[mii] Synchronise constants with current Linux include/linux/mii.h

Signed-off-by: Michael Brown <mcb30@ipxe.org>

diff --git a/src/drivers/net/etherfabric.c b/src/drivers/net/etherfabric.c
index e82d6eb8bb82d1ad55b0d38036d4826f7bc63f89..a0a009cb960c3805f96b9859e46989425bc80a84 100644 (file)
--- a/src/drivers/net/etherfabric.c
+++ b/src/drivers/net/etherfabric.c
@@ -93,7 +93,6 @@ static int falcon_mdio_read ( struct efab_nic *efab, int device, int location );
 #define LPA_EF_10000FULL               0x00040000
 #define LPA_EF_10000HALF               0x00080000
 
-#define LPA_100                        (LPA_100FULL | LPA_100HALF | LPA_100BASE4)
 #define LPA_EF_1000            ( LPA_EF_1000FULL | LPA_EF_1000HALF )
 #define LPA_EF_10000               ( LPA_EF_10000FULL | LPA_EF_10000HALF )
 #define LPA_EF_DUPLEX          ( LPA_10FULL | LPA_100FULL | LPA_EF_1000FULL | \

diff --git a/src/include/mii.h b/src/include/mii.h
index b7dce13aca3f2639bf47c9a51939933cfd1c9c50..e2afef854aae98e134732cf7f87e4b3e6f31cec6 100644 (file)
--- a/src/include/mii.h
+++ b/src/include/mii.h
@@ -1,144 +1,141 @@
-/*
- * linux/mii.h: definitions for MII-compatible transceivers
- * Originally drivers/net/sunhme.h.
+#ifndef _MII_H_
+#define _MII_H_
+
+/** @file
  *
- * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
+ * Media Independent Interface constants
+ *
+ * Extracted from Linux's include/linux/mii.h
  *
- * Copied Form Linux 2.4.25 an unneeded items removed by:
- * Timothy Legge (timlegge at etherboot dot org)
+ * Copyright (C) 1996, 1999, 2001 David S. Miller (davem@redhat.com)
  *
- * 03/26/2004
  */
 
 FILE_LICENCE ( GPL2_ONLY );
 
-#ifndef _MII_H_
-#define _MII_H_
-
 /* Generic MII registers. */
-
-#define MII_BMCR            0x00       /* Basic mode control register */
-#define MII_BMSR            0x01       /* Basic mode status register  */
-#define MII_PHYSID1         0x02        /* PHYS ID 1                   */
-#define MII_PHYSID2         0x03        /* PHYS ID 2                   */
-#define MII_ADVERTISE       0x04       /* Advertisement control reg   */
-#define MII_LPA             0x05       /* Link partner ability reg    */
-#define MII_EXPANSION       0x06        /* Expansion register          */
-#define MII_CTRL1000        0x09        /* 1000BASE-T control          */
-#define MII_STAT1000        0x0a        /* 1000BASE-T status           */
-#define MII_ESTATUS         0x0f        /* Extended Status */
-#define MII_DCOUNTER        0x12        /* Disconnect counter          */
-#define MII_FCSCOUNTER      0x13        /* False carrier counter       */
-#define MII_NWAYTEST        0x14        /* N-way auto-neg test reg     */
-#define MII_RERRCOUNTER     0x15        /* Receive error counter       */
-#define MII_SREVISION       0x16        /* Silicon revision            */
-#define MII_RESV1           0x17        /* Reserved...                 */
-#define MII_LBRERROR        0x18        /* Lpback, rx, bypass error    */
-#define MII_PHYADDR         0x19        /* PHY address                 */
-#define MII_RESV2           0x1a        /* Reserved...                 */
-#define MII_TPISTATUS       0x1b        /* TPI status for 10mbps       */
-#define MII_NCONFIG         0x1c        /* Network interface config    */
+#define MII_BMCR           0x00        /* Basic mode control register */
+#define MII_BMSR           0x01        /* Basic mode status register  */
+#define MII_PHYSID1        0x02        /* PHYS ID 1                   */
+#define MII_PHYSID2        0x03        /* PHYS ID 2                   */
+#define MII_ADVERTISE      0x04        /* Advertisement control reg   */
+#define MII_LPA                    0x05        /* Link partner ability reg    */
+#define MII_EXPANSION      0x06        /* Expansion register          */
+#define MII_CTRL1000       0x09        /* 1000BASE-T control          */
+#define MII_STAT1000       0x0a        /* 1000BASE-T status           */
+#define MII_ESTATUS        0x0f        /* Extended Status */
+#define MII_DCOUNTER       0x12        /* Disconnect counter          */
+#define MII_FCSCOUNTER     0x13        /* False carrier counter       */
+#define MII_NWAYTEST       0x14        /* N-way auto-neg test reg     */
+#define MII_RERRCOUNTER            0x15        /* Receive error counter       */
+#define MII_SREVISION      0x16        /* Silicon revision            */
+#define MII_RESV1          0x17        /* Reserved...                 */
+#define MII_LBRERROR       0x18        /* Lpback, rx, bypass error    */
+#define MII_PHYADDR        0x19        /* PHY address                 */
+#define MII_RESV2          0x1a        /* Reserved...                 */
+#define MII_TPISTATUS      0x1b        /* TPI status for 10mbps       */
+#define MII_NCONFIG        0x1c        /* Network interface config    */
 
