-1998-12-02 Gary V. Vaughan <gvaughan@oranda.demon.co.uk>\r
-\r
- * libltdl/configure.in: look for string.h or else strings.h, and\r
- also check for ANSI strrchr() function. Fix `undescore before\r
- symbols' macro to not rely on a.out (cygwin uses a.exe!). Fix\r
- `underscore for dlsym' to set cache variable properly, not just in\r
- environment of AC_DEFINE(NEED_USCORE).\r
- * libltdl/ltdl.h (__ptr_t): for K&R compatibility using char*.\r
- * libltdl/ltdl.c (strrchr): fallback function incase none is\r
- defined in libc.\r
- (trim, ltdlopen): replace rindex with ANSI strrchr.\r
- Add static function declarations so that we get type checking with\r
- ANSI compilers. Use __ptr_t instead of void*.\r
-\r
-1998-12-01 Thomas Tanner <tanner@gmx.de>\r
-\r
- * ltconfig.in: added -export-symbols support for GNU ld and\r
- Solaris (untested), archive_sym_cmds for -export-symbols\r
- * doc/libtool.texi, ltmain.in: -export-symbols is now\r
- independent from -export-dynamic and does not work for modules \r
- anymore\r
- * ltmain.in: added some checks for -export-symbols\r
- * mdemo/modules/Makefile.am: replaced -export-symbols with \r
- -export-dynamic since it doesn't work for modules\r
- \r
-1998-12-01 Gary V. Vaughan <gvaughan@oranda.demon.co.uk>\r
-\r
- * README: Updated homepage pointer to gnu libtool page.\r
-\r
- * ltconfig.in (ltdll.c): update the ltdll.c file for cygwinb20.\r
- Based on code from Mumit Khan <khan@xraylith.wisc.edu>.\r
- (archive_cmds): correct typo libtool.c->ltdll.c. Update shell\r
- commands for cygwin32.\r
-\r
- * libtool.m4 (AM_SYS_SYMBOL_UNDERSCORE): New macro; find out\r
- whether compiled symbols have an extra leading underscore.\r
- (AM_SYS_NM_PARSE): New macro (converted to m4 from ltconfig.in);\r
- find a sed expression to parse global symbols from the output of\r
- $NM.\r
- (AM_PROG_LIBTOOL): require AM_SYS_NM_PARSE and\r
- AM_SYS_SYMBOL_UNDERSCORE.\r
- * demo/dlmain.c (main): Remove a single leading underscore from\r
- compiled symbol names if necessary.\r
-\r
-1998-12-01 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * config.guess, config.sub: imported from autoconf pre-2.13\r
-\r
-1998-11-27 Gary V. Vaughan <gvaughan@oranda.demon.co.uk>\r
-\r
- * libtool (AM_PROG_LD): Oops... we need to know the host_os for\r
- the changes below. I'm not sure whether mingw32 and os2 support\r
- UNC paths, if they did we wouldn't need the check, we could use\r
- UNC paths on all three; or if the bug with $LD not being\r
- shell-meta escaped was fixed, we could use '\\' separators on all\r
- three. AC_REQUIRE'ed AC_CANONICAL_HOST.\r
- \r
- * libtool.m4 (AM_PROG_LD): Cannonicalize the absolute path for the\r
- ld program; The order is funny to provide canonicalization to\r
- paths with '\\' separators as well as '/'.\r
- * ltconfig.in: ditto.\r
-\r
- * AUTHORS: Added myself as a co-maintainer.\r
-\r
- * ltconfig.in (archive_cmds): The `;\' in a compound statement is\r
- expanded wrongly for cygwin32, mingw32, aix3 and aix4. Changed to\r
- `;'.\r
-\r
-1998-11-25 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * libtool.spec (URL): point to www.gnu.org\r
- (Source): point to ftp.gnu.org\r
-\r
- * Makefile.am (EXTRA_DIST): removed libtool.prj\r
- Reported by Akim Demaille <demaille@inf.enst.fr>\r
-\r
-1998-11-24 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * ltconfig.in (echo): avoid shell error messages when we're\r
- testing for large command line support\r
- Reported by Axel Thimm <Axel.Thimm@physik.fu-berlin.de>\r
-\r
- * doc/PLATFORMS: updated last-tested release for platforms I've\r
- got access to\r
-\r
- * THANKS: added Chris P. Ross\r
-\r
-1998-11-24 Chris P. Ross <cross@eng.us.uu.net>\r
-\r
- * ltconfig.in: added recognition of the dynamic linker on BSD/OS 4.x\r
- * README: added BSD/OS 4.x to the list of supported platforms\r
- * doc/PLATFORMS: added BSD/OS 4.x support for various host id's\r
-\r
-1998-11-24 David Heine <dlheine@truffle.Stanford.EDU>\r
-\r
- * ltmain.in (pass_all): actively pass the flags\r
-\r
-1998-11-24 Thomas Tanner <tanner@gmx.de>\r
-\r
- * depdemo: added inter-library dependencies demo (doesn't work yet!)\r
- * AUTHORS: added myself to the list of maintainers\r
-\r
-1998-11-22 Thomas Tanner <tanner@gmx.de>\r
-\r
- * libltdl: added support for .la files, LGPL license,\r
- K&R compatibility, some API changes and bugfixes\r
- * ltmain.in: renamed -module flag (for compiling) to -force-static,\r
- define -DSTATIC when compiling static .o files,\r
- do not include directories in dld_preloaded_symbols\r
- * mdemo: modified mdemo to work with the new libltdl\r
- * tests/mdemo-exec.test, tests/mdemo-inst.test: use .la files\r
- \r
-1998-11-21 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * libltdl/ltdl.c: replace NULL with 0, so that we don't depend on\r
- header files defining it.\r
-\r
- * ltconfig.in (archive_cmds, osf3, osf4, solaris, sunos4): create\r
- libraries with gcc -shared if using gcc without GNU ld.\r
-\r
- * ltconfig.in: replaced occurrences of solaris2 with solaris, to\r
- prepare for Solaris 7\r
-\r
-1998-11-19 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * mdemo/Makefile.am (hell_debug_LDFLAGS): -dlpreopen -> -dlopen\r
- (hell_LDFLAGS): added -export-dynamic and -dlopen\r
- (SUBDIRS, INCLUDES): added modules directory\r
- (foo1.c, foo2.c, foo.h, libfoo1.sym, libfoo2.sym): moved to modules\r
- * Makefile.am: ditto\r
- * tests/mdemo-exec.test, tests/mdemo-inst.test: libraries moved\r
- * mdemo/modules/Makefile.am: new file\r
-\r
- * */Makefile.am (AUTOMAKE_OPTIONS): added no-dependencies\r
-\r
- * ltmain.in: missing `test' between `&&' and `"$module"'\r
-\r
- * ltconfig.in (echo_test_string): the whole ltconfig script was\r
- too much for DU4.0's ksh, but the first 50 lines will be enough.\r
-\r
- * ltmain.in (installed): new variable defined within a .la file,\r
- so that libtool can now link already-installed libraries into a\r
- program.\r
- * NEWS: ditto\r
- * doc/libtool.texi (Linking executables): document it\r
-\r
- * ltmain.in (output_objdir): compute it from $output, not $arg\r
-\r
-1998-11-18 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * NEWS: -module and libtldl\r
- * mdemo/Makefile.am: ../libltdl is within $(srcdir)\r
-\r
-1998-11-18 Thomas Tanner <tanner@gmx.de>\r
-\r
- * libltdl, Makefile.am: added libltdl (a system independent \r
- dlopen wrapper library extracted from mdemo)\r
- * ltmain.in: added -module flag for compiling and linking of\r
- modules. If enabled it compiles always both .o (with -DLT_RENAME)\r
- and .lo files\r
- * mdemo: modified mdemo to work with libltdl\r
- * tests/ltdl*: added tests for libltdl\r
-\r
-1998-11-16 Steve Price <sprice@hiwaay.net>\r
-\r
- * ltconfig.in: when $host_os is freebsd[23]* determine whether\r
- the current linker format is a.out or ELF\r
- * ltmain.in: add two new $version_type's, freebsd-aout and\r
- freebsd-elf, to support above change\r
-\r
-1998-11-16 Stephan Kulow <coolo@kde.org>\r
-\r
- * ltconfig.in: extent no_builtin_flag to contain -fno-rtti and\r
- -fno-exceptions in case we compile with a gcc, that supports\r
- this options (egcs and gcc >= 2.8)\r
-\r
-1998-11-16 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * ltmain.in (C_compiler): copy $CC before it is overwritten with\r
- command-line compiler, so that we can use it to compile C sources\r
- generated during the build. This fixes the problem that showed up \r
- with -export-dynamic of C++ programs in egcs 1.1.\r
- * NEWS: ditto\r
-\r
-1998-11-12 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * PORTING: Porting instructions are in the libtool manual already\r
-\r
- * NEWS: Mention -export-symbols and new dlpreopen\r
-\r
-1998-11-11 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * ltmain.in (IFS): revert Gary's patch when parsing version\r
- information; we still use `:' here :-)\r
-\r
- * NEWS: updated\r
- * PORTING: new file, with general instructions and inter-library\r
- dependencies tips\r
-\r
-1998-11-11 Gary V. Vaughan <gvaughan@oranda.demon.co.uk>\r
-\r
- * ltconfig.in: make use of '~' field separator in reload_cmds,\r
- old_archive_from_new_cmds, old_archive_cmds, archive_cmds,\r
- old_postinstall_cmds, postinstall_cmds, old_postuninstall_cmds,\r
- postuninstall_cmds and finish_cmds, so that the semi-colons inside\r
- if/then/else/fi and for/do/done etc. do not break the eval loop in\r
- ltmain.in (below).\r
- * ltmain.in: changed all of the eval loops to use an IFS of `~',\r
- to allow differentiation between the end-of-statement-;\r
- (now `~' is used) and end-of-substatement-; (still `;'). This\r
- fixes AIX and win32 at least.\r
-\r
-1998-11-11 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * ltconfig.in (sunos*, sympat, symxfrm): remove underscore\r
- prepended by the compiler\r
-\r
-1998-11-10 Toshio Kuratomi <badger@prtr-13.ucsc.edu>\r
-\r
- * ltconfig.in: re-enable deplibs\r
- * ltmain.in: support deplibs, at least for GNU/Linux/x86\r
- Updated to current libtool by Thomas Tanner <tanner@gmx.de>\r
-\r
-1998-11-10 Gordon Matzigkeit <gord@trick.fig.org>\r
-\r
- * ltmain.in (link): Make the relink warning less harsh.\r
-\r
-1998-11-07 William M. Perry <wmperry@aventail.com>\r
-\r
- * ltconfig.in (aix3, aix4): uniquify symbol names in archive_cmds\r
-\r
-1998-11-07 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * ltconfig.in: add --falback-echo, to be used if everything else\r
- fails. The tests now check the behavior of $echo for very large\r
- strings, because some echo commands would just core dump (e.g.,\r
- Solaris' printf). If too large strings fail, smaller ones are\r
- tested.\r
- (ltecho): arrange that, if the --fallback-echo method is selected,\r
- echo will be defined in the libtool script so as to re-run itself,\r
- not ltconfig\r
- * ltmain.in: add --fallback-echo\r
- (qecho) ensure that, if --falback-echo is being used, qecho is\r
- defined with the full pathname of the libtool script\r
-\r
-1998-11-07 Thomas Tanner <tanner@gmx.de>\r
-\r
- * mdemo/main.c: removed hardcoded library names; link against -lm\r
- * tests/mdemo-exec, tests/mdemo-inst: pass the library names\r
- to the program\r
-\r
-1998-11-07 Marc J. Fraioli <fraioli@dg-rtp.dg.com>\r
-\r
- * README: Added DG/UX\r
- * doc/PLATFORMS: ditto\r
-\r
-1998-11-04 Michael Tiemann <tiemann@cygnus.com>\r
-\r
- * ltconfig.in (irix6): it's a little bit different from irix5\r
-\r
-1998-11-04 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * THANKS: Added Thomas Tanner and Gary V. Vaughan\r
-\r
- * ltconfig.in, ltmain.in: updated and fixed the patches below\r
-\r
-1998-11-04 Thomas Tanner <tanner@gmx.de>\r
-\r
- * mdemo/*: added new demo to demonstrate building of dlopenend\r
- modules\r
- * tests/Makefile.am, tests/mdemo*: added some tests for mdemo\r
-\r
-1998-11-04 Gary V. Vaughan <gvaughan@oranda.demon.co.uk>\r
-\r
- * demo/configure.in: added AC_EXEEXT macro so that the tests can\r
- work on cywin32/mingw32 hosts. This requires the current CVS\r
- autoconf\r
-\r
-1998-11-04 Thomas Tanner <tanner@gmx.de>\r
-\r
- * ltmain.in: New flag -export-symbols; new dlpreopen system\r
- * demo/dlmain.c: removed dld_preloaded_symbol_count\r
-\r
-1998-11-04 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * ltmain.in: On installation, don't get confused if the same name\r
- appears more than once in the list of library names.\r
-\r
-1998-11-04 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * ltconfig.in: Add objext and libext variables. Check for object\r
- suffix. Check for mingw32* as well as cygwin32*. Use objext when\r
- testing compiler. Add support for Visual C++ on cygwin32 when not\r
- using gcc. Add objext, libext, and fix_srcfile_path to generated\r
- libtool script.\r
- * ltmain.in: Use .${objext} rather than .o. Use fix_srcfile_path\r
- if it is set. Check for .obj as well as for .o, and for .lib as\r
- well as for .a. Use .${libext} rather than .a when creating old\r
- libraries.\r
- * libtoolize.in: Change initial /bin/sh to @SHELL@.\r
- * libtool.m4 (AM_PROG_LIBTOOL): Add AC_REQUIRE for\r
- AC_CANONICAL_BUILD, so that autoconf doesn't get mixed up by the\r
- AC_REQUIRE in AC_CHECK_TOOL.\r
-\r
-1998-11-04 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * ltconfig.in: Look in the right directory for libtool.c in\r
- archive_cmds for cygwin32.\r
-\r
-1998-11-04 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * ltconfig.in: Fix cygwin32 support to avoid using a double\r
- extension, to delete the def file, to set version_type to windows,\r
- and to include versuffix in the DLL name.\r
- * ltmain.in: Add support for a version_type of windows.\r
-\r
-1998-11-04 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * ltconfig.in: Add cygwin32 support.\r
- * libtool.m4 (AM_PROG_LIBTOOL): Call AM_SYS_LIBTOOL_CYGWIN32 on a\r
- cygwin32 host. Pass DLLTOOL and AS to ltconfig.\r
- (AM_SYS_LIBTOOL_CYGWIN32): New macro.\r
-\r
-1998-11-04 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * libtool.m4 (sco): fix typo\r
-\r
-1998-11-04 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * ltconfig.in: On AIX, don't treat GNU ld specially.\r
-\r
-1998-11-04 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * ltconfig.in (hardcode_minus_L): Revert Ian's patch for\r
- ltconfig.in. Although -L hardcoding is not used with GNU ld, it\r
- does happen, so hardcode_minus_L must be set to yes.\r
-\r
- * ltconfig.in (compiler_o_lo): check whether we can write directly\r
- to a .lo\r
-\r
- * ltmain.in (compiler_o_lo): if not, write to .o and rename it\r
-\r
-1998-11-04 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * ltconfig.in: For sunos4 using GNU ld, set hardcode_minus_L to\r
- no.\r
- * ltmain.in: Add some hacks to make SunOS --enable-shared work\r
- when using GNU ld.\r
-\r
-1998-11-04 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * THANKS: Added Marc J. Fraioli\r
-\r
-1998-11-04 Marc J. Fraioli <fraioli@dg-rtp.dg.com>\r
-\r
- * ltconfig.in (dgux): new supported platforms\r
-\r
-1998-11-04 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * ltconfig.in (need_locks): if neither `-c -o' nor hard links are\r
- available, fallback to not so safe mechanism, by setting\r
- need_locks to warn\r
- * ltmain.in (need_locks): when need_locks is set to warn, use the\r
- lockfile to try to fail in case of incorrect concurrent builds\r
-\r
- * THANKS: Added Eric Estievenart\r
-\r
-1998-11-04 Eric Estievenart <eric@via.ecp.fr>\r
-\r
- * doc/libtool.texi (Compile mode): Document that -o is fully\r
- supported.\r
-\r
- * libtool.m4 (libtool-lock): new ARG_ENABLE; sets (need_locks)\r
- * ltconfig.in (disable-lock): control need_locks\r
- (hard_links): check whether hard-links can be used for locking\r
- * ltmain.in (need_locks): use $output_obj.lock for locking\r
-\r
-1998-11-03 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * ltmain.in: correctly create libraries and programs with\r
- directory components in their names\r
-\r
-1998-11-03 Eric Estievenart <eric@via.ecp.fr>\r
-\r
- * ltmain.in (output_obj): typo\r
-\r
-1998-11-02 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * ltconfig.in: For sunos4, add ${libname}.so$versuffix to\r
- library_names_spec.\r
- * ltmain.in: For version_type of sunos, set versuffix even if\r
- -version-info was not used.\r
-\r
-1998-11-02 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * ltmain.in (libobj): default value must not contain directory\r
- components\r
-\r
-1998-11-02 Eric Estievenart <eric@via.ecp.fr>\r
-\r
- * ltconfig.in (compiler): detect if the compiler supports\r
- -c and -o flags, create a variable compiler_c_o. Also issue\r
- a big warning if it is not supported\r
-\r
- * ltmain.in (compile): enable the -o option as input for libtool.\r
- The objects are not moved if the compiler supports -o with -c.\r
- Sources and objects can contain relative directories.\r
- (link): enable the linking of executables into relative directories\r
-\r
-1998-11-02 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * AUTHORS: added myself as a co-maintainer\r
- * THANKS: and removed my name from here\r
-\r
- * autogen: new script; run it to bootstrap libtool after checking\r
- it out from CVS\r
-\r
- * libtool.m4 (CFLAGS): check whether -belf is needed on SCO, as\r
- suggested by Robert Lipe <robertl@dgii.com>\r
-\r
-1998-10-31 Gordon Matzigkeit <gord@trick.fig.org>\r
-\r
- * demo/Makefile.am (hc-libpath): Use parameters from the libtool\r
- in the top build directory, since the one in the demo directory is\r
- not guaranteed to exist.\r
-\r
-1998-10-27 Alexandre Oliva <oliva@dcc.unicamp.br>\r
-\r
- * demo/Makefile.am (objdir): there are no longer quotes around\r
- objdir in the libtool script\r
-\r
-1998-10-27 Gordon Matzigkeit <gord@trick.fig.org>\r
-\r
- * ltconfig.in (dynamic_linker): Echo the result to fd 6, so that\r
- --silent works correctly. From William M. Perry.\r
-\r
-1998-09-24 Gordon Matzigkeit <gord@trick.fig.org>\r
-\r
- * ltmain.in (link): Fix problems when building only static\r
- libraries. From Owen Taylor.\r
-\r
-1998-08-20 Gordon Matzigkeit <gord@trick.fig.org>\r
-\r
- * ltmain.in (install): When library_names_spec has redundancies,\r
- avoid deleting the main library when installing symlinks. From\r
- Jeff Dairiki.\r
- (link): Get rid of backticks in a here doc comment.\r
- This causes segfaults on Solaris 2. From Aleksandar Bakic.\r
- (finish): Don't display messages\r
-\r
- * ltconfig.in (archive_cmds): On HP-UX 9, make sure we don't try\r
- to move a file to itself. From Jeff Dairiki.\r
-\r
-1998-08-19 Gordon Matzigkeit <gord@trick.fig.org>\r
-\r
- * ltconfig.in: Make changes to accomodate ltmain.c.\r
-\r
- * Makefile.am (clibtool): New target for the C version of libtool.\r
-\r
- * ltmain.c: Experimental C version of libtool.\r
-\r
-1998-07-10 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * ltmain.in (install): Test against both $SHELL and /bin/sh.\r
-\r
-1998-06-30 Gordon Matzigkeit <gord@trick.fig.org>\r
-\r
- * ltmain.in: Convenience archive support. From Ulrich Drepper.\r
-\r
- * ltconfig.in (postinstall_commands): Change libraries to be\r
- executable on Solaris in order to prevent ldd from moaning. From\r
- Julian Gosnell.\r
- (whole_archive_flag_spec): New variable to shortcut convenience\r
- archive expansion. From Ulrich Drepper.\r
-\r
-1998-06-11 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in, ltmain.in: Change globs to accept forward slashes\r
- in absolute directory names used on DOS-like systems. From Robert\r
- S. Maier.\r
-\r
-Thu May 28 18:59:08 1998 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * ltconfig.in: Use $SHELL when invoking shell scripts.\r
-\r
-1998-05-21 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in (compile): Don't have `-static' turn off libtool\r
- libraries, so that people can use it just to guarantee that `.o'\r
- files exist. Suggested by David Mosberger-Tang.\r
-\r
-1998-05-18 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in (link): Possibly reexec the shell from within the\r
- wrapper script.\r
- Allow `-version-info' and `-release' to coexist again. If people\r
- want to shoot themselves in the foot, I'd better let them do so,\r
- so that people who are smart enough not to can squeeze out another\r
- ounce of functionality. From Tim Janik.\r
- (version_vars): Delete dead variable.\r
-\r
- * ltconfig.in (hardcode_minus_L): FreeBSD 3.0 doesn't hardcode, at\r
- last. Reported by Jason Nordwick.\r
-\r
- * libtoolize.in, ltconfig.in, ltmain.in: Change a bunch of `if\r
- test ...; then : ; else ...' constructs to `if test ! ...; then\r
- ...', for clarity.\r
-\r
-1998-05-17 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in (LC_ALL, LANG): Save these values and restore them\r
- during execute mode. From Pavel Kankovsky.\r
- (mode): Accept strace and truss as programs that throw us into\r
- execute mode. From Pavel Kankovsky.\r
-\r
-1998-05-07 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * ltconfig.in: Don't use .$versuffix or .$major. Instead, assume\r
- the variable will include any required prefix.\r
- * ltmain.in: If no -version-info option was used, produce empty\r
- version strings rather than 0.0.0. When making library symlinks,\r
- avoid making a symlink if the name would be the same.\r
-\r
-1998-04-27 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in (link): Support `unsupported' as a hardcode_action.\r
- Reported by Lars Hecking.\r
- (lib_linked): Do some sanity checking to make sure that we\r
- actually do link libtool libraries into the program to prevent the\r
- above problem from happening again.\r
-\r
-1998-04-20 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in: Maybe reexec under $SHELL, if $echo doesn't work.\r
- Reported by Lars Hecking.\r
-\r
-1998-04-19 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * Makefile.am (maintainer-rekey): New rule to force us to change\r
- Project-Version after we make a release. This keeps all version\r
