216 = /dev/fujitsu/apanel Fujitsu/Siemens application panel
217 = /dev/ni/natmotn National Instruments Motion
218 = /dev/kchuid Inter-process chuid control
- 219 = /dev/modems/mwave MWave modem firmware upload
+ 219 =
220 = /dev/mptctl Message passing technology (MPT) control
221 = /dev/mvista/hssdsi Montavista PICMG hot swap system driver
222 = /dev/mvista/hasi Montavista PICMG high availability
0xCD 01 linux/reiserfs_fs.h Dead since 6.13
0xCE 01-02 uapi/linux/cxl_mem.h Compute Express Link Memory Devices
0xCF 02 fs/smb/client/cifs_ioctl.h
-0xDB 00-0F drivers/char/mwave/mwavepub.h
0xDD 00-3F ZFCP device driver see drivers/s390/scsi/
<mailto:aherrman@de.ibm.com>
0xE5 00-3F linux/fuse.h
To compile this driver as a module, choose M here: the
module will be called sonypi.
-config MWAVE
- tristate "ACP Modem (Mwave) support"
- depends on X86 && TTY
- select SERIAL_8250
- help
- The ACP modem (Mwave) for Linux is a WinModem. It is composed of a
- kernel driver and a user level application. Together these components
- support direct attachment to public switched telephone networks (PSTNs)
- and support selected world wide countries.
-
- This version of the ACP Modem driver supports the IBM Thinkpad 600E,
- 600, and 770 that include on board ACP modem hardware.
-
- The modem also supports the standard communications port interface
- (ttySx) and is compatible with the Hayes AT Command Set.
-
- The user level application needed to use this driver can be found at
- the IBM Linux Technology Center (LTC) web site:
- <http://www.ibm.com/linux/ltc/>.
-
- If you own one of the above IBM Thinkpads which has the Mwave chipset
- in it, say Y.
-
- To compile this driver as a module, choose M here: the
- module will be called mwave.
-
config SCx200_GPIO
tristate "NatSemi SCx200 GPIO Support"
depends on SCx200
obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
obj-$(CONFIG_TELCLOCK) += tlclk.o
-obj-$(CONFIG_MWAVE) += mwave/
obj-y += agp/
obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o
+++ /dev/null
-/*
-*
-* 3780i.c -- helper routines for the 3780i DSP
-*
-*
-* Written By: Mike Sullivan IBM Corporation
-*
-* Copyright (C) 1999 IBM Corporation
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation; either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* NO WARRANTY
-* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-* solely responsible for determining the appropriateness of using and
-* distributing the Program and assumes all risks associated with its
-* exercise of rights under this Agreement, including but not limited to
-* the risks and costs of program errors, damage to or loss of data,
-* programs or equipment, and unavailability or interruption of operations.
-*
-* DISCLAIMER OF LIABILITY
-* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*
-*
-* 10/23/2000 - Alpha Release
-* First release to the public
-*/
-
-#define pr_fmt(fmt) "3780i: " fmt
-
-#include <linux/kernel.h>
-#include <linux/unistd.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/bitops.h>
-#include <linux/sched.h> /* cond_resched() */
-
-#include <asm/io.h>
-#include <linux/uaccess.h>
-#include <asm/irq.h>
-#include "smapi.h"
-#include "mwavedd.h"
-#include "3780i.h"
-
-static DEFINE_SPINLOCK(dsp_lock);
-
-static void PaceMsaAccess(unsigned short usDspBaseIO)
-{
- cond_resched();
- udelay(100);
- cond_resched();
-}
-
-unsigned short dsp3780I_ReadMsaCfg(unsigned short usDspBaseIO,
- unsigned long ulMsaAddr)
-{
- unsigned long flags;
- unsigned short val;
-
- spin_lock_irqsave(&dsp_lock, flags);
- OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulMsaAddr);
- OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulMsaAddr >> 16));
- val = InWordDsp(DSP_MsaDataDSISHigh);
- spin_unlock_irqrestore(&dsp_lock, flags);
-
- return val;
-}
-
-void dsp3780I_WriteMsaCfg(unsigned short usDspBaseIO,
- unsigned long ulMsaAddr, unsigned short usValue)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dsp_lock, flags);
- OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulMsaAddr);
- OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulMsaAddr >> 16));
- OutWordDsp(DSP_MsaDataDSISHigh, usValue);
- spin_unlock_irqrestore(&dsp_lock, flags);
-}
-
-static void dsp3780I_WriteGenCfg(unsigned short usDspBaseIO, unsigned uIndex,
- unsigned char ucValue)
-{
- DSP_ISA_SLAVE_CONTROL rSlaveControl;
- DSP_ISA_SLAVE_CONTROL rSlaveControl_Save;
-
- MKBYTE(rSlaveControl) = InByteDsp(DSP_IsaSlaveControl);
-
- rSlaveControl_Save = rSlaveControl;
- rSlaveControl.ConfigMode = true;
-
- OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl));
- OutByteDsp(DSP_ConfigAddress, (unsigned char) uIndex);
- OutByteDsp(DSP_ConfigData, ucValue);
- OutByteDsp(DSP_IsaSlaveControl, MKBYTE(rSlaveControl_Save));
-}
-
-int dsp3780I_EnableDSP(struct dsp_3780i_config_settings *pSettings,
- unsigned short *pIrqMap,
- unsigned short *pDmaMap)
-{
- unsigned long flags;
- unsigned short usDspBaseIO = pSettings->usDspBaseIO;
- int i;
- DSP_UART_CFG_1 rUartCfg1;
- DSP_UART_CFG_2 rUartCfg2;
- DSP_HBRIDGE_CFG_1 rHBridgeCfg1;
- DSP_HBRIDGE_CFG_2 rHBridgeCfg2;
- DSP_BUSMASTER_CFG_1 rBusmasterCfg1;
- DSP_BUSMASTER_CFG_2 rBusmasterCfg2;
- DSP_ISA_PROT_CFG rIsaProtCfg;
- DSP_POWER_MGMT_CFG rPowerMgmtCfg;
- DSP_HBUS_TIMER_CFG rHBusTimerCfg;
- DSP_LBUS_TIMEOUT_DISABLE rLBusTimeoutDisable;
- DSP_CHIP_RESET rChipReset;
- DSP_CLOCK_CONTROL_1 rClockControl1;
- DSP_CLOCK_CONTROL_2 rClockControl2;
- DSP_ISA_SLAVE_CONTROL rSlaveControl;
- DSP_HBRIDGE_CONTROL rHBridgeControl;
- unsigned short tval;
-
- if (!pSettings->bDSPEnabled) {
- pr_err("%s: Error: DSP not enabled. Aborting.\n", __func__);
- return -EIO;
- }
-
- if (pSettings->bModemEnabled) {
- rUartCfg1.Reserved = rUartCfg2.Reserved = 0;
- rUartCfg1.IrqActiveLow = pSettings->bUartIrqActiveLow;
- rUartCfg1.IrqPulse = pSettings->bUartIrqPulse;
- rUartCfg1.Irq =
- (unsigned char) pIrqMap[pSettings->usUartIrq];
- switch (pSettings->usUartBaseIO) {
- case 0x03F8:
- rUartCfg1.BaseIO = 0;
- break;
- case 0x02F8:
- rUartCfg1.BaseIO = 1;
- break;
- case 0x03E8:
- rUartCfg1.BaseIO = 2;
- break;
- case 0x02E8:
- rUartCfg1.BaseIO = 3;
- break;
- }
- rUartCfg2.Enable = true;
- }
-
- rHBridgeCfg1.Reserved = rHBridgeCfg2.Reserved = 0;
- rHBridgeCfg1.IrqActiveLow = pSettings->bDspIrqActiveLow;
- rHBridgeCfg1.IrqPulse = pSettings->bDspIrqPulse;
- rHBridgeCfg1.Irq = (unsigned char) pIrqMap[pSettings->usDspIrq];
- rHBridgeCfg1.AccessMode = 1;
- rHBridgeCfg2.Enable = true;
-
-
- rBusmasterCfg2.Reserved = 0;
- rBusmasterCfg1.Dma = (unsigned char) pDmaMap[pSettings->usDspDma];
- rBusmasterCfg1.NumTransfers =
- (unsigned char) pSettings->usNumTransfers;
- rBusmasterCfg1.ReRequest = (unsigned char) pSettings->usReRequest;
- rBusmasterCfg1.MEMCS16 = pSettings->bEnableMEMCS16;
- rBusmasterCfg2.IsaMemCmdWidth =
- (unsigned char) pSettings->usIsaMemCmdWidth;
-
-
- rIsaProtCfg.Reserved = 0;
- rIsaProtCfg.GateIOCHRDY = pSettings->bGateIOCHRDY;
-
- rPowerMgmtCfg.Reserved = 0;
- rPowerMgmtCfg.Enable = pSettings->bEnablePwrMgmt;
-
- rHBusTimerCfg.LoadValue =
- (unsigned char) pSettings->usHBusTimerLoadValue;
-
- rLBusTimeoutDisable.Reserved = 0;
- rLBusTimeoutDisable.DisableTimeout =
- pSettings->bDisableLBusTimeout;
-
- MKWORD(rChipReset) = ~pSettings->usChipletEnable;
-
- rClockControl1.Reserved1 = rClockControl1.Reserved2 = 0;
- rClockControl1.N_Divisor = pSettings->usN_Divisor;
- rClockControl1.M_Multiplier = pSettings->usM_Multiplier;
-
- rClockControl2.Reserved = 0;
- rClockControl2.PllBypass = pSettings->bPllBypass;
-
- /* Issue a soft reset to the chip */
- /* Note: Since we may be coming in with 3780i clocks suspended, we must keep
- * soft-reset active for 10ms.