 /* Basic mode control register. */
-#define BMCR_RESV               0x003f  /* Unused...                   */
-#define BMCR_SPEED1000          0x0040  /* MSB of Speed (1000)         */
-#define BMCR_CTST               0x0080  /* Collision test              */
-#define BMCR_FULLDPLX           0x0100 /* Full duplex                 */
-#define BMCR_ANRESTART          0x0200 /* Auto negotiation restart    */
-#define BMCR_ISOLATE            0x0400  /* Disconnect DP83840 from MII */
-#define BMCR_PDOWN              0x0800  /* Powerdown the DP83840       */
-#define BMCR_ANENABLE           0x1000 /* Enable auto negotiation     */
-#define BMCR_SPEED100           0x2000 /* Select 100Mbps              */
-#define BMCR_LOOPBACK           0x4000  /* TXD loopback bits           */
-#define BMCR_RESET              0x8000 /* Reset the DP83840           */
+#define BMCR_RESV              0x003f  /* Unused...                   */
+#define BMCR_SPEED1000         0x0040  /* MSB of Speed (1000)         */
+#define BMCR_CTST              0x0080  /* Collision test              */
+#define BMCR_FULLDPLX          0x0100  /* Full duplex                 */
+#define BMCR_ANRESTART         0x0200  /* Auto negotiation restart    */
+#define BMCR_ISOLATE           0x0400  /* Disconnect DP83840 from MII */
+#define BMCR_PDOWN             0x0800  /* Powerdown the DP83840       */
+#define BMCR_ANENABLE          0x1000  /* Enable auto negotiation     */
+#define BMCR_SPEED100          0x2000  /* Select 100Mbps              */
+#define BMCR_LOOPBACK          0x4000  /* TXD loopback bits           */
+#define BMCR_RESET             0x8000  /* Reset the DP83840           */
 
