+2009-12-13 Vladimir Serbinenko <phcoder@gmail.com>
+
+ * ChangeLog: Remove non-multiboot entries.
+
2009-11-13 Robert Millan <rmh.grub@aybabtu.com>
* autogen.sh: New file.
Based on patch from Ville Skyttä <ville.skytta@iki.fi>
* docs/multiboot.texi: Fix some spelling.
- * docs/internals.texi: Likewise.
- * docs/grub.texi: Likewise.
-
-2008-05-20 Robert Millan <rmh@aybabtu.com>
-
- * netboot/cs89x0.c: Fix license violation.
- * netboot/cs89x0.h: Likewise.
2008-04-10 Pavel Roskin <proski@gnu.org>
* configure.ac: Always use "_cv_" in cache variables for
compatibility with Autoconf 2.62.
-2008-03-28 Robert Millan <rmh@aybabtu.com>
-
- Surpass 1 TiB disk addressing limit. Note: there are no plans to handle
- the 2 TiB disk limit in GRUB Legacy, since that would need considerable
- rework. If you have >2TiB disks, use GRUB 2 instead.
-
- * grub/asmstub.c (biosdisk): Add unsigned qualifier to `sector'.
- * stage2/bios.c (biosdisk): Likewise.
- * stage2/disk_io.c (rawread, devread, rawwrite, devwrite): Likewise.
- * stage2/shared.h (rawread, devread, rawwrite, devwrite): Likewise.
- * lib/device.c (get_drive_geometry): Replace BLKGETSIZE with
- BLKGETSIZE64.
-
2007-10-29 Pavel Roskin <proski@gnu.org>
* configure.ac: Test if '--build-id=none' is supported by the
linker and add it to LDFLAGS if possible. Build ID causes
objcopy to generate huge binary files.
- * aclocal.m4 (grub_PROG_OBJCOPY_ABSOLUTE): Use LDFLAGS when
- linking, so that build ID doesn't break the test.
- * stage1/Makefile.am: Preserve LDFLAGS, use stage1_exec_LDFLAGS.
-
-2007-02-22 Pavel Roskin <proski@gnu.org>
-
- * stage2/iso9660.h: Remove unnecessary packed attributes.
-
-2007-02-22 Robert Millan <rmh@aybabtu.com>
-
- * util/mkbimage: Update my email address, and remove my name from
- some places where unnecessary credit is given.
-
-2006-09-10 Pavel Roskin <proski@gnu.org>
-
- * netboot/natsemi.c: Fix compile error with gcc 4.1.1. Cast
- cannot make a variable volatile - it should be declared as such.
- * netboot/sis900.c: Likewise.
-
-2006-09-08 Pavel Roskin <proski@gnu.org>
-
- * netboot/etherboot.h: Remove incorrect extern declarations of
- the variables later declared static. Move BOOTP_DATA_ADDR ...
- * netboot/main.c: ... here. Eliminate end_of_rfc1533 - it's
- write-only.
2006-06-24 Yoshinori K. Okuji <okuji@enbug.org>
- * docs/grub.texi: Changed the license term to the GNU Free
- Documentation License 1.2.
-
* docs/multiboot.texi: Reformatted to show the license term
and the version number explicitly.
-
- * docs/fdl.texi: New file.
-
- * docs/Makefile.am (grub_TEXINFOS): Added fdl.texi.
-
-2006-06-24 Robert Millan <robertmh@gnu.org>
-
- * lib/device.c (write_to_partition): /dev/ataraid/ and /dev/rd/
- partitions have a "p" prefix. Add it.
-
-2006-06-24 Robert Millan <robertmh@gnu.org>
-
- * lib/device.c (get_i2o_disk_name): New function.
- (init_device_map) [__linux__]: Add support for I2O devices.
-
-2006-05-02 Pavel Roskin <proski@gnu.org>
-
- * stage2/stage2.c (run_menu): Fix "savedefault" to save only top
- level menu positions. Remember current position when calling a
- submenu. Don't recalculate it when booting from a submenu.
-
- * grub/main.c (main): Make sure the boot drive number doesn't
- exceed 255.
-
-2006-05-02 Vesa Jaaskelainen <chaac@nic.fi>
-
- * stage2/shared.h (vbe_mode): Back ported aligment fix from GRUB 2
- to GRUB Legacy. Problem reported by Gerardo Richarte.
-
-2006-04-23 Robert Millan <robertmh@gnu.org>
-
- * grub/asmstub.c (get_diskinfo): Optimize sysctl routine.
-
-2006-04-20 Robert Millan <robertmh@gnu.org>
-
- Fixes for kernel of FreeBSD:
- * grub/asmstub.c (get_diskinfo): Toggle "kern.geom.debugflags" sysctl
- before opening a device for writing.
- * util/grub-install.in: Devices don't have this "r" prefix anymore.
2006-04-16 Yoshinori K. Okuji <okuji@enbug.org>
* docs/multiboot.texi: Correct the offset of address
fields. Reported by Jeroen Dekkers.
-2006-03-21 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c (setup_func): Specify the size of DEVICE to
- grub_strncat instead of a strange number 256. Reported by Vitaly
- Fertman <vitaly@namesys.com>.
-
2005-09-29 Yoshinori K. Okuji <okuji@enbug.org>
* docs/multiboot.texi: Fix a bug in the byte order of
boot_device. I hope this won't affect any OS image.
Increased the version number to 0.6.94.
-2005-09-28 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/boot.c (load_image): Even if an OS image is an ELF
- object, use the a.out kludge if MULTIBOOT_AOUT_KLUDGE is
- specified.
-
-2005-05-08 Yoshinori K. Okuji <okuji@enbug.org>
-
- * configure.ac (AC_INIT): Upgraded to 0.97.
-
- * compile: Copied from Automake 1.9.4.
- * config.guess: Likewise.
- * config.sub: Likewise.
- * depcomp: Likewise.
- * install-sh: Likewise.
- * missing: Likewise.
- * mkinstalldirs: Likewise.
- * mdate-sh: Likewise.
- * docs/texinfo.tex: Likewise.
-
-2005-05-08 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/fsys_xfs.c (next_dentry): Use arrays of arrays instead of
- arrays of pointers for USUAL, to avoid read-only strings. Reported
- by Sven Wegener <swegener@gentoo.org>.
-
-2005-03-28 Yoshinori K. Okuji <okuji@enbug.org>
-
- * lib/device.c (get_drive_geometry): Use ST.ST_SIZE instead of
- ST.ST_BLOCKS to get the total number of sectors, because st_blocks
- is not the same if it is a sparse file.
-
-2005-03-19 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/stage2.c (cmain): Initialize DEFAULT_FILE to an empty
- string. Reported by NATORI Shin <natori@adm.s.u-tokyo.ac.jp>.
-
-2005-03-15 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/fsys_fat.c (fat_mount): Ignore the 3rd bit of a media
- descriptor, because some BIOSes overwrite this value, according
- to the storage mode (e.g. USB Floppy or USB HDD).
-
-2005-02-16 Yoshinori K. Okuji <okuji@enbug.org>
-
- * grub/asmstub.c (grub_stage2): Remove the attribute `volatile'
- from doit. I hope this change is safe for all compilers.
-
-2005-02-15 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c (install_func): If DEST_DRIVE is a hard
- disk, enable the workaround in Stage 1 by replacing the jmp
- with double nop's.
-
- * stage1/stage1.h (STAGE1_BOOT_DRIVE_CHECK): New macro.
- (STAGE1_BOOT_DRIVE_MASK): Removed.
-
- * stage1/stage1.S (boot_drive_check): New label. This implements
- a different workaround for buggy BIOSes which don't pass boot
- drive correctly. This is effective for BIOSes which pass a value
- without the seventh bit (0x80).
- (boot_drive_mask): Removed.
-
-2005-02-03 Yoshinori K. Okuji <okuji@enbug.org>
-
- * grub/asmstub.c (console_current_color): Make it global as
- declared.
- (grub_stage2): Tweak the declaration and the definition of the
- nested function doit.
-
-2005-02-02 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/smp-imps.h (imps_any_new_apics): Removed.
- (imps_enabled): Likewise.
- (imps_lapic_addr): Likewise.
- (imps_num_cpus): Likewise.
- (imps_cpu_apic_map): Likewise.
- (imps_apic_cpu_map): Likewise.
-
- * stage2/Makefile.am (libgrub_a_CFLAGS): Remove
- -fwritable-strings. Not required for the grub shell actually.
-
- * grub/Makefile.am (AM_CFLAGS): Likewise.
-
-2005-02-01 Yoshinori K. Okuji <okuji@enbug.org>
-
- * grub/asmstub.c (grub_stage2): Use auto instead of static for
- nested functions.
-
- * stage2/char_io.c (memcheck) [GRUB_UTIL]: Likewise.
-
- * stage2/builtins.c (blocklist_func): Likewise.
- (color_func): Likewise.
- (install_func): Likewise.
- (setkey_func): Likewise.
-
- * lib/device.c (read_device_map): Likewise.
-
-2005-01-30 Yoshinori K. Okuji <okuji@enbug.org>
-
- * configure.ac (AC_INIT): Upgraded to 0.96.
-
2004-10-11 Jason Thomas <jason@staff.pnc.com.au>
Patch from Stefanus Du Toit <sjdutoit@uwaterloo.ca>
sizeof(module_t), since it's already a pointer of type module_t.
* docs/kernel.c (cmain): Do the same.
-2004-09-20 Yoshinori K. Okuji <okuji@enbug.org>
-
- * docs/internals.texi (Internals): Changed to an appendix.
-
- * docs/grub.texi (@setchapternewpage): Changed to odd from off.
- (@contents): Moved to the beginning.
- (Future): Changed to an appendix.
-
-2004-08-17 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/cmdline.c (run_script): Fix a reversed conditional.
- Reported by Alban Crequy <alban.crequy@apinc.org>.
-
-2004-08-07 Jason Thomas <jason@staff.pnc.com.au>
-
- From Michael Hohnbaum <hohnbaum@us.ibm.com>:
- * stage2/fsys_ext2fs.c (ext2fs_read): Handle sparse files.
-
-2004-07-24 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/stage2.c (cmain): Terminate DEFAULT_FILE with NUL
- correctly. Reported by Alban Crequy <alban.crequy@apinc.org>.
-
-2004-07-21 Robert Millan <robertmh@gnu.org>
-
- Patch from David Weinehall <tao@debian.org>
- * util/mkbimage: Fix XSI-isms (for supporting POSIX-only shells).
-
-2004-07-20 Robert Millan <robertmh@gnu.org>
-
- * util/grub-install.in: Detect GNU/k*BSD systems as well.
-
-2004-07-16 Yoshinori K. Okuji <okuji@enbug.org>
-
- * util/grub-install.in (convert): Fix the sed statement for
- Linux. The expression was ambigious in some cases.
-
-2004-06-29 Robert Millan <robertmh@gnu.org>
-
- * util/grub-set-default.in: Fix minor syntax error (non-escaped
- characters).
-
-2004-06-24 Robert Millan <robertmh@gnu.org>
-
- Fixes for FHS compliance. (/usr/share is for arch-independant data)
- * stage1/Makefile.am: Move stage files to pkglibdir.
- * stage2/Makefile.am: Likewise.
- * docs/grub.texi: s,/usr/share,/usr/lib,g.
- * util/grub-image.in: Look for stage files in pkglibdir.
- * util/grub-install.in: Likewise.
-
- * util/grub-install.in: Improve usage message.
-
-2004-06-20 Yoshinori K. Okuji <okuji@enbug.org>
-
- This is a big change on saving a default entry. This change
- makes it possible to set up a quite robust system using GRUB.
- Now we do not use the second sector of Stage 2 to store an
- entry number but use the file /boot/grub/default. This file
- must be generated by grub-set-default, although this file is
- plain-text.
-
- * util/grub-set-default.in: New file.
-
- * util/grub-install.in (grub_set_default): New variable.
- Use /grub instead of /boot/grub on OpenBSD as well as NetBSD.
- Run grub-set-default to make a default file.
-
- * util/Makefile.am (sbin_SCRIPTS): Added grub-set-default.
-
- * stage2/stage2.c (run_menu): Change the fallback handling to
- support multiple fallback entries.
- (cmain): Likewise. Also, get a saved entry from a default file
- if possible, before reading a config file.
-
- * stage2/shared.h (DEFAULT_FILE_BUF): New macro.
- (DEFAULT_FILE_BUFLEN): Likewise.
- (CMDLINE_BUF): Set to DEFAULT_FILE_BUF + DEFAULT_FILE_BUFLEN.
- (MENU_BUFLEN): Set to 0x8000 + PASSWORD_BUF - MENU_BUF.
- (fallback_entry): Removed.
- (fallback_entries): Declared.
- (fallback_entryno): Likewise.
- (MAX_FALLBACK_ENTRIES): New macro.
-
- * stage2/cmdline.c (run_script): Use FALLBACK_ENTRYNO instead of
- FALLBACK_ENTRY.
-
- * stage2/builtins.c (fallback_entry): Removed.
- (fallback_entryno): New variable.
- (fallback_entries): Likewise.
- (init_config): Initialize FALLBACK_ENTRYNO and FALLBACK_ENTRIES.
- (fallback_func): Rewritten completely.
- (savedefault_func): Likewise.
-
- * docs/grub.texi (grub-set-default): New direntry.
- (Installation): Describe grub-set-default for manual
- installations.
- (Making your system robust): New section.
- (Booting once-only): New subsection.
- (Booting fallback systems): Likewise.
- (fallback): Describe multiple fallback entries.
- (savedefault): Describe an optional argument.
- (Invoking grub-set-default): New chapter.
- (Future): Replaced with a description about GRUB 2.
-
- * configure.ac (AC_CONFIG_FILES): Added util/grub-set-default.
-
-2004-06-19 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/ufs2.h (int8_t): Renamed to ...
- (grub_uint8_t): ... this.
- (int16_t): Renamed to ...
- (grub_int16_t): ... this.
- (int32_t): Renamed to ...
- (grub_int32_t): ... this.
- (int64_t): Renamed to ...
- (grub_int64_t): ... this.
- (uint8_t): Renamed to ...
- (grub_uint8_t): ... this.
- (uint16_t): Renamed to ...
- (grub_uint16_t): ... this.
- (uint32_t): Renamed to ...
- (grub_uint32_t): ... this.
- (uint64_t): Renamed to ...
- (grub_uint64_t): ... this.
- (u_char): Renamed to ...
- (grub_u_char): ... this.
- (u_int): Renamed to ...
- (grub_u_int): ... this.
- (u_int8_t): Renamed to ...
- (grub_u_int8_t): ... this.
- (u_int16_t): Renamed to ...
- (grub_u_int16_t): ... this.
- (u_int32_t): Renamed to ...
- (grub_u_int32_t): ... this.
- (u_int64_t): Renamed to ...
- (grub_u_int64_t): ... this.
- (ino_t): Renamed to ...
- (grub_ino_t): ... this.
- All callers are changed.
-
-2004-06-14 Jeroen Dekkers <jeroen@dekkers.cx>
-
- * stage2/ufs2.h (__uint8_t): Remove.
- (__uint16_t): Likewise.
- (__uint32_t): Likewise.
- (__uint64_t): Likewise.
- (ino_t): Typedef to uint32_t.
-
-2004-06-13 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/Makefile.am (noinst_HEADERS): Added ufs2.h.
-
-2004-06-13 Yoshinori K. Okuji <okuji@enbug.org>
-
- * configure.ac (AC_INIT): Upgraded to 0.95.
-
-2004-05-23 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/char_io.c (grub_isspace): Use a switch sentense instead
- of an if sentense, because that reduces the size.
-
- * lib/device.c (read_device_map): Change the max number of DRIVE
- to 127 from 8. This was too strict.
-
- * stage2/asm.S (stop_floppy): Call pusha and popa outside the
- block of real mode code. Reported by Guillem Jover
- <guillem@debian.org>.
-
-2004-05-20 Damian Ivereigh <damian@cisco.com>
-
- * netboot/main.c: Fixed bootp only code so that options
- work properly. This fix is obvious when compared with the
- DHCP code.
-
-2004-05-17 Pavel Roskin <proski@gnu.org>
-
- * stage2/char_io.c (safe_parse_maxint): Disable for stage 1.5.
- (grub_tolower): Disable for stage 1.5 except fat_stage1_5.
- (grub_memcmp): Disable for stage 1.5 except iso9660_stage1_5.
-
-2004-05-14 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Sergey Matveychuk <sem@ciam.ru>:
- * stage2/size_test: Added a check for ufs2_stage1_5.
-
- * stage2/shared.h (STAGE2_ID_UFS2_STAGE1_5): New macro.
- [FSYS_UFS2] (STAGE2_ID): Set to STAGE2_ID_UFS2_STAGE1_5.
-
- * stage2/filesys.h (FSYS_UFS2_NUM): New macro.
- [FSYS_UFS2] (ufs2_mount): New prototype.
- [FSYS_UFS2] (ufs2_read): Likewise.
- [FSYS_UFS2] (ufs2_dir): Likewise.
- [FSYS_UFS2] (ufs2_embed): Likewise.
- (NUM_FSYS): Added FSYS_UFS2_NUM.
-
- * stage2/disk_io.c (fsys_table): Added an ufs2 entry.
-
- * stage2/builtins.c (setup_func): Added ufs2 into the
- STAGE1_5_MAP.
-
- * stage2/Makefile.am (libgrub_a_SOURCES): Added fsys_ufs2.c.
- (libgrub_a_CFLAGS): Added -DFSYS_UFS2=1.
- (pkgdata_DATA): Added ufs2_stage1_5.
- (noinst_PROGRAMS): Added ufs2_stage1_5.exec.
- (ufs2_stage1_5_exec_SOURCES): New variable.
- (ufs2_stage1_5_exec_CFLAGS): Likewise.
- (ufs2_stage1_5_exec_CCASFLAGS): Likewise.
- (ufs2_stage1_5_exec_LDFLAGS): Likewise.
-
- * grub/Makefile.am (AM_CPPFLAGS): Added -DFSYS_ISO9660=1,
- -DFSYS_JFS=1, -DFSYS_REISERFS=1, -DFSYS_UFS2=1, -DFSYS_VSTAFS=1,
- -DFSYS_XFS=1, and -DUSE_MD5_PASSWORDS=1.
-
- * configure.ac (--disable-ufs2): New option.
-
- * stage2/fsys_ufs2.c: New file.
- * stage2/ufs2.h: Likewise.
-
-2004-05-10 Robert Millan <robertmh@gnu.org>
-
- * lib/device.c: Mangle __FreeBSD_* macro usage to support
- kFreeBSD-based non-FreeBSD systems (i.e. GNU/kFreeBSD).
-
- Implement runtime detection of version of kFreeBSD. Now if
- we build against kFreeBSD 5.x headers the GRUB shell will work on
- both 4.x and 5.x.
-
- Replace `u_int_t' types with portable `unsigned int' and old
- reference to `geometry' structure to new `geom' one.
-
- * docs/menu.lst: Split GNU/kFreeBSD and GNU/kNetBSD as separate
- options than FreeBSD and NetBSD, respectively. There are minor
- differences now (different paths).
-
-2004-05-03 Pavel Roskin <proski@gnu.org>
-
- * stage2/char_io.c (convert_to_ascii): Remove "%b" support.
- It's non-standard and is not used anymore.
- (grub_printf): Likewise.
-
-2004-04-29 Robert Millan <robertmh@gnu.org>
-
- From Yann Dirson <dirson@debian.org>:
- * util/mkbimage: Misc syntax fixes.
-
-2004-04-29 Jeroen Dekkers <jeroen@dekkers.cx>
-
- * stage2/char_io.c (grub_memcmp): Define for stage1.5 too.
-
- * stage2/fsys_iso9660.c (iso9660_mount): Use memcmp() instead of
- __builtin_memcmp().
- (iso9660_dir): Likewise.
-
-2004-04-26 Christian Jones <chjones@aleph0.com>
-
- * docs/grub.texi (Making a GRUB bootable CD-ROM): minor edits,
- including a few compatibility notes and a change to
- -boot-load-size 4 for the mkisofs command.
-
2004-04-22 Jeroen Dekkers <jeroen@dekkers.cx>
* Makefile.am (AUTOMAKE_OPTIONS): Add "gnu".
* configure.ac: Update to work with automake 1.8, quote all
AC_DEFUN's correctly and provide descriptions for AC_DEFINE's.
- * acinclude.m4: Likewise.
- * acconfig.h: Removed.
-
- * stage1/Makefile.am (.exec): Use suffix rules instead of pattern
- rules.
- * stage2/Makefile.am (.exec): Likewise.
-
-2004-04-18 Yoshinori K. Okuji <okuji@enbug.org>
-
- * docs/grub.texi (Making a GRUB bootable CD-ROM): New section.
-
- * stage2/disk_io.c (set_device): Use CH instead of *DEVICE to
- test the first character of DEVICE, because DEVICE is
- incremented.
- Reported by Bernhard Treutwein.
-
-2004-04-15 Yoshinori K. Okuji <okuji@enbug.org>
-
- * netboot/fsys_tftp.c (buf_fill): Cast 1 to unsigned short
- explicitly so that the constant doesn't extend unsigned short
- to int automatically.
- Reported by Eduard Guzovsky <eguzovsk@enterasys.com>.
-
- * docs/grub.texi (Invoking grub-md5-crypt): Fixed the chapter
- name.
- Reported by Martin Pool <mbp@sourcefrog.net>.
-2004-04-04 Yoshinori K. Okuji <okuji@enbug.org>
-
- * configure.ac (STAGE2_CFLAGS): Check if -fno-stack-protector is
- supported by GCC. If yes, added the option. This is necessary
- for OpenBSD, because the stack protector defines additional
- symbols. Reported by uc.sheda <uc.sheda@laposte.net>.
-
-2004-03-28 Pavel Roskin <proski@gnu.org>
-
- * stage2/boot.c: Imply --no-mem-option for Linux kernels with
- protocol version 2.03 and above (Linux 2.4.18 and newer).
-
-2004-03-27 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/char_io.c [!GRUB_UTIL] (memcpy): New function. It is
- defined as an alias of grub_memmove. This is copied from GRUB 2.
-
- * stage2/disk_io.c (print_completions): Simplified conditionals
- to make it easier to edit the file with Emacs.
- Added support for (cd).
- (set_device): Likewise.
-
- * stage2/common.c (init_bios_info): Check if BOOT_DRIVE is a
- CDROM drive. If it is true, set CDROM_DRIVE to BOOT_DRIVE.
- (cdrom_drive): New variable.
+2003-10-19 Yoshinori K. Okuji <okuji@enbug.org>
- From Leonid Lisovskiy <lly@pisem.net>:
- * stage2/start_eltorito.S: New file.
+ Migrated to newer autotools.
- * stage2/stage2.c (run_menu): Use GRUB_INVALID_DRIVE instead of
- 0xFF.
+ * configure.in: Removed.
+ * configure.ac: New file. Mostly derived from configure.in.
- * stage2/shared.h (STAGE2_ID_ISO9660_STAGE1_5): New macro.
- [FSYS_ISO9660] (STAGE2_ID): Set to STAGE2_ID_ISO9660_STAGE1_5.
- (struct geometry): Added a new member ``sector_size''.
- (BIOSDISK_FLAG_CDROM): New macro.
- (cdrom_drive): Declared.
+2002-07-01 Yoshinori K. Okuji <okuji@enbug.org>
- * stage2/fsys_iso9660.c: New file.
- * stage2/iso9660.h: Likewise.
+ * Makefile.am (AUTOMAKE_OPTIONS): New variable. Specify the
+ required Automake version explicitly.
- * stage2/filesys.h (FSYS_ISO9660_NUM): New macro.
- [FSYS_ISO9660] (iso9660_mount): Declared.
- [FSYS_ISO9660] (iso9660_read): Likewise.
- [FSYS_ISO9660] (iso9660_dir): Likewise.
- (NUM_FSYS): Added FSYS_ISO9660_NUM.
