* Copyright (c) 2025 Microchip Technology Inc. and its subsidiaries.
*/
-#include <dt-bindings/clock/microchip,lan969x.h>
+#include <dt-bindings/clock/microchip,lan9691.h>
#include <dt-bindings/dma/at91.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mfd/at91-usart.h>
#size-cells = <1>;
model = "Microchip LAN969x";
- compatible = "microchip,lan969x";
+ compatible = "microchip,lan9691";
interrupt-parent = <&gic>;
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
clocks {
fx100_clk: fx100-clk {
compatible = "fixed-clock";
};
};
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
};
flx0: flexcom@e0040000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,lan9691-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe0040000 0x100>;
+ ranges = <0x0 0xe0040000 0x800>;
clocks = <&clks GCK_ID_FLEXCOM0>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0xe0040000 0x800>;
status = "disabled";
usart0: serial@200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "microchip,lan9691-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
- atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma AT91_XDMAC_DT_PERID(3)>,
<&dma AT91_XDMAC_DT_PERID(2)>;
clocks = <&fabric_clk>;
clock-names = "usart";
atmel,fifo-size = <32>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
status = "disabled";
};
spi0: spi@400 {
- compatible = "atmel,at91rm9200-spi";
+ compatible = "microchip,lan9691-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma AT91_XDMAC_DT_PERID(3)>,
dma-names = "tx", "rx";
clocks = <&fabric_clk>;
clock-names = "spi_clk";
- atmel,fifo-size = <32>;
#address-cells = <1>;
#size-cells = <0>;
+ atmel,fifo-size = <32>;
status = "disabled";
};
i2c0: i2c@600 {
- compatible = "microchip,sam9x60-i2c";
+ compatible = "microchip,lan9691-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma AT91_XDMAC_DT_PERID(3)>,
};
flx1: flexcom@e0044000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,lan9691-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe0044000 0x100>;
+ ranges = <0x0 0xe0044000 0x800>;
clocks = <&clks GCK_ID_FLEXCOM1>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0xe0044000 0x800>;
status = "disabled";
usart1: serial@200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "microchip,lan9691-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
- atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma AT91_XDMAC_DT_PERID(3)>,
<&dma AT91_XDMAC_DT_PERID(2)>;
clocks = <&fabric_clk>;
clock-names = "usart";
atmel,fifo-size = <32>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
status = "disabled";
};
spi1: spi@400 {
- compatible = "atmel,at91rm9200-spi";
+ compatible = "microchip,lan9691-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma AT91_XDMAC_DT_PERID(3)>,
dma-names = "tx", "rx";
clocks = <&fabric_clk>;
clock-names = "spi_clk";
- atmel,fifo-size = <32>;
#address-cells = <1>;
#size-cells = <0>;
+ atmel,fifo-size = <32>;
status = "disabled";
};
i2c1: i2c@600 {
- compatible = "microchip,sam9x60-i2c";
+ compatible = "microchip,lan9691-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma AT91_XDMAC_DT_PERID(3)>,
};
trng: rng@e0048000 {
- compatible = "atmel,at91sam9g45-trng";
+ compatible = "microchip,lan9691-trng", "atmel,at91sam9g45-trng";
reg = <0xe0048000 0x100>;
clocks = <&fabric_clk>;
status = "disabled";
};
aes: crypto@e004c000 {
- compatible = "atmel,at91sam9g46-aes";
+ compatible = "microchip,lan9691-aes", "atmel,at91sam9g46-aes";
reg = <0xe004c000 0x100>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma AT91_XDMAC_DT_PERID(12)>,
};
flx2: flexcom@e0060000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,lan9691-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe0060000 0x100>;
+ ranges = <0x0 0xe0060000 0x800>;
clocks = <&clks GCK_ID_FLEXCOM2>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0xe0060000 0x800>;