 /* Basic mode status register. */
-#define BMSR_ERCAP              0x0001  /* Ext-reg capability          */
-#define BMSR_JCD                0x0002  /* Jabber detected             */
-#define BMSR_LSTATUS            0x0004  /* Link status                 */
-#define BMSR_ANEGCAPABLE        0x0008  /* Able to do auto-negotiation */
-#define BMSR_RFAULT             0x0010  /* Remote fault detected       */
-#define BMSR_ANEGCOMPLETE       0x0020  /* Auto-negotiation complete   */
-#define BMSR_RESV               0x00c0  /* Unused...                   */
-#define BMSR_ESTATEN            0x0100  /* Extended Status in R15 */
-#define BMSR_100HALF2           0x0200  /* Can do 100BASE-T2 HDX */
-#define BMSR_100FULL2           0x0400  /* Can do 100BASE-T2 FDX */
-#define BMSR_10HALF             0x0800  /* Can do 10mbps, half-duplex  */
-#define BMSR_10FULL             0x1000  /* Can do 10mbps, full-duplex  */
-#define BMSR_100HALF            0x2000  /* Can do 100mbps, half-duplex */
-#define BMSR_100FULL            0x4000  /* Can do 100mbps, full-duplex */
-#define BMSR_100BASE4           0x8000  /* Can do 100mbps, 4k packets  */
+#define BMSR_ERCAP             0x0001  /* Ext-reg capability          */
+#define BMSR_JCD               0x0002  /* Jabber detected             */
+#define BMSR_LSTATUS           0x0004  /* Link status                 */
+#define BMSR_ANEGCAPABLE       0x0008  /* Able to do auto-negotiation */
+#define BMSR_RFAULT            0x0010  /* Remote fault detected       */
+#define BMSR_ANEGCOMPLETE      0x0020  /* Auto-negotiation complete   */
+#define BMSR_RESV              0x00c0  /* Unused...                   */
+#define BMSR_ESTATEN           0x0100  /* Extended Status in R15 */
+#define BMSR_100HALF2          0x0200  /* Can do 100BASE-T2 HDX */
+#define BMSR_100FULL2          0x0400  /* Can do 100BASE-T2 FDX */
+#define BMSR_10HALF            0x0800  /* Can do 10mbps, half-duplex  */
+#define BMSR_10FULL            0x1000  /* Can do 10mbps, full-duplex  */
+#define BMSR_100HALF           0x2000  /* Can do 100mbps, half-duplex */
+#define BMSR_100FULL           0x4000  /* Can do 100mbps, full-duplex */
+#define BMSR_100BASE4          0x8000  /* Can do 100mbps, 4k packets  */
 
 /* Advertisement control register. */
-#define ADVERTISE_SLCT          0x001f  /* Selector bits               */
-#define ADVERTISE_CSMA          0x0001  /* Only selector supported     */
-#define ADVERTISE_10HALF        0x0020 /* Try for 10mbps half-duplex  */
-#define ADVERTISE_1000XFULL     0x0020  /* Try for 1000BASE-X full-duplex */
-#define ADVERTISE_10FULL        0x0040 /* Try for 10mbps full-duplex  */
-#define ADVERTISE_1000XHALF     0x0040  /* Try for 1000BASE-X half-duplex */
-#define ADVERTISE_100HALF       0x0080 /* Try for 100mbps half-duplex */
-#define ADVERTISE_1000XPAUSE    0x0080  /* Try for 1000BASE-X pause    */
-#define ADVERTISE_100FULL       0x0100 /* Try for 100mbps full-duplex */
-#define ADVERTISE_1000XPSE_ASYM 0x0100  /* Try for 1000BASE-X asym pause */
-#define ADVERTISE_100BASE4      0x0200  /* Try for 100mbps 4k packets  */
-#define ADVERTISE_PAUSE_CAP     0x0400  /* Try for pause               */
-#define ADVERTISE_PAUSE_ASYM    0x0800  /* Try for asymetric pause     */
-#define ADVERTISE_RESV          0x1000  /* Unused...                   */
-#define ADVERTISE_RFAULT        0x2000  /* Say we can detect faults    */
-#define ADVERTISE_LPACK         0x4000  /* Ack link partners response  */
-#define ADVERTISE_NPAGE         0x8000  /* Next page bit               */
-
-#define ADVERTISE_FULL (ADVERTISE_100FULL | ADVERTISE_10FULL | \
-                       ADVERTISE_CSMA)
-#define ADVERTISE_ALL (ADVERTISE_10HALF | ADVERTISE_10FULL | \
-                      ADVERTISE_100HALF | ADVERTISE_100FULL)
+#define ADVERTISE_SLCT         0x001f  /* Selector bits               */
+#define ADVERTISE_CSMA         0x0001  /* Only selector supported     */
+#define ADVERTISE_10HALF       0x0020  /* Try for 10mbps half-duplex  */
+#define ADVERTISE_1000XFULL    0x0020  /* Try for 1000BASE-X full-duplex */
+#define ADVERTISE_10FULL       0x0040  /* Try for 10mbps full-duplex  */
+#define ADVERTISE_1000XHALF    0x0040  /* Try for 1000BASE-X half-duplex */
+#define ADVERTISE_100HALF      0x0080  /* Try for 100mbps half-duplex */
+#define ADVERTISE_1000XPAUSE   0x0080  /* Try for 1000BASE-X pause    */
+#define ADVERTISE_100FULL      0x0100  /* Try for 100mbps full-duplex */
+#define ADVERTISE_1000XPSE_ASYM 0x0100 /* Try for 1000BASE-X asym pause */
+#define ADVERTISE_100BASE4     0x0200  /* Try for 100mbps 4k packets  */
+#define ADVERTISE_PAUSE_CAP    0x0400  /* Try for pause               */
+#define ADVERTISE_PAUSE_ASYM   0x0800  /* Try for asymetric pause     */
+#define ADVERTISE_RESV         0x1000  /* Unused...                   */
+#define ADVERTISE_RFAULT       0x2000  /* Say we can detect faults    */
+#define ADVERTISE_LPACK                0x4000  /* Ack link partners response  */
+#define ADVERTISE_NPAGE                0x8000  /* Next page bit               */
+
+#define ADVERTISE_FULL ( ADVERTISE_100FULL | ADVERTISE_10FULL | \
+                        ADVERTISE_CSMA)
+#define ADVERTISE_ALL ( ADVERTISE_10HALF | ADVERTISE_10FULL |  \
+                       ADVERTISE_100HALF | ADVERTISE_100FULL )
 