+2002-05-23 Yoshinori K. Okuji <okuji@enbug.org>
- * stage2/disk_io.c (fsys_table) [FSYS_ISO9660]: Added iso9660.
- (current_drive): Use GRUB_INVALID_DRIVE.
- (log2): New function.
- (rawread): Use BUF_GEOM.SECTOR_SIZE instead of SECTOR_SIZE.
- Change the type of BUFADDR from int to char *.
- Use a virtual track to make sure that one track fits in the
- buffer.
- (sane_partition): Allow CURRENT_DRIVE to be CDROM_DRIVE, because
- a bios drive for a CD-ROM is often assigned to greater than
- 0x88.
- (set_device): Use GRUB_INVALID_DRIVE instead of 0xFF.
- (setup_part): Likewise.
+ Define the behavior of the boot loader when the load end address
+ and the bss end address are zero in the Multiboot Specification,
+ and add the support into GRUB. I've modified a patch from Yuri
+ Zaporogets <yuriz@ukr.net>.
- * stage2/cmdline.c (init_cmdline): Use GRUB_INVALID_DRIVE.
+ * docs/multiboot.texi (The address fields of Multiboot header):
+ Added descriptions about the behavior of the boot loader when
+ LOAD_END_ADDR is zero and BSS_END_ADDR is zero.
- * stage2/builtins.c (install_func): Use GRUB_INVALID_DRIVE.
- (setup_func): Added iso9660_stage1_5.
+2001-03-03 OKUJI Yoshinori <okuji@gnu.org>
- * stage2/bios.c (biosdisk): Don't fall back to the CHS mode
- if the drive is a CDROM.
- (get_cdinfo): New function.
- (get_diskinfo): Call get_cdinfo if the drive is greater than or
- equal to 0x88 or the drive supports LBA.
- Set the sector size to SECTOR_SIZE if it is not a CD-ROM.
+ * docs/multiboot.texi (History): Written.
- * stage2/asm.S (biosdisk_int13_extensions): Take a word
- argument AX instead of a byte argument AH.
- (get_diskinfo_int13_extensions): Removed.
+2001-01-27 OKUJI Yoshinori <okuji@gnu.org>
- * stage2/Makefile.am (noinst_HEADERS): Added iso9660.h.
- (libgrub_a_SOURCES): Added fsys_iso9660.c.
- (libgrub_a_CFLAGS): Added -DFSYS_ISO9660=1.
- (pkgdata_DATA): Added iso9660_stage1_5 and stage2_eltorito.
- (noinst_PROGRAMS): Added iso9660_stage1_5.exec and
- start_eltorito.exec.
- (noinst_DATA): Added start_eltorito.
- (pre_stage2_exec_SOURCES): Added fsys_iso9660.c.
- (START_ELTORITO_LINK): New variable.
- (start_eltorito_exec_SOURCES): Likewise.
- (start_eltorito_exec_CCASFLAGS): Likewise.
- (start_eltorito_exec_LDFLAGS): Likewise.
- (start_eltorito_exec-start.$(OBJEXT)): New dependency.
- (stage2_eltorito): New target.
- (iso9660_stage1_5_exec_SOURCES): New variable.
- (iso9660_stage1_5_exec_CFLAGS): Likewise.
- (iso9660_stage1_5_exec_CCASFLAGS): Likewise.
- (iso9660_stage1_5_exec_LDFLAGS): Likewise.
+ * docs/multiboot.texi: Start reorganizing Multiboot
+ Specification.
- * stage1/stage1.h (GRUB_INVALID_DRIVE): New macro.
+2001-01-12 OKUJI Yoshinori <okuji@gnu.org>
- * stage1/stage1.S (boot_drive): Use the macro GRUB_INVALID_DRIVE.
- (real_start): Likewise.
+ * docs/multiboot.h [__ELF__] (MULTIBOOT_HEADER_FLAGS): Defined
+ as 0x00000003 instead of 0x00010003.
+ * docs/boot.S (multiboot_header) [__ELF__]: Don't define a.out
+ kludge information.
- * lib/device.c (get_drive_geometry): Set GEOM->SECTOR_SIZE to
- SECTOR_SIZE by default.
+ * docs/Makefile.am (EXTRA_PROGRAMS): New variable.
+ [BUILD_EXAMPLE_KERNEL] (noinst_DATA): Removed.
+ [BUILD_EXAMPLE_KERNEL] (noinst_PROGRAMS): Changed to kernel.
+ [BUILD_EXAMPLE_KERNEL] (kernel_exec_SOURCES): Renamed to ...
+ [BUILD_EXAMPLE_KERNEL] (kernel_SOURCES): ... this.
+ [BUILD_EXAMPLE_KERNEL] (kernel_exec_CFLAGS): Renamed to ...
+ [BUILD_EXAMPLE_KERNEL] (kernel_CFLAGS): ... this.
+ [BUILD_EXAMPLE_KERNEL] (kernel_exec_LDFLAGS): Renamed to ...
+ [BUILD_EXAMPLE_KERNEL] (kernel_LDFLAGS): ... this.
+ [BUILD_EXAMPLE_KERNEL] (kernel): Removed.
+ [BUILD_EXAMPLE_KERNEL] (boot.o): New dependency.
+ (CLEANFILES): New variable.
- * configure.ac (--disable-iso9660): New option.
+2001-01-11 OKUJI Yoshinori <okuji@gnu.org>
-2004-03-13 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Daniele Zelante <zeldan@email.it>:
- * stage2/asm.S (stop_floppy): Use INT 13, AH=00h to stop the
- floppy controller instead of a direct I/O.
+ * docs/Makefile.am [BUILD_EXAMPLE_KERNEL] (noinst_DATA): New
+ variable.
+ [BUILD_EXAMPLE_KERNEL] (noinst_PROGRAMS): Likewise.
+ [BUILD_EXAMPLE_KERNEL] (kernel_exec_SOURCES): Likewise.
+ [BUILD_EXAMPLE_KERNEL] (kernel_exec_CFLAGS): Likewise.
+ [BUILD_EXAMPLE_KERNEL] (kernel_exec_LDFLAGS): Likewise.
+ [BUILD_EXAMPLE_KERNEL] (kernel): New target.
+ * configure.in (--enable-example-kernel): New option.
-2004-03-12 Yoshinori K. Okuji <okuji@enbug.org>
+ * docs/kernel.c (cmain): Cast unsigned long variables to
+ unsigned explicitly, to suppress GCC warnings.
- * stage2/serial.c (serial_putchar): Handle the character code
- 127 as a backspace. Reported by Florian Engelhardt
- <f.engelhardt@gmx.net>.
+2000-10-23 OKUJI Yoshinori <okuji@gnu.org>
-2004-03-12 Yoshinori K. Okuji <okuji@enbug.org>
+ * docs/multiboot.texi: Upgraded to 0.6.92.
+ (Boot information format): Re-designed the graphics table.
- From Boji Tony Kannanthanam <boji.t.kannanthanam@intel.com>:
- * util/grub-install.in (convert): Add support for ATARAID
- device names.
- * lib/device.c (get_ataraid_disk_name) [__linux__]: New
- function.
- (init_device_map) [__linux__]: Probe ATARAID disks.
+2000-10-20 OKUJI Yoshinori <okuji@gnu.org>
- * stage2/size_test (check): Don't use the local statement any
- longer. It was unneeded actually. Reported by Paul Jarc.
+ APM BIOS table support is added, based on a patch by Matt Yourst
+ <yourst@mit.edu>.
-2004-03-12 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Sergey Matveychuk <sem@ciam.ru>:
- * lib/device.c (get_drive_geometry): Do not open the same device
- more than once unnecessarily.
- (get_drive_geometry) [__FreeBSD_version >= 500040]: Use new
- ioctl methods.
- (get_floppy_disk_name) [__FreeBSD__ >= 4]: Use /dev/fd%d rather
- than /dev/rfd%d.
- (get_ide_disk_name) [__FreeBSD__ >= 4]: Use /dev/ad%d rather
- than /dev/rad%d.
- (get_scsi_disk_name) [__FreeBSD__ >= 4]: Use /dev/da%d rather
- than /dev/rda%d.
- * grub/asmstub.c (get_diskinfo): Check if ERRNO is EPERM as
- well.
+ * docs/multiboot.texi (Boot information format): Added the
+ definition of APM table format.
-2004-02-28 Jeroen Dekkers <jeroen@dekkers.cx>
+2000-10-16 OKUJI Yoshinori <okuji@gnu.org>
- * docs/grub.texi (partnew): Change @var{to} to @var{len}.
+ Some of the new Multiboot features are supported. APM support
+ and VESA support are not strictly defined or implemented yet.
-2004-02-18 Yoshinori K. Okuji <okuji@enbug.org>
+ * docs/multiboot.texi (Top): Increase the version number.
+ (Boot information format): Changed the drive information format,
+ because it was not straightforward.
- From Yury V. Umanets <umka@namesys.com>:
- * stage2/fsys_reiserfs.c (REISER3FS_SUPER_MAGIC_STRING): New
- macro.
- (reiserfs_mount): Added checks for ReiserFS 3.
- (reiserfs_embed): Likewise.
+2000-02-11 OKUJI Yoshinori <okuji@gnu.org>
-2004-01-25 Yoshinori K. Okuji <okuji@enbug.org>
+ From Per Lundberg <plundis@byggdok.se>:
+ * docs/multiboot.texi: Added graphics support.
- * docs/grub.texi (Obtaining and Building GRUB): Instead of
- describing how to use the anoncvs method, specify the URL of
- the description page on Savannah.
- Reported by Bernhard Treutwein.
+2000-02-10 OKUJI Yoshinori <okuji@gnu.org>
-2004-01-18 Yoshinori K. Okuji <okuji@enbug.org>
+ * docs/multiboot.texi (Top): Downgrade the version to 0.6.90,
+ since we need more work to release it as 0.7.
- From Thomas Schwinge <kischde@gmx.net>:
- * grub/Makefile.am (AM_CPPFLAGS): New variable.
- (AM_CFLAGS): Removed all cpp flags.
+2000-01-03 OKUJI Yoshinori <okuji@gnu.org>
- * stage2/xfs.h (__int8_t): Renamed to ...
- (xfs_int8_t): ... this.
- (__uint8_t): Renamed to ...
- (xfs_uint8_t): ... this.
- (__int16_t): Renamed to ...
- (xfs_int16_t): ... this.
- (__uint16_t): Renamed to ...
- (xfs_uint16_t): ... this.
- (__int32_t): Renamed to ...
- (xfs_int32_t): ... this.
- (__uint32_t): Renamed to ...
- (xfs_uint32_t): ... this.
- (__int64_t): Renamed to ...
- (xfs_int64_t): ... this.
- (__uint64_t): Renamed to ...
- (xfs_uint64_t): ... this.
- All callers are changed.x
+ * docs/multiboot.texi (Boot information format): Added the
+ descriptions about the fields "config_table" and
+ "boot_loader_name".
- From Egmont Koblinger <egmont@uhulinux.hu>:
- * util/grub-install.in: Support an install devices in GRUB's
- notation without parentheses.
+1999-12-31 OKUJI Yoshinori <okuji@gnu.org>
- * docs/grub.texi (Installing GRUB using grub-install): Added an
- example of using grub-install without parentheses.
+ * docs/src2texi: Added an extra space into the first line, for
+ the portability issue.
-2004-01-18 Yoshinori K. Okuji <okuji@enbug.org>
-
- * util/grub-install.in: Use the first word of GRUB_SHELL when
- checking if the grub shell is present. This is necessary to
- support options to the grub shell (e.g. grub --read-only).
+1999-11-05 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
- From Eric Kvaalen <E_Kvaalen.Arnesen@noos.fr>:
- * docs/grub.texi: Many bug fixes.
+ * docs/multiboot.texi (Boot information format): Add the members
+ `drives_addr' and `drives_count' into the Multiboot information
+ structure, and added the descriptions.
-2004-01-17 Yoshinori K. Okuji <okuji@enbug.org>
+1999-10-27 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
- * lib/device.c [__linux__] (MAJOR): Support 32 bit and 64 bit
- dev_t. This code is stolen from glibc.
- Suggested by Shen Feng <shen@nanjing-fnst.com>.
+ * docs/help2man: Upgraded to 1.016.
-2004-01-11 Yoshinori K. Okuji <okuji@enbug.org>
+1999-10-20 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
- * stage2/terminfo.c (ti_set_term): Use a pointer to struct
- terminfo instead to avoid GCC's bug, which inserts a reference
- to memcpy implicitly.
- (ti_get_term): Likewise.
- All callers are fixed.
+ * docs/Makefile.am (%.c.texi): Use $(SHELL) instead of /bin/sh.
+ (%.h.texi): Likewise.
+ (%.S.texi): Likewise.
- * stage2/terminfo.h (ti_set_term): Updated.
- (ti_get_term): Likewise.
+1999-10-17 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
- * stage2/shared.h (struct linux_kernel_header): New member,
- initrd_max_address. Defined in the boot protocol 2.03 or higher.
+ * docs/Makefile.am (.texi): Canceled because the dependecies can
+ be circulated.
- * stage2/boot.c (load_initrd): If the boot protocol is greater
- than or equal to 2.03, use the field ``initrd_max_address''
- instead of LINUX_INITRD_MAX_ADDRESS.
+1999-10-16 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-2003-12-30 Yoshinori K. Okuji <okuji@enbug.org>
+ * docs/multiboot.texi: Include the example source files of a
+ Multiboot kernel.
+ * docs/src2texi: New file.
+ * docs/boot.S: Likewise.
+ * docs/multiboot.h: Likewise.
+ * docs/kernel.c: Likewise.
+ * docs/boot.S.texi: Likewise.
+ * docs/multiboot.h.texi: Likewise.
+ * docs/kernel.c.texi: Likewise.
+ * docs/Makefile.am (EXAMPLES): New varilable.
+ (multiboot_TEXINFOS): Likewise.
+ (SRC2TEXI): Likewise.
+ (noinst_SCRIPTS): Added $(SRC2TEXI).
+ (EXTRA_DIST): Added $(EXAMPLES) and $(multiboot_TEXINFOS).
+ (%.c.texi): New target.
+ (%.h.texi): Likewise.
+ (%.S.texi): Likewise.
- * stage2/fsys_ext2fs.c (ext2_is_fast_symlink): New function.
- (ext2fs_dir): Use ext2_is_fast_symlink to check if the current
- inode is a fast or slow symlink. This change was required
- because Linux now uses acl seriously (i.e. incompatibility).
- Reported by Chris PeBenito <pebenito@gentoo.org> and Seemant
- Kulleen <seemant@gentoo.org>
+1999-09-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-2003-11-30 Yoshinori K. Okuji <okuji@enbug.org>
+ * configure.in (--enable-maintainer-mode): Do not use our own
+ rule, but use AM_MAINTAINER_MODE instead. If the maintainer mode
+ is enabled, then check for perl, and if it is not found, print
+ an error message and abort.
+ * docs/Makefile.am (grub.8): Regenerated if MAINTAINER_MODE is
+ defined, instead of GRUB_MAINT. Use the variable PERL rather
+ than running help2man directly.
- * lib/device.c (read_device_map) (sho_warning): New internal
- function.
- (read_device_map): If DRIVE is greater than 8, emit a warning
- and ignore the drive, rather than exiting abnormally.
- Reported by Greg Newby <newby@arsc.edu>.
-
-2003-10-19 Yoshinori K. Okuji <okuji@enbug.org>
-
- Migrated to newer autotools. Also, don't install mkbimage
- because its name is too general and it does not conform to the
- GNU Coding Standards in some points.
-
- * util/Makefile.am (EXTRA_DIST): New variable.
- (sbin_SCRIPTS): Removed mkbimage.
- (noinst_SCRIPTS): Added mkbimage.
-
- * stage1/Makefile.am (AM_ASFLAGS): Renamed to ...
- (AM_CCASFLAGS): ... this.
-
- * stage2/Makefile.am (pre_stage2_exec_ASFLAGS): Renamed to ...
- (pre_stage2_exec_CCASFLAGS): ... this.
- (start_exec_ASFLAGS): Renamed to ...
- (start_exec_CCASFLAGS): ... this.
- (e2fs_stage1_5_exec_ASFLAGS): Renamed to ...
- (e2fs_stage1_5_exec_CCASFLAGS): ... this.
- (fat_stage1_5_exec_ASFLAGS): Renamed to ...
- (fat_stage1_5_exec_CCASFLAGS): ... this.
- (ffs_stage1_5_exec_ASFLAGS): Renamed to ...
- (ffs_stage1_5_exec_CCASFLAGS): ... this.
- (minix_stage1_5_exec_ASFLAGS): Renamed to ...
- (minix_stage1_5_exec_CCASFLAGS): ... this.
- (reiserfs_stage1_5_exec_ASFLAGS): Renamed to ...
- (reiserfs_stage1_5_exec_CCASFLAGS): ... this.
- (vstafs_stage1_5_exec_ASFLAGS): Renamed to ...
- (vstafs_stage1_5_exec_CCASFLAGS): ... this.
- (jfs_stage1_5_exec_ASFLAGS): Renamed to ...
- (jfs_stage1_5_exec_CCASFLAGS): ... this.
- (xfs_stage1_5_exec_ASFLAGS): Renamed to ...
- (xfs_stage1_5_exec_CCASFLAGS): ... this.
- (diskless_exec_ASFLAGS): Renamed to ...
- (diskless_exec_CCASFLAGS): ... this.
- (nbloader_exec_ASFLAGS): Renamed to ...
- (nbloader_exec_CCASFLAGS): ... this.
- (pxeloader_exec_ASFLAGS): Renamed to ...
- (pxeloader_exec_CCASFLAGS): ... this.
-
- * configure.in: Removed.
- * configure.ac: New file. Mostly derived from configure.in.
-
-2003-10-19 Yoshinori OKUJI <okuji@enbug.org>
-
- From KB Sriram <mail_kb@yahoo.com>:
- * stage2/disk_io.c (set_device) [SUPPORT_NETBOOT]: Added support
- for a completion of a network device.
- (print_completions): Likewise.
-
-2003-10-10 Robert Millan <robertmh@gnu.org>
-
- * config.guess: Update from official source (CVS).
- * config.sub: Likewise.
-
-2003-09-18 Robert Millan <robertmh@gnu.org>
-
- * docs/texinfo.tex: Update from ftp.gnu.org.
-
-2003-09-05 KB Sriram <mail_kb@yahoo.com>
-
- * stage2/fsys_fat.c: Fix missdetection of ext2fs as fatfs.
-
-2003-09-05 Robert Millan <robertmh@gnu.org>
-
- * docs/menu.lst (GNU/Linux): Add commented initrd command, which
- is consistent with documentation.
-
-2003-09-01 Robert Millan <robertmh@gnu.org>
-
- * docs/menu.lst: Add NetBSD, OpenBSD, GNU/KFreeBSD and
- GNU/KNetBSD.
-
-2003-08-13 Jason Thomas <jason@intology.com.au>
-
- * util/grub-install.in (resolve_symlink): New function to
- resolve symlinks.
- (find_device): Moved symlink code to new function.
- Before we convert the install_device we attempt to resolve it if
- its a symlink using the new function.
- * util/mbchk.c (check_multiboot): The sense of an error message
- was inverted.
- Reported by Timothy Baldwin <T.E.Baldwin99@members.leeds.ac.uk>.
-
-2003-08-12 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/fsys_reiserfs.c (read_tree_node): Fixed a typo; only
- matters for very large fs when tree doesn't fit in cache.
- (IH_KEY_OFFSET): Don't check for INFO->version. There are
- actually old version file systems that use new version items.
- (IH_KEY_ISTYPE): Likewise.
- (reiserfs_dir): Likewise.
-
-2003-08-09 Thierry Laronde <tlaronde@polynum.org>
-
- * util/mkbimage: New File. `mkbimage' depends on GRUB and
- existed elsewhere. It is now part of GRUB so that people can
- fix/contribute.
- * util/Makefile.am (sbin_SCRIPTS): Added script `mkbimage'
-
-2003-08-01 Jason Thomas <jason@intology.com.au>
-
- * util/grub-install.in: support --no-floppy
- This allow users to specify the --no-floppy option which
- is passed onto the grub shell, so it does not probe the floppy
- drive.
- Patch from kesha@diedas.soften.ktu.lt
-
-2003-06-17 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/fsys_reiserfs.c (reiserfs_mount): Clear the node cache.
- This fixes a problem where files from other partitions appear at
- the wrong partition. Problem reported by Johan Regin.
-
-2003-05-04 Yoshinori K. Okuji <okuji@enbug.org>
-
- * docs/grub.texi (partnew): Fixed the inconsistency between the
- implementation and the documentation. The last argument is the
- length instead of the ending address.
- Reported by Daniel Farrell <s2108287@student.rmit.edu.au>.
-
-2003-03-19 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Adam Lackorzynski <adam@os.inf.tu-dresden.de>:
- * stage2/shared.h (KEY_NPAGE): Changed to 0x5100.
- (KEY_PPAGE): Changed to 0x4900.
-
-2003-03-19 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/boot.c (load_image): Check if DATA_LEN plus SECTOR_SIZE
- is less than or equal to MULTIBOOT_SEARCH, instead of if
- DATA_LEN is less than or equal to MULTIBOOT_SEARCH.
- Reported by Neelkanth Natu <neelnatu@yahoo.com>.
-
-2003-03-10 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Andrew Walrond <andrew@walrond.org>:
- * stage2/fsys_reiserfs.c (struct reiserfs_journal_header):
- Remove an unnecessary ``long''.
-
-2003-03-10 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Tilmann Bubeck:
- * stage2/builtins.c [SUPPORT_SERIAL] (terminfo_func): Unescape
- arguments before copying them, and escape sequences before
- printing them.
- * stage2/terminfo.h (TERMINFO_LEN): Changed to 40.
-
-2003-02-20 Yoshinori K. Okuji <okuji@enbug.org>
-
- * util/grub-install.in (find_device): Fix the sed script.
-
-2003-02-17 Yoshinori K. Okuji <okuji@enbug.org>
-
- * lib/device.c (check_device): If DEVICE is empty, just return
- 1.
- (get_scsi_disk_name) [__QNXNTO__]: Make NAME empty, because SCSI
- disks are detected as IDE disks on QNX RTP.
-
- From Taketo Kabe <kabe@sra-tohoku.co.jp>:
- * lib/device.c (get_ide_disk_name) [__QNXNTO__]: Set NAME to
- "/dev/hdX".
- (get_floppy_disk_name) [__QNXNTO__]: Set NAME to "/dev/fdX".
- * stage2/mb_info.h (struct AddrRangeDesc): Specified with the
- attribute packed.
- * stage2/shared.h (struct mmar_desc): Likewise.
-
-2003-01-29 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Ilguiz Latypov:
- * configure.in: Fix a syntax error in a sed script.
- * stage2/bios.c (get_diskinfo): PhoenixBIOS 4.0 Revision 6.0
- for ZF Micro might understand the greater buffer size for the
- "get drive parameters" int 0x13 call in its own way.
- Supposedly the BIOS assumes even bigger space is available and
- thus corrupts the stack. This is why we specify the exactly
- necessary size of 0x42 bytes.
-
-2003-01-25 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Steven Dick <ssd.gnu@mmae.ucf.edu>:
- * stage2/pc_slice.h (PC_SLICE_TYPE_DELL_UTIL): New macro.
- (IS_PC_SLICE_TYPE_FAT): Recognize PC_SLIDE_TYPE_DELL_UTIL as
- well.
-
-2003-01-25 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Karsten Scheibler <karsten.scheibler@student.uni-halle.de>:
- * stage2/terminfo.c (term): Don't use a C99-style initializer.
-
-2003-01-16 Yoshinori K. Okuji <okuji@enbug.org>
-
- From H.J. Lu <hjl@gnu.org>:
- * stage2/disk_io.c (part_start): Use unsigned long to support
- large disks.
- (part_length): Likewise.
- * stage2/shared.h (part_start): Likewise.
