realtek: eth: use device specifc hardware reset

The hardware reset is a combined function for all device families.
So it uses several family specific branches to decide what is
really needed. Refactor this into device specific variants to make
it easier to understand.

The cpu port and nic reset sequence is the same for all families.
Provide this with a dedicated function.

Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/21569
Signed-off-by: Robert Marko <robimarko@gmail.com>

diff --git a/target/linux/realtek/files-6.12/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-6.12/drivers/net/ethernet/rtl838x_eth.c
index 89161d5ac2031d08cdea43a275d05ec5cdab7575..abce3948210f63a9091aca160b0adec6d88d11a2 100644 (file)
--- a/target/linux/realtek/files-6.12/drivers/net/ethernet/rtl838x_eth.c
+++ b/target/linux/realtek/files-6.12/drivers/net/ethernet/rtl838x_eth.c
@@ -444,79 +444,82 @@ static irqreturn_t rtl93xx_net_irq(int irq, void *dev_id)
        return IRQ_HANDLED;
 }
 
-static void rtl838x_hw_reset(struct rteth_ctrl *ctrl)
+static void rteth_nic_reset(struct rteth_ctrl *ctrl, int reset_mask)
 {
-       u32 int_saved, nbuf;
-       u32 reset_mask;
-
-       pr_info("RESETTING %x, CPU_PORT %d\n", ctrl->r->family_id, ctrl->r->cpu_port);
+       pr_info("RESETTING CPU_PORT %d\n", ctrl->r->cpu_port);
        sw_w32_mask(0x3, 0, ctrl->r->mac_port_ctrl(ctrl->r->cpu_port));
        mdelay(100);
 
+       /* Reset NIC (SW_NIC_RST) and queues (SW_Q_RST) */
+       sw_w32_mask(0, reset_mask, ctrl->r->rst_glb_ctrl);
+       while (sw_r32(ctrl->r->rst_glb_ctrl) & reset_mask)
+               udelay(20);
+
+       mdelay(100);
+}
+
+static void rteth_838x_hw_reset(struct rteth_ctrl *ctrl)
+{
        /* Disable and clear interrupts */
-       if (ctrl->r->family_id == RTL9300_FAMILY_ID || ctrl->r->family_id == RTL9310_FAMILY_ID) {
-               sw_w32(0x00000000, ctrl->r->dma_if_intr_rx_runout_msk);
-               sw_w32(0xffffffff, ctrl->r->dma_if_intr_rx_runout_sts);
-               sw_w32(0x00000000, ctrl->r->dma_if_intr_rx_done_msk);
-               sw_w32(0xffffffff, ctrl->r->dma_if_intr_rx_done_sts);
-               sw_w32(0x00000000, ctrl->r->dma_if_intr_tx_done_msk);
-               sw_w32(0x0000000f, ctrl->r->dma_if_intr_tx_done_sts);
-       } else {
-               sw_w32(0x00000000, ctrl->r->dma_if_intr_msk);
-               sw_w32(0xffffffff, ctrl->r->dma_if_intr_sts);
-       }
+       sw_w32(0x00000000, ctrl->r->dma_if_intr_msk);
+       sw_w32(0xffffffff, ctrl->r->dma_if_intr_sts);
 
-       if (ctrl->r->family_id == RTL8390_FAMILY_ID) {
-               /* Preserve L2 notification and NBUF settings */
-               int_saved = sw_r32(ctrl->r->dma_if_intr_msk);
-               nbuf = sw_r32(RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL);
+       rteth_nic_reset(ctrl, 0xc);
 
-               /* Disable link change interrupt on RTL839x */
-               sw_w32(0, RTL839X_IMR_PORT_LINK_STS_CHG);
-               sw_w32(0, RTL839X_IMR_PORT_LINK_STS_CHG + 4);
+       /* Setup Head of Line */
+       sw_w32(0, RTL838X_DMA_IF_RX_RING_SIZE);  /* Disabled on RTL8380 */
+}
 
-               sw_w32(0x00000000, ctrl->r->dma_if_intr_msk);
-               sw_w32(0xffffffff, ctrl->r->dma_if_intr_sts);
-       }
+static void rteth_839x_hw_reset(struct rteth_ctrl *ctrl)
+{
+       u32 int_saved, nbuf;
 