status = "disabled";
usart2: serial@200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "microchip,lan9691-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
- atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma AT91_XDMAC_DT_PERID(7)>,
<&dma AT91_XDMAC_DT_PERID(6)>;
clocks = <&fabric_clk>;
clock-names = "usart";
atmel,fifo-size = <32>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
status = "disabled";
};
spi2: spi@400 {
- compatible = "atmel,at91rm9200-spi";
+ compatible = "microchip,lan9691-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma AT91_XDMAC_DT_PERID(7)>,
dma-names = "tx", "rx";
clocks = <&fabric_clk>;
clock-names = "spi_clk";
- atmel,fifo-size = <32>;
#address-cells = <1>;
#size-cells = <0>;
+ atmel,fifo-size = <32>;
status = "disabled";
};
i2c2: i2c@600 {
- compatible = "microchip,sam9x60-i2c";
+ compatible = "microchip,lan9691-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&dma AT91_XDMAC_DT_PERID(7)>,
+ <&dma AT91_XDMAC_DT_PERID(6)>;
+ dma-names = "tx", "rx";
clocks = <&fabric_clk>;
#address-cells = <1>;
#size-cells = <0>;
};
flx3: flexcom@e0064000 {
- compatible = "atmel,sama5d2-flexcom";
+ compatible = "microchip,lan9691-flexcom", "atmel,sama5d2-flexcom";
reg = <0xe0064000 0x100>;
+ ranges = <0x0 0xe0064000 0x800>;
clocks = <&clks GCK_ID_FLEXCOM3>;
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0x0 0xe0064000 0x800>;
status = "disabled";
usart3: serial@200 {
- compatible = "atmel,at91sam9260-usart";
+ compatible = "microchip,lan9691-usart", "atmel,at91sam9260-usart";
reg = <0x200 0x200>;
- atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma AT91_XDMAC_DT_PERID(9)>,
<&dma AT91_XDMAC_DT_PERID(8)>;
clocks = <&fabric_clk>;
clock-names = "usart";
atmel,fifo-size = <32>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
status = "disabled";
};
spi3: spi@400 {
- compatible = "atmel,at91rm9200-spi";
+ compatible = "microchip,lan9691-spi", "atmel,at91rm9200-spi";
reg = <0x400 0x200>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma AT91_XDMAC_DT_PERID(9)>,
dma-names = "tx", "rx";
clocks = <&fabric_clk>;
clock-names = "spi_clk";
- atmel,fifo-size = <32>;
#address-cells = <1>;
#size-cells = <0>;
+ atmel,fifo-size = <32>;
status = "disabled";
};
i2c3: i2c@600 {
- compatible = "microchip,sam9x60-i2c";
+ compatible = "microchip,lan9691-i2c", "microchip,sam9x60-i2c";
reg = <0x600 0x200>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma AT91_XDMAC_DT_PERID(9)>,
};
dma: dma-controller@e0068000 {
- compatible = "microchip,sama7g5-dma";
+ compatible = "microchip,lan9691-dma", "microchip,sama7g5-dma";
reg = <0xe0068000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
dma-channels = <16>;
};
sha: crypto@e006c000 {
- compatible = "atmel,at91sam9g46-sha";
+ compatible = "microchip,lan9691-sha", "atmel,at91sam9g46-sha";
reg = <0xe006c000 0xec>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma AT91_XDMAC_DT_PERID(14)>;
clks: clock-controller@e00c00b4 {
compatible = "microchip,lan9691-gck";
+ reg = <0xe00c00b4 0x30>, <0xe00c0308 0x4>;
#clock-cells = <1>;
clocks = <&cpu_clk>, <&ddr_clk>, <&fx100_clk>;
clock-names = "cpu", "ddr", "sys";
- reg = <0xe00c00b4 0x30>, <0xe00c0308 0x4>;
};
qspi0: spi@e0804000 {
};
reset: reset-controller@e201000c {
- compatible = "microchip,lan9691-switch-reset", "microchip,lan966x-switch-reset";
+ compatible = "microchip,lan9691-switch-reset",
+ "microchip,lan966x-switch-reset";
reg = <0xe201000c 0x4>;
reg-names = "gcb";
#reset-cells = <1>;
};
mdio0: mdio@e20101a8 {
- compatible = "mscc,ocelot-miim";
+ compatible = "microchip,lan9691-miim", "mscc,ocelot-miim";
+ reg = <0xe20101a8 0x24>;
#address-cells = <1>;
#size-cells = <0>;
- reg = <0xe20101a8 0x24>;
clocks = <&fx100_clk>;
status = "disabled";
};
mdio1: mdio@e20101cc {