- numbers in sync, rather than branching just before the release.\r
- (maintainer-release, maintainer-checkin): Use maintainer-rekey.\r
-\r
- * ltmain.in (finish): Notice when a finish command fails, so that\r
- we can add it to the list of recommendations.\r
-\r
-1998-04-17 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * libtool.m4 (AM_PROG_LIBTOOL): Append file descriptor 5 to\r
- config.log, so that configure doesn't clobber the messages that\r
- ltconfig put there. From David Taylor.\r
-\r
-1998-04-15 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in (archive_cmds): Try using `$CC -shared' when\r
- configuring for GCC under irix5 and irix6. From Wolfram Gloger.\r
- (ofile): Add `--output' flag to change the name of the generated\r
- libtool. Suggested by Wolfram Gloger.\r
-\r
-1998-04-14 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in: Remove all hardcoded references to ltmain.in in\r
- favour of $PACKAGE and $PROGRAM.\r
- (install): Compute the installation name for programs, in case we\r
- install a relinked file which has a different name. Reported by\r
- Pieter Schoenmakers.\r
-\r
- * ltconfig.in (echo): Try using the ksh(1) `print -r' builtin\r
- command, before reverting to printf(1).\r
-\r
- * Makefile.am (libtool): Use $(SHELL) when invoking ltconfig.\r
-\r
- * ltconfig.in (echo): Rewrite the test for a working echo so that\r
- we win on Solaris by avoiding printf(1), if possible.\r
-\r
-1998-04-13 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * libtool.m4 (AM_PROG_NM): Don't override NM in the environment.\r
-\r
-1998-04-13 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in: New `--config' flag to print out all configured\r
- variables.\r
-\r
- * libtool.m4: Pass ltconfig the undocumented --no-reexec flag,\r
- since we call it explicitly using CONFIG_SHELL.\r
-\r
- * ltconfig.in: Restart the script under a different shell if\r
- CONFIG_SHELL is not /bin/sh. This way, people can use Bash if\r
- they don't have a working echo program.\r
-\r
- * ltmain.in, ltconfig.in: Use $SHELL instead of /bin/sh when\r
- generating executable scripts.\r
-\r
- * libtoolize.in, ltconfig.in, ltmain.in: Implement the `--debug'\r
- flag to begin shell tracing.\r
-\r
- * ltconfig.in (archive_cmds): Don't use `gcc -shared', even if we\r
- have GNU ld. Reported by Robert S. Maier.\r
-\r
-1998-04-06 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in (pic_flag): Create more than just a null C file, so\r
- that the SunPRO 4.2 cc doesn't complain. From Bob Friesenhahn.\r
- (gnu_ld_acts_native): Delete this variable. There is just too\r
- much version skew to try to pretend GNU ld is the same as the\r
- system ld. Reported by Ian Lance Taylor.\r
- (hardcode_action): Don't bother relinking or aborting on systems\r
- that are too dynamic to have a consistent hardcode method.\r
- Reported by Doug Winterburn.\r
-\r
-1998-03-24 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * doc/libtool.texi: A little proofreading. From Albert\r
- Chin-A-Young.\r
-\r
-1998-03-23 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in: Treat HP-UX 11 just like HP-UX 10. From Jeff Law.\r
-\r
-1998-03-21 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in (reload_flag): Correct a tiny bug where `--silent'\r
- would still print out the reload flag. From Stephan Kulow.\r
-\r
-1998-03-20 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * libtool.m4: Use changequote to avoid problems with square\r
- bracket patterns.\r
-\r
-1998-03-20 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * Release 1.2.\r
-\r
-1998-03-18 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in: Rearrange some of the echos to make them more\r
- consistent.\r
-\r
-1998-03-14 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in: Break up an echo command that causes Solaris printf\r
- to dump core. Apparently the Solaris people hardcoded a 2110-byte\r
- buffer into their printf(1). Feh. From John Judge.\r
-\r
-1998-03-11 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in: Change the test for the PIC compiler flag so that\r
- we assume it doesn't work if there are any warning messages. This\r
- fixes a bug using old GCC's on HP-UX. Reported by Akim Demaille.\r
-\r
-1998-03-10 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>\r
-\r
- * Makefile.am ($(srcdir)/ltconfig): Remove bogus command to create\r
- a file ltconfig in the build directory.\r
-\r
-1998-03-09 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>\r
-\r
- * ltmain.in: Avoid unnecessary use of command substitution,\r
- replacing foo=`eval \\$echo \"$mumble\"` by eval foo=\"$mumble\".\r
-\r
- (link): Use ${1+"$@"} in wrapper scripts in order to pass\r
- arguments safely to a program.\r
-\r
- * ltconfig.in: Use -fpic instead of -fPIC if $host_cpu matches\r
- m68*.\r
-\r
-1998-03-08 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * Release 1.1.\r
-\r
- * ltmain.in: <sigh> I like `here documents' a lot, but apparently\r
- they are so badly handled by old and buggy /bin/sh's, that\r
- replacing `cat <<EOF ... EOF' by `$echo "..."' improves libtool's\r
- speed by a factor of 5. So, I've eliminated here docs from the\r
- all-important ltmain.in. From Tom Lane.\r
-\r
-1998-03-07 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in: Copy the contents of ltmain.sh into the generated\r
- libtool. This should more than halve the execution times on old\r
- or buggy /bin/sh systems, such as HP-UX 9 and SunOS 4.1.4. From\r
- Tom Lane.\r
-\r
-1998-03-05 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * libtool.m4 (AM_ENABLE_SHARED, AM_ENABLE_STATIC): Add support for\r
- the `default' package, so that people can control unnamed\r
- packages.\r
- (LD): Only add an ABI flag under IRIX 6.x, since IRIX 5.x doesn't\r
- support them. From Alexandre Oliva.\r
-\r
-1998-03-01 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in: Port to UnixWare 2.x. From Christopher Olsen.\r
-\r
-1998-02-25 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in (compile): For consistency, honour the `-static' flag\r
- during compilation.\r
-\r
-1998-02-23 Brendan Kehoe <brendan@cygnus.com>\r
-\r
- * libtool.m4 (AM_ENABLE_SHARED, AM_ENABLE_STATIC): For\r
- --enable-shared, heed the value of $PACKAGE from AM_INIT_AUTOMAKE\r
- if given as the argument for the library to be built shared.\r
-\r
-1998-02-20 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * libtool.m4, ltconfig.in (NM): Fix up a typo confusion between\r
- $ac_dir and $dir. Reported by Akim Demaille.\r
-\r
- * ltmain.in (link): Don't allow both `-version-info' and\r
- `-release'. Reported by Danny Backx.\r
-\r
-1998-02-18 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * Makefile.am (noinst_SCRIPTS): Remove lineno from distribution.\r
-\r
- * lineno: Remove from distribution, as it is no longer needed.\r
-\r
- * Makefile.am ($(srcdir)/ltconfig.in, $(srcdir)/ltmain.sh):\r
- Rewrite these rules not to use config.status or lineno. This\r
- makes things simpler, and reduces dependencies, so that the\r
- scripts are rebuilt and installed in srcdir only when necessary.\r
- Reported by Stephan Kulow.\r
-\r
-1998-02-16 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * libtool.m4, ltmain.in, ltconfig.in: Correctly identify absolute\r
- directory names on MS-DOS. Suggested by Bob Friesenhahn.\r
-\r
- * ltconfig.in, ltmain.in, libtool.m4: Change a bunch of `sed N!d'\r
- commands to `sed Nq', for efficiency.\r
-\r
- * ltmain.in: Only egrep the first few lines of files in order to\r
- determine if they were libtool-generated. This prevents egrep(1)\r
- from taking forever to look at a 10MB binary on Solaris. From\r
- Stephan Kulow.\r
-\r
-1998-02-11 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in (no_undefined_flag): Add a flag to declare under\r
- Solaris that the library should not have any undefined\r
- references. Suggested by Bob Friesenhahn.\r
-\r
- * ltmain.in (mkdir): Fix one more mkdir race. From H.J. Lu.\r
-\r
-1998-02-08 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in, ltmain.in (striplib, old_striplib): Ditto.\r
-\r
- * ltconfig.in (profile_flag_pattern): Get rid of dead code.\r
-\r
-1998-02-07 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * libtool.m4 (AM_ENABLE_SHARED, AM_ENABLE_STATIC): New macros to\r
- modify the `--enable-shared' and `--enable-static' defaults in the\r
- configure script. This works a lot better than the old\r
- `enable_shared' and `enable_static' variables did. Reported by\r
- Bob Friesenhahn.\r
-\r
-1998-02-07 Samuel Tardieu <sam@inf.enst.fr>\r
-\r
- * ltmain.in: Recognize .ada, .ads and .adb as known suffixes (they\r
- are used by GNAT, the GNU Ada compiler).\r
-\r
-1998-02-06 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in: Turn on IRIX shared libraries again!\r
-\r
- * libtool.m4 (LD): Use file(1) to discover which ABI we're using\r
- on IRIX, and propagate the correct linker flag. From Jim Wilson.\r
-\r
- * ltconfig.in, ltmain.in (Xsed): `arg=-n; echo "$arg" | sed ...'\r
- gives problems, because the `-n' is interpreted as an option to\r
- echo(1). So, use `echo "X$arg" | sed -e 's/^X//' ...' everywhere,\r
- via the $Xsed convenience variable. Suggested by H.J. Lu.\r
-\r
-1998-02-02 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in: Turn off IRIX shared library support until 32-bit\r
- and 64-bit ABI differences can be resolved.\r
-\r
-1998-01-28 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * libtool.m4 (LD): Reverse yesterday's change because `-old_ld'\r
- isn't accepted by GCC.\r
-\r
-1998-01-27 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in (soname_spec): Add in user-specified release numbers\r
- for every host system that supports an soname that differs from\r
- the linkname.\r
-\r
- * libtool.m4 (LD): Add `-old_ld' to the list of flags that need to\r
- be passed through on SGI. Reported by Chris Lee.\r
-\r
- * ltmain.in (release): Prepend a hyphen to the release number, and\r
- fix a typo because `-version-info' takes only 3 args. From\r
- H.J. Lu.\r
-\r
-1998-01-25 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in (library_names_spec): On Linux, use the\r
- user-specified release.\r
-\r
- * ltmain.in (link): Allow the user to specify a release number for\r
- the library using the `-release' flag. Suggested by H.J. Lu and\r
- Ian Lance Taylor.\r
-\r
-1998-01-19 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in (old_postuninstall_cmds): Reorder so that chmod\r
- happens after ranlib. From Markus F.X.J. Oberhumer.\r
-\r
- * ltmain.in (mode): Added `gcc*' and `*-gcc*' to the patterns that\r
- recognize compilers. From Pieter Schoenmakers.\r
- (link): Recognize `.a' files again. Suggested by Pieter\r
- Schoenmakers.\r
-\r
-1998-01-18 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in (compile): Recognize `.asm' extension, for use with\r
- the nasm assembler. From Markus F.X.J. Oberhumer.\r
-\r
-1998-01-12 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in (runpath_var): Use instead of\r
- `hardcode_runpath_var'.\r
-\r
-1998-01-11 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in (finish): Add a better --finish message. Suggested by\r
- Kenneth Albanowski.\r
-\r
- * ltconfig.in, ltmain.in: Fix a few typos.\r
-\r
-1998-01-03 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in (link): Quote the definition of $echo in the wrapper\r
- script.\r
-\r
- * ltconfig.in (export_dynamic_flag_spec): Use `--export-dynamic'\r
- instead of `-export-dynamic', which is not accepted by all GNU\r
- ld's. From Eiichi Takamori.\r
-\r
- * ltmain.in (install): Don't print silly `library stripping'\r
- warnings. Reported by François Pinard.\r
-\r
-1997-12-19 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltmain.in: Don't forget to quote the CDPATH substitution. From\r
- Tor Lillqvist.\r
-\r
-1997-12-18 Gordon Matzigkeit <gord@profitpress.com>\r
-\r
- * ltconfig.in, ltmain.in (CDPATH): Unset this environment variable\r
- so that HP-UX shells, at least, don't print out the directory name\r
- after a `cd' command. From Tor Lillqvist.\r
-\r
-1997-12-10 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * demo/Makefile.am (hardcode): Change a bunch of references to\r
- `$(LIBS)' to `-lm', since we no longer put -lm in LIBS.\r
-\r
- * demo/configure.in: Delete the test for libm, since it is\r
- standard on every system.\r
-\r
- * demo/Makefile.am (libhello_la_LDFLAGS): Change to include -lm,\r
- in accordance with new inter-library dependency code.\r
-\r
- * ltmain.in (dependency_libs): Added to help people link programs\r
- without having to explicitly specify inter-library dependencies.\r
-\r
- * ltconfig.in (COLLECT_NAMES): Oops... I forgot to apply the AIX 3\r
- restriction to the generated libtool script. Reported by Stefan\r
- Westerfeld.\r
-\r
-1997-12-05 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltconfig.in (thisdir): Quote $echo in the generated libtool\r
- script for HP-UX. From Markus F.X.J. Oberhumer.\r
-\r
- * ltmain.in (link): Recognize the `.s' suffix. From Markus\r
- F.X.J. Oberhumer.\r
-\r
- * ltconfig.in (link_static_flag): Don't quote ${wl} on HP-UX\r
- because link_static_flag is never evaled. From Eric Backus.\r
-\r
-1997-12-01 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * demo/Makefile.am (helldl_DEPENDENCIES): Add `libhello.la' to our\r
- dependencies so that parallel builds work correctly. From Jim\r
- Meyering.\r
-\r
- * Makefile.am ($(srcdir)/ltconfig, $(srcdir)/ltmain.sh): Rewrite\r
- these rules so that they are parallelizable. Reported by Jim\r
- Meyering.\r
-\r
- * ltconfig.in (ltecho): We need special handling to quote the\r
- `echo' variable itself. From Alexandre Oliva.\r
-\r
-1997-11-29 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltconfig.in (COLLECT_NAMES): Enable this workaround for a broken\r
- collect2 only on AIX 3. This avoids problems on other AIX\r
- versions. Reported by Stefan Westerfeld.\r
-\r
- * ltmain.in, ltconfig.in (finish_eval): Variable like finish_cmds,\r
- except it is a single command which is evaled, and not shown.\r
-\r
- * ltconfig.in: Port to AmigaOS. From Joop van de Wege.\r
-\r
- * ltmain.in (echo): Delete preamble to check for a working echo,\r
- since we just use the one included in the generated libtool.\r
-\r
- * ltconfig.in (echo): Include this definition in the generated\r
- libtool script.\r
-\r
-1997-11-28 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltconfig.in, libtool.m4 (NM): Add /usr/ccs/bin to the PATH\r
- before checking. From Kaveh R. Ghazi.\r
- (NM): Delete an extraneous egrep from ltconfig.\r
-\r
- * ltconfig.in (finish_cmds): Change back to using `ldconfig -n'.\r
- This makes Linux behave like other systems, which is more in line\r
- with what libtool needs.\r
-\r
-1997-11-27 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltmain.in: Change a whole bunch of `progname' variables to\r
- `modename'. This is for clarity, and to fix a tiny typo in finish\r
- mode.\r
-\r
- * libtool.spec (Name, Version): Ditto.\r
-\r
- * configure.in (AM_INIT_AUTOMAKE): Use PRCS to automatically generate\r
- the proper package name and version number.\r
-\r
- * ltconfig.in (gnu_ld_acts_native): Treat GNU ld like the native\r
- linker on SunOS 4.x. Suggested by Alexandre Oliva.\r
- (deplibs): Change the defaults all over, since most systems cannot\r
- handle inter-library dependencies.\r
-\r
- * libtool.m4, ltconfig.in (NM): Only look at the first line of the\r
- output from NM when determining whether it supports a command line\r
- option. This prevents false positives on OSes which ignore\r
- invalid flags, like HP-UX, which prints `nm: unknown option "B"\r
- ignored'. Reported by Kaveh R. Ghazi.\r
-\r
- * ltconfig.in (finish_cmds): On Linux, update ld.so.cache by\r
- removing the `-n' flag from ldconfig. Suggested by Kenneth\r
- Albanowski.\r
-\r
- * Makefile.am (maintainer-checkin, maintainer-release): New\r
- commands to reap the full benefit of using PRCS to maintain\r
- libtool version numbers.\r
-\r
- * ltconfig.in, ltmain.in (global_symbol_pipe): Explicitly cast all\r
- addresses to __ptr_t. This fixes a bug due to a strict IRIX\r
- compiler. Suggested by Kaveh R. Ghazi.\r
-\r
-1997-11-23 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltmain.in (echo): For aesthetics, avoid using `$echo' when\r
- `echo' will do *exactly* the same thing. This prevents ugly\r
- `printf %s\n timestamp > some.lo' commands from appearing in the\r
- libtool output.\r
- (link): Delete the `-allow-undefined' flag because it is now the\r
- default. Make `-no-undefined' in order for people to declare that\r
- a library is entirely self-contained. This prevents maintainers\r
- from accidentally creating shared libraries that won't work on\r
- AIX. Reported by Stefan Westerfeld and Danny Backx.\r
-\r
- * ltconfig.in (echo): Use an echo variable, just as in ltmain.in,\r
- because we need it for quoting substitutions. For most of the\r
- script, though, use the default echo, just like Autoconf does.\r
- Without this patch, character \001 ends up in global_symbol_pipe.\r
- Reported by Lars Hecking and Jürgen Fluk.\r
-\r
- * ltmain.in (echo): Set default to `echo=echo'. Ooops. That's\r
- what you get for testing obscure code paths and forgetting to\r
- revert to the original version. Reported by Danny Backx.\r
-\r
-1997-11-14 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltconfig.in (hardcode_libdir_flag_spec): Set to `-R' for FreeBSD\r
- 2.2. From Sean Kelly.\r
- (postuninstall_cmds, old_postuninstall_cmds): Commands to run\r
- after uninstall mode deletes the libraries. Suggested by Joop van\r
- de Wege.\r
- (export_dynamic_flag_spec): On HP-UX, add the `${wl}-E'\r
- export_dynamic_flag_spec. Reported by Matthias Hoelzer.\r
-\r
-1997-11-11 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltconfig.in, ltmain.in (sed_quote_subst): Oops. We forgot to\r
- quote backticks. Reported by Joop van de Wege.\r
-\r
-1997-11-09 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltconfig.in (symcode): On IRIX, don't extract undefined\r
- symbols. When a function is inlined by G++, references to it are\r
- still marked as undefined in the object file. This means that our\r
- symbol file causes undefined references, because there are\r
- actually no matching global symbols. Reported by Paul Kendall.\r
-\r
-1997-11-08 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltconfig.in: Don't forget to redirect the COLLECT_NAMES libtool\r
- script fragment to the generated libtool, rather than to stdout.\r
-\r
-1997-11-07 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * libtool.m4 (LD): Add a more sophisticated test to determine the\r
- ABI flag on IRIX 6. Suggested by Lars Hecking and Ian Lance\r
- Taylor.\r
-\r
- * ltconfig.in, ltmain.in (COLLECT_NAMES): Only export this\r
- variable if we are running under AIX. Otherwise, we tickle a g++\r
- bug under IRIX. From Paul Kendall.\r
-\r
- * Change bug reporting address to <bug-libtool@gnu.org>.\r
-\r
- * ltconfig.in (allow_undefined_flag): OSF/1 3.x also requires a\r
- wildcard argument to `-expect_unresolved'. From Stephan Kulow.\r
-\r
-1997-11-06 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltmain.in (link): Use libname_spec.\r
-\r
- * ltconfig.in (pic_flag): Somehow, the HP-UX pic_flag (`+Z') was\r
- dropped between libtool-1.0 and now. Add it back in. Reported by\r
- Akim Demaille.\r
- Integrated more patches for OS/2. From Jeff Freedman.\r
- (libname_spec): New variable for OSes that don't require their\r
- libraries to look like `libNAME.a'.\r
-\r
- * ltmain.in (link): Only use global_symbol_pipe if it has been\r
- defined. From Stephan Kulow.\r
-\r
- * ltconfig.in (global_symbol_pipe): Protect C fragment under C++\r
- compilers. From Stephan Kulow.\r
-\r
- * Makefile.am ($(srcdir)/acinclude.m4,\r
- $(srcdir)/demo/acinclude.m4): Change rules to use LN_S so that\r
- they can be run on any system.\r
-\r
- * ltconfig.in (archive_cmds): For NetBSD, don't include deplibs.\r
- From Dieter Baron.\r
-\r
- * ltmain.in (mkdir): Check that the directory doesn't exist before\r
- we exit with error, so that we don't get races during parallel\r
- builds. From H.J. Lu.\r
- (fbsd_hideous_sh_bug): Apparently, some FreeBSD /bin/sh's have a\r
- bug that will empty base_compile unless we do this dummy\r
- assignment. From Marc van Kempen.\r
-\r
-1997-10-22 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * libtool.m4 (libtool_shared, libtool_static): Fixed logic error\r
- to reenable override of libtool's defaults by setting\r
- enable_shared or enable_static in configure.in. Reported by Tom\r
- Tromey and Stephan Kulow.\r
-\r
- * ltmain.in (link): Add explicit support for compiler options that\r
- begin with `+'. Reported by Aubert Pierre.\r
-\r
-1997-10-20 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltmain.in: Silly me. Change a bunch of occurances of "* $dir *"\r
- into *" $dir "*.\r
-\r
- * ltconfig.in (pic_flag): PIC is the default for AIX. From Mark\r
