VIRTCHNL2_OP_PTP_ADJ_DEV_CLK_TIME = 547,
VIRTCHNL2_OP_PTP_GET_VPORT_TX_TSTAMP_CAPS = 548,
VIRTCHNL2_OP_GET_LAN_MEMORY_REGIONS = 549,
+ /* Opcode 550 is reserved */
+ VIRTCHNL2_OP_ADD_FLOW_RULE = 551,
+ VIRTCHNL2_OP_GET_FLOW_RULE = 552,
+ VIRTCHNL2_OP_DEL_FLOW_RULE = 553,
};
/**
VIRTCHNL2_CAP_RDMA = BIT_ULL(0),
VIRTCHNL2_CAP_SRIOV = BIT_ULL(1),
VIRTCHNL2_CAP_MACFILTER = BIT_ULL(2),
- VIRTCHNL2_CAP_FLOW_DIRECTOR = BIT_ULL(3),
- /* Queue based scheduling using split queue model */
+ /* Other capability 3 is available
+ * Queue based scheduling using split queue model
+ */
VIRTCHNL2_CAP_SPLITQ_QSCHED = BIT_ULL(4),
VIRTCHNL2_CAP_CRC = BIT_ULL(5),
VIRTCHNL2_CAP_ADQ = BIT_ULL(6),
/* EDT: Earliest Departure Time capability used for Timing Wheel */
VIRTCHNL2_CAP_EDT = BIT_ULL(14),
VIRTCHNL2_CAP_ADV_RSS = BIT_ULL(15),
- VIRTCHNL2_CAP_FDIR = BIT_ULL(16),
+ /* Other capability 16 is available */
VIRTCHNL2_CAP_RX_FLEX_DESC = BIT_ULL(17),
VIRTCHNL2_CAP_PTYPE = BIT_ULL(18),
VIRTCHNL2_CAP_LOOPBACK = BIT_ULL(19),
- /* Other capability 20-21 is reserved */
+ /* Other capability 20 is reserved */
+ VIRTCHNL2_CAP_FLOW_STEER = BIT_ULL(21),
VIRTCHNL2_CAP_LAN_MEMORY_REGIONS = BIT_ULL(22),
/* this must be the last capability */
VIRTCHNL2_CAP_OEM = BIT_ULL(63),
};
+/**
+ * enum virtchnl2_action_types - Available actions for sideband flow steering
+ * @VIRTCHNL2_ACTION_DROP: Drop the packet
+ * @VIRTCHNL2_ACTION_PASSTHRU: Forward the packet to the next classifier/stage
+ * @VIRTCHNL2_ACTION_QUEUE: Forward the packet to a receive queue
+ * @VIRTCHNL2_ACTION_Q_GROUP: Forward the packet to a receive queue group
+ * @VIRTCHNL2_ACTION_MARK: Mark the packet with specific marker value
+ * @VIRTCHNL2_ACTION_COUNT: Increment the corresponding counter
+ */
+
+enum virtchnl2_action_types {
+ VIRTCHNL2_ACTION_DROP = BIT(0),
+ VIRTCHNL2_ACTION_PASSTHRU = BIT(1),
+ VIRTCHNL2_ACTION_QUEUE = BIT(2),
+ VIRTCHNL2_ACTION_Q_GROUP = BIT(3),
+ VIRTCHNL2_ACTION_MARK = BIT(4),
+ VIRTCHNL2_ACTION_COUNT = BIT(5),
+};
+
/* underlying device type */
enum virtchl2_device_type {
VIRTCHNL2_MEV_DEVICE = 0,
/**
* enum virtchnl2_vport_flags - Vport flags that indicate vport capabilities.
* @VIRTCHNL2_VPORT_UPLINK_PORT: Representatives of underlying physical ports
+ * @VIRTCHNL2_VPORT_INLINE_FLOW_STEER: Inline flow steering enabled
+ * @VIRTCHNL2_VPORT_INLINE_FLOW_STEER_RXQ: Inline flow steering enabled
+ * with explicit Rx queue action
+ * @VIRTCHNL2_VPORT_SIDEBAND_FLOW_STEER: Sideband flow steering enabled
* @VIRTCHNL2_VPORT_ENABLE_RDMA: RDMA is enabled for this vport
*/
enum virtchnl2_vport_flags {
- VIRTCHNL2_VPORT_UPLINK_PORT = BIT(0),
- /* VIRTCHNL2_VPORT_* bits [1:3] rsvd */
+ VIRTCHNL2_VPORT_UPLINK_PORT = BIT(0),
+ VIRTCHNL2_VPORT_INLINE_FLOW_STEER = BIT(1),
+ VIRTCHNL2_VPORT_INLINE_FLOW_STEER_RXQ = BIT(2),
+ VIRTCHNL2_VPORT_SIDEBAND_FLOW_STEER = BIT(3),
VIRTCHNL2_VPORT_ENABLE_RDMA = BIT(4),
};
* @rx_desc_ids: See VIRTCHNL2_RX_DESC_IDS definitions.