- */
- rSlaveControl.ClockControl = 0;
- rSlaveControl.SoftReset = true;
- rSlaveControl.ConfigMode = false;
- rSlaveControl.Reserved = 0;
-
- spin_lock_irqsave(&dsp_lock, flags);
- OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
- MKWORD(tval) = InWordDsp(DSP_IsaSlaveControl);
-
- for (i = 0; i < 11; i++)
- udelay(2000);
-
- rSlaveControl.SoftReset = false;
- OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
-
- MKWORD(tval) = InWordDsp(DSP_IsaSlaveControl);
-
- /* Program our general configuration registers */
- WriteGenCfg(DSP_HBridgeCfg1Index, MKBYTE(rHBridgeCfg1));
- WriteGenCfg(DSP_HBridgeCfg2Index, MKBYTE(rHBridgeCfg2));
- WriteGenCfg(DSP_BusMasterCfg1Index, MKBYTE(rBusmasterCfg1));
- WriteGenCfg(DSP_BusMasterCfg2Index, MKBYTE(rBusmasterCfg2));
- WriteGenCfg(DSP_IsaProtCfgIndex, MKBYTE(rIsaProtCfg));
- WriteGenCfg(DSP_PowerMgCfgIndex, MKBYTE(rPowerMgmtCfg));
- WriteGenCfg(DSP_HBusTimerCfgIndex, MKBYTE(rHBusTimerCfg));
-
- if (pSettings->bModemEnabled) {
- WriteGenCfg(DSP_UartCfg1Index, MKBYTE(rUartCfg1));
- WriteGenCfg(DSP_UartCfg2Index, MKBYTE(rUartCfg2));
- }
-
-
- rHBridgeControl.EnableDspInt = false;
- rHBridgeControl.MemAutoInc = true;
- rHBridgeControl.IoAutoInc = false;
- rHBridgeControl.DiagnosticMode = false;
-
- OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
- spin_unlock_irqrestore(&dsp_lock, flags);
- WriteMsaCfg(DSP_LBusTimeoutDisable, MKWORD(rLBusTimeoutDisable));
- WriteMsaCfg(DSP_ClockControl_1, MKWORD(rClockControl1));
- WriteMsaCfg(DSP_ClockControl_2, MKWORD(rClockControl2));
- WriteMsaCfg(DSP_ChipReset, MKWORD(rChipReset));
-
- ReadMsaCfg(DSP_ChipID);
-
- return 0;
-}
-
-int dsp3780I_DisableDSP(struct dsp_3780i_config_settings *pSettings)
-{
- unsigned long flags;
- unsigned short usDspBaseIO = pSettings->usDspBaseIO;
- DSP_ISA_SLAVE_CONTROL rSlaveControl;
-
- rSlaveControl.ClockControl = 0;
- rSlaveControl.SoftReset = true;
- rSlaveControl.ConfigMode = false;
- rSlaveControl.Reserved = 0;
- spin_lock_irqsave(&dsp_lock, flags);
- OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
-
- udelay(5);
-
- rSlaveControl.ClockControl = 1;
- OutWordDsp(DSP_IsaSlaveControl, MKWORD(rSlaveControl));
- spin_unlock_irqrestore(&dsp_lock, flags);
-
- udelay(5);
-
- return 0;
-}
-
-int dsp3780I_Reset(struct dsp_3780i_config_settings *pSettings)
-{
- unsigned long flags;
- unsigned short usDspBaseIO = pSettings->usDspBaseIO;
- DSP_BOOT_DOMAIN rBootDomain;
- DSP_HBRIDGE_CONTROL rHBridgeControl;
-
- spin_lock_irqsave(&dsp_lock, flags);
- /* Mask DSP to PC interrupt */
- MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl);
-
- rHBridgeControl.EnableDspInt = false;
- OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
- spin_unlock_irqrestore(&dsp_lock, flags);
-
- /* Reset the core via the boot domain register */
- rBootDomain.ResetCore = true;
- rBootDomain.Halt = true;
- rBootDomain.NMI = true;
- rBootDomain.Reserved = 0;
-
- WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
-
- /* Reset all the chiplets and then reactivate them */
- WriteMsaCfg(DSP_ChipReset, 0xFFFF);
- udelay(5);
- WriteMsaCfg(DSP_ChipReset,
- (unsigned short) (~pSettings->usChipletEnable));
-
- return 0;
-}
-
-
-int dsp3780I_Run(struct dsp_3780i_config_settings *pSettings)
-{
- unsigned long flags;
- unsigned short usDspBaseIO = pSettings->usDspBaseIO;
- DSP_BOOT_DOMAIN rBootDomain;
- DSP_HBRIDGE_CONTROL rHBridgeControl;
-
- /* Transition the core to a running state */
- rBootDomain.ResetCore = true;
- rBootDomain.Halt = false;
- rBootDomain.NMI = true;
- rBootDomain.Reserved = 0;
- WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
-
- udelay(5);
-
- rBootDomain.ResetCore = false;
- WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
- udelay(5);
-
- rBootDomain.NMI = false;
- WriteMsaCfg(DSP_MspBootDomain, MKWORD(rBootDomain));
- udelay(5);
-
- /* Enable DSP to PC interrupt */
- spin_lock_irqsave(&dsp_lock, flags);
- MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl);
- rHBridgeControl.EnableDspInt = true;
-
- OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
- spin_unlock_irqrestore(&dsp_lock, flags);
-
- return 0;
-}
-
-
-int dsp3780I_ReadDStore(unsigned short usDspBaseIO, void __user *pvBuffer,
- unsigned uCount, unsigned long ulDSPAddr)
-{
- unsigned long flags;
- unsigned short __user *pusBuffer = pvBuffer;
- unsigned short val;
-
- /* Set the initial MSA address. No adjustments need to be made to data store addresses */
- spin_lock_irqsave(&dsp_lock, flags);
- OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
- OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
- spin_unlock_irqrestore(&dsp_lock, flags);
-
- /* Transfer the memory block */
- while (uCount-- != 0) {
- spin_lock_irqsave(&dsp_lock, flags);
- val = InWordDsp(DSP_MsaDataDSISHigh);
- spin_unlock_irqrestore(&dsp_lock, flags);
- if(put_user(val, pusBuffer++))
- return -EFAULT;
-
- PaceMsaAccess(usDspBaseIO);
- }
-
- return 0;
-}
-
-int dsp3780I_ReadAndClearDStore(unsigned short usDspBaseIO,
- void __user *pvBuffer, unsigned uCount,
- unsigned long ulDSPAddr)
-{
- unsigned long flags;
- unsigned short __user *pusBuffer = pvBuffer;
- unsigned short val;
-
- /* Set the initial MSA address. No adjustments need to be made to data store addresses */
- spin_lock_irqsave(&dsp_lock, flags);
- OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
- OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
- spin_unlock_irqrestore(&dsp_lock, flags);
-
- /* Transfer the memory block */
- while (uCount-- != 0) {
- spin_lock_irqsave(&dsp_lock, flags);
- val = InWordDsp(DSP_ReadAndClear);
- spin_unlock_irqrestore(&dsp_lock, flags);
- if(put_user(val, pusBuffer++))
- return -EFAULT;
-
- PaceMsaAccess(usDspBaseIO);
- }
-
- return 0;
-}
-
-
-int dsp3780I_WriteDStore(unsigned short usDspBaseIO, void __user *pvBuffer,
- unsigned uCount, unsigned long ulDSPAddr)
-{
- unsigned long flags;
- unsigned short __user *pusBuffer = pvBuffer;
-
- /* Set the initial MSA address. No adjustments need to be made to data store addresses */
- spin_lock_irqsave(&dsp_lock, flags);
- OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
- OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
- spin_unlock_irqrestore(&dsp_lock, flags);
-
- /* Transfer the memory block */
- while (uCount-- != 0) {
- unsigned short val;
- if(get_user(val, pusBuffer++))
- return -EFAULT;
- spin_lock_irqsave(&dsp_lock, flags);
- OutWordDsp(DSP_MsaDataDSISHigh, val);
- spin_unlock_irqrestore(&dsp_lock, flags);
-
- PaceMsaAccess(usDspBaseIO);
- }
-
- return 0;
-}
-
-
-int dsp3780I_ReadIStore(unsigned short usDspBaseIO, void __user *pvBuffer,
- unsigned uCount, unsigned long ulDSPAddr)
-{
- unsigned long flags;
- unsigned short __user *pusBuffer = pvBuffer;
-
- /*
- * Set the initial MSA address. To convert from an instruction store
- * address to an MSA address
- * shift the address two bits to the left and set bit 22
- */
- ulDSPAddr = (ulDSPAddr << 2) | (1 << 22);
- spin_lock_irqsave(&dsp_lock, flags);
- OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
- OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
- spin_unlock_irqrestore(&dsp_lock, flags);
-
- /* Transfer the memory block */
- while (uCount-- != 0) {
- unsigned short val_lo, val_hi;
- spin_lock_irqsave(&dsp_lock, flags);
- val_lo = InWordDsp(DSP_MsaDataISLow);
- val_hi = InWordDsp(DSP_MsaDataDSISHigh);
- spin_unlock_irqrestore(&dsp_lock, flags);
- if(put_user(val_lo, pusBuffer++))
- return -EFAULT;
- if(put_user(val_hi, pusBuffer++))
- return -EFAULT;
-
- PaceMsaAccess(usDspBaseIO);
-
- }
-
- return 0;
-}
-
-
-int dsp3780I_WriteIStore(unsigned short usDspBaseIO, void __user *pvBuffer,
- unsigned uCount, unsigned long ulDSPAddr)
-{
- unsigned long flags;
- unsigned short __user *pusBuffer = pvBuffer;
-
- /*
- * Set the initial MSA address. To convert from an instruction store
- * address to an MSA address
- * shift the address two bits to the left and set bit 22
- */
- ulDSPAddr = (ulDSPAddr << 2) | (1 << 22);
- spin_lock_irqsave(&dsp_lock, flags);
- OutWordDsp(DSP_MsaAddrLow, (unsigned short) ulDSPAddr);
- OutWordDsp(DSP_MsaAddrHigh, (unsigned short) (ulDSPAddr >> 16));
- spin_unlock_irqrestore(&dsp_lock, flags);
-
- /* Transfer the memory block */
- while (uCount-- != 0) {
- unsigned short val_lo, val_hi;
- if(get_user(val_lo, pusBuffer++))
- return -EFAULT;
- if(get_user(val_hi, pusBuffer++))
- return -EFAULT;
- spin_lock_irqsave(&dsp_lock, flags);
- OutWordDsp(DSP_MsaDataISLow, val_lo);
- OutWordDsp(DSP_MsaDataDSISHigh, val_hi);
- spin_unlock_irqrestore(&dsp_lock, flags);
-
- PaceMsaAccess(usDspBaseIO);
- }
-
- return 0;
-}
-
-
-int dsp3780I_GetIPCSource(unsigned short usDspBaseIO,
- unsigned short *pusIPCSource)
-{
- unsigned long flags;
- DSP_HBRIDGE_CONTROL rHBridgeControl;
-
- /*
- * Disable DSP to PC interrupts, read the interrupt register,
- * clear the pending IPC bits, and reenable DSP to PC interrupts
- */
- spin_lock_irqsave(&dsp_lock, flags);
- MKWORD(rHBridgeControl) = InWordDsp(DSP_HBridgeControl);
- rHBridgeControl.EnableDspInt = false;
- OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
-
- *pusIPCSource = InWordDsp(DSP_Interrupt);
- OutWordDsp(DSP_Interrupt, (unsigned short) ~(*pusIPCSource));
-
- rHBridgeControl.EnableDspInt = true;
- OutWordDsp(DSP_HBridgeControl, MKWORD(rHBridgeControl));
- spin_unlock_irqrestore(&dsp_lock, flags);
-
- return 0;
-}
+++ /dev/null
-/*
-*
-* 3780i.h -- declarations for 3780i.c
-*
-*
-* Written By: Mike Sullivan IBM Corporation
-*
-* Copyright (C) 1999 IBM Corporation
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation; either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* NO WARRANTY
-* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-* solely responsible for determining the appropriateness of using and
-* distributing the Program and assumes all risks associated with its
-* exercise of rights under this Agreement, including but not limited to
-* the risks and costs of program errors, damage to or loss of data,
-* programs or equipment, and unavailability or interruption of operations.
