return 1
}
-# wait until the next key event for zone $1 on server $2.
-wait_for_next_key_event () {
- wait_for_log 10 "zone ${1}/IN: next key event:" "${2}/named.run" || return 1
- return 0
+# wait until notifies for zone $1 are sent by server $2. This is an indication
+# that the zone is signed with the active keys, and the changes have been
+# committed.
+wait_for_notifies () {
+ wait_for_log 10 "zone ${1}/IN: sending notifies" "${2}/named.run" || return 1
}
freq() {
awk='$4 == "RRSIG" && $5 == "DNSKEY" { printf "%05u\n", $11 }'
id=`awk "${awk}" dig.out.ns3.test$n`
-$SETTIME -D now+5 ns3/Kinacksk3.example.+007+${id} > settime.out.test$n
-$RNDCCMD 10.53.0.3 loadkeys inacksk3.example 2>&1 | sed 's/^/ns3 /' | cat_i
+$SETTIME -D now+5 ns3/Kinacksk3.example.+007+${id} > settime.out.test$n || ret=1
+($RNDCCMD 10.53.0.3 loadkeys inacksk3.example 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
END {print count}' dig.out.ns3.test$n`
test $count -eq 3 || ret=1
id=`awk '$4 == "RRSIG" && $5 == "CNAME" { printf "%05u\n", $11 }' dig.out.ns3.test$n`
-$SETTIME -D now+5 ns3/Kinaczsk3.example.+007+${id} > settime.out.test$n
-$RNDCCMD 10.53.0.3 loadkeys inaczsk3.example 2>&1 | sed 's/^/ns3 /' | cat_i
+$SETTIME -D now+5 ns3/Kinaczsk3.example.+007+${id} > settime.out.test$n || ret=1
+($RNDCCMD 10.53.0.3 loadkeys inaczsk3.example 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "signing preset nsec3 zone"
zsk=`cat autozsk.key`
ksk=`cat autoksk.key`
-$SETTIME -K ns3 -P now -A now $zsk > settime.out.test$n.zsk
-$SETTIME -K ns3 -P now -A now $ksk > settime.out.test$n.ksk
-$RNDCCMD 10.53.0.3 loadkeys autonsec3.example. 2>&1 | sed 's/^/ns3 /' | cat_i
+$SETTIME -K ns3 -P now -A now $zsk > settime.out.test$n.zsk || ret=1
+$SETTIME -K ns3 -P now -A now $ksk > settime.out.test$n.ksk || ret=1
+($RNDCCMD 10.53.0.3 loadkeys autonsec3.example. 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1
echo_i "waiting for changes to take effect"
sleep 3
# Send rndc sync command to ns1, ns2 and ns3, to force the dynamically
# signed zones to be dumped to their zone files
echo_i "dumping zone files"
-$RNDCCMD 10.53.0.1 sync 2>&1 | sed 's/^/ns1 /' | cat_i
-$RNDCCMD 10.53.0.2 sync 2>&1 | sed 's/^/ns2 /' | cat_i
-$RNDCCMD 10.53.0.3 sync 2>&1 | sed 's/^/ns3 /' | cat_i
+($RNDCCMD 10.53.0.1 sync 2>&1 | sed 's/^/ns1 /' | cat_i) || ret=1
+($RNDCCMD 10.53.0.2 sync 2>&1 | sed 's/^/ns2 /' | cat_i) || ret=1
+($RNDCCMD 10.53.0.3 sync 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1
now="$(TZ=UTC date +%Y%m%d%H%M%S)"
check_expiry() (
ret=0
$DIG $DIGOPTS +tcp +noall +answer dnskey ttl1.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
[ -s dig.out.ns3.test$n ] || ret=1
-awk 'BEGIN {r=0} $2 != 300 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1 | cat_i
+(awk 'BEGIN {r=0} $2 != 300 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n | cat_i) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +tcp +noall +answer dnskey ttl2.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