- (part_length): Likewise.
-
-2003-01-05 Yoshinori K. Okuji <okuji@enbug.org>
-
- * configure.in (CFLAGS): When the default CFLAGS is used,
- eliminate -O2 and -g from CFLAGS, because Autoconf may
- automatically set CFLAGS to them.
-
-2003-01-02 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Jeremy Katz:
- * configure.in: Support building on x86_64 with gcc -m32.
-
-2003-01-02 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Jeremy Katz:
- * stage2/fsys_ext2fs.c (ext2fs_dir): Initialize STR_CHK to shut
- up GCC.
- * stage2/fsys_minix.c (minix_dir): Likewise.
-
-2002-12-21 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/asm.S (gateA20): First, try a BIOS call (INT 15H,
- AX=2400/2401). Use the keyboard controller, only if that failed.
-
-2002-12-11 Yoshinori K. Okuji <okuji@enbug.org>
-
- Add a workaround for buggy BIOSes which don't pass boot drive
- correctly. The idea is that GRUB forces the fixed disk flag
- when booted from a hard disk. When BIOS loads GRUB directly,
- the boot drive must be either of 0x00 and 0x80, so this should
- work, if those BIOSes always pass zero to %dl. AFAIK, this
- assumption is always correct.
-
- * stage2/builtins.c (install_func): Store the fixed disk flag of
- the destination drive in BOOT_DRIVE_MASK in Stage 1.
-
- * stage1/stage1.h (STAGE1_BOOT_DRIVE_MASK): New macro.
-
- * stage1/stage1.S (boot_drive_mask): New variable. It is or'ed
- to %dl.
-
-2002-12-09 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/char_io.c (init_page): Change the software name from
- "GRUB" to "GNU GRUB". This was inaccurate. Reported by Ciaran
- O'Riordan <coriordan@compsoc.com>.
-
-2002-12-04 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c (embed_func): When checking if the disk can
- store Stage 1.5, check every partition, if it isn't empty.
-
-2002-12-04 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/stage2.c (print_entry): Put a right arrow, if the entry
- is longer than 71 characters. Reported by Pavel Roskin.
-
-2002-12-04 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/disk_io.c (set_device): If '(n' is given, add 'd' into
- DEVICE. Reported by Pavel Roskin.
-
-2002-12-03 Yoshinori K. Okuji <okuji@enbug.org>
-
- Change the terminal structure a bit, to turn the cursor state
- explicitly. Suggested by Pavel Roskin.
-
- * stage2/term.h (struct term_entry): Remove the member
- `nocursor' and add `setcursor'.
- [!STAGE1_5] (console_setcursor): New prototype.
- [SUPPORT_HERCULES] (hercules_setcursor): Likewise.
- [!STAGE1_5] (console_nocursor): Removed.
- [SUPPORT_HERCULES] (hercules_nocursor): Likewise.
-
- * stage2/stage2.c (run_menu): Call setcursor instead of
- nocursor.
- Call setcursor with 1 before starting a boot entry.
-
- * stage2/shared.h (nocursor): Removed.
- (setcursor): New prototype.
-
- * stage2/hercules.c (herc_cursor_state): New variable.
- (herc_turn_cursor): Removed.
- (hercules_nocursor): Likewise.
- (hercules_setcursor): New function.
-
- * stage2/char_io.c (get_cmdline): Turn on the cursor at the
- beginning, and restore it before returning.
- (nocursor): Removed.
- (setcursor): New function.
-
- * stage2/asm.S (console_cursor_state): New variable.
- (console_cursor_shape): Likewise.
- (console_setcursor): New function.
- (console_nocursor): Removed.
-
- * grub/asmstub.c (console_setcursor): New function.
- (hercules_setcursor): Likewise.
- (console_nocursor): Removed.
- (hercules_nocursor): Likewise.
-
-2002-12-03 Yoshinori K. Okuji <okuji@enbug.org>
-
- * docs/grub.texi (terminfo): Fix a misleading English sentence.
- Reported by Pavel Roskin.
- * stage2/builtins.c (builtin_terminfo): Likewise.
-
-2002-12-01 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Alexander Langer <alex@big.endian.de>:
- * stage2/freebsd.h (RB_GDB): New macro.
- (RB_MUTE): Likewise.
- (RB_MULTIPLE): Likewise.
-
- * stage2/boot.c (bsd_boot): Set the bits of RB_MULTIPLE, RB_GDB
- and RB_MUTE when "-D", "-g" and "-m" are specified,
- respectively.
-
-2002-12-01 Yoshinori K. Okuji <okuji@enbug.org>
-
- * docs/grub.texi (Reporting bugs): Specify the project page of
- the BTS instead of the BTS itself.
-
-2002-11-30 Yoshinori K. Okuji <okuji@enbug.org>
-
- * docs/Makefile.am (man_MANS): Added grub-terminfo.8.
- ($(srcdir)/grub_terminfo.8): New target.
- * utils/grub-terminfo.in: New file.
- * util/Makefile.am (sbin_SCRIPTS): Added grub-terminfo.
- * configure.in (AC_OUTPUT): Added util/grub-terminfo.
-
- * docs/grub.texi (terminfo): New subsection.
- (Invoking grub-terminfo): New chapter.
-
- From Tilmann Bubeck <t.bubeck@reinform.de>:
- * stage2/Makefile.am (noinst_HEADERS): Added terminfo.h and
- tparm.h.
- (libgrub_a_SOURCES): Added terminfo.c and tparm.c.
- (pre_stage2_exe_SOURCES): Likewise.
- * stage2/terminfo.c: New file.
- * stage2/terminfo.h: Likewise.
- * stage2/tparm.c: Likewise.
- * stage2/tparm.h: Likewise.
- * stage2/stage2.c (get_line_from_config): Fix handling of
- backslashes.
- * stage2/char_io.c (grub_putstr): New function.
- (grub_printf): Use grub_putstr.
- (substring): Add const into both arguments.
- * stage2/builtins.c [SUPPORT_SERIAL]: Include terminfo.h.
- [SUPPORT_SERIAL] (terminfo_func): New function.
- [SUPPORT_SERIAL] (builtin_terminfo): New variable.
- (builtin_table) [SUPPORT_SERIAL]: Added a pointer to
- BUILTIN_TERMINFO.
- * stage2/serial.c (serial_gotoxy): Use ti_cursor_address.
- (serial_cls): Use ti_clear_screen.
- (serial_highlight): use ti_enter_standout_mode and
- ti_exit_standout_mode.
-
-2002-11-30 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/disk_io.c (rawread): Make sure that SECTOR is valid.
- If not, set ERRNUM to ERR_GEOM and return zero. This check is
- critical when a partition table is corrupted.
-
-2002-11-28 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/asm.S (console_cls): Write spaces to the entire screen
- instead of getting/setting the video mode, because this flickers
- the screen and is quite annoying, if using a LCD.
-
-2002-11-15 Yoshinori K. Okuji <okuji@enbug.org>
-
- * docs/grub.texi (QNX): New subsection. Reported by
- Marian-Nicolae V. ION <marian_ion@noos.fr>.
-
-2002-10-28 Yoshinori K. Okuji <okuji@enbug.org>
-
- * grub/asmstub.c (console_translate_key): Deal with KEY_PPAGE
- and KEY_NPAGE.
- * stage2/serial.c (serial_translate_key_sequence): Added two new
- codes for Page Up and Page Down.
- * stage2/asm.S (translation_table): Added entries for KEY_PPAGE
- and KEY_NPAGE.
- * stage2/stage2.c (run_menu): Deal with Page Up and Page Down.
- Also recognize the right key for the selection of a boot entry.
- Suggested by Adam Lackorzynski <adam@os.inf.tu-dresden.de>.
-
-2002-10-10 Jason Thomas <jason@topic.com.au>
-
- * stage2/builtins.c (setup_func): Added missing space to --force-lba
- option. Reported by Kenneth Crudup <kenny@panix.com>
-
-2002-10-06 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/asm.S (gateA20): Output a dummy command (0xff), as a
- workaround for USB keyboard hanging problem. Suggested by
- Hidetoshi Nishimaki <nishimaki@mxs.nes.nec.co.jp>.
-
-2002-10-06 Yoshinori K. Okuji <okuji@enbug.org>
-
- * configure.in (falign_loop_flag): New variable. Set to if GCC
- supports `-falign-*'. If true, use `-falign-jumps',
- `-falign-loops' and `-falign-functions' instead of
- `-malign-jumps', `-malign-loops' and `-malign-functions',
- because `-malign-*' are obsolete in GCC 3.x. Reported by Jeremy
- Katz.
-
-2002-09-13 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/serial.c (fill_input_buf): Take a new argument NOWAIT.
- If NOWAIT is true, don't loop.
- All callers are changed.
-
-2002-09-08 Yoshinori K. Okuji <okuji@enbug.org>
-
- * configure.in (--disable-serial): Fix a typo in the
- description.
-
-2002-08-20 Jason Thomas <jason@topic.com.au>
-
- Changed highlight state code for hercules, console and serial.
- The state was 0 - normal or 1 - highlight.
- The state is now defined using an enum called color_state.
-
- * stage2/term.h (color_state): New enum.
- (COLOR_STATE_STANDARD): Standard color to use when not using
- user defined.
- (COLOR_STATE_NORMAL): User defined normal color.
- (COLOR_STATE_HIGHLIGHT): User defined highlight color.
- (console_highlight): Renamed to console_setcolorstate.
- (serial_highlight): Renamed to serial_setcolorstate.
- (hercules_highlight): Renamed to hercules_setcolorstate.
- * stage2/hercules.c (herc_highlight_state): Removed.
- (herc_standard_color): New variable.
- (herc_color_state): Likewise.
- (herc_highlight): Renamed to herc_setcolorstate.
- (herc_setcolorstate): Added switch to handle new states.
- * stage2/console.c (console_highlight_state): Removed.
- (console_standard_color): New variable.
- (console_color_state): Likewise.
- (console_highlight): Renamed to console_setcolorstate.
- (console_setcolorstate): Added switch to handle new states.
- * stage2/serial.c (serial_highlight): Renamed to
- serial_setcolorstate.
- (serial_setcolorstate): Adjusted 'if' to suit new states.
- * grub/asmstub.c (console_highlight): Renamed to
- console_setcolorstate.
- (console_setcolorstate): Adjusted 'if' to suit new states.
- * stage2/stage2.c (print_entry): Set color states using new
- states.
- (print_border): Likewise.
- * stage2/stage2.c (run_menu): Reverse if (!) to if () for
- uniformitty.
-
-2002-07-12 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/boot.c (load_image): Rewrite the Linux booting support
- radically. Now it should work even on a machine having, say,
- only 128KB, theoretically. Of course, GRUB itself doesn't work
- on such a system, though.
- (load_initrd): Initialize LH based on CUR_ADDR, because the
- location becomes dynamic.
- * stage2/shared.h (LINUX_MAX_SETUP_SECTS): Set to 64.
- (LINUX_HEAP_END_OFFSET): Set to (0x9000 - 0x200).
- (LINUX_STAGING_AREA): Removed.
- (LINUX_SETUP): Likewise.
- (LINUX_KERNEL): Likewise.
- (LINUX_KERNEL_MAXLEN): Likewise.
- (LINUX_SETUP_SEG): Likewise.
- (LINUX_INIT_SEG): Likewise.
- (LINUX_SETUP_STACK): Set to 0x9000.
- (LINUX_BZIMAGE_ADDR): New macro.
- (LINUX_ZIMAGE_ADDR): Likewise.
- (LINUX_OLD_REAL_MODE_ADDR): Likewise.
- (CL_MY_LOCATION): Removed.
- (CL_MY_END_ADDR): Likewise.
- (CL_BASE_ADDR): Likewise.
- (CL_MAGIC): Renamed to ...
- (LINUX_CL_MAGIC): ... this.
- (LINUX_CL_OFFSET): New macro.
- (LINUX_CL_END_OFFSET): Likewise.
- (LINUX_SETUP_MOVE_SIZE): Likewise.
- (struct linux_kernel_header): Change the type of the member
- "cmd_line_ptr" to char *.
- (linux_data_tmp_addr): Declared.
- (linux_data_real_addr): Likewise.
- * stage2/asm.S [!STAGE1_5] (linux_data_tmp_addr): New variable.
- [!STAGE1_5] (linux_data_real_addr): Likewise.
- [!STAGE1_5] (big_linux_boot): Copy the real mode part from
- LINUX_DATA_TMP_ADDR to LINUX_DATA_REAL_ADDR.
- * grub/asmstub.c (linux_data_tmp_addr): New variable.
- (linux_data_real_addr): Likewise.
-
-2002-07-09 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Mark Kettenis <kettenis@chello.nl>:
- * stage2/boot.c (load_image): Recognize newer FreeBSD kernels.
- * stage2/i386-elf.h (EI_OSABI): New macro.
- (EI_ABIVERSION): Likewise.
- (ELFOSABI_FREEBSD): Likewise.
- (EI_PAD): Set to 9.
-
-2002-07-06 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/shared.h (boot_part_offset): Removed.
-
- * stage2/disk_io.c (set_bootdev): Copy the partition information
- here. Now this function can call rawread, so it can fail.
- (boot_part_offset): Removed.
-
- * stage2/builtins.c (boot_func): Don't copy the partition
- information here.
- (real_root_func): Check ERRNUM after calling set_bootdev.
-
-2002-07-04 Yoshinori K. Okuji <okuji@enbug.org>
-
- * docs/grub.texi (Reporting bugs): Use the group name (i.e.
- grub) instead of the group id (i.e. 68) for the URL of the BTS.
-
-2002-07-03 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/serial.c [!GRUB_UTIL] (inb): Added a delay into this
- function itself.
- [!GRUB_UTIL] (outb): Likewise.
- [!GRUB_UTIL] (serial_hw_put): Increase the timeout value, and
- don't call serial_hw_delay explicitly any longer.
- (fill_input_buf): Increase the maximum number of retries, reset
- the counter to zero after getting a valid character, and don't
- call serial_hw_delay explicitly any longer.
-
-2002-07-03 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/serial.c [!GRUB_UTIL] (serial_hw_fetch): Fixed a typo.
- Reported by Ilguiz Latypov.
-
-2002-07-01 Yoshinori K. Okuji <okuji@enbug.org>
-
- * Makefile.am (AUTOMAKE_OPTIONS): New variable. Specify the
- required Automake version explicitly.
-
-2002-06-30 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c [SUPPORT_SERIAL || SUPPORT_HERCULES]
- (terminal_func): Set CURRENT_TERM to each of selected terminals
- before calling grub_printf, and restore CURRENT_TERM after it.
- Reported by Ilguiz Latypov.
- Prepend a carriage return to the prompting message, because it
- is ugly that the same messages fulfill the whole screen.
-
-2002-06-30 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/serial.c [!GRUB_UTIL] (serial_hw_fetch): Fixed the
- conditional statement. Reported by Ilguiz Latypov.
-
-2002-06-24 Yoshinori K. Okuji <okuji@enbug.org>
-
- * MAINTENANCE: New file.
-
-2002-06-15 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/disk_io.c [SUPPORT_NETBOOT] (GRUB): Defined.
- [SUPPORT_NETBOOT]: Include etherboot.h.
- [!STAGE1_5] (print_completions) [SUPPORT_NETBOOT]: When
- completing a disk name, if NETWORK_READY is true, add "nd" as a
- completion.
-
-2002-06-15 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/fsys_xfs.c (le32): Don't use bswap, but use xchgb and
- roll, because 386 doesn't have bswap. Reported by Frode Vatvedt
- Fjeld <frodef@acm.org>.
-
-2002-06-12 Yoshinori K. Okuji <okuji@enbug.org>
-
- * netboot/main.c (ifconfig): If GW is specified, clear out the
- ARP entry for the gateway. If SVR is specified, clear out the
- ARP entry for the server. Reported by Uwe Dannowski
- <ud3@ira.uka.de>.
-
-2002-06-12 Yoshinori K. Okuji <okuji@enbug.org>
-
- * util/grub-md5-crypt.in: Prompt to retype a password, and check
- if the passwords matches. Suggested by Matt Perry
- <matt@primefactor.com>.
- Also, don't use Perl any longer, because *BSD's sh and GNU
- support ``read -r'', and GRUB doesn't support any other
- operating system anyway.
-
-2002-06-12 Yoshinori K. Okuji <okuji@enbug.org>
-
- The terminal handling code is rewritten radically.
-
- * stage2/console.c: New file.
- * stage2/term.h: Likewise.
-
- * stage2/Makefile.am (noinst_HEADERS): Added term.h.
- (libgrub_a_SOURCES): Added serial.c.
- (pre_stage2_exec_SOURCES): Added console.c.
-
- * stage2/asm.S (console_putchar): Rewritten from scratch.
- [!STAGE1_5] (translation_table): New variable.
- [!STAGE1_5] (translate_keycode): New function.
- [!STAGE1_5] (console_getkey): Call translate_keycode.
- [!STAGE1_5] (console_checkkey): Likewise.
- [!STAGE1_5] (nocursor): Renamed to ...
- [!STAGE1_5] (console_nocursor): ... this.
- [!STAGE1_5] (console_set_attrib): Removed.
-
- * stage2/builtins.c: Include term.h.
- (terminal): Removed.
- (normal_color): Likewise.
- (highlight_color): Likewise.
- (cat_func): Display a question mark when a non-printable
- character was read.
- (terminal_func): Rewritten almost from scratch.
-
- * stage2/char_io.c: Include term.h.
- [!STAGE1_5] (auto_fill): Removed.
- [!STAGE1_5] (term_table): New variable.
- [!STAGE1_5] (current_term): Likewise.
- [!STAGE1_5] (real_get_cmdline): New function. The code was
- stolen from the previous version of get_cmdline.
- [!STAGE1_5] (get_cmdline): Rewritten from scratch.
- [!STAGE1_5] (translate_keycode): Removed.
- [!STAGE1_5] (getkey): Rewritten from scratch.
- [!STAGE1_5] (checkkey): Likewise.
- (grub_putchar): Likewise.
- [!STAGE1_5] (gotoxy): Likewise.
- [!STAGE1_5] (getxy): Likewise.
- [!STAGE1_5] (cls): Likewise.
- [!STAGE1_5] (nocursor): New function.
- [SUPPORT_SERIAL] (serial_getxy): Removed.
- [SUPPORT_SERIAL] (serial_gotoxy): Likewise.
- [SUPPORT_SERIAL] (serial_cls): Likewise.
- [SUPPORT_SERIAL] (serial_getxy): Likewise.
- [!STAGE1_5] (set_attrib): Likewise.
-
- * stage2/cmdline.c (init_cmdline): Set COUNT_LINES to -1.
-
- * stage2/common.c [!STAGE1_5] (err_list): Removed
- ERR_NEED_SERIAL and added ERR_DEV_NEED_INIT.
-
- * stage2/hercules.c: Rewritten almost from scratch.
- * stage2/hercules.h (herc_putchar): Removed.
- (herc_cls): Likewise.
- (herc_getxy): Likewise.
- (herc_gotoxy): Likewise.
- (herc_set_attrib): Likewise.
-
- * stage2/serial.c: Rewritten almost from scratch.
- * stage2/serial.h: Likewise.
-
- * stage2/shared.h [GRUB_UTIL] (DISP_UL): Set to the same value
- as VGA's.
- [GRUB_UTIL] (DISP_UR): Likewise.
- [GRUB_UTIL] (DISP_LL): Likewise.
- [GRUB_UTIL] (DISP_LR): Likewise.
- [GRUB_UTIL] (DISP_HORIZ): Likewise.
- [GRUB_UTIL] (DISP_VERT): Likewise.
- [GRUB_UTIL] (DISP_LEFT): Likewise.
- [GRUB_UTIL] (DISP_RIGHT): Likewise.
- [GRUB_UTIL] (DISP_UP): Likewise.
- [GRUB_UTIL] (DISP_DOWN): Likewise.
- (grub_error_t): Removed ERR_NEED_SERIAL.
- Added ERR_DEV_NEED_INIT.
- (normal_color): Removed.
- (highlight_color): Likewise.
- (console_cls): Removed, because this is declared in term.h.
- (console_getxy): Likewise.
- (console_gotoxy): Likewise.
- (console_putchar): Likewise.
- (console_getkey): Likewise.
- (console_checkkey): Likewise.
- (console_set_attrib): Removed.
- (set_attrib): Likewise.
- [GRUB_UTIL] (nocursor): Declared.
- (auto_fill): Removed.
- (terminal): Likewise.
- (TERMINAL_CONSOLE): Likewise.
- (TERMINAL_SERIAL): Likewise.
- (TERMINAL_HERCULES): Likewise.
- (TERMINAL_DUMB): Likewise.
- (translate_keycode): Likewise.
-
- * stage2/stage2.c: Include term.h.
- (print_entry): Rewritten from scratch.
- (print_entries): Likewise.
- (print_border): Likewise.
- (set_line): Removed.
- (set_line_normal): Likewise.
- (set_line_highlight): Likewise.
-
- * grub/Makefile.am (AM_CFLAGS): Added -DSUPPORT_HERCULES=1.
-
- * grub/asmstub.c: Don't include hercules.h. Include term.h.
- (console_current_color): New variable.
- (console_translate_key): New function.
- (console_checkkey): Rewritten from scratch.
- (console_getkey): Likewise.
- (console_putchar): Likewise.
- (console_set_attrib): Removed.
- (console_highlight): New function.
- (console_setcolor): Likewise.
- (console_nocursor): Likewise.
- (serial_getkey): Removed.
- (serial_checkkey): Likewise.
- (serial_putchar): Likewise.
- (serial_exists): Likewise.
- (serial_get_port): Likewise.
- (serial_init): Likewise.
- (serial_hw_fetch): New function.
- (serial_hw_put): Likewise.
- (serial_hw_delay): Likewise.
- (serial_hw_get_port): Likewise.
- (serial_hw_init): Likewise.
- (set_serial_device): Renamed to ...
- (serial_set_device): ... this.
- (herc_putchar): Renamed to ...
- (hercules_putchar): ... this.
- (herc_cls): Renamed to ...
- (hercules_cls): ... this.
- (herc_getxy): Renamed to ...
- (hercules_getxy): ... this.
- (herc_gotoxy): Renamed to ...
- (hercules_gotoxy): ... this.
- (hercules_highlight): New function.
- (hercules_setcolor): Likewise.
- (hercules_nocursor): Likewise.
- (herc_set_attrib): Removed.
-
- * grub/main.c: Include term.h.
- (main): If USE_CURSES is false, set CURRENT_TERM->FLAGS to
- TERM_NO_EDIT | TERM_DUMB. TERMINAL is not used any longer.
-
-2002-06-01 Yoshinori K. Okuji <okuji@enbug.org>
-
- * docs/grub.texi (FAQ): Removed. See the GNU GRUB FAQ on the web
- instead.
-
-2002-05-31 Yoshinori K. Okuji <okuji@enbug.org>
-
- * docs/grub.texi (Reporting bugs): Recommend using the BTS on
- Savannah rather than the list bug-grub.
-
-2002-05-25 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c (boot_func): Load the boot partition
- information, only if the address of the boot partition entry is
- set appropriately.
- (real_root_func): If ATTEMPT_MOUNT is false, call open_partition
- and if successful, call set_bootdev, to set the offset of the
- boot partition and the address of the boot paetition entry.
- IF ATTEMPT_MOUNT is false, don't set BOOTDEV. The BSD evil hack
- is useless with the command "rootnoverify" anyway.
- * stage2/disk_io.c (boot_part_addr): Initialized with zero
- explicitly, to emphasize that it is invalid.
-
-2002-05-24 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c (real_root_func): New function.
- (root_func): Just call real_root_func.
- (rootnoverify_func): Likewise.
-
-2002-05-23 Yoshinori K. Okuji <okuji@enbug.org>
-
- * configure.in (AM_INIT_AUTOMAKE): Changed the version number to
- 0.93.