-*
-* DISCLAIMER OF LIABILITY
-* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*
-*
-* 10/23/2000 - Alpha Release
-* First release to the public
-*/
-
-#ifndef _LINUX_3780I_H
-#define _LINUX_3780I_H
-
-#include <asm/io.h>
-
-/* DSP I/O port offsets and definitions */
-#define DSP_IsaSlaveControl 0x0000 /* ISA slave control register */
-#define DSP_IsaSlaveStatus 0x0001 /* ISA slave status register */
-#define DSP_ConfigAddress 0x0002 /* General config address register */
-#define DSP_ConfigData 0x0003 /* General config data register */
-#define DSP_HBridgeControl 0x0002 /* HBridge control register */
-#define DSP_MsaAddrLow 0x0004 /* MSP System Address, low word */
-#define DSP_MsaAddrHigh 0x0006 /* MSP System Address, high word */
-#define DSP_MsaDataDSISHigh 0x0008 /* MSA data register: d-store word or high byte of i-store */
-#define DSP_MsaDataISLow 0x000A /* MSA data register: low word of i-store */
-#define DSP_ReadAndClear 0x000C /* MSA read and clear data register */
-#define DSP_Interrupt 0x000E /* Interrupt register (IPC source) */
-
-typedef struct {
- unsigned char ClockControl:1; /* RW: Clock control: 0=normal, 1=stop 3780i clocks */
- unsigned char SoftReset:1; /* RW: Soft reset 0=normal, 1=soft reset active */
- unsigned char ConfigMode:1; /* RW: Configuration mode, 0=normal, 1=config mode */
- unsigned short Reserved:13; /* 0: Reserved */
-} DSP_ISA_SLAVE_CONTROL;
-
-
-typedef struct {
- unsigned short EnableDspInt:1; /* RW: Enable DSP to X86 ISA interrupt 0=mask it, 1=enable it */
- unsigned short MemAutoInc:1; /* RW: Memory address auto increment, 0=disable, 1=enable */
- unsigned short IoAutoInc:1; /* RW: I/O address auto increment, 0=disable, 1=enable */
- unsigned short DiagnosticMode:1; /* RW: Disgnostic mode 0=nromal, 1=diagnostic mode */
- unsigned short IsaPacingTimer:12; /* R: ISA access pacing timer: count of core cycles stolen */
-} DSP_HBRIDGE_CONTROL;
-
-
-/* DSP register indexes used with the configuration register address (index) register */
-#define DSP_UartCfg1Index 0x0003 /* UART config register 1 */
-#define DSP_UartCfg2Index 0x0004 /* UART config register 2 */
-#define DSP_HBridgeCfg1Index 0x0007 /* HBridge config register 1 */
-#define DSP_HBridgeCfg2Index 0x0008 /* HBridge config register 2 */
-#define DSP_BusMasterCfg1Index 0x0009 /* ISA bus master config register 1 */
-#define DSP_BusMasterCfg2Index 0x000A /* ISA bus master config register 2 */
-#define DSP_IsaProtCfgIndex 0x000F /* ISA protocol control register */
-#define DSP_PowerMgCfgIndex 0x0010 /* Low poser suspend/resume enable */
-#define DSP_HBusTimerCfgIndex 0x0011 /* HBUS timer load value */
-
-typedef struct {
- unsigned char IrqActiveLow:1; /* RW: IRQ active high or low: 0=high, 1=low */
- unsigned char IrqPulse:1; /* RW: IRQ pulse or level: 0=level, 1=pulse */
- unsigned char Irq:3; /* RW: IRQ selection */
- unsigned char BaseIO:2; /* RW: Base I/O selection */
- unsigned char Reserved:1; /* 0: Reserved */
-} DSP_UART_CFG_1;
-
-typedef struct {
- unsigned char Enable:1; /* RW: Enable I/O and IRQ: 0=false, 1=true */
- unsigned char Reserved:7; /* 0: Reserved */
-} DSP_UART_CFG_2;
-
-typedef struct {
- unsigned char IrqActiveLow:1; /* RW: IRQ active high=0 or low=1 */
- unsigned char IrqPulse:1; /* RW: IRQ pulse=1 or level=0 */
- unsigned char Irq:3; /* RW: IRQ selection */
- unsigned char AccessMode:1; /* RW: 16-bit register access method 0=byte, 1=word */
- unsigned char Reserved:2; /* 0: Reserved */
-} DSP_HBRIDGE_CFG_1;
-
-typedef struct {
- unsigned char Enable:1; /* RW: enable I/O and IRQ: 0=false, 1=true */
- unsigned char Reserved:7; /* 0: Reserved */
-} DSP_HBRIDGE_CFG_2;
-
-
-typedef struct {
- unsigned char Dma:3; /* RW: DMA channel selection */
- unsigned char NumTransfers:2; /* RW: Maximum # of transfers once being granted the ISA bus */
- unsigned char ReRequest:2; /* RW: Minimum delay between releasing the ISA bus and requesting it again */
- unsigned char MEMCS16:1; /* RW: ISA signal MEMCS16: 0=disabled, 1=enabled */
-} DSP_BUSMASTER_CFG_1;
-
-typedef struct {
- unsigned char IsaMemCmdWidth:2; /* RW: ISA memory command width */
- unsigned char Reserved:6; /* 0: Reserved */
-} DSP_BUSMASTER_CFG_2;
-
-
-typedef struct {
- unsigned char GateIOCHRDY:1; /* RW: Enable IOCHRDY gating: 0=false, 1=true */
- unsigned char Reserved:7; /* 0: Reserved */
-} DSP_ISA_PROT_CFG;
-
-typedef struct {
- unsigned char Enable:1; /* RW: Enable low power suspend/resume 0=false, 1=true */
- unsigned char Reserved:7; /* 0: Reserved */
-} DSP_POWER_MGMT_CFG;
-
-typedef struct {
- unsigned char LoadValue:8; /* RW: HBUS timer load value */
-} DSP_HBUS_TIMER_CFG;
-
-
-
-/* DSP registers that exist in MSA I/O space */
-#define DSP_ChipID 0x80000000
-#define DSP_MspBootDomain 0x80000580
-#define DSP_LBusTimeoutDisable 0x80000580
-#define DSP_ClockControl_1 0x8000058A
-#define DSP_ClockControl_2 0x8000058C
-#define DSP_ChipReset 0x80000588
-#define DSP_GpioModeControl_15_8 0x80000082
-#define DSP_GpioDriverEnable_15_8 0x80000076
-#define DSP_GpioOutputData_15_8 0x80000072
-
-typedef struct {
- unsigned short NMI:1; /* RW: non maskable interrupt */
- unsigned short Halt:1; /* RW: Halt MSP clock */
- unsigned short ResetCore:1; /* RW: Reset MSP core interface */
- unsigned short Reserved:13; /* 0: Reserved */
-} DSP_BOOT_DOMAIN;
-
-typedef struct {
- unsigned short DisableTimeout:1; /* RW: Disable LBus timeout */
- unsigned short Reserved:15; /* 0: Reserved */
-} DSP_LBUS_TIMEOUT_DISABLE;
-
-typedef struct {
- unsigned short Memory:1; /* RW: Reset memory interface */
- unsigned short SerialPort1:1; /* RW: Reset serial port 1 interface */
- unsigned short SerialPort2:1; /* RW: Reset serial port 2 interface */
- unsigned short SerialPort3:1; /* RW: Reset serial port 3 interface */
- unsigned short Gpio:1; /* RW: Reset GPIO interface */
- unsigned short Dma:1; /* RW: Reset DMA interface */
- unsigned short SoundBlaster:1; /* RW: Reset soundblaster interface */
- unsigned short Uart:1; /* RW: Reset UART interface */
- unsigned short Midi:1; /* RW: Reset MIDI interface */
- unsigned short IsaMaster:1; /* RW: Reset ISA master interface */
- unsigned short Reserved:6; /* 0: Reserved */
-} DSP_CHIP_RESET;
-
-typedef struct {
- unsigned short N_Divisor:6; /* RW: (N) PLL output clock divisor */
- unsigned short Reserved1:2; /* 0: reserved */
- unsigned short M_Multiplier:6; /* RW: (M) PLL feedback clock multiplier */
- unsigned short Reserved2:2; /* 0: reserved */
-} DSP_CLOCK_CONTROL_1;
-
-typedef struct {
- unsigned short PllBypass:1; /* RW: PLL Bypass */
- unsigned short Reserved:15; /* 0: Reserved */
-} DSP_CLOCK_CONTROL_2;
-
-typedef struct {
- unsigned short Latch8:1;
- unsigned short Latch9:1;
- unsigned short Latch10:1;
- unsigned short Latch11:1;
- unsigned short Latch12:1;
- unsigned short Latch13:1;
- unsigned short Latch14:1;
- unsigned short Latch15:1;
- unsigned short Mask8:1;
- unsigned short Mask9:1;
- unsigned short Mask10:1;
- unsigned short Mask11:1;
- unsigned short Mask12:1;
- unsigned short Mask13:1;
- unsigned short Mask14:1;
- unsigned short Mask15:1;
-} DSP_GPIO_OUTPUT_DATA_15_8;
-
-typedef struct {
- unsigned short Enable8:1;
- unsigned short Enable9:1;
- unsigned short Enable10:1;
- unsigned short Enable11:1;
- unsigned short Enable12:1;
- unsigned short Enable13:1;
- unsigned short Enable14:1;
- unsigned short Enable15:1;
- unsigned short Mask8:1;
- unsigned short Mask9:1;
- unsigned short Mask10:1;
- unsigned short Mask11:1;
- unsigned short Mask12:1;
- unsigned short Mask13:1;
- unsigned short Mask14:1;
- unsigned short Mask15:1;
-} DSP_GPIO_DRIVER_ENABLE_15_8;
-
-typedef struct {
- unsigned short GpioMode8:2;
- unsigned short GpioMode9:2;
- unsigned short GpioMode10:2;
- unsigned short GpioMode11:2;
- unsigned short GpioMode12:2;
- unsigned short GpioMode13:2;
- unsigned short GpioMode14:2;
- unsigned short GpioMode15:2;
-} DSP_GPIO_MODE_15_8;
-
-/* Component masks that are defined in dspmgr.h */
-#define MW_ADC_MASK 0x0001
-#define MW_AIC2_MASK 0x0006
-#define MW_MIDI_MASK 0x0008
-#define MW_CDDAC_MASK 0x8001
-#define MW_AIC1_MASK 0xE006
-#define MW_UART_MASK 0xE00A
-#define MW_ACI_MASK 0xE00B
-
-/*
-* Definition of 3780i configuration structure. Unless otherwise stated,
-* these values are provided as input to the 3780i support layer. At present,
-* the only values maintained by the 3780i support layer are the saved UART
-* registers.
-*/
-struct dsp_3780i_config_settings {
-
- /* Location of base configuration register */
- unsigned short usBaseConfigIO;
-
- /* Enables for various DSP components */
- int bDSPEnabled;
- int bModemEnabled;
- int bInterruptClaimed;
-
- /* IRQ, DMA, and Base I/O addresses for various DSP components */
- unsigned short usDspIrq;
- unsigned short usDspDma;
- unsigned short usDspBaseIO;
- unsigned short usUartIrq;
- unsigned short usUartBaseIO;
-
- /* IRQ modes for various DSP components */
- int bDspIrqActiveLow;
- int bUartIrqActiveLow;
- int bDspIrqPulse;
- int bUartIrqPulse;
-
- /* Card abilities */
- unsigned uIps;
- unsigned uDStoreSize;
- unsigned uIStoreSize;
- unsigned uDmaBandwidth;
-
- /* Adapter specific 3780i settings */
- unsigned short usNumTransfers;
- unsigned short usReRequest;
- int bEnableMEMCS16;
- unsigned short usIsaMemCmdWidth;
- int bGateIOCHRDY;
- int bEnablePwrMgmt;
- unsigned short usHBusTimerLoadValue;
- int bDisableLBusTimeout;
- unsigned short usN_Divisor;
- unsigned short usM_Multiplier;
- int bPllBypass;
- unsigned short usChipletEnable; /* Used with the chip reset register to enable specific chiplets */
-
- /* Saved UART registers. These are maintained by the 3780i support layer. */
- int bUartSaved; /* True after a successful save of the UART registers */
- unsigned char ucIER; /* Interrupt enable register */
- unsigned char ucFCR; /* FIFO control register */
- unsigned char ucLCR; /* Line control register */
- unsigned char ucMCR; /* Modem control register */
- unsigned char ucSCR; /* Scratch register */
- unsigned char ucDLL; /* Divisor latch, low byte */
- unsigned char ucDLM; /* Divisor latch, high byte */
-};
-
-
-/* 3780i support functions */
-int dsp3780I_EnableDSP(struct dsp_3780i_config_settings *pSettings,
- unsigned short *pIrqMap,
- unsigned short *pDmaMap);
-int dsp3780I_DisableDSP(struct dsp_3780i_config_settings *pSettings);
-int dsp3780I_Reset(struct dsp_3780i_config_settings *pSettings);
-int dsp3780I_Run(struct dsp_3780i_config_settings *pSettings);
-int dsp3780I_ReadDStore(unsigned short usDspBaseIO, void __user *pvBuffer,
- unsigned uCount, unsigned long ulDSPAddr);
-int dsp3780I_ReadAndClearDStore(unsigned short usDspBaseIO,
- void __user *pvBuffer, unsigned uCount,
- unsigned long ulDSPAddr);
-int dsp3780I_WriteDStore(unsigned short usDspBaseIO, void __user *pvBuffer,
- unsigned uCount, unsigned long ulDSPAddr);
-int dsp3780I_ReadIStore(unsigned short usDspBaseIO, void __user *pvBuffer,
- unsigned uCount, unsigned long ulDSPAddr);
-int dsp3780I_WriteIStore(unsigned short usDspBaseIO, void __user *pvBuffer,
- unsigned uCount, unsigned long ulDSPAddr);
-unsigned short dsp3780I_ReadMsaCfg(unsigned short usDspBaseIO,
- unsigned long ulMsaAddr);
-void dsp3780I_WriteMsaCfg(unsigned short usDspBaseIO,
- unsigned long ulMsaAddr, unsigned short usValue);
-int dsp3780I_GetIPCSource(unsigned short usDspBaseIO,
- unsigned short *pusIPCSource);
-
-/* I/O port access macros */
-#define MKWORD(var) (*((unsigned short *)(&var)))
-#define MKBYTE(var) (*((unsigned char *)(&var)))
-
-#define WriteMsaCfg(addr,value) dsp3780I_WriteMsaCfg(usDspBaseIO,addr,value)
-#define ReadMsaCfg(addr) dsp3780I_ReadMsaCfg(usDspBaseIO,addr)
-#define WriteGenCfg(index,value) dsp3780I_WriteGenCfg(usDspBaseIO,index,value)
-#define ReadGenCfg(index) dsp3780I_ReadGenCfg(usDspBaseIO,index)
-
-#define InWordDsp(index) inw(usDspBaseIO+index)
-#define InByteDsp(index) inb(usDspBaseIO+index)
-#define OutWordDsp(index,value) outw(value,usDspBaseIO+index)
-#define OutByteDsp(index,value) outb(value,usDspBaseIO+index)
-
-#endif
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Makefile for ACP Modem (Mwave).
