# Jeff Hedlund <jeff.hedlund@matrixsi.com>
# Frédéric Buclin <LpSolit@gmail.com>
+# Implementation notes for this file:
+#
+# 1) the 'id' form parameter is validated early on, and if it is not a valid
+# bugid an error will be reported, so it is OK for later code to simply check
+# for a defined form 'id' value, and it can assume a valid bugid.
+#
+# 2) If the 'id' form parameter is not defined (after the initial validation),
+# then we are processing multiple bugs, and @idlist will contain the ids.
+#
+# 3) If we are processing just the one id, then it is stored in @idlist for
+# later processing.
+
use strict;
my $UserInEditGroupSet = -1;
# For each bug being modified, make sure its ID is a valid bug number
# representing an existing bug that the user is authorized to access.
my @idlist;
-if (defined $::FORM{'id'}) {
- ValidateBugID($::FORM{'id'});
- push @idlist, $::FORM{'id'};
+if (defined $cgi->param('id')) {
+ my $id = $cgi->param('id');
+ ValidateBugID($id);
+
+ # Store the validated, and detainted id back in the cgi data, as
+ # lots of later code will need it, and will obtain it from there
+ $cgi->param('id', $id);
+ push @idlist, $id;
} else {
- foreach my $i (keys %::FORM) {
+ foreach my $i ($cgi->param()) {
if ($i =~ /^id_([1-9][0-9]*)/) {
my $id = $1;
ValidateBugID($id);
# Make sure there are bugs to process.
scalar(@idlist) || ThrowUserError("no_bugs_chosen");
-$::FORM{'dontchange'} = '' unless exists $::FORM{'dontchange'};
+# Make sure form param 'dontchange' is defined so it can be compared to easily.
+$cgi->param('dontchange','') unless defined $cgi->param('dontchange');
# Validate all timetracking fields
foreach my $field ("estimated_time", "work_time", "remaining_time") {
- if (defined $::FORM{$field}) {
- my $er_time = trim($::FORM{$field});
- if ($er_time ne $::FORM{'dontchange'}) {
+ if (defined $cgi->param($field)) {
+ my $er_time = trim($cgi->param($field));
+ if ($er_time ne $cgi->param('dontchange')) {
Bugzilla::Bug::ValidateTime($er_time, $field);
}
}
}
if (UserInGroup(Param('timetrackinggroup'))) {
- my $wk_time = $::FORM{'work_time'};
- if ($::FORM{'comment'} =~ /^\s*$/ && $wk_time && $wk_time != 0) {
+ my $wk_time = $cgi->param('work_time');
+ if ($cgi->param('comment') =~ /^\s*$/ && $wk_time && $wk_time != 0) {
ThrowUserError('comment_required');
}
}
-ValidateComment($::FORM{'comment'});
+ValidateComment(scalar $cgi->param('comment'));
# If the bug(s) being modified have dependencies, validate them
# and rebuild the list with the validated values. This is important
# is a bug alias that gets converted to its corresponding bug ID
# during validation.
foreach my $field ("dependson", "blocked") {
- if (defined($::FORM{$field}) && $::FORM{$field} ne "") {
+ if (defined $cgi->param($field) && $cgi->param($field) ne "") {
my @validvalues;
- foreach my $id (split(/[\s,]+/, $::FORM{$field})) {
+ foreach my $id (split(/[\s,]+/, $cgi->param($field))) {
next unless $id;
ValidateBugID($id, $field);
push(@validvalues, $id);
}
- $::FORM{$field} = join(",", @validvalues);
+ $cgi->param($field, join(",", @validvalues));
}
}
});
# Validate flags, but only if the user is changing a single bug,
# since the multi-change form doesn't include flag changes.
-if (defined $::FORM{'id'}) {
- Bugzilla::Flag::validate($cgi, $::FORM{'id'});
- Bugzilla::FlagType::validate($cgi, $::FORM{'id'});
+if (defined $cgi->param('id')) {
+ Bugzilla::Flag::validate($cgi, $cgi->param('id'));
+ Bugzilla::FlagType::validate($cgi, $cgi->param('id'));
}
######################################################################
# Set the title if we can see a mid-air coming. This test may have false
# negatives, but never false positives, and should catch the majority of cases.
# It only works at all in the single bug case.
-if (defined($::FORM{'id'})) {
- SendSQL("SELECT delta_ts FROM bugs WHERE bug_id = $::FORM{'id'}");
+if (defined $cgi->param('id')) {
+ SendSQL("SELECT delta_ts FROM bugs WHERE bug_id = " .