- Kettenis. It is also the default for OSF/1.\r
-\r
- * demo/Makefile.am (objdir): Quote double-quotes. From Mark\r
- Kettenis.\r
-\r
- * ltconfig.in (global_symbol_pipe): This variable is not\r
- double-evaled, so it should not be double quoted. From Mark\r
- Kettenis.\r
-\r
-1997-10-19 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltconfig.in (LD): Same as below.\r
-\r
- * libtool.m4 (LD): Set LD if we discover an absolute path to GNU\r
- ld. This prevents breakage when `$CC -print-prog-name=ld' returns\r
- an absolute directory name. Reported by Ulrich Drepper.\r
-\r
- * ltconfig.in: Port to OS/2 using EMX. From Jeff Freedman.\r
-\r
- * ltmain.in (link): Use old_archive_from_new_cmds.\r
-\r
- * ltconfig.in (old_archive_from_new_cmds): New variable to\r
- support DLL libraries.\r
-\r
- * ltmain.in (link): Only `eval' export_dynamic_flag_spec if it is\r
- not empty. Reported by Stephan Kulow.\r
-\r
-1997-10-18 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltconfig.in (objdir): Use the .libs directory on all systems for\r
- which that name is valid, and _libs on the others (like MS-DOS).\r
- Suggested by Juergen Erhard.\r
-\r
-1997-10-14 Gordon Matzigkeit <gord@gnu.org>\r
-\r
- * ltmain.in (link): Added a bit more inter-language support to the\r
- symbol file generation process.\r
- Instead of complaining about unrecognized argument suffices, pass\r
- them to the linker. This prevents libtool from barfing on\r
- mandatory arguments to linker flags. Reported by Michael\r
- Tiemann.\r
-\r
-1997-10-09 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.in (link): Change the wrapper script to follow symlinks\r
- in order to find thisdir. This should put the final nail in the\r
- coffin for problems with wrapper scripts. From Ian Lance Taylor.\r
-\r
-1997-10-07 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.in: Change a few `$echo' commands into `$show' to make\r
- --silent mode behave as advertised.\r
-\r
- * ltconfig.in (allow_undefined_flag): On OSF/1 4.x, use\r
- `-expect_unresolved \*'. From Christian Mondrup.\r
-\r
- * ltmain.in (install): Change install mode to allow a specified\r
- /bin/sh argument at the beginning of the install_prog. Also,\r
- specify the shell to run when invoking libtool recursively for\r
- finish mode. From Chris Provenzano.\r
-\r
- * libtool.m4 (LIBTOOL): Change definition to include $(SHELL).\r
- From Chris Provenzano.\r
-\r
- * ltconfig.in: Port to UTS 4.x. From Alistair Crooks.\r
-\r
- * demo/Makefile.am (hc-libflag): Add rules to make this binary for\r
- hardcode.test.\r
-\r
-1997-09-24 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in (LD): As with libtool.m4, don't override LD.\r
- Do a whole bunch of ac_t quoting.\r
-\r
-1997-09-24 Ian Lance Taylor <ian@cygnus.com>\r
-\r
- * libtool.m4 (AM_PROG_LD): Don't override LD in the environment.\r
-\r
-1997-09-21 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * libtool.m4, ltconfig.in (NM): Arguments to the for loop must be\r
- whitespace separated. This fixes a bug under FreeBSD's /bin/sh.\r
- From George Scott.\r
-\r
-1997-09-20 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.in (deplibs): When building shared libraries, always add\r
- -lc to deplibs. Reported by Andreas Jellinghaus.\r
-\r
-1997-09-15 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in, ltmain.in (COLLECT_NAMES): If the COLLECT_NAMES\r
- environment variable has not been set, set it to empty. This\r
- apparently fixes the AIX bug with GCC's collect2. Reported by\r
- Mark Kettenis.\r
-\r
- * demo/Makefile.am, ltmain.in, tests/hardcode.test (objdir):\r
- Changed objdir variable .libs to _libs. This is another MS-DOS\r
- portability fix. Suggested by Robert Hoehne.\r
-\r
-1997-09-13 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in, ltmain.in (hardcode_minusL): Fix typo by renaming\r
- hardcode_minusL to hardcode_minus_L. Also add FreeBSD\r
- hardcode_libdir_flag_spec. From Paul Traina.\r
-\r
- * ltmain.in (link): Honour multiple `-rpath' flags when linking\r
- programs. Suggested by Bengt Martensson.\r
- Quote appearances of $echo in the wrapper script. From Alexandre\r
- Oliva.\r
-\r
- * Makefile.am, configure.in, tests/tlibtool: Use ltmain.in instead\r
- of ltmain.sh.in.\r
-\r
- * ltmain.in: Rename ltmain.sh.in to ltmain.in. This fixes a\r
- portability problem (on MS-DOS, of all places!). From Robert\r
- Hoehne.\r
-\r
-1997-09-11 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Do not transform libtool objects to regular\r
- objects if we did not build old libs. Reported by Tomas Hiller.\r
-\r
-1997-09-05 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * demo/Makefile.am (hell_debug_LDFLAGS): Change hell.static to\r
- hell.debug in order to reflect the new static linking semantics.\r
-\r
- * ltmain.sh.in (link): Add new `-all-static' flag to prevent all\r
- dynamic linking. The old `-static' flag just prevents dynamic\r
- linking against libtool libraries. Suggested by Bengt\r
- Martensson.\r
-\r
- * ltconfig.in (with_gnu_ld): Add a test to make sure that we are\r
- actually using GNU ld. This fixes an inconsistency when running\r
- ltconfig without using libtool.m4. Reported by Ulrich Drepper.\r
- (global_symbol_pipe): Delete symbols that are not valid C\r
- identifiers. Reported by Johan Danielsson and Bengt Martensson.\r
-\r
-1997-09-04 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (echo): Quote all the uses of `echo' in all eval\r
- statements. Reported by Bengt Martensson and Alexandre Oliva.\r
- (echo): Need to surround test args with double quotes, or the echo\r
- test fails on Digital Unix 4.0. From Todd Kover.\r
-\r
-1997-08-28 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (echo): Change test to one that uses printf.\r
- This works on AIX, which has the same problems that Solaris does,\r
- but no working echo program.\r
-\r
-1997-08-27 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Make sure that compile_command and\r
- finalize_command are always evaled. Quote any unknown linker\r
- flags we need to pass through.\r
- (compile): Use quoting for flags we pass.\r
- (echo): I hate Sun! The /usr/bin/echo on Solaris handles\r
- backslash sequences, which makes it impossible to do backslash\r
- quoting using echo and sed. So, we search for an echo that obeys\r
- the `echo '\t'` = '\t' equality. Then we use `$echo' everywhere\r
- in ltmain.sh.\r
- Put tabs back into the ${IFS= } sequences. Emacs untabify is\r
- libtool bane.\r
-\r
- * ltconfig.in: Quote all variable values that may contain\r
- metacharacters creating the libtool script. This provides\r
- complete protection, so that even single-quotes may appear inside\r
- a libtool variable value.\r
-\r
- * ltmain.sh.in (link): Quote finalize_command before putting it in\r
- the wrapper script.\r
-\r
-1997-08-26 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (sed_quote_subst): Change the quoting procedure\r
- again. I think that the new one is robust for *all* characters,\r
- including whitespace and metacharacters.\r
-\r
-1997-08-25 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in: Change quoting procedure because some shells\r
- cannot handle `]' in scan sets. From Ian Dall.\r
-\r
-1997-08-22 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (execute): Added -dlopen flag handling. Suggested\r
- by Alexandre Oliva.\r
-\r
-1997-08-21 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Change executable wrapper to fix up value\r
- of thisdir, as well as progdir, if the $0 path doesn't work. This\r
- guarantees that shlibpath_var is set correctly. Add support for\r
- execute mode.\r
-\r
- * ltmain.sh.in (execute): New mode to automatically set\r
- shlibpath_var, which allows easy debugging of uninstalled\r
- executables and libraries. Suggested by Kenneth Albanowski.\r
-\r
-1997-08-20 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * Makefile.am ($(srcdir)/ltconfig): Use lineno.\r
-\r
- * configure.in: Add AM_PROG_AWK for lineno.\r
-\r
- * lineno: New program to automatically put line numbers in\r
- ltconfig.\r
-\r
- * libtool.m4, ltconfig.in (AM_PROG_LD): Yet Another Rewrite, which\r
- incorporates the results of `gcc -print-program-name=ld'.\r
- Suggested by Alexandre Oliva.\r
-\r
-1997-08-14 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in: Accept `--quiet' and `--silent' flags to turn off\r
- command echoing. From Juergen A. Erhard.\r
-\r
- (compile): Recognize the Objective C `.m' extension. From Juergen\r
- A. Erhard.\r
-\r
- (compile): Suppress error output from the second compilation (if\r
- any) so that we don't get those frustrating duplicate error\r
- messages.\r
-\r
-1997-08-12 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Added messages to config.log to describe what sort\r
- of test we are running.\r
- (pic_flag): Added a sanity check for pic_flag. This should fix\r
- bugs reported using the cc bundled with HP-UX 10. Suggested by\r
- Bruno Haible and Akim Demaille.\r
-\r
-1997-08-01 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Add -dlopen and -dlpreopen support for\r
- libtool objects. This means that dlopened modules no longer need\r
- to be shared libraries.\r
-\r
- * ltconfig.in (pic_flag): GCC on IRIX 6 always builds PIC.\r
- Reported by Ian Lance Taylor.\r
-\r
- * libtool.m4 (LD): Always add `-n32' to the linker if we are using\r
- GCC on IRIX 6. Reported by Ian Lance Taylor.\r
-\r
-1997-07-30 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * libtool.m4 (AM_PROG_LIBTOOL): Explicitly check enable_shared and\r
- enable_static rather than just enableval. This allows\r
- configure.in scripts to set their own defaults. Suggested by\r
- Tommy Reilly.\r
-\r
-1997-07-29 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in: Add NLS environment variable handling copied from\r
- ltconfig.in. Reported by Akim Demaille.\r
- (link): If allow_undefined_flag is not supported, then turn on old\r
- libraries. Reported by Akim Demaille.\r
-\r
- * demo/dlmain.c (main): Use dld_preloaded_symbol_count to display\r
- a message about the sortedness of the symbol table.\r
-\r
- * ltconfig.in (nlist): Use an nlist convenience variable, so that\r
- code can be shared directly with ltmain.sh.in.\r
-\r
- * ltconfig.in, ltmain.sh.in (dld_preloaded_symbol_count): Count up\r
- the number of symbols in the dld_preloaded_symbols. Set to `-1'\r
- if the list wasn't both sorted and counted. This allows\r
- applications to do a quick binary search, if they are so inclined.\r
-\r
-1997-07-25 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Remove code for `-version-file', since it\r
- has been long-deprecated.\r
-\r
- Disable static linking if hardcode_direct is unsupported and there\r
- is no working link_static_flag. This provides correct behaviour\r
- for all cases on AIX 3, regardless of whether collect2 is broken\r
- or not. Reported by Mark Kettenis.\r
-\r
- * ltconfig.in: Fix typo in test polarity. From Mark Kettenis.\r
-\r
-1997-07-24 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in (hardcode_direct): Set to `unsupported' if aix3 uses\r
- a broken collect2. Adapted out of test results from Mark\r
- Kettenis.\r
- (link_static_flag): Make sure the link_static_flag actually works\r
- with a trivial binary.\r
-\r
- * ltmain.sh.in, ltconfig.in (export_dynamic_flag_spec): Renamed\r
- from export_dynamic_flag because we eval it in ltmain.sh.\r
-\r
- * ltmain.sh.in (link_static): Don't eval link_static_flag.\r
-\r
- * demo/dlmain.c (main): Change function prototype to be KNR\r
- compatible. From Kaveh R. Ghazi.\r
-\r
- * ltmain.sh.in (link): Use no_builtin_flag. This works around\r
- conflicting definitions of builtin functions with at least GCC.\r
- Reported by Kazuhiro Sasayama.\r
-\r
- * ltconfig.in (no_builtin_flag): New flag to turn off builtin\r
- functions when compiling an object file.\r
- (pipe_works): Use it.\r
-\r
-1997-07-23 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in (pic_flag): According to the libg++ 2.7.2 configure\r
- script, DEC alpha CPUs are PIC-only, as well. Reported by Kevin\r
- Jacobs.\r
-\r
-1997-07-21 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in, ltmain.sh.in: Replace all occurances of "sed 'X;\r
- Y'" with "sed -e 'X' -e 'Y'".\r
-\r
- * ltmain.sh.in (link): Finish full integration for `-dlopen' and\r
- `-dlpreopen'.\r
-\r
- Fix two silly typos where I used a compile_command in place of a\r
- finalize_command, and vice versa.\r
-\r
- Change the wrapper script to check a hardcoded path only if the\r
- argv[0] method fails. This is a compromise for the previous two\r
- patches, and should solve the majority of problems with wrapper\r
- scripts. From Kenneth Albanowski.\r
-\r
- (link): Change a reference to hardcode_libdir_colon_separated to\r
- use the new hardcode_libdir_separator variable.\r
-\r
- * demo/Makefile.am (helldl_LDFLAGS): Add `-export-dynamic' and\r
- `-dlpreopen' for building helldl.\r
-\r
- * demo/dlmain.c (main): Succeed, even if none of the libhello\r
- symbols have been preloaded.\r
-\r
-1997-07-20 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in (global_symbol_pipe): Add `U' to the accepted global\r
- symbol types. This means that we will get duplicate symbols, but\r
- we'll also be sure to get all global symbols used by the program.\r
-\r
- * ltconfig.in (pipe_works), ltmain.sh.in (link): Sort and make\r
- symbol output unique.\r
-\r
-1997-07-19 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in (pipe_works): Check to make sure our guessed\r
- global_symbol_pipe actually works.\r
-\r
- * ltmain.sh.in (link): Revert change from Kenneth Albanowski. The\r
- wrapper scripts are more reliable when they just use the argv[0]\r
- value. Generally, when the argv[0] method doesn't work, the user\r
- is trying to do something weird with an uninstalled binary, and\r
- should try a different approach.\r
-\r
- * ltconfig.in, ltmain.sh.in (CC): Always use `$CC' instead of\r
- `$cc'. This fixes a FreeBSD bug. Reported by Chuck Robey, and\r
- others.\r
-\r
-1997-07-14 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): In wrapper scripts, hardcode the current\r
- directory to prevent phony argv[0] values from screwing up our\r
- program. From Kenneth Albanowski.\r
-\r
-1997-07-13 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * Makefile.am (demo_distfiles): Add demo/dlmain.c to the\r
- distribution.\r
-\r
-1997-07-12 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * demo/Makefile.am: Add helldl, made from dlmain.c, to demostrate\r
- `-dlopen' usage.\r
-\r
- * demo/dlmain.c: New file to demonstrate preloaded modules.\r
-\r
- * ltmain.sh.in (link): Add `-dlopen' flag to preload dynamic\r
- modules, even on static platforms. Use `$NM' and\r
- `$global_symbol_cmd' to extract symbols from required files.\r
- (dlname): Delete dlname mode entirely. It is rendered obsolete\r
- because the `.la' file format is now a public interface.\r
-\r
- * ltconfig.in (NM): New variable for BSD-compatible nm program.\r
- (global_symbol_cmd): Pipeline to extract global symbols from the\r
- nm output.\r
-\r
- * ltmain.sh.in: The .la file header should depend on `ltmain.sh',\r
- not `$PROGRAM'.\r
- (link): Make sure $export_dynamic_flag is eval'ed before it is\r
- used.\r
-\r
-1997-07-11 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * libtool.spec: New Red Hat Package Manager specification file in\r
- order to help people prepare distributions of libtool for Linux.\r
-\r
- * ltmain.sh.in: Eliminate two accidental uses of the NONE magic\r
- value. These were breaking libtool's behaviour when no mode is\r
- specified.\r
-\r
-1997-07-08 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * Release 1.0.\r
-\r
- * ltconfig.in: On SunOS, append /usr/etc to the PATH before\r
- running ldconfig; on *BSD, append /sbin. This was done in line\r
- with the Linux change suggested by Kenneth Albanowski.\r
-\r
- * demo/Makefile.am (hardcode_tests): Aesthetic change to\r
- alphabetize order of compiling the hardcode tests.\r
-\r
- * Makefile.am (EXTRA_DIST): Delete README-automake.\r
-\r
- * README-automake: Remove from distribution.\r
-\r
-1997-07-02 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): In the executable wrapper, strip trailing\r
- colons from the shlibpath_var because some ld.so's, notably\r
- OpenBSD 2.0's (!), don't parse colon-terminated values correctly.\r
- From Tim Pierce.\r
-\r
-1997-07-01 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in, ltconfig.in: Eliminate uses of the NONE magic\r
- variable value. Use an empty variable instead.\r
-\r
- * ltconfig.in (with_gcc, with_gnu_ld): Do the tests for the C\r
- compiler and linker if the variables are unset, or if they are not\r
- GNU C and ld.\r
- (RANLIB): Eliminate redundant `if' statement.\r
-\r
- * configure.in: Use AM_PROG_LD.\r
-\r
- * libtool.m4 (AM_PROG_LD_GNU): New macro to determine if LD is GNU\r
- ld.\r
- (AM_PROG_LD): Rename AM_PATH_PROG_LD to AM_PROG_LD. Parameterize\r
- so that the user can specify `--with-gnu-ld' or `--without-gnu-ld'\r
- to indicate his preference.\r
- (AM_PROG_LIBTOOL): Use it.\r
-\r
-1997-06-30 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Append /sbin to the path before running ldconfig on\r
- Linux. This helps superusers who haven't set their PATH\r
- correctly. Suggested by Kenneth Albanowski.\r
-\r
-1997-06-29 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in: Change all the `eval "$run ..."' sequences to\r
- `$run "eval ..."'.\r
-\r
- Change all `$ln_s ...' sequences to use `(cd /dir && $LN_S ...)'.\r
- This is the sequence recommended by the Autoconf manual, and\r
- should avoid any problems on older machines. Eliminate all uses\r
- of `cp -p'. Reported by Akim Demaille.\r
-\r
- (install): Use `test $# -gt 0' instead of `test -n "$1"'.\r
-\r
- * ltconfig.in (LN_S): Add test to see if `ln -s' works.\r
-\r
- * libtool.m4: Increment serial number, and require AC_PROG_LN_S.\r
-\r
-1997-06-26 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Add missing `test' statement. Reported by\r
- Akim Demaille.\r
-\r
-1997-06-24 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * libtool.m4 (LD): Consistently use ac_cv_path_ld instead of\r
- am_cv_path_ld. From Tim Pierce.\r
-\r
-1997-06-20 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in: Redo two robustness fixes. Alexandre had the\r
- correct approach, but I botched them.\r
-\r
- * ltconfig.in (dynamic_linker): Disable shared libraries on\r
- MkLinux unless GNU libc is in use. Reported by Akim Demaille.\r
-\r
-1997-06-19 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (install): Add a missing `test' command. Reported\r
- by Joel Weber.\r
- Miscellaneous fixes to improve robustness. From Alexandre Oliva.\r
-\r
-1997-06-14 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Create invalid libtool objects when partial\r
- linking if we don't have PIC. From Jeff Dairiki.\r
- (install): Fix bug if libtool object is installed to a file name\r
- without directory components. From Jeff Dairiki.\r
-\r
-1997-06-13 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * Makefile.am (demo/configure): Fix up rules to run autoconf.\r
- (aclocal.m4): Now we depend on our own libtool.m4.\r
-\r
- * configure.in (AM_PATH_PROG_LD): Use it.\r
-\r
- * libtool.m4 (AM_PATH_PROG_LD): New macro to find the linker used\r
- by the C compiler.\r
- (AM_PROG_LIBTOOL): Use it.\r
-\r
- * ltmain.sh.in (install, uninstall): Support installing and\r
- uninstalling `.lo' files. From Jeff Dairiki.\r
-\r
-1997-06-11 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * Makefile.am (ltconfig, ltmain.sh): Only move if $(srcdir) is not\r
- the current directory. Don't regenerate every time the package is\r
- reconfigured. Reported by Tom Tromey.\r
- (MAINTAINERCLEANFILES): Added ltconfig, ltmain.sh, so that\r
- $(srcdir) is not messed with during a regular clean.\r
-\r
-1997-06-10 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * Makefile.am (ltconfig, ltmain.sh): Be sure to move these files\r
- into $(srcdir) once they are created.\r
-\r
- * ltmain.sh.in (link): Disable building static libraries.\r
- People should use their favourite AR and RANLIB commands.\r
- Disable building old-style objects if `--disable-static' is\r
- given. Suggested by Tom Lees and Stephan Kulow.\r
-\r
-1997-06-08 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in (host_cpu, host_vendor, host_os): Patch up\r
- definitions, to allow for the fact that the host_os may contain\r
- hyphens (as in linux-gnu). From Scott Goehring.\r
-\r
- * ltmain.sh.in (link): Move the `dlname' setting closer to the top\r
- of the file. Suggested by David Mosberger-Tang.\r
- Symlink the libtool archive into the `.libs' directory so that it\r
- can be found by programs that want to find a library's dlname by\r
- searching LD_LIBRARY_PATH. Reported by David Mosberger-Tang.\r
-\r
-1997-06-06 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * Tell people to report bugs to the new libtool mailing list,\r
- <bug-libtool@gnu.ai.mit.edu>.\r
