arm64: dts: qcom: sm8750-mtp: move PCIe GPIOs to pcieport0 node

Relocate the wake-gpios and perst-gpios properties from the pcie0
controller node to the pcieport0 node. These GPIOs are associated with
the PCIe root port and should reside under the pcieport0 node.

Also rename perst-gpios to reset-gpios to match the expected property name
in the PCIe port node.

Fixes: 141714e163bb ("arm64: dts: qcom: sm8750-mtp: Add WiFi and Bluetooth")
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20251008-sm8750-v1-1-daeadfcae980@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 3bbb53b7c71f3c03faee02fc282fbe4bba9b0a0f..45b5f758156700bf916c4122c93092c68488c1aa 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -960,9 +960,6 @@
 };
 
 &pcie0 {
-       wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
-       perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
-
        pinctrl-0 = <&pcie0_default_state>;
        pinctrl-names = "default";
 
@@ -977,6 +974,9 @@
 };
 
 &pcieport0 {
+       wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+       reset-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+
        wifi@0 {
                compatible = "pci17cb,1107";
                reg = <0x10000 0x0 0x0 0x0 0x0>;