced for statements into a one-liner
+# 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'.
+nl_create_for_one_liner = false # false/true
+
+# Change simple unbraced while statements into a one-liner
+# 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'.
+nl_create_while_one_liner = false # false/true
+
+# Change a one-liner if statement into simple unbraced if
+# 'if(b) i++;' => 'if(b)\n i++;'.
+nl_split_if_one_liner = false # false/true
+
+# Change a one-liner for statement into simple unbraced for
+# 'for (i=0;<5;i++) foo(i);' => 'for (i=0;<5;i++)\n foo(i);'.
+nl_split_for_one_liner = false # false/true
+
+# Change a one-liner while statement into simple unbraced while
+# 'while (i<5) foo(i++);' => 'while (i<5)\n foo(i++);'.
+nl_split_while_one_liner = false # false/true
+
+#
+# Blank line options
+#
+
+# The maximum consecutive newlines (3 = 2 blank lines).
+nl_max = 0 # unsigned number
+
+# The maximum consecutive newlines in function.
+nl_max_blank_in_func = 0 # unsigned number
+
+# The number of newlines after a function prototype, if followed by another function prototype.
+nl_after_func_proto = 0 # unsigned number
+
+# The number of newlines after a function prototype, if not followed by another function prototype.
+nl_after_func_proto_group = 0 # unsigned number
+
+# The number of newlines after a function class prototype, if followed by another function class prototype.
+nl_after_func_class_proto = 0 # unsigned number
+
+# The number of newlines after a function class prototype, if not followed by another function class prototype.
+nl_after_func_class_proto_group = 0 # unsigned number
+
+# The number of newlines before a multi-line function def body.
+nl_before_func_body_def = 0 # unsigned number
+
+# The number of newlines before a multi-line function prototype body.
+nl_before_func_body_proto = 0 # unsigned number
+
+# The number of newlines after '}' of a multi-line function body.
+nl_after_func_body = 0 # unsigned number
+
+# The number of newlines after '}' of a multi-line function body in a class declaration.
+nl_after_func_body_class = 0 # unsigned number
+
+# The number of newlines after '}' of a single line function body.
+nl_after_func_body_one_liner = 0 # unsigned number
+
+# The minimum number of newlines before a multi-line comment.
+# Doesn't apply if after a brace open or another multi-line comment.
+nl_before_block_comment = 0 # unsigned number
+
+# The minimum number of newlines before a single-line C comment.
+# Doesn't apply if after a brace open or other single-line C comments.
+nl_before_c_comment = 0 # unsigned number
+
+# The minimum number of newlines before a CPP comment.
+# Doesn't apply if after a brace open or other CPP comments.
+nl_before_cpp_comment = 0 # unsigned number
+
+# Whether to force a newline after a multi-line comment.
+nl_after_multiline_comment = false # false/true
+
+# Whether to force a newline after a label's colon.
+nl_after_label_colon = false # false/true
+
+# The number of newlines after '}' or ';' of a struct/enum/union definition.
+nl_after_struct = 0 # unsigned number
+
+# The number of newlines before a class definition.
+nl_before_class = 0 # unsigned number
+
+# The number of newlines after '}' or ';' of a class definition.
+nl_after_class = 0 # unsigned number
# The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
# Will not change the newline count if after a brace open.
# 0 = No change.
-nl_before_access_spec = 0 # number
+nl_before_access_spec = 0 # unsigned number
-# The number of newlines after a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
+# The number of newlines after a 'private:', 'public:', 'protected:', 'signals:' or 'slots:' label.
# 0 = No change.
-nl_after_access_spec = 0 # number
+# Overrides 'nl_typedef_blk_start' and 'nl_var_def_blk_start'.
+nl_after_access_spec = 0 # unsigned number
# The number of newlines between a function def and the function comment.
# 0 = No change.
-nl_comment_func_def = 0 # number
+nl_comment_func_def = 0 # unsigned number
# The number of newlines after a try-catch-finally block that isn't followed by a brace close.
# 0 = No change.
-nl_after_try_catch_finally = 0 # number
+nl_after_try_catch_finally = 0 # unsigned number
# The number of newlines before and after a property, indexer or event decl.
# 0 = No change.
-nl_around_cs_property = 0 # number
+nl_around_cs_property = 0 # unsigned number
# The number of newlines between the get/set/add/remove handlers in C#.
# 0 = No change.
-nl_between_get_set = 0 # number
+nl_between_get_set = 0 # unsigned number
-# Add or remove newline between C# property and the '{'
-nl_property_brace = ignore # ignore/add/remove/force
+# Add or remove newline between C# property and the '{'.