-\r
-1997-06-05 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in (allow_undefined_flag): New variable that implements\r
- `-allow-undefined'.\r
- (archive_cmds): Enable C++ constructors for FreeBSD 2.2. From\r
- David Nugent.\r
-\r
- * ltmain.sh.in (link): Accept new `-allow-undefined' flag when\r
- building libtool libraries. This tells libtool to allow\r
- unresolved symbols to exist in shared libraries. Basically, this\r
- turns off shared libraries on AIX. Suggested by Ian Lance Taylor.\r
-\r
-1997-05-26 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * libtool.m4 (LD): On at least IRIX, many different flags need to\r
- be propagated to the linker if they are part of the compiler\r
- command line. Reported by Anthony Green.\r
-\r
-1997-05-10 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Trivial port to FreeBSD 3. From David Nugent.\r
-\r
-1997-04-25 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Remove all traces of `-whole-archive',\r
- `-no-whole-archive', and libtool convenience libraries. They were\r
- more trouble than they're worth. If these are ever reimplemented,\r
- they need more careful attention to make portable.\r
-\r
- * libtool.m4, ltconfig.in: Added a `--disable-static' flag to turn\r
- off static library creation. From Tom Lees (who finally convinced\r
- me that it was the Right Thing to do).\r
-\r
-1997-04-22 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (hardcode_runpath_var, runpath_var): Use them, if\r
- the linker has no -rpath flag.\r
- Quote the values we use to set runpath_var and shlibpath_var.\r
- (link): Use libobjlibs for libtool convenience libraries.\r
-\r
- * ltconfig.in (hardcode_runpath_var, runpath_var): Add new\r
- variables to describe linkers that honour `LD_RUN_PATH'.\r
- (host_cpu, host_os): Use these more specific variables, rather\r
- than the full canonical host system name.\r
-\r
- * ltmain.sh.in (dlname): Distinguish between missing\r
- `-export-dynamic' and when the library is only statically linked.\r
-\r
-1997-04-21 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Trivial port to OpenBSD by making it an alias for\r
- NetBSD. From Tim Pierce.\r
-\r
-1997-04-16 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Temporary measures to check for a broken collect2\r
- program. Right now, we just see if we're using GCC on AIX 3.\r
-\r
-1997-04-13 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (mode): Use `egrep -e' when inferring the operation\r
- mode.\r
-\r
-1997-04-12 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in (linker): Some GNU ld's don't accept `--version',\r
- but do accept `-v'. From Jukka Honkela.\r
- (ld_shlibs): AIX lossage may be settling down. AIX 3.2.5 ld does\r
- *not* hardcode direct libraries, but AIX 4.1.[45] ld does.\r
-\r
-1997-04-07 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in (hardcode_action): Fix silly logic error. From\r
- Bruno Haible.\r
-\r
-1997-04-05 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (install): Relink if hardcode_action is `relink',\r
- rather than using complex conditionals based on the other\r
- hardcode variables.\r
-\r
- * ltconfig.in (hardcode_action): Set to `relink', not `immediate',\r
- if we can only hardcode existing directories. Rearrange\r
- conditionals to make the intent clearer, otherwise this can be one\r
- hellish piece of code for the already-dizzy libtool maintainer.\r
-\r
-1997-04-02 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * replfunc.m4: Delete from the distribution. Documentation now\r
- describes how to set LTALLOCA and LTLIBOBJS in your own\r
- configure.in.\r
-\r
- * ltmain.sh.in (link): Make sure a libtool library only counts as\r
- a shared library if its library_names are non-null.\r
- Use timestamps for .lo's when PIC is turned off, rather than\r
- symlinking to the real object. This helps invalid mixtures of PIC\r
- and non-PIC to fail.\r
-\r
-1997-04-01 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * Makefile.am (EXTRA_DIST): Distribute libtool.prj.\r
-\r
- * Shameless plug: Changed source code management system from CVS\r
- to PRCS.\r
-\r
- * libtool.scm: Initial Guile implementation of libtool.\r
-\r
- * ltmain.sh.in: An unexpected inconsistency in my whole approach\r
- to shared libraries has proven that libtool needs to be completely\r
- rewritten if I'm going to give full shared library support for\r
- platforms that don't use the GNU C library version 2 (which to my\r
- knowledge currently only works on GNU Hurd and Linux/GNU systems).\r
- Porting the GNU C library should not be difficult, though.\r
-\r
- Platforms that don't have the dlopen(3) family of functions will\r
- need to install GNU DLD version 4 in order to build any kind of\r
- libraries at all. Unfortunately, DLD 4 won't be released for a\r
- while, because I maintain it, and I'm too busy working on libtool.\r
-\r
- I'll keep the old ltconfig/ltmain.sh implementation around for as\r
- long as I can, and continue applying bug fixes, so that I'll have\r
- a reasonable starting point for this new libtool implementation.\r
-\r
- It looks like this implementation will be even more complex than\r
- the original (pre-0.7) libtool. Initial estimates show that it\r
- may be up to 3 times slower, and 5 times larger than libtool-0.9.\r
- I'll probably have to rewrite it in Guile to get reasonable\r
- performance, which will severely limit its portability for a\r
- while.\r
-\r
- That will also introduce a bootstrapping issue, since the next\r
- release of Guile will use libtool to build shared libraries. So,\r
- if users want to have shared Guile libraries, they will have to\r
- configure Guile with `--disable-shared', compile it, install it,\r
- then reconfigure Guile with `--enable-shared' and repeat.\r
-\r
- I was hoping to get libtool 1.0 out the door by early April, but\r
- now it looks like it will take at least another year before it'll\r
- be usable by the public at large. April fools. libtool.scm\r
- doesn't exist yet, either.\r
-\r
- * ltconfig.in (verify_host): Remove redundant `Transform *-*-linux*\r
- to *-*-linux-gnu*'. From Bruno Haible.\r
-\r
-1997-03-31 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * Makefile.am: Use the new AUTOMAKE and ACLOCAL variables.\r
-\r
- * ltmain.sh.in (link): Only fail if a convenience library doesn't\r
- exist, and the user specified -whole-archive.\r
- Fix shell quoting that was breaking @OUTPUT@ substitution.\r
-\r
-1997-03-28 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Use the hardcode_libdir_separator.\r
- Convenience libraries are libtool objects if we're not building\r
- libtool libs.\r
-\r
- * ltconfig.in (hardcode_libdir_separator): Added in case the\r
- linker only honours the last of the -rpath flags (but it can\r
- contain multiple colon-separated directories), such as on OSF/1.\r
- Reported by Carl D. Roth.\r
-\r
- * ltmain.sh.in (link): Set the dlname if -export-dynamic is given.\r
- (install, uninstall): Handle the dlname file separately.\r
-\r
- * ltconfig.in (export_dynamic_flag): Added to allow programs to\r
- use reflexive dlopens.\r
-\r
- * ltmain.sh.in: Include the mode name in any help messages.\r
- (dlname): New mode to give the name to be used with dlopen(3).\r
-\r
- * ltconfig.in (AR): Allow AR to be set by the user, and export it\r
- to ltmain.sh.\r
-\r
- * ltmain.sh.in: Remove broken profiled library support.\r
- Added `-whole-archive' and `-no-whole-archive' to manipulate\r
- convenience libraries.\r
-\r
-1997-03-27 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Allow the creation of static convenience\r
- libraries made of libtool objects. Suggested by David\r
- Mosberger-Tang.\r
-\r
-1997-03-25 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: On AIX, libtool also needs to look for `B' symbols\r
- in nm output. These are global variable definitions.\r
-\r
- * ltmain.sh.in: Linking with -static should link against the\r
- linklib if old_library is empty (like it is on AIX).\r
-\r
- * ltconfig.in: Change the order of OS detection, so that\r
- linux-gnu* is detected before gnu*.\r
-\r
- * Makefile.am (libtool): Use the correct CC, RANLIB, LD, when\r
- generating libtool. From Carl D. Roth.\r
-\r
- * configure.in: Find out the user-supplied CC, LD, RANLIB. From\r
- Carl D. Roth.\r
-\r
-1997-03-24 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in: Linking with -static should link against the old\r
- library, not linklib.\r
-\r
- * README-automake: Updated to point to Automake 1.1m.\r
-\r
-1997-03-15 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * demo/main.c: Use it.\r
-\r
- * demo/foo.h: Declare it.\r
-\r
- * demo/foo.c: Added definition of `nothing' so that we have an\r
- global variable definition, as well as functions.\r
-\r
-1997-03-12 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Make sure either enable_shared or enable_static is\r
- configured. Reported by Tom Tromey.\r
-\r
- * ltmain.sh.in: Bomb out if no library types are configured.\r
-\r
-1997-02-22 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in, ltmain.sh.in (hardcode_libdir_flag_spec): Renamed\r
- from `hardcode_libdir_flag'.\r
- (library_names_spec): Renamed from `lib_names'.\r
-\r
- * ltconfig.in, ltmain.sh.in (hardcode_action): Change value from\r
- `rpath' to `immediate'.\r
-\r
- * replfunc.m4: Add AM_FUNC_ALLOCA, AM_FUNC_MEMCMP, and\r
- AM_STRUCT_ST_BLOCKS.\r
-\r
-1997-02-18 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Transform *-*-linux* to *-*-linux-gnu* to support\r
- old-style config.guess scripts.\r
-\r
-1997-02-17 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in: Create objdir *before* linking a program into it.\r
-\r
-1997-02-12 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Any ld --version that returns GNU is probably a GNU\r
- ld. From Marcus Daniels.\r
-\r
- * libtool.m4: Added AM_REPLACE_FUNCS.\r
-\r
-1997-02-11 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Trivial port to *-*-osf4. From Bruno Haible.\r
-\r
-1997-02-10 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: AIX 3 and 4 ld only hardcodes LIBPATH if -L is not\r
- specified. This behaviour is the same with both xlc and gcc.\r
-\r
-1997-02-07 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * doc/platforms.texi: Yaay! We found a workaround for HP-UX\r
- /bin/sh buffer overflows. From Eric Backus.\r
-\r
-1997-02-03 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * Release 0.9.\r
-\r
- * PLATFORMS, doc/platforms.texi, Makefile.am, doc/Makefile.am:\r
- Move PLATFORMS to doc/platforms.texi.\r
-\r
- * ltmain.sh.in (link): Use hardcode_libdir_flag to get a library\r
- directory into the resulting binary.\r
- Use hardcode_action, and make many simplifying changes to have\r
- compilation and finalization be consistent with each other.\r
-\r
- * ltconfig.in: Not so amazing! It's AIX cc that hardcodes direct\r
- libraries... gcc doesn't, though.\r
- (link_rpath_flag): Change link_rpath_flag to be\r
- hardcode_libdir_flag.\r
- (hardcode_action): New variable to simplify ltmain.sh.\r
-\r
-1997-01-29 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in: Change to take advantage of linkers that don't\r
- hardcode direct libraries.\r
-\r
- * ltconfig.in: Amazing! AIX 3 linker doesn't hardcode direct\r
- libraries, which makes it less buggy than AIX 4. Reported by Mark\r
- Kettenis.\r
-\r
- * demo/configure.in: Check for the math library.\r
-\r
- * demo/foo.c (foo): Change to use the `cos' function, so that we\r
- need to link against another library.\r
-\r
-1997-01-28 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Export the PATH variable in order to find\r
- the program, rather than giving a full path. This helps give the\r
- program a less confusing value for argv[0].\r
-\r
-1997-01-26 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * Release 0.8.\r
-\r
-1997-01-24 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * Makefile.am (demo_distfiles): Add demo/acinclude.m4 to the\r
- distribution.\r
-\r
-1997-01-22 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * libtool.m4: For IRIX 6, ld needs -n32 if cc uses it. Reported\r
- by Bruno Haible.\r
-\r
- * ltconfig.in: IRIX ld does not hardcode direct libraries.\r
- Reported by Bruno Haible.\r
-\r
-1997-01-18 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in, ltmain.sh.in (hardcode_shlibpath_var): Allow new\r
- value, `unsupported', since most linkers do not allow you to use\r
- shlibpath_var for initial linking.\r
-\r
- * ltconfig.in: Lots of bug fixes from Bruno Haible. Set wl on\r
- OSF/1, fix definitions of hardcode_* variables.\r
- (archive_cmds): Fix not to use +h on HP-UX 9.x. Reported by Bruno\r
- Haible.\r
-\r
-1997-01-17 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * libtoolize.in: Handle explicit AC_CONFIG_AUX_DIR settings.\r
- Suggested by Akim Demaille.\r
-\r
- * libtool.m4: Change ltconfig line to use $CONFIG_SHELL when it is\r
- specified. Reported by Bruno Haible.\r
-\r
-1997-01-16 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * demo/Makefile.am (hc-direct): Do better searching for the proper\r
- name to do a direct link.\r
- (hc-libpath): Make allowances if shlibpath_var cannot be used\r
- to find libraries at link time, such as on AIX.\r
-\r
- * Makefile.am (demo_distfiles): Remove ansi2knr.1 and ansi2knr.c.\r
-\r
- * demo/foo.c, demo/hello.c, demo/main.c: Change ANSI prototypes to\r
- KNR form, for better portability, and less ansi2knr hair.\r
-\r
- * demo/configure.in: Remove AM_FUNC_PROTOTYPES.\r
-\r
- * demo/Makefile.am: Remove ansi2knr from the AUTOMAKE_OPTIONS.\r
-\r
- * demo/ansi2knr.1, demo/ansi2knr.c: Removed these files.\r
-\r
- * ltmain.sh.in: Use 1>&2 consistently to direct errors and\r
- warnings to stderr.\r
- (compile): Fix missing single quote.\r
-\r
- * ltconfig.in (hardcode_direct): On Solaris at least, using\r
- DIR/libNAME.so does not hardcode DIR, so introduce a new hardcode\r
- variable to reflect that.\r
-\r
- * ltmain.sh.in (link): If linking with $link_static_flag fails,\r
- then retry without it, but still use the .a versions of\r
- uninstalled libtool archives.\r
-\r
-1997-01-15 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Eval $link_static_flag. Reported by Bruno\r
- Haible.\r
-\r
- * PLATFORMS: Add to distribution. Suggested by Bruno Haible.\r
-\r
-1997-01-13 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Add support for SCO OpenServer 5.x. From\r
- Christopher Olsen.\r
-\r
- (can_build_shared): Initialize at the top of the file, so that\r
- shared libraries aren't built on platforms that don't support\r
- them.\r
-\r
-1997-01-11 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in, ltconfig.in, libtoolize.in, doc/libtool.texi:\r
- Update the copyright completion years.\r
-\r
-1997-01-08 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Port to IRIX 5.3, 6.2.\r
-\r
-1997-01-06 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: HP-UX 9 support is the same as HP-UX 10, so the\r
- port is trivial.\r
-\r
- * libtoolize.in: Add --dry-run option, -n for short.\r
-\r
-1997-01-03 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): On at least SunOS, /bin/sh doesn't\r
- understand "export something=val". From Bruno Haible.\r
-\r
-1997-01-02 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (compile): Recognize valid source file suffixes for\r
- Fortran and C++.\r
-\r
-1996-12-17 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Don't allow *._o and *.l_o to be valid\r
- object type suffixes, in spite of Automake's current ansi2knr\r
- implementation. Not all compilers allow non-`.o' suffixes.\r
-\r
-1996-12-16 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Delete the `libtool' version type.\r
-\r
-1996-12-12 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Use the full autoconf syntax when checking for GNU\r
- C. Delete library stripping program, until we have a correct\r
- test.\r
-\r
-1996-12-11 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: On AIX 3, use /usr/ucb/nm, not /ucb/nm. From Mark\r
- Kettenis.\r
-\r
-1996-12-09 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- Reported by Charles Kerr:\r
- * doc/libtool.texi (Creating Object Files): Doc fix independant ->\r
- independent.\r
-\r
- * ltconfig.in (ld_shlibs): SunOS 4 doesn't support shared library\r
- dependencies.\r
-\r
-1996-12-08 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * Release 0.7.\r
-\r
- * Makefile.am (EXTRA_DIST): Add README-automake to the\r
- distribution.\r
-\r
- * ltmain.sh.in (link): When linking libtool libraries, use\r
- standard objects if they are PIC. This prevents spurious warnings\r
- about invalid suffixes on AIX.\r
-\r
- * demo/Makefile.am: Rename libhell to libhello, so that we're not\r
- quite as offensive.\r
-\r
- * ltconfig.in: Remove unnecessary host validity checking.\r
-\r
- * ltmain.sh.in: Don't force people to use libNAME.la: SOMETHING.la\r
- is good enough (for consistency with *.a handling).\r
-\r
-1996-12-07 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Accept files ending in .a as standard\r
- object files. Reported by Ulrich Drepper.\r
- Remove support for creating profiled libraries (for now).\r
- Transform all library objects into standard objects when linking a\r
- program.\r
-\r
- * ltconfig.in (thisdir): How embarrassing! An error in the regexp\r
- for finding the directory component of the script path.\r
-\r
-1996-12-05 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (compile): Support `.S' (preprocessed assembler)\r
- files. Reported by Anthony Green.\r
-\r
- * libtoolize.in: Give clearer instrutions for how to update\r
- aclocal.m4.\r
-\r
- * ltconfig.in, ltmain.sh.in (link): Add support for creating\r
- reloadable objects.\r
-\r
-1996-12-04 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (install): Fix passing -n flag to `libtool\r
- --finish'.\r
- (compile): Compile `.lo' and `.o' objects at the same time so that\r
- non-PIC objects (if they are available) can be used for linking\r
- into programs and creating static archives. Suggested by Ulrich\r
- Drepper.\r
-\r
-1996-12-03 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (link): Give the full path to the libtool library\r
- when sourcing it.\r
-\r
- * ltconfig.in (old_striplib): Do a configuration test to determine\r
- if old-style libraries actually can be stripped or not.\r
-\r
-1996-12-02 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Delete reference to ABOUT-LIBS.\r
-\r
- * tests: Added new subdirectory.\r
-\r
- * doc/libtool.texi: Doc fixes, and finished up the Configuring\r
- chapter.\r
-\r
- * ltmain.sh.in (link): Allow *._o and *.l_o to be valid object\r
- file suffixes, for Automake's ansi2knr implementation.\r
- New option -version-info replaces -version-file.\r
-\r
- [help]: Give a pointer to mode-specific help when appropriate.\r
-\r
- * ltconfig.in: Changed messages to correspond to AM_PROG_CC_STDC.\r
-\r
- * demo: Also test Automake's ansi2knr support.\r
-\r
-1996-11-19 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Bug fixes for AIX 4, and for static platforms.\r
-\r
- * ltmain.sh.in (install): Fix for loops over arguments.\r
- Need to quote ${IFS= } -> "${IFS= }".\r
- (link): Fix soname_spec bug. Create objdir whether or not we have\r
- shared libraries.\r
-\r
- * ltconfig.in: Check for library stripping program.\r
- Use test -f instead of test -e.\r
-\r
-1996-11-18 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltconfig.in: Don't run the RANLIB test unless RANLIB wasn't\r
- set.\r
- Be verbose about the environment variables we were configured\r
- with.\r
-\r
- * ltmain.sh.in (objdir): change to .libs.\r
-\r
-1996-11-16 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in (install): Just plunge ahead with the\r
- installation... don't try to enforce dependencies.\r
-\r
-1996-11-15 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh.in: Fix up $libdir to be $dest in install mode.\r
-\r
-1996-11-10 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * ltmain.sh: Finished rewrite of compile, link, and install\r
- modes.\r
-\r
- * New ChangeLog file for libtool-0.7, since I've totally rewritten\r
- libtool.\r
-\r
-1996-03-15 Gordon Matzigkeit <gord@gnu.ai.mit.edu>\r
-\r
- * For historical reasons: this is when I started writing libtool.\r
+1998-12-03 Thomas Tanner <tanner@gmx.de>
+
+ * ChangeLog: converted CR/LF back to CR format
+ * ltconfig.in: new variable sys_lib_search_path for searching
+ of installed libraries, export archive_sym_cmds and
+ sys_lib_search_path
+ * ltmain.in: use sys_lib_search_path, removed extradeplibs
+ (they're not portable)
+
+1998-12-02 Gary V. Vaughan <gvaughan@oranda.demon.co.uk>
+
+ * libltdl/configure.in: look for string.h or else strings.h, and
+ also check for ANSI strrchr() function. Fix `undescore before
+ symbols' macro to not rely on a.out (cygwin uses a.exe!). Fix
+ `underscore for dlsym' to set cache variable properly, not just in
+ environment of AC_DEFINE(NEED_USCORE).
