qualcommax: eap623od-hd-v1: fix phy node and LED config

The reason phy fails to probe without explicitly overrided phy id is
that the reset timing fails to match. Fix it with proper `reset-delay-us` and
`reset-post-delay-us`.

While at it, change LED settings to match EAP610-Outdoor.

Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18450
Signed-off-by: Robert Marko <robimarko@gmail.com>

diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623od-hd-v1.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623od-hd-v1.dts
index a4e49c9d6fcd94cf681c07e68a6ce8ec2483925a..f54593a08bf0dae748673fd6d58e19dc070d599e 100644 (file)
--- a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623od-hd-v1.dts
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6018-eap623od-hd-v1.dts
@@ -16,10 +16,10 @@
 
        aliases {
                serial0 = &blsp1_uart3;
-               led-boot = &led_system;
-               led-failsafe = &led_system;
-               led-running = &led_system;
-               led-upgrade = &led_system;
+               led-boot = &led_sys_green;
+               led-failsafe = &led_sys_yellow;
+               led-running = &led_sys_green;
+               led-upgrade = &led_sys_yellow;
        };
 
        chosen {
@@ -40,15 +40,15 @@
        leds {
                compatible = "gpio-leds";
 
-               led_system: system {
+               led_sys_green: led-0 {
                        color = <LED_COLOR_ID_GREEN>;
                        function = LED_FUNCTION_STATUS;
                        gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
                };
 
-               wlan {
+               led_sys_yellow: led-1 {
                        color = <LED_COLOR_ID_YELLOW>;
-                       function = LED_FUNCTION_WLAN;
+                       function = LED_FUNCTION_STATUS;
                        gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
                };
        };
@@ -86,15 +86,14 @@
 
 &mdio {
        status = "okay";
-       pinctrl-0 = <&mdio_pins>;
+       reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
+       reset-delay-us = <10000>;
+       reset-post-delay-us = <50000>;
+       pinctrl-0 = <&mdio_pins>, <&phy_pins>;
        pinctrl-names = "default";
 
        rtl8211f: ethernet-phy@4 {
-               compatible = "ethernet-phy-id001c.c916";
                reg = <4>;
-               reset-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
-               pinctrl-0 = <&phy_pins>;
-               pinctrl-names = "default";
 
                realtek,clkout-disable;
                realtek,aldps-enable;