dt-bindings: net: nxp,s32-dwmac: Declare per-queue interrupts

The DWMAC IP on NXP S32G/R SoCs has connected queue-based IRQ lines,
set them to allow using Multi-IRQ mode.

Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Link: https://patch.msgid.link/20260313-dwmac_multi_irq-v12-3-b5c9d0aa13d6@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

diff --git a/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml b/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml
index 1b2934f3c87ca21ec67369fc34b3234cc3d9d60c..753a04941659b82b655dad1439ff66f8b37fa18b 100644 (file)
--- a/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,s32-dwmac.yaml
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-# Copyright 2021-2024 NXP
+# Copyright 2021-2026 NXP
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/net/nxp,s32-dwmac.yaml#
@@ -16,6 +16,8 @@ description:
   the SoC S32R45 has two instances. The devices can use RGMII/RMII/MII
   interface over Pinctrl device or the output can be routed
   to the embedded SerDes for SGMII connectivity.
+  The DWMAC instances have connected all RX/TX queues interrupts,
+  enabling load balancing of data traffic across all CPU cores.
 
 properties:
   compatible:
@@ -45,10 +47,25 @@ properties:
       FlexTimer Modules connect to GMAC_0.
 
   interrupts:
-    maxItems: 1
+    minItems: 1
+    maxItems: 11
 
   interrupt-names:
-    const: macirq
+    oneOf:
+      - items:
+          - const: macirq
+      - items:
+          - const: macirq
+          - const: tx-queue-0
+          - const: rx-queue-0
+          - const: tx-queue-1
+          - const: rx-queue-1
+          - const: tx-queue-2
+          - const: rx-queue-2
+          - const: tx-queue-3
+          - const: rx-queue-3
+          - const: tx-queue-4
+          - const: rx-queue-4
 
   clocks:
     items:
@@ -88,8 +105,28 @@ examples:
               <0x0 0x4007c004 0x0 0x4>;    /* GMAC_0_CTRL_STS */
         nxp,phy-sel = <&gpr 0x4>;
         interrupt-parent = <&gic>;
-        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-        interrupt-names = "macirq";
+        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                     /* CHN 0: tx, rx */
+                     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                     /* CHN 1: tx, rx */
+                     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+                     /* CHN 2: tx, rx */
+                     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+                     /* CHN 3: tx, rx */
+                     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+                     /* CHN 4: tx, rx */
+                     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "macirq",
+                          "tx-queue-0", "rx-queue-0",
+                          "tx-queue-1", "rx-queue-1",
+                          "tx-queue-2", "rx-queue-2",
+                          "tx-queue-3", "rx-queue-3",
+                          "tx-queue-4", "rx-queue-4";
         snps,mtl-rx-config = <&mtl_rx_setup>;
         snps,mtl-tx-config = <&mtl_tx_setup>;
         clocks = <&clks 24>, <&clks 17>, <&clks 16>, <&clks 15>;