+ * libltdl/ltdl.h (__ptr_t): for K&R compatibility using char*.
+ * libltdl/ltdl.c (strrchr): fallback function incase none is
+ defined in libc.
+ (trim, ltdlopen): replace rindex with ANSI strrchr.
+ Add static function declarations so that we get type checking with
+ ANSI compilers. Use __ptr_t instead of void*.
+
+1998-12-01 Thomas Tanner <tanner@gmx.de>
+
+ * ltconfig.in: added -export-symbols support for GNU ld and
+ Solaris (untested), archive_sym_cmds for -export-symbols
+ * doc/libtool.texi, ltmain.in: -export-symbols is now
+ independent from -export-dynamic and does not work for modules
+ anymore
+ * ltmain.in: added some checks for -export-symbols
+ * mdemo/modules/Makefile.am: replaced -export-symbols with
+ -export-dynamic since it doesn't work for modules
+
+1998-12-01 Gary V. Vaughan <garyv@oranda.demon.co.uk>
+
+ * README: Updated homepage pointer to gnu libtool page.
+
+ * ltconfig.in (ltdll.c): update the ltdll.c file for cygwinb20.
+ Based on code from Mumit Khan <khan@xraylith.wisc.edu>.
+ (archive_cmds): correct typo libtool.c->ltdll.c. Update shell
+ commands for cygwin32.
+
+ * libtool.m4 (AM_SYS_SYMBOL_UNDERSCORE): New macro; find out
+ whether compiled symbols have an extra leading underscore.
+ (AM_SYS_NM_PARSE): New macro (converted to m4 from ltconfig.in);
+ find a sed expression to parse global symbols from the output of
+ $NM.
+ (AM_PROG_LIBTOOL): require AM_SYS_NM_PARSE and
+ AM_SYS_SYMBOL_UNDERSCORE.
+ * demo/dlmain.c (main): Remove a single leading underscore from
+ compiled symbol names if necessary.
+
+1998-12-01 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * config.guess, config.sub: imported from autoconf pre-2.13
+
+1998-11-27 Gary V. Vaughan <garyv@oranda.demon.co.uk>
+
+ * libtool (AM_PROG_LD): Oops... we need to know the host_os for
+ the changes below. I'm not sure whether mingw32 and os2 support
+ UNC paths, if they did we wouldn't need the check, we could use
+ UNC paths on all three; or if the bug with $LD not being
+ shell-meta escaped was fixed, we could use '\\' separators on all
+ three. AC_REQUIRE'ed AC_CANONICAL_HOST.
+
+ * libtool.m4 (AM_PROG_LD): Cannonicalize the absolute path for the
+ ld program; The order is funny to provide canonicalization to
+ paths with '\\' separators as well as '/'.
+ * ltconfig.in: ditto.
+
+ * AUTHORS: Added myself as a co-maintainer.
+
+ * ltconfig.in (archive_cmds): The `;\' in a compound statement is
+ expanded wrongly for cygwin32, mingw32, aix3 and aix4. Changed to
+ `;'.
+
+1998-11-25 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * libtool.spec (URL): point to www.gnu.org
+ (Source): point to ftp.gnu.org
+
+ * Makefile.am (EXTRA_DIST): removed libtool.prj
+ Reported by Akim Demaille <demaille@inf.enst.fr>
+
+1998-11-24 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * ltconfig.in (echo): avoid shell error messages when we're
+ testing for large command line support
+ Reported by Axel Thimm <Axel.Thimm@physik.fu-berlin.de>
+
+ * doc/PLATFORMS: updated last-tested release for platforms I've
+ got access to
+
+ * THANKS: added Chris P. Ross
+
+1998-11-24 Chris P. Ross <cross@eng.us.uu.net>
+
+ * ltconfig.in: added recognition of the dynamic linker on BSD/OS 4.x
+ * README: added BSD/OS 4.x to the list of supported platforms
+ * doc/PLATFORMS: added BSD/OS 4.x support for various host id's
+
+1998-11-24 David Heine <dlheine@truffle.Stanford.EDU>
+
+ * ltmain.in (pass_all): actively pass the flags
+
+1998-11-24 Thomas Tanner <tanner@gmx.de>
+
+ * depdemo: added inter-library dependencies demo (doesn't work yet!)
+ * AUTHORS: added myself to the list of maintainers
+
+1998-11-22 Thomas Tanner <tanner@gmx.de>
+
+ * libltdl: added support for .la files, LGPL license,
+ K&R compatibility, some API changes and bugfixes
+ * ltmain.in: renamed -module flag (for compiling) to -force-static,
+ define -DSTATIC when compiling static .o files,
+ do not include directories in dld_preloaded_symbols
+ * mdemo: modified mdemo to work with the new libltdl
+ * tests/mdemo-exec.test, tests/mdemo-inst.test: use .la files
+
+1998-11-21 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * libltdl/ltdl.c: replace NULL with 0, so that we don't depend on
+ header files defining it.
+
+ * ltconfig.in (archive_cmds, osf3, osf4, solaris, sunos4): create
+ libraries with gcc -shared if using gcc without GNU ld.
+
+ * ltconfig.in: replaced occurrences of solaris2 with solaris, to
+ prepare for Solaris 7
+
+1998-11-19 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * mdemo/Makefile.am (hell_debug_LDFLAGS): -dlpreopen -> -dlopen
+ (hell_LDFLAGS): added -export-dynamic and -dlopen
+ (SUBDIRS, INCLUDES): added modules directory
+ (foo1.c, foo2.c, foo.h, libfoo1.sym, libfoo2.sym): moved to modules
+ * Makefile.am: ditto
+ * tests/mdemo-exec.test, tests/mdemo-inst.test: libraries moved
+ * mdemo/modules/Makefile.am: new file
+
+ * */Makefile.am (AUTOMAKE_OPTIONS): added no-dependencies
+
+ * ltmain.in: missing `test' between `&&' and `"$module"'
+
+ * ltconfig.in (echo_test_string): the whole ltconfig script was
+ too much for DU4.0's ksh, but the first 50 lines will be enough.
+
+ * ltmain.in (installed): new variable defined within a .la file,
+ so that libtool can now link already-installed libraries into a
+ program.
+ * NEWS: ditto
+ * doc/libtool.texi (Linking executables): document it
+
+ * ltmain.in (output_objdir): compute it from $output, not $arg
+
+1998-11-18 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * NEWS: -module and libtldl
+ * mdemo/Makefile.am: ../libltdl is within $(srcdir)
+
+1998-11-18 Thomas Tanner <tanner@gmx.de>
+
+ * libltdl, Makefile.am: added libltdl (a system independent
+ dlopen wrapper library extracted from mdemo)
+ * ltmain.in: added -module flag for compiling and linking of
+ modules. If enabled it compiles always both .o (with -DLT_RENAME)
+ and .lo files
+ * mdemo: modified mdemo to work with libltdl
+ * tests/ltdl*: added tests for libltdl
+
+1998-11-16 Steve Price <sprice@hiwaay.net>
+
+ * ltconfig.in: when $host_os is freebsd[23]* determine whether
+ the current linker format is a.out or ELF
+ * ltmain.in: add two new $version_type's, freebsd-aout and
+ freebsd-elf, to support above change
+
+1998-11-16 Stephan Kulow <coolo@kde.org>
+
+ * ltconfig.in: extent no_builtin_flag to contain -fno-rtti and
+ -fno-exceptions in case we compile with a gcc, that supports
+ this options (egcs and gcc >= 2.8)
+
+1998-11-16 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * ltmain.in (C_compiler): copy $CC before it is overwritten with
+ command-line compiler, so that we can use it to compile C sources
+ generated during the build. This fixes the problem that showed up
+ with -export-dynamic of C++ programs in egcs 1.1.
+ * NEWS: ditto
+
+1998-11-12 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * PORTING: Porting instructions are in the libtool manual already
+
+ * NEWS: Mention -export-symbols and new dlpreopen
+
+1998-11-11 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * ltmain.in (IFS): revert Gary's patch when parsing version
+ information; we still use `:' here :-)
+
+ * NEWS: updated
+ * PORTING: new file, with general instructions and inter-library
+ dependencies tips
+
+1998-11-11 Gary V. Vaughan <gvaughan@oranda.demon.co.uk>
+
+ * ltconfig.in: make use of '~' field separator in reload_cmds,
+ old_archive_from_new_cmds, old_archive_cmds, archive_cmds,
+ old_postinstall_cmds, postinstall_cmds, old_postuninstall_cmds,
+ postuninstall_cmds and finish_cmds, so that the semi-colons inside
+ if/then/else/fi and for/do/done etc. do not break the eval loop in
+ ltmain.in (below).
+ * ltmain.in: changed all of the eval loops to use an IFS of `~',
+ to allow differentiation between the end-of-statement-;
+ (now `~' is used) and end-of-substatement-; (still `;'). This
+ fixes AIX and win32 at least.
+
+1998-11-11 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * ltconfig.in (sunos*, sympat, symxfrm): remove underscore
+ prepended by the compiler
+
+1998-11-10 Toshio Kuratomi <badger@prtr-13.ucsc.edu>
+
+ * ltconfig.in: re-enable deplibs
+ * ltmain.in: support deplibs, at least for GNU/Linux/x86
+ Updated to current libtool by Thomas Tanner <tanner@gmx.de>
+
+1998-11-10 Gordon Matzigkeit <gord@trick.fig.org>
+
+ * ltmain.in (link): Make the relink warning less harsh.
+
+1998-11-07 William M. Perry <wmperry@aventail.com>
+
+ * ltconfig.in (aix3, aix4): uniquify symbol names in archive_cmds
+
+1998-11-07 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * ltconfig.in: add --falback-echo, to be used if everything else
+ fails. The tests now check the behavior of $echo for very large
+ strings, because some echo commands would just core dump (e.g.,
+ Solaris' printf). If too large strings fail, smaller ones are
+ tested.
+ (ltecho): arrange that, if the --fallback-echo method is selected,
+ echo will be defined in the libtool script so as to re-run itself,
+ not ltconfig
+ * ltmain.in: add --fallback-echo
+ (qecho) ensure that, if --falback-echo is being used, qecho is
+ defined with the full pathname of the libtool script
+
+1998-11-07 Thomas Tanner <tanner@gmx.de>
+
+ * mdemo/main.c: removed hardcoded library names; link against -lm
+ * tests/mdemo-exec, tests/mdemo-inst: pass the library names
+ to the program
+
+1998-11-07 Marc J. Fraioli <fraioli@dg-rtp.dg.com>
+
+ * README: Added DG/UX
+ * doc/PLATFORMS: ditto
+
+1998-11-04 Michael Tiemann <tiemann@cygnus.com>
+
+ * ltconfig.in (irix6): it's a little bit different from irix5
+
+1998-11-04 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * THANKS: Added Thomas Tanner and Gary V. Vaughan
+
+ * ltconfig.in, ltmain.in: updated and fixed the patches below
+
+1998-11-04 Thomas Tanner <tanner@gmx.de>
+
+ * mdemo/*: added new demo to demonstrate building of dlopenend
+ modules
+ * tests/Makefile.am, tests/mdemo*: added some tests for mdemo
+
+1998-11-04 Gary V. Vaughan <gvaughan@oranda.demon.co.uk>
+
+ * demo/configure.in: added AC_EXEEXT macro so that the tests can
+ work on cywin32/mingw32 hosts. This requires the current CVS
+ autoconf
+
+1998-11-04 Thomas Tanner <tanner@gmx.de>
+
+ * ltmain.in: New flag -export-symbols; new dlpreopen system
+ * demo/dlmain.c: removed dld_preloaded_symbol_count
+
+1998-11-04 Ian Lance Taylor <ian@cygnus.com>
+
+ * ltmain.in: On installation, don't get confused if the same name
+ appears more than once in the list of library names.
+
+1998-11-04 Ian Lance Taylor <ian@cygnus.com>
+
+ * ltconfig.in: Add objext and libext variables. Check for object
+ suffix. Check for mingw32* as well as cygwin32*. Use objext when
+ testing compiler. Add support for Visual C++ on cygwin32 when not
+ using gcc. Add objext, libext, and fix_srcfile_path to generated
+ libtool script.
+ * ltmain.in: Use .${objext} rather than .o. Use fix_srcfile_path
+ if it is set. Check for .obj as well as for .o, and for .lib as
+ well as for .a. Use .${libext} rather than .a when creating old
+ libraries.
+ * libtoolize.in: Change initial /bin/sh to @SHELL@.
+ * libtool.m4 (AM_PROG_LIBTOOL): Add AC_REQUIRE for
+ AC_CANONICAL_BUILD, so that autoconf doesn't get mixed up by the
+ AC_REQUIRE in AC_CHECK_TOOL.
+
+1998-11-04 Ian Lance Taylor <ian@cygnus.com>
+
+ * ltconfig.in: Look in the right directory for libtool.c in
+ archive_cmds for cygwin32.
+
+1998-11-04 Ian Lance Taylor <ian@cygnus.com>
+
+ * ltconfig.in: Fix cygwin32 support to avoid using a double
+ extension, to delete the def file, to set version_type to windows,
+ and to include versuffix in the DLL name.
+ * ltmain.in: Add support for a version_type of windows.
+
+1998-11-04 Ian Lance Taylor <ian@cygnus.com>
+
+ * ltconfig.in: Add cygwin32 support.
+ * libtool.m4 (AM_PROG_LIBTOOL): Call AM_SYS_LIBTOOL_CYGWIN32 on a
+ cygwin32 host. Pass DLLTOOL and AS to ltconfig.
+ (AM_SYS_LIBTOOL_CYGWIN32): New macro.
+
+1998-11-04 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * libtool.m4 (sco): fix typo
+
+1998-11-04 Ian Lance Taylor <ian@cygnus.com>
+
+ * ltconfig.in: On AIX, don't treat GNU ld specially.
+
+1998-11-04 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * ltconfig.in (hardcode_minus_L): Revert Ian's patch for
+ ltconfig.in. Although -L hardcoding is not used with GNU ld, it
+ does happen, so hardcode_minus_L must be set to yes.
+
+ * ltconfig.in (compiler_o_lo): check whether we can write directly
+ to a .lo
+
+ * ltmain.in (compiler_o_lo): if not, write to .o and rename it
+
+1998-11-04 Ian Lance Taylor <ian@cygnus.com>
+
+ * ltconfig.in: For sunos4 using GNU ld, set hardcode_minus_L to
+ no.
+ * ltmain.in: Add some hacks to make SunOS --enable-shared work
+ when using GNU ld.
+
+1998-11-04 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * THANKS: Added Marc J. Fraioli
+
+1998-11-04 Marc J. Fraioli <fraioli@dg-rtp.dg.com>
+
+ * ltconfig.in (dgux): new supported platforms
+
+1998-11-04 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * ltconfig.in (need_locks): if neither `-c -o' nor hard links are
+ available, fallback to not so safe mechanism, by setting
+ need_locks to warn
+ * ltmain.in (need_locks): when need_locks is set to warn, use the
+ lockfile to try to fail in case of incorrect concurrent builds
+
+ * THANKS: Added Eric Estievenart
+
+1998-11-04 Eric Estievenart <eric@via.ecp.fr>
+
+ * doc/libtool.texi (Compile mode): Document that -o is fully
+ supported.
+
+ * libtool.m4 (libtool-lock): new ARG_ENABLE; sets (need_locks)
+ * ltconfig.in (disable-lock): control need_locks
+ (hard_links): check whether hard-links can be used for locking
+ * ltmain.in (need_locks): use $output_obj.lock for locking
+
+1998-11-03 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * ltmain.in: correctly create libraries and programs with
+ directory components in their names
+
+1998-11-03 Eric Estievenart <eric@via.ecp.fr>
+
+ * ltmain.in (output_obj): typo
+
+1998-11-02 Ian Lance Taylor <ian@cygnus.com>
+
+ * ltconfig.in: For sunos4, add ${libname}.so$versuffix to
+ library_names_spec.
+ * ltmain.in: For version_type of sunos, set versuffix even if
+ -version-info was not used.
+
+1998-11-02 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * ltmain.in (libobj): default value must not contain directory
+ components
+
+1998-11-02 Eric Estievenart <eric@via.ecp.fr>
+
+ * ltconfig.in (compiler): detect if the compiler supports
+ -c and -o flags, create a variable compiler_c_o. Also issue
+ a big warning if it is not supported
+
+ * ltmain.in (compile): enable the -o option as input for libtool.
+ The objects are not moved if the compiler supports -o with -c.
+ Sources and objects can contain relative directories.
+ (link): enable the linking of executables into relative directories
+
+1998-11-02 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * AUTHORS: added myself as a co-maintainer
+ * THANKS: and removed my name from here
+
+ * autogen: new script; run it to bootstrap libtool after checking
+ it out from CVS
+
+ * libtool.m4 (CFLAGS): check whether -belf is needed on SCO, as
+ suggested by Robert Lipe <robertl@dgii.com>
+
+1998-10-31 Gordon Matzigkeit <gord@trick.fig.org>
+
+ * demo/Makefile.am (hc-libpath): Use parameters from the libtool
+ in the top build directory, since the one in the demo directory is
+ not guaranteed to exist.
+
+1998-10-27 Alexandre Oliva <oliva@dcc.unicamp.br>
+
+ * demo/Makefile.am (objdir): there are no longer quotes around
+ objdir in the libtool script
+
+1998-10-27 Gordon Matzigkeit <gord@trick.fig.org>
+
+ * ltconfig.in (dynamic_linker): Echo the result to fd 6, so that
+ --silent works correctly. From William M. Perry.
+
+1998-09-24 Gordon Matzigkeit <gord@trick.fig.org>
+
+ * ltmain.in (link): Fix problems when building only static
+ libraries. From Owen Taylor.
+
+1998-08-20 Gordon Matzigkeit <gord@trick.fig.org>
+
+ * ltmain.in (install): When library_names_spec has redundancies,
+ avoid deleting the main library when installing symlinks. From
+ Jeff Dairiki.
+ (link): Get rid of backticks in a here doc comment.
+ This causes segfaults on Solaris 2. From Aleksandar Bakic.
