net: phy: realtek: add dummy PHY driver for RTL8127ATF

RTL8127ATF supports a SFP+ port for fiber modules (10GBASE-SR/LR/ER/ZR and
DAC). The list of supported modes was provided by Realtek. According to the
r8127 vendor driver also 1G modules are supported, but this needs some more
complexity in the driver, and only 10G mode has been tested so far.
Therefore mainline support will be limited to 10G for now.
The SFP port signals are hidden in the chip IP and driven by firmware.
Therefore mainline SFP support can't be used here.
This PHY driver is used by the RTL8127ATF support in r8169.
RTL8127ATF reports the same PHY ID as the TP version. Therefore use a dummy
PHY ID.  This PHY driver is used by the RTL8127ATF support in r8169.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/e3d55162-210a-4fab-9abf-99c6954eee10@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/MAINTAINERS b/MAINTAINERS
index 12c03e61526b1b14ecad7a214f13606071e5aa73..6348b87b7600e50603338e000f3cb6421b816231 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9417,6 +9417,7 @@ F:        include/linux/phy_link_topology.h
 F:     include/linux/phylib_stubs.h
 F:     include/linux/platform_data/mdio-bcm-unimac.h
 F:     include/linux/platform_data/mdio-gpio.h
+F:     include/net/phy/
 F:     include/trace/events/mdio.h
 F:     include/uapi/linux/mdio.h
 F:     include/uapi/linux/mii.h

diff --git a/drivers/net/phy/realtek/realtek_main.c b/drivers/net/phy/realtek/realtek_main.c
index eb5b540ada0e59a86775f4eb2f66218ff20bf567..5a7f472bf58e18a2506ca377fd6073e2f4ebec98 100644 (file)
--- a/drivers/net/phy/realtek/realtek_main.c
+++ b/drivers/net/phy/realtek/realtek_main.c
@@ -17,6 +17,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/string_choices.h>
+#include <net/phy/realtek_phy.h>
 
 #include "../phylib.h"
 #include "realtek.h"
@@ -2100,6 +2101,45 @@ static irqreturn_t rtl8221b_handle_interrupt(struct phy_device *phydev)
        return IRQ_HANDLED;
 }
 
+static int rtlgen_sfp_get_features(struct phy_device *phydev)
+{
+       linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+                        phydev->supported);
+
+       /* set default mode */
+       phydev->speed = SPEED_10000;
+       phydev->duplex = DUPLEX_FULL;
+
+       phydev->port = PORT_FIBRE;
+
+       return 0;
+}
+
+static int rtlgen_sfp_read_status(struct phy_device *phydev)
+{
+       int val, err;
+
+       err = genphy_update_link(phydev);
+       if (err)
+               return err;
+
+       if (!phydev->link)
+               return 0;
+
+       val = rtlgen_read_vend2(phydev, RTL_VND2_PHYSR);
+       if (val < 0)
+               return val;
+
+       rtlgen_decode_physr(phydev, val);
+
+       return 0;
+}
+
+static int rtlgen_sfp_config_aneg(struct phy_device *phydev)
+{
+       return 0;
+}
+
 static struct phy_driver realtek_drvs[] = {
        {
                PHY_ID_MATCH_EXACT(0x00008201),
@@ -2361,6 +2401,20 @@ static struct phy_driver realtek_drvs[] = {
                .write_page     = rtl821x_write_page,
                .read_mmd       = rtl822x_read_mmd,
                .write_mmd      = rtl822x_write_mmd,
+       }, {
+               PHY_ID_MATCH_EXACT(PHY_ID_RTL_DUMMY_SFP),
+               .name           = "Realtek SFP PHY Mode",
+               .flags          = PHY_IS_INTERNAL,
+               .probe          = rtl822x_probe,
+               .get_features   = rtlgen_sfp_get_features,
+               .config_aneg    = rtlgen_sfp_config_aneg,
+               .read_status    = rtlgen_sfp_read_status,
+               .suspend        = genphy_suspend,
+               .resume         = rtlgen_resume,
+               .read_page      = rtl821x_read_page,
+               .write_page     = rtl821x_write_page,
+               .read_mmd       = rtl822x_read_mmd,
+               .write_mmd      = rtl822x_write_mmd,
        }, {
                PHY_ID_MATCH_EXACT(0x001ccad0),
                .name           = "RTL8224 2.5Gbps PHY",

diff --git a/include/net/phy/realtek_phy.h b/include/net/phy/realtek_phy.h
new file mode 100644 (file)
index 0000000..d683bc1
--- /dev/null
+++ b/include/net/phy/realtek_phy.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _REALTEK_PHY_H
+#define _REALTEK_PHY_H
+
+#define        PHY_ID_RTL_DUMMY_SFP    0x001ccbff
+
+#endif /* _REALTEK_PHY_H */