+nl_property_brace = ignore # ignore/add/remove/force
-# Whether to remove blank lines after '{'
-eat_blanks_after_open_brace = false # false/true
+# Whether to remove blank lines after '{'.
+eat_blanks_after_open_brace = false # false/true
-# Whether to remove blank lines before '}'
-eat_blanks_before_close_brace = false # false/true
+# Whether to remove blank lines before '}'.
+eat_blanks_before_close_brace = false # false/true
+
+# How aggressively to remove extra newlines not in preproc.
+# 0: No change
+# 1: Remove most newlines not handled by other config
+# 2: Remove all newlines and reformat completely by config
+nl_remove_extra_newlines = 0 # unsigned number
+
+# Whether to put a blank line before 'return' statements, unless after an open brace.
+nl_before_return = false # false/true
+
+# Whether to put a blank line after 'return' statements, unless followed by a close brace.
+nl_after_return = false # false/true
+
+# Whether to put a newline after a Java annotation statement.
+# Only affects annotations that are after a newline.
+nl_after_annotation = ignore # ignore/add/remove/force
+
+# Controls the newline between two annotations.
+nl_between_annotation = ignore # ignore/add/remove/force
#
-# Code modifying options (non-whitespace)
+# Positioning options
#
-# Add or remove braces on single-line 'do' statement
-mod_full_brace_do = add # ignore/add/remove/force
+# The position of arithmetic operators in wrapped expressions.
+pos_arith = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-# Add or remove braces on single-line 'for' statement
-mod_full_brace_for = add # ignore/add/remove/force
+# The position of assignment in wrapped expressions.
+# Do not affect '=' followed by '{'.
+pos_assign = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-# Add or remove braces on single-line function definitions. (Pawn)
-mod_full_brace_function = ignore # ignore/add/remove/force
+# The position of boolean operators in wrapped expressions.
+pos_bool = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-# Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.
-mod_full_brace_if = add # ignore/add/remove/force
+# The position of comparison operators in wrapped expressions.
+pos_compare = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-# Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if.
-# If any must be braced, they are all braced. If all can be unbraced, then the braces are removed.
-mod_full_brace_if_chain = false # false/true
+# The position of conditional (b ? t : f) operators in wrapped expressions.
+pos_conditional = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-# Don't remove braces around statements that span N newlines
-mod_full_brace_nl = 0 # number
+# The position of the comma in wrapped expressions.
+pos_comma = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-# Add or remove braces on single-line 'while' statement
-mod_full_brace_while = add # ignore/add/remove/force
+# The position of the comma in enum entries.
+pos_enum_comma = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-# Add or remove braces on single-line 'using ()' statement
-mod_full_brace_using = ignore # ignore/add/remove/force
+# The position of the comma in the base class list if there are more than one line,
+# (tied to nl_class_init_args).
+pos_class_comma = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-# Add or remove unnecessary paren on 'return' statement
-mod_paren_on_return = ignore # ignore/add/remove/force
+# The position of the comma in the constructor initialization list.
+# Related to nl_constr_colon, nl_constr_init_args and pos_constr_colon.
+pos_constr_comma = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-# Whether to change optional semicolons to real semicolons
-mod_pawn_semicolon = false # false/true
+# The position of trailing/leading class colon, between class and base class list
+# (tied to nl_class_colon).
+pos_class_colon = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-# Add parens on 'while' and 'if' statement around bools
-mod_full_paren_if_bool = false # false/true
+# The position of colons between constructor and member initialization,
+# (tied to nl_constr_colon).
+# Related to nl_constr_colon, nl_constr_init_args and pos_constr_comma.
+pos_constr_colon = ignore # ignore/join/lead/lead_break/lead_force/trail/trail_break/trail_force
-# Whether to remove superfluous semicolons
-mod_remove_extra_semicolon = false # false/true
+#
+# Line Splitting options
+#
-# If a function body exceeds the specified number of newlines and doesn't have a comment after
-# the close brace, a comment will be added.
-mod_add_long_function_closebrace_comment = 0 # number
+# Try to limit code width to N number of columns
+code_width = 80 # unsigned number
-# If a switch body exceeds the specified number of newlines and doesn't have a comment after
-# the close brace, a comment will be added.