+ $cgi->param('id'));
my $delta_ts = FetchOneColumn();
- if (defined $::FORM{'delta_ts'} && $delta_ts &&
- $::FORM{'delta_ts'} ne $delta_ts)
+ if (defined $cgi->param('delta_ts') && $cgi->param('delta_ts') ne $delta_ts)
{
$vars->{'title_tag'} = "mid_air";
}
# Set up the vars for nagiavtional <link> elements
my $next_bug;
-if ($cgi->cookie("BUGLIST") && $::FORM{'id'}) {
+if ($cgi->cookie("BUGLIST") && defined $cgi->param('id')) {
my @bug_list = split(/:/, $cgi->cookie("BUGLIST"));
$vars->{'bug_list'} = \@bug_list;
- my $cur = lsearch(\@bug_list, $::FORM{"id"});
+ my $cur = lsearch(\@bug_list, $cgi->param("id"));
if ($cur >= 0 && $cur < $#bug_list) {
$next_bug = $bug_list[$cur + 1];
$ret = 0 unless ( defined( $ret ));
if( $ret ) {
- if (!defined $::FORM{'comment'} || $::FORM{'comment'} =~ /^\s*$/) {
+ if (!defined $cgi->param('comment')
+ || $cgi->param('comment') =~ /^\s*$/) {
# No comment - sorry, action not allowed !
ThrowUserError("comment_required");
} else {
# user is changing a single bug and has changed the bug's product),
# and make the user verify the version, component, target milestone,
# and bug groups if so.
-if ( $::FORM{'id'} ) {
+my $oldproduct = '';
+if (defined $cgi->param('id')) {
SendSQL("SELECT name FROM products INNER JOIN bugs " .
- "ON products.id = bugs.product_id WHERE bug_id = $::FORM{'id'}");
- $::oldproduct = FetchSQLData();
+ "ON products.id = bugs.product_id WHERE bug_id = " .
+ $cgi->param('id'));
+ $oldproduct = FetchSQLData();
}
-if ((($::FORM{'id'} && $::FORM{'product'} ne $::oldproduct)
- || (!$::FORM{'id'} && $::FORM{'product'} ne $::FORM{'dontchange'}))
+
+if (((defined $cgi->param('id') && $cgi->param('product') ne $oldproduct)
+ || (!$cgi->param('id')
+ && $cgi->param('product') ne $cgi->param('dontchange')))
&& CheckonComment( "reassignbycomponent" ))
{
# Check to make sure they actually have the right to change the product
- if (!CheckCanChangeField('product', $::FORM{'id'}, $::oldproduct, $::FORM{'product'})) {
- $vars->{'oldvalue'} = $::oldproduct;
- $vars->{'newvalue'} = $::FORM{'product'};
+ if (!CheckCanChangeField('product', $cgi->param('id'), $oldproduct,
+ $cgi->param('product'))) {
+ $vars->{'oldvalue'} = $oldproduct;
+ $vars->{'newvalue'} = $cgi->param('product');
$vars->{'field'} = 'product';
$vars->{'privs'} = $PrivilegesRequired;
ThrowUserError("illegal_change", $vars);
}
-
+
CheckFormField($cgi, 'product', \@::legal_product);
- my $prod = $::FORM{'product'};
+ my $prod = $cgi->param('product');
# note that when this script is called from buglist.cgi (rather
# than show_bug.cgi), it's possible that the product will be changed
# pretty weird case, and not terribly unreasonable behavior, but
# worthy of a comment, perhaps.
#
- my $vok = lsearch($::versions{$prod}, $::FORM{'version'}) >= 0;
- my $cok = lsearch($::components{$prod}, $::FORM{'component'}) >= 0;
+ my $vok = lsearch($::versions{$prod}, $cgi->param('version')) >= 0;
+ my $cok = lsearch($::components{$prod}, $cgi->param('component')) >= 0;
my $mok = 1; # so it won't affect the 'if' statement if milestones aren't used
if ( Param("usetargetmilestone") ) {
CheckFormFieldDefined($cgi, 'target_milestone');
- $mok = lsearch($::target_milestone{$prod}, $::FORM{'target_milestone'}) >= 0;
+ $mok = lsearch($::target_milestone{$prod},
+ $cgi->param('target_milestone')) >= 0;
}
# If the product-specific fields need to be verified, or we need to verify
# whether or not to add the bugs to their new product's group, display
# a verification form.
- if (!$vok || !$cok || !$mok || (AnyDefaultGroups() && !defined($::FORM{'addtonewgroup'}))) {
- $vars->{'form'} = \%::FORM;
- $vars->{'mform'} = \%::MFORM;
+ if (!$vok || !$cok || !$mok || (AnyDefaultGroups()
+ && !defined $cgi->param('addtonewgroup'))) {
if (!$vok || !$cok || !$mok) {
$vars->{'verify_fields'} = 1;
# thats appropriate
$vars->{'versions'} = $::versions{$prod};
if ($vok) {
- $defaults{'version'} = $::FORM{'version'};
+ $defaults{'version'} = $cgi->param('version');
}
$vars->{'components'} = $::components{$prod};
if ($cok) {
- $defaults{'component'} = $::FORM{'component'};
+ $defaults{'component'} = $cgi->param('component');
}
if (Param("usetargetmilestone")) {
$vars->{'use_target_milestone'} = 1;
$vars->{'milestones'} = $::target_milestone{$prod};
if ($mok) {
- $defaults{'target_milestone'} = $::FORM{'target_milestone'};
+ $defaults{'target_milestone'} = $cgi->param('target_milestone');
} else {
SendSQL("SELECT defaultmilestone FROM products " .