- compatible = "mscc,ocelot-miim";
+ compatible = "microchip,lan9691-miim", "mscc,ocelot-miim";
+ reg = <0xe20101cc 0x24>;
#address-cells = <1>;
#size-cells = <0>;
- reg = <0xe20101cc 0x24>;
clocks = <&fx100_clk>;
status = "disabled";
};
sgpio: gpio@e2010230 {
- compatible = "microchip,sparx5-sgpio";
+ compatible = "microchip,lan9691-sgpio", "microchip,sparx5-sgpio";
reg = <0xe2010230 0x118>;
clocks = <&fx100_clk>;
resets = <&reset 0>;
status = "disabled";
sgpio_in: gpio@0 {
- compatible = "microchip,sparx5-sgpio-bank";
+ compatible = "microchip,lan9691-sgpio-bank",
+ "microchip,sparx5-sgpio-bank";
reg = <0>;
gpio-controller;
#gpio-cells = <3>;
};
sgpio_out: gpio@1 {
- compatible = "microchip,sparx5-sgpio-bank";
+ compatible = "microchip,lan9691-sgpio-bank",
+ "microchip,sparx5-sgpio-bank";
reg = <1>;
gpio-controller;
#gpio-cells = <3>;
};
tmon: hwmon@e2020100 {
- compatible = "microchip,sparx5-temp";
+ compatible = "microchip,lan9691-temp", "microchip,sparx5-temp";
reg = <0xe2020100 0xc>;
clocks = <&fx100_clk>;
#thermal-sensor-cells = <0>;
serdes: serdes@e3410000 {
compatible = "microchip,lan9691-serdes";
+ reg = <0xe3410000 0x150000>;
#phy-cells = <1>;
clocks = <&fabric_clk>;
- reg = <0xe3410000 0x150000>;
};
gic: interrupt-controller@e8c11000 {
compatible = "arm,gic-400";
- #interrupt-cells = <3>;
- interrupt-controller;
reg = <0xe8c11000 0x1000>, /* Distributor GICD_ */
<0xe8c12000 0x2000>, /* CPU interface GICC_ */
<0xe8c14000 0x2000>, /* Virt interface control */
<0xe8c16000 0x2000>; /* Virt CPU interface */
+ #interrupt-cells = <3>;
+ interrupt-controller;
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
};
};
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2025 Microchip Technology Inc. and its subsidiaries.
+ */
+
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
-#include "lan969x.dtsi"
+#include "lan9691.dtsi"
/ {
model = "Microchip EV23X71A";
- compatible = "microchip,ev23x71a", "microchip,lan969x";
+ compatible = "microchip,ev23x71a", "microchip,lan9696", "microchip,lan9691";
aliases {
serial0 = &usart0;
- led-boot = &led_status;
- led-failsafe = &led_status;
- led-running = &led_status;
- led-upgrade = &led_status;
};
chosen {
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&i2c3>;
-
- mux-gpios = <&sgpio_out 0 1 GPIO_ACTIVE_HIGH
- &sgpio_out 0 2 GPIO_ACTIVE_HIGH
- &sgpio_out 0 3 GPIO_ACTIVE_HIGH>;
idle-state = <0x8>;
+ mux-gpios = <&sgpio_out 0 1 GPIO_ACTIVE_HIGH>,
+ <&sgpio_out 0 2 GPIO_ACTIVE_HIGH>,
+ <&sgpio_out 0 3 GPIO_ACTIVE_HIGH>;
+ settle-time-us = <100>;
i2c_sfp0: i2c@0 {
reg = <0x0>;
leds {
compatible = "gpio-leds";
- led_status: led-status {
+ led-status {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_STATUS;
gpios = <&gpio 61 GPIO_ACTIVE_LOW>;
mux-controller {
compatible = "gpio-mux";
#mux-control-cells = <0>;
-
mux-gpios = <&sgpio_out 1 2 GPIO_ACTIVE_LOW>,
<&sgpio_out 1 3 GPIO_ACTIVE_LOW>;
};
};
};
-&flx0 {
- atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
- status = "okay";
-};
-
-&usart0 {
- pinctrl-0 = <&fc0_pins>;
- pinctrl-names = "default";
- status = "okay";
-};
-
-&flx2 {
- atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
- status = "okay";
-};
-
-&spi2 {
- pinctrl-0 = <&fc2_pins>;
- pinctrl-names = "default";
- cs-gpios = <&gpio 63 GPIO_ACTIVE_LOW>;
- status = "okay";
-};
-
-&flx3 {
- atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
- status = "okay";
-};
-
-&i2c3 {
- pinctrl-0 = <&fc3_pins>;
- pinctrl-names = "default";
- i2c-analog-filter;
- i2c-digital-filter;
- i2c-digital-filter-width-ns = <35>;
- i2c-sda-hold-time-ns = <1500>;
- status = "okay";
-};
-
&gpio {
emmc_sd_pins: emmc-sd-pins {
/* eMMC_SD - CMD, CLK, D0, D1, D2, D3, D4, D5, D6, D7, RSTN */
usb_ulpi_pins: usb-ulpi-pins {
pins = "GPIO_30", "GPIO_31", "GPIO_32", "GPIO_33",