+ (finish): Don't display messages
+
+ * ltconfig.in (archive_cmds): On HP-UX 9, make sure we don't try
+ to move a file to itself. From Jeff Dairiki.
+
+1998-08-19 Gordon Matzigkeit <gord@trick.fig.org>
+
+ * ltconfig.in: Make changes to accomodate ltmain.c.
+
+ * Makefile.am (clibtool): New target for the C version of libtool.
+
+ * ltmain.c: Experimental C version of libtool.
+
+1998-07-10 Ian Lance Taylor <ian@cygnus.com>
+
+ * ltmain.in (install): Test against both $SHELL and /bin/sh.
+
+1998-06-30 Gordon Matzigkeit <gord@trick.fig.org>
+
+ * ltmain.in: Convenience archive support. From Ulrich Drepper.
+
+ * ltconfig.in (postinstall_commands): Change libraries to be
+ executable on Solaris in order to prevent ldd from moaning. From
+ Julian Gosnell.
+ (whole_archive_flag_spec): New variable to shortcut convenience
+ archive expansion. From Ulrich Drepper.
+
+1998-06-11 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in, ltmain.in: Change globs to accept forward slashes
+ in absolute directory names used on DOS-like systems. From Robert
+ S. Maier.
+
+Thu May 28 18:59:08 1998 Ian Lance Taylor <ian@cygnus.com>
+
+ * ltconfig.in: Use $SHELL when invoking shell scripts.
+
+1998-05-21 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in (compile): Don't have `-static' turn off libtool
+ libraries, so that people can use it just to guarantee that `.o'
+ files exist. Suggested by David Mosberger-Tang.
+
+1998-05-18 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in (link): Possibly reexec the shell from within the
+ wrapper script.
+ Allow `-version-info' and `-release' to coexist again. If people
+ want to shoot themselves in the foot, I'd better let them do so,
+ so that people who are smart enough not to can squeeze out another
+ ounce of functionality. From Tim Janik.
+ (version_vars): Delete dead variable.
+
+ * ltconfig.in (hardcode_minus_L): FreeBSD 3.0 doesn't hardcode, at
+ last. Reported by Jason Nordwick.
+
+ * libtoolize.in, ltconfig.in, ltmain.in: Change a bunch of `if
+ test ...; then : ; else ...' constructs to `if test ! ...; then
+ ...', for clarity.
+
+1998-05-17 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in (LC_ALL, LANG): Save these values and restore them
+ during execute mode. From Pavel Kankovsky.
+ (mode): Accept strace and truss as programs that throw us into
+ execute mode. From Pavel Kankovsky.
+
+1998-05-07 Ian Lance Taylor <ian@cygnus.com>
+
+ * ltconfig.in: Don't use .$versuffix or .$major. Instead, assume
+ the variable will include any required prefix.
+ * ltmain.in: If no -version-info option was used, produce empty
+ version strings rather than 0.0.0. When making library symlinks,
+ avoid making a symlink if the name would be the same.
+
+1998-04-27 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in (link): Support `unsupported' as a hardcode_action.
+ Reported by Lars Hecking.
+ (lib_linked): Do some sanity checking to make sure that we
+ actually do link libtool libraries into the program to prevent the
+ above problem from happening again.
+
+1998-04-20 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in: Maybe reexec under $SHELL, if $echo doesn't work.
+ Reported by Lars Hecking.
+
+1998-04-19 Gordon Matzigkeit <gord@profitpress.com>
+
+ * Makefile.am (maintainer-rekey): New rule to force us to change
+ Project-Version after we make a release. This keeps all version
+ numbers in sync, rather than branching just before the release.
+ (maintainer-release, maintainer-checkin): Use maintainer-rekey.
+
+ * ltmain.in (finish): Notice when a finish command fails, so that
+ we can add it to the list of recommendations.
+
+1998-04-17 Gordon Matzigkeit <gord@profitpress.com>
+
+ * libtool.m4 (AM_PROG_LIBTOOL): Append file descriptor 5 to
+ config.log, so that configure doesn't clobber the messages that
+ ltconfig put there. From David Taylor.
+
+1998-04-15 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in (archive_cmds): Try using `$CC -shared' when
+ configuring for GCC under irix5 and irix6. From Wolfram Gloger.
+ (ofile): Add `--output' flag to change the name of the generated
+ libtool. Suggested by Wolfram Gloger.
+
+1998-04-14 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in: Remove all hardcoded references to ltmain.in in
+ favour of $PACKAGE and $PROGRAM.
+ (install): Compute the installation name for programs, in case we
+ install a relinked file which has a different name. Reported by
+ Pieter Schoenmakers.
+
+ * ltconfig.in (echo): Try using the ksh(1) `print -r' builtin
+ command, before reverting to printf(1).
+
+ * Makefile.am (libtool): Use $(SHELL) when invoking ltconfig.
+
+ * ltconfig.in (echo): Rewrite the test for a working echo so that
+ we win on Solaris by avoiding printf(1), if possible.
+
+1998-04-13 Ian Lance Taylor <ian@cygnus.com>
+
+ * libtool.m4 (AM_PROG_NM): Don't override NM in the environment.
+
+1998-04-13 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in: New `--config' flag to print out all configured
+ variables.
+
+ * libtool.m4: Pass ltconfig the undocumented --no-reexec flag,
+ since we call it explicitly using CONFIG_SHELL.
+
+ * ltconfig.in: Restart the script under a different shell if
+ CONFIG_SHELL is not /bin/sh. This way, people can use Bash if
+ they don't have a working echo program.
+
+ * ltmain.in, ltconfig.in: Use $SHELL instead of /bin/sh when
+ generating executable scripts.
+
+ * libtoolize.in, ltconfig.in, ltmain.in: Implement the `--debug'
+ flag to begin shell tracing.
+
+ * ltconfig.in (archive_cmds): Don't use `gcc -shared', even if we
+ have GNU ld. Reported by Robert S. Maier.
+
+1998-04-06 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in (pic_flag): Create more than just a null C file, so
+ that the SunPRO 4.2 cc doesn't complain. From Bob Friesenhahn.
+ (gnu_ld_acts_native): Delete this variable. There is just too
+ much version skew to try to pretend GNU ld is the same as the
+ system ld. Reported by Ian Lance Taylor.
+ (hardcode_action): Don't bother relinking or aborting on systems
+ that are too dynamic to have a consistent hardcode method.
+ Reported by Doug Winterburn.
+
+1998-03-24 Gordon Matzigkeit <gord@profitpress.com>
+
+ * doc/libtool.texi: A little proofreading. From Albert
+ Chin-A-Young.
+
+1998-03-23 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in: Treat HP-UX 11 just like HP-UX 10. From Jeff Law.
+
+1998-03-21 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in (reload_flag): Correct a tiny bug where `--silent'
+ would still print out the reload flag. From Stephan Kulow.
+
+1998-03-20 Ian Lance Taylor <ian@cygnus.com>
+
+ * libtool.m4: Use changequote to avoid problems with square
+ bracket patterns.
+
+1998-03-20 Gordon Matzigkeit <gord@profitpress.com>
+
+ * Release 1.2.
+
+1998-03-18 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in: Rearrange some of the echos to make them more
+ consistent.
+
+1998-03-14 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in: Break up an echo command that causes Solaris printf
+ to dump core. Apparently the Solaris people hardcoded a 2110-byte
+ buffer into their printf(1). Feh. From John Judge.
+
+1998-03-11 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in: Change the test for the PIC compiler flag so that
+ we assume it doesn't work if there are any warning messages. This
+ fixes a bug using old GCC's on HP-UX. Reported by Akim Demaille.
+
+1998-03-10 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+
+ * Makefile.am ($(srcdir)/ltconfig): Remove bogus command to create
+ a file ltconfig in the build directory.
+
+1998-03-09 Andreas Schwab <schwab@issan.informatik.uni-dortmund.de>
+
+ * ltmain.in: Avoid unnecessary use of command substitution,
+ replacing foo=`eval \\$echo \"$mumble\"` by eval foo=\"$mumble\".
+
+ (link): Use ${1+"$@"} in wrapper scripts in order to pass
+ arguments safely to a program.
+
+ * ltconfig.in: Use -fpic instead of -fPIC if $host_cpu matches
+ m68*.
+
+1998-03-08 Gordon Matzigkeit <gord@profitpress.com>
+
+ * Release 1.1.
+
+ * ltmain.in: <sigh> I like `here documents' a lot, but apparently
+ they are so badly handled by old and buggy /bin/sh's, that
+ replacing `cat <<EOF ... EOF' by `$echo "..."' improves libtool's
+ speed by a factor of 5. So, I've eliminated here docs from the
+ all-important ltmain.in. From Tom Lane.
+
+1998-03-07 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in: Copy the contents of ltmain.sh into the generated
+ libtool. This should more than halve the execution times on old
+ or buggy /bin/sh systems, such as HP-UX 9 and SunOS 4.1.4. From
+ Tom Lane.
+
+1998-03-05 Gordon Matzigkeit <gord@profitpress.com>
+
+ * libtool.m4 (AM_ENABLE_SHARED, AM_ENABLE_STATIC): Add support for
+ the `default' package, so that people can control unnamed
+ packages.
+ (LD): Only add an ABI flag under IRIX 6.x, since IRIX 5.x doesn't
+ support them. From Alexandre Oliva.
+
+1998-03-01 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in: Port to UnixWare 2.x. From Christopher Olsen.
+
+1998-02-25 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in (compile): For consistency, honour the `-static' flag
+ during compilation.
+
+1998-02-23 Brendan Kehoe <brendan@cygnus.com>
+
+ * libtool.m4 (AM_ENABLE_SHARED, AM_ENABLE_STATIC): For
+ --enable-shared, heed the value of $PACKAGE from AM_INIT_AUTOMAKE
+ if given as the argument for the library to be built shared.
+
+1998-02-20 Gordon Matzigkeit <gord@profitpress.com>
+
+ * libtool.m4, ltconfig.in (NM): Fix up a typo confusion between
+ $ac_dir and $dir. Reported by Akim Demaille.
+
+ * ltmain.in (link): Don't allow both `-version-info' and
+ `-release'. Reported by Danny Backx.
+
+1998-02-18 Gordon Matzigkeit <gord@profitpress.com>
+
+ * Makefile.am (noinst_SCRIPTS): Remove lineno from distribution.
+
+ * lineno: Remove from distribution, as it is no longer needed.
+
+ * Makefile.am ($(srcdir)/ltconfig.in, $(srcdir)/ltmain.sh):
+ Rewrite these rules not to use config.status or lineno. This
+ makes things simpler, and reduces dependencies, so that the
+ scripts are rebuilt and installed in srcdir only when necessary.
+ Reported by Stephan Kulow.
+
+1998-02-16 Gordon Matzigkeit <gord@profitpress.com>
+
+ * libtool.m4, ltmain.in, ltconfig.in: Correctly identify absolute
+ directory names on MS-DOS. Suggested by Bob Friesenhahn.
+
+ * ltconfig.in, ltmain.in, libtool.m4: Change a bunch of `sed N!d'
+ commands to `sed Nq', for efficiency.
+
+ * ltmain.in: Only egrep the first few lines of files in order to
+ determine if they were libtool-generated. This prevents egrep(1)
+ from taking forever to look at a 10MB binary on Solaris. From
+ Stephan Kulow.
+
+1998-02-11 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in (no_undefined_flag): Add a flag to declare under
+ Solaris that the library should not have any undefined
+ references. Suggested by Bob Friesenhahn.
+
+ * ltmain.in (mkdir): Fix one more mkdir race. From H.J. Lu.
+
+1998-02-08 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in, ltmain.in (striplib, old_striplib): Ditto.
+
+ * ltconfig.in (profile_flag_pattern): Get rid of dead code.
+
+1998-02-07 Gordon Matzigkeit <gord@profitpress.com>
+
+ * libtool.m4 (AM_ENABLE_SHARED, AM_ENABLE_STATIC): New macros to
+ modify the `--enable-shared' and `--enable-static' defaults in the
+ configure script. This works a lot better than the old
+ `enable_shared' and `enable_static' variables did. Reported by
+ Bob Friesenhahn.
+
+1998-02-07 Samuel Tardieu <sam@inf.enst.fr>
+
+ * ltmain.in: Recognize .ada, .ads and .adb as known suffixes (they
+ are used by GNAT, the GNU Ada compiler).
+
+1998-02-06 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in: Turn on IRIX shared libraries again!
+
+ * libtool.m4 (LD): Use file(1) to discover which ABI we're using
+ on IRIX, and propagate the correct linker flag. From Jim Wilson.
+
+ * ltconfig.in, ltmain.in (Xsed): `arg=-n; echo "$arg" | sed ...'
+ gives problems, because the `-n' is interpreted as an option to
+ echo(1). So, use `echo "X$arg" | sed -e 's/^X//' ...' everywhere,
+ via the $Xsed convenience variable. Suggested by H.J. Lu.
+
+1998-02-02 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in: Turn off IRIX shared library support until 32-bit
+ and 64-bit ABI differences can be resolved.
+
+1998-01-28 Gordon Matzigkeit <gord@profitpress.com>
+
+ * libtool.m4 (LD): Reverse yesterday's change because `-old_ld'
+ isn't accepted by GCC.
+
+1998-01-27 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in (soname_spec): Add in user-specified release numbers
+ for every host system that supports an soname that differs from
+ the linkname.
+
+ * libtool.m4 (LD): Add `-old_ld' to the list of flags that need to
+ be passed through on SGI. Reported by Chris Lee.
+
+ * ltmain.in (release): Prepend a hyphen to the release number, and
+ fix a typo because `-version-info' takes only 3 args. From
+ H.J. Lu.
+
+1998-01-25 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in (library_names_spec): On Linux, use the
+ user-specified release.
+
+ * ltmain.in (link): Allow the user to specify a release number for
+ the library using the `-release' flag. Suggested by H.J. Lu and
+ Ian Lance Taylor.
+
+1998-01-19 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in (old_postuninstall_cmds): Reorder so that chmod
+ happens after ranlib. From Markus F.X.J. Oberhumer.
+
+ * ltmain.in (mode): Added `gcc*' and `*-gcc*' to the patterns that
+ recognize compilers. From Pieter Schoenmakers.
+ (link): Recognize `.a' files again. Suggested by Pieter
+ Schoenmakers.
+
+1998-01-18 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in (compile): Recognize `.asm' extension, for use with
+ the nasm assembler. From Markus F.X.J. Oberhumer.
+
+1998-01-12 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in (runpath_var): Use instead of
+ `hardcode_runpath_var'.
+
+1998-01-11 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in (finish): Add a better --finish message. Suggested by
+ Kenneth Albanowski.
+
+ * ltconfig.in, ltmain.in: Fix a few typos.
+
+1998-01-03 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in (link): Quote the definition of $echo in the wrapper
+ script.
+
+ * ltconfig.in (export_dynamic_flag_spec): Use `--export-dynamic'
+ instead of `-export-dynamic', which is not accepted by all GNU
+ ld's. From Eiichi Takamori.
+
+ * ltmain.in (install): Don't print silly `library stripping'
+ warnings. Reported by François Pinard.
+
+1997-12-19 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltmain.in: Don't forget to quote the CDPATH substitution. From
+ Tor Lillqvist.
+
+1997-12-18 Gordon Matzigkeit <gord@profitpress.com>
+
+ * ltconfig.in, ltmain.in (CDPATH): Unset this environment variable
+ so that HP-UX shells, at least, don't print out the directory name
+ after a `cd' command. From Tor Lillqvist.
+
+1997-12-10 Gordon Matzigkeit <gord@gnu.org>
+
+ * demo/Makefile.am (hardcode): Change a bunch of references to
+ `$(LIBS)' to `-lm', since we no longer put -lm in LIBS.
+
+ * demo/configure.in: Delete the test for libm, since it is
+ standard on every system.
+
+ * demo/Makefile.am (libhello_la_LDFLAGS): Change to include -lm,
+ in accordance with new inter-library dependency code.
+
+ * ltmain.in (dependency_libs): Added to help people link programs
+ without having to explicitly specify inter-library dependencies.
+
+ * ltconfig.in (COLLECT_NAMES): Oops... I forgot to apply the AIX 3
+ restriction to the generated libtool script. Reported by Stefan
+ Westerfeld.
+
+1997-12-05 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltconfig.in (thisdir): Quote $echo in the generated libtool
+ script for HP-UX. From Markus F.X.J. Oberhumer.
+
+ * ltmain.in (link): Recognize the `.s' suffix. From Markus
+ F.X.J. Oberhumer.
+
+ * ltconfig.in (link_static_flag): Don't quote ${wl} on HP-UX
+ because link_static_flag is never evaled. From Eric Backus.
+
+1997-12-01 Gordon Matzigkeit <gord@gnu.org>
+
+ * demo/Makefile.am (helldl_DEPENDENCIES): Add `libhello.la' to our
+ dependencies so that parallel builds work correctly. From Jim
+ Meyering.
+
+ * Makefile.am ($(srcdir)/ltconfig, $(srcdir)/ltmain.sh): Rewrite
+ these rules so that they are parallelizable. Reported by Jim
+ Meyering.
+
+ * ltconfig.in (ltecho): We need special handling to quote the
+ `echo' variable itself. From Alexandre Oliva.
+
+1997-11-29 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltconfig.in (COLLECT_NAMES): Enable this workaround for a broken
+ collect2 only on AIX 3. This avoids problems on other AIX
+ versions. Reported by Stefan Westerfeld.
+
+ * ltmain.in, ltconfig.in (finish_eval): Variable like finish_cmds,
+ except it is a single command which is evaled, and not shown.
+
+ * ltconfig.in: Port to AmigaOS. From Joop van de Wege.
+
+ * ltmain.in (echo): Delete preamble to check for a working echo,
+ since we just use the one included in the generated libtool.
+
+ * ltconfig.in (echo): Include this definition in the generated
+ libtool script.
+
+1997-11-28 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltconfig.in, libtool.m4 (NM): Add /usr/ccs/bin to the PATH
+ before checking. From Kaveh R. Ghazi.
+ (NM): Delete an extraneous egrep from ltconfig.
+
+ * ltconfig.in (finish_cmds): Change back to using `ldconfig -n'.
+ This makes Linux behave like other systems, which is more in line
+ with what libtool needs.
+
+1997-11-27 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltmain.in: Change a whole bunch of `progname' variables to
+ `modename'. This is for clarity, and to fix a tiny typo in finish
+ mode.
+
+ * libtool.spec (Name, Version): Ditto.
+
+ * configure.in (AM_INIT_AUTOMAKE): Use PRCS to automatically generate
+ the proper package name and version number.
+
+ * ltconfig.in (gnu_ld_acts_native): Treat GNU ld like the native
+ linker on SunOS 4.x. Suggested by Alexandre Oliva.
+ (deplibs): Change the defaults all over, since most systems cannot
+ handle inter-library dependencies.
+
+ * libtool.m4, ltconfig.in (NM): Only look at the first line of the
+ output from NM when determining whether it supports a command line
+ option. This prevents false positives on OSes which ignore
+ invalid flags, like HP-UX, which prints `nm: unknown option "B"
+ ignored'. Reported by Kaveh R. Ghazi.
+
+ * ltconfig.in (finish_cmds): On Linux, update ld.so.cache by
+ removing the `-n' flag from ldconfig. Suggested by Kenneth
+ Albanowski.
+
+ * Makefile.am (maintainer-checkin, maintainer-release): New
+ commands to reap the full benefit of using PRCS to maintain
+ libtool version numbers.
+
+ * ltconfig.in, ltmain.in (global_symbol_pipe): Explicitly cast all
+ addresses to __ptr_t. This fixes a bug due to a strict IRIX
+ compiler. Suggested by Kaveh R. Ghazi.
+
+1997-11-23 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltmain.in (echo): For aesthetics, avoid using `$echo' when
+ `echo' will do *exactly* the same thing. This prevents ugly
+ `printf %s\n timestamp > some.lo' commands from appearing in the
+ libtool output.
+ (link): Delete the `-allow-undefined' flag because it is now the
+ default. Make `-no-undefined' in order for people to declare that
+ a library is entirely self-contained. This prevents maintainers
+ from accidentally creating shared libraries that won't work on
+ AIX. Reported by Stefan Westerfeld and Danny Backx.
+
+ * ltconfig.in (echo): Use an echo variable, just as in ltmain.in,
+ because we need it for quoting substitutions. For most of the
+ script, though, use the default echo, just like Autoconf does.
+ Without this patch, character \001 ends up in global_symbol_pipe.
+ Reported by Lars Hecking and Jürgen Fluk.
+
+ * ltmain.in (echo): Set default to `echo=echo'. Ooops. That's
+ what you get for testing obscure code paths and forgetting to
+ revert to the original version. Reported by Danny Backx.
+
+1997-11-14 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltconfig.in (hardcode_libdir_flag_spec): Set to `-R' for FreeBSD
+ 2.2. From Sean Kelly.