"WHERE name = " . SqlQuote($prod));
}
$vars->{'verify_bug_group'} = (AnyDefaultGroups()
- && !defined($::FORM{'addtonewgroup'}));
+ && !defined $cgi->param('addtonewgroup'));
$template->process("bug/process/verify-new-product.html.tmpl", $vars)
|| ThrowTemplateError($template->error());
# Ignore the assigned_to field if the bug is not being reassigned
if ($field eq "assigned_to"
- && $::FORM{'knob'} ne "reassignbycomponent"
- && $::FORM{'knob'} ne "reassign")
+ && $cgi->param('knob') ne "reassignbycomponent"
+ && $cgi->param('knob') ne "reassign")
{
return 1;
}
# Confirm that the reporter of the current bug can access the bug we are duping to.
sub DuplicateUserConfirm {
# if we've already been through here, then exit
- if (defined $::FORM{'confirm_add_duplicate'}) {
+ if (defined $cgi->param('confirm_add_duplicate')) {
return;
}
- my $dupe = $::FORM{'id'};
- my $original = $::FORM{'dup_id'};
+ # Remember that we validated both these ids earlier, so we know
+ # they are both valid bug ids
+ my $dupe = $cgi->param('id');
+ my $original = $cgi->param('dup_id');
- SendSQL("SELECT reporter FROM bugs WHERE bug_id = " . SqlQuote($dupe));
+ SendSQL("SELECT reporter FROM bugs WHERE bug_id = $dupe");
my $reporter = FetchOneColumn();
my $rep_user = Bugzilla::User->new($reporter);
if ($rep_user->can_see_bug($original)) {
- $::FORM{'confirm_add_duplicate'} = "1";
+ $cgi->param('confirm_add_duplicate', '1');
return;
}
# and the duper has not chosen whether or not to add to CC list, so let's
# ask the duper what he/she wants to do.
- $vars->{'form'} = \%::FORM;
- $vars->{'mform'} = \%::MFORM;
$vars->{'original_bug_id'} = $original;
$vars->{'duplicate_bug_id'} = $dupe;
exit;
}
-if (defined $::FORM{'id'}) {
+if (defined $cgi->param('id')) {
# since this means that we were called from show_bug.cgi, now is a good
# time to do a whole bunch of error checking that can't easily happen when
# we've been called from buglist.cgi, because buglist.cgi only tweaks
#
CheckFormField($cgi, 'product', \@::legal_product);
CheckFormField($cgi, 'component',
- \@{$::components{$::FORM{'product'}}});
- CheckFormField($cgi, 'version',
- \@{$::versions{$::FORM{'product'}}});
+ \@{$::components{$cgi->param('product')}});
+ CheckFormField($cgi, 'version', \@{$::versions{$cgi->param('product')}});
if ( Param("usetargetmilestone") ) {
CheckFormField($cgi, 'target_milestone',
- \@{$::target_milestone{$::FORM{'product'}}});
+ \@{$::target_milestone{$cgi->param('product')}});
}
CheckFormField($cgi, 'rep_platform', \@::legal_platform);
CheckFormField($cgi, 'op_sys', \@::legal_opsys);
CheckFormFieldDefined($cgi, 'short_desc');
CheckFormFieldDefined($cgi, 'longdesclength');
- if (trim($::FORM{'short_desc'}) eq "") {
+ if (trim($cgi->param('short_desc')) eq "") {
ThrowUserError("require_summary");
}
}
my $action = '';
-if (defined $::FORM{action}) {
- $action = trim($::FORM{action});
+if (defined $cgi->param('action')) {
+ $action = trim($cgi->param('action'));
}
if (Param("move-enabled") && $action eq Param("move-button-text")) {
$cgi->param('buglist', join (":", @idlist));
sub _remove_remaining_time {
if (UserInGroup(Param('timetrackinggroup'))) {
- if ( defined $::FORM{'remaining_time'}
- && $::FORM{'remaining_time'} > 0 )
+ if ( defined $cgi->param('remaining_time')
+ && $cgi->param('remaining_time') > 0 )
{
- $::FORM{'remaining_time'} = 0;
+ $cgi->param('remaining_time', 0);
$vars->{'message'} = "remaining_time_zeroed";
}
}
}
sub DoConfirm {
- if (CheckCanChangeField("canconfirm", $::FORM{'id'}, 0, 1)) {
+ if (CheckCanChangeField("canconfirm", $cgi->param('id'), 0, 1)) {
DoComma();
$::query .= "everconfirmed = 1";
}
}
-
sub ChangeStatus {
my ($str) = (@_);
- if (!$::FORM{'dontchange'} ||
- ($str ne $::FORM{'dontchange'})) {
+ if (!$cgi->param('dontchange')
+ || $str ne $cgi->param('dontchange')) {
DoComma();
- if ($::FORM{knob} eq 'reopen') {
+ if ($cgi->param('knob') eq 'reopen') {
# When reopening, we need to check whether the bug was ever
# confirmed or not
$::query .= "bug_status = CASE WHEN everconfirmed = 1 THEN " .