-#
-# See the README file in this directory for more info. <paulsch@us.ibm.com>
-#
-
-obj-$(CONFIG_MWAVE) += mwave.o
-
-mwave-y := mwavedd.o smapi.o tp3780i.o 3780i.o
+++ /dev/null
-Module options
---------------
-
-The mwave module takes the following options. Note that these options
-are not saved by the BIOS and so do not persist after unload and reload.
-
- mwave_3780i_irq=5/7/10/11/15
- If the dsp irq has not been setup and stored in bios by the
- thinkpad configuration utility then this parameter allows the
- irq used by the dsp to be configured.
-
- mwave_3780i_io=0x130/0x350/0x0070/0xDB0
- If the dsp io range has not been setup and stored in bios by the
- thinkpad configuration utility then this parameter allows the
- io range used by the dsp to be configured.
-
- mwave_uart_irq=3/4
- If the mwave's uart irq has not been setup and stored in bios by the
- thinkpad configuration utility then this parameter allows the
- irq used by the mwave uart to be configured.
-
- mwave_uart_io=0x3f8/0x2f8/0x3E8/0x2E8
- If the uart io range has not been setup and stored in bios by the
- thinkpad configuration utility then this parameter allows the
- io range used by the mwave uart to be configured.
-
-Example to enable the 3780i DSP using ttyS1 resources:
-
- insmod mwave mwave_3780i_irq=10 mwave_3780i_io=0x0130 mwave_uart_irq=3 mwave_uart_io=0x2f8
-
-Accessing the driver
---------------------
-
-You must also create a node for the driver:
- mkdir -p /dev/modems
- mknod --mode=660 /dev/modems/mwave c 10 219
-
+++ /dev/null
-/*
-*
-* mwavedd.c -- mwave device driver
-*
-*
-* Written By: Mike Sullivan IBM Corporation
-*
-* Copyright (C) 1999 IBM Corporation
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation; either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* NO WARRANTY
-* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-* solely responsible for determining the appropriateness of using and
-* distributing the Program and assumes all risks associated with its
-* exercise of rights under this Agreement, including but not limited to
-* the risks and costs of program errors, damage to or loss of data,
-* programs or equipment, and unavailability or interruption of operations.
-*
-* DISCLAIMER OF LIABILITY
-* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*
-*
-* 10/23/2000 - Alpha Release
-* First release to the public
-*/
-
-#define pr_fmt(fmt) "mwavedd: " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/major.h>
-#include <linux/miscdevice.h>
-#include <linux/device.h>
-#include <linux/serial.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_8250.h>
-#include <linux/nospec.h>
-#include "smapi.h"
-#include "mwavedd.h"
-#include "3780i.h"
-#include "tp3780i.h"
-
-MODULE_DESCRIPTION("3780i Advanced Communications Processor (Mwave) driver");
-MODULE_AUTHOR("Mike Sullivan and Paul Schroeder");
-MODULE_LICENSE("GPL");
-
-/*
-* These parameters support the setting of MWave resources. Note that no
-* checks are made against other devices (ie. superio) for conflicts.
-* We'll depend on users using the tpctl utility to do that for now
-*/
-static DEFINE_MUTEX(mwave_mutex);
-int mwave_3780i_irq = 0;
-int mwave_3780i_io = 0;
-int mwave_uart_irq = 0;
-int mwave_uart_io = 0;
-module_param_hw(mwave_3780i_irq, int, irq, 0);
-module_param_hw(mwave_3780i_io, int, ioport, 0);
-module_param_hw(mwave_uart_irq, int, irq, 0);
-module_param_hw(mwave_uart_io, int, ioport, 0);
-
-struct mwave_device_data mwave_s_mdd;
-
-static long mwave_ioctl(struct file *file, unsigned int iocmd,
- unsigned long ioarg)
-{
- unsigned int retval = 0;
- struct mwave_device_data *pDrvData = &mwave_s_mdd;
- void __user *arg = (void __user *)ioarg;
-
- switch (iocmd) {
-
- case IOCTL_MW_RESET:
- mutex_lock(&mwave_mutex);
- retval = tp3780I_ResetDSP(&pDrvData->rBDData);
- mutex_unlock(&mwave_mutex);
- break;
-
- case IOCTL_MW_RUN:
- mutex_lock(&mwave_mutex);
- retval = tp3780I_StartDSP(&pDrvData->rBDData);
- mutex_unlock(&mwave_mutex);
- break;
-
- case IOCTL_MW_DSP_ABILITIES: {
- struct mw_abilities rAbilities;
-
- mutex_lock(&mwave_mutex);
- retval = tp3780I_QueryAbilities(&pDrvData->rBDData,
- &rAbilities);
- mutex_unlock(&mwave_mutex);
- if (retval == 0) {
- if (copy_to_user(arg, &rAbilities, sizeof(rAbilities)))
- return -EFAULT;
- }
- }
- break;
-
- case IOCTL_MW_READ_DATA:
- case IOCTL_MW_READCLEAR_DATA: {
- struct mw_readwrite rReadData;
- unsigned short __user *pusBuffer = NULL;
-
- if( copy_from_user(&rReadData, arg,
- sizeof(struct mw_readwrite)) )
- return -EFAULT;
- pusBuffer = (unsigned short __user *) (rReadData.pBuf);
-
- mutex_lock(&mwave_mutex);
- retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
- iocmd,
- pusBuffer,
- rReadData.ulDataLength,
- rReadData.usDspAddress);
- mutex_unlock(&mwave_mutex);
- }
- break;
-
- case IOCTL_MW_READ_INST: {
- struct mw_readwrite rReadData;
- unsigned short __user *pusBuffer = NULL;
-
- if (copy_from_user(&rReadData, arg, sizeof(rReadData)))
- return -EFAULT;
- pusBuffer = (unsigned short __user *) (rReadData.pBuf);
-
- mutex_lock(&mwave_mutex);
- retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
- iocmd, pusBuffer,
- rReadData.ulDataLength / 2,
- rReadData.usDspAddress);
- mutex_unlock(&mwave_mutex);
- }
- break;
-
- case IOCTL_MW_WRITE_DATA: {
- struct mw_readwrite rWriteData;
- unsigned short __user *pusBuffer = NULL;
-
- if (copy_from_user(&rWriteData, arg, sizeof(rWriteData)))
- return -EFAULT;
- pusBuffer = (unsigned short __user *) (rWriteData.pBuf);
-
- mutex_lock(&mwave_mutex);
- retval = tp3780I_ReadWriteDspDStore(&pDrvData->rBDData,
- iocmd, pusBuffer,
- rWriteData.ulDataLength,
- rWriteData.usDspAddress);
- mutex_unlock(&mwave_mutex);
- }
- break;
-
- case IOCTL_MW_WRITE_INST: {
- struct mw_readwrite rWriteData;
- unsigned short __user *pusBuffer = NULL;
-
- if (copy_from_user(&rWriteData, arg, sizeof(rWriteData)))
- return -EFAULT;
- pusBuffer = (unsigned short __user *)(rWriteData.pBuf);
-
- mutex_lock(&mwave_mutex);
- retval = tp3780I_ReadWriteDspIStore(&pDrvData->rBDData,
- iocmd, pusBuffer,
- rWriteData.ulDataLength,
- rWriteData.usDspAddress);
- mutex_unlock(&mwave_mutex);
- }
- break;
-
- case IOCTL_MW_REGISTER_IPC: {
- unsigned int ipcnum = (unsigned int) ioarg;
-
- if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
- pr_err("%s: IOCTL_MW_REGISTER_IPC: Error: Invalid ipcnum %x\n",
- __func__, ipcnum);
- return -EINVAL;
- }
- ipcnum = array_index_nospec(ipcnum,
- ARRAY_SIZE(pDrvData->IPCs));
-
- mutex_lock(&mwave_mutex);
- pDrvData->IPCs[ipcnum].bIsHere = false;
- pDrvData->IPCs[ipcnum].bIsEnabled = true;
- mutex_unlock(&mwave_mutex);
- }
- break;
-
- case IOCTL_MW_GET_IPC: {
- unsigned int ipcnum = (unsigned int) ioarg;
-
- if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
- pr_err("%s: IOCTL_MW_GET_IPC: Error: Invalid ipcnum %x\n", __func__,
- ipcnum);
- return -EINVAL;
- }
- ipcnum = array_index_nospec(ipcnum,
- ARRAY_SIZE(pDrvData->IPCs));
-
- mutex_lock(&mwave_mutex);
- if (pDrvData->IPCs[ipcnum].bIsEnabled == true) {
- DECLARE_WAITQUEUE(wait, current);
-
- add_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait);
- pDrvData->IPCs[ipcnum].bIsHere = true;
- set_current_state(TASK_INTERRUPTIBLE);
- /* check whether an event was signalled by */
- /* the interrupt handler while we were gone */
- if (pDrvData->IPCs[ipcnum].usIntCount == 1) { /* first int has occurred (race condition) */
- pDrvData->IPCs[ipcnum].usIntCount = 2; /* first int has been handled */
- } else { /* either 1st int has not yet occurred, or we have already handled the first int */
- schedule();
- if (pDrvData->IPCs[ipcnum].usIntCount == 1) {
- pDrvData->IPCs[ipcnum].usIntCount = 2;
- }
- }
- pDrvData->IPCs[ipcnum].bIsHere = false;
- remove_wait_queue(&pDrvData->IPCs[ipcnum].ipc_wait_queue, &wait);
- set_current_state(TASK_RUNNING);
- }
- mutex_unlock(&mwave_mutex);
- }
- break;
-
- case IOCTL_MW_UNREGISTER_IPC: {
- unsigned int ipcnum = (unsigned int) ioarg;
-
- if (ipcnum >= ARRAY_SIZE(pDrvData->IPCs)) {
- pr_err("%s: IOCTL_MW_UNREGISTER_IPC: Error: Invalid ipcnum %x\n",
- __func__, ipcnum);
- return -EINVAL;
- }
- ipcnum = array_index_nospec(ipcnum,
- ARRAY_SIZE(pDrvData->IPCs));
- mutex_lock(&mwave_mutex);
- if (pDrvData->IPCs[ipcnum].bIsEnabled == true) {
- pDrvData->IPCs[ipcnum].bIsEnabled = false;
- if (pDrvData->IPCs[ipcnum].bIsHere == true) {
- wake_up_interruptible(&pDrvData->IPCs[ipcnum].ipc_wait_queue);
- }
- }
- mutex_unlock(&mwave_mutex);
- }
- break;
-
- default:
- return -ENOTTY;
- } /* switch */
-
- return retval;
-}
-
-static int register_serial_portandirq(unsigned int port, int irq)
