arm64: dts: qcom: ipq5018: Correct USB DWC3 wrapper interrupts

Interrupts for DWC3 node were completely mixed up - SPI interrupt 62 is
not listed in reference manual at all.  It was also causing dtbs_check
warnings:

  ipq5018-rdp432-c2.dtb: usb@8af8800 (qcom,ipq5018-dwc3): interrupt-names:0: 'pwr_event' was expected
  ipq5018-rdp432-c2.dtb: usb@8af8800 (qcom,ipq5018-dwc3): interrupt-names: ['hs_phy_irq'] is too short

Warning itself was introduced by commit 53c6d854be4e ("dt-bindings: usb:
dwc3: Clean up hs_phy_irq in binding"), but this was trying to bring
sanity to the interrupts overall, although did a mistake for IPQ5018.
IPQ5018 does not have QUSB2 PHY and its interrupts should rather match
ones used in IPQ5332.

Correct it by using interrupts matching the bindings and reference
manual.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Tested-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/20260106185123.19929-3-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 721b642acf8e2e5b5753e27f8ac6bcf5dad2c31f..6f8004a22a1ffdb6da0be410b772be5fe0473eef 100644 (file)
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -571,8 +571,12 @@
                        compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
                        reg = <0x08af8800 0x400>;
 
-                       interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-                       interrupt-names = "hs_phy_irq";
+                       interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+                       interrupt-names = "pwr_event",
+                                         "dp_hs_phy_irq",
+                                         "dm_hs_phy_irq";
 
                        clocks = <&gcc GCC_USB0_MASTER_CLK>,
                                 <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,