+ (postuninstall_cmds, old_postuninstall_cmds): Commands to run
+ after uninstall mode deletes the libraries. Suggested by Joop van
+ de Wege.
+ (export_dynamic_flag_spec): On HP-UX, add the `${wl}-E'
+ export_dynamic_flag_spec. Reported by Matthias Hoelzer.
+
+1997-11-11 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltconfig.in, ltmain.in (sed_quote_subst): Oops. We forgot to
+ quote backticks. Reported by Joop van de Wege.
+
+1997-11-09 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltconfig.in (symcode): On IRIX, don't extract undefined
+ symbols. When a function is inlined by G++, references to it are
+ still marked as undefined in the object file. This means that our
+ symbol file causes undefined references, because there are
+ actually no matching global symbols. Reported by Paul Kendall.
+
+1997-11-08 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltconfig.in: Don't forget to redirect the COLLECT_NAMES libtool
+ script fragment to the generated libtool, rather than to stdout.
+
+1997-11-07 Gordon Matzigkeit <gord@gnu.org>
+
+ * libtool.m4 (LD): Add a more sophisticated test to determine the
+ ABI flag on IRIX 6. Suggested by Lars Hecking and Ian Lance
+ Taylor.
+
+ * ltconfig.in, ltmain.in (COLLECT_NAMES): Only export this
+ variable if we are running under AIX. Otherwise, we tickle a g++
+ bug under IRIX. From Paul Kendall.
+
+ * Change bug reporting address to <bug-libtool@gnu.org>.
+
+ * ltconfig.in (allow_undefined_flag): OSF/1 3.x also requires a
+ wildcard argument to `-expect_unresolved'. From Stephan Kulow.
+
+1997-11-06 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltmain.in (link): Use libname_spec.
+
+ * ltconfig.in (pic_flag): Somehow, the HP-UX pic_flag (`+Z') was
+ dropped between libtool-1.0 and now. Add it back in. Reported by
+ Akim Demaille.
+ Integrated more patches for OS/2. From Jeff Freedman.
+ (libname_spec): New variable for OSes that don't require their
+ libraries to look like `libNAME.a'.
+
+ * ltmain.in (link): Only use global_symbol_pipe if it has been
+ defined. From Stephan Kulow.
+
+ * ltconfig.in (global_symbol_pipe): Protect C fragment under C++
+ compilers. From Stephan Kulow.
+
+ * Makefile.am ($(srcdir)/acinclude.m4,
+ $(srcdir)/demo/acinclude.m4): Change rules to use LN_S so that
+ they can be run on any system.
+
+ * ltconfig.in (archive_cmds): For NetBSD, don't include deplibs.
+ From Dieter Baron.
+
+ * ltmain.in (mkdir): Check that the directory doesn't exist before
+ we exit with error, so that we don't get races during parallel
+ builds. From H.J. Lu.
+ (fbsd_hideous_sh_bug): Apparently, some FreeBSD /bin/sh's have a
+ bug that will empty base_compile unless we do this dummy
+ assignment. From Marc van Kempen.
+
+1997-10-22 Gordon Matzigkeit <gord@gnu.org>
+
+ * libtool.m4 (libtool_shared, libtool_static): Fixed logic error
+ to reenable override of libtool's defaults by setting
+ enable_shared or enable_static in configure.in. Reported by Tom
+ Tromey and Stephan Kulow.
+
+ * ltmain.in (link): Add explicit support for compiler options that
+ begin with `+'. Reported by Aubert Pierre.
+
+1997-10-20 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltmain.in: Silly me. Change a bunch of occurances of "* $dir *"
+ into *" $dir "*.
+
+ * ltconfig.in (pic_flag): PIC is the default for AIX. From Mark
+ Kettenis. It is also the default for OSF/1.
+
+ * demo/Makefile.am (objdir): Quote double-quotes. From Mark
+ Kettenis.
+
+ * ltconfig.in (global_symbol_pipe): This variable is not
+ double-evaled, so it should not be double quoted. From Mark
+ Kettenis.
+
+1997-10-19 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltconfig.in (LD): Same as below.
+
+ * libtool.m4 (LD): Set LD if we discover an absolute path to GNU
+ ld. This prevents breakage when `$CC -print-prog-name=ld' returns
+ an absolute directory name. Reported by Ulrich Drepper.
+
+ * ltconfig.in: Port to OS/2 using EMX. From Jeff Freedman.
+
+ * ltmain.in (link): Use old_archive_from_new_cmds.
+
+ * ltconfig.in (old_archive_from_new_cmds): New variable to
+ support DLL libraries.
+
+ * ltmain.in (link): Only `eval' export_dynamic_flag_spec if it is
+ not empty. Reported by Stephan Kulow.
+
+1997-10-18 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltconfig.in (objdir): Use the .libs directory on all systems for
+ which that name is valid, and _libs on the others (like MS-DOS).
+ Suggested by Juergen Erhard.
+
+1997-10-14 Gordon Matzigkeit <gord@gnu.org>
+
+ * ltmain.in (link): Added a bit more inter-language support to the
+ symbol file generation process.
+ Instead of complaining about unrecognized argument suffices, pass
+ them to the linker. This prevents libtool from barfing on
+ mandatory arguments to linker flags. Reported by Michael
+ Tiemann.
+
+1997-10-09 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.in (link): Change the wrapper script to follow symlinks
+ in order to find thisdir. This should put the final nail in the
+ coffin for problems with wrapper scripts. From Ian Lance Taylor.
+
+1997-10-07 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.in: Change a few `$echo' commands into `$show' to make
+ --silent mode behave as advertised.
+
+ * ltconfig.in (allow_undefined_flag): On OSF/1 4.x, use
+ `-expect_unresolved \*'. From Christian Mondrup.
+
+ * ltmain.in (install): Change install mode to allow a specified
+ /bin/sh argument at the beginning of the install_prog. Also,
+ specify the shell to run when invoking libtool recursively for
+ finish mode. From Chris Provenzano.
+
+ * libtool.m4 (LIBTOOL): Change definition to include $(SHELL).
+ From Chris Provenzano.
+
+ * ltconfig.in: Port to UTS 4.x. From Alistair Crooks.
+
+ * demo/Makefile.am (hc-libflag): Add rules to make this binary for
+ hardcode.test.
+
+1997-09-24 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in (LD): As with libtool.m4, don't override LD.
+ Do a whole bunch of ac_t quoting.
+
+1997-09-24 Ian Lance Taylor <ian@cygnus.com>
+
+ * libtool.m4 (AM_PROG_LD): Don't override LD in the environment.
+
+1997-09-21 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * libtool.m4, ltconfig.in (NM): Arguments to the for loop must be
+ whitespace separated. This fixes a bug under FreeBSD's /bin/sh.
+ From George Scott.
+
+1997-09-20 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.in (deplibs): When building shared libraries, always add
+ -lc to deplibs. Reported by Andreas Jellinghaus.
+
+1997-09-15 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in, ltmain.in (COLLECT_NAMES): If the COLLECT_NAMES
+ environment variable has not been set, set it to empty. This
+ apparently fixes the AIX bug with GCC's collect2. Reported by
+ Mark Kettenis.
+
+ * demo/Makefile.am, ltmain.in, tests/hardcode.test (objdir):
+ Changed objdir variable .libs to _libs. This is another MS-DOS
+ portability fix. Suggested by Robert Hoehne.
+
+1997-09-13 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in, ltmain.in (hardcode_minusL): Fix typo by renaming
+ hardcode_minusL to hardcode_minus_L. Also add FreeBSD
+ hardcode_libdir_flag_spec. From Paul Traina.
+
+ * ltmain.in (link): Honour multiple `-rpath' flags when linking
+ programs. Suggested by Bengt Martensson.
+ Quote appearances of $echo in the wrapper script. From Alexandre
+ Oliva.
+
+ * Makefile.am, configure.in, tests/tlibtool: Use ltmain.in instead
+ of ltmain.sh.in.
+
+ * ltmain.in: Rename ltmain.sh.in to ltmain.in. This fixes a
+ portability problem (on MS-DOS, of all places!). From Robert
+ Hoehne.
+
+1997-09-11 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Do not transform libtool objects to regular
+ objects if we did not build old libs. Reported by Tomas Hiller.
+
+1997-09-05 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * demo/Makefile.am (hell_debug_LDFLAGS): Change hell.static to
+ hell.debug in order to reflect the new static linking semantics.
+
+ * ltmain.sh.in (link): Add new `-all-static' flag to prevent all
+ dynamic linking. The old `-static' flag just prevents dynamic
+ linking against libtool libraries. Suggested by Bengt
+ Martensson.
+
+ * ltconfig.in (with_gnu_ld): Add a test to make sure that we are
+ actually using GNU ld. This fixes an inconsistency when running
+ ltconfig without using libtool.m4. Reported by Ulrich Drepper.
+ (global_symbol_pipe): Delete symbols that are not valid C
+ identifiers. Reported by Johan Danielsson and Bengt Martensson.
+
+1997-09-04 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (echo): Quote all the uses of `echo' in all eval
+ statements. Reported by Bengt Martensson and Alexandre Oliva.
+ (echo): Need to surround test args with double quotes, or the echo
+ test fails on Digital Unix 4.0. From Todd Kover.
+
+1997-08-28 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (echo): Change test to one that uses printf.
+ This works on AIX, which has the same problems that Solaris does,
+ but no working echo program.
+
+1997-08-27 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Make sure that compile_command and
+ finalize_command are always evaled. Quote any unknown linker
+ flags we need to pass through.
+ (compile): Use quoting for flags we pass.
+ (echo): I hate Sun! The /usr/bin/echo on Solaris handles
+ backslash sequences, which makes it impossible to do backslash
+ quoting using echo and sed. So, we search for an echo that obeys
+ the `echo '\t'` = '\t' equality. Then we use `$echo' everywhere
+ in ltmain.sh.
+ Put tabs back into the ${IFS= } sequences. Emacs untabify is
+ libtool bane.
+
+ * ltconfig.in: Quote all variable values that may contain
+ metacharacters creating the libtool script. This provides
+ complete protection, so that even single-quotes may appear inside
+ a libtool variable value.
+
+ * ltmain.sh.in (link): Quote finalize_command before putting it in
+ the wrapper script.
+
+1997-08-26 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (sed_quote_subst): Change the quoting procedure
+ again. I think that the new one is robust for *all* characters,
+ including whitespace and metacharacters.
+
+1997-08-25 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in: Change quoting procedure because some shells
+ cannot handle `]' in scan sets. From Ian Dall.
+
+1997-08-22 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (execute): Added -dlopen flag handling. Suggested
+ by Alexandre Oliva.
+
+1997-08-21 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Change executable wrapper to fix up value
+ of thisdir, as well as progdir, if the $0 path doesn't work. This
+ guarantees that shlibpath_var is set correctly. Add support for
+ execute mode.
+
+ * ltmain.sh.in (execute): New mode to automatically set
+ shlibpath_var, which allows easy debugging of uninstalled
+ executables and libraries. Suggested by Kenneth Albanowski.
+
+1997-08-20 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * Makefile.am ($(srcdir)/ltconfig): Use lineno.
+
+ * configure.in: Add AM_PROG_AWK for lineno.
+
+ * lineno: New program to automatically put line numbers in
+ ltconfig.
+
+ * libtool.m4, ltconfig.in (AM_PROG_LD): Yet Another Rewrite, which
+ incorporates the results of `gcc -print-program-name=ld'.
+ Suggested by Alexandre Oliva.
+
+1997-08-14 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in: Accept `--quiet' and `--silent' flags to turn off
+ command echoing. From Juergen A. Erhard.
+
+ (compile): Recognize the Objective C `.m' extension. From Juergen
+ A. Erhard.
+
+ (compile): Suppress error output from the second compilation (if
+ any) so that we don't get those frustrating duplicate error
+ messages.
+
+1997-08-12 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Added messages to config.log to describe what sort
+ of test we are running.
+ (pic_flag): Added a sanity check for pic_flag. This should fix
+ bugs reported using the cc bundled with HP-UX 10. Suggested by
+ Bruno Haible and Akim Demaille.
+
+1997-08-01 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Add -dlopen and -dlpreopen support for
+ libtool objects. This means that dlopened modules no longer need
+ to be shared libraries.
+
+ * ltconfig.in (pic_flag): GCC on IRIX 6 always builds PIC.
+ Reported by Ian Lance Taylor.
+
+ * libtool.m4 (LD): Always add `-n32' to the linker if we are using
+ GCC on IRIX 6. Reported by Ian Lance Taylor.
+
+1997-07-30 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * libtool.m4 (AM_PROG_LIBTOOL): Explicitly check enable_shared and
+ enable_static rather than just enableval. This allows
+ configure.in scripts to set their own defaults. Suggested by
+ Tommy Reilly.
+
+1997-07-29 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in: Add NLS environment variable handling copied from
+ ltconfig.in. Reported by Akim Demaille.
+ (link): If allow_undefined_flag is not supported, then turn on old
+ libraries. Reported by Akim Demaille.
+
+ * demo/dlmain.c (main): Use dld_preloaded_symbol_count to display
+ a message about the sortedness of the symbol table.
+
+ * ltconfig.in (nlist): Use an nlist convenience variable, so that
+ code can be shared directly with ltmain.sh.in.
+
+ * ltconfig.in, ltmain.sh.in (dld_preloaded_symbol_count): Count up
+ the number of symbols in the dld_preloaded_symbols. Set to `-1'
+ if the list wasn't both sorted and counted. This allows
+ applications to do a quick binary search, if they are so inclined.
+
+1997-07-25 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Remove code for `-version-file', since it
+ has been long-deprecated.
+
+ Disable static linking if hardcode_direct is unsupported and there
+ is no working link_static_flag. This provides correct behaviour
+ for all cases on AIX 3, regardless of whether collect2 is broken
+ or not. Reported by Mark Kettenis.
+
+ * ltconfig.in: Fix typo in test polarity. From Mark Kettenis.
+
+1997-07-24 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in (hardcode_direct): Set to `unsupported' if aix3 uses
+ a broken collect2. Adapted out of test results from Mark
+ Kettenis.
+ (link_static_flag): Make sure the link_static_flag actually works
+ with a trivial binary.
+
+ * ltmain.sh.in, ltconfig.in (export_dynamic_flag_spec): Renamed
+ from export_dynamic_flag because we eval it in ltmain.sh.
+
+ * ltmain.sh.in (link_static): Don't eval link_static_flag.
+
+ * demo/dlmain.c (main): Change function prototype to be KNR
+ compatible. From Kaveh R. Ghazi.
+
+ * ltmain.sh.in (link): Use no_builtin_flag. This works around
+ conflicting definitions of builtin functions with at least GCC.
+ Reported by Kazuhiro Sasayama.
+
+ * ltconfig.in (no_builtin_flag): New flag to turn off builtin
+ functions when compiling an object file.
+ (pipe_works): Use it.
+
+1997-07-23 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in (pic_flag): According to the libg++ 2.7.2 configure
+ script, DEC alpha CPUs are PIC-only, as well. Reported by Kevin
+ Jacobs.
+
+1997-07-21 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in, ltmain.sh.in: Replace all occurances of "sed 'X;
+ Y'" with "sed -e 'X' -e 'Y'".
+
+ * ltmain.sh.in (link): Finish full integration for `-dlopen' and
+ `-dlpreopen'.
+
+ Fix two silly typos where I used a compile_command in place of a
+ finalize_command, and vice versa.
+
+ Change the wrapper script to check a hardcoded path only if the
+ argv[0] method fails. This is a compromise for the previous two
+ patches, and should solve the majority of problems with wrapper
+ scripts. From Kenneth Albanowski.
+
+ (link): Change a reference to hardcode_libdir_colon_separated to
+ use the new hardcode_libdir_separator variable.
+
+ * demo/Makefile.am (helldl_LDFLAGS): Add `-export-dynamic' and
+ `-dlpreopen' for building helldl.
+
+ * demo/dlmain.c (main): Succeed, even if none of the libhello
+ symbols have been preloaded.
+
+1997-07-20 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in (global_symbol_pipe): Add `U' to the accepted global
+ symbol types. This means that we will get duplicate symbols, but
+ we'll also be sure to get all global symbols used by the program.
+
+ * ltconfig.in (pipe_works), ltmain.sh.in (link): Sort and make
+ symbol output unique.
+
+1997-07-19 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in (pipe_works): Check to make sure our guessed
+ global_symbol_pipe actually works.
+
+ * ltmain.sh.in (link): Revert change from Kenneth Albanowski. The
+ wrapper scripts are more reliable when they just use the argv[0]
+ value. Generally, when the argv[0] method doesn't work, the user
+ is trying to do something weird with an uninstalled binary, and
+ should try a different approach.
+
+ * ltconfig.in, ltmain.sh.in (CC): Always use `$CC' instead of
+ `$cc'. This fixes a FreeBSD bug. Reported by Chuck Robey, and
+ others.
+
+1997-07-14 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): In wrapper scripts, hardcode the current
+ directory to prevent phony argv[0] values from screwing up our
+ program. From Kenneth Albanowski.
+
+1997-07-13 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * Makefile.am (demo_distfiles): Add demo/dlmain.c to the
+ distribution.
+
+1997-07-12 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * demo/Makefile.am: Add helldl, made from dlmain.c, to demostrate
+ `-dlopen' usage.
+
+ * demo/dlmain.c: New file to demonstrate preloaded modules.
+
+ * ltmain.sh.in (link): Add `-dlopen' flag to preload dynamic
+ modules, even on static platforms. Use `$NM' and
+ `$global_symbol_cmd' to extract symbols from required files.
+ (dlname): Delete dlname mode entirely. It is rendered obsolete
+ because the `.la' file format is now a public interface.
+
+ * ltconfig.in (NM): New variable for BSD-compatible nm program.
+ (global_symbol_cmd): Pipeline to extract global symbols from the
+ nm output.
+
+ * ltmain.sh.in: The .la file header should depend on `ltmain.sh',
+ not `$PROGRAM'.
+ (link): Make sure $export_dynamic_flag is eval'ed before it is
+ used.
+
+1997-07-11 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * libtool.spec: New Red Hat Package Manager specification file in
+ order to help people prepare distributions of libtool for Linux.
+
+ * ltmain.sh.in: Eliminate two accidental uses of the NONE magic
+ value. These were breaking libtool's behaviour when no mode is
+ specified.
+
+1997-07-08 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * Release 1.0.
+
+ * ltconfig.in: On SunOS, append /usr/etc to the PATH before
+ running ldconfig; on *BSD, append /sbin. This was done in line
+ with the Linux change suggested by Kenneth Albanowski.
+
+ * demo/Makefile.am (hardcode_tests): Aesthetic change to
+ alphabetize order of compiling the hardcode tests.
+
+ * Makefile.am (EXTRA_DIST): Delete README-automake.
+
+ * README-automake: Remove from distribution.
+
+1997-07-02 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): In the executable wrapper, strip trailing
+ colons from the shlibpath_var because some ld.so's, notably
+ OpenBSD 2.0's (!), don't parse colon-terminated values correctly.
+ From Tim Pierce.
+
+1997-07-01 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in, ltconfig.in: Eliminate uses of the NONE magic
+ variable value. Use an empty variable instead.
+
+ * ltconfig.in (with_gcc, with_gnu_ld): Do the tests for the C
+ compiler and linker if the variables are unset, or if they are not
+ GNU C and ld.
+ (RANLIB): Eliminate redundant `if' statement.
+
+ * configure.in: Use AM_PROG_LD.
+
+ * libtool.m4 (AM_PROG_LD_GNU): New macro to determine if LD is GNU
+ ld.
+ (AM_PROG_LD): Rename AM_PATH_PROG_LD to AM_PROG_LD. Parameterize
+ so that the user can specify `--with-gnu-ld' or `--without-gnu-ld'
+ to indicate his preference.
+ (AM_PROG_LIBTOOL): Use it.
+
+1997-06-30 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Append /sbin to the path before running ldconfig on
+ Linux. This helps superusers who haven't set their PATH
+ correctly. Suggested by Kenneth Albanowski.
+
+1997-06-29 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in: Change all the `eval "$run ..."' sequences to
+ `$run "eval ..."'.
+
+ Change all `$ln_s ...' sequences to use `(cd /dir && $LN_S ...)'.
+ This is the sequence recommended by the Autoconf manual, and
+ should avoid any problems on older machines. Eliminate all uses
+ of `cp -p'. Reported by Akim Demaille.
+
+ (install): Use `test $# -gt 0' instead of `test -n "$1"'.
+
+ * ltconfig.in (LN_S): Add test to see if `ln -s' works.
+
+ * libtool.m4: Increment serial number, and require AC_PROG_LN_S.
+
+1997-06-26 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Add missing `test' statement. Reported by
+ Akim Demaille.
+
+1997-06-24 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * libtool.m4 (LD): Consistently use ac_cv_path_ld instead of
+ am_cv_path_ld. From Tim Pierce.
+
+1997-06-20 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in: Redo two robustness fixes. Alexandre had the
+ correct approach, but I botched them.
+
+ * ltconfig.in (dynamic_linker): Disable shared libraries on
+ MkLinux unless GNU libc is in use. Reported by Akim Demaille.
+
+1997-06-19 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (install): Add a missing `test' command. Reported
+ by Joel Weber.
+ Miscellaneous fixes to improve robustness. From Alexandre Oliva.
+
+1997-06-14 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Create invalid libtool objects when partial
+ linking if we don't have PIC. From Jeff Dairiki.
+ (install): Fix bug if libtool object is installed to a file name
+ without directory components. From Jeff Dairiki.
+
+1997-06-13 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * Makefile.am (demo/configure): Fix up rules to run autoconf.
+ (aclocal.m4): Now we depend on our own libtool.m4.
+
+ * configure.in (AM_PATH_PROG_LD): Use it.
+
+ * libtool.m4 (AM_PATH_PROG_LD): New macro to find the linker used
+ by the C compiler.
+ (AM_PROG_LIBTOOL): Use it.
+
+ * ltmain.sh.in (install, uninstall): Support installing and
+ uninstalling `.lo' files. From Jeff Dairiki.
+
+1997-06-11 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * Makefile.am (ltconfig, ltmain.sh): Only move if $(srcdir) is not
+ the current directory. Don't regenerate every time the package is
+ reconfigured. Reported by Tom Tromey.
+ (MAINTAINERCLEANFILES): Added ltconfig, ltmain.sh, so that
+ $(srcdir) is not messed with during a regular clean.
+
+1997-06-10 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * Makefile.am (ltconfig, ltmain.sh): Be sure to move these files
+ into $(srcdir) once they are created.
+
+ * ltmain.sh.in (link): Disable building static libraries.
+ People should use their favourite AR and RANLIB commands.
+ Disable building old-style objects if `--disable-static' is
+ given. Suggested by Tom Lees and Stephan Kulow.
+
+1997-06-08 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in (host_cpu, host_vendor, host_os): Patch up
+ definitions, to allow for the fact that the host_os may contain
+ hyphens (as in linux-gnu). From Scott Goehring.
+
+ * ltmain.sh.in (link): Move the `dlname' setting closer to the top
+ of the file. Suggested by David Mosberger-Tang.
+ Symlink the libtool archive into the `.libs' directory so that it
+ can be found by programs that want to find a library's dlname by
+ searching LD_LIBRARY_PATH. Reported by David Mosberger-Tang.
+
+1997-06-06 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * Tell people to report bugs to the new libtool mailing list,
+ <bug-libtool@gnu.ai.mit.edu>.
+
+1997-06-05 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in (allow_undefined_flag): New variable that implements
+ `-allow-undefined'.
+ (archive_cmds): Enable C++ constructors for FreeBSD 2.2. From
+ David Nugent.
+
+ * ltmain.sh.in (link): Accept new `-allow-undefined' flag when
+ building libtool libraries. This tells libtool to allow
+ unresolved symbols to exist in shared libraries. Basically, this
+ turns off shared libraries on AIX. Suggested by Ian Lance Taylor.
+
+1997-05-26 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * libtool.m4 (LD): On at least IRIX, many different flags need to
+ be propagated to the linker if they are part of the compiler
+ command line. Reported by Anthony Green.
+
+1997-05-10 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Trivial port to FreeBSD 3. From David Nugent.
+
+1997-04-25 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Remove all traces of `-whole-archive',
+ `-no-whole-archive', and libtool convenience libraries. They were
+ more trouble than they're worth. If these are ever reimplemented,
+ they need more careful attention to make portable.
+
+ * libtool.m4, ltconfig.in: Added a `--disable-static' flag to turn
+ off static library creation. From Tom Lees (who finally convinced
+ me that it was the Right Thing to do).
+
+1997-04-22 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (hardcode_runpath_var, runpath_var): Use them, if
+ the linker has no -rpath flag.
+ Quote the values we use to set runpath_var and shlibpath_var.
+ (link): Use libobjlibs for libtool convenience libraries.
+
+ * ltconfig.in (hardcode_runpath_var, runpath_var): Add new
+ variables to describe linkers that honour `LD_RUN_PATH'.
+ (host_cpu, host_os): Use these more specific variables, rather
+ than the full canonical host system name.
+
+ * ltmain.sh.in (dlname): Distinguish between missing
+ `-export-dynamic' and when the library is only statically linked.
+
+1997-04-21 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Trivial port to OpenBSD by making it an alias for
+ NetBSD. From Tim Pierce.
+
+1997-04-16 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Temporary measures to check for a broken collect2
+ program. Right now, we just see if we're using GCC on AIX 3.
+
+1997-04-13 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (mode): Use `egrep -e' when inferring the operation
+ mode.
+
+1997-04-12 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in (linker): Some GNU ld's don't accept `--version',
+ but do accept `-v'. From Jukka Honkela.
+ (ld_shlibs): AIX lossage may be settling down. AIX 3.2.5 ld does
+ *not* hardcode direct libraries, but AIX 4.1.[45] ld does.
+
+1997-04-07 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in (hardcode_action): Fix silly logic error. From
+ Bruno Haible.
+
+1997-04-05 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (install): Relink if hardcode_action is `relink',
+ rather than using complex conditionals based on the other
+ hardcode variables.
+
+ * ltconfig.in (hardcode_action): Set to `relink', not `immediate',
+ if we can only hardcode existing directories. Rearrange
+ conditionals to make the intent clearer, otherwise this can be one
+ hellish piece of code for the already-dizzy libtool maintainer.
+
+1997-04-02 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * replfunc.m4: Delete from the distribution. Documentation now
+ describes how to set LTALLOCA and LTLIBOBJS in your own
+ configure.in.
+
+ * ltmain.sh.in (link): Make sure a libtool library only counts as
+ a shared library if its library_names are non-null.
+ Use timestamps for .lo's when PIC is turned off, rather than
+ symlinking to the real object. This helps invalid mixtures of PIC
+ and non-PIC to fail.
+
+1997-04-01 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * Makefile.am (EXTRA_DIST): Distribute libtool.prj.
+
+ * Shameless plug: Changed source code management system from CVS
+ to PRCS.
+
+ * libtool.scm: Initial Guile implementation of libtool.
+
+ * ltmain.sh.in: An unexpected inconsistency in my whole approach
+ to shared libraries has proven that libtool needs to be completely
+ rewritten if I'm going to give full shared library support for
+ platforms that don't use the GNU C library version 2 (which to my
+ knowledge currently only works on GNU Hurd and Linux/GNU systems).
+ Porting the GNU C library should not be difficult, though.
+
+ Platforms that don't have the dlopen(3) family of functions will
+ need to install GNU DLD version 4 in order to build any kind of
+ libraries at all. Unfortunately, DLD 4 won't be released for a
+ while, because I maintain it, and I'm too busy working on libtool.
+
+ I'll keep the old ltconfig/ltmain.sh implementation around for as
+ long as I can, and continue applying bug fixes, so that I'll have
+ a reasonable starting point for this new libtool implementation.
+
+ It looks like this implementation will be even more complex than
+ the original (pre-0.7) libtool. Initial estimates show that it
+ may be up to 3 times slower, and 5 times larger than libtool-0.9.
+ I'll probably have to rewrite it in Guile to get reasonable
+ performance, which will severely limit its portability for a
+ while.
+
+ That will also introduce a bootstrapping issue, since the next
+ release of Guile will use libtool to build shared libraries. So,
+ if users want to have shared Guile libraries, they will have to
+ configure Guile with `--disable-shared', compile it, install it,
+ then reconfigure Guile with `--enable-shared' and repeat.
+
+ I was hoping to get libtool 1.0 out the door by early April, but
+ now it looks like it will take at least another year before it'll
+ be usable by the public at large. April fools. libtool.scm
+ doesn't exist yet, either.
+
+ * ltconfig.in (verify_host): Remove redundant `Transform *-*-linux*
+ to *-*-linux-gnu*'. From Bruno Haible.
+
+1997-03-31 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * Makefile.am: Use the new AUTOMAKE and ACLOCAL variables.
+
+ * ltmain.sh.in (link): Only fail if a convenience library doesn't
+ exist, and the user specified -whole-archive.
+ Fix shell quoting that was breaking @OUTPUT@ substitution.
+
+1997-03-28 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Use the hardcode_libdir_separator.
+ Convenience libraries are libtool objects if we're not building
+ libtool libs.
+
+ * ltconfig.in (hardcode_libdir_separator): Added in case the
+ linker only honours the last of the -rpath flags (but it can
+ contain multiple colon-separated directories), such as on OSF/1.
+ Reported by Carl D. Roth.
+
+ * ltmain.sh.in (link): Set the dlname if -export-dynamic is given.
+ (install, uninstall): Handle the dlname file separately.
+
+ * ltconfig.in (export_dynamic_flag): Added to allow programs to
+ use reflexive dlopens.
+
+ * ltmain.sh.in: Include the mode name in any help messages.
+ (dlname): New mode to give the name to be used with dlopen(3).
+
+ * ltconfig.in (AR): Allow AR to be set by the user, and export it
+ to ltmain.sh.
+
+ * ltmain.sh.in: Remove broken profiled library support.
+ Added `-whole-archive' and `-no-whole-archive' to manipulate
+ convenience libraries.
+
+1997-03-27 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Allow the creation of static convenience
+ libraries made of libtool objects. Suggested by David
+ Mosberger-Tang.
+
+1997-03-25 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: On AIX, libtool also needs to look for `B' symbols
+ in nm output. These are global variable definitions.
+
+ * ltmain.sh.in: Linking with -static should link against the
+ linklib if old_library is empty (like it is on AIX).
+
+ * ltconfig.in: Change the order of OS detection, so that
+ linux-gnu* is detected before gnu*.
+
+ * Makefile.am (libtool): Use the correct CC, RANLIB, LD, when
+ generating libtool. From Carl D. Roth.
+
+ * configure.in: Find out the user-supplied CC, LD, RANLIB. From
+ Carl D. Roth.
+
+1997-03-24 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in: Linking with -static should link against the old
+ library, not linklib.
+
+ * README-automake: Updated to point to Automake 1.1m.
+
+1997-03-15 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * demo/main.c: Use it.
+
+ * demo/foo.h: Declare it.
+
+ * demo/foo.c: Added definition of `nothing' so that we have an
+ global variable definition, as well as functions.
+
+1997-03-12 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Make sure either enable_shared or enable_static is
+ configured. Reported by Tom Tromey.
+
+ * ltmain.sh.in: Bomb out if no library types are configured.
+
+1997-02-22 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in, ltmain.sh.in (hardcode_libdir_flag_spec): Renamed
+ from `hardcode_libdir_flag'.
+ (library_names_spec): Renamed from `lib_names'.
+
+ * ltconfig.in, ltmain.sh.in (hardcode_action): Change value from
+ `rpath' to `immediate'.
+
+ * replfunc.m4: Add AM_FUNC_ALLOCA, AM_FUNC_MEMCMP, and
+ AM_STRUCT_ST_BLOCKS.
+
+1997-02-18 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Transform *-*-linux* to *-*-linux-gnu* to support
+ old-style config.guess scripts.
+
+1997-02-17 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in: Create objdir *before* linking a program into it.
+
+1997-02-12 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Any ld --version that returns GNU is probably a GNU
+ ld. From Marcus Daniels.
+
+ * libtool.m4: Added AM_REPLACE_FUNCS.
+
+1997-02-11 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Trivial port to *-*-osf4. From Bruno Haible.
+
+1997-02-10 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: AIX 3 and 4 ld only hardcodes LIBPATH if -L is not
+ specified. This behaviour is the same with both xlc and gcc.
+
+1997-02-07 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * doc/platforms.texi: Yaay! We found a workaround for HP-UX
+ /bin/sh buffer overflows. From Eric Backus.
+
+1997-02-03 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * Release 0.9.
+
+ * PLATFORMS, doc/platforms.texi, Makefile.am, doc/Makefile.am:
+ Move PLATFORMS to doc/platforms.texi.
+
+ * ltmain.sh.in (link): Use hardcode_libdir_flag to get a library
+ directory into the resulting binary.
+ Use hardcode_action, and make many simplifying changes to have
+ compilation and finalization be consistent with each other.
+
+ * ltconfig.in: Not so amazing! It's AIX cc that hardcodes direct
+ libraries... gcc doesn't, though.
+ (link_rpath_flag): Change link_rpath_flag to be
+ hardcode_libdir_flag.
+ (hardcode_action): New variable to simplify ltmain.sh.
+
+1997-01-29 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in: Change to take advantage of linkers that don't
+ hardcode direct libraries.
+
+ * ltconfig.in: Amazing! AIX 3 linker doesn't hardcode direct
+ libraries, which makes it less buggy than AIX 4. Reported by Mark
+ Kettenis.
+
+ * demo/configure.in: Check for the math library.
+
+ * demo/foo.c (foo): Change to use the `cos' function, so that we
+ need to link against another library.
+
+1997-01-28 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Export the PATH variable in order to find
+ the program, rather than giving a full path. This helps give the
+ program a less confusing value for argv[0].
+
+1997-01-26 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * Release 0.8.
+
+1997-01-24 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * Makefile.am (demo_distfiles): Add demo/acinclude.m4 to the
+ distribution.
+
+1997-01-22 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * libtool.m4: For IRIX 6, ld needs -n32 if cc uses it. Reported
+ by Bruno Haible.
+
+ * ltconfig.in: IRIX ld does not hardcode direct libraries.
+ Reported by Bruno Haible.
+
+1997-01-18 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in, ltmain.sh.in (hardcode_shlibpath_var): Allow new
+ value, `unsupported', since most linkers do not allow you to use
+ shlibpath_var for initial linking.
+
+ * ltconfig.in: Lots of bug fixes from Bruno Haible. Set wl on
+ OSF/1, fix definitions of hardcode_* variables.
+ (archive_cmds): Fix not to use +h on HP-UX 9.x. Reported by Bruno
+ Haible.
+
+1997-01-17 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * libtoolize.in: Handle explicit AC_CONFIG_AUX_DIR settings.
+ Suggested by Akim Demaille.
+
+ * libtool.m4: Change ltconfig line to use $CONFIG_SHELL when it is
+ specified. Reported by Bruno Haible.
+
+1997-01-16 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * demo/Makefile.am (hc-direct): Do better searching for the proper
+ name to do a direct link.
+ (hc-libpath): Make allowances if shlibpath_var cannot be used
+ to find libraries at link time, such as on AIX.
+
+ * Makefile.am (demo_distfiles): Remove ansi2knr.1 and ansi2knr.c.
+
+ * demo/foo.c, demo/hello.c, demo/main.c: Change ANSI prototypes to
+ KNR form, for better portability, and less ansi2knr hair.
+
+ * demo/configure.in: Remove AM_FUNC_PROTOTYPES.
+
+ * demo/Makefile.am: Remove ansi2knr from the AUTOMAKE_OPTIONS.
+
+ * demo/ansi2knr.1, demo/ansi2knr.c: Removed these files.
+
+ * ltmain.sh.in: Use 1>&2 consistently to direct errors and
+ warnings to stderr.
+ (compile): Fix missing single quote.
+
+ * ltconfig.in (hardcode_direct): On Solaris at least, using
+ DIR/libNAME.so does not hardcode DIR, so introduce a new hardcode
+ variable to reflect that.
+
+ * ltmain.sh.in (link): If linking with $link_static_flag fails,
+ then retry without it, but still use the .a versions of
+ uninstalled libtool archives.
+
+1997-01-15 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Eval $link_static_flag. Reported by Bruno
+ Haible.
+
+ * PLATFORMS: Add to distribution. Suggested by Bruno Haible.
+
+1997-01-13 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Add support for SCO OpenServer 5.x. From
+ Christopher Olsen.
+
+ (can_build_shared): Initialize at the top of the file, so that
+ shared libraries aren't built on platforms that don't support
+ them.
+
+1997-01-11 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in, ltconfig.in, libtoolize.in, doc/libtool.texi:
+ Update the copyright completion years.
+
+1997-01-08 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Port to IRIX 5.3, 6.2.
+
+1997-01-06 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: HP-UX 9 support is the same as HP-UX 10, so the
+ port is trivial.
+
+ * libtoolize.in: Add --dry-run option, -n for short.
+
+1997-01-03 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): On at least SunOS, /bin/sh doesn't
+ understand "export something=val". From Bruno Haible.
+
+1997-01-02 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (compile): Recognize valid source file suffixes for
+ Fortran and C++.
+
+1996-12-17 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Don't allow *._o and *.l_o to be valid
+ object type suffixes, in spite of Automake's current ansi2knr
+ implementation. Not all compilers allow non-`.o' suffixes.
+
+1996-12-16 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Delete the `libtool' version type.
+
+1996-12-12 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Use the full autoconf syntax when checking for GNU
+ C. Delete library stripping program, until we have a correct
+ test.
+
+1996-12-11 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: On AIX 3, use /usr/ucb/nm, not /ucb/nm. From Mark
+ Kettenis.
+
+1996-12-09 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ Reported by Charles Kerr:
+ * doc/libtool.texi (Creating Object Files): Doc fix independant ->
+ independent.
+
+ * ltconfig.in (ld_shlibs): SunOS 4 doesn't support shared library
+ dependencies.
+
+1996-12-08 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * Release 0.7.
+
+ * Makefile.am (EXTRA_DIST): Add README-automake to the
+ distribution.
+
+ * ltmain.sh.in (link): When linking libtool libraries, use
+ standard objects if they are PIC. This prevents spurious warnings
+ about invalid suffixes on AIX.
+
+ * demo/Makefile.am: Rename libhell to libhello, so that we're not
+ quite as offensive.
+
+ * ltconfig.in: Remove unnecessary host validity checking.
+
+ * ltmain.sh.in: Don't force people to use libNAME.la: SOMETHING.la
+ is good enough (for consistency with *.a handling).
+
+1996-12-07 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Accept files ending in .a as standard
+ object files. Reported by Ulrich Drepper.
+ Remove support for creating profiled libraries (for now).
+ Transform all library objects into standard objects when linking a
+ program.
+
+ * ltconfig.in (thisdir): How embarrassing! An error in the regexp
+ for finding the directory component of the script path.
+
+1996-12-05 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (compile): Support `.S' (preprocessed assembler)
+ files. Reported by Anthony Green.
+
+ * libtoolize.in: Give clearer instrutions for how to update
+ aclocal.m4.
+
+ * ltconfig.in, ltmain.sh.in (link): Add support for creating
+ reloadable objects.
+
+1996-12-04 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (install): Fix passing -n flag to `libtool
+ --finish'.
+ (compile): Compile `.lo' and `.o' objects at the same time so that
+ non-PIC objects (if they are available) can be used for linking
+ into programs and creating static archives. Suggested by Ulrich
+ Drepper.
+
+1996-12-03 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (link): Give the full path to the libtool library
+ when sourcing it.
+
+ * ltconfig.in (old_striplib): Do a configuration test to determine
+ if old-style libraries actually can be stripped or not.
+
+1996-12-02 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Delete reference to ABOUT-LIBS.
+
+ * tests: Added new subdirectory.
+
+ * doc/libtool.texi: Doc fixes, and finished up the Configuring
+ chapter.
+
+ * ltmain.sh.in (link): Allow *._o and *.l_o to be valid object
+ file suffixes, for Automake's ansi2knr implementation.
+ New option -version-info replaces -version-file.
+
+ [help]: Give a pointer to mode-specific help when appropriate.
+
+ * ltconfig.in: Changed messages to correspond to AM_PROG_CC_STDC.
+
+ * demo: Also test Automake's ansi2knr support.
+
+1996-11-19 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Bug fixes for AIX 4, and for static platforms.
+
+ * ltmain.sh.in (install): Fix for loops over arguments.
+ Need to quote ${IFS= } -> "${IFS= }".
+ (link): Fix soname_spec bug. Create objdir whether or not we have
+ shared libraries.
+
+ * ltconfig.in: Check for library stripping program.
+ Use test -f instead of test -e.
+
+1996-11-18 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltconfig.in: Don't run the RANLIB test unless RANLIB wasn't
+ set.
+ Be verbose about the environment variables we were configured
+ with.
+
+ * ltmain.sh.in (objdir): change to .libs.
+
+1996-11-16 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in (install): Just plunge ahead with the
+ installation... don't try to enforce dependencies.
+
+1996-11-15 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh.in: Fix up $libdir to be $dest in install mode.
+
+1996-11-10 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * ltmain.sh: Finished rewrite of compile, link, and install
+ modes.
+
+ * New ChangeLog file for libtool-0.7, since I've totally rewritten
+ libtool.
+
+1996-03-15 Gordon Matzigkeit <gord@gnu.ai.mit.edu>
+
+ * For historical reasons: this is when I started writing libtool.
projects / thirdparty / libtool.git / commitdiff