-{
- struct uart_8250_port uart;
-
- switch ( port ) {
- case 0x3f8:
- case 0x2f8:
- case 0x3e8:
- case 0x2e8:
- /* OK */
- break;
- default:
- pr_err("%s: Error: Illegal port %x\n", __func__, port);
- return -1;
- } /* switch */
- /* port is okay */
-
- switch ( irq ) {
- case 3:
- case 4:
- case 5:
- case 7:
- /* OK */
- break;
- default:
- pr_err("%s: Error: Illegal irq %x\n", __func__, irq);
- return -1;
- } /* switch */
- /* irq is okay */
-
- memset(&uart, 0, sizeof(uart));
-
- uart.port.uartclk = 1843200;
- uart.port.iobase = port;
- uart.port.irq = irq;
- uart.port.iotype = UPIO_PORT;
- uart.port.flags = UPF_SHARE_IRQ;
- return serial8250_register_8250_port(&uart);
-}
-
-static const struct file_operations mwave_fops = {
- .owner = THIS_MODULE,
- .unlocked_ioctl = mwave_ioctl,
- .llseek = default_llseek,
-};
-
-static struct miscdevice mwave_misc_dev = { MWAVE_MINOR, "mwave", &mwave_fops };
-
-/*
-* mwave_init is called on module load
-*
-* mwave_exit is called on module unload
-* mwave_exit is also used to clean up after an aborted mwave_init
-*/
-static void mwave_exit(void)
-{
- struct mwave_device_data *pDrvData = &mwave_s_mdd;
-
- if ( pDrvData->sLine >= 0 ) {
- serial8250_unregister_port(pDrvData->sLine);
- }
- if (pDrvData->bMwaveDevRegistered) {
- misc_deregister(&mwave_misc_dev);
- }
- if (pDrvData->bDSPEnabled) {
- tp3780I_DisableDSP(&pDrvData->rBDData);
- }
- if (pDrvData->bResourcesClaimed) {
- tp3780I_ReleaseResources(&pDrvData->rBDData);
- }
- if (pDrvData->bBDInitialized) {
- tp3780I_Cleanup(&pDrvData->rBDData);
- }
-}
-
-module_exit(mwave_exit);
-
-static int __init mwave_init(void)
-{
- int i;
- int retval = 0;
- struct mwave_device_data *pDrvData = &mwave_s_mdd;
-
- memset(&mwave_s_mdd, 0, sizeof(mwave_s_mdd));
-
- pDrvData->bBDInitialized = false;
- pDrvData->bResourcesClaimed = false;
- pDrvData->bDSPEnabled = false;
- pDrvData->bDSPReset = false;
- pDrvData->bMwaveDevRegistered = false;
- pDrvData->sLine = -1;
-
- for (i = 0; i < ARRAY_SIZE(pDrvData->IPCs); i++) {
- pDrvData->IPCs[i].bIsEnabled = false;
- pDrvData->IPCs[i].bIsHere = false;
- pDrvData->IPCs[i].usIntCount = 0; /* no ints received yet */
- init_waitqueue_head(&pDrvData->IPCs[i].ipc_wait_queue);
- }
-
- retval = tp3780I_InitializeBoardData(&pDrvData->rBDData);
- if (retval) {
- pr_err("%s: Error: Failed to initialize board data\n", __func__);
- goto cleanup_error;
- }
- pDrvData->bBDInitialized = true;
-
- retval = tp3780I_CalcResources(&pDrvData->rBDData);
- if (retval) {
- pr_err("%s: Error: Failed to calculate resources\n", __func__);
- goto cleanup_error;
- }
-
- retval = tp3780I_ClaimResources(&pDrvData->rBDData);
- if (retval) {
- pr_err("%s: Error: Failed to claim resources\n", __func__);
- goto cleanup_error;
- }
- pDrvData->bResourcesClaimed = true;
-
- retval = tp3780I_EnableDSP(&pDrvData->rBDData);
- if (retval) {
- pr_err("%s: Error: Failed to enable DSP\n", __func__);
- goto cleanup_error;
- }
- pDrvData->bDSPEnabled = true;
-
- if (misc_register(&mwave_misc_dev) < 0) {
- pr_err("%s: Error: Failed to register misc device\n", __func__);
- goto cleanup_error;
- }
- pDrvData->bMwaveDevRegistered = true;
-
- pDrvData->sLine = register_serial_portandirq(
- pDrvData->rBDData.rDspSettings.usUartBaseIO,
- pDrvData->rBDData.rDspSettings.usUartIrq
- );
- if (pDrvData->sLine < 0) {
- pr_err("%s: Error: Failed to register serial driver\n", __func__);
- goto cleanup_error;
- }
- /* uart is registered */
-
- /* SUCCESS! */
- return 0;
-
-cleanup_error:
- pr_err("%s: Error: Failed to initialize\n", __func__);
- mwave_exit(); /* clean up */
-
- return -EIO;
-}
-
-module_init(mwave_init);
-
+++ /dev/null
-/*
-*
-* mwavedd.h -- declarations for mwave device driver
-*
-*
-* Written By: Mike Sullivan IBM Corporation
-*
-* Copyright (C) 1999 IBM Corporation
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation; either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* NO WARRANTY
-* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-* solely responsible for determining the appropriateness of using and
-* distributing the Program and assumes all risks associated with its
-* exercise of rights under this Agreement, including but not limited to
-* the risks and costs of program errors, damage to or loss of data,
-* programs or equipment, and unavailability or interruption of operations.
-*
-* DISCLAIMER OF LIABILITY
-* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*
-*
-* 10/23/2000 - Alpha Release
-* First release to the public
-*/
-
-#ifndef _LINUX_MWAVEDD_H
-#define _LINUX_MWAVEDD_H
-#include "3780i.h"
-#include "tp3780i.h"
-#include "smapi.h"
-#include "mwavepub.h"
-#include <linux/ioctl.h>
-#include <linux/uaccess.h>
-#include <linux/wait.h>
-
-extern int mwave_3780i_irq;
-extern int mwave_3780i_io;
-extern int mwave_uart_irq;
-extern int mwave_uart_io;
-
-struct mwave_ipc {
- unsigned short usIntCount; /* 0=none, 1=first, 2=greater than 1st */
- bool bIsEnabled;
- bool bIsHere;
- /* entry spin lock */
- wait_queue_head_t ipc_wait_queue;
-};
-
-struct mwave_device_data {
- struct thinkpad_bd_data rBDData; /* board driver's data area */
- unsigned long ulIPCSource_ISR; /* IPC source bits for recently processed intr, set during ISR processing */
- unsigned long ulIPCSource_DPC; /* IPC source bits for recently processed intr, set during DPC processing */
- bool bBDInitialized;
- bool bResourcesClaimed;
- bool bDSPEnabled;
- bool bDSPReset;
- struct mwave_ipc IPCs[16];
- bool bMwaveDevRegistered;
- short sLine;
- int nr_registered_attrs;
- int device_registered;
-
-};
-
-extern struct mwave_device_data mwave_s_mdd;
-
-#endif
+++ /dev/null
-/*
-*
-* mwavepub.h -- PUBLIC declarations for the mwave driver
-* and applications using it
-*
-*
-* Written By: Mike Sullivan IBM Corporation
-*
-* Copyright (C) 1999 IBM Corporation
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation; either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* NO WARRANTY
-* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-* solely responsible for determining the appropriateness of using and
-* distributing the Program and assumes all risks associated with its
-* exercise of rights under this Agreement, including but not limited to
-* the risks and costs of program errors, damage to or loss of data,
-* programs or equipment, and unavailability or interruption of operations.
-*
-* DISCLAIMER OF LIABILITY
-* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*
-*
-* 10/23/2000 - Alpha Release
-* First release to the public
-*/
-
-#ifndef _LINUX_MWAVEPUB_H
-#define _LINUX_MWAVEPUB_H
-
-#include <linux/miscdevice.h>
-
-
-struct mw_abilities {
- unsigned long instr_per_sec;
- unsigned long data_size;
- unsigned long inst_size;
- unsigned long bus_dma_bw;
- unsigned short uart_enable;
- short component_count;
- unsigned long component_list[7];
- char mwave_os_name[16];
- char bios_task_name[16];
-};
-
-
-struct mw_readwrite {
- unsigned short usDspAddress; /* The dsp address */
- unsigned long ulDataLength; /* The size in bytes of the data or user buffer */
- void __user *pBuf; /* Input:variable sized buffer */
-};
-
-#define IOCTL_MW_RESET _IO(MWAVE_MINOR,1)
-#define IOCTL_MW_RUN _IO(MWAVE_MINOR,2)
-#define IOCTL_MW_DSP_ABILITIES _IOR(MWAVE_MINOR,3,struct mw_abilities)
-#define IOCTL_MW_READ_DATA _IOR(MWAVE_MINOR,4,struct mw_readwrite)
-#define IOCTL_MW_READCLEAR_DATA _IOR(MWAVE_MINOR,5,struct mw_readwrite)
-#define IOCTL_MW_READ_INST _IOR(MWAVE_MINOR,6,struct mw_readwrite)
-#define IOCTL_MW_WRITE_DATA _IOW(MWAVE_MINOR,7,struct mw_readwrite)
-#define IOCTL_MW_WRITE_INST _IOW(MWAVE_MINOR,8,struct mw_readwrite)
-#define IOCTL_MW_REGISTER_IPC _IOW(MWAVE_MINOR,9,int)
-#define IOCTL_MW_UNREGISTER_IPC _IOW(MWAVE_MINOR,10,int)
-#define IOCTL_MW_GET_IPC _IOW(MWAVE_MINOR,11,int)
-#define IOCTL_MW_TRACE _IOR(MWAVE_MINOR,12,struct mw_readwrite)
-
-
-#endif
+++ /dev/null
-/*
-*
-* smapi.c -- SMAPI interface routines
-*
-*
-* Written By: Mike Sullivan IBM Corporation
-*
-* Copyright (C) 1999 IBM Corporation
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation; either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* NO WARRANTY
-* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-* solely responsible for determining the appropriateness of using and
-* distributing the Program and assumes all risks associated with its
-* exercise of rights under this Agreement, including but not limited to
-* the risks and costs of program errors, damage to or loss of data,
-* programs or equipment, and unavailability or interruption of operations.
