Document more network profile parameters

Some of the recently added wpa_supplicant network profile parameters
were not documented in wpa_supplicant.conf. Add these there based on the
documentation in config_ssid.h.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>

diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf
index 45a811f6486e717fcc7c983bef36c7a7c607423a..bf8a6dd5ae636cd60f893431dd1c58afb8c36141 100644 (file)
--- a/wpa_supplicant/wpa_supplicant.conf
+++ b/wpa_supplicant/wpa_supplicant.conf
@@ -1472,6 +1472,50 @@ fast_reauth=1
 # 2: do not allow PFS to be used
 #dpp_pfs=0
 
+# Whether Beacon protection is enabled
+# This depends on management frame protection (ieee80211w) being enabled.
+#beacon_prot=0
+
+# OWE DH Group
+# 0: use default (19) first and then try all supported groups one by one if AP
+#   rejects the selected group
+# 1-65535: DH Group to use for OWE
+# Groups 19 (NIST P-256), 20 (NIST P-384), and 21 (NIST P-521) are
+# currently supported.
+#owe_group=0
+
+# OWE-only mode (disable transition mode)
+# 0: enable transition mode (allow connection to either OWE or open BSS)
+# 1 = disable transition mode (allow connection only with OWE)
+#owe_only=0
+
+# OWE PTK derivation workaround
+# Initial OWE implementation used SHA256 when deriving the PTK for all
+# OWE groups. This was supposed to change to SHA384 for group 20 and
+# SHA512 for group 21. This parameter can be used to enable older
+# behavior mainly for testing purposes. There is no impact to group 19
+# behavior, but if enabled, this will make group 20 and 21 cases use
+# SHA256-based PTK derivation which will not work with the updated
+# OWE implementation on the AP side.
+#owe_ptk_workaround=0
+
+# Transition Disable indication
+# The AP can notify authenticated stations to disable transition mode
+# in their network profiles when the network has completed transition
+# steps, i.e., once sufficiently large number of APs in the ESS have
+# been updated to support the more secure alternative. When this
+# indication is used, the stations are expected to automatically
+# disable transition mode and less secure security options. This
+# includes use of WEP, TKIP (including use of TKIP as the group
+# cipher), and connections without PMF.
+# Bitmap bits:
+# bit 0 (0x01): WPA3-Personal (i.e., disable WPA2-Personal = WPA-PSK
+#      and only allow SAE to be used)
+# bit 1 (0x02): SAE-PK (disable SAE without use of SAE-PK)
+# bit 2 (0x04): WPA3-Enterprise (move to requiring PMF)
+# bit 3 (0x08): Enhanced Open (disable use of open network; require
+#      OWE)
+
 # SAE-PK only mode (disable transition mode)
 # 0: enable transition mode (allow SAE authentication without SAE-PK)
 # 1: disable transition mode (allow SAE authentication only with SAE-PK)