-
-2002-05-23 Yoshinori K. Okuji <okuji@enbug.org>
-
- Define the behavior of the boot loader when the load end address
- and the bss end address are zero in the Multiboot Specification,
- and add the support into GRUB. I've modified a patch from Yuri
- Zaporogets <yuriz@ukr.net>.
-
- * stage2/boot.c (load_image): In the case of Multiboot a.out
- kludge, set the load end address to the load address plus the
- size of the OS image file, if it is zero. Similarly, set the bss
- end address to the load end address, if it is zero.
-
- * util/mbchk.c (check_multiboot): Don't check if the load
- address is greater than or equal to the load end address, if the
- load end address is zero. Don't check if the load end address is
- greater than the bss end address, if the bss end address is
- zero. And, don't check if the load end address is less than or
- equal to the entry address, if the load end address is zero.
-
- * docs/multiboot.texi (The address fields of Multiboot header):
- Added descriptions about the behavior of the boot loader when
- LOAD_END_ADDR is zero and BSS_END_ADDR is zero.
-
-2002-05-22 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c (boot_func): If DEBUG is true, print
- BOOT_DRIVE and BOOT_PART_OFFSET.
- Don't set ERRNUM after rawread failed, because rawread should
- set ERRNUM itself.
-
-2002-05-20 Yoshinori K. Okuji <okuji@enbug.org>
-
- * lib/device.c (read_device_map): Show an error message and exit
- abnormally, if MAP[DRIVE] has already been filled.
- * util/grub-install.in: If there is any dulicated entry, print
- an error message and exit abnormally.
-
-2002-05-20 Yoshinori K. Okuji <okuji@enbug.org>
-
- * lib/device.c: Don't include linux/hdreg.h, linux/major.h,
- or linux/kdev_t.h.
- [__linux__] (HDIO_GETGEO): Defined.
- [__linux__] (hd_geometry): Likewise.
- [__linux__] (FLOPPY_MAJOR): Likewise.
- [__linux__] (MINORBITS): Likewise.
- [__linux__] (MAJOR): Likewise.
-
-2002-05-08 Yoshinori K. Okuji <okuji@enbug.org>
-
- * netboot/fsys_tftp.c (tftp_read): Don't call buf_fill unless
- SIZE is positive.
-
-2002-05-08 Yoshinori K. Okuji <okuji@enbug.org>
-
- * netboot/etherboot.h (ETH_MAX_MTU): Because some DHCP/BOOTP
- servers don't treat the maximum length the same as Etherboot,
- subtract the size of an IP header and that of an UDP header.
-
-2002-04-30 Yoshinori K. Okuji <okuji@enbug.org>
-
- From Jean-Jacques Michel <jjmichel@linbox.com>:
- * stage2/boot.c (load_image): For Linux, check if DATA_LEN is
- greater than MULTIBOOT_SEARCH. If that's true, read the rest
- after copying data already read in BUFFER.
-
-2002-04-30 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/boot.c (load_image): For Linux, don't check if the
- length of protected mode code is greater than or equal to the
- expected length minus 16. Instead, just check if no error
- occurred. That was problematic, because memdisk has no protected
- mode code. Also, I don't see what the magic number 16 was for.
-
-2002-04-29 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c [SUPPORT_SERIAL] (terminal_func): Added a
- new option ``--silent''. This suppresses messages, if specified.
-
-2002-04-29 Yoshinori K. Okuji <okuji@enbug.org>
-
- * config.guess: New upstream version.
- * config.sub: Likewise.
-
-2002-04-20 Yoshinori K. Okuji <okuji@enbug.org>
-
- * netboot/config.c (PCI_NIC) [INCLUDE_DAVICOM]: Fix typos.
- Reported by Julien Perrot <julien.perrot@iie.cnam.fr>.
-
-2002-04-17 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c [SUPPORT_SERIAL] (terminal_func): Set
- COUNT_LINES to -1, to disable the pager.
-
-2002-04-16 Yoshinori K. Okuji <okuji@enbug.org>
-
- * docs/grub.texi (Obtaining and Building GRUB): Update the link
- to the binutils site.
-
-2002-04-06 Pavel Roskin <proski@gnu.org>
-
- * util/grub-install.in: Fix hardcoded /dev/hda1.
-
-2002-04-06 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c [GRUB_UTIL] (dump_func): New function.
- [GRUB_UTIL] (builtin_dump): New variable.
- (builtin_table) [GRUB_UTIL]: Added a pointer to BUILTIN_DUMP.
- * util/grub-install.in: Make sure that GRUB reads the same
- images as the host operating system by comparing the result of
- running the command "dump" with the contents of the OS file.
-
-2002-04-04 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c (setup_func): Don't embed a drive number, if
- unnecessary.
-
-2002-03-29 Yoshinori K. Okuji <okuji@enbug.org>
-
- * docs/grub.texi (General commands): Added ``pager'' into the
- menu.
- (pager): New subsection.
- (terminal): Added a description about the option
- ``--lines=LINES''.
-
- * configure.in (AC_INIT_AUTOMAKE): Set the version number to
- 0.92.
-
-2002-03-26 Yoshinori K. Okuji <okuji@enbug.org>
-
- * netboot/eepro100.c (eepro100_probe): Increase the delay at the
- initialization.
-
-2002-03-26 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/boot.c (linux_mem_size): New variable.
- (load_image): Check a mem= option and set LINUX_MEM_SIZE to the
- specified memory size, if any. Otherwise, to zero. When an
- overflow is detected, use LINUX_INITRD_MAX_ADDRESS instead.
- (load_initrd): If LINUX_MEM_SIZE is non-zero, use it instead of
- the actual memory size.
- * stage2/char_io.c (safe_parse_maxint): Use ERR_NUMBER_OVERFLOW
- instead of ERR_NUMBER_PARSING, when an overflow occurs.
- * stage2/common.c [!STAGE1_5] (err_list): Added
- ERR_NUMBER_OVERFLOW.
- * stage2/shared.h (ERR_NUMBER_OVERFLOW): New constant.
-
-2002-03-24 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/stage2.c (run_menu): Call cls outside the loop to run
- scripts.
- * stage2/cmdline.c (run_script): Prompt a user's intervention,
- only when FALLBACK_ENTRY is negative.
-
-2002-02-11 Pavel Roskin <proski@gnu.org>
-
- * util/grub-install.in (find_device): New function - find block
- device for given file or directory. Resolve symlinks to fix
- problem on Linux with devfs and old device names in /etc/fstab.
- Use find_device() for root_device, bootdir_device and
- grubdir_device.
-
-2002-02-08 Yoshinori K. Okuji <okuji@enbug.org>
-
- * grub/main.c (OPT_NO_PAGER): New macro.
- (longopts): Added an entry for "--no-pager".
- (usage): Added a description about "--no-pager".
- (main): In case of OPT_NO_PAGER, set USE_PAGER to zero. The same
- thing is done with OPT_BATCH, because the pager is just harmful
- in batch mode.
-
-2002-02-08 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c (help_func): Show all the commands runnable
- with the command-line interface, if "--all" is specified.
-
-2002-02-08 Yoshinori K. Okuji <okuji@enbug.org>
-
- An internal pager is implemented.
-
- * stage2/builtins.c (pager_func): New function.
- (builtin_pager): New variable.
- (terminal_func): New option, "--lines=LINES" is added. If this
- option is specified, set MAX_LINES to the value. Otherwise, set
- MAX_LINES to 24.
- (vbeprobe_func): Remove the pager code specific to this
- function.
- (builtin_table): Added a pointer to BUILTIN_PAGER.
- * stage2/char_io.c (max_lines) [!STAGE1_5]: New variable.
- (count_lines) [!STAGE1_5]: Likewise.
- (use_pager) [!STAGE1_5]: Likewise.
- (grub_putchar) [!STAGE1_5]: if C is a newline and COUNT_LINES is
- not -1, count up the number of lines. If it exceeds the maximum
- number of lines minus 2, show a message and wait for input of
- return key. "minus 2" is to reserve space for the message
- printed by this internal pager.
- * stage2/cmdline.c (enter_cmdline): If USE_PAGER is true, set
- COUNT_LINES to zero, before running a command, and reset
- COUNT_LINES to -1 after that.
- * stage2/shared.h (max_lines) [!STAGE1_5]: Declared.
- (count_lines) [!STAGE1_5]: Likewise.
- (use_pager) [!STAGE1_5]: Likewise.
-
-2002-02-08 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/fsys_jfs.c (jfs_read) [STAGE1_5]: Set and reset
- DISK_READ_FUNC even in Stage 1.5.
- * stage2/fsys_xfs.c (xfs_read) [STAGE1_5]: Likewise.
-
- * stage2/stage1_5.c (saved_sector): Initialized with -1.
- (cmain): Check if SAVED_SECTOR was set appropriately after
- reading the second sector of Stage 2. If SAVED_SECTOR is not
- set (i.e. it is equal to -1), print an error and stop.
-
-2002-02-05 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c (setup_func): Add a VSTa fs entry into
- STAGE1_5_MAP.
-
-2002-02-05 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/shared.h (BUILTIN_HELP_LIST): New macro. Used for
- commands whose help messages are listed when no argument is
- specified to the command "help".
- * stage2/builtins.c (builtin_blocklist): Added the attribute
- BUILTIN_HELP_LIST.
- (builtin_boot): Likewise.
- (builtin_bootp): Likewise.
- (builtin_cat): Likewise.
- (builtin_chainloader): Likewise.
- (builtin_color): Likewise.
- (builtin_configfile): Likewise.
- (builtin_device): Likewise.
- (builtin_dhcp): Likewise.
- (builtin_displayapm): Likewise.
- (builtin_displaymem): Likewise.
- (builtin_find): Likewise.
- (builtin_geometry): Likewise.
- (builtin_halt): Likewise.
- (builtin_help): Likewise.
- (builtin_hide): Likewise.
- (builtin_ifconfig): Likewise.
- (builtin_initrd): Likewise.
- (builtin_kernel): Likewise.
- (builtin_makeactive): Likewise.
- (builtin_map): Likewise.
- (builtin_md5crypt): Likewise.
- (builtin_module): Likewise.
- (builtin_modulenounzip): Likewise.
- (builtin_partnew): Likewise.
- (builtin_parttype): Likewise.
- (builtin_quit): Likewise.
- (builtin_rarp): Likewise.
- (builtin_reboot): Likewise.
- (builtin_root): Likewise.
- (builtin_rootnoverify): Likewise.
- (builtin_serial): Likewise.
- (builtin_setkey): Likewise.
- (builtin_setup): Likewise.
- (builtin_terminal): Likewise.
- (builtin_testvbe): Likewise.
- (builtin_tftpserver): Likewise.
- (builtin_unhide): Likewise.
- (builtin_uppermem): Likewise.
- (builtin_vbeprobe): Likewise.
-
- (help_func): When no argument is specified, if the last entry
- was at the left column, print an extra newline.
-
-2002-02-05 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/shared.h (BUILTIN_HIDDEN): Renamed to ...
- (BUILTIN_NO_ECHO): ... this. The old name was too difficult to
- see _what_ was hidden.
-
-2002-02-05 Yoshinori K. Okuji <okuji@enbug.org>
-
- * netboot/misc.c (twiddle): Go back to the bar progress, copied
- from etherboot-5.0.5/src/misc.c. Execute the code only if DEBUG
- is true.
-
-2002-02-05 Yoshinori K. Okuji <okuji@enbug.org>
-
- * stage2/builtins.c (displaymem_func): Use hex digits to display
- for consistency.
-
-2002-02-04 Jason Thomas <jason@topic.com.ah>
-
- From Denis Kitzman <dkitzman@blue.weeg.uiowa.edu>:
- * stage2/Makefile.am (libgrub_a_CFLAGS): Fixed a typo.
- FSYS_XFS, USE_MD5_PASSWORDS, SUPPORT_SERIAL, and
- SUPPORT_HERCULES did not get defined.
-
-2002-01-20 Yoshinori K. Okuji <okuji@gnu.org>
-
- * util/grub-image.in: Check stage2 instead of stage2.c to
- determine where the script is invoked, because srcdir may not
- be used for the compilation.
-
-2002-01-20 Yoshinori K. Okuji <okuji@gnu.org>
-
- * grub/asmstub.c (console_putchar): When not using curses,
- ignore a carriage return, because a newline in Unix is only a
- line feed.
-
-2002-01-18 Klaus Reichl <Klaus.Reichl@alcatel.at>
-
- * stage2/fsys_minix.c (minix_dir): Fixed bug getting filenames
- with MAXNAMELEN right.
-
- * stage2/char_io.c (get_cmdline, cl_refresh): If TERMINAL_DUMB
- section is always 0.
- Line is only cleared if !TERMINAL_DUMB.
-
- * grub/main.c (use_curses): Initialize to 0 if !HAVE_LIBCURSES
- (main): Check for curses use and set terminal to dumb if we
- don't use it (helps for --batch and variants of non-curses
- setup).
-
-2002-01-15 Yoshinori K. Okuji <okuji@gnu.org>
-
- * configure.in (AM_INIT_AUTOMAKE): The version number is
- upgraded to 0.91.
-
-2002-01-15 Yoshinori K. Okuji <okuji@gnu.org>
-
- * docs/grub.texi (Preset Menu): New chapter.
-
-2002-01-15 Yoshinori K. Okuji <okuji@gnu.org>
-
- * docs/grub.texi: Added some text about JFS and XFS.
-
-2002-01-08 Yoshinori K. Okuji <okuji@gnu.org>
-
- * grub/main.c (use_preset_menu): New variable.
- (OPT_PRESET_MENU): New macro.
- (longopts): Added an entry for "--preset-menu".
- (usage): Added a description for "--preset-menu". Also, change
- the first character of the description for "--device-map" to
- lower case for consistency.
- (main): Set USE_PRESET_MENU to 1 in the case of OPT_PRESET_MENU.
- * stage2/shared.h (use_preset_menu): Declared.
- * stage2/stage2.c [PRESET_MENU_STRING || SUPPORT_DISKLESS]
- (open_preset_menu) [GRUB_UTIL]: If USE_PRESET_MENU is false,
- return zero immediately.
-
-2002-01-08 Yoshinori K. Okuji <okuji@gnu.org>
-
- * stage2/common.c [SUPPORT_DISKLESS]
- (setup_diskless_environment): Removed. The feature is moved to
- the preset menu.
- * stage2/stage2.c [SUPPORT_DISKLESS] (preset_menu): Set to the
- string "bootp\n".
- [SUPPORT_DISKLESS] (preset_menu_offset): Defined, as if
- PRESET_MENU_STRING is defined.
- [SUPPORT_DISKLESS] (open_preset_menu): Likewise.
- [SUPPORT_DISKLESS] (read_from_preset_menu): Likewise.
- [SUPPORT_DISKLESS] (close_preset_menu): Likewise.
-
-2002-01-06 Yoshinori K. Okuji <okuji@gnu.org>
-
- The preset menu has a priority over the configuration file.
- Suggested by Christoph Plattner.
-
- * stage2/stage2.c [PRESET_MENU_STRING] (open_preset_menu):
- Check if PRESET_MENU is not NULL.
- [PRESET_MENU_STRING] (close_preset_menu): Set PRESET_MENU to
- NULL.
- (cmain): New internal function, reset. This function resets
- AUTO_FILL, CONFIG_LEN, MENU_LEN, NUM_ENTRIES, CONFIG_ENTRIES,
- MENU_ENTRIES and call init_config.
- Try to open the preset menu first, and try to open the
- configuration file, only if that failed.
- Even if the preset menu was read, try to open the configuration
- file. This time, opening the preset menu never succeed, because
- close_preset_menu ensures that the preset menu is available at
- most once.
-
-2002-01-06 Yoshinori K. Okuji <okuji@gnu.org>
-
- * netboot/misc.c (inet_aton): Don't check if *P is an asterisk,
- if I is 3. Reported by Rick (his real name and address are
- unknown).
-
-2002-01-03 Yoshinori K. Okuji <okuji@gnu.org>
-
- Update the netboot stuff to Etherboot-5.0.5.
-
- * configure.in (--enable-3c590): Removed. This was a mistake.
- (--enable-davicom): New option.
- (--enable-eepro): Likewise.
- (--enable-natsemi): Likewise.
- (--enable-ni5010): Likewise.
- (--enable-sis900): Likewise.
- (--enable-w89c840): Likewise.
- (--enable-3c509-hack): Removed.
- (--enable-ns8390-force-16bit): Likewise.
-
- * netboot/Makefile.am (libdrivers_a_SOURCES): Added timer.c and
- timer.h.
- (EXTRA_libdrivers_a_SOURCES): Added davicom.c, eepro.c, fa311.c,
- natsemi.c, ni5010.c, sis900.c, sis900.h, tlan.c and w89c840.c.
- (EXTRA_DIST): Added sis900.txt.
- (3c595_drivers): Remove 3c590.o from this.
- (davicom_drivers): New variable.
- (eepro_drivers): Likewise.
- (natsemi_drivers): Likewise.
- (ni5010_drivers): Likewise.
- (sis900_drivers): Likewise.
- (w89c840_drivers): Likewise.
- (3c590_o_CFLAGS): Removed.
- (davicom_o_CFLAGS): New variable.
- (eepro_o_CFLAGS): Likewise.
- (natsemi_o_CFLAGS): Likewise.
- (ni5010_o_CFLAGS): Likewise.
- (sis900_o_CFLAGS): Likewise.
- (w89c840_o_CFLAGS): Likewise.
-
- * netboot/davicom.c: New file, from Etherboot-5.0.5.
- * netboot/eepro.c: Likewise.
- * netboot/natsemi.c: Likewise.
- * netboot/ni5010.c: Likewise.
- * netboot/sis900.c: Likewise.
- * netboot/sis900.h: Likewise.
- * netboot/sis900.txt: Likewise.
- * netboot/timer.c: Likewise.
- * netboot/timer.h: Likewise.
- * netboot/w89c840.c: Likewise.
- * netboot/fa311.c: Likewise.
- * netboot/tlan.c: Likewise.
-
- * netboot/3c509.c: Copied from Etherboot-5.0.5.
- * netboot/3c509.h: Likewise.
- * netboot/3c595.c: Likewise.
- * netboot/3c90x.c: Likewise.
- * netboot/3c90x.txt: Likewise.
- * netboot/cards.h: Likewise.
- * netboot/cs89x0.c: Likewise.
- * netboot/depca.c: Likewise.
- * netboot/eepro100.c: Likewise.
- * netboot/epic100.c: Likewise.
- * netboot/i82586.c: Likewise.
- * netboot/lance.c: Likewise.
- * netboot/linux-asm-string.h: Likewise.
- * netboot/nic.h: Likewise.
- * netboot/ns8390.c: Likewise.
- * netboot/ns8390.h: Likewise.
- * netboot/otulip.c: Likewise.
- * netboot/pci.h: Likewise.
- * netboot/rtl8139.c: Likewise.
- * netboot/sk_g16.c: Likewise.
- * netboot/smc9000.c: Likewise.
- * netboot/tiara.c: Likewise.
- * netboot/tulip.c: Likewise.
- * netboot/via-rhine.c: Likewise.
-
- * netboot/config.c: Applied a diff between Etherboot-4.6.4 and
- Etherboot-5.0.5 manually.
- * netboot/main.c: Likewise.
- * netboot/pci.c: Likewise.
- * netboot/etherboot.h: Rewritten mostly from scratch, based on
- the same file in Etherboot-5.0.5.
- * netboot/misc.c: Likewise.
- * netboot/osdep.h: Likewise.
- * netboot/fsys_tftp.c (GRUB): Defined.
- (buf_fill): Use rfc2131_sleep_interval instead of rfc951_sleep.
-
- * stage2/builtins.c [SUPPORT_NETBOOT] (GRUB): Defined.
- (boot_func) [SUPPORT_NETBOOT]: Call cleanup_net.
- * stage2/cmdline.c [SUPPORT_DISKLESS] (GRUB): Defined.
- * stage2/common.c [SUPPORT_DISKLESS] (GRUB): Likewise.
-
-2002-01-02 Jeremy Katz <katzj@redhat.com>
-
- * util/grub-install.in: Support using mktemp as well as tempfile
- for secure temporary file creation.
-
-2002-01-02 Jeremy Katz <katzj@redhat.com>
-
- * stage2/md5.c (md5_password): Ensure the password exists before
- trying to check against the md5 crypted version.
-
-2001-12-30 Yoshinori K. Okuji <okuji@gnu.org>
-
- * stage1/stage1.S: Don't call INT 13, AH=48H, because it is
- difficult to call this function with the workaround implemented
- in the previous change due to the size limit of Stage 1.
-
- (lba_mode) [NO_BUGGY_BIOS_IN_THE_WORLD]: Don't check the
- geometry explicitly. This shouldn't be harmful, as INT 13,
- AH=42H should take care of it, and if you cannot read Stage 2
- even with LBA because of a geometry problem, you can never read
- it.
-
- * stage2/start.S (lba_mode) [NO_BUGGY_BIOS_IN_THE_WORLD]:
- Likewise.
-
-2001-12-30 Yoshinori K. Okuji <okuji@gnu.org>
-
- * stage2/bios.c (get_diskinfo): Clear out the structure DRP
- before calling get_diskinfo_int13_extensions, because the Ralf
- Brown's Interrupt List says that Dell machines using PhoenixBIOS
- 4.0 Release 6.0 fail, if DRP.FLAGS is not zero. Setting the
- entire structure to zero may be overkill, but it should be safe.
-
- * stage2/char_io.c [STAGE1_5] (grub_memset): Defined.
-
-2001-12-30 Yoshinori K. Okuji <okuji@gnu.org>
-
- From John Goerzen <jgoerzen@complete.org>:
- * util/grub-install.in (convert): Added NetBSD support.
-
-2001-12-30 Yoshinori K. Okuji <okuji@gnu.org>
-
- * util/grub-install.in: Set GRUB_PREFIX and BOOTDIR to "/grub"
- and "${rootdir}" respectively in NetBSD.
-
-2001-12-30 Yoshinori K. Okuji <okuji@gnu.org>
-
- * stage2/builtins.c (builtin_geometry): Add extra space
- characters into the long description.
- (builtin_kernel): Likewise.
- (builtin_vbeprobe): Likewise.
-
-2001-12-19 Yoshinori K. Okuji <okuji@gnu.org>
-
- From Michael Sullivan <mike@trdlnk.com>:
- * stage1/stage1.S (real_start): Added a workaround for AST BIOS,
- because it clobbers %dl with INT 13, AH=41H.
-
-2001-12-19 Yoshinori K. Okuji <okuji@gnu.org>
-
- * stage2/fsys_fat.c (fat_read): Fix the contradictory comment.
- Reported by Filip Van Raemdonck <mechanix@digibel.org>.
-
-2001-12-11 Yoshinori K. Okuji <okuji@gnu.org>
-
- * stage2/builtins.c (displayapm_func): Don't use multi-line
- string literals but string concatenation instead, to suppress
- warnings from gcc-3.0.x.
- * stage2/cmdline.c (print_cmdline_message): Likewise.
- * util/mbchk.c (usage): Likewise.
-
- * stage2/smp-imps.c (imps_read_config_table): Add a break
- statement after the label ``default''.
-
- * util/mbchk.c: Include <stdlib.h> for the prototype of exit.
-
- * stage2/serial.c (serial_port): Initialize with 0 instead of
- -1, as an invalid value, because SERIAL_PORT is unsigned. This
- change shouldn't affect anything.
- (serial_exists): For the above change, check SERIAL_PORT with 0
- instead of -1.
-
-2001-12-10 Yoshinori K. Okuji <okuji@gnu.org>
-
- * stage2/shared.h (ERR_NO_DISK_SPACE): New constant.
- * stage2/common.c (err_list): Added an entry for
- ERR_NO_DISK_SPACE.
- * docs/grub.texi (Stage2 errors): Added the description.
- * stage2/builtins.c (embed_func): Use ERR_NO_DISK_SPACE instead
- of ERR_DEV_VALUES when the spare space is too small. Suggested
- by Eric Mumpower <nocturne@permabit.com>.