-*
-* DISCLAIMER OF LIABILITY
-* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*
-*
-* 10/23/2000 - Alpha Release
-* First release to the public
-*/
-
-#define pr_fmt(fmt) "smapi: " fmt
-
-#include <linux/kernel.h>
-#include <linux/mc146818rtc.h> /* CMOS defines */
-#include "smapi.h"
-#include "mwavedd.h"
-
-static unsigned short g_usSmapiPort = 0;
-
-
-static int smapi_request(unsigned short inBX, unsigned short inCX,
- unsigned short inDI, unsigned short inSI,
- unsigned short *outAX, unsigned short *outBX,
- unsigned short *outCX, unsigned short *outDX,
- unsigned short *outDI, unsigned short *outSI)
-{
- unsigned short myoutAX = 2, *pmyoutAX = &myoutAX;
- unsigned short myoutBX = 3, *pmyoutBX = &myoutBX;
- unsigned short myoutCX = 4, *pmyoutCX = &myoutCX;
- unsigned short myoutDX = 5, *pmyoutDX = &myoutDX;
- unsigned short myoutDI = 6, *pmyoutDI = &myoutDI;
- unsigned short myoutSI = 7, *pmyoutSI = &myoutSI;
- unsigned short usSmapiOK = -EIO, *pusSmapiOK = &usSmapiOK;
- unsigned int inBXCX = (inBX << 16) | inCX;
- unsigned int inDISI = (inDI << 16) | inSI;
-
- __asm__ __volatile__("movw $0x5380,%%ax\n\t"
- "movl %7,%%ebx\n\t"
- "shrl $16, %%ebx\n\t"
- "movw %7,%%cx\n\t"
- "movl %8,%%edi\n\t"
- "shrl $16,%%edi\n\t"
- "movw %8,%%si\n\t"
- "movw %9,%%dx\n\t"
- "out %%al,%%dx\n\t"
- "out %%al,$0x4F\n\t"
- "cmpb $0x53,%%ah\n\t"
- "je 2f\n\t"
- "1:\n\t"
- "orb %%ah,%%ah\n\t"
- "jnz 2f\n\t"
- "movw %%ax,%0\n\t"
- "movw %%bx,%1\n\t"
- "movw %%cx,%2\n\t"
- "movw %%dx,%3\n\t"
- "movw %%di,%4\n\t"
- "movw %%si,%5\n\t"
- "movw $1,%6\n\t"
- "2:\n\t":"=m"(*(unsigned short *) pmyoutAX),
- "=m"(*(unsigned short *) pmyoutBX),
- "=m"(*(unsigned short *) pmyoutCX),
- "=m"(*(unsigned short *) pmyoutDX),
- "=m"(*(unsigned short *) pmyoutDI),
- "=m"(*(unsigned short *) pmyoutSI),
- "=m"(*(unsigned short *) pusSmapiOK)
- :"m"(inBXCX), "m"(inDISI), "m"(g_usSmapiPort)
- :"%eax", "%ebx", "%ecx", "%edx", "%edi",
- "%esi");
-
- *outAX = myoutAX;
- *outBX = myoutBX;
- *outCX = myoutCX;
- *outDX = myoutDX;
- *outDI = myoutDI;
- *outSI = myoutSI;
-
- return usSmapiOK == 1 ? 0 : -EIO;
-}
-
-
-int smapi_query_DSP_cfg(struct smapi_dsp_settings *pSettings)
-{
- int bRC;
- unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
- static const unsigned short ausDspBases[] = {
- 0x0030, 0x4E30, 0x8E30, 0xCE30,
- 0x0130, 0x0350, 0x0070, 0x0DB0 };
- static const unsigned short ausUartBases[] = {
- 0x03F8, 0x02F8, 0x03E8, 0x02E8 };
-
- bRC = smapi_request(0x1802, 0x0000, 0, 0,
- &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
- if (bRC) {
- pr_err("%s: Error: Could not get DSP Settings. Aborting.\n", __func__);
- return bRC;
- }
-
- pSettings->bDSPPresent = ((usBX & 0x0100) != 0);
- pSettings->bDSPEnabled = ((usCX & 0x0001) != 0);
- pSettings->usDspIRQ = usSI & 0x00FF;
- pSettings->usDspDMA = (usSI & 0xFF00) >> 8;
- if ((usDI & 0x00FF) < ARRAY_SIZE(ausDspBases)) {
- pSettings->usDspBaseIO = ausDspBases[usDI & 0x00FF];
- } else {
- pSettings->usDspBaseIO = 0;
- }
-
- /* check for illegal values */
- if ( pSettings->usDspBaseIO == 0 )
- pr_err("%s: Worry: DSP base I/O address is 0\n", __func__);
- if ( pSettings->usDspIRQ == 0 )
- pr_err("%s: Worry: DSP IRQ line is 0\n", __func__);
-
- bRC = smapi_request(0x1804, 0x0000, 0, 0,
- &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
- if (bRC) {
- pr_err("%s: Error: Could not get DSP modem settings. Aborting.\n", __func__);
- return bRC;
- }
-
- pSettings->bModemEnabled = ((usCX & 0x0001) != 0);
- pSettings->usUartIRQ = usSI & 0x000F;
- if (((usSI & 0xFF00) >> 8) < ARRAY_SIZE(ausUartBases)) {
- pSettings->usUartBaseIO = ausUartBases[(usSI & 0xFF00) >> 8];
- } else {
- pSettings->usUartBaseIO = 0;
- }
-
- /* check for illegal values */
- if ( pSettings->usUartBaseIO == 0 )
- pr_err("%s: Worry: UART base I/O address is 0\n", __func__);
- if ( pSettings->usUartIRQ == 0 )
- pr_err("%s: Worry: UART IRQ line is 0\n", __func__);
-
- return bRC;
-}
-
-
-int smapi_set_DSP_cfg(void)
-{
- int bRC = -EIO;
- int i;
- unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
- static const unsigned short ausDspBases[] = {
- 0x0030, 0x4E30, 0x8E30, 0xCE30,
- 0x0130, 0x0350, 0x0070, 0x0DB0 };
- static const unsigned short ausUartBases[] = {
- 0x03F8, 0x02F8, 0x03E8, 0x02E8 };
- static const unsigned short ausDspIrqs[] = {
- 5, 7, 10, 11, 15 };
- static const unsigned short ausUartIrqs[] = {
- 3, 4 };
-
- unsigned short dspio_index = 0, uartio_index = 0;
-
- if (mwave_3780i_io) {
- for (i = 0; i < ARRAY_SIZE(ausDspBases); i++) {
- if (mwave_3780i_io == ausDspBases[i])
- break;
- }
- if (i == ARRAY_SIZE(ausDspBases)) {
- pr_err("%s: Error: Invalid mwave_3780i_io address %x. Aborting.\n",
- __func__, mwave_3780i_io);
- return bRC;
- }
- dspio_index = i;
- }
-
- if (mwave_3780i_irq) {
- for (i = 0; i < ARRAY_SIZE(ausDspIrqs); i++) {
- if (mwave_3780i_irq == ausDspIrqs[i])
- break;
- }
- if (i == ARRAY_SIZE(ausDspIrqs)) {
- pr_err("%s: Error: Invalid mwave_3780i_irq %x. Aborting.\n", __func__,
- mwave_3780i_irq);
- return bRC;
- }
- }
-
- if (mwave_uart_io) {
- for (i = 0; i < ARRAY_SIZE(ausUartBases); i++) {
- if (mwave_uart_io == ausUartBases[i])
- break;
- }
- if (i == ARRAY_SIZE(ausUartBases)) {
- pr_err("%s: Error: Invalid mwave_uart_io address %x. Aborting.\n", __func__,
- mwave_uart_io);
- return bRC;
- }
- uartio_index = i;
- }
-
-
- if (mwave_uart_irq) {
- for (i = 0; i < ARRAY_SIZE(ausUartIrqs); i++) {
- if (mwave_uart_irq == ausUartIrqs[i])
- break;
- }
- if (i == ARRAY_SIZE(ausUartIrqs)) {
- pr_err("%s: Error: Invalid mwave_uart_irq %x. Aborting.\n", __func__,
- mwave_uart_irq);
- return bRC;
- }
- }
-
- if (mwave_uart_irq || mwave_uart_io) {
-
- /* Check serial port A */
- bRC = smapi_request(0x1402, 0x0000, 0, 0,
- &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
- if (bRC) goto exit_smapi_request_error;
- /* bRC == 0 */
- if (usBX & 0x0100) { /* serial port A is present */
- if (usCX & 1) { /* serial port is enabled */
- if ((usSI & 0xFF) == mwave_uart_irq) {
- pr_err("%s: Serial port A irq %x conflicts with mwave_uart_irq %x\n",
- __func__, usSI & 0xFF, mwave_uart_irq);
- goto exit_conflict;
- } else {
- if ((usSI >> 8) == uartio_index) {
- pr_err("%s: Serial port A base I/O address %x conflicts with mwave uart I/O %x\n",
- __func__, ausUartBases[usSI >> 8],
- ausUartBases[uartio_index]);
- goto exit_conflict;
- }
- }
- }
- }
-
- /* Check serial port B */
- bRC = smapi_request(0x1404, 0x0000, 0, 0,
- &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
- if (bRC) goto exit_smapi_request_error;
- /* bRC == 0 */
- if (usBX & 0x0100) { /* serial port B is present */
- if (usCX & 1) { /* serial port is enabled */
- if ((usSI & 0xFF) == mwave_uart_irq) {
- pr_err("%s: Serial port B irq %x conflicts with mwave_uart_irq %x\n",
- __func__, usSI & 0xFF, mwave_uart_irq);
- goto exit_conflict;
- } else {
- if ((usSI >> 8) == uartio_index) {
- pr_err("%s: Serial port B base I/O address %x conflicts with mwave uart I/O %x\n",
- __func__, ausUartBases[usSI >> 8],
- ausUartBases[uartio_index]);
- goto exit_conflict;
- }
- }
- }
- }
-
- /* Check IR port */
- bRC = smapi_request(0x1700, 0x0000, 0, 0,
- &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
- if (bRC) goto exit_smapi_request_error;
- bRC = smapi_request(0x1704, 0x0000, 0, 0,
- &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
- if (bRC) goto exit_smapi_request_error;
- /* bRC == 0 */
- if ((usCX & 0xff) != 0xff) { /* IR port not disabled */
- if ((usCX & 0xff) == mwave_uart_irq) {
- pr_err("%s: IR port irq %x conflicts with mwave_uart_irq %x\n",
- __func__, usCX & 0xff, mwave_uart_irq);
- goto exit_conflict;
- } else {
- if ((usSI & 0xff) == uartio_index) {
- pr_err("%s: IR port base I/O address %x conflicts with mwave uart I/O %x\n",
- __func__, ausUartBases[usSI & 0xff],
- ausUartBases[uartio_index]);
- goto exit_conflict;
- }
- }
- }
- }
-
- bRC = smapi_request(0x1802, 0x0000, 0, 0,
- &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
- if (bRC) goto exit_smapi_request_error;
-
- if (mwave_3780i_io) {
- usDI = dspio_index;
- }
- if (mwave_3780i_irq) {
- usSI = (usSI & 0xff00) | mwave_3780i_irq;
- }
-
- bRC = smapi_request(0x1803, 0x0101, usDI, usSI,
- &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
- if (bRC) goto exit_smapi_request_error;
-
- bRC = smapi_request(0x1804, 0x0000, 0, 0,
- &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
- if (bRC) goto exit_smapi_request_error;
-
- if (mwave_uart_io) {
- usSI = (usSI & 0x00ff) | (uartio_index << 8);
- }
- if (mwave_uart_irq) {
- usSI = (usSI & 0xff00) | mwave_uart_irq;
- }
- bRC = smapi_request(0x1805, 0x0101, 0, usSI,
- &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
- if (bRC) goto exit_smapi_request_error;
-
- bRC = smapi_request(0x1802, 0x0000, 0, 0,
- &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
- if (bRC) goto exit_smapi_request_error;
-
- bRC = smapi_request(0x1804, 0x0000, 0, 0,
- &usAX, &usBX, &usCX, &usDX, &usDI, &usSI);
- if (bRC) goto exit_smapi_request_error;
-
-/* normal exit: */
- return 0;
-
-exit_conflict:
- /* Message has already been printed */
- return -EIO;
-
-exit_smapi_request_error:
- pr_err("%s: exit on smapi_request error bRC %x\n", __func__, bRC);
- return bRC;
-}
-
-
-int smapi_set_DSP_power_state(bool bOn)
-{
- unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
- unsigned short usPowerFunction;
-
- usPowerFunction = (bOn) ? 1 : 0;
-
- return smapi_request(0x4901, 0x0000, 0, usPowerFunction, &usAX, &usBX, &usCX, &usDX, &usDI,
- &usSI);
-}
-
-int smapi_init(void)
-{
- int retval = -EIO;
- unsigned short usSmapiID = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&rtc_lock, flags);
- usSmapiID = CMOS_READ(0x7C);
- usSmapiID |= (CMOS_READ(0x7D) << 8);
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- if (usSmapiID == 0x5349) {
- spin_lock_irqsave(&rtc_lock, flags);
- g_usSmapiPort = CMOS_READ(0x7E);
- g_usSmapiPort |= (CMOS_READ(0x7F) << 8);
- spin_unlock_irqrestore(&rtc_lock, flags);
- if (g_usSmapiPort == 0) {
- pr_err("%s: ERROR unable to read from SMAPI port\n", __func__);
- } else {
- retval = 0;
- //SmapiQuerySystemID();
- }
- } else {
- pr_err("%s: ERROR invalid usSmapiID\n", __func__);
- retval = -ENXIO;
- }
-
- return retval;
-}
+++ /dev/null
-/*
-*
-* smapi.h -- declarations for SMAPI interface routines
-*
-*
-* Written By: Mike Sullivan IBM Corporation
-*
-* Copyright (C) 1999 IBM Corporation
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation; either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* NO WARRANTY
-* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-* solely responsible for determining the appropriateness of using and
-* distributing the Program and assumes all risks associated with its
-* exercise of rights under this Agreement, including but not limited to
-* the risks and costs of program errors, damage to or loss of data,
-* programs or equipment, and unavailability or interruption of operations.