-mod_add_long_switch_closebrace_comment = 0 # number
+# Whether to fully split long 'for' statements at semi-colons.
+ls_for_split_full = false # false/true
-# If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after
-# the #endif, a comment will be added.
-mod_add_long_ifdef_endif_comment = 0 # number
+# Whether to fully split long function protos/calls at commas.
+ls_func_split_full = false # false/true
-# If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after
-# the #else, a comment will be added.
-mod_add_long_ifdef_else_comment = 0 # number
+# Whether to split lines as close to code_width as possible and ignore some groupings.
+ls_code_width = false # false/true
-# If TRUE, will sort consecutive single-line 'import' statements [Java, D]
-mod_sort_import = false # false/true
+#
+# Code alignment (not left column spaces/tabs)
+#
-# If TRUE, will sort consecutive single-line 'using' statements [C#]
-mod_sort_using = false # false/true
+# Whether to keep non-indenting tabs.
+align_keep_tabs = false # false/true
-# If TRUE, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C]
-# This is generally a bad idea, as it may break your code.
-mod_sort_include = false # false/true
+# Whether to use tabs for aligning.
+align_with_tabs = false # false/true
-# If TRUE, it will move a 'break' that appears after a fully braced 'case' before the close brace.
-mod_move_case_break = false # false/true
+# Whether to bump out to the next tab when aligning.
+align_on_tabstop = false # false/true
-# Will add or remove the braces around a fully braced case statement.
-# Will only remove the braces if there are no variable declarations in the block.
-mod_case_brace = ignore # ignore/add/remove/force
+# Whether to right-align numbers.
+align_number_right = false # false/true
+
+# Whether to keep whitespace not required for alignment.
+align_keep_extra_space = false # false/true
+
+# Align variable definitions in prototypes and functions.
+align_func_params = false # false/true
+
+# The span for aligning parameter definitions in function on parameter name (0=don't align).
+align_func_params_span = 0 # unsigned number
+
+# The threshold for aligning function parameter definitions (0=no limit).
+align_func_params_thresh = 0 # unsigned number
+
+# The gap for aligning function parameter definitions.
+align_func_params_gap = 0 # unsigned number
+
+# Align parameters in single-line functions that have the same name.
+# The function names must already be aligned with each other.
+align_same_func_call_params = false # false/true
+
+# The span for aligning variable definitions (0=don't align)
+align_var_def_span = 0 # unsigned number
+
+# How to align the star in variable definitions.
+# 0=Part of the type 'void * foo;'
+# 1=Part of the variable 'void *foo;'
+# 2=Dangling 'void *foo;'
+align_var_def_star_style = 0 # unsigned number
+
+# How to align the '&' in variable definitions.
+# 0=Part of the type
+# 1=Part of the variable
+# 2=Dangling
+align_var_def_amp_style = 0 # unsigned number
+
+# The threshold for aligning variable definitions (0=no limit)
+align_var_def_thresh = 0 # unsigned number
+
+# The gap for aligning variable definitions.
+align_var_def_gap = 0 # unsigned number
+
+# Whether to align the colon in struct bit fields.
+align_var_def_colon = false # false/true
+
+# align variable defs gap for bit colons.
+align_var_def_colon_gap = 0 # unsigned number
+
+# Whether to align any attribute after the variable name.
+align_var_def_attribute = false # false/true
+
+# Whether to align inline struct/enum/union variable definitions.
+align_var_def_inline = false # false/true
+
+# The span for aligning on '=' in assignments (0=don't align)
+align_assign_span = 0 # unsigned number
+
+# The threshold for aligning on '=' in assignments (0=no limit)
+align_assign_thresh = 0 # unsigned number
+
+# The span for aligning on '=' in enums (0=don't align)
+align_enum_equ_span = 0 # unsigned number
+
+# The threshold for aligning on '=' in enums (0=no limit)
+align_enum_equ_thresh = 0 # unsigned number
-# If TRUE, it will remove a void 'return;' that appears as the last statement in a function.
-mod_remove_empty_return = false # false/true
+# The span for aligning class (0=don't align)
+align_var_class_span = 0 # unsigned number
+
+# The threshold for aligning class member definitions (0=no limit).
+align_var_class_thresh = 0 # unsigned number
+
+# The gap for aligning class member definitions.