* @tx_desc_ids: See VIRTCHNL2_TX_DESC_IDS definitions.
* @pad1: Padding.
+ * @inline_flow_caps: Bit mask of supported inline-flow-steering
+ * flow types (See enum virtchnl2_flow_types)
+ * @sideband_flow_caps: Bit mask of supported sideband-flow-steering
+ * flow types (See enum virtchnl2_flow_types)
+ * @sideband_flow_actions: Bit mask of supported action types
+ * for sideband flow steering (See enum virtchnl2_action_types)
+ * @flow_steer_max_rules: Max rules allowed for inline and sideband
+ * flow steering combined
* @rss_algorithm: RSS algorithm.
* @rss_key_size: RSS key size.
* @rss_lut_size: RSS LUT size.
__le16 vport_flags;
__le64 rx_desc_ids;
__le64 tx_desc_ids;
- u8 pad1[72];
+ u8 pad1[48];
+ __le64 inline_flow_caps;
+ __le64 sideband_flow_caps;
+ __le32 sideband_flow_actions;
+ __le32 flow_steer_max_rules;
__le32 rss_algorithm;
__le16 rss_key_size;
__le16 rss_lut_size;
};
VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_get_lan_memory_regions);
+#define VIRTCHNL2_MAX_NUM_PROTO_HDRS 4
+#define VIRTCHNL2_MAX_SIZE_RAW_PACKET 256
+#define VIRTCHNL2_MAX_NUM_ACTIONS 8
+
+/**
+ * struct virtchnl2_proto_hdr - represent one protocol header
+ * @hdr_type: See enum virtchnl2_proto_hdr_type
+ * @pad: padding
+ * @buffer_spec: binary buffer based on header type.
+ * @buffer_mask: mask applied on buffer_spec.
+ *
+ * Structure to hold protocol headers based on hdr_type
+ */
+struct virtchnl2_proto_hdr {
+ __le32 hdr_type;
+ u8 pad[4];
+ u8 buffer_spec[64];
+ u8 buffer_mask[64];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(136, virtchnl2_proto_hdr);
+
+/**
+ * struct virtchnl2_proto_hdrs - struct to represent match criteria
+ * @tunnel_level: specify where protocol header(s) start from.
+ * must be 0 when sending a raw packet request.
+ * 0 - from the outer layer
+ * 1 - from the first inner layer
+ * 2 - from the second inner layer
+ * @pad: Padding bytes
+ * @count: total number of protocol headers in proto_hdr. 0 for raw packet.
+ * @proto_hdr: Array of protocol headers
+ * @raw: struct holding raw packet buffer when count is 0
+ */
+struct virtchnl2_proto_hdrs {
+ u8 tunnel_level;
+ u8 pad[3];
+ __le32 count;
+ union {
+ struct virtchnl2_proto_hdr
+ proto_hdr[VIRTCHNL2_MAX_NUM_PROTO_HDRS];
+ struct {
+ __le16 pkt_len;
+ u8 spec[VIRTCHNL2_MAX_SIZE_RAW_PACKET];
+ u8 mask[VIRTCHNL2_MAX_SIZE_RAW_PACKET];
+ } raw;
+ };
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(552, virtchnl2_proto_hdrs);
+
+/**
+ * struct virtchnl2_rule_action - struct representing single action for a flow
+ * @action_type: see enum virtchnl2_action_types
+ * @act_conf: union representing action depending on action_type.
+ * @act_conf.q_id: queue id to redirect the packets to.
+ * @act_conf.q_grp_id: queue group id to redirect the packets to.
+ * @act_conf.ctr_id: used for count action. If input value 0xFFFFFFFF control
+ * plane assigns a new counter and returns the counter ID to
+ * the driver. If input value is not 0xFFFFFFFF then it must
+ * be an existing counter given to the driver for an earlier
+ * flow. Then this flow will share the counter.