-
-2001-12-10 Yoshinori K. Okuji <okuji@gnu.org>
-
- * grub/asmstub.c: Include <signal.h>.
- (grub_stage2) [HAVE_LIBCURSES]: If USE_CURSES is true, ignore
- the signal SIGWINCH. Reported by Christian Hudon
- <chrish@debian.org>.
-
-2001-11-29 Yoshinori K. Okuji <okuji@gnu.org>
-
- From Jason Thomas:
- * stage2/disk_io.c (set_partition_hidden_flag): Complete rewrite
- of this function which now supports logical partitions.
-
-2001-11-12 Yoshinori K. Okuji <okuji@gnu.org>
-
- * docs/grub.texi: The copyright of this file is only held by
- Free Software Foundation, Inc., as Erich Boleyn has assigned his
- copyright to the FSF.
- * stage1/stage1.S: Likewise.
- * stage2/asm.S: Likewise.
- * stage2/boot.c: Likewise.
- * stage2/builtins.c: Likewise.
- * stage2/char_io.c: Likewise.
- * stage2/cmdline.c: Likewise.
- * stage2/common.c: Likewise.
- * stage2/disk_io.c: Likewise.
- * stage2/fat.h: Likewise.
- * stage2/filesys.h: Likewise.
- * stage2/freebsd.h: Likewise.
- * stage2/fsys_ext2fs.c: Likewise.
- * stage2/fsys_fat.c: Likewise.
- * stage2/fsys_ffs.c: Likewise.
- * stage2/gunzip.c: Likewise.
- * stage2/i386-elf.h: Likewise.
- * stage2/mb_header.h: Likewise.
- * stage2/mb_info.h: Likewise.
- * stage2/pc_slice.h: Likewise.
- * stage2/shared.h: Likewise.
- * stage2/stage1_5.c: Likewise.
- * stage2/stage2.c: Likewise.
- * stage2/start.S: Likewise.
-
-2001-11-07 Yoshinori K. Okuji <okuji@gnu.org>
-
- * stage2/builtins.c (terminal_func) [!SUPPORT_SERIAL]: Disable
- the wait code, as it is usable only when serial support is on.
- Reported by Karl Hammar <karl@kalle.csb.ki.se>.
-
-2001-10-27 Yoshinori K. Okuji <okuji@gnu.org>
-
- JFS and XFS support is added.
-
- From Serguei Tzukanov <tzukanov@narod.ru>:
- * configure.in (--disable-jfs): New option.
- (--disable-xfs): Likewise.
- * stage2/Makefile.am (noinst_HEADERS): Added jfs.h and xfs.h.
- (libgrub_a_SOURCES): Added fsys_jfs.c and fsys_xfs.c.
- (libgrub_a_CFLAGS): Added -DFSYS_JFS=1 and -DFSYS_XFS=1.
- (pkgdata_DATA): Added jfs_stage1_5 and xfs_stage1_5.
- (noinst_PROGRAMS): Added jfs_stage1_5.exec and
- xfs_stage1_5.exec.
- (pre_stage2_exec_SOURCES): Added fsys_jfs.c and fsys_xfs.c.
- (jfs_stage1_5_exec_SOURCES): New variable.
- (jfs_stage1_5_exec_CFLAGS): Likewise.
- (jfs_stage1_5_exec_ASFLAGS): Likewise.
- (jfs_stage1_5_exec_LDFLAGS): Likewise.
- (xfs_stage1_5_exec_SOURCES): Likewise.
- (xfs_stage1_5_exec_CFLAGS): Likewise.
- (xfs_stage1_5_exec_ASFLAGS): Likewise.
- (xfs_stage1_5_exec_LDFLAGS): Likewise.
- * stage2/builtins.c (setup_func): Add items for JFS and XFS into
- STAGE1_5_MAP.
- * stage2/disk_io.c (fsys_table): Added entries for JFS and XFS.
- * stage2/filesys.h [FSYS_JFS] (FSYS_JFS_NUM): Set to 1.
- [FSYS_JFS] (jfs_mount): Declared.
- [FSYS_JFS] (jfs_read): Likewise.
- [FSYS_JFS] (jfs_dir): Likewise.
- [FSYS_JFS] (jfs_embed): Likewise.
- [!FSYS_JFS] (FSYS_JFS_NUM): Set to 0.
- [FSYS_XFS] (FSYS_XFS_NUM): Set to 1.
- [FSYS_XFS] (xfs_mount): Declared.
- [FSYS_XFS] (xfs_read): Likewise.
- [FSYS_XFS] (xfs_dir): Likewise.
- (NUM_FSYS): Added FSYS_JFS_NUM and FSYS_XFS_NUM.
- * stage2/shared.h (STAGE2_ID_JFS_STAGE1_5): New macro.
- (STAGE2_ID_XFS_STAGE1_5): Likewise.
- [FSYS_JFS] (STAGE2_ID): Set to STAGE2_ID_JFS_STAGE1_5.
- [FSYS_XFS] (STAGE2_ID): Set to STAGE2_ID_XFS_STAGE1_5.
- * stage2/fsys_jfs.c: New file.
- * stage2/fsys_xfs.c: Likewise.
- * stage2/jfs.h: Likewise.
- * stage2/xfs.h: Likewise.
-
-2001-10-27 Yoshinori K. Okuji <okuji@gnu.org>
-
- * stage2/apm.S: Always disconnect from APM. Written by Erich
- Stefan Boleyn.
-
- * util/Makefile.am (noinst_DATA): Removed.
- (EXTRA_DIST): Likewise.
-
-2001-10-14 Gordon Matzigkeit <gord@fig.org>
-
- * configure.in: Explicitly call _AM_DEPENDENCIES(CC) for the
- benefit of older Autoconfs.
-
-2001-10-13 Yoshinori K. Okuji <okuji@gnu.org>
-
- * netboot/fsys_tftp.c (tftp_read): Move the unused data
- forwards, only if AMT is more than zero. If AMT is not positive,
- subtract BUF_READ from SAVED_FILEPOS and set BUF_READ to zero,
- to skip the whole buffer. Reported by Frank Mehnert.
-
-2001-10-13 Yoshinori K. Okuji <okuji@gnu.org>
-
- Don't use get_diskinfo_floppy. Reported by Ben Liblit
- <liblit@eecs.berkeley.edu>.
-
- * stage2/asm.S (get_diskinfo_floppy): Removed (by cpp).
- * stage2/bios.c (get_diskinfo_floppy): Removed.
- (get_diskinfo): Don't call get_diskinfo_floppy any longer.
-
-2001-10-13 Yoshinori K. Okuji <okuji@gnu.org>
-
- Based on a patch from Jeremy Katz <katzj@redhat.com>:
- * docs/grub.texi (Stage2 errors): Added documentation on the
- error number 33 (Serial device not configured).
- * grub/asmstub.c (serial_exists): New function.
- * stage2/serial.c (serial_exists): Likewise.
- * stage2/serial.h (serial_exists): New prototype.
- * stage2/shared.h (grub_error_t): ERR_NEED_SERIAL is added.
- * stage2/builtins.c (terminal_func) [SUPPORT_SERIAL]: If a
- serial device is not configured yet, restore the terminal and
- set ERRNUM to ERR_NEED_SERIAL.
- * stage2/common.c (err_list): Added an item for ERR_NEED_SERIAL.
-
-2001-10-13 Yoshinori K. Okuji <okuji@gnu.org>
-
- From Jason Thomas <jason@topic.com.au>:
- * util/grub-install.in (convert): Add support for DAC960.
-
- From Adrian Phillips <a.phillips@dnmi.no>:
- * lib/device.c (get_dac960_disk_name): New function.
- (init_device_map) [__linux__]: Add support for DAC960.
-
-2001-10-11 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/fsys_reiserfs.c (reiserfs_super_block): Updated
- to better match recent reiserfs versions.
- (reiserfs_mount): Handle cases where journal can't be found,
- e.g. journal on another disk or unexpected journal parameters.
- In that case the journal isn't used.
-
-2001-10-10 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/fsys_reiserfs.c (reiserfs_mount): Don't look at
- the superblock field s_journal_block_count anymore. It used
- to contain 0, it never contained a valid value, and now I
- have a report that it can contain an invalid value.
- Bug reported by Jim Caley <caley@chesco.com>.
-
-2001-09-24 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/fsys_reiserfs.c (reiserfs_dir): Set errnum to
- ERR_FSYS_CORRUPT if a symlink can't be read for some reason,
- but no error is set by read.
-
-2001-08-08 OKUJI Yoshinori <okuji@gnu.org>
-
- From Derrik Pates <dpates@dsdk12.net>:
- * stage2/asm.S [!STAGE1_5] (grub_halt): Set the level of APM
- support to 1.1, before turning off the power state.
-
-2001-08-08 OKUJI Yoshinori <okuji@gnu.org>
-
- * util/grub-md5-crypt.in: Prefix backquotes with backslashes in
- strings. From Fernando Silveira.
-
-2001-08-02 Gordon Matzigkeit <gord@fig.org>
-
- * stage2/common.c (init_bios_info): Ignore zero-length memory
- ranges. From Derrik Pates <dpates@dsdk12.net>.
-
-2001-07-26 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/Makefile.am (libgrub_a_CFLAGS): Enable USE_MD5_PASSWORDS
- for libgrub. Previously that was implicitly done by configure.in
- until the patch from 2001-07-04, which moved that flag from CFLAGS
- to FSYS_CFLAGS. Reported by YAMAGUCHI Shingo
- <shingo@kip.iis.toyama-u.ac.jp>
-
-2001-07-13 OKUJI Yoshinori <okuji@gnu.org>
-
- * util/grub-install.in (convert): Recognize the naming scheme
- for Linux devfs floppy devices. Reported by Jason Thomas
- <jason@topic.com.au>.
-
-2001-07-07 OKUJI Yoshinori <okuji@gnu.org>
-
- * netboot/compile: New file. This was also missing... How many
- ``compile''s does automake want?
-
-2001-07-07 OKUJI Yoshinori <okuji@gnu.org>
-
- From Jan Zerebecki <jan.list@elite-pferde.de>:
- * acinclude.m4 (grub_DEFINE_FILE): Escape double-quotations as
- well.
-
-2001-07-05 OKUJI Yoshinori <okuji@gnu.org>
-
- * configure.in (AM_INIT_AUTOMAKE): Set the version number to
- 0.90.
-
-2001-07-05 OKUJI Yoshinori <okuji@gnu.org>
-
- Ughh! I forgot to add this file to the CVS.
-
- * docs/compile: New file.
-
-2001-07-05 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/grub.texi: Updated.
-
-2001-07-05 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/boot.c (load_initrd) [!NO_DECOMPRESSION]: Set
- NO_DECOMPRESSION to one before opening INITRD, so that GRUB
- doesn't decompress an initrd automatically. Reported by
- Thierry Laronde.
-
-2001-07-04 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/compile: New file.
- * docs/mdate-sh: Likewise.
- * docs/texinfo.tex: Likewise.
- * compile: Removed.
- * mdate-sh: Likewise.
- * texinfo.tex: Likewise.
- * config.guess: Updated from automake-1.4h.
- * config.sub: Likewise.
- * depcomp: Likewise.
- * install-sh: Likewise.
- * missing: Likewise.
- * mkinstalldirs: Likewise.
- * configure.in (AS): New variable.
- (ASFLAGS): Likewise.
- (--disable-md5-password): Use FSYS_CFLAGS instead of CFLAGS.
- * stage1/Makefile.am (AM_CFLAGS): Renamed to ...
- (AM_ASFLAGS): ... this.
- * stage2/Makefile.am (pre_stage2_exec_ASFLAGS): New variable.
- (start_exec_CFLAGS): Renamed to ...
- (start_exec_ASFLAGS): ... this.
- (start_exec-start.o): Renamed to ...
- (start_exec-start.$(OBJEXT)): ... this.
- (e2fs_stage1_5_exec_ASFLAGS): New variable.
- (fat_stage1_5_exec_ASFLAGS): Likewise.
- (ffs_stage1_5_exec_ASFLAGS): Likewise.
- (minix_stage1_5_exec_ASFLAGS): Likewise.
- (reiserfs_stage1_5_exec_ASFLAGS): Likewise.
- (vstafs_stage1_5_exec_ASFLAGS): Likewise.
- (diskless_exec_ASFLAGS): Likewise.
- (nbloader_exec_CFLAGS): Renamed to ...
- (nbloader_exec_ASFLAGS): ... this.
- (nbloader_exec-nbloader.o): Renamed to ...
- (nbloader_exec-nbloader.$(OBJEXT)): ... this.
- (pxeloader_exec_CFLAGS): Renamed to ...
- (pxeloader_exec_ASFLAGS): ... this.
- (pxeloader_exec-pxeloader.$(OBJEXT)): New target.
-
-2001-07-03 OKUJI Yoshinori <okuji@gnu.org>
-
- From Julien Bordet <julien.bordet@int-evry.fr>:
- * stage2/i386-elf.h (Elf32_Shdr): New type.
- * stage2/boot.c (load_image): Added ELF symbol loading support.
-
-2001-06-22 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/char_io.c [STAGE1_5] (grub_strcmp): Defined, even
- for Stage 1.5. See thecomment, for a possible future strategy.
- * stage2/fsys_vstafs.c [!FSYS_VSTAFS]: Don't define anything.
- [STAGE1_5] (grub_strcmp): Removed.
- (get_file_info): Made static.
- (vstafs_readdir): Likewise.
- (vstafs_nextdir): Likewise.
- (curr_ext): Likewise.
- (current_direntry): Likewise.
- (current_blockpos): Likewise.
- (a): Likewise.
-
-2001-06-22 OKUJI Yoshinori <okuji@gnu.org>
-
- VSTa filesystem support is added.
-
- From Kristoffer Brånemyr <ztion@swipnet.se>:
- * stage2/configure.in (--disable-vstafs): New option.
- * stage2/Makefile.am (noinst_HEADERS): Added vstafs.h.
- (libgrub_a_SOURCES): Added fsys_vstafs.c.
- (libgrub_a_CFLAGS): Added -DFSYS_VSTAFS=1.
- (pkgdata_DATA): Added vstafs_stage1_5.
- (noinst_PROGRAMS): Added vstafs_stage1_5.exec.
- (pre_stage2_exec_SOURCES): Added fsys_vstafs.c.
- (vstafs_stage1_5_exec_SOURCES): New variable.
- (vstafs_stage1_5_exec_CFLAGS): Likewise.
- (vstafs_stage1_5_exec_LDFLAGS): Likewise.
- * stage2/disk_io.c (fsys_table): Added an entry for vstafs.
- * stage2/filesys.h [FSYS_VSTAFS] (FSYS_VSTAFS_NUM): Defined as
- 1.
- [FSYS_VSTAFS] (vstafs_mount): New prototype.
- [FSYS_VSTAFS] (vstafs_read): Likewise.
- [FSYS_VSTAFS] (vstafs_dir): Likewise.
- [!FSYS_VSTAFS] (FSYS_VSTAFS_NUM): Defined as 0.
- (NUM_FSYS): Added FSYS_VSTAFS_NUM.
- * stage2/pc_slice.h (PC_SLICE_TYPE_VSTAFS): New macro.
- * stage2/shared.h (STAGE2_ID_VSTAFS_STAGE1_5): Likewise.
- [STAGE1_5 && FSYS_VSTAFS] (STAGE2_ID): Defined as
- STAGE2_ID_VSTAFS_STAGE1_5.
- * stage2/vstafs.h: New file.
- * stage2/fsys_vstafs.c: Likewise.
-
-2001-06-22 OKUJI Yoshinori <okuji@gnu.org>
-
- From Thierry Laronde <thierry@cri74.org>:
- * stage2/builtins.c (configfile_func): Added a prototype.
- (bootp_func): If `--with-configfile' is given, set
- WITH_CONFIGFILE to one, and call configfile_func with
- CONFIG_FILE.
-
-2001-06-21 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/grub.texi: Update the location of the CVS repository
- [/home/cvs -> /cvsroot/grub].
- * README: Likewise.
-
-2001-06-19 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/boot.c (load_image): If the image is a Multiboot ELF OS
- image, get the physical entry address, when a loaded memory
- segment contains it. And, set ENTRY_ADDR to it, after printing
- out the virtual one. Suggested by Rogelio M. Serrano Jr.
- <rogelio@victorio.com>.
-
-2001-05-30 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/grub.texi: Fix some typos. Reported by Florian Hatat
- <mininet@wanadoo.fr>.
-
-2001-05-29 Pavel Roskin <proski@gnu.org>
-
- * configure.in (AC_OUTPUT): Remove debian/Makefile.
-
-2001-05-28 Gordon Matzigkeit <gord@fig.org>
-
- * Makefile.am (SUBDIRS): Remove reference to debian directory.
- Packaging is no longer done by the GRUB team.
-
-2001-05-03 Gordon Matzigkeit <gord@fig.org>
-
- * stage1/stage1.S (nt_magic): Explicitly reserve space for the NT
- magic number.
-
-2001-05-25 Klaus Reichl <Klaus.Reichl@alcatel.at>
-
- * stage2/stage2.c (print_entries_raw): New function.
- (run_menu): Use it to implement menu & command-list if on dumb
- terminals.
- Changes are:
- Adjust FIRST_ENTRY only on non-dumb terminals.
- Setting of SHOW_MENU is honoured also on dumb
- terminals.
- Likely if SHOW_MENU is false, ESC brings her to the
- menu - not to the command-line as before.
- PRINT_BORDER, GOTOXY, SET_LINE_xxx are only called if
- not on dumb terminals.
- Show entry number when timeout is running if terminal is dumb.
- Prompt with entry number when waiting for keys.
-
-2001-05-14 Pavel Roskin <proski@gnu.org>
-
- * stage2/shared.h (ENTRY): Remove unnecessary `##'.
-
-2001-05-03 Jochen Hoenicke <jochen@gnu.org>
-
- * grub/asmstub.c (biosdisk): Work around a bug in linux's ez
- remapping. Problem reported by Ben Byer <bbyer@rice.edu>.
-
-2001-03-28 Gordon Matzigkeit <gord@fig.org>
-
- * stage2/boot.c (load_image): Don't cast entry_addr to an int, or
- the top bit will be interpreted as the sign.
-
-2001-03-16 OKUJI Yoshinori <okuji@gnu.org>
-
- From Bodo Rueskamp <br@itchigo.com>:
- * stage2/boot.c (load_initrd): Avoid the last 64kb for
- Linux 2.2.x bug.
-
-2001-03-03 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/multiboot.texi (History): Written.
-
-2001-02-28 OKUJI Yoshinori <okuji@gnu.org>
-
- From HASEGAWA Tomoki <thasegawa@mta.biglobe.ne.jp>:
- * lib/device.c (get_ide_disk_name) [__FreeBSD__]: Add support
- for FreeBSD-4.0 or later. Use "/dev/rad0".
- * util/grub-install.in (convert): Add code for FreeBSD
- disklabels.
-
-2001-02-28 OKUJI Yoshinori <okuji@gnu.org>
-
- From Thierry Laronde <thierry@cri74.org>:
- * stage2/stage2.c (cmain): If the default entry is wrong, set it
- to FALLBACK_ENTRY if FALLBACK_ENTRY is valid, otherwise set it
- to zero. Suggested by Nicolas Boos <nicolas.boos@wanadoo.fr>.
-
-2001-02-28 OKUJI Yoshinori <okuji@gnu.org>
-
- * acconfig.h (AUTO_LINUX_MEM_OPT): New entry.
- * configure.in (--disable-auto-linux-mem-opt): New option.
- * stage2/builtins.c (kernel_func) [!AUTO_LINUX_MEM_OPT]: Add
- KERNEL_LOAD_NO_MEM_OPTION into LOAD_FLAGS, whether the user
- specifies --no-mem-option or not.
-
-2001-02-27 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (chainloader_func): Don't check if the
- current partition is FAT, but check if it has a FAT partition
- type and the BPB has a system id starting with "MSWIN".
-
-2001-02-27 OKUJI Yoshinori <okuji@gnu.org>
-
- Added hercules support based on a patch by Frank Mehnert
- <fm3@os.inf.tu-dresden.de>. I translated his assembly code into
- C, and separated hercules from the normal console.
-
- * configure.in (--disable-hercules): New option.
-
- * grub/asmstub.c: Include <hercules.h>.
- (set_attrib): Renamed to ...
- (console_set_attrib): ... this.
- (herc_cls): New function.
- (herc_getxy): Likewise.
- (herc_gotoxy): Likewise.
- (herc_putchar): Likewise.
- (herc_set_attrib): Likewise.
-
- * stage2/Makefile.am (noinst_HEADERS): Added hercules.h.
- (libgrub_a_CFLAGS): Added -DSUPPORT_HERCULES=1.
- (HERCULES_FLAGS): New variable.
- (STAGE2_COMPILE): Added $(HERCULES_FLAGS).
- (pre_stage2_exec_SOURCES): Added hercules.c.
- * stage2/asm.S [!STAGE1_5] (set_attrib) Renamed to ...
- [!STAGE1_5] (console_set_attrib): ... this.
- * stage2/builtins.c [SUPPORT_HERCULES] (terminal_func): Added
- hercules support.
- (builtin_table) [SUPPORT_HERCULES]: Added a pointer to
- BUILTIN_TERMINAL.
- * stage2/char_io.c [SUPPORT_HERCULES]: Include <hercules.h>.
- [!STAGE1_5] (get_cmdline) [SUPPORT_HERCULES]: Added hercules
- support.
- [!STAGE1_5] (getkey) [SUPPORT_HERCULES]: Likewise.
- [!STAGE1_5] (checkkey) [SUPPORT_HERCULES]: Likewise.
- (grub_putchar) [SUPPORT_HERCULES]: Likewise.
- [!STAGE1_5] (gotoxy) [SUPPORT_HERCULES]: Likewise.
- [!STAGE1_5] (getxy) [SUPPORT_HERCULES]: Likewise.
- [!STAGE1_5] (cls) [SUPPORT_HERCULES]: Likewise.
- (set_attrib): New function.
- * stage2/shared.h (console_set_attrib): Declared.
- (TERMINAL_HERCULES): New macro.
- * stage2/stage2.c (run_menu) [SUPPORT_HERCULES]: Added hercules
- support.
- * stage2/hercules.h: New file.
- * stage2/hercules.c: Likewise.
-
-2001-02-17 OKUJI Yoshinori <okuji@gnu.org>
-
- From "Treutwein; Bernhard"
- <Bernhard.Treutwein@Verwaltung.Uni-Muenchen.DE>:
- * docs/grub.texi (DOS/Windows): Improved the readability.
-
-2001-02-11 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/grub.texi (Command-line and menu commands): Renamed to ...
- (General commands): ... this.
-
-2001-02-08 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/asm.S [STAGE1_5] (chain_stage2): Save the second sector
- of stage2 in %ecx temporarily, and set %ebp to %ecx after
- switching to protected mode. I forgot that %ebp is broken by
- rot_to_real. Reported by Torvald Riegel
- <tr16@inf.tu-dresden.de>.
-
-2001-02-08 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/grub-new.texi: Moved to ...
- * docs/grub.texi: ... here. And, include internals.texi.
- * docs/internals.texi: New file.
- * docs/prog-ref.texi: Removed.
- * docs/user-ref.texi: Likewise.
- * docs/tutorial.texi: Likewise.
- * docs/appendices.texi: Likewise.
- * docs/Makefile.am (grub_TEXINFOS): Removed prog-ref.texi,
- user-ref.texi, tutorial.texi, and appendices.texi. Added
- internals.texi.
-
-2001-02-03 OKUJI Yoshinori <okuji@gnu.org>
-
- From Erik Schoenfelder <schoenfr@gaertner.de>:
- * stage2/shared.h (LINUX_INITRD_MAX_ADDRESS): Changed from
- 0x3C000000 to 0x38000000.