# If bugs are reassigned and their status is "UNCONFIRMED", they
# should keep this status instead of "NEW" as suggested here.
# This point is checked for each bug later in the code.
- $::FORM{'bug_status'} = $str;
+ $cgi->param('bug_status', $str);
}
}
sub ChangeResolution {
my ($str) = (@_);
- if (!$::FORM{'dontchange'}
- || $str ne $::FORM{'dontchange'})
+ if (!$cgi->param('dontchange')
+ || $str ne $cgi->param('dontchange'))
{
DoComma();
$::query .= "resolution = " . SqlQuote($str);
# We define this variable here so that customized installations
# may set rules based on the resolution in CheckCanChangeField.
- $::FORM{'resolution'} = $str;
+ $cgi->param('resolution', $str);
}
}
# for single bug changes because non-checked checkboxes aren't present.
# All the checkboxes should be shown in that case, though, so its not
# an issue there
- if ($::FORM{'id'} || exists $::FORM{"bit-$b"}) {
- if (!$::FORM{"bit-$b"}) {
+ if (defined $cgi->param('id') || defined $cgi->param("bit-$b")) {
+ if (!$cgi->param("bit-$b")) {
push(@groupDel, $b);
- } elsif ($::FORM{"bit-$b"} == 1 && $isactive) {
+ } elsif ($cgi->param("bit-$b") == 1 && $isactive) {
push(@groupAdd, $b);
}
}
foreach my $field ("rep_platform", "priority", "bug_severity",
"bug_file_loc", "short_desc", "version", "op_sys",
"target_milestone", "status_whiteboard") {
- if (defined $::FORM{$field}) {
- if (!$::FORM{'dontchange'}
- || $::FORM{$field} ne $::FORM{'dontchange'}) {
+ if (defined $cgi->param($field)) {
+ if (!$cgi->param('dontchange')
+ || $cgi->param($field) ne $cgi->param('dontchange')) {
DoComma();
- $::query .= "$field = " . SqlQuote(trim($::FORM{$field}));
+ $::query .= "$field = " . SqlQuote(trim($cgi->param($field)));
}
}
}
my $prod_id; # Remember, can't use this for mass changes
-if ($::FORM{'product'} ne $::FORM{'dontchange'}) {
- $prod_id = get_product_id($::FORM{'product'});
+if ($cgi->param('product') ne $cgi->param('dontchange')) {
+ $prod_id = get_product_id($cgi->param('product'));
$prod_id ||
- ThrowUserError("invalid_product_name", {product => $::FORM{'product'}});
+ ThrowUserError("invalid_product_name",
+ {product => $cgi->param('product')});
DoComma();
$::query .= "product_id = $prod_id";
}
my $comp_id; # Remember, can't use this for mass changes
-if ($::FORM{'component'} ne $::FORM{'dontchange'}) {
+if ($cgi->param('component') ne $cgi->param('dontchange')) {
if (!defined $prod_id) {
ThrowUserError("no_component_change_for_multiple_products");
}
$comp_id = get_component_id($prod_id,
- $::FORM{'component'});
+ $cgi->param('component'));
$comp_id || ThrowCodeError("invalid_component",
- {name => $::FORM{'component'},
- product => $::FORM{'product'}});
+ {name => $cgi->param('component'),
+ product => $cgi->param('product')});
DoComma();
$::query .= "component_id = $comp_id";
# If this installation uses bug aliases, and the user is changing the alias,
# add this change to the query.
-if (Param("usebugaliases") && defined($::FORM{'alias'})) {
- my $alias = trim($::FORM{'alias'});
+if (Param("usebugaliases") && defined $cgi->param('alias')) {
+ my $alias = trim($cgi->param('alias'));
# Since aliases are unique (like bug numbers), they can only be changed
# for one bug at a time, so ignore the alias change unless only a single
# allowed the user to set whether or not the reporter
# and cc list can see the bug even if they are not members of all groups
# to which the bug is restricted.
-if ( $::FORM{'id'} ) {
- SendSQL("SELECT group_id FROM bug_group_map WHERE bug_id = $::FORM{'id'}");
+if (defined $cgi->param('id')) {
+ SendSQL("SELECT group_id FROM bug_group_map WHERE bug_id = " .
+ $cgi->param('id'));
my ($havegroup) = FetchSQLData();
if ( $havegroup ) {
DoComma();
- $::FORM{'reporter_accessible'} = $::FORM{'reporter_accessible'} ? '1' : '0';
- $::query .= "reporter_accessible = $::FORM{'reporter_accessible'}";
+ $cgi->param('reporter_accessible',
+ $cgi->param('reporter_accessible') ? '1' : '0');
+ $::query .= 'reporter_accessible = ' .
+ $cgi->param('reporter_accessible');
DoComma();
- $::FORM{'cclist_accessible'} = $::FORM{'cclist_accessible'} ? '1' : '0';
- $::query .= "cclist_accessible = $::FORM{'cclist_accessible'}";
+ $cgi->param('cclist_accessible',
+ $cgi->param('cclist_accessible') ? '1' : '0');
+ $::query .= 'cclist_accessible = ' . $cgi->param('cclist_accessible');
}
}
-if ($::FORM{'id'} &&
+if (defined $cgi->param('id') &&
(Param("insidergroup") && UserInGroup(Param("insidergroup")))) {
- detaint_natural($::FORM{'id'});
- foreach my $field (keys %::FORM) {
+
+ foreach my $field ($cgi->param()) {
if ($field =~ /when-([0-9]+)/) {
my $sequence = $1;
- my $private = $::FORM{"isprivate-$sequence"} ? 1 : 0 ;
- if ($private != $::FORM{"oisprivate-$sequence"}) {
- detaint_natural($::FORM{"$field"});
- SendSQL("UPDATE longdescs SET isprivate = $private
- WHERE bug_id = $::FORM{'id'} AND bug_when = " . $::FORM{"$field"});
+ my $private = $cgi->param("isprivate-$sequence") ? 1 : 0 ;
+ if ($private != $cgi->param("oisprivate-$sequence")) {
+ my $field_data = $cgi->param("$field");
+ detaint_natural($field_data);
+ SendSQL("UPDATE longdescs SET isprivate = $private " .