- "GPIO_34", "GPIO_35", "GPIO_36", "GPIO_37",
- "GPIO_38", "GPIO_39", "GPIO_40", "GPIO_41";
+ "GPIO_34", "GPIO_35", "GPIO_36", "GPIO_37",
+ "GPIO_38", "GPIO_39", "GPIO_40", "GPIO_41";
function = "usb_ulpi";
};
};
};
-&qspi0 {
+&flx0 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
status = "okay";
+};
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <100000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- spi-tx-bus-width = <1>;
- spi-rx-bus-width = <4>;
- m25p,fast-read;
- };
+&flx2 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+ status = "okay";
};
-&sdmmc0 {
- pinctrl-0 = <&emmc_sd_pins>;
- pinctrl-names = "default";
- max-frequency = <100000000>;
- bus-width = <8>;
- mmc-ddr-1_8v;
- mmc-hs200-1_8v;
- non-removable;
- disable-wp;
+&flx3 {
+ atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
status = "okay";
};
-&tmon {
- pinctrl-0 = <&fan_pins>;
+&i2c3 {
+ pinctrl-0 = <&fc3_pins>;
pinctrl-names = "default";
+ i2c-analog-filter;
+ i2c-digital-filter;
+ i2c-digital-filter-width-ns = <35>;
+ i2c-sda-hold-time-ns = <1500>;
+ status = "okay";
};
&mdio0 {
};
};
+&otp {
+ nvmem-layout {
+ compatible = "microchip,otp-layout";
+
+ base_mac_address: base-mac-address {
+ #nvmem-cell-cells = <1>;
+ };
+ };
+};
+
+&qspi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <100000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ m25p,fast-read;
+ };
+};
+
+&sdmmc0 {
+ pinctrl-0 = <&emmc_sd_pins>;
+ pinctrl-names = "default";
+ max-frequency = <100000000>;
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ non-removable;
+ disable-wp;
+ status = "okay";
+};
+
&serdes {
status = "okay";
};
&sgpio {
pinctrl-0 = <&sgpio_pins>;
pinctrl-names = "default";
-
microchip,sgpio-port-ranges = <0 1>, <6 9>;
status = "okay";
};
};
+&spi2 {
+ pinctrl-0 = <&fc2_pins>;
+ pinctrl-names = "default";
+ cs-gpios = <&gpio 63 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&switch {
pinctrl-0 = <&ptp_out_pins>, <&ptp_ext_pins>;
pinctrl-names = "default";
-
+ nvmem-cells = <&base_mac_address 0>;
+ nvmem-cell-names = "mac-address";
status = "okay";
+
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
port0: port@0 {
reg = <0>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy4>;
phy-mode = "qsgmii";
phys = <&serdes 0>;
+ microchip,bandwidth = <1000>;
};
port1: port@1 {
reg = <1>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy5>;
phy-mode = "qsgmii";
phys = <&serdes 0>;
+ microchip,bandwidth = <1000>;
};
port2: port@2 {
reg = <2>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy6>;
phy-mode = "qsgmii";
phys = <&serdes 0>;
+ microchip,bandwidth = <1000>;
};
port3: port@3 {
reg = <3>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy7>;
phy-mode = "qsgmii";
phys = <&serdes 0>;
+ microchip,bandwidth = <1000>;
};
port4: port@4 {
reg = <4>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy8>;
phy-mode = "qsgmii";
phys = <&serdes 1>;
+ microchip,bandwidth = <1000>;
};
port5: port@5 {
reg = <5>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy9>;
phy-mode = "qsgmii";
phys = <&serdes 1>;
+ microchip,bandwidth = <1000>;
};
port6: port@6 {
reg = <6>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy10>;
phy-mode = "qsgmii";
phys = <&serdes 1>;
+ microchip,bandwidth = <1000>;
};
port7: port@7 {
reg = <7>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy11>;
phy-mode = "qsgmii";
phys = <&serdes 1>;
+ microchip,bandwidth = <1000>;
};
port8: port@8 {
reg = <8>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy12>;
phy-mode = "qsgmii";
phys = <&serdes 2>;
+ microchip,bandwidth = <1000>;
};
port9: port@9 {
reg = <9>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy13>;
phy-mode = "qsgmii";
phys = <&serdes 2>;
+ microchip,bandwidth = <1000>;
};
port10: port@10 {
reg = <10>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy14>;