-*
-* DISCLAIMER OF LIABILITY
-* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*
-*
-* 10/23/2000 - Alpha Release
-* First release to the public
-*/
-
-#ifndef _LINUX_SMAPI_H
-#define _LINUX_SMAPI_H
-
-struct smapi_dsp_settings {
- int bDSPPresent;
- int bDSPEnabled;
- int bModemEnabled;
- int bMIDIEnabled;
- int bSblstEnabled;
- unsigned short usDspIRQ;
- unsigned short usDspDMA;
- unsigned short usDspBaseIO;
- unsigned short usUartIRQ;
- unsigned short usUartBaseIO;
- unsigned short usMidiIRQ;
- unsigned short usMidiBaseIO;
- unsigned short usSndblstIRQ;
- unsigned short usSndblstDMA;
- unsigned short usSndblstBaseIO;
-};
-
-int smapi_init(void);
-int smapi_query_DSP_cfg(struct smapi_dsp_settings *pSettings);
-int smapi_set_DSP_cfg(void);
-int smapi_set_DSP_power_state(bool bOn);
-
-
-#endif
+++ /dev/null
-/*
-*
-* tp3780i.c -- board driver for 3780i on ThinkPads
-*
-*
-* Written By: Mike Sullivan IBM Corporation
-*
-* Copyright (C) 1999 IBM Corporation
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation; either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* NO WARRANTY
-* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-* solely responsible for determining the appropriateness of using and
-* distributing the Program and assumes all risks associated with its
-* exercise of rights under this Agreement, including but not limited to
-* the risks and costs of program errors, damage to or loss of data,
-* programs or equipment, and unavailability or interruption of operations.
-*
-* DISCLAIMER OF LIABILITY
-* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*
-*
-* 10/23/2000 - Alpha Release
-* First release to the public
-*/
-
-#define pr_fmt(fmt) "tp3780i: " fmt
-
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-#include "smapi.h"
-#include "mwavedd.h"
-#include "tp3780i.h"
-#include "3780i.h"
-#include "mwavepub.h"
-
-static unsigned short s_ausThinkpadIrqToField[16] =
- { 0xFFFF, 0xFFFF, 0xFFFF, 0x0001, 0x0002, 0x0003, 0xFFFF, 0x0004,
- 0xFFFF, 0xFFFF, 0x0005, 0x0006, 0xFFFF, 0xFFFF, 0xFFFF, 0x0007 };
-static unsigned short s_ausThinkpadDmaToField[8] =
- { 0x0001, 0x0002, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x0003, 0x0004 };
-static unsigned short s_numIrqs = 16, s_numDmas = 8;
-
-
-static void EnableSRAM(struct thinkpad_bd_data *pBDData)
-{
- struct dsp_3780i_config_settings *pSettings = &pBDData->rDspSettings;
- unsigned short usDspBaseIO = pSettings->usDspBaseIO;
- DSP_GPIO_OUTPUT_DATA_15_8 rGpioOutputData;
- DSP_GPIO_DRIVER_ENABLE_15_8 rGpioDriverEnable;
- DSP_GPIO_MODE_15_8 rGpioMode;
-
- MKWORD(rGpioMode) = ReadMsaCfg(DSP_GpioModeControl_15_8);
- rGpioMode.GpioMode10 = 0;
- WriteMsaCfg(DSP_GpioModeControl_15_8, MKWORD(rGpioMode));
-
- MKWORD(rGpioDriverEnable) = 0;
- rGpioDriverEnable.Enable10 = true;
- rGpioDriverEnable.Mask10 = true;
- WriteMsaCfg(DSP_GpioDriverEnable_15_8, MKWORD(rGpioDriverEnable));
-
- MKWORD(rGpioOutputData) = 0;
- rGpioOutputData.Latch10 = 0;
- rGpioOutputData.Mask10 = true;
- WriteMsaCfg(DSP_GpioOutputData_15_8, MKWORD(rGpioOutputData));
-}
-
-
-static irqreturn_t UartInterrupt(int irq, void *dev_id)
-{
- return IRQ_HANDLED;
-}
-
-static irqreturn_t DspInterrupt(int irq, void *dev_id)
-{
- struct mwave_device_data *pDrvData = &mwave_s_mdd;
- struct dsp_3780i_config_settings *pSettings = &pDrvData->rBDData.rDspSettings;
- unsigned short usDspBaseIO = pSettings->usDspBaseIO;
- unsigned short usIPCSource = 0, usIsolationMask, usPCNum;
-
- if (dsp3780I_GetIPCSource(usDspBaseIO, &usIPCSource) == 0) {
- usIsolationMask = 1;
- for (usPCNum = 1; usPCNum <= 16; usPCNum++) {
- if (usIPCSource & usIsolationMask) {
- usIPCSource &= ~usIsolationMask;
- if (pDrvData->IPCs[usPCNum - 1].usIntCount == 0) {
- pDrvData->IPCs[usPCNum - 1].usIntCount = 1;
- }
- if (pDrvData->IPCs[usPCNum - 1].bIsEnabled == true) {
- wake_up_interruptible(&pDrvData->IPCs[usPCNum - 1].ipc_wait_queue);
- }
- }
- if (usIPCSource == 0)
- break;
- /* try next IPC */
- usIsolationMask = usIsolationMask << 1;
- }
- }
- return IRQ_HANDLED;
-}
-
-
-int tp3780I_InitializeBoardData(struct thinkpad_bd_data *pBDData)
-{
- int retval = 0;
- struct dsp_3780i_config_settings *pSettings = &pBDData->rDspSettings;
-
- pBDData->bDSPEnabled = false;
- pSettings->bInterruptClaimed = false;
-
- retval = smapi_init();
- if (retval) {
- pr_err("%s: Error: SMAPI is not available on this machine\n", __func__);
- } else {
- if (mwave_3780i_irq || mwave_3780i_io || mwave_uart_irq || mwave_uart_io) {
- retval = smapi_set_DSP_cfg();
- }
- }
-
- return retval;
-}
-
-void tp3780I_Cleanup(struct thinkpad_bd_data *pBDData)
-{
-}
-
-int tp3780I_CalcResources(struct thinkpad_bd_data *pBDData)
-{
- struct smapi_dsp_settings rSmapiInfo;
- struct dsp_3780i_config_settings *pSettings = &pBDData->rDspSettings;
-
- if (smapi_query_DSP_cfg(&rSmapiInfo)) {
- pr_err("%s: Error: Could not query DSP config. Aborting.\n", __func__);
- return -EIO;
- }
-
- /* Sanity check */
- if (
- ( rSmapiInfo.usDspIRQ == 0 )
- || ( rSmapiInfo.usDspBaseIO == 0 )
- || ( rSmapiInfo.usUartIRQ == 0 )
- || ( rSmapiInfo.usUartBaseIO == 0 )
- ) {
- pr_err("%s: Error: Illegal resource setting. Aborting.\n", __func__);
- return -EIO;
- }
-
- pSettings->bDSPEnabled = (rSmapiInfo.bDSPEnabled && rSmapiInfo.bDSPPresent);
- pSettings->bModemEnabled = rSmapiInfo.bModemEnabled;
- pSettings->usDspIrq = rSmapiInfo.usDspIRQ;
- pSettings->usDspDma = rSmapiInfo.usDspDMA;
- pSettings->usDspBaseIO = rSmapiInfo.usDspBaseIO;
- pSettings->usUartIrq = rSmapiInfo.usUartIRQ;
- pSettings->usUartBaseIO = rSmapiInfo.usUartBaseIO;
-
- pSettings->uDStoreSize = TP_ABILITIES_DATA_SIZE;
- pSettings->uIStoreSize = TP_ABILITIES_INST_SIZE;
- pSettings->uIps = TP_ABILITIES_INTS_PER_SEC;
-
- if (pSettings->bDSPEnabled && pSettings->bModemEnabled && pSettings->usDspIrq == pSettings->usUartIrq) {
- pBDData->bShareDspIrq = pBDData->bShareUartIrq = 1;
- } else {
- pBDData->bShareDspIrq = pBDData->bShareUartIrq = 0;
- }
-
- return 0;
-}
-
-
-int tp3780I_ClaimResources(struct thinkpad_bd_data *pBDData)
-{
- int retval = 0;
- struct dsp_3780i_config_settings *pSettings = &pBDData->rDspSettings;
- struct resource *pres;
-
- pres = request_region(pSettings->usDspBaseIO, 16, "mwave_3780i");
- if ( pres == NULL ) retval = -EIO;
-
- if (retval) {
- pr_err("%s: Error: Could not claim I/O region starting at %x\n", __func__,
- pSettings->usDspBaseIO);
- return -EIO;
- }
-
- return retval;
-}
-
-int tp3780I_ReleaseResources(struct thinkpad_bd_data *pBDData)
-{
- struct dsp_3780i_config_settings *pSettings = &pBDData->rDspSettings;
-
- release_region(pSettings->usDspBaseIO & (~3), 16);
-
- if (pSettings->bInterruptClaimed) {
- free_irq(pSettings->usDspIrq, NULL);
- pSettings->bInterruptClaimed = false;
- }
-
- return 0;
-}
-
-
-
-int tp3780I_EnableDSP(struct thinkpad_bd_data *pBDData)
-{
- struct dsp_3780i_config_settings *pSettings = &pBDData->rDspSettings;
- bool bDSPPoweredUp = false, bInterruptAllocated = false;
-
- if (pBDData->bDSPEnabled) {
- pr_err("%s: Error: DSP already enabled!\n", __func__);
- goto exit_cleanup;
- }
-
- if (!pSettings->bDSPEnabled) {
- pr_err("%s: Error: pSettings->bDSPEnabled not set\n", __func__);
- goto exit_cleanup;
- }
-
- if (
- (pSettings->usDspIrq >= s_numIrqs)
- || (pSettings->usDspDma >= s_numDmas)
- || (s_ausThinkpadIrqToField[pSettings->usDspIrq] == 0xFFFF)
- || (s_ausThinkpadDmaToField[pSettings->usDspDma] == 0xFFFF)
- ) {
- pr_err("%s: Error: invalid irq %x\n", __func__, pSettings->usDspIrq);
- goto exit_cleanup;
- }
-
- if (
- ((pSettings->usDspBaseIO & 0xF00F) != 0)
- || (pSettings->usDspBaseIO & 0x0FF0) == 0
- ) {
- pr_err("%s: Error: Invalid DSP base I/O address %x\n", __func__,
- pSettings->usDspBaseIO);
- goto exit_cleanup;
- }
-
- if (pSettings->bModemEnabled) {
- if (
- pSettings->usUartIrq >= s_numIrqs
- || s_ausThinkpadIrqToField[pSettings->usUartIrq] == 0xFFFF
- ) {
- pr_err("%s: Error: Invalid UART IRQ %x\n", __func__, pSettings->usUartIrq);
- goto exit_cleanup;
- }
- switch (pSettings->usUartBaseIO) {
- case 0x03F8:
- case 0x02F8:
- case 0x03E8:
- case 0x02E8:
- break;
-
- default:
- pr_err("%s: Error: Invalid UART base I/O address %x\n", __func__,
- pSettings->usUartBaseIO);
- goto exit_cleanup;
- }
- }
-
- pSettings->bDspIrqActiveLow = pSettings->bDspIrqPulse = true;
- pSettings->bUartIrqActiveLow = pSettings->bUartIrqPulse = true;
-
- if (pBDData->bShareDspIrq) {
- pSettings->bDspIrqActiveLow = false;
- }
- if (pBDData->bShareUartIrq) {
- pSettings->bUartIrqActiveLow = false;
- }
-
- pSettings->usNumTransfers = TP_CFG_NumTransfers;
- pSettings->usReRequest = TP_CFG_RerequestTimer;
- pSettings->bEnableMEMCS16 = TP_CFG_MEMCS16;
- pSettings->usIsaMemCmdWidth = TP_CFG_IsaMemCmdWidth;
- pSettings->bGateIOCHRDY = TP_CFG_GateIOCHRDY;
- pSettings->bEnablePwrMgmt = TP_CFG_EnablePwrMgmt;
- pSettings->usHBusTimerLoadValue = TP_CFG_HBusTimerValue;