+ "WHERE bug_id = " . $cgi->param('id') .
+ " AND bug_when = $field_data");
}
}
# What we'll do here is formulate the CC data into two hashes of ID's involved
# in this CC change. Then those hashes can be used later on for the actual change.
my (%cc_add, %cc_remove);
-if (defined $::FORM{newcc} || defined $::FORM{'addselfcc'} || defined $::FORM{removecc} || defined $::FORM{masscc}) {
+if (defined $cgi->param('newcc')
+ || defined $cgi->param('addselfcc')
+ || defined $cgi->param('removecc')
+ || defined $cgi->param('masscc')) {
# If masscc is defined, then we came from buglist and need to either add or
# remove cc's... otherwise, we came from bugform and may need to do both.
my ($cc_add, $cc_remove) = "";
- if (defined $::FORM{masscc}) {
- if ($::FORM{ccaction} eq 'add') {
- $cc_add = $::FORM{masscc};
- } elsif ($::FORM{ccaction} eq 'remove') {
- $cc_remove = $::FORM{masscc};
+ if (defined $cgi->param('masscc')) {
+ if ($cgi->param('ccaction') eq 'add') {
+ $cc_add = join(' ',$cgi->param('masscc'));
+ } elsif ($cgi->param('ccaction') eq 'remove') {
+ $cc_remove = join(' ',$cgi->param('masscc'));
}
} else {
- $cc_add = $::FORM{newcc};
+ $cc_add = join(' ',$cgi->param('newcc'));
# We came from bug_form which uses a select box to determine what cc's
# need to be removed...
- if (defined $::FORM{removecc} && $::FORM{cc}) {
- $cc_remove = join (",", @{$::MFORM{cc}});
+ if (defined $cgi->param('removecc') && $cgi->param('cc')) {
+ $cc_remove = join (",", $cgi->param('cc'));
}
}
$cc_add{$pid} = $person;
}
}
- if ($::FORM{'addselfcc'}) {
+ if ($cgi->param('addselfcc')) {
$cc_add{$whoid} = $user->login;
}
if ($cc_remove) {
# Store the new assignee and QA contact IDs (if any). This is the
# only way to keep these informations when bugs are reassigned by
-# component as $::FORM{'assigned_to'} and $::FORM{'qa_contact'}
+# component as $cgi->param('assigned_to') and $cgi->param('qa_contact')
# are not the right fields to look at.
my $assignee;
my $qacontact;
-if (defined $::FORM{'qa_contact'}
- && $::FORM{'knob'} ne "reassignbycomponent")
+if (defined $cgi->param('qa_contact')
+ && $cgi->param('knob') ne "reassignbycomponent")
{
- my $name = trim($::FORM{'qa_contact'});
+ my $name = trim($cgi->param('qa_contact'));
# The QA contact cannot be deleted from show_bug.cgi for a single bug!
- if ($name ne $::FORM{'dontchange'}) {
+ if ($name ne $cgi->param('dontchange')) {
$qacontact = DBNameToIdAndCheck($name) if ($name ne "");
DoComma();
if($qacontact) {
}
CheckFormFieldDefined($cgi, 'knob');
-SWITCH: for ($::FORM{'knob'}) {
+SWITCH: for ($cgi->param('knob')) {
/^none$/ && do {
last SWITCH;
};
# don't resolve as fixed while still unresolved blocking bugs
if (Param("noresolveonopenblockers")
- && $::FORM{'resolution'} eq 'FIXED')
+ && $cgi->param('resolution') eq 'FIXED')
{
my @dependencies = Bugzilla::Bug::CountOpenDependencies(@idlist);
if (scalar @dependencies > 0) {
_remove_remaining_time();
ChangeStatus('RESOLVED');
- ChangeResolution($::FORM{'resolution'});
+ ChangeResolution($cgi->param('resolution'));
last SWITCH;
};
/^reassign$/ && CheckonComment( "reassign" ) && do {
- if ($::FORM{'andconfirm'}) {
+ if ($cgi->param('andconfirm')) {
DoConfirm();
}
ChangeStatus('NEW');
DoComma();
- if (!defined $::FORM{'assigned_to'}
- || trim($::FORM{'assigned_to'}) eq "")
- {
+ if (!defined $cgi->param('assigned_to')
+ || trim($cgi->param('assigned_to')) eq "") {
ThrowUserError("reassign_to_empty");
}
- $assignee = DBNameToIdAndCheck(trim($::FORM{'assigned_to'}));
+ $assignee = DBNameToIdAndCheck(trim($cgi->param('assigned_to')));
$::query .= "assigned_to = $assignee";
last SWITCH;
};
/^reassignbycomponent$/ && CheckonComment( "reassignbycomponent" ) && do {
- if ($::FORM{'product'} eq $::FORM{'dontchange'}) {
+ if ($cgi->param('product') eq $cgi->param('dontchange')) {
ThrowUserError("need_product");
}
- if ($::FORM{'component'} eq $::FORM{'dontchange'}) {
+ if ($cgi->param('component') eq $cgi->param('dontchange')) {
ThrowUserError("need_component");
}
- if ($::FORM{'compconfirm'}) {
+ if ($cgi->param('compconfirm')) {
DoConfirm();
}
ChangeStatus('NEW');
/^duplicate$/ && CheckonComment( "duplicate" ) && do {
# Make sure we can change the original bug (issue A on bug 96085)
CheckFormFieldDefined($cgi, 'dup_id');
- ValidateBugID($::FORM{'dup_id'}, 'dup_id');
+ $duplicate = $cgi->param('dup_id');
+ ValidateBugID($duplicate, 'dup_id');
+ $cgi->param('dup_id', $duplicate);