-
-2001-02-03 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (savedefault_func)
- [!SUPPORT_DISKLESS && !GRUB_UTIL]: Check if the version
- contained in the buffer matches to current one as well.
-
-2001-02-02 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (savedefault_func)
- [!SUPPORT_DISKLESS && !GRUB_UTIL]: Check if the stage2 id is
- STAGE2_ID_STAGE2. Suggested by Jochen Hoenicke.
-
- * stage2/stage2.c (cmain): If DEFAULT_ENTRY is out of entries,
- reset DEFAULT_ENTRY to zero.
-
-2001-02-02 OKUJI Yoshinori <okuji@gnu.org>
-
- Make savedefault workable even with Stage 1.5. Reported by
- Thierry Laronde <thierry@cri74.org>.
-
- * grub/asmstub.c (chain_stage2): Added an additional argument,
- SECOND_SECTOR.
- * stage2/asm.S [STAGE1_5] (chain_stage2): Set %ebp to
- SECOND_SECTOR.
- * stage2/disk_io.c [STAGE1_5] (disk_read_hook): Defined.
- [STAGE1_5] (disk_read_func): Likewise.
- (rawread) [STAGE1_5]: Handle DISK_READ_FUNC.
- (grub_read) [STAGE1_5]: Likewise.
- * stage2/fsys_ext2fs.c (ext2fs_read) [STAGE1_5]: Likewise.
- * stage2/fsys_fat.c (fat_read) [STAGE1_5]: Likewise.
- * stage2/fsys_ffs.c (ffs_read) [STAGE1_5]: Likewise.
- * stage2/fsys_minix.c (minix_read) [STAGE1_5]: Likewise.
- * stage2/fsys_reiserfs.c (reiserfs_read) [STAGE1_5]: Likewise.
-
-2001-02-02 OKUJI Yoshinori <okuji@gnu.org>
-
- * netboot/config.c [GRUB && INCLUDE_PCI] (pci_dispatch_table):
- New structure.
- [GRUB && INCLUDE_PCI] (PCI_NIC): New variable.
- (eth_probe) [GRUB && INCLUDE_PCI]: If a PCI NIC candidate is
- present, probe it first.
-
-2001-01-27 OKUJI Yoshinori <okuji@gnu.org>
-
- From Danilo Godec <danci@agenda.si>:
- * stage2/pc_slice.h (PC_SLICE_TYPE_LINUX_RAID): New macro.
- * stage2/fsys_ext2fs.c (ext2fs_mount): Add a check for
- PC_SLICE_LINUX_RAID.
-
-2001-01-27 OKUJI Yoshinori <okuji@gnu.org>
-
- From Bernhard Treutwein
- <Bernhard.Treutwein@Verwaltung.Uni-Muenchen.DE>:
- * docs/grub-new.texi (DOS/Windows): Made more readable.
-
-2001-01-27 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/multiboot.texi: Start reorganizing Multiboot
- Specification.
-
-2001-01-15 OKUJI Yoshinori <okuji@gnu.org>
-
- From Thierry Laronde <thierry.laronde@polynum.com>:
- * docs/user-ref.texi (Command-line and menu commands): Update
- the description about setkey.
- * stage2/builtins.c (setkey_func): When checking if TO_KEY and
- FROM_KEY are specified, see *TO_KEY and *FROM_KEY instead of
- TO_KEY and FROM_KEY, respectively.
-
-2001-01-13 OKUJI Yoshinori <okuji@gnu.org>
-
- From Thierry Laronde <thierry.laronde@polynum.com>:
- * util/grub-md5-crypt.in (prefix): New variable.
- (exec_prefix): Likewise.
- (sbindir): Likewise.
-
-2001-01-12 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/multiboot.h [__ELF__] (MULTIBOOT_HEADER_FLAGS): Defined
- as 0x00000003 instead of 0x00010003.
- * docs/boot.S (multiboot_header) [__ELF__]: Don't define a.out
- kludge information.
-
- * docs/Makefile.am (EXTRA_PROGRAMS): New variable.
- [BUILD_EXAMPLE_KERNEL] (noinst_DATA): Removed.
- [BUILD_EXAMPLE_KERNEL] (noinst_PROGRAMS): Changed to kernel.
- [BUILD_EXAMPLE_KERNEL] (kernel_exec_SOURCES): Renamed to ...
- [BUILD_EXAMPLE_KERNEL] (kernel_SOURCES): ... this.
- [BUILD_EXAMPLE_KERNEL] (kernel_exec_CFLAGS): Renamed to ...
- [BUILD_EXAMPLE_KERNEL] (kernel_CFLAGS): ... this.
- [BUILD_EXAMPLE_KERNEL] (kernel_exec_LDFLAGS): Renamed to ...
- [BUILD_EXAMPLE_KERNEL] (kernel_LDFLAGS): ... this.
- [BUILD_EXAMPLE_KERNEL] (kernel): Removed.
- [BUILD_EXAMPLE_KERNEL] (boot.o): New dependency.
- (CLEANFILES): New variable.
-
-2001-01-11 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c [SUPPORT_NETBOOT] (ifconfig_func): Always
- print current network configuration.
- [SUPPORT_NETBOOT] (tftpserver_func): Use ifconfig instead of
- arp_server_override.
- * netboot/main.c (arp_server_override): Removed.
- * netboot/etherboot.h (arp_server_override): Likewise.
-
-2001-01-11 Eugene Doudine <dudin@np.nk.nornik.ru>
-
- * stage2/builtins.c [SUPPORT_NETBOOT] (ifconfig_func): New
- function to configure network interface from command line.
- [SUPPORT_NETBOOT] (builtin_ifconfig): New variable.
- [SUPPORT_NETBOOT] (builtin_table): Added a pointer to
- BUILTIN_IFCONFIG.
- * netboot/main.c (ifconfig): New function.
- * netboot/etherboot.h (ifconfig): Added the prototype.
-
-2001-01-11 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/Makefile.am [BUILD_EXAMPLE_KERNEL] (noinst_DATA): New
- variable.
- [BUILD_EXAMPLE_KERNEL] (noinst_PROGRAMS): Likewise.
- [BUILD_EXAMPLE_KERNEL] (kernel_exec_SOURCES): Likewise.
- [BUILD_EXAMPLE_KERNEL] (kernel_exec_CFLAGS): Likewise.
- [BUILD_EXAMPLE_KERNEL] (kernel_exec_LDFLAGS): Likewise.
- [BUILD_EXAMPLE_KERNEL] (kernel): New target.
- * configure.in (--enable-example-kernel): New option.
-
- * docs/kernel.c (cmain): Cast unsigned long variables to
- unsigned explicitly, to suppress GCC warnings.
-
-2001-01-08 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/shared.h (BOOTSEC_BPB_HIDDEN_SECTORS): New macro.
-
- * stage2/builtins.c (chainloader_func): If CURRENT_PARTITION is
- FAT, set the hidden sectors field of the BPB to PART_START, to
- avoid a Windows bug which affects only when Windows is booted
- from a logical partition. And, clear ERRNUM after testing if a
- partition is FAT, because open_partition or fat_mount may set
- ERRNUM. Reported by Ingo Korb <ingo@akana.de>.
-
-2001-01-07 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (boot_func): In the chain-loading mode,
- clear the active flag of each of the loaded partition entries,
- and then set the active flag of the booted partition image.
-
-2001-01-04 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/builtins.c (embed_func): Call open_partition() even for
- MBR, so that part_start is correct. This fixes a bug reported by
- Matthias Granberry <matthias@slurpee.org>.
-
-2000-12-22 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/disk_io.c (make_saved_active): Change the variable name
- ``MBR'' to lower case.
- (set_partition_hidden_flag): Likewise.
-
-2000-12-20 Jochen Hoenicke <jochen@gnu.org>
-
- From Cedric Ware <ware@com.enst.fr>:
- * stage2/fsys_ext2.c (ext2fs_mount): Detect ext2 partitions in
- a OpenBSD/NetBSD FS_EXT2FS slice.
- * stage2/pc_slice.h (FS_ADOS): New Macro from OpenBSD/NetBSD.
- (FS_HFS): Likewise.
- (FS_FILECORE): Likewise.
- (FS_EXT2FS): Likewise.
-
-2000-12-17 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/disk_io.c (rawread): Check if there is a EZD partition
- and remap sector 0 to sector 1 like EZ-BIOS does.
- (rawwrite): New function to write to disk. Also does EZD
- remapping.
- (devwrite): New function. Does the special remapping to
- partitions needed for linux. This contains the code that was
- previously duplicated in embed_func and install_func at several
- places.
- (make_saved_active): Use rawwrite. Don't use SCRATCHSEG, as it is
- needed by devwrite.
- (set_partition_hidden_flag): Likewise.
- * stage2/disk_io.h (rawwrite): New function.
- (devwrite): Likewise.
- * stage2/pc_slice.h (PC_SLICE_TYPE_EZD): New macro.
- * stage2/builtins.c (embed_info): New variable to store the
- position of the embedded stage1_5 for setup_func.
- (embed_func): Don't embed after the MBR if an EZ-BIOS is detected
- there. Use the new devwrite method. If embedding is successful
- store position in embed_info.
- (install_func): Use devwrite. Don't use SCRATCHSEG.
- (partnew_func): Use rawwrite. Don't use SCRATCHSEG.
- (parttype_func): Likewise.
- (savedefault_func): Likewise.
- (setup_func): New nested function embed_stage1_5. Stage1_5 is now
- also be embedded into filesystems which supports that.
-
-2000-12-17 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (chainloader_func): Set ERRNUM to
- ERR_EXEC_FORMAT, when ERRNUM is ERR_NONE, even if grub_read
- fails in reading one sector.
-
-2000-12-14 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/prog-ref.texi (Partition types): Rewrite the footnotes.
- Suggested by Ralf.Medow@t-online.de (Ralf Medow).
-
-2000-12-14 OKUJI Yoshinori <okuji@gnu.org>
-
- From Erik Schoenfelder <schoenfr@gaertner.de>:
- * util/grub-install.in (convert): Revised the fix for floppy
- device handling.
-
-2000-12-14 OKUJI Yoshinori <okuji@gnu.org>
-
- From HORIKAWA Kazunori <kaz-hori@tkd.att.ne.jp>:
- * stage2/bios.c (get_diskinfo): Append 16 bytes dummy data to
- DRP, because the BIOS of Thinkpad X20 write a garbage beyond the
- size of the structure.
-
-2000-12-09 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/disk_io.c (next_partition): Mask out bsd partition sub
- type when checking if last partition was a bsd partition.
- Reported by Heikki Vatiainen <hessu@cs.tut.fi>.
-
-2000-12-09 OKUJI Yoshinori <okuji@gnu.org>
-
- From Leendert Meyer <leen.meyer@home.nl>:
- * util/grub-install.in (convert): If a floppy device is
- specified, remove everything from $tmp_part.
-
-2000-12-09 OKUJI Yoshinori <okuji@gnu.org>
-
- * lib/device.c [__linux__] (write_to_partition): Use strcpy
- instead of strcat, to overwrite "/disc". Reported by Thiago
- Macieira <thiagom@mail.com>.
-
-2000-12-05 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/fsys_minix.c (minix_mount): Corrected the check for
- IS_PC_SLICE_TYPE_MINIX; minix was only working if slice type was
- wrong! Reported by Ralf Medow <ralf.medow@t-online.de>.
-
-2000-11-27 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/fsys_reiserfs.c: Handle items with old version key on
- new version reiserfs partition.
- (K_OFFSET): Removed.
- (IH_KEY_OFFSET): New Macro, which checks item head version.
- (IH_KEY_ISOFFSET): Likewise.
- (reiserfs_read): Use new macros.
- (reiserfs_dir): Fixed version check for >4GB stat entries.
-
-2000-11-27 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/common.c (init_bios_info) [!STAGE1_5]: Don't call
- track_int13, because the current implementation hangs up in some
- environments.
-
-2000-11-27 OKUJI Yoshinori <okuji@gnu.org>
-
- * grub/asmstub.c (serial_init) [!O_SYNC]: Don't specify O_SYNC
- to open SERIAL_DEVICE.
- (serial_init) [O_FSYNC]: Specify O_FSYNC to open SERIAL_DEVICE.
- Reported by Farid Hajji <farid.hajji@ob.kamp.net>.
-
-2000-11-22 OKUJI Yoshinori <okuji@gnu.org>
-
- From Vesa Jaaskelainen <jaaskela@tietomyrsky.fi>:
- * stage2/builtins.c (testvbe_func): Don't set the bit 14 of a
- VBE mode number explicitly when calling get_vbe_mode_info.
- (vbeprobe_func): Likewise.
-
-2000-11-22 OKUJI Yoshinori <okuji@gnu.org>
-
- The code for the "INT 13H tracking technique" is somewhat
- simplified.
-
- * stage2/asm.S [!STAGE1_5] (track_int13): Don't replace an int13
- handler with set_tf_int13_handler. Instead, track_int13 itself
- emulates an int13 interrupt.
- [!STAGE1_5] (set_tf_int13_handler): Removed.
- [!STAGE1_5] (int1_handler): Use movzbw instead of xorb and movb.
-
-2000-11-15 OKUJI Yoshinori <okuji@gnu.org>
-
- * acconfig.h (PRESET_MENU_STRING): New entry.
- * acinclude.m4 (grub_DEFINE_FILE): New M4 macro.
- * configure.in (--enable-preset-menu): New option.
- * stage2/stage2.c [PRESET_MENU_STRING] (preset_menu): New
- variable.
- [PRESET_MENU_STRING] (preset_menu_offset): Likewise.
- [PRESET_MENU_STRING] (open_preset_menu): New function.
- [PRESET_MENU_STRING] (read_from_preset_menu): Likewise.
- [PRESET_MENU_STRING] (close_preset_menu): Likewise.
- [!PRESET_MENU_STRING] (open_preset_menu): New macro.
- [!PRESET_MENU_STRING] (read_from_preset_menu): Likewise.
- [!PRESET_MENU_STRING] (close_preset_menu): Likewise.
- (get_line_from_config): Accept a new argument READ_FROM_FILE.
- If it is false, read data from the preset menu instead.
- (cmain): If grub_open fails in opening the configuration file,
- then try to open the preset menu.
-
-2000-11-11 OKUJI Yoshinori <okuji@gnu.org>
-
- From Jan Fricke <fricke@uni-greifswald.de>:
- * stage2/asm.S [!STAGE1_5] (set_vbe_mode): Add a missing `$'
- prefix.
-
-2000-11-11 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/bios.c (get_diskinfo): If BIOS supports LBA but doesn't
- return the correct total number of sectors, compute this by
- C/H/S returned by get_diskinfo_int13_extensions instead of
- get_diskinfo_standard.
-
-2000-11-09 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/disk_io.c (make_saved_active): Set ERRNUM to
- ERR_DEV_VALUES instead of ERR_NO_PART, when the save partition
- is not a primary partition.
-
-2000-11-05 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/user-ref.texi (Features): Update the URL of grub/98.
-
-2000-11-03 OKUJI Yoshinori <okuji@gnu.org>
-
- VBE support is _partially_ implemented.
-
- * stage2/mb_header.h (multiboot_header): Added new fields,
- mode_type, width, height, and depth.
- (MULTIBOOT_FOUND): Check if MULTIBOOT_VIDEO_MODE is set, and
- check if LEN is greater than or equal to 48, if set.
- (MULTIBOOT_UNSUPPORTED): Set to 0x0000FFF8.
- (MULTIBOOT_VIDEO_MODE): New macro.
- * stage2/mb_info.h (multiboot_info): Added new fields,
- vbe_control_info, vbe_mode_info, vbe_mode, vbe_interface_seg,
- vbe_interface_off, and vbe_interface_len.
- (MB_INFO_VIDEO_INFO): New macro.
-
- * stage2/shared.h (vbe_controller): New structure.
- (vbe_mode): Likewise.
- (get_vbe_controller_info): Declared.
- (get_vbe_mode_info): Likewise.
- (set_vbe_mode): Likewise.
- * stage2/asm.S [!STAGE1_5] (get_vbe_controller_info): New
- function.
- [!STAGE1_5] (get_vbe_mode_info): Likewise.
- [!STAGE1_5] (set_vbe_mode): Likewise.
- * grub/asmstub.c (get_vbe_controller_info): Likewise.
- (get_vbe_mode_info): Likewise.
- (set_vbe_mode): Likewise.
-
- * stage2/builtins.c (testvbe_func): New function.
- (builtin_testvbe): New variable.
- (vbeprobe_func): New function.
- (builtin_vbeprobe): New variable.
- (builtin_table): Added pointers to BUILTIN_TESTVBE and
- BUILTIN_VBEPROBE.
-
-2000-11-01 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/help2man: Copied from help2man-1.23.
-
-2000-10-29 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/asm.S [STAGE1_5]: Don't include setjmp.S or apm.S.
-
-2000-10-27 OKUJI Yoshinori <okuji@gnu.org>
-
- * lib/device.c (read_device_map): Don't parse a line, if it is
- empty. Reported by Holger Bauer <bauer@itsm.uni-stuttgart.de>.
-
-2000-10-25 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/builtins.c (md5crypt_func): Use all bits of currticks ()
- to generate the salt. The old code would often produce the same
- one character salt.
-
-2000-10-25 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/apm.S (get_apm_info): Fix a serious typo: prot_to_real
- -> real_to_prot. Umm, I can't understand why it worked for me!
-
-2000-10-24 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/builtins.c (setup_func): When invoking install with an
- embedded stage1_5 give the path to menu.lst as real_config_file.
-
-2000-10-23 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/multiboot.texi: Upgraded to 0.6.92.
- (Boot information format): Re-designed the graphics table.
-
-2000-10-22 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/tutorial.texi: Miscellaneous updates.
- * docs/user-ref.texi: Likewise.
- * docs/appendices.texi: Likewise.
-
-2000-10-22 OKUJI Yoshinori <okuji@gnu.org>
-
- * util/grub-install.in (usage): Removed unnecessary commas.
-
- * util/grub-md5-crypt.in: New file.
- * util/Makefile.am (sbin_SCRIPTS): Added grub-md5-crypt.
- * configure.in (AC_OUTPUT): Added util/grub-md5-crypt.
- * docs/Makefile.am (man_MANS): Added grub-md5-crypt.8.
- [MAINTAINER_MODE] ($(srcdir)/grub-md5-crypt.8): New target.
- * docs/grub-md5-crypt.8: New file. Generated by help2man.
-
- * docs/grub.texi (grub-md5-crypt): New direntry.
- (Invoking grub-md5-crypt): New entry.
- * docs/user-ref.texi (Invoking grub-md5-crypt): New chapter.
-
-2000-10-22 OKUJI Yoshinori <okuji@gnu.org>
-
- From Matthias Granberry <matthias@slurpee.org>:
- * util/grub-install.in (convert): Added backslashes into
- continuous lines.
-
-2000-10-21 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/md5.c (check_md5_password): Removed.
- (md5_password): New function. Mostly copied from
- check_md5_password.
- (md5_init): Made static.
- (md5_update): Likewise.
- (md5_final): Likewise.
- * stage2/md5.h (check_md5_password): Changed to just a macro.
- (md5_password): Declared.
- (make_md5_password): New macro.
- * stage2/char_io.c [!STAGE1_5] (grub_strstr): Rewriten, because
- it was too buggy.
- * stage2/builtins.c [USE_MD5_PASSWORDS] (md5crypt_func): New
- function.
- [USE_MD5_PASSWORDS] (builtin_md5crypt): New variable.
- (builtin_table) [USE_MD5_PASSWORDS]: Added a pointer to
- BUILTIN_MD5CRYPT.
- * docs/tutorial.texi (Security): Added a paragraph about
- md5crypt.
-
-2000-10-21 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/user-ref.texi: Fixed several typos and some inappropriate
- texinfo commands, and update the descriptions about some
- commands.
-
-2000-10-20 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (displayapm_func): New function.
- (builtin_displayapm): New variable.
- (builtin_table): Added a pointer to BUILTIN_DISPLAYAPM.
-
-2000-10-20 OKUJI Yoshinori <okuji@gnu.org>
-
- APM BIOS table support is added, based on a patch by Matt Yourst
- <yourst@mit.edu>.
-
- * docs/multiboot.texi (Boot information format): Added the
- definition of APM table format.
-
- * stage2/mb_info.h (apm_info): New structure.
- (multiboot_info): Added a new element, apm_table.
- (MB_INFO_APM_TABLE): New macro.
- * stage2/asm.S (apm_bios_info): New variable.
- Include "apm.S".
- * stage2/apm.S: New file.
- * stage2/common.c (init_bios_info) [!STAGE1_5]: Added APM BIOS
- table support.
- * stage2/shared.h (apm_bios_info): Declared.
- (get_apm_info): Likewise.
- * stage2/Makefile.am (EXTRA_DIST): Added apm.S.
- * grub/asmstub.c (apm_bios_info): New variable.
- (get_apm_info): New function.
-
-2000-10-19 OKUJI Yoshinori <okuji@gnu.org>
-
- Segregate functions which are copyrighted differently.
-
- * stage2/setjmp.S: New file.
- * stage2/Makefile.am (EXTRA_DIST): Added setjmp.S.
- * stage2/asm.S: Include "setjmp.S".
- (grub_setjmp): Moved to ...
- * stage2/setjmp.S (grub_setjmp): ... here.
- * stage2/asm.S (grub_longjmp): Moved to ...
- * stage2/setjmp.S (grub_longjmp): ... here.
-
-2000-10-18 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/Makefile.am (noinst_HEADERS): Added md5.h. Reported by
- Volker Augustin <Volker.Augustin@stud.uni-regensburg.de>.
-
-2000-10-17 OKUJI Yoshinori <okuji@gnu.org>
-
- * configure.in (--disable-md5password): Renamed to ...
- (--disable-md5-password): ... this. Just for my preference.
-
-2000-10-17 Jochen Hoenicke <jochen@gnu.org>
-
- Added MD5 passwords and extended password command:
-
- * configure.in (--disable-md5password): New option.
- * stage2/Makefile.am (libgrub_a_SOURCES): Added md5.c.
- (pre_stage2_exec_SOURCES): Likewise.
- * stage2/md5.c: New file.
- * stage2/shared.h (password_t): New type.
- (password_type): New variable.
- (BUILTIN_HIDDEN): New flag, describing that a command should not
- be printed when booting the entry.
- (check_password): New function.
- * stage2/cmdline.c (run_script): Don't show commands that have
- the hidden attribute.
- * stage2/builtins.c (password_type): New variable.
- (check_password): New function.
- (password_func): Handle the --md5 option and set password_type.
- Check if in CMDLINE or SCRIPT mode and ask password immediately.
- (builtin_password): Also allow passwords in CMDLINE mode, make
- it hidden, so the user wont see the password he should enter.
- Changed command description.
- (builtin_pause): Make the command hidden.
- (pause_func): Print argument, since the command is now hidden.
- * stage2/stage2.c (run_menu): Call check_password to check password.
- * docs/tutorial.texi (Security): Describe the new features of the
- password commands.
- * docs/user-ref.texi (Menu-specific commands): password command
- moved ...
- (Command-line and menu commands): ... to here. New features
- doumented.
-
-2000-10-17 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (setkey_func): Clear the all elements of
- BIOS_KEY_MAP and ASCII_KEY_MAP instead of only the first
- elements, when TO_KEY is NULL.
-
-2000-10-16 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/boot.c (load_image): When handling Linux cmdline, don't
- copy a null character from SRC to DEST, because this inserted an
- extra null character into the cmdline. Reported by Robert
- Bihlmeyer <robbe@orcus.priv.at>.
-
-2000-10-16 OKUJI Yoshinori <okuji@gnu.org>
-
- Some of the new Multiboot features are supported. APM support
- and VESA support are not strictly defined or implemented yet.
-
- * docs/multiboot.texi (Top): Increase the version number.
- (Boot information format): Changed the drive information format,
- because it was not straightforward.
-
- * grub/asmstub.c (io_map): New variable.
- (track_int13): New function.
- (get_rom_config_table): Likewise.