phy-mode = "qsgmii";
phys = <&serdes 2>;
+ microchip,bandwidth = <1000>;
};
port11: port@11 {
reg = <11>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy15>;
phy-mode = "qsgmii";
phys = <&serdes 2>;
+ microchip,bandwidth = <1000>;
};
port12: port@12 {
reg = <12>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy16>;
phy-mode = "qsgmii";
phys = <&serdes 3>;
+ microchip,bandwidth = <1000>;
};
port13: port@13 {
reg = <13>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy17>;
phy-mode = "qsgmii";
phys = <&serdes 3>;
+ microchip,bandwidth = <1000>;
};
port14: port@14 {
reg = <14>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy18>;
phy-mode = "qsgmii";
phys = <&serdes 3>;
+ microchip,bandwidth = <1000>;
};
port15: port@15 {
reg = <15>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy19>;
phy-mode = "qsgmii";
phys = <&serdes 3>;
+ microchip,bandwidth = <1000>;
};
port16: port@16 {
reg = <16>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy20>;
phy-mode = "qsgmii";
phys = <&serdes 4>;
+ microchip,bandwidth = <1000>;
};
port17: port@17 {
reg = <17>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy21>;
phy-mode = "qsgmii";
phys = <&serdes 4>;
+ microchip,bandwidth = <1000>;
};
port18: port@18 {
reg = <18>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy22>;
phy-mode = "qsgmii";
phys = <&serdes 4>;
+ microchip,bandwidth = <1000>;
};
port19: port@19 {
reg = <19>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy23>;
phy-mode = "qsgmii";
phys = <&serdes 4>;
+ microchip,bandwidth = <1000>;
};
port20: port@20 {
reg = <20>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy24>;
phy-mode = "qsgmii";
phys = <&serdes 5>;
+ microchip,bandwidth = <1000>;
};
port21: port@21 {
reg = <21>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy25>;
phy-mode = "qsgmii";
phys = <&serdes 5>;
+ microchip,bandwidth = <1000>;
};
port22: port@22 {
reg = <22>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy26>;
phy-mode = "qsgmii";
phys = <&serdes 5>;
+ microchip,bandwidth = <1000>;
};
port23: port@23 {
reg = <23>;
- microchip,bandwidth = <1000>;
phy-handle = <&phy27>;
phy-mode = "qsgmii";
phys = <&serdes 5>;
+ microchip,bandwidth = <1000>;
};
port24: port@24 {
reg = <24>;
- microchip,bandwidth = <10000>;
phys = <&serdes 6>;
phy-mode = "10gbase-r";
sfp = <&sfp0>;
- microchip,sd-sgpio = <24>;
managed = "in-band-status";
+ microchip,bandwidth = <10000>;
+ microchip,sd-sgpio = <24>;
};
port25: port@25 {
reg = <25>;
- microchip,bandwidth = <10000>;
phys = <&serdes 7>;
phy-mode = "10gbase-r";
sfp = <&sfp1>;
- microchip,sd-sgpio = <28>;
managed = "in-band-status";
+ microchip,bandwidth = <10000>;
+ microchip,sd-sgpio = <28>;
};
port26: port@26 {
reg = <26>;
- microchip,bandwidth = <10000>;
phys = <&serdes 8>;
phy-mode = "10gbase-r";
sfp = <&sfp2>;
- microchip,sd-sgpio = <32>;
managed = "in-band-status";
+ microchip,bandwidth = <10000>;
+ microchip,sd-sgpio = <32>;
};
port27: port@27 {
reg = <27>;
- microchip,bandwidth = <10000>;
phys = <&serdes 9>;
phy-mode = "10gbase-r";
sfp = <&sfp3>;
- microchip,sd-sgpio = <36>;
managed = "in-band-status";
+ microchip,bandwidth = <10000>;
+ microchip,sd-sgpio = <36>;
};
port29: port@29 {
reg = <29>;
- microchip,bandwidth = <1000>;
phys = <&serdes 11>;
phy-handle = <&phy3>;
- phy-mode = "rgmii";
- rx-internal-delay-ps = <1000>;
- tx-internal-delay-ps = <1000>;
+ phy-mode = "rgmii-id";
+ microchip,bandwidth = <1000>;
};
};
};
-&usb {
+&tmon {
+ pinctrl-0 = <&fan_pins>;
+ pinctrl-names = "default";
+};
+
+&usart0 {
+ pinctrl-0 = <&fc0_pins>;
+ pinctrl-names = "default";
status = "okay";
+};
+
+&usb {
pinctrl-0 = <&usb_ulpi_pins>, <&usb_rst_pins>, <&usb_over_pins>, <&usb_power_pins>;
pinctrl-names = "default";
+ status = "okay";
};
projects / thirdparty / openwrt.git / commitdiff