# Also, let's see if the reporter has authorization to see
# the bug to which we are duping. If not we need to prompt.
DuplicateUserConfirm();
- $duplicate = $::FORM{'dup_id'};
- if (!defined($::FORM{'id'}) || $duplicate == $::FORM{'id'}) {
+ if (!defined $cgi->param('id') || $duplicate == $cgi->param('id')) {
ThrowUserError("dupe_of_self_disallowed");
}
ChangeStatus('RESOLVED');
ChangeResolution('DUPLICATE');
- $::FORM{'comment'} .= "\n\n*** This bug has been marked " .
- "as a duplicate of $duplicate ***";
+ my $comment = $cgi->param('comment');
+ $comment .= "\n\n*** This bug has been marked " .
+ "as a duplicate of $duplicate ***";
+ $cgi->param('comment', $comment);
last SWITCH;
};
- ThrowCodeError("unknown_action", { action => $::FORM{'knob'} });
-}
-
-
-if ($#idlist < 0) {
- ThrowUserError("no_bugs_chosen");
+ ThrowCodeError("unknown_action", { action => $cgi->param('knob') });
}
-
my @keywordlist;
my %keywordseen;
-if ($::FORM{'keywords'}) {
- foreach my $keyword (split(/[\s,]+/, $::FORM{'keywords'})) {
+if (defined $cgi->param('keywords')) {
+ foreach my $keyword (split(/[\s,]+/, $cgi->param('keywords'))) {
if ($keyword eq '') {
next;
}
}
}
-my $keywordaction = $::FORM{'keywordaction'} || "makeexact";
+my $keywordaction = $cgi->param('keywordaction') || "makeexact";
if (!grep($keywordaction eq $_, qw(add delete makeexact))) {
$keywordaction = "makeexact";
}
if ($::comma eq ""
&& (! @groupAdd) && (! @groupDel)
&& (! @::legal_keywords || (0 == @keywordlist && $keywordaction ne "makeexact"))
- && defined $::FORM{'masscc'} && ! $::FORM{'masscc'}
+ && defined $cgi->param('masscc') && ! $cgi->param('masscc')
) {
- if (!defined $::FORM{'comment'} || $::FORM{'comment'} =~ /^\s*$/) {
+ if (!defined $cgi->param('comment') || $cgi->param('comment') =~ /^\s*$/) {
ThrowUserError("bugs_not_changed");
}
}
# Process data for Time Tracking fields
if (UserInGroup(Param('timetrackinggroup'))) {
foreach my $field ("estimated_time", "remaining_time") {
- if (defined $::FORM{$field}) {
- my $er_time = trim($::FORM{$field});
- if ($er_time ne $::FORM{'dontchange'}) {
+ if (defined $cgi->param($field)) {
+ my $er_time = trim($cgi->param($field));
+ if ($er_time ne $cgi->param('dontchange')) {
DoComma();
$::query .= "$field = " . SqlQuote($er_time);
}
}
}
- if (defined $::FORM{'deadline'}) {
+ if (defined $cgi->param('deadline')) {
DoComma();
$::query .= "deadline = ";
- if ($::FORM{'deadline'}) {
- Bugzilla::Util::ValidateDate($::FORM{'deadline'}, 'YYYY-MM-DD');
- $::query .= SqlQuote($::FORM{'deadline'});
+ if ($cgi->param('deadline')) {
+ Bugzilla::Util::ValidateDate($cgi->param('deadline'), 'YYYY-MM-DD');
+ $::query .= SqlQuote($cgi->param('deadline'));
} else {
$::query .= "NULL" ;
}
return 0;
