arm64: dts: imx95-15x15-evk: Disable PCIe bus in the default dts

Disable the PCIe bus in the default device tree to avoid shared
regulator conflicts between SDIO and PCIe buses. The non-deterministic
probe order between these two buses can break the PCIe initialization
sequence, causing PCIe devices to fail detection intermittently.

On i.MX95-15x15 EVK board, the M.2 connector is physically wired to both
USDHC3 and PCIe0, however the out-of-box module is SDIO IW612 WiFi, so
enable SDIO WiFi in the default imx95-15x15-evk.dts.

Add 'm2_usdhc' label to USDHC3 to support device tree overlay for PCIe
modules. Users who need PCIe can use imx95-15x15-evk-pcie.dtb (added in
a follow-up patch) which applies an overlay to enable PCIe and disable
USDHC3.

Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>

diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
index 7eb12e7d50143cacfa03cd4b0703c4caeb7d04d5..e4649d7f9122a1f875ee276d4f8c15e06416c8f3 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
@@ -557,7 +557,7 @@
        vpcie-supply = <&reg_m2_pwr>;
        vpcie3v3aux-supply = <&reg_m2_pwr>;
        supports-clkreq;
-       status = "okay";
+       status = "disabled";
 };
 
 &pcie0_ep {
@@ -1137,7 +1137,7 @@
        status = "okay";
 };
 
-&usdhc3 {
+m2_usdhc: &usdhc3 {
        bus-width = <4>;
        keep-power-in-suspend;
        mmc-pwrseq = <&usdhc3_pwrseq>;