+align_var_class_gap = 0 # unsigned number
+
+# The span for aligning struct/union (0=don't align)
+align_var_struct_span = 0 # unsigned number
+
+# The threshold for aligning struct/union member definitions (0=no limit)
+align_var_struct_thresh = 0 # unsigned number
+
+# The gap for aligning struct/union member definitions.
+align_var_struct_gap = 0 # unsigned number
+
+# The span for aligning struct initializer values (0=don't align)
+align_struct_init_span = 0 # unsigned number
+
+# The minimum space between the type and the synonym of a typedef.
+align_typedef_gap = 0 # unsigned number
+
+# The span for aligning single-line typedefs (0=don't align).
+align_typedef_span = 0 # unsigned number
+
+# How to align typedef'd functions with other typedefs
+# 0: Don't mix them at all
+# 1: align the open paren with the types
+# 2: align the function type name with the other type names
+align_typedef_func = 0 # unsigned number
+
+# Controls the positioning of the '*' in typedefs. Just try it.
+# 0: Align on typedef type, ignore '*'
+# 1: The '*' is part of type name: typedef int *pint;
+# 2: The '*' is part of the type, but dangling: typedef int *pint;
+align_typedef_star_style = 0 # unsigned number
+
+# Controls the positioning of the '&' in typedefs. Just try it.
+# 0: Align on typedef type, ignore '&'
+# 1: The '&' is part of type name: typedef int &pint;
+# 2: The '&' is part of the type, but dangling: typedef int &pint;
+align_typedef_amp_style = 0 # unsigned number
+
+# The span for aligning comments that end lines (0=don't align)
+align_right_cmt_span = 0 # unsigned number
+
+# If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment.
+align_right_cmt_mix = false # false/true
+
+# If a trailing comment is more than this number of columns away from the text it follows,
+# it will qualify for being aligned. This has to be > 0 to do anything.
+align_right_cmt_gap = 0 # unsigned number
+
+# Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore)
+align_right_cmt_at_col = 0 # unsigned number
+
+# The span for aligning function prototypes (0=don't align).
+align_func_proto_span = 0 # unsigned number
+
+# Minimum gap between the return type and the function name.
+align_func_proto_gap = 0 # unsigned number
+
+# Align function protos on the 'operator' keyword instead of what follows.
+align_on_operator = false # false/true
+
+# Whether to mix aligning prototype and variable declarations.
+# If True, align_var_def_XXX options are used instead of align_func_proto_XXX options.
+align_mix_var_proto = false # false/true
+
+# Align single-line functions with function prototypes, uses align_func_proto_span.
+align_single_line_func = false # false/true
+
+# Aligning the open brace of single-line functions.
+# Requires align_single_line_func=True, uses align_func_proto_span.
+align_single_line_brace = false # false/true
+
+# Gap for align_single_line_brace.
+align_single_line_brace_gap = 0 # unsigned number
+
+# The span for aligning ObjC msg spec (0=don't align)
+align_oc_msg_spec_span = 0 # unsigned number
+
+# Whether to align macros wrapped with a backslash and a newline.
+# This will not work right if the macro contains a multi-line comment.
+align_nl_cont = false # false/true
+
+# # Align macro functions and variables together.
+align_pp_define_together = false # false/true
+
+# The minimum space between label and value of a preprocessor define.
+align_pp_define_gap = 0 # unsigned number
+
+# The span for aligning on '#define' bodies (0=don't align, other=number of lines including comments between blocks)
+align_pp_define_span = 0 # unsigned number
+
+# Align lines that start with '<<' with previous '<<'. Default=True.
+align_left_shift = true # false/true
+
+# Align text after asm volatile () colons.
+align_asm_colon = false # false/true
+
+# Span for aligning parameters in an Obj-C message call on the ':' (0=don't align)
+align_oc_msg_colon_span = 0 # unsigned number
+
+# If True, always align with the first parameter, even if it is too short.
+align_oc_msg_colon_first = false # false/true
+
+# Aligning parameters in an Obj-C '+' or '-' declaration on the ':'.
+align_oc_decl_colon = false # false/true
#
# Comment modifications
#
# Try to wrap comments at cmt_width columns
-cmt_width = 80 # number
+cmt_width = 80 # unsigned number
-# Set the comment reflow mode (default: 0)
+# Set the comment reflow mode (Default=0)
# 0: no reflowing (apart from the line wrapping due to cmt_width)
# 1: no touching at all
# 2: full reflow
-cmt_reflow_mode = 0 # number
+cmt_reflow_mode = 0 # unsigned number
+
+# Whether to convert all tabs to spaces in comments. Default is to leave tabs inside comments alone, unless used for indenting.
+cmt_convert_tab_to_spaces = false # false/true
-# If false, disable all multi-line comment changes, including cmt_width. keyword substitution, and leading chars.
-# Default is true.
-cmt_indent_multi = true # false/true
+# If False, disable all multi-line comment changes, including cmt_width. keyword substitution and leading chars.
+# Default=True.
+cmt_indent_multi = true # false/true
-# Whether to group c-comments that look like they are in a block
-cmt_c_group = false # false/true
+# Whether to group c-comments that look like they are in a block.
+cmt_c_group = false # false/true
-# Whether to put an empty '/*' on the first line of the combined c-comment
-cmt_c_nl_start = false # false/true
+# Whether to put an empty '/*' on the first line of the combined c-comment.
+cmt_c_nl_start = false # false/true
-# Whether to put a newline before the closing '*/' of the combined c-comment
-cmt_c_nl_end = false # false/true
+# Whether to put a newline before the closing '*/' of the combined c-comment.
+cmt_c_nl_end = false # false/true
-# Whether to group cpp-comments that look like they are in a block
-cmt_cpp_group = false # false/true
+# Whether to group cpp-comments that look like they are in a block.
+cmt_cpp_group = false # false/true
-# Whether to put an empty '/*' on the first line of the combined cpp-comment
-cmt_cpp_nl_start = false # false/true
+# Whether to put an empty '/*' on the first line of the combined cpp-comment.
+cmt_cpp_nl_start = false # false/true
-# Whether to put a newline before the closing '*/' of the combined cpp-comment
-cmt_cpp_nl_end = false # false/true
+# Whether to put a newline before the closing '*/' of the combined cpp-comment.
+cmt_cpp_nl_end = false # false/true
-# Whether to change cpp-comments into c-comments
-cmt_cpp_to_c = false # false/true
+# Whether to change cpp-comments into c-comments.
+cmt_cpp_to_c = false # false/true
-# Whether to put a star on subsequent comment lines
-cmt_star_cont = false # false/true
+# Whether to put a star on subsequent comment lines.
+cmt_star_cont = false # false/true
-# The number of spaces to insert at the start of subsequent comment lines
-cmt_sp_before_star_cont = 0 # number
+# The number of spaces to insert at the start of subsequent comment lines.
+cmt_sp_before_star_cont = 0 # unsigned number
-# The number of spaces to insert after the star on subsequent comment lines
-cmt_sp_after_star_cont = 0 # number
+# The number of spaces to insert after the star on subsequent comment lines.
+cmt_sp_after_star_cont = 0 # number
# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
-# the comment are the same length. Default=True
-cmt_multi_check_last = true # false/true
+# the comment are the same length. Default=True.
+cmt_multi_check_last = true # false/true
+
+# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
+# the comment are the same length AND if the length is bigger as the first_len minimum. Default=4
+cmt_multi_first_len_minimum = 4 # unsigned number
# The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment.
# Will substitute $(filename) with the current file's name.
-cmt_insert_file_header = "" # string
+cmt_insert_file_header = "" # string
# The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment.
# Will substitute $(filename) with the current file's name.
-cmt_insert_file_footer = "" # string
+cmt_insert_file_footer = "" # string
# The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment.
# Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff.
-# Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }
-cmt_insert_func_header = "" # string
+# Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }.
+cmt_insert_func_header = "" # string
# The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment.
# Will substitute $(class) with the class name.
-cmt_insert_class_header = "" # string
+cmt_insert_class_header = "" # string
-# The filename that contains text to insert before an Obj-C message specification if the method isn't preceded with a C/C++ comment.
+# The filename that contains text to insert before a Obj-C message specification if the method isn't preceded with a C/C++ comment.
# Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff.
-cmt_insert_oc_msg_header = "" # string
+cmt_insert_oc_msg_header = "" # string
# If a preprocessor is encountered when stepping backwards from a function name, then
# this option decides whether the comment should be inserted.
# Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header.
-cmt_insert_before_preproc = false # false/true
+cmt_insert_before_preproc = false # false/true
+
+# If a function is declared inline to a class definition, then
+# this option decides whether the comment should be inserted.
+# Affects cmt_insert_func_header.
+cmt_insert_before_inlines = true # false/true
+
+# If the function is a constructor/destructor, then
+# this option decides whether the comment should be inserted.
+# Affects cmt_insert_func_header.
+cmt_insert_before_ctor_dtor = false # false/true
+
+#
+# Code modifying options (non-whitespace)
+#
+
+# Add or remove braces on single-line 'do' statement.
+mod_full_brace_do = add # ignore/add/remove/force
+
+# Add or remove braces on single-line 'for' statement.
+mod_full_brace_for = add # ignore/add/remove/force
+
+# Add or remove braces on single-line function definitions. (Pawn).
+mod_full_brace_function = ignore # ignore/add/remove/force
+
+# Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.
+mod_full_brace_if = add # ignore/add/remove/force
+
+# Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if.
+# If any must be braced, they are all braced. If all can be unbraced, then the braces are removed.
+mod_full_brace_if_chain = false # false/true
+
+# Make all if/elseif/else statements with at least one 'else' or 'else if' fully braced.
+# If mod_full_brace_if_chain is used together with this option, all if-else chains will get braces,
+# and simple 'if' statements will lose them (if possible).
+mod_full_brace_if_chain_only = false # false/true
+
+# Don't remove braces around statements that span N newlines
+mod_full_brace_nl = 0 # unsigned number
+
+# Blocks removal of braces if the parenthesis of if/for/while/.. span multiple lines.
+mod_full_brace_nl_block_rem_mlcond = false # false/true
+
+# Add or remove braces on single-line 'while' statement.
+mod_full_brace_while = add # ignore/add/remove/force
+
+# Add or remove braces on single-line 'using ()' statement.
+mod_full_brace_using = ignore # ignore/add/remove/force
+
+# Add or remove unnecessary paren on 'return' statement.
+mod_paren_on_return = ignore # ignore/add/remove/force
+
+# Whether to change optional semicolons to real semicolons.
+mod_pawn_semicolon = false # false/true
+
+# Add parens on 'while' and 'if' statement around bools.
+mod_full_paren_if_bool = false # false/true
+
+# Whether to remove superfluous semicolons.
+mod_remove_extra_semicolon = false # false/true
+
+# If a function body exceeds the specified number of newlines and doesn't have a comment after
+# the close brace, a comment will be added.
+mod_add_long_function_closebrace_comment = 0 # unsigned number
+
+# If a namespace body exceeds the specified number of newlines and doesn't have a comment after
+# the close brace, a comment will be added.
+mod_add_long_namespace_closebrace_comment = 0 # unsigned number
+
+# If a class body exceeds the specified number of newlines and doesn't have a comment after
+# the close brace, a comment will be added.
+mod_add_long_class_closebrace_comment = 0 # unsigned number
+
+# If a switch body exceeds the specified number of newlines and doesn't have a comment after
+# the close brace, a comment will be added.
+mod_add_long_switch_closebrace_comment = 0 # unsigned number
+
+# If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after
+# the #endif, a comment will be added.
+mod_add_long_ifdef_endif_comment = 0 # unsigned number
+
+# If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after
+# the #else, a comment will be added.
+mod_add_long_ifdef_else_comment = 0 # unsigned number
+
+# If True, will sort consecutive single-line 'import' statements [Java, D].
+mod_sort_import = false # false/true
+
+# If True, will sort consecutive single-line 'using' statements [C#].
+mod_sort_using = false # false/true
+
+# If True, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C]
+# This is generally a bad idea, as it may break your code.
+mod_sort_include = false # false/true
+
+# If True, it will move a 'break' that appears after a fully braced 'case' before the close brace.
+mod_move_case_break = false # false/true
+
+# Will add or remove the braces around a fully braced case statement.
+# Will only remove the braces if there are no variable declarations in the block.
+mod_case_brace = ignore # ignore/add/remove/force
+
+# If True, it will remove a void 'return;' that appears as the last statement in a function.
+mod_remove_empty_return = false # false/true
+
+# If True, it will organize the properties (Obj-C).
+mod_sort_oc_properties = false # false/true
+
+# Determines weight of class property modifier (Obj-C).
+mod_sort_oc_property_class_weight = 0 # number
+
+# Determines weight of atomic, nonatomic (Obj-C).