+ * @act_conf.mark_id: Value used to mark the packets. Used for mark action.
+ * @act_conf.reserved: Reserved for future use.
+ */
+struct virtchnl2_rule_action {
+ __le32 action_type;
+ union {
+ __le32 q_id;
+ __le32 q_grp_id;
+ __le32 ctr_id;
+ __le32 mark_id;
+ u8 reserved[8];
+ } act_conf;
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(12, virtchnl2_rule_action);
+
+/**
+ * struct virtchnl2_rule_action_set - struct representing multiple actions
+ * @count: number of valid actions in the action set of a rule
+ * @actions: array of struct virtchnl2_rule_action
+ */
+struct virtchnl2_rule_action_set {
+ /* action count must be less than VIRTCHNL2_MAX_NUM_ACTIONS */
+ __le32 count;
+ struct virtchnl2_rule_action actions[VIRTCHNL2_MAX_NUM_ACTIONS];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(100, virtchnl2_rule_action_set);
+
+/**
+ * struct virtchnl2_flow_rule - represent one flow steering rule
+ * @proto_hdrs: array of protocol header buffers representing match criteria
+ * @action_set: series of actions to be applied for given rule
+ * @priority: rule priority.
+ * @pad: padding for future extensions.
+ */
+struct virtchnl2_flow_rule {
+ struct virtchnl2_proto_hdrs proto_hdrs;
+ struct virtchnl2_rule_action_set action_set;
+ __le32 priority;
+ u8 pad[8];
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(664, virtchnl2_flow_rule);
+
+enum virtchnl2_flow_rule_status {
+ VIRTCHNL2_FLOW_RULE_SUCCESS = 1,
+ VIRTCHNL2_FLOW_RULE_NORESOURCE = 2,
+ VIRTCHNL2_FLOW_RULE_EXIST = 3,
+ VIRTCHNL2_FLOW_RULE_TIMEOUT = 4,
+ VIRTCHNL2_FLOW_RULE_FLOW_TYPE_NOT_SUPPORTED = 5,
+ VIRTCHNL2_FLOW_RULE_MATCH_KEY_NOT_SUPPORTED = 6,
+ VIRTCHNL2_FLOW_RULE_ACTION_NOT_SUPPORTED = 7,
+ VIRTCHNL2_FLOW_RULE_ACTION_COMBINATION_INVALID = 8,
+ VIRTCHNL2_FLOW_RULE_ACTION_DATA_INVALID = 9,
+ VIRTCHNL2_FLOW_RULE_NOT_ADDED = 10,
+};
+
+/**
+ * struct virtchnl2_flow_rule_info: structure representing single flow rule
+ * @rule_id: rule_id associated with the flow_rule.
+ * @rule_cfg: structure representing rule.
+ * @status: status of rule programming. See enum virtchnl2_flow_rule_status.
+ */
+struct virtchnl2_flow_rule_info {
+ __le32 rule_id;
+ struct virtchnl2_flow_rule rule_cfg;
+ __le32 status;
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(672, virtchnl2_flow_rule_info);
+
+/**
+ * struct virtchnl2_flow_rule_add_del - add/delete a flow steering rule
+ * @vport_id: vport id for which the rule is to be added or deleted.
+ * @count: Indicates number of rules to be added or deleted.
+ * @rule_info: Array of flow rules to be added or deleted.
+ *
+ * For VIRTCHNL2_OP_FLOW_RULE_ADD, rule_info contains list of rules to be
+ * added. If rule_id is 0xFFFFFFFF, then the rule is programmed and not cached.
+ *
+ * For VIRTCHNL2_OP_FLOW_RULE_DEL, there are two possibilities. The structure
+ * can contain either array of rule_ids or array of match keys to be deleted.
+ * When match keys are used the corresponding rule_ids must be 0xFFFFFFFF.
+ *
+ * status member of each rule indicates the result. Maximum of 6 rules can be
+ * added or deleted using this method. Driver has to retry in case of any
+ * failure of ADD or DEL opcode. CP doesn't retry in case of failure.
+ */
+struct virtchnl2_flow_rule_add_del {
+ __le32 vport_id;
+ __le32 count;
+ struct virtchnl2_flow_rule_info rule_info[] __counted_by_le(count);
+};
+VIRTCHNL2_CHECK_STRUCT_LEN(8, virtchnl2_flow_rule_add_del);
+
#endif /* _VIRTCHNL_2_H_ */
projects / thirdparty / linux.git / commitdiff