- pSettings->bDisableLBusTimeout = TP_CFG_DisableLBusTimeout;
- pSettings->usN_Divisor = TP_CFG_N_Divisor;
- pSettings->usM_Multiplier = TP_CFG_M_Multiplier;
- pSettings->bPllBypass = TP_CFG_PllBypass;
- pSettings->usChipletEnable = TP_CFG_ChipletEnable;
-
- if (request_irq(pSettings->usUartIrq, &UartInterrupt, 0, "mwave_uart", NULL)) {
- pr_err("%s: Error: Could not get UART IRQ %x\n", __func__, pSettings->usUartIrq);
- goto exit_cleanup;
- } else { /* no conflict just release */
- free_irq(pSettings->usUartIrq, NULL);
- }
-
- if (request_irq(pSettings->usDspIrq, &DspInterrupt, 0, "mwave_3780i", NULL)) {
- pr_err("%s: Error: Could not get 3780i IRQ %x\n", __func__, pSettings->usDspIrq);
- goto exit_cleanup;
- } else {
- bInterruptAllocated = true;
- pSettings->bInterruptClaimed = true;
- }
-
- smapi_set_DSP_power_state(false);
- if (smapi_set_DSP_power_state(true)) {
- pr_err("%s: Error: smapi_set_DSP_power_state(true) failed\n", __func__);
- goto exit_cleanup;
- } else {
- bDSPPoweredUp = true;
- }
-
- if (dsp3780I_EnableDSP(pSettings, s_ausThinkpadIrqToField, s_ausThinkpadDmaToField)) {
- pr_err("%s: Error: dsp7880I_EnableDSP() failed\n", __func__);
- goto exit_cleanup;
- }
-
- EnableSRAM(pBDData);
-
- pBDData->bDSPEnabled = true;
-
- return 0;
-
-exit_cleanup:
- pr_err("%s: Cleaning up\n", __func__);
- if (bDSPPoweredUp)
- smapi_set_DSP_power_state(false);
- if (bInterruptAllocated) {
- free_irq(pSettings->usDspIrq, NULL);
- pSettings->bInterruptClaimed = false;
- }
- return -EIO;
-}
-
-
-int tp3780I_DisableDSP(struct thinkpad_bd_data *pBDData)
-{
- struct dsp_3780i_config_settings *pSettings = &pBDData->rDspSettings;
-
- if (pBDData->bDSPEnabled) {
- dsp3780I_DisableDSP(&pBDData->rDspSettings);
- if (pSettings->bInterruptClaimed) {
- free_irq(pSettings->usDspIrq, NULL);
- pSettings->bInterruptClaimed = false;
- }
- smapi_set_DSP_power_state(false);
- pBDData->bDSPEnabled = false;
- }
-
- return 0;
-}
-
-
-int tp3780I_ResetDSP(struct thinkpad_bd_data *pBDData)
-{
- struct dsp_3780i_config_settings *pSettings = &pBDData->rDspSettings;
-
- if (dsp3780I_Reset(pSettings) == 0) {
- EnableSRAM(pBDData);
- return 0;
- }
- return -EIO;
-}
-
-
-int tp3780I_StartDSP(struct thinkpad_bd_data *pBDData)
-{
- struct dsp_3780i_config_settings *pSettings = &pBDData->rDspSettings;
-
- if (dsp3780I_Run(pSettings) == 0) {
- // @BUG @TBD EnableSRAM(pBDData);
- } else {
- return -EIO;
- }
-
- return 0;
-}
-
-
-int tp3780I_QueryAbilities(struct thinkpad_bd_data *pBDData, struct mw_abilities *pAbilities)
-{
- memset(pAbilities, 0, sizeof(*pAbilities));
- /* fill out standard constant fields */
- pAbilities->instr_per_sec = pBDData->rDspSettings.uIps;
- pAbilities->data_size = pBDData->rDspSettings.uDStoreSize;
- pAbilities->inst_size = pBDData->rDspSettings.uIStoreSize;
- pAbilities->bus_dma_bw = pBDData->rDspSettings.uDmaBandwidth;
-
- /* fill out dynamically determined fields */
- pAbilities->component_list[0] = 0x00010000 | MW_ADC_MASK;
- pAbilities->component_list[1] = 0x00010000 | MW_ACI_MASK;
- pAbilities->component_list[2] = 0x00010000 | MW_AIC1_MASK;
- pAbilities->component_list[3] = 0x00010000 | MW_AIC2_MASK;
- pAbilities->component_list[4] = 0x00010000 | MW_CDDAC_MASK;
- pAbilities->component_list[5] = 0x00010000 | MW_MIDI_MASK;
- pAbilities->component_list[6] = 0x00010000 | MW_UART_MASK;
- pAbilities->component_count = 7;
-
- /* Fill out Mwave OS and BIOS task names */
-
- memcpy(pAbilities->mwave_os_name, TP_ABILITIES_MWAVEOS_NAME,
- sizeof(TP_ABILITIES_MWAVEOS_NAME));
- memcpy(pAbilities->bios_task_name, TP_ABILITIES_BIOSTASK_NAME,
- sizeof(TP_ABILITIES_BIOSTASK_NAME));
-
- return 0;
-}
-
-int tp3780I_ReadWriteDspDStore(struct thinkpad_bd_data *pBDData, unsigned int uOpcode,
- void __user *pvBuffer, unsigned int uCount,
- unsigned long ulDSPAddr)
-{
- struct dsp_3780i_config_settings *pSettings = &pBDData->rDspSettings;
- unsigned short usDspBaseIO = pSettings->usDspBaseIO;
- bool bRC = 0;
-
- if (pBDData->bDSPEnabled) {
- switch (uOpcode) {
- case IOCTL_MW_READ_DATA:
- bRC = dsp3780I_ReadDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
- break;
-
- case IOCTL_MW_READCLEAR_DATA:
- bRC = dsp3780I_ReadAndClearDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
- break;
-
- case IOCTL_MW_WRITE_DATA:
- bRC = dsp3780I_WriteDStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
- break;
- }
- }
-
- return bRC ? -EIO : 0;
-}
-
-
-int tp3780I_ReadWriteDspIStore(struct thinkpad_bd_data *pBDData, unsigned int uOpcode,
- void __user *pvBuffer, unsigned int uCount,
- unsigned long ulDSPAddr)
-{
- struct dsp_3780i_config_settings *pSettings = &pBDData->rDspSettings;
- unsigned short usDspBaseIO = pSettings->usDspBaseIO;
- bool bRC = 0;
-
- if (pBDData->bDSPEnabled) {
- switch (uOpcode) {
- case IOCTL_MW_READ_INST:
- bRC = dsp3780I_ReadIStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
- break;
-
- case IOCTL_MW_WRITE_INST:
- bRC = dsp3780I_WriteIStore(usDspBaseIO, pvBuffer, uCount, ulDSPAddr);
- break;
- }
- }
-
- return bRC ? -EIO : 0;
-}
-
+++ /dev/null
-/*
-*
-* tp3780i.h -- declarations for tp3780i.c
-*
-*
-* Written By: Mike Sullivan IBM Corporation
-*
-* Copyright (C) 1999 IBM Corporation
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation; either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* NO WARRANTY
-* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
-* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
-* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
-* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
-* solely responsible for determining the appropriateness of using and
-* distributing the Program and assumes all risks associated with its
-* exercise of rights under this Agreement, including but not limited to
-* the risks and costs of program errors, damage to or loss of data,
-* programs or equipment, and unavailability or interruption of operations.
-*
-* DISCLAIMER OF LIABILITY
-* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
-* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
-* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
-* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
-* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
-* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*
-*
-* 10/23/2000 - Alpha Release
-* First release to the public
-*/
-
-#ifndef _LINUX_TP3780I_H
-#define _LINUX_TP3780I_H
-
-#include <asm/io.h>
-#include "mwavepub.h"
-
-
-/* DSP abilities constants for 3780i based Thinkpads */
-#define TP_ABILITIES_INTS_PER_SEC 39160800
-#define TP_ABILITIES_DATA_SIZE 32768
-#define TP_ABILITIES_INST_SIZE 32768
-#define TP_ABILITIES_MWAVEOS_NAME "mwaveos0700.dsp"
-#define TP_ABILITIES_BIOSTASK_NAME "mwbio701.dsp"
-
-
-/* DSP configuration values for 3780i based Thinkpads */
-#define TP_CFG_NumTransfers 3 /* 16 transfers */
-#define TP_CFG_RerequestTimer 1 /* 2 usec */
-#define TP_CFG_MEMCS16 0 /* Disabled, 16-bit memory assumed */
-#define TP_CFG_IsaMemCmdWidth 3 /* 295 nsec (16-bit) */
-#define TP_CFG_GateIOCHRDY 0 /* No IOCHRDY gating */
-#define TP_CFG_EnablePwrMgmt 1 /* Enable low poser suspend/resume */
-#define TP_CFG_HBusTimerValue 255 /* HBus timer load value */
-#define TP_CFG_DisableLBusTimeout 0 /* Enable LBus timeout */
-#define TP_CFG_N_Divisor 32 /* Clock = 39.1608 Mhz */
-#define TP_CFG_M_Multiplier 37 /* " */
-#define TP_CFG_PllBypass 0 /* don't bypass */
-#define TP_CFG_ChipletEnable 0xFFFF /* Enable all chiplets */
-
-struct thinkpad_bd_data {
- int bDSPEnabled;
- int bShareDspIrq;
- int bShareUartIrq;
- struct dsp_3780i_config_settings rDspSettings;
-};
-
-int tp3780I_InitializeBoardData(struct thinkpad_bd_data *pBDData);
-int tp3780I_CalcResources(struct thinkpad_bd_data *pBDData);
-int tp3780I_ClaimResources(struct thinkpad_bd_data *pBDData);
-int tp3780I_ReleaseResources(struct thinkpad_bd_data *pBDData);
-int tp3780I_EnableDSP(struct thinkpad_bd_data *pBDData);
-int tp3780I_DisableDSP(struct thinkpad_bd_data *pBDData);
-int tp3780I_ResetDSP(struct thinkpad_bd_data *pBDData);
-int tp3780I_StartDSP(struct thinkpad_bd_data *pBDData);
-int tp3780I_QueryAbilities(struct thinkpad_bd_data *pBDData, struct mw_abilities *pAbilities);
-void tp3780I_Cleanup(struct thinkpad_bd_data *pBDData);
-int tp3780I_ReadWriteDspDStore(struct thinkpad_bd_data *pBDData, unsigned int uOpcode,
- void __user *pvBuffer, unsigned int uCount,
- unsigned long ulDSPAddr);
-int tp3780I_ReadWriteDspIStore(struct thinkpad_bd_data *pBDData, unsigned int uOpcode,
- void __user *pvBuffer, unsigned int uCount,
- unsigned long ulDSPAddr);
-
-
-#endif
#define PXA3XX_GCU_MINOR 197
#define TUN_MINOR 200
#define CUSE_MINOR 203
-#define MWAVE_MINOR 219 /* ACP/Mwave Modem */
#define MPT_MINOR 220
#define MPT2SAS_MINOR 221
#define MPT3SAS_MINOR 222
projects / thirdparty / kernel / linux.git / commitdiff