-       /* Reset NIC (SW_NIC_RST) and queues (SW_Q_RST) */
-       if (ctrl->r->family_id == RTL9300_FAMILY_ID || ctrl->r->family_id == RTL9310_FAMILY_ID)
-               reset_mask = 0x6;
-       else
-               reset_mask = 0xc;
+       /* Disable and clear interrupts */
+       sw_w32(0x00000000, ctrl->r->dma_if_intr_msk);
+       sw_w32(0xffffffff, ctrl->r->dma_if_intr_sts);
 
-       sw_w32_mask(0, reset_mask, ctrl->r->rst_glb_ctrl);
+       /* Preserve L2 notification and NBUF settings */
+       int_saved = sw_r32(ctrl->r->dma_if_intr_msk);
+       nbuf = sw_r32(RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL);
 
-       do { /* Wait for reset of NIC and Queues done */
-               udelay(20);
-       } while (sw_r32(ctrl->r->rst_glb_ctrl) & reset_mask);
-       mdelay(100);
+       /* Disable link change interrupt on RTL839x */
+       sw_w32(0, RTL839X_IMR_PORT_LINK_STS_CHG);
+       sw_w32(0, RTL839X_IMR_PORT_LINK_STS_CHG + 4);
 
-       /* Setup Head of Line */
-       if (ctrl->r->family_id == RTL8380_FAMILY_ID)
-               sw_w32(0, RTL838X_DMA_IF_RX_RING_SIZE);  /* Disabled on RTL8380 */
-       if (ctrl->r->family_id == RTL8390_FAMILY_ID)
-               sw_w32(0xffffffff, RTL839X_DMA_IF_RX_RING_CNTR);
-       if (ctrl->r->family_id == RTL9300_FAMILY_ID || ctrl->r->family_id == RTL9310_FAMILY_ID) {
-               for (int i = 0; i < ctrl->rxrings; i++) {
-                       int pos = (i % 3) * 10;
+       rteth_nic_reset(ctrl, 0xc);
 
-                       sw_w32_mask(0x3ff << pos, 0, ctrl->r->dma_if_rx_ring_size(i));
-                       sw_w32_mask(0x3ff << pos, ctrl->rxringlen,
-                                   ctrl->r->dma_if_rx_ring_cntr(i));
-               }
-       }
+       /* Setup Head of Line */
+       sw_w32(0xffffffff, RTL839X_DMA_IF_RX_RING_CNTR);
 
        /* Re-enable link change interrupt */
-       if (ctrl->r->family_id == RTL8390_FAMILY_ID) {
-               sw_w32(0xffffffff, RTL839X_ISR_PORT_LINK_STS_CHG);
-               sw_w32(0xffffffff, RTL839X_ISR_PORT_LINK_STS_CHG + 4);
-               sw_w32(0xffffffff, RTL839X_IMR_PORT_LINK_STS_CHG);
-               sw_w32(0xffffffff, RTL839X_IMR_PORT_LINK_STS_CHG + 4);
-
-               /* Restore notification settings: on RTL838x these bits are null */
-               sw_w32_mask(7 << 20, int_saved & (7 << 20), ctrl->r->dma_if_intr_msk);
-               sw_w32(nbuf, RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL);
+       sw_w32(0xffffffff, RTL839X_ISR_PORT_LINK_STS_CHG);
+       sw_w32(0xffffffff, RTL839X_ISR_PORT_LINK_STS_CHG + 4);
+       sw_w32(0xffffffff, RTL839X_IMR_PORT_LINK_STS_CHG);
+       sw_w32(0xffffffff, RTL839X_IMR_PORT_LINK_STS_CHG + 4);
+
+       /* Restore notification settings: on RTL838x these bits are null */
+       sw_w32_mask(7 << 20, int_saved & (7 << 20), ctrl->r->dma_if_intr_msk);
+       sw_w32(nbuf, RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL);
+}
+
+static void rteth_93xx_hw_reset(struct rteth_ctrl *ctrl)
+{
+       /* Disable and clear interrupts */
+       sw_w32(0x00000000, ctrl->r->dma_if_intr_rx_runout_msk);
+       sw_w32(0xffffffff, ctrl->r->dma_if_intr_rx_runout_sts);
+       sw_w32(0x00000000, ctrl->r->dma_if_intr_rx_done_msk);
+       sw_w32(0xffffffff, ctrl->r->dma_if_intr_rx_done_sts);
+       sw_w32(0x00000000, ctrl->r->dma_if_intr_tx_done_msk);
+       sw_w32(0x0000000f, ctrl->r->dma_if_intr_tx_done_sts);
+
+       rteth_nic_reset(ctrl, 0x6);
+
+       /* Setup Head of Line */
+       for (int i = 0; i < ctrl->rxrings; i++) {
+               int pos = (i % 3) * 10;
+
+               sw_w32_mask(0x3ff << pos, 0, ctrl->r->dma_if_rx_ring_size(i));
+               sw_w32_mask(0x3ff << pos, ctrl->rxringlen, ctrl->r->dma_if_rx_ring_cntr(i));
        }
 }
 