+mod_sort_oc_property_thread_safe_weight = 0 # number
+
+# Determines weight of readwrite (Obj-C).
+mod_sort_oc_property_readwrite_weight = 0 # number
+
+# Determines weight of reference type (retain, copy, assign, weak, strong) (Obj-C).
+mod_sort_oc_property_reference_weight = 0 # number
+
+# Determines weight of getter type (getter=) (Obj-C).
+mod_sort_oc_property_getter_weight = 0 # number
+
+# Determines weight of setter type (setter=) (Obj-C).
+mod_sort_oc_property_setter_weight = 0 # number
+
+# Determines weight of nullability type (nullable, nonnull, null_unspecified, null_resettable) (Obj-C).
+mod_sort_oc_property_nullability_weight = 0 # number
#
# Preprocessor options
#
-# Control indent of preprocessors inside #if blocks at brace level 0
-pp_indent = ignore # ignore/add/remove/force
+# Control indent of preprocessors inside #if blocks at brace level 0 (file-level).
+pp_indent = ignore # ignore/add/remove/force
+
+# Whether to indent #if/#else/#endif at the brace level (True) or from column 1 (False).
+pp_indent_at_level = false # false/true
+
+# Specifies the number of columns to indent preprocessors per level at brace level 0 (file-level).
+# If pp_indent_at_level=False, specifies the number of columns to indent preprocessors per level at brace level > 0 (function-level).
+# Default=1.
+pp_indent_count = 1 # unsigned number
+
+# Add or remove space after # based on pp_level of #if blocks.
+pp_space = ignore # ignore/add/remove/force
+
+# Sets the number of spaces added with pp_space.
+pp_space_count = 0 # unsigned number
+
+# The indent for #region and #endregion in C# and '#pragma region' in C/C++.
+pp_indent_region = 0 # number
-# Whether to indent #if/#else/#endif at the brace level (true) or from column 1 (false)
-pp_indent_at_level = false # false/true
+# Whether to indent the code between #region and #endregion.
+pp_region_indent_code = false # false/true
-# If pp_indent_at_level=false, specifies the number of columns to indent per level. Default=1.
-pp_indent_count = 1 # number
+# If pp_indent_at_level=True, sets the indent for #if, #else and #endif when not at file-level.
+# 0: indent preprocessors using output_tab_size.
+# >0: column at which all preprocessors will be indented.
+pp_indent_if = 0 # number
-# Add or remove space after # based on pp_level of #if blocks
-pp_space = ignore # ignore/add/remove/force
+# Control whether to indent the code between #if, #else and #endif.
+pp_if_indent_code = false # false/true
-# Sets the number of spaces added with pp_space
-pp_space_count = 0 # number
+# Whether to indent '#define' at the brace level (True) or from column 1 (false).
+pp_define_at_level = false # false/true
-# The indent for #region and #endregion in C# and '#pragma region' in C/C++
-pp_indent_region = 0 # number
+# Whether to ignore the '#define' body while formatting.
+pp_ignore_define_body = false # false/true
-# Whether to indent the code between #region and #endregion
-pp_region_indent_code = false # false/true
+# Whether to indent case statements between #if, #else, and #endif.
+# Only applies to the indent of the preprocesser that the case statements directly inside of.
+pp_indent_case = true # false/true
-# If pp_indent_at_level=true, sets the indent for #if, #else, and #endif when not at file-level
-pp_indent_if = 0 # number
+# Whether to indent whole function definitions between #if, #else, and #endif.
+# Only applies to the indent of the preprocesser that the function definition is directly inside of.
+pp_indent_func_def = true # false/true
+
+# Whether to indent extern C blocks between #if, #else, and #endif.
+# Only applies to the indent of the preprocesser that the extern block is directly inside of.
+pp_indent_extern = true # false/true
+
+# Whether to indent braces directly inside #if, #else, and #endif.
+# Only applies to the indent of the preprocesser that the braces are directly inside of.
+pp_indent_brace = true # false/true
+
+#
+# Sort includes options
+#
-# Control whether to indent the code between #if, #else and #endif when not at file-level
-pp_if_indent_code = false # false/true
+# The regex for include category with priority 0.
+include_category_0 = "" # string
-# Whether to indent '#define' at the brace level (true) or from column 1 (false)
-pp_define_at_level = false # false/true
+# The regex for include category with priority 1.
+include_category_1 = "" # string
-# You can force a token to be a type with the 'type' option.
-# Example:
-# type myfoo1 myfoo2
+# The regex for include category with priority 2.
+include_category_2 = "" # string
+
+#
+# Use or Do not Use options
+#
+
+# True: indent_func_call_param will be used (default)
+# False: indent_func_call_param will NOT be used.
+use_indent_func_call_param = true # false/true
+
+# The value of the indentation for a continuation line is calculate differently if the line is:
+# a declaration :your case with QString fileName ...
+# an assignment :your case with pSettings = new QSettings( ...
+# At the second case the option value might be used twice:
+# at the assignment
+# at the function call (if present)
+# To prevent the double use of the option value, use this option with the value 'True'.
+# True: indent_continue will be used only once
+# False: indent_continue will be used every time (default).
+use_indent_continue_only_once = false # false/true
+
+# SIGNAL/SLOT Qt macros have special formatting options. See options_for_QT.cpp for details.
+# Default=True.
+use_options_overriding_for_qt_macros = true # false/true
+
+#
+# Warn levels - 1: error, 2: warning (default), 3: note
+#
+
+# Warning is given if doing tab-to-\t replacement and we have found one in a C# verbatim string literal.
+warn_level_tabs_found_in_verbatim_string_literals = 2 # unsigned number
+
+# Meaning of the settings:
+# Ignore - do not do any changes
+# Add - makes sure there is 1 or more space/brace/newline/etc
+# Force - makes sure there is exactly 1 space/brace/newline/etc,
+# behaves like Add in some contexts
+# Remove - removes space/brace/newline/etc
+#
+#
+# - Token(s) can be treated as specific type(s) with the 'set' option:
+# `set tokenType tokenString [tokenString...]`
+#
+# Example:
+# `set BOOL __AND__ __OR__`
+#
+# tokenTypes are defined in src/token_enum.h, use them without the
+# 'CT_' prefix: 'CT_BOOL' -> 'BOOL'
+#
+#
+# - Token(s) can be treated as type(s) with the 'type' option.
+# `type tokenString [tokenString...]`
+#
+# Example:
+# `type int c_uint_8 Rectangle`
+#
+# This can also be achieved with `set TYPE int c_uint_8 Rectangle`
+#
+#
+# To embed whitespace in tokenStrings use the '\' escape character, or quote
+# the tokenStrings. These quotes are supported: "'`
+#
+#
+# - Support for the auto detection of languages through the file ending can be
+# added using the 'file_ext' command.
+# `file_ext langType langString [langString..]`
#
-# You can create custom macro-based indentation using macro-open,
-# macro-else and macro-close.
-# Example:
-# macro-open BEGIN_TEMPLATE_MESSAGE_MAP
-# macro-open BEGIN_MESSAGE_MAP
-# macro-close END_MESSAGE_MAP
+# Example:
+# `file_ext CPP .ch .cxx .cpp.in`
#
-# You can assign any keyword to any type with the set option.
-# set func_call_user _ N_
+# langTypes are defined in uncrusify_types.h in the lang_flag_e enum, use
+# them without the 'LANG_' prefix: 'LANG_CPP' -> 'CPP'
#
-# The full syntax description of all custom definition config entries
-# is shown below:
#
-# define custom tokens as:
-# - embed whitespace in token using '' escape character, or
-# put token in quotes
-# - these: ' " and ` are recognized as quote delimiters
+# - Custom macro-based indentation can be set up using 'macro-open',
+# 'macro-else' and 'macro-close'.
+# `(macro-open | macro-else | macro-close) tokenString`
#
-# type token1 token2 token3 ...
-# ^ optionally specify multiple tokens on a single line
-# define def_token output_token
-# ^ output_token is optional, then NULL is assumed
-# macro-open token
-# macro-close token
-# macro-else token
-# set id token1 token2 ...
-# ^ optionally specify multiple tokens on a single line
-# ^ id is one of the names in token_enum.h sans the CT_ prefix,
-# e.g. PP_PRAGMA
+# Example:
+# `macro-open BEGIN_TEMPLATE_MESSAGE_MAP`
+# `macro-open BEGIN_MESSAGE_MAP`
+# `macro-close END_MESSAGE_MAP`
#
-# all tokens are separated by any mix of ',' commas, '=' equal signs
-# and whitespace (space, tab)
+## option(s) with 'not default' value: 46
#
projects / thirdparty / ccache.git / commitdiff