}
-# this loop iterates once for each bug to be processed (eg when this script
-# is called with multiple bugs selected from buglist.cgi instead of
+# This loop iterates once for each bug to be processed (i.e. all the
+# bugs selected when this script is called with multiple bugs selected
+# from buglist.cgi, or just the one bug when called from
# show_bug.cgi).
#
foreach my $id (@idlist) {
# this id ready for the loop below, otherwise anybody can
# change the component of a bug (we checked product above).
# http://bugzilla.mozilla.org/show_bug.cgi?id=180545
- my $product_id = get_product_id($::FORM{'product'});
+ my $product_id = get_product_id($cgi->param('product'));
- if ($::FORM{'component'} ne $::FORM{'dontchange'}) {
- $::FORM{'component_id'} =
- get_component_id($product_id, $::FORM{'component'});
+ if ($cgi->param('component') ne $cgi->param('dontchange')) {
+ $cgi->param('component_id',
+ get_component_id($product_id, $cgi->param('component')));
}
- # It may sound crazy to set %formhash for each bug as $::FORM{}
+ # It may sound crazy to set %formhash for each bug as $cgi->param()
# will not change, but %formhash is modified below and we prefer
# to set it again.
my $i = 0;
# Consider NULL db entries to be equivalent to the empty string
$oldvalues[$i] = '' unless defined $oldvalues[$i];
$oldhash{$col} = $oldvalues[$i];
- $formhash{$col} = $::FORM{$col} if defined $::FORM{$col};
+ $formhash{$col} = $cgi->param($col) if defined $cgi->param($col);
$i++;
}
# If the user is reassigning bugs, we need to:
# - update $newhash{'bug_status'} to its real state if the bug
# is in the unconfirmed state.
$formhash{'qa_contact'} = $qacontact if Param('useqacontact');
- if ($::FORM{'knob'} eq 'reassignbycomponent'
- || $::FORM{'knob'} eq 'reassign')
- {
+ if ($cgi->param('knob') eq 'reassignbycomponent'
+ || $cgi->param('knob') eq 'reassign') {
$formhash{'assigned_to'} = $assignee;
if ($oldhash{'bug_status'} eq 'UNCONFIRMED') {
$formhash{'bug_status'} = $oldhash{'bug_status'};
if ($col eq 'component_id') {
# Display the component name
$vars->{'oldvalue'} = get_component_name($oldhash{$col});
- $vars->{'newvalue'} = $::FORM{'component'};
+ $vars->{'newvalue'} = $cgi->param('component');
$vars->{'field'} = 'component';
} elsif ($col eq 'assigned_to' || $col eq 'qa_contact') {
# Display the assignee or QA contact email address
# the list hasn't changed. To fix that, we have to call CheckCanChangeField
# again with old!=new if the keyword action is "delete" and old=new.
if ($keywordaction eq "delete"
- && exists $::FORM{keywords}
+ && defined $cgi->param('keywords')
&& length(@keywordlist) > 0
- && $::FORM{keywords} eq $oldhash{keywords}
+ && $cgi->param('keywords') eq $oldhash{keywords}
&& !CheckCanChangeField("keywords", $id, "old is not", "equal to new"))
{
$vars->{'oldvalue'} = $oldhash{keywords};
{ product => $oldhash{'product'} });
}
- if (defined $::FORM{'product'}
- && $::FORM{'product'} ne $::FORM{'dontchange'}
- && $::FORM{'product'} ne $oldhash{'product'}
- && !CanEnterProduct($::FORM{'product'})) {
+ if (defined $cgi->param('product')
+ && $cgi->param('product') ne $cgi->param('dontchange')
+ && $cgi->param('product') ne $oldhash{'product'}
+ && !CanEnterProduct($cgi->param('product'))) {
ThrowUserError("entry_access_denied",
- { product => $::FORM{'product'} });
+ { product => $cgi->param('product') });
}
if ($requiremilestone) {
# musthavemilestoneonaccept applies only if at least two
}
}
}
- if (defined $::FORM{'delta_ts'} && $::FORM{'delta_ts'} ne $delta_ts) {
- ($vars->{'operations'}) = GetBugActivity($::FORM{'id'}, $::FORM{'delta_ts'});
+ if (defined $cgi->param('delta_ts') && $cgi->param('delta_ts') ne $delta_ts)
+ {
+ ($vars->{'operations'}) = GetBugActivity($cgi->param('id'),
+ $cgi->param('delta_ts'));
- $vars->{'start_at'} = $::FORM{'longdesclength'};
+ $vars->{'start_at'} = $cgi->param('longdesclength');
$vars->{'comments'} = Bugzilla::Bug::GetComments($id);
- $::FORM{'delta_ts'} = $delta_ts;
- $vars->{'form'} = \%::FORM;
- $vars->{'mform'} = \%::MFORM;
+ $cgi->param('delta_ts', $delta_ts);
$vars->{'bug_id'} = $id;
}
my %deps;
- if (defined $::FORM{'dependson'}) {
+ if (defined $cgi->param('dependson')) {
my $me = "blocked";
my $target = "dependson";
my %deptree;
for (1..2) {
$deptree{$target} = [];
my %seen;
- foreach my $i (split('[\s,]+', $::FORM{$target})) {
+ foreach my $i (split('[\s,]+', $cgi->param($target))) {
next if $i eq "";
if ($id eq $i) {
my $work_time;
if (UserInGroup(Param('timetrackinggroup'))) {
- $work_time = $::FORM{'work_time'};
+ $work_time = $cgi->param('work_time');
if ($work_time) {
# AppendComment (called below) can in theory raise an error,
# but because we've already validated work_time here it's
# safe to log the entry before adding the comment.
- LogActivityEntry($id, "work_time", "", $::FORM{'work_time'},
+ LogActivityEntry($id, "work_time", "", $work_time,
$whoid, $timestamp);
}
}
- if ($::FORM{'comment'} || $work_time) {
- AppendComment($id, Bugzilla->user->login, $::FORM{'comment'},
- $::FORM{'commentprivacy'}, $timestamp, $work_time);
+ if ($cgi->param('comment') || $work_time) {
+ AppendComment($id, Bugzilla->user->login, $cgi->param('comment'),
+ $cgi->param('commentprivacy'), $timestamp, $work_time);
$bug_changed = 1;