@@ -690,7 +693,7 @@ static int rtl838x_eth_open(struct net_device *ndev)
                 __func__, ctrl->rxrings, ctrl->rxringlen, TXRINGS, TXRINGLEN);
 
        spin_lock_irqsave(&ctrl->lock, flags);
-       rtl838x_hw_reset(ctrl);
+       ctrl->r->hw_reset(ctrl);
        rtl838x_setup_ring_buffer(ctrl, ring);
        if (ctrl->r->family_id == RTL8390_FAMILY_ID) {
                rtl839x_setup_notify_ring_buffer(ctrl);
@@ -1485,6 +1488,7 @@ static const struct rteth_config rteth_838x_cfg = {
        .update_cntr = rtl838x_update_cntr,
        .create_tx_header = rteth_838x_create_tx_header,
        .decode_tag = rteth_838x_decode_tag,
+       .hw_reset = &rteth_838x_hw_reset,
        .init_mac = &rteth_838x_init_mac,
        .netdev_ops = &rteth_838x_netdev_ops,
 };
@@ -1528,6 +1532,7 @@ static const struct rteth_config rteth_839x_cfg = {
        .update_cntr = rtl839x_update_cntr,
        .create_tx_header = rteth_839x_create_tx_header,
        .decode_tag = rteth_839x_decode_tag,
+       .hw_reset = &rteth_839x_hw_reset,
        .init_mac = &rteth_839x_init_mac,
        .netdev_ops = &rteth_839x_netdev_ops,
 };
@@ -1577,6 +1582,7 @@ static const struct rteth_config rteth_930x_cfg = {
        .update_cntr = rtl930x_update_cntr,
        .create_tx_header = rteth_930x_create_tx_header,
        .decode_tag = rteth_930x_decode_tag,
+       .hw_reset = &rteth_93xx_hw_reset,
        .init_mac = &rteth_930x_init_mac,
        .netdev_ops = &rteth_930x_netdev_ops,
 };
@@ -1625,6 +1631,7 @@ static const struct rteth_config rteth_931x_cfg = {
        .update_cntr = rtl931x_update_cntr,
        .create_tx_header = rteth_931x_create_tx_header,
        .decode_tag = rteth_931x_decode_tag,
+       .hw_reset = &rteth_93xx_hw_reset,
        .init_mac = &rteth_931x_init_mac,
        .netdev_ops = &rteth_931x_netdev_ops,
 };

diff --git a/target/linux/realtek/files-6.12/drivers/net/ethernet/rtl838x_eth.h b/target/linux/realtek/files-6.12/drivers/net/ethernet/rtl838x_eth.h
index 973a376c25e24607533cd40ad6d16fb1dfe5178d..ea4623d4c458cd3b324a9c9291f9fb2158e9e67b 100644 (file)
--- a/target/linux/realtek/files-6.12/drivers/net/ethernet/rtl838x_eth.h
+++ b/target/linux/realtek/files-6.12/drivers/net/ethernet/rtl838x_eth.h
@@ -453,6 +453,7 @@ struct rteth_config {
        void (*update_cntr)(int r, int work_done);
        void (*create_tx_header)(struct p_hdr *h, unsigned int dest_port, int prio);
        bool (*decode_tag)(struct p_hdr *h, struct dsa_tag *tag);
+       void (*hw_reset)(struct rteth_ctrl *ctrl);
        int (*init_mac)(struct rteth_ctrl *ctrl);
        const struct net_device_ops *netdev_ops;
 };