[ -s dig.out.ns3.test$n ] || ret=1
-awk 'BEGIN {r=0} $2 != 60 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1 | cat_i
+(awk 'BEGIN {r=0} $2 != 60 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n | cat_i) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +tcp +noall +answer dnskey ttl3.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
[ -s dig.out.ns3.test$n ] || ret=1
-awk 'BEGIN {r=0} $2 != 30 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1 | cat_i
+(awk 'BEGIN {r=0} $2 != 30 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n | cat_i) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
ret=0
$DIG $DIGOPTS +tcp +noall +answer dnskey ttl4.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
[ -s dig.out.ns3.test$n ] || ret=1
-awk 'BEGIN {r=0} $2 != 30 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n || ret=1 | cat_i
+(awk 'BEGIN {r=0} $2 != 30 {r=1; print "found TTL " $2} END {exit r}' dig.out.ns3.test$n | cat_i) || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "checking secure-to-insecure transition, scheduled ($n)"
ret=0
file="ns3/`cat del1.key`.key"
-$SETTIME -I now -D now $file > settime.out.test$n.1
+$SETTIME -I now -D now $file > settime.out.test$n.1 || ret=1
file="ns3/`cat del2.key`.key"
-$SETTIME -I now -D now $file > settime.out.test$n.2
-$RNDCCMD 10.53.0.3 sign secure-to-insecure2.example. 2>&1 | sed 's/^/ns3 /' | cat_i
+$SETTIME -I now -D now $file > settime.out.test$n.2 || ret=1
+($RNDCCMD 10.53.0.3 sign secure-to-insecure2.example. 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1
for i in 0 1 2 3 4 5 6 7 8 9; do
ret=0
$DIG $DIGOPTS axfr secure-to-insecure2.example @10.53.0.3 > dig.out.ns3.test$n || ret=1
# Create DNSSEC keys in the zone directory.
$KEYGEN -a rsasha1 -3 -q -K ns3 jitter.nsec3.example > /dev/null
# Trigger zone signing.
-$RNDCCMD 10.53.0.3 sign jitter.nsec3.example. 2>&1 | sed 's/^/ns3 /' | cat_i
+($RNDCCMD 10.53.0.3 sign jitter.nsec3.example. 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1
# Wait until zone has been signed.
check_if_nsec3param_exists() {
$DIG $DIGOPTS NSEC3PARAM jitter.nsec3.example @10.53.0.3 > dig.out.ns3.1.test$n || return 1
$KEYGEN -a rsasha1 -3 -q -K ns3 -P 0 -A +6d -I +38d -D +45d prepub.example > /dev/null
-$RNDCCMD 10.53.0.3 sign prepub.example 2>&1 | sed 's/^/ns1 /' | cat_i
+($RNDCCMD 10.53.0.3 sign prepub.example 2>&1 | sed 's/^/ns1 /' | cat_i) || ret=1
newserial=$oldserial
try=0
while [ $oldserial -eq $newserial -a $try -lt 42 ]
oldid=$(keyfile_to_key_id "$(cat active.key)")
newfile=`cat standby.key`
newid=$(keyfile_to_key_id "$(cat standby.key)")
-$SETTIME -K ns1 -I now+2s -D now+25 $oldfile > settime.out.test$n.1
-$SETTIME -K ns1 -i 0 -S $oldfile $newfile > settime.out.test$n.2
+$SETTIME -K ns1 -I now+2s -D now+25 $oldfile > settime.out.test$n.1 || ret=1
+$SETTIME -K ns1 -i 0 -S $oldfile $newfile > settime.out.test$n.2 || ret=1
# note previous zone serial number
oldserial=`$DIG $DIGOPTS +short soa . @10.53.0.1 | awk '{print $3}'`
-$RNDCCMD 10.53.0.1 loadkeys . 2>&1 | sed 's/^/ns1 /' | cat_i
+($RNDCCMD 10.53.0.1 loadkeys . 2>&1 | sed 's/^/ns1 /' | cat_i) || ret=1
sleep 4
echo_i "revoking key to duplicated key ID"
-$SETTIME -R now -K ns2 Kbar.+005+30676.key > settime.out.test$n.3
+$SETTIME -R now -K ns2 Kbar.+005+30676.key > settime.out.test$n.3 || ret=1
-$RNDCCMD 10.53.0.2 loadkeys bar. 2>&1 | sed 's/^/ns2 /' | cat_i
+($RNDCCMD 10.53.0.2 loadkeys bar. 2>&1 | sed 's/^/ns2 /' | cat_i) || ret=1
echo_i "waiting for changes to take effect"
sleep 5
status=`expr $status + $ret`
echo_i "forcing full sign"
-$RNDCCMD 10.53.0.1 sign . 2>&1 | sed 's/^/ns1 /' | cat_i
+($RNDCCMD 10.53.0.1 sign . 2>&1 | sed 's/^/ns1 /' | cat_i) || ret=1
echo_i "waiting for change to take effect"
sleep 5
echo_i "checking scheduled key publication, not activation ($n)"
ret=0
-# Ensure initial reconfiguring zone keys event has passed.
-wait_for_next_key_event "delay.example" "ns3" || ret=1
-$SETTIME -K ns3 -P now+3s -A none $zsk > settime.out.test$n.zsk
-$SETTIME -K ns3 -P now+3s -A none $ksk > settime.out.test$n.ksk
-$RNDCCMD 10.53.0.3 loadkeys delay.example. 2>&1 | sed 's/^/ns2 /' | cat_i
+# Ensure initial zone is loaded.
+wait_for_notifies "delay.example" "ns3" || ret=1
+$SETTIME -K ns3 -P now+3s -A none $zsk > settime.out.test$n.zsk || ret=1
+$SETTIME -K ns3 -P now+3s -A none $ksk > settime.out.test$n.ksk || ret=1
+($RNDCCMD 10.53.0.3 loadkeys delay.example. 2>&1 | sed 's/^/ns2 /' | cat_i) || ret=1
echo_i "waiting for changes to take effect"
sleep 3
-wait_for_next_key_event "delay.example" "ns3" || ret=1
+wait_for_notifies "delay.example" "ns3" || ret=1
$DIG $DIGOPTS +noall +answer dnskey delay.example. @10.53.0.3 > dig.out.ns3.test$n || ret=1
# DNSKEY expected:
echo_i "checking scheduled key activation ($n)"
ret=0
-$SETTIME -K ns3 -A now+3s $zsk > settime.out.test$n.zsk
-$SETTIME -K ns3 -A now+3s $ksk > settime.out.test$n.ksk
-$RNDCCMD 10.53.0.3 loadkeys delay.example. 2>&1 | sed 's/^/ns2 /' | cat_i
+$SETTIME -K ns3 -A now+3s $zsk > settime.out.test$n.zsk || ret=1
+$SETTIME -K ns3 -A now+3s $ksk > settime.out.test$n.ksk || ret=1
+($RNDCCMD 10.53.0.3 loadkeys delay.example. 2>&1 | sed 's/^/ns2 /' | cat_i) || ret=1
echo_i "waiting for changes to take effect"
sleep 3
-wait_for_next_key_event "delay.example" "ns3" || ret=1
-
+wait_for_notifies "delay.example" "ns3" || ret=1
$DIG $DIGOPTS +noall +answer dnskey delay.example. @10.53.0.3 > dig.out.ns3.1.test$n || ret=1
# DNSKEY expected:
awk 'BEGIN {r=1} $4=="DNSKEY" {r=0} END {exit r}' dig.out.ns3.1.test$n || ret=1
echo_i "forcing full sign with unreadable keys ($n)"
ret=0
chmod 0 ns1/K.+*+*.key ns1/K.+*+*.private || ret=1
-$RNDCCMD 10.53.0.1 sign . 2>&1 | sed 's/^/ns1 /' | cat_i
+($RNDCCMD 10.53.0.1 sign . 2>&1 | sed 's/^/ns1 /' | cat_i) || ret=1
$DIG $DIGOPTS . @10.53.0.1 dnskey > dig.out.ns1.test$n || ret=1
grep "status: NOERROR" dig.out.ns1.test$n > /dev/null || ret=1
n=`expr $n + 1`
echo_i "test turning on auto-dnssec during reconfig ($n)"
ret=0
# first create a zone that doesn't have auto-dnssec
-$RNDCCMD 10.53.0.3 addzone reconf.example '{ type master; file "reconf.example.db"; };' 2>&1 | sed 's/^/ns3 /' | cat_i
+($RNDCCMD 10.53.0.3 addzone reconf.example '{ type master; file "reconf.example.db"; };' 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1
rekey_calls=`grep "zone reconf.example.*next key event" ns3/named.run | wc -l`
[ "$rekey_calls" -eq 0 ] || ret=1
# ...then we add auto-dnssec and reconfigure
-$RNDCCMD 10.53.0.3 modzone reconf.example '{ type master; file "reconf.example.db"; allow-update { any; }; auto-dnssec maintain; };' 2>&1 | sed 's/^/ns3 /' | cat_i
+($RNDCCMD 10.53.0.3 modzone reconf.example '{ type master; file "reconf.example.db"; allow-update { any; }; auto-dnssec maintain; };' 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1
rndc_reconfig ns3 10.53.0.3
for i in 0 1 2 3 4 5 6 7 8 9; do
lret=0
status=`expr $status + $ret`
echo_i "setting CDS and CDNSKEY deletion times and calling 'rndc loadkeys'"
-$SETTIME -D sync now `cat sync.key` > settime.out.test$n
-$RNDCCMD 10.53.0.3 loadkeys sync.example | sed 's/^/ns3 /' | cat_i
+$SETTIME -D sync now `cat sync.key` > settime.out.test$n || ret=1
+($RNDCCMD 10.53.0.3 loadkeys sync.example | sed 's/^/ns3 /' | cat_i) || ret=1
echo_i "checking that the CDS and CDNSKEY are deleted ($n)"
ret=0
echo_i "check that dnssec-settime -p Dsync works ($n)"
ret=0
-$SETTIME -p Dsync `cat sync.key` > settime.out.test$n || ret=0
-grep "SYNC Delete:" settime.out.test$n >/dev/null || ret=0
+$SETTIME -p Dsync `cat sync.key` > settime.out.test$n || ret=1
+grep "SYNC Delete:" settime.out.test$n >/dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
echo_i "check that dnssec-settime -p Psync works ($n)"
ret=0
-$SETTIME -p Psync `cat sync.key` > settime.out.test$n || ret=0
-grep "SYNC Publish:" settime.out.test$n >/dev/null || ret=0
+$SETTIME -p Psync `cat sync.key` > settime.out.test$n || ret=1
+grep "SYNC Publish:" settime.out.test$n >/dev/null || ret=1
n=`expr $n + 1`
if [ $ret != 0 ]; then echo_i "failed"; fi
status=`expr $status + $ret`
file="ns3/`cat delzsk.key`.key"
$SETTIME -D now-1h $file > settime.out.test$n || ret=1
# Trigger removal of the inactive ZSK and wait until its completion.
-$RNDCCMD 10.53.0.3 loadkeys delzsk.example 2>&1 | sed 's/^/ns3 /' | cat_i
+($RNDCCMD 10.53.0.3 loadkeys delzsk.example 2>&1 | sed 's/^/ns3 /' | cat_i) || ret=1
for i in 0 1 2 3 4 5 6 7 8 9; do
_ret=1
$RNDCCMD 10.53.0.3 signing -list delzsk.example > signing.out.3.test$n 2>&1
projects / thirdparty / bind9.git / commitdiff