 /* Link partner ability register. */
-#define LPA_SLCT                0x001f  /* Same as advertise selector  */
-#define LPA_10HALF              0x0020  /* Can do 10mbps half-duplex   */
-#define LPA_1000XFULL           0x0020  /* Can do 1000BASE-X full-duplex */
-#define LPA_10FULL              0x0040  /* Can do 10mbps full-duplex   */
-#define LPA_1000XHALF           0x0040  /* Can do 1000BASE-X half-duplex */
-#define LPA_100HALF             0x0080  /* Can do 100mbps half-duplex  */
-#define LPA_1000XPAUSE          0x0080  /* Can do 1000BASE-X pause     */
-#define LPA_100FULL             0x0100  /* Can do 100mbps full-duplex  */
-#define LPA_1000XPAUSE_ASYM     0x0100  /* Can do 1000BASE-X pause asym*/
-#define LPA_100BASE4            0x0200  /* Can do 100mbps 4k packets   */
-#define LPA_PAUSE_CAP           0x0400  /* Can pause                   */
-#define LPA_PAUSE_ASYM          0x0800  /* Can pause asymetrically     */
-#define LPA_RESV                0x1000  /* Unused...                   */
-#define LPA_RFAULT              0x2000  /* Link partner faulted        */
-#define LPA_LPACK               0x4000  /* Link partner acked us       */
-#define LPA_NPAGE               0x8000  /* Next page bit               */
-
-#define LPA_DUPLEX            (LPA_10FULL | LPA_100FULL)
-#define LPA_100                       (LPA_100FULL | LPA_100HALF | LPA_100BASE4)
+#define LPA_SLCT               0x001f  /* Same as advertise selector  */
+#define LPA_10HALF             0x0020  /* Can do 10mbps half-duplex   */
+#define LPA_1000XFULL          0x0020  /* Can do 1000BASE-X full-duplex */
+#define LPA_10FULL             0x0040  /* Can do 10mbps full-duplex   */
+#define LPA_1000XHALF          0x0040  /* Can do 1000BASE-X half-duplex */
+#define LPA_100HALF            0x0080  /* Can do 100mbps half-duplex  */
+#define LPA_1000XPAUSE         0x0080  /* Can do 1000BASE-X pause     */
+#define LPA_100FULL            0x0100  /* Can do 100mbps full-duplex  */
+#define LPA_1000XPAUSE_ASYM    0x0100  /* Can do 1000BASE-X pause asym*/
+#define LPA_100BASE4           0x0200  /* Can do 100mbps 4k packets   */
+#define LPA_PAUSE_CAP          0x0400  /* Can pause                   */
+#define LPA_PAUSE_ASYM         0x0800  /* Can pause asymetrically     */
+#define LPA_RESV               0x1000  /* Unused...                   */
+#define LPA_RFAULT             0x2000  /* Link partner faulted        */
+#define LPA_LPACK              0x4000  /* Link partner acked us       */
+#define LPA_NPAGE              0x8000  /* Next page bit               */
+
+#define LPA_DUPLEX             ( LPA_10FULL | LPA_100FULL )
+#define LPA_100                        ( LPA_100FULL | LPA_100HALF | LPA_100BASE4 )
 
 /* Expansion register for auto-negotiation. */
-#define EXPANSION_NWAY          0x0001  /* Can do N-way auto-nego      */
-#define EXPANSION_LCWP          0x0002  /* Got new RX page code word   */
-#define EXPANSION_ENABLENPAGE   0x0004  /* This enables npage words    */
-#define EXPANSION_NPCAPABLE     0x0008  /* Link partner supports npage */
-#define EXPANSION_MFAULTS       0x0010  /* Multiple faults detected    */
-#define EXPANSION_RESV          0xffe0  /* Unused...                   */
+#define EXPANSION_NWAY         0x0001  /* Can do N-way auto-nego      */
+#define EXPANSION_LCWP         0x0002  /* Got new RX page code word   */
+#define EXPANSION_ENABLENPAGE  0x0004  /* This enables npage words    */
+#define EXPANSION_NPCAPABLE    0x0008  /* Link partner supports npage */
+#define EXPANSION_MFAULTS      0x0010  /* Multiple faults detected    */
+#define EXPANSION_RESV         0xffe0  /* Unused...                   */
 
-#define ESTATUS_1000_TFULL      0x2000  /* Can do 1000BT Full */
-#define ESTATUS_1000_THALF      0x1000  /* Can do 1000BT Half */
+#define ESTATUS_1000_TFULL     0x2000  /* Can do 1000BT Full */
+#define ESTATUS_1000_THALF     0x1000  /* Can do 1000BT Half */
 
 /* N-way test register. */
-#define NWAYTEST_RESV1          0x00ff  /* Unused...                   */
-#define NWAYTEST_LOOPBACK       0x0100  /* Enable loopback for N-way   */
-#define NWAYTEST_RESV2          0xfe00  /* Unused...                   */
+#define NWAYTEST_RESV1         0x00ff  /* Unused...                   */
+#define NWAYTEST_LOOPBACK      0x0100  /* Enable loopback for N-way   */
+#define NWAYTEST_RESV2         0xfe00  /* Unused...                   */
 
 /* 1000BASE-T Control register */
-#define ADVERTISE_1000FULL      0x0200  /* Advertise 1000BASE-T full duplex */
-#define ADVERTISE_1000HALF      0x0100  /* Advertise 1000BASE-T half duplex */
+#define ADVERTISE_1000FULL     0x0200  /* Advertise 1000BASE-T full duplex */
+#define ADVERTISE_1000HALF     0x0100  /* Advertise 1000BASE-T half duplex */
 
 /* 1000BASE-T Status register */
-#define LPA_1000LOCALRXOK       0x2000  /* Link partner local receiver status */
-#define LPA_1000REMRXOK         0x1000  /* Link partner remote receiver status */
-#define LPA_1000FULL            0x0800  /* Link partner 1000BASE-T full duplex */
-#define LPA_1000HALF            0x0400  /* Link partner 1000BASE-T half duplex */
+#define LPA_1000LOCALRXOK      0x2000  /* Partner local receiver status */
+#define LPA_1000REMRXOK                0x1000  /* Partner remote receiver status */
+#define LPA_1000FULL           0x0800  /* Partner 1000BASE-T full duplex */
+#define LPA_1000HALF           0x0400  /* Partner 1000BASE-T half duplex */
 
 #include <ipxe/netdevice.h>