}
- if (@::legal_keywords && exists $::FORM{keywords}) {
+ if (@::legal_keywords && defined $cgi->param('keywords')) {
# There are three kinds of "keywordsaction": makeexact, add, delete.
# For makeexact, we delete everything, and then add our things.
# For add, we delete things we're adding (to make sure we don't
}
my $newproduct_id = $oldhash{'product_id'};
- if ((defined $::FORM{'product'})
- && ($::FORM{'product'} ne $::FORM{'dontchange'})) {
- my $newproduct_id = get_product_id($::FORM{'product'});
+ if ((defined $cgi->param('product'))
+ && ($cgi->param('product') ne $cgi->param('dontchange')))
+ {
+ my $newproduct_id = get_product_id($cgi->param('product'));
}
my %groupsrequired = ();
}
my @ccRemoved = ();
- if (defined $::FORM{newcc} || defined $::FORM{'addselfcc'} || defined $::FORM{removecc} || defined $::FORM{masscc}) {
+ if (defined $cgi->param('newcc')
+ || defined $cgi->param('addselfcc')
+ || defined $cgi->param('removecc')
+ || defined $cgi->param('masscc')) {
# Get the current CC list for this bug
my %oncc;
SendSQL("SELECT who FROM cc WHERE bug_id = $id");
undef, $id)};
@dependencychanged{@oldlist} = 1;
- if (defined $::FORM{'dependson'}) {
+ if (defined $cgi->param('dependson')) {
my %snapshot;
my @newlist = sort {$a <=> $b} @{$deps{$target}};
@dependencychanged{@newlist} = 1;
# conditions under which these activities take place, more information
# about which can be found in comments within the conditionals below.
# Check if the user has changed the product to which the bug belongs;
- if (
- defined $::FORM{'product'}
- && $::FORM{'product'} ne $::FORM{'dontchange'}
- && $::FORM{'product'} ne $oldhash{'product'}
+ if (defined $cgi->param('product')
+ && $cgi->param('product') ne $cgi->param('dontchange')
+ && $cgi->param('product') ne $oldhash{'product'}
) {
- my $newproduct_id = get_product_id($::FORM{'product'});
+ $newproduct_id = get_product_id($cgi->param('product'));
# Depending on the "addtonewgroup" variable, groups with
# defaults will change.
#
# replaced.
push(@groupstoremove, @defaultstoremove);
if (AnyDefaultGroups()
- && (($::FORM{'addtonewgroup'} eq 'yes')
- || (($::FORM{'addtonewgroup'} eq 'yesifinold')
+ && (($cgi->param('addtonewgroup') eq 'yes')
+ || (($cgi->param('addtonewgroup') eq 'yesifinold')
&& ($buginanydefault)))) {
push(@groupstoadd, @defaultstoadd);
}
if ($duplicate) {
# Check to see if Reporter of this bug is reporter of Dupe
- SendSQL("SELECT reporter FROM bugs WHERE bug_id = " . SqlQuote($::FORM{'id'}));
+ SendSQL("SELECT reporter FROM bugs WHERE bug_id = " .
+ $cgi->param('id'));
my $reporter = FetchOneColumn();
- SendSQL("SELECT reporter FROM bugs WHERE bug_id = " . SqlQuote($duplicate) . " and reporter = $reporter");
+ SendSQL("SELECT reporter FROM bugs WHERE bug_id = " .
+ "$duplicate and reporter = $reporter");
my $isreporter = FetchOneColumn();
- SendSQL("SELECT who FROM cc WHERE bug_id = " . SqlQuote($duplicate) . " and who = $reporter");
+ SendSQL("SELECT who FROM cc WHERE bug_id = " .
+ " $duplicate and who = $reporter");
my $isoncc = FetchOneColumn();
- unless ($isreporter || $isoncc || ! $::FORM{'confirm_add_duplicate'}) {
+ unless ($isreporter || $isoncc
+ || !$cgi->param('confirm_add_duplicate')) {
# The reporter is oblivious to the existence of the new bug and is permitted access
# ... add 'em to the cc (and record activity)
LogActivityEntry($duplicate,"cc","",DBID_to_name($reporter),
$whoid,$timestamp);
- SendSQL("INSERT INTO cc (who, bug_id) VALUES ($reporter, " . SqlQuote($duplicate) . ")");
+ SendSQL("INSERT INTO cc (who, bug_id) " .
+ "VALUES ($reporter, $duplicate)");
}
# Bug 171639 - Duplicate notifications do not need to be private.
AppendComment($duplicate, Bugzilla->user->login,
- "*** Bug $::FORM{'id'} has been marked as a duplicate of this bug. ***",
+ "*** Bug " . $cgi->param('id') .
+ " has been marked as a duplicate of this bug. ***",
0, $timestamp);
CheckFormFieldDefined($cgi,'comment');
- SendSQL("INSERT INTO duplicates VALUES ($duplicate, $::FORM{'id'})");
+ SendSQL("INSERT INTO duplicates VALUES ($duplicate, " .
+ $cgi->param('id') . ")");
$vars->{'mailrecipients'} = { 'changer' => Bugzilla->user->login };
projects / thirdparty / bugzilla.git / commitdiff