- * stage2/stage2.c (cmain): Set CONFIG_ENTRIES to MBI.DRIVES_ADDR
- + MBI.DRIVES.LENGTH instead of MBI.MMAP_ADDR + MBI.MMAP_LENGTH.
- * stage2/common.c (init_bios_info) [!STAGE1_5]: Added support
- for drive info, ROM config table, and boot loader name features
- of the Multiboot Specification.
- * stage2/mb_info.h (drive_info): New structure.
- (MB_DI_CHS_MODE): New macro.
- (MB_DI_LBA_MODE): Likewise.
- (multiboot_info): Added drives_length, drives_addr,
- config_table, and boot_loader_name.
- (MB_INFO_DRIVE_INFO): New macro.
- (MB_INFO_CONFIG_TABLE): Likewise.
- (MB_INFO_BOOT_LOADER_NAME): Likewise.
- * stage2/asm.S (get_rom_config_table): New function.
- * stage2/shared.h (get_rom_config_table): Declared.
-
-2000-10-16 OKUJI Yoshinori <okuji@gnu.org>
-
- * util/grub-install.in (convert): Check only if the file exists,
- instead of checking if the file is a block device as well.
- Because, in a sane operating system, it should be a char device
- but not a block device (unlike Linux), and it may be a symbolic
- link (this can happen if you use Linux's devfs without devfsd).
- (recheck): New variable. Set to "no" by default, and set to
- "yes", if you specify the new option ``--recheck''. If $recheck
- is "yes", remove the device map file, if present.
-
-2000-10-16 OKUJI Yoshinori <okuji@gnu.org>
-
- From Roderich Schupp:
- * lib/device.c: Include <limits.h>.
- [__linux__] (have_devfs): New function.
- (get_floppy_disk_name) [__linux__]: If devfs is supported, use
- the name "/dev/floppy/N" instead.
- (init_device_map) [__linux__]: If devfs is supported, use
- "/dev/discs/discN" instead.
- [__linux__] (write_to_partition): Change the size of DEV to
- PATH_MAX instead of 64.
- If devfs is supported, replace "/disc" in the device name with
- "/part".
-
-2000-10-15 OKUJI Yoshinori <okuji@gnu.org>
-
- From Roderich Schupp <rsch@ExperTeam.de>:
- * util/grub-install.in (convert): Added support for "native"
- devfs device names.
-
-2000-10-14 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/tutorial.texi (Serial terminal): Fixed a typo.
- * docs/user-ref.texi (GRUB images): New chapter.
- * docs/grub.texi: Added an entry for the chapter "GRUB images".
-
-2000-10-14 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (setkey_func): If TO_KEY is NULL (i.e. the
- user specifies no argument), clear BIOS_KEY_MAP and
- ASCII_KEY_MAP.
- If TO_KEY is non-NULL but FROM_KEY is NULL, set ERRNUM to
- ERR_BAD_ARGUMENT and return one.
-
-2000-10-13 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/grub.texi: Added an entry for the new chapter "Security",
- and the order of the chapters in the Tutorial Manual was
- changed.
- * docs/tutorial.texi (Configuration): Moved to right after the
- chapter "Booting".
- (Security): New chapter.
-
-2000-10-10 OKUJI Yoshinori <okuji@gnu.org>
-
- From Alessandro Rubini:
- * util/grub-install.in (root_device): Use the regular expression
- 's%.*\(/dev/[^ ]*\).*%\1%' instead of
- 's%.*\(/dev/[a-z0-9]*\).*%\1%'.
- (bootdir_device): Likewise.
- (grubdir_device): Likewise.
-
-2000-10-10 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/start.S (copy_buffer): Use pusha and popa instead of
- pushing and poping %di and %si individually, to reduce the code
- size and save %cx as well. Reported by Herbert Nachtnebel
- <nachtneb@iaee.tuwien.ac.at>.
-
-2000-10-10 OKUJI Yoshinori <okuji@gnu.org>
-
- From Daniel Pittman <daniel@rimspace.net>:
- * stage2/builtins.c (setkey_func): Check if
- KEYSYM_TABLE[I].UNSHIFTED_NAME and KEYSYM_TABLE[I].SHIFTED_NAME
- are not NULLs, before calling grub_strcmp.
-
-2000-10-08 OKUJI Yoshinori <okuji@gnu.org>
-
- * util/grub-install.in (grub_prefix): New variable. The default
- is "/boot/grub".
- If the user has a separate boot partition, set grub_prefix
- instead of grubdir to "/grub".
- When running the command "setup", specify $grub_prefix instead
- of $grubdir to the option "--prefix".
- Report by Thierry Laronde.
-
-2000-10-08 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (find_func): Clear ERRNUM after the last
- call of next_partition, because it always sets ERRNUM. Reported
- by Thierry Laronde <thierry.laronde@polynum.com>.
-
-2000-10-07 OKUJI Yoshinori <okuji@gnu.org>
-
- * lib/device.c [__linux__] (write_to_partition): Open DEV with
- O_RDWR instead of O_ORONLY.
-
-2000-10-06 Alessandro Rubini <rubini@gnu.org>
-
- * docs/user-ref.texi (Commands): Added missing commands and
- reworded part of the text.
-
- * stage2/builtins.c (serial_func): Unswap the setting of "speed"
- and "port".
-
-2000-10-06 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (setup_func): Append "... " to the
- messages when calling embed_func and install_func, and print
- the result.
- Don't jump to the label "fail", even when embed_func failed.
-
-2000-10-05 Gordon Matzigkeit <gord@fig.org>
-
- * stage2/disk_io.c (real_open_partition): Make sure that buf_geom
- corresponds to the current drive before using it.
-
- * lib/device.c (get_drive_geometry): Use fstat if the native
- geometry methods fail, such as when the drive is mapped to a
- regular file.
-
- * docs/tutorial.texi: Add `@kbd{...}' to examples in order to
- differentiate between command output and characters the user
- should type.
- * docs/user-ref.texi: Likewise.
-
-2000-10-05 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/grub.texi: Added an entry for the chapter "Serial
- terminal".
- * docs/tutorial.texi (Serial terminal): New chapter.
-
-2000-10-04 Gordon Matzigkeit <gord@fig.org>
-
- * util/grub-image (VERSION): Fix version calculation to tolerate
- `(GNU GRUB 0.5.96)'-style versions.
-
- * docs/grub.texi: Remove braces from `@unnumbered' sections so
- that texi2html doesn't complain.
-
- * debian/rules: Build HTML documentation to appease the Debian
- masses.
-
-2000-10-04 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/fsys_reiserfs.c (reiserfs_mount): Compare PART_LENGTH
- with SUPERBLOCK + (sizeof(super) >> SECTOR_BITS) instead of
- sizeof(struct reiserfs_super_block). Reported by Jochen
- Hoenicke.
-
-2000-10-05 OKUJI Yoshinori <okuji@gnu.org>
-
- * configure.in (AM_INIT_AUTOMAKE): The version number is set to
- 0.5.97. This version number is a dummy, as we will never release
- 0.5.97 actually.
-
-2000-10-01 OKUJI Yoshinori <okuji@gnu.org>
-
- * lib/device.c [__linux__]: Don't include <linux/cdrom.h>.
- [__linux__ && !CDROM_GET_CAPABILITY] (CDROM_GET_CAPABILITY):
- Defined as 0x5331.
-
-2000-10-01 OKUJI Yoshinori <okuji@gnu.org>
-
- * lib/device.c (get_drive_geometry) [__GNU__]: Get the number of
- total sectors by fstat. The rest are filled with arbitrary
- values.
-
-2000-09-30 OKUJI Yoshinori <okuji@gnu.org>
-
- * util/grub-install.in (convert): The code for gnu* (i.e.
- GNU/Hurd) was rewritten, since it didn't work for BSD
- partitions.
- Use "$tmp_disk *$" instead of "$tmp_disk" to get the drive name.
-
-2000-09-30 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/fsys_reiserfs.c (reiserfs_mount): Check if the length
- of the partition is less than the size of a super block, before
- attempting to read the super block.
-
- * grub/asmstub.c (console_putchar)
- [HAVE_LIBCURSES_H && REFRESH_IMMEDIATELY]: Call refresh, to ease
- debugging.
-
-2000-09-30 OKUJI Yoshinori <okuji@gnu.org>
-
- Added two new commands, "partnew" and "parttype", based on the
- patch by Stefan Ondrejicka <ondrej@idata.sk>:
- * stage2/builtins.c (partnew_func): New function.
- (builtin_partnew): New variable.
- (parttype_func): New function.
- (builtin_parttype): New variable.
- (builtin_table): Added pointers to BUILTIN_PARTNEW and to
- BUILTIN_PARTTYPE.
-
-2000-09-29 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (find_func): New variable GOT_FILE is set to
- one if FILENAME is found. Otherwise, it is set to zero.
- Clear ERRNUM at the end in the loop for floppies, to ensure that
- ERRNUM is cleared before examining hard disks.
- Rewrite the loop for hard disks using next_partitions, so this
- function now checks all partitions you have certainly.
- If GOT_FILE is non-zero, set ERRNUM to ERR_FILE_NOT_FOUND and
- return one.
-
-2000-09-29 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/disk_io.c (check_BSD_parts): Removed.
- (next_partition): New function.
- (real_open_partition): Rewritten using next_partition.
- (set_device) [!STAGE1_5]: Skip a comma in DEVICE, even when the
- BSD partition is not specified.
- [!STAGE1_5] (print_completions): Don't append ')' if the
- partition is a PC slice which may have BSD partitions. Instead,
- try to complete the command-line with possible partitions.
- * stage2/shared.h (next_partition): Declared.
-
-2000-09-27 OKUJI Yoshinori <okuji@gnu.org>
-
- * configure.in (--enable-serial): Changed to ...
- (--disable-serial): ... this. Now the serial support is enabled
- by default.
-
-2000-09-27 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/char_io.c [!STAGE1_5] (get_cmdline) [!SUPPORT_SERIAL]:
- Don't check if the terminal is dumb. If the terminal is console,
- always use console functions.
- * stage2/builtins.c [!SUPPORT_NETBOOT] (bootp_func): Undefined.
- [!SUPPORT_NETBOOT] (builtin_bootp): Likewise.
- [!GRUB_UTIL] (device_func): Likewise.
- [!GRUB_UTIL] (builtin_device): Likewise.
- [!SUPPORT_NETBOOT] (dhcp_func): Likewise.
- [!SUPPORT_NETBOOT] (builtin_dhcp): Likewise.
- [!GRUB_UTIL] (quit_func): Likewise.
- [!GRUB_UTIL] (builtin_quit): Likewise.
- [!SUPPORT_NETBOOT] (rarp_func): Likewise.
- [!SUPPORT_NETBOOT] (builtin_rarp): Likewise.
- [!SUPPORT_SERIAL] (serial_func): Likewise.
- [!SUPPORT_SERIAL] (builtin_serial): Likewise.
- [!SUPPORT_SERIAL] (terminal_func): Likewise.
- [!SUPPORT_SERIAL] (builtin_terminal): Likewise.
- [!SUPPORT_NETBOOT] (tftpserver_func): Likewise.
- [!SUPPORT_NETBOOT] (builtin_tftpserver): Likewise.
- (builtin_table) [!SUPPORT_NETBOOT]: Removed the pointers to
- BUILTIN_BOOTP, BUILTIN_DHCP, BUILTIN_RARP, and
- BUILTIN_TFTPSERVER.
- (builtin_table) [!SUPPORT_SERIAL]: Removed the pointers to
- BUILTIN_SERIAL and BUILTIN_TERMINAL.
- (builtin_table) [!GRUB_UTIL]: Removed the pointers to
- BUILTIN_DEVICE and BUILTIN_QUIT.
-
-2000-09-26 OKUJI Yoshinori <okuji@gnu.org>
-
- * util/grub-install.in (bootdir_device): New variable. If
- $bootdir_device is not the same as $root_device, set root_device
- and grubdir to $bootdir_device and "/grub", respectively.
- Add --prefix=$grubdir into the command "setup".
-
-2000-09-26 OKUJI Yoshinori <okuji@gnu.org>
-
- Add --prefix=DIR to the command "setup".
-
- * stage2/builtins.c (setup_func): New nested function,
- check_file checks if the file FILE exists.
- Remove the prefix "/boot/grub" in STAGE1_5_MAP.
- Don't hardcode "/boot/grub/stage1", "/boot/grub/stage2", or
- "/boot/grub/menu.lst". Instead, check if ARG contains
- "--prefix=", and if specified, set PREFIX to the value.
- If not specified, check "/boot/grub/stage1" and, if not found,
- check "/grub/stage1". If a stage1 was found, set PREFIX to the
- directory which contains the stage1.
-
-2000-09-12 OKUJI Yoshinori <okuji@gnu.org>
-
- Add additional magic to avoid a bug in Linux. *sigh*
-
- * stage2/boot.c (load_image): Copy SRC to DEST first, and append
- a "mem=" option to DEST instead of prepending.
-
-2000-09-11 OKUJI Yoshinori <okuji@gnu.org>
-
- Reported by Alessandro Rubini:
- * stage2/fsys_minix.c (minix_mount): Check if CURRENT_SLICE is a
- partition type for minix fs, using the macro
- IS_PC_SLICE_TYPE_MINIX.
- * stage2/pc_slice.h (PC_SLICE_TYPE_LINUX_MINIX): New macro.
- (IS_PC_SLICE_TYPE_MINIX): Likewise.
-
-2000-09-09 Alessandro Rubini <rubini@morgana.systemy.it>
-
- * stage1/stage1.S (notification_string): Print "GRUB " instead
- of "stage1 ".
- * stage2/start.S [STAGE1_5] (notification_string): Print
- "Loading stage1.5" instead of "stage1.5 ".
- [!STAGE1_5] (notification_string): Print "Loading stage2"
- instead of "stage2 ".
- (notification_step): New label, followed by a string ".".
- (notification_done): New label, followed by a string "\r\n".
- (copy_buffer): Print NOTIFICATION_STEP after copying the buffer.
- (bootit): Print NOTIFICATION_DONE before restoring %dx.
-
-2000-09-09 OKUJI Yoshinori <okuji@gnu.org>
-
- From Alessandro Rubini:
- * configure.in (CPPFLAGS): Added -malign-jumps=1,
- -malign-loops=1 and -malign-functions=1.
-
-2000-09-07 OKUJI Yoshinori <okuji@gnu.org>
-
- From Hal Snyder <hal@vailsys.com>:
- * lib/device.c (get_drive_geometry) [__FreeBSD__ || __NetBSD__
- || __OpenBSD__]: Call ioctl for FD instead of
- DISKS[DRIVE].FLAGS. This was a mistake when I segregated this
- function from asmstub.c.
-
-2000-09-07 Alessandro Rubini <rubini@gnu.org>
-
- * docs/tutorial.texi: Fixed a few typos and minor imprecisions.
- * docs/prog-ref.texi: Likewise.
- * docs/user-ref.texi: Likewise.
-
-2000-09-07 OKUJI Yoshinori <okuji@gnu.org>
-
- From Alessandro Rubini:
- * stage2/builtins.c (terminal_func): Rename TIMEOUT to TO, to
- suppress GCC warnings.
- * grub/asmstub.c (serial_checkkey): Likewise.
-
-2000-09-06 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/char_io.c [!STAGE1_5] (auto_fill): New variable.
- [!STAGE1_5] (get_cmdline): Save AUTO_FILL in SAVED_AUTO_FILL in
- the beginning and restore AUTO_FILL before return.
- Set AUTO_FILL to one and zero before and after calling
- print_completions, respectively.
- (grub_putchar) [!STAGE1_5]: Use a static variable COL to track
- the position of the cursor. If C is a carriage return, clear
- COL. If C is a backspace and COL is positive, decrease COL. If C
- is a printable character, increase COL. In this case, if
- AUTO_FILL is non-zero and COL is greater than or equal to 79,
- put a newline automatically.
- * stage2/shared.h (auto_fill): Declared.
- * stage2/stage2.c (run_menu): In the menu interface, disable the
- auto fill mode (i.e. set AUTO_FILL to zero), and enable it again
- when booting an entry.
- (cmain): Initialize AUTO_FILL (i.e. set it to one) in the
- beginning of the loop.
-
-2000-09-06 OKUJI Yoshinori <okuji@gnu.org>
-
- Add support for "boot previously booted entry by default", based
- on the patch by Mike Meyer <mwm@mired.org>, but I've modified
- his patch thoroughly.
-
- * grub/asmstub.c (saved_entryno): New variable. This is a dummy.
- * stage1/stage1.h (COMPAT_VERSION_MINOR): Incremented.
- * stage2/asm.S (saved_entryno): New variable.
- (codestart) [!SUPPORT_DISKLESS]: Set INSTALL_SECOND_SECTOR to
- %ebp. %ebp is set in start.S.
- (install_second_sector): New variable.
- * stage2/builtins.c (current_entryno): New variable.
- (default_func) [!SUPPORT_DISKLESS]: If ARG is "saved", set
- DEFAULT_ENTRY to SAVED_ENTRYNO.
- (savedefault_func): New function.
- (builtin_savedefault): New variable.
- (builtin_table): Added a pointer to BUILTIN_SAVEDEFAULT.
- * stage2/shared.h (STAGE2_SAVED_ENTRYNO): New macro.
- (STAGE2_STAGE2_ID): Changed to 0x10.
- (STAGE2_FORCE_LBA): Chaged to 0x11.
- (STAGE2_VER_STR_OFFS): Changed to 0x12.
- (install_second_sector): Declared.
- (saved_entryno): Likewise.
- (current_entryno): Likewise.
- * stage2/stage2.c (run_menu): Set CURRENT_ENTRYNO to FIRST_ENTRY
- + ENTRYNO, right before calling run_script.
- * stage2/start.S (start): Save the sector number of the second
- sector in %ebp.
-
-2000-09-05 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage1/stage1.S (lba_mode) [!NO_BUGGY_BIOS_IN_THE_WORLD]:
- Don't check for the geometry, since some BIOSes don't return the
- number of total sectors correctly, even if they have working LBA
- support.
- * stage2/start.S (lba_mode) [!NO_BUGGY_BIOS_IN_THE_WORLD]:
- Likewise.
- * stage2/bios.c (biosdisk) [!NO_BUGGY_BIOS_IN_THE_WORLD]:
- Likewise.
- Reported by Jan Fricke <fricke@uni-greifswald.de> and Pixel
- <pixel@mandrakesoft.com>.
-
-2000-09-05 OKUJI Yoshinori <okuji@gnu.org>
-
- From Alessandro Rubini <rubini@gnu.org>:
- * stage2/char_io.c (print_error) [!STAGE1_5]: Print ERRNUM like
- "Error 9: Unknown boot failure".
- (print_error) [STAGE1_5]: Don't print a colon.
- * util/grub-install.in: When checking if an error occurred, use
- the expression "Error [0-9]*: " instead of "Error: ".
- * docs/user-ref.texi (Stage1.5 errors): Updated, since the error
- form changed.
-
-2000-09-04 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/stage2.c (run_menu) [GRUB_UTIL]: Set DISP_UP and
- DISP_DOWN to ACS_UARROW and ACS_DARROW, respectively. Don't call
- grub_printf here.
- (run_menu) [!GRUB_UTIL]: Don't call grub_printf here. Instead,
- call it...
- (run_menu): ... here.
- * stage2/shared.h (ACS_ULCORNER): Always define this ourselves,
- whether your curses library has the definition.
- (ACS_URCORNER): Likewise.
- (ACS_LLCORNER): Likewise.
- (ACS_LRCORNER): Likewise.
- (ACS_HLINE): Likewise.
- (ACS_VLINE): Likewise.
- (ACS_LARROW): Likewise.
- (ACS_RARROW): Likewise.
- (ACS_UARROW): Likewise.
- (ACS_DARROW): Likewise.
-
- * stage2/char_io.c [SUPPORT_SERIAL] (serial_cls): If the
- terminal is dumb, just put a newline.
- * stage2/builtins.c (terminal_func) [SUPPORT_SERIAL]: When
- choosing a terminal, don't set TERMINAL to the type of the
- terminal. Instead, apply a logical AND operation with
- TERMINAL_DUMB, since previous code brushed off the dumb
- attribute.
-
-2000-09-04 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/stage2.c (run_menu): If SHOW_MENU is zero, print a
- message with the timeout per second.
- If GRUB_TIMEOUT is negative, set SHOW_MENU to one, since the
- condition "no timeout and no interface" is nonsense.
- If GRUB_TIMEOUT is equal to or greater than zero and the
- terminal is dumb, set SHOW_MENU to zero.
- If SHOW_MENU is non-zero and the terminal is dumb, enter the
- command-line interface instead. If AUTH is false and PASSWORD is
- non-NULL, prompt the user to enter a password until the entered
- password is identical to PASSWORD.
-
-2000-09-03 OKUJI Yoshinori <okuji@gnu.org>
-
- * util/grub-install.in: Fix a typo: grub_dir -> grubdir.
- * stage2/builtins.c (install_func) [GRUB_UTIL]: Open a Stage 2
- with "r+" instead of "r", as GRUB needs to overwrite it.
-
-2000-09-02 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/stage2.c (run_menu): Don't use either `p' or `n' to
- move the cursor, because `p' is already used for another
- purpose (password).
- (run_menu) [SUPPORT_SERIAL]: Don't set the variables DISP_UP and
- DISP_DOWN at the start time. Instead, set them just before using
- them actually, because TERMINAL may change when running a menu.
-
-2000-09-01 Klaus Reichl <Klaus.Reichl@alcatel.at>
-
- * stage2/stage2.c (run_menu): Setup and use disp_up, disp_down
- depending on the terminal mode.
- (run_menu): Allow '^' (resp. 'p') and 'v' (resp 'n') keys we
- described in our help above (resp. authors preferences).
-
-2000-08-31 Klaus Reichl <Klaus.Reichl@alcatel.at>
-
- * stage2/stage2.c (set_line): Go back one char, which is
- consistent with the original situation, when a timeout was
- running.
- (run_menu): If GRUB_TIMEOUT is stopped don't loop busy over
- CHECKKEY, just relax in GETKEY.
-
- * stage2/builtins.c (serial_func): --speed handling: corrected
- typo: set SPEED instead of PORT.
-
-2000-08-31 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (terminal_func): Added two new options,
- --dumb and --timeout=SECS.
- * stage2/char_io.c [!STAGE1_5] (getkey): Use logical AND
- operations, when checking if the terminal is a console or a
- serial terminal.
- [!STAGE1_5] (getkey) [SUPPORT_SERIAL]: Don't check if both
- TERMINAL_CONSOLE and TERMINAL_SERIAL are set in TERMINAL.
-
-2000-08-31 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage1/stage1.S (MOV_MEM_TO_AL): New macro.
- (real_start): Use the macro MOV_MEM_TO_AL instead of using movb
- directly, because binutils-2.9.1.0.x doesn't produce a short
- opcode for it automatically. Reported by Alessandro Rubini
- <rubini@gnu.org>.
-
-2000-08-30 OKUJI Yoshinori <okuji@gnu.org>
-
- * configure.in (CPPFLAGS): Remove -Wundef by default. Add the
- option only if the C compiler supports it, because GCC 2.7.x
- doesn't support it.
- * grub/main.c (longopts): The type of the argument for "hold" is
- changed to OPTIONAL_ARGUMENT.
- (main): If --hold is specified, check if OPTARG is zero. If so,
- set HOLD to -1, otherwise, set it to the digit OPTARG.
- If HOLD is greater than zero, decrease it once per loop.
-
-2000-08-30 OKUJI Yoshinori <okuji@gnu.org>
-
- The command-line interface is switched to single-line editing
- mode.
-
- * stage2/char_io.c [!STAGE1_5] (get_cmdline): Extensively
- rewritten. The nested functions cl_print and cl_kill_to_end are
- removed, cl_refresh, cl_backward, cl_forward and cl_delete are
- added, and, cl_init and cl_insert are rewritten from scratch.
- See the source code, for more information. I don't think this
- kind of changes can be represented in ChangeLog.
- [!STAGE1_5] (CMDLINE_WIDTH): New macro.
- [!STAGE1_5] (CMDLINE_MARGIN): Likewise.
- * stage2/shared.h (TERMINAL_DUMB): Likewise.
-
-2000-08-28 OKUJI Yoshinori <okuji@gnu.org>
-
- * grub/asmstub.c (console_putchar) [HAVE_LIBCURSES]: If
- USE_CURSES is true, emulate a new line like a ordinary terminal,
- because ncurses treats it badly. If current position on y-axis
- is the bottom of the screen, call scroll. Otherwise, call move
- with the arguments, Y + 1 and X, where X and Y are current
- position of the cursor.
-
-2000-08-28 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/asm.S (console_putchar): Don't print a carriage return
- when C is a newline.
- * stage2/char_io.c (grub_putchar): Call grub_putchar with the
- arugment set to a carriage return, if C is a newline.
- [!STAGE1_5 && SUPPORT_SERIAL]: Don't print a carriage return
- when C is a newline.
-
-2000-08-27 OKUJI Yoshinori <okuji@gnu.org>
-
- * lib/device.c [__linux__]: Don't include linux/fs.h.
- [!BLKGETSIZE] (BLKGETSIZE): Defined as _IO(0x12,96).
- * grub/asmstub.c [__linux__]: Don't include linux/fs.h.
-
-2000-08-27 OKUJI Yoshinori <okuji@gnu.org>
-
- Preserve a magic number used by Windows NT in a MBR. Shit!
- Reported by Khimenko Victor.
-
- * stage1/stage1.h (STAGE1_WINDOWS_NT_MAGIC): New macro.
- * stage1/stage1.S (copy_buffer): Use pusha and popa, instead of
- pushing/poping %cx and %si separately, to reduce the code size.
- (nt_magic): New label. Set the offset to _start plus
- STAGE1_WINDOWS_NT_MAGIC
- (part_start): New label.
- * stage2/builtins.c (install_func): If DEST_DRIVE is a hard
- disk, copy the possible partition table and Windows NT magic to
- STAGE1_BUFFER from OLD_SECT.
-
-2000-08-26 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/char_io.c (translate_keycode) [SUPPORT_SERIAL]: Don't
- drain the input buffer, since that was irritating.
-
-2000-08-26 OKUJI Yoshinori <okuji@gnu.org>
-
- Don't save/restore fragile registers unnecessarily.
-
- * stage2/asm.S [!STAGE1_5] (track_int13): Don't save/restore
- %ecx, %edx, or %eax.
- [!STAGE1_5] (set_int13_handler): Likewise.
- (biosdisk_int13_extensions): Likewise.
- (biosdisk_standard): Likewise.
- (check_int13_extensions): Likewise.
- (get_diskinfo_int13_extensions): Likewise.
- (get_diskinfo_standard): Likewise.
- (get_diskinfo_floppy): Likewise.
- [!STAGE1_5] (get_eisamemsize): Likewise.
- [!STAGE1_5] (get_mmap_entry): Likewise.
- [!STAGE1_5] (console_cls): Likewise.
- [!STAGE1_5] (nocursor): Likewise.
- [!STAGE1_5] (console_getxy): Likewise.
- [!STAGE1_5] (console_gotoxy): Likewise.
- [!STAGE1_5] (set_attrib): Likewise.
- [!STAGE1_5] (getrtsecs): Likewise.
- [!STAGE1_5] (currticks): Likewise, and don't zero %eax
- explicitly, since prot_to_real does that.
-
-2000-08-25 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/char_io.c [!STAGE1_5] (translate_keycode): New
- function. The serial part is stolen from the patch by Christoph
- Plattner.
- [!STAGE1_5] (get_cmdline): Call translate_keycode instead of
- translating special key codes into ASCII characters by itself.
- * stage2/stage2.c (run_menu): Wrap getkey with the macro
- ASCII_CHAR, when checking if ESC is pressed.
- Call translate_keycode as well as getkey, unless checkkey
- returns -1. So don't check if C is KEY_DOWN or KEY_UP. And don't
- use the macro ASCII_CHAR for C explicitly.
- * stage2/shared.h (translate_keycode): Declared.
-
-2000-08-24 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c [GRUB_UTIL]: Include stdio.h before
- shared.h. Reported by Mathieu Chouquet-Stringer
- <mchouque@cs.stevens-tech.edu>.
-
-2000-08-21 OKUJI Yoshinori <okuji@gnu.org>
-
- * configure.in (--enable-serial-speed-emulation): New option.
- (SERIAL_SPEED_SIMULATION): New conditional.
- * grub/Makefile.am (SERIAL_FLAGS): New variable. Set
- -DSUPPORT_SERIAL=1 and -DSIMULATE_SLOWNESS_OF_SERIAL=1, if
- SERIAL_SPEED_SIMULATION is defined, otherwise, set it to
- only -DSUPPORT_SERIAL=1.
- (AM_CFLAGS): Removed -DSUPPORT_SERIAL=1 and added
- $(SERIAL_FLAGS).
- * grub/asmstub.c [SIMULATE_SLOWNESS_OF_SERIAL] (serial_speed):
- New variable.
- (grub_setjmp): Removed.
- (grub_longjmp): Likewise.
- (serial_getkey) [SIMULATE_SLOWNESS_OF_SERIAL]: Wait for
- 1000000 / (SERIAL_SPEED >> 3) microseconds using gettimeofday.
- (serial_putchar) [SIMULATE_SLOWNESS_OF_SERIAL]: Likewise.
- (serial_init) [SIMULATE_SLOWNESS_OF_SERIAL]: Set SERIAL_SPEED to
- SPEED.
- * stage2/builtins.c (serial_func) [SUPPORT_SERIAL]: Added
- a new option, `--speed'.
- (builtin_serial): Added a description about --speed.
- (terminal_func): When get a key from a serial device, if GRUB is
- in the command-line interface, call grub_longjmp with
- RESTART_CMDLINE_ENV, instead of init_page.
- * stage2/cmdline.c (restart_cmdline_env): New variable.
- (enter_cmdline): Call grub_setjmp with RESTART_CMDLINE_ENV after
- calling init_cmdline.
- (run_script): Run BUILTIN->FUNC with BUILTIN_SCRIPT instead of
- BUILTIN_CMDLINE.
- * stage2/shared.h (BUILTIN_SCRIPT): New macro.
- [GRUB_UTIL] (grub_setjmp): Defined as setjmp.
- [GRUB_UTIL] (grub_longjmp): Defined as longjmp.
- (restart_cmdline_env): Declared.
-
-2000-08-20 OKUJI Yoshinori <okuji@gnu.org>
-
- * configure.in (--enable-serial): New option. Serial terminal
- support will be enabled by default, once it is stabilized.
- (SERIAL_SUPPORT): New conditional.
- * grub/Makefile.am (AM_CFLAGS): Added -DSUPPORT_SERIAL=1.
- * grub/asmstub.c (cls): Renamed to ...
- (console_cls): ... this.
- (getxy): Renamed to ...
- (console_getxy): ... this.
- (gotoxy): Renamed to ...
- (console_gotoxy): ... this.
- * stage2/Makefile.am (libgrub_a_CFLAGS): Added
- -DSUPPORT_SERIAL=1.
- (NETBOOT_FLAGS): New variable.
- (SERIAL_FLAGS): Likewise.
- (STAGE2_COMPILE): Added $(NETBOOT_FLAGS) and $(SERIAL_FLAGS).
- * stage2/asm.S [!STAGE1_5] (cls): Renamed to ...
- [!STAGE1_5] (console_cls): ... this.
- [!STAGE1_5] (getxy): Renamed to ...
- [!STAGE1_5] (console_getxy): ... this.
- [!STAGE1_5] (gotoxy): Renamed to ...
- [!STAGE1_5] (console_gotoxy): ... this.
- * stage2/builtins.c (terminal_func): If the bit flag
- BUILTIN_CMDLINE in FLAGS is set, call init_page. But this should
- be fixed so that it restarts enter_cmdline instead.
- * stage2/char_io.c [!STAGE1_5] (gotoxy): New function.
- [!STAGE1_5] (serial_gotoxy): Likewise.
- [!STAGE1_5] (getxy): Likewise.
- [!STAGE1_5] (serial_getxy): Likewise.
- [!STAGE1_5] (cls): Likewise.
- [!STAGE1_5] (serial_cls): Likewise.
- * stage2/serial.h (serial_cls): Declared.
- (serial_getxy): Likewise.
- (serial_gotoxy): Likewise.
- * stage2/shared.h (console_cls): Likewise.
- (console_getxy): Likewise.
- (console_gotoxy): Likewise.
- * stage2/stage2.c (print_entries): If serial terminal is
- enabled, print ACS_UARROW and ACS_DARROW instead of DISP_UP and
- DISP_DOWN, respectively.
- (print_border): If serial terminal is enabled, print
- ACS_ULCORNER, ACS_URCORNER, ACS_LLCORNER, ACS_LRCORNER,
- ACS_HLINE and ACS_VLINE instead of DISP_UL, DISP_UR, DISP_LL,
- DISP_LR, DISP_HORIZ and DISP_VERT, respectively.
- (print_border) [SUPPORT_SERIAL]: Color the menu only if console
- is used.
- (set_line): Take two more arguments, ENTRYNO and MENU_ENTRIES.
- (set_line_normal): Likewise.
- (set_line_highlight): Likewise.
- (set_line) [SUPPORT_SERIAL]: If serial terminal is enabled, get
- the menu entry whose attributes are being changed and redraw the
- line.
- (set_line_highlight) [SUPPORT_SERIAL]: If serial terminal is
- enabled, print `ESC [ 7 m' and `ESC [ 0 m' before and after
- calling set_line, respectively.
- (run_menu) [SUPPORT_SERIAL]: Call nocursor only if console is
- used.
-
-2000-08-20 OKUJI Yoshinori <okuji@gnu.org>
-
- Now the serial console support is partially working.
-
- * grub/asmstub.c (serial_checkkey): Specify a pointer to TIMEOUT
- as the fifth argument to select.
- (serial_get_port): New function. Just a dummy.
- (serial_init): If a serial device is opened, close SERIAL_FD
- before opeing a new serial device.
- Don't specify O_NDELAY to open.
- * stage2/builtins.c [SUPPORT_SERIAL]: Include serial.h.
- (serial_func): New function.
- (builtin_serial): New variable.
- (terminal_func): New function.
- (builtin_terminal): New variable.
- (builtin_table): Add pointers to BUILTIN_SERIAL and
- BUILTIN_TERMINAL.
- * stage2/char_io.c [SUPPORT_SERIAL]: Include serial.h.
- (getkey) [SUPPORT_SERIAL]: If both TERMINAL_CONSOLE and
- TERMINAL_SERIAL are set in TERMINAL simultaneously, print a
- warning and force the console terminal.
- (checkkey) [SUPPORT_SERIAL]: If TERMINAL_SERIAL is set in
- TERMINAL, call serial_checkkey.
- (grub_putchar) [SUPPORT_SERIAL]: If TERMINAL_SERIAL is set in
- TERMINAL, call serial_putchar. If C is a newline, print a
- carriage return, before printing a newline.
-
-2000-08-15 OKUJI Yoshinori <okuji@gnu.org>
-
- The image `nbgrub' now relocates itself from 0x10000 to 0x8000,
- since the Network Boot Image Proposal doesn't permit a second
- loader to be loaded below 0x10000. Reported by Matthias
- Kretschmer <McCratch@gmx.net>.
-
- * Makefile.am (NBLOADER_LINK): New variable.
- (nbloader_exec_LDFLAGS): Set to $(NBLOADER_LINK) instead of
- $(START_LINK).
- * stage2/nbi.h (NBI_DEST_ADDR): Changed to 0x10000.
- (NBI_DEST_SEG): New macro.
- (NBI_DEST_OFF): Likewise.
- (RELOCATED_ADDR): Likewise.
- (RELOCATED_SEG): Likewise.
- (RELOCATED_OFF): Likewise.
- (STAGE2_START_ADDR): Likewise.
- * stage2/nbloader.S: Added .code16 directive at the start of the
- code.
- Set the segment and the offset of the load address to
- NBI_DEST_SEG and NBI_DEST_OFF, respectively.
- Set the segment and the offset of the start address to
- NBI_DEST_SEG and NBI_DEST_OFF + relocate - _start, respectively.
- Added a routine for relocating itself.
- (relocate): New label.
- (copy_rest): Likewise.
- (copy_loop): Likewise.
- (copy): Likewise.
- (boot_stage2): Likewise.
-
-2000-08-13 OKUJI Yoshinori <okuji@gnu.org>
-
- * grub/main.c (main): Move the version number inside the
- parentheses, since the grub shell is merely one of the programs
- included in GNU GRUB.
-
-2000-08-13 OKUJI Yoshinori <okuji@gnu.org>
-
- Add a serial device emulation into the grub shell.
-
- * grub/asmstub.c: Include sys/time.h and termios.h.
- (serial_fd): New variable.
- (serial_device): Likewise.
- (serial_getkey): New function.
- (serial_checkkey): Likewise.
- (serial_putchar): Likewise.
- (get_termios_speed): Likewise.
- (serial_init): Likewise.
- (set_serial_device): Likewise.
- (grub_stage2): Restore SERIAL_DEVICE and SERIAL_FD, if they were
- allocated.
- * stage2/serial.h [GRUB_UTIL] (set_serial_device): Declared.
-
-2000-08-13 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/asm.S (codestart) [SUPPORT_DISKLESS]: Don't reset a
- disk system. That is not only uncessary but also harmful.
-
-2000-08-12 OKUJI Yoshinori <okuji@gnu.org>
-
- Add a serial device driver (but only the driver).
-
- * stage2/serial.c: New file.
- * stage2/serial.h: Likewise.
- * stage2/shared.h (serial_getkey): Moved to stage2/serial.h.
- (serial_checkkey): Likewise.
- (serial_putchar): Likewise.
- * stage2/Makefile.am (noinst_HEADERS): Added serial.h.
- (pre_stage2_exec_SOURCES): Added serial.c.
-
-2000-08-10 Pavel Roskin <proski@gnu.org>
-
- * docs/tutorial.texi: Minor fixes.
-
-2000-08-10 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/tutorial.texi (Installation): Divided into three sections
- instead of two sections. Don't describe the usage of the the
- grub shell any longer. Instead, how to use grub-install is
- documented.
-
-2000-08-09 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c [GRUB_UTIL]: Include stdio.h.
- (embed_func) [GRUB_UTIL && __linux__]: When embedding a Stage
- 1.5 into a partition, call write_to_partition instead of
- biosdisk.
- (install_func): Set DEST_PARTITION to the partition where Stage
- 1 resides.
- Set SRC_PART_START to the starting address of the partition
- where Stage 2 resides.
- (install_func) [GRUB_UTIL]: Set STAGE2_OS_FILE to the file name
- of Stage 2 under an OS, if the new option "--stage2" is
- specified. Otherwise, set it to null.
- If STAGE2_OS_FILE is not null, modify the Stage 2 via the
- filesystem serviced by the OS.
- (install_func) [GRUB_UTIL && __linux__]: If STAGE2_OS_FILE is
- null but the Stage2 resides in a partition, use
- write_to_partition.
- If DEST_PARTITION is not 0xFFFFFF, use write_to_partition, to
- embed Stage 1.
- (setup_func) [GRUB_UTIL]: If --stage2 is specified, set
- STAGE2_ARG to the string pointing to the option. Otherwise, set
- it to null.
- (setup_func) [!GRUB_UTIL]: Set STAGE2_ARG to null.
- (setup_func): If STAGE2_ARG is not null, add STAGE2_ARG and a
- space character into CMD_ARG.
- * lib/device.c (_LARGEFILE_SOURCE): Defined.
- (_FILE_OFFSET_BITS): Likewise.
- [__linux__] (write_to_partition): New function.
- * lib/device.h [__linux__] (write_to_partition): Declared.
- * util/grub-install.in: Specify the option "--stage2" for the
- command "setup".
-
-2000-08-04 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/fsys_fat.c (fat_superblock): clust_eof_marker added.
- (fat_mount): Initialize clust_eof_marker to 0xff8, 0xfff8, or
- 0xffffff8, depending on fat size. Support for single active FAT
- added (FAT32 extension). Changed the boundary between FAT12 and
- FAT16, again. The Microsoft KB article Q65541 seems to be wrong
- here, I go with mtools and the previous behaviour of grub: FAT12
- iff number of clusters (without counting the two nonexisting
- clusters) is less or equal 4095.
- (fat_read): Report error if cluster number is too big, but not
- greater or equal clust_eof_marker.
- * stage2/fsys_reiserfs.c (journal_init): Fixed calculation of
- journal_transaction.
-
-2000-08-01 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/fsys_reiserfs.c: Symlink support added.
- (S_ISLNK): New macro.
- (PATH_MAX): Likewise.
- (MAX_LINK_COUNT): Likewise.
- (reiserfs_dir): Check for symlink and handle them.
- (read_tree_node): Take a block number and check if tree node was
- already read in. If not update the INFO->blocks field.
- (next_key): Changed call of read_tree_node.
- (search_stat): Likewise.
- (journal_init): Fixed a small bug. Some debugging messages added.
-
-2000-07-31 Pavel Roskin <proski@gnu.org>
-
- * grub/asmstub.c (biosdisk) [__linux__]: The first argument for
- _llseek renamed from "seeked_fd" to "filedes".
-
-2000-07-30 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/appendices.texi (FAQ): Added the answer for the separate
- boot partition problem.
-
-2000-07-30 OKUJI Yoshinori <okuji@gnu.org>
-
- Update the network support to Etherboot-4.6.4.
-
- From Daniel Wagner <wagi@gmx.ch>:
- * netboot/3c509.c: Copied from Etherboot-4.6.4.
- * netboot/3c509.h: Likewise.
- * netboot/cards.h: Likewise.
- * netboot/ns8390.c: Likewise.
- * netboot/sk_g16.c: Likewise.
- * netboot/sk_g16.h: Likewise.
- * netboot/tulip.c: Likewise.
- * netboot/pci.h: Likewise.
- * netboot/main.c (dhcpdiscover): Updated.
- (dhcprequest): Likewise.
- (bootp): Likewise.
- * netboot/README.netboot: Added the information about the new
- option --enable-ns8390-force-16bit.
- * configure.in (--enable-ns8390-force-16bit): New option.
-
- * netboot/config.c: Updated.
-
-2000-07-29 OKUJI Yoshinori <okuji@gnu.org>
-
- The Linux zImage support is working now.
-
- * stage2/asm.S (linux_boot): Add 3 into %ecx and shift %ecx to
- the right by 2 bits, instead of shift %ecx to the left by 2
- bits.
-
-2000-07-29 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/fsys_reiserfs.c (block_read): Changed the variable "len"
- to "j_len" (it shadowed a parameter).
-
-2000-07-29 OKUJI Yoshinori <okuji@gnu.org>
-
- * configure.in (CPPFLAGS): Added -Wshadow, -Wpointer-arith and
- -Wundef, as GCC sometimes more clever than me. :)
- * stage2/shared.h [!ASM_FILE] (multi_boot): Change the name of
- the second argument from "mbi" to "mb_info".
- [!ASM_FILE] (biosdisk): Rename the first argument "read" to
- "subfunc".
- * lib/device.h (init_device_map): Change the name of the third
- argument from "floppy_disks" to "no_floppies".
- * lib/device.c (read_device_map): Rename the internal function
- "print_error" to "show_error".
- * stage2/builtins.c (install_func): Rename CONFIG_FILE to
- REAL_CONFIG.
- (setup_func): Rename INSTALL_DRIVE, INSTALL_PARTITION and
- CONFIG_FILE to INSTALLED_DRIVE, INSTALLED_PARTITION and
- CONFIG_FILENAME, respectively.
- * stage2/char_io.c (convert_to_ascii): Rename the internal
- variable C to TMP.
- (get_cmdline): Rename KILL to KILL_BUF.
- Rename the second argument for cl_print to REAL_ECHO_CHAR from
- ECHO_CHAR.
- * stage2/stage2.c (run_menu): Rename the internal variable
- NUM_ENTRIES to NEW_NUM_ENTRIES.
- (cmain): Rename KILL to KILL_BUF.
- * stage2/disk_inode_ffs.h: Check if BYTE_MSF is defined before
- checking the value.
- * stage2/fsys_ext2fs.c (ext2fs_dir): Check if E2DEBUG is
- defined, instead of if the value is non-zero.
- * grub/asmstub.c: Check if __GLIBC__ is defined before checking
- the value.
- (biosdisk) [__linux__]: Likewise.
- Rename the first argument for _llseek to "seeked_fd" from "fd".
- (multi_boot): Rename the second argument to "mb_info" from
- "mbi".
-
-2000-07-27 Gordon Matzigkeit <gord@fig.org>
-
- * util/grub-image.in: Initial cut at a script for creating GRUB
- boot images.
- * util/Makefile.am (noinst_SCRIPTS): Added grub-image.
- * configure.in (AC_OUTPUT): Added util/grub-image.
-
-2000-07-27 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/asm.S (check_int13_extensions): Fixed the effect of
- the --force-lba switch in stage2/stage1_5.
-
-2000-07-25 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/fsys_fat.c (fat_mount): Fixed calculation of num_clust.
- It was off by two, since the two non existing clusters 0 and 1
- were not taken into account. Also fixed the boundary between
- FAT12 and FAT16.
-
-2000-07-25 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/asm.S [!STAGE1_5] (linux_text_len): New variable.
- [!STAGE1_5] (linux_boot): Don't set %eax to LINUX_SETUP
- meaninglessly.
- Set %ecx to LINUX_TEXT_LEN instead of LINUX_KERNEL_MAXLEN.
- [!STAGE1_5] (big_linux_boot): Disable interrupts before changing
- the stack pointer.
- Change %ss right before %sp.
- Reverse the arguments for ljmp. A segment must be after an
- offset. *sigh*
- * stage2/boot.c (load_image): Set LINUX_TEXT_LEN to TEXT_LEN,
- if a Linux kernel is loaded successfully.
- * stage2/shared.h (LINUX_VID_MODE_OFFSET): Removed.
- [!ASM_FILE] (linux_kernel_header): Change the type of the member
- `heap_end_ptr' to unsigned short.
- [!ASM_FILE] (linux_text_len): Declared.
-
-2000-07-24 OKUJI Yoshinori <okuji@gnu.org>
-
- Comply with the Linux/i386 boot protocol version 2.02.
-
- * stage2/asm.S [!STAGE1_5] (linux_boot): Set the length of moved
- bytes to LINUX_KERNEL_MAXLEN instead of
- LINUX_KERNEL_LEN_OFFSET(%eax), since the field is obsolete.
- [!STAGE1_5] (big_linux_boot): Don't use SEGMENT or OFFSET.
- Instead, embed the segment and the offset in the code itself.
- Set %ds, %es, %fs and %gs to %ax (LINUX_INIT_SEG).
- * stage2/boot.c (load_image): Rewrite the Linux support code
- heavily. Use a structure instead of a batch of macros, to access
- a Linux kernel header.
- (load_initrd): If MOVETO plus LEN is greater than or equal to
- LINUX_INITRD_MAX_ADDRESS, set MOVETO to LINUX_INITRD_MAX_ADDRESS
- minus LEN with page aligned.
- * stage2/shared.h (LINUX_MAGIC_SIGNATURE): New macro.
- (LINUX_DEFAULT_SETUP_SECTS): Likewise.
- (LINUX_FLAG_CAN_USE_HEAP): Likewise.
- (LINUX_INITRD_MAX_ADDRESS): Likewise.
- (LINUX_MAX_SETUP_SECTS): Likewise.
- (LINUX_BOOT_LOADER_TYPE): Likewise.
- (LINUX_HEAP_END_OFFSET): Likewise.
- (LINUX_SETUP_MAXLEN): Removed.
- (LINUX_KERNEL_LEN_OