# By default, AWStats considers that records found in log file are successful
# hits if HTTP code returned by server is a valid HTTP code (200 and 304).
# Any other code are reported in HTTP error chart.
-# However in some specific environnement, with web server HTTP redirection,
+# However in some specific environment, with web server HTTP redirection,
# you can choose to also accept other codes.
# Example: "200 304 302 305"
# Default: "200 304"
# pages. This is primarily used to differentiate between the URLs of dynamic
# pages. If set to 1, mypage.html?id=x and mypage.html?id=y are counted as
# two different pages. Warning, when set to 1, memory required to run AWStats
-# is doubled.
+# is doubled. Try to avoid using this parameter on very large web sites.
# Possible values:
# 0 - URLs are cleaned from the query string (ie: "/mypage.html")
# 1 - Full URL with query string is used (ie: "/mypage.html?x=y")
WarningMessages=1
# To help you to detect if your log format is good, AWStats report an error
-# if the first NbOfLinesForCorruptedLog lines have all a format that does not
+# if all the first NbOfLinesForCorruptedLog lines have a format that does not
# match the LogFormat parameter.
# However, some worm virus attack on your web server can result in a very high
# number of corrupted lines in your log. So if you experience awstats stop
-# because of bad virus records, you can increase this parameter (very rare).
+# because of bad virus records at the beginning of your log file, you can
+# increase this parameter (very rare).
# Default: 50
#
NbOfLinesForCorruptedLog=50
# OPTIONAL ACCURACY SETUP SECTION (Not required but increase AWStats features)
#-----------------------------------------------------------------------------
-# You can change value for following option to increase AWStats capabilities
-# (but this reduce AWStats speed).
-# Possible values: 0, 1 or 2
+# You can change value for following option to disable/enable AWStats capabilities.
+# Possible values: 0, 1
+# Possible values: 0, 1 or 2 for LevelForRobotsDetection
# Default: 1
+# Default: 2 for LevelForRobotsDetection
#
-LevelForRobotsDetection=1 # 0 will increase AWStats speed by 1%.
-LevelForBrowsersDetection=1 # 0 disables Browsers detection. No speed gain.
-LevelForOSDetection=1 # 0 disables OS detection. No speed gain.
-LevelForRefererAnalyze=1 # 0 will increase AWStats speed by 6%.
+LevelForRobotsDetection=2 # 0 will increase AWStats speed by 1%.
+LevelForBrowsersDetection=1 # 0 disables Browsers detection. No speed gain.
+LevelForOSDetection=1 # 0 disables OS detection. No speed gain.
+LevelForRefererAnalyze=1 # 0 will increase AWStats speed by 6%.
(0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0);
my ($AllowToUpdateStatsFromBrowser, $ArchiveLogRecords, $DetailedReportsOnNewWindows,
$FirstDayOfWeek, $SaveDatabaseFilesWithPermissionsForEveryone,
-$LevelForRobotsDetection, $LevelForBrowsersDetection, $LevelForOSDetection,
-$LevelForSearchEnginesDetection, $LevelForKeywordsDetection, $LevelForRefererAnalyze,
$ShowHeader, $ShowMenu, $ShowMonthDayStats, $ShowDaysOfWeekStats,
$ShowHoursStats, $ShowDomainsStats, $ShowHostsStats,
$ShowRobotsStats, $ShowSessionsStats, $ShowPagesStats, $ShowFileTypesStats,
$ShowKeywordsStats, $ShowHTTPErrorsStats,
$ShowFlagLinks, $ShowLinksOnUrl,
$WarningMessages)=
-(1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1);
+(1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1);
+my ($LevelForRobotsDetection, $LevelForBrowsersDetection, $LevelForOSDetection, $LevelForRefererAnalyze,
+$LevelForSearchEnginesDetection, $LevelForKeywordsDetection)=
+(2,1,1,1,1,1);
my ($ArchiveFileName, $DefaultFile, $HTMLHeadSection, $HTMLEndSection, $LinksToWhoIs,
$LogFile, $LogFormat, $Logo, $LogoLink, $StyleSheet, $WrapperScript, $SiteDomain)=
("","","","","","","","","","","","");
my @AllowAccessFromWebToFollowingAuthenticatedUsers=();
my @OnlyFiles = my @SkipDNSLookupFor = my @SkipFiles = my @SkipHosts = ();
my @DOWIndex=();
-my @RobotArrayList = my @RobotsSearchIDOrder = ();
+my @RobotsSearchIDOrder = ();
#my @RobotsSearchIDOrder_list1=(); my @RobotsSearchIDOrder_list2=(); my @RobotsSearchIDOrder_list3=();
#my @BrowsersSearchIDOrder = my @OSSearchIDOrder = my @SearchEnginesSearchIDOrder();
#my @WordsToCleanSearchUrl=();
if ($param =~ /^Expires/) { $Expires=$value; next; }
if ($param =~ /^WrapperScript/) { $WrapperScript=$value; next; }
# Read optional accuracy setup section
- if ($param =~ /^LevelForRobotsDetection/) { $LevelForRobotsDetection=$value; next; } # Not used yet
- if ($param =~ /^LevelForBrowsersDetection/) { $LevelForBrowsersDetection=$value; next; } # Not used yet
- if ($param =~ /^LevelForOSDetection/) { $LevelForOSDetection=$value; next; } # Not used yet
- if ($param =~ /^LevelForSearchEnginesDetection/) { $LevelForSearchEnginesDetection=$value; next; } # Not used yet
- if ($param =~ /^LevelForRefererAnalyze/) { $LevelForRefererAnalyze=$value; next; } # Not used yet
- if ($param =~ /^LevelForKeywordsDetection/) { $LevelForKeywordsDetection=$value; next; } # Not used yet
+ if ($param =~ /^LevelForRobotsDetection/) { $LevelForRobotsDetection=$value; next; }
+ if ($param =~ /^LevelForBrowsersDetection/) { $LevelForBrowsersDetection=$value; next; }
+ if ($param =~ /^LevelForOSDetection/) { $LevelForOSDetection=$value; next; }
+ if ($param =~ /^LevelForRefererAnalyze/) { $LevelForRefererAnalyze=$value; next; }
+ if ($param =~ /^LevelForSearchEnginesDetection/) { $LevelForSearchEnginesDetection=$value; next; }
+ if ($param =~ /^LevelForKeywordsDetection/) { $LevelForKeywordsDetection=$value; next; }
# Read optional appearance setup section
if ($param =~ /^Lang/) { $Lang=$value; next; }
if ($param =~ /^DirLang/) { $DirLang=$value; next; }
if ($SplitSearchString !~ /[0-1]/) { $SplitSearchString=0; }
if ($Expires !~ /^[\d]+/) { $Expires=0; }
# Optional accuracy setup section
- if ($LevelForRobotsDetection !~ /^[\d]+/) { $LevelForRobotsDetection=1; }
+ if ($LevelForRobotsDetection !~ /^[\d]+/) { $LevelForRobotsDetection=2; }
if ($LevelForBrowsersDetection !~ /^[\d]+/) { $LevelForBrowsersDetection=1; }
if ($LevelForOSDetection !~ /^[\d]+/) { $LevelForOSDetection=1; }
- if ($LevelForSearchEnginesDetection !~ /^[\d]+/) { $LevelForSearchEnginesDetection=1; }
if ($LevelForRefererAnalyze !~ /^[\d]+/) { $LevelForRefererAnalyze=1; }
+ if ($LevelForSearchEnginesDetection !~ /^[\d]+/) { $LevelForSearchEnginesDetection=1; }
if ($LevelForKeywordsDetection !~ /^[\d]+/) { $LevelForKeywordsDetection=1; }
# Optional appearance setup section
if ($MaxRowsInHTMLOutput !~ /^[\d]+/ || $MaxRowsInHTMLOutput<1) { $MaxRowsInHTMLOutput=1000; }
print "\n";
print "Now supports/detects:\n";
print " Reverse DNS lookup\n";
- print " Number of visits, unique visitors, list of last visits\n";
- print " Hosts list and unresolved IP addresses list\n";
- print " Days of week and rush hours\n";
+ print " Number of visits, number of unique visitors\n";
+ print " Visits duration and list of last visits\n";
print " Authenticated users\n";
- print " Viewed and entry pages\n";
- print " Type of files and Web compression\n";
+ print " Days of week and rush hours\n";
+ print " Hosts list and unresolved IP addresses list\n";
+ print " Most viewed, entry and exit pages\n";
+ print " Files type and Web compression\n";
print " ".(scalar keys %DomainsHashIDLib)." domains/countries\n";
print " ".(scalar keys %BrowsersHashIDLib)." browsers\n";
print " ".(scalar keys %OSHashLib)." operating systems\n";
print " ".(scalar keys %RobotsHashIDLib)." robots\n";
print " ".(scalar keys %SearchEnginesHashIDLib)." search engines (and keyphrases/keywords used from them)\n";
- print " All HTTP errors\n";
+ print " All HTTP errors with last referrer\n";
print " Report by day/month/year\n";
print " And a lot of other advanced options...\n";
print "New versions and FAQ at http://awstats.sourceforge.net\n";
if ($UpdateStats) {
# Init RobotsSearchIDOrder required for update process
- push @RobotArrayList,"list1";
- push @RobotArrayList,"list2";
- push @RobotArrayList,"list3";
+ my @RobotArrayList;
+ if ($LevelForRobotsDetection >= 1) { push @RobotArrayList,"list1"; }
+ if ($LevelForRobotsDetection >= 2) { push @RobotArrayList,"list2"; }
+ if ($LevelForRobotsDetection >= 1) { push @RobotArrayList,"list3"; } # Always added
foreach my $key (@RobotArrayList) {
push @RobotsSearchIDOrder,@{"RobotsSearchIDOrder_$key"};
if ($Debug) { debug("Add ".@{"RobotsSearchIDOrder_$key"}." elements from RobotsSearchIDOrder_$key into RobotsSearchIDOrder",2); }
projects / thirdparty / AWStats.git / commitdiff
