arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level

[ Upstream commit e0d8678c2f09dca22e6197321f223fa9a0ca2839 ]

light sensor isl29023 share the interrupt with lsm303arg, but these
two devices use different interrupt type. According to the datasheet
of these two devides, both support low level trigger type, so correct
the interrupt type here to avoid the following error log:

  irq: type mismatch, failed to map hwirq-11 for gpio@5d0c0000!

Fixes: 9918092cbb0e ("arm64: dts: imx8qm-mek: add i2c0 and children devices")
Fixes: 1d8a9f043a77 ("arm64: dts: imx8: use defines for interrupts")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 9c0b6b8d6459de4247a9aab77b1abaf86a4113a9..d4b13cfd87a92009de52c11e3ddfb03e84812630 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -560,7 +560,7 @@
                compatible = "isil,isl29023";
                reg = <0x44>;
                interrupt-parent = <&lsio_gpio4>;
-               interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+               interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
        };
 
        pressure-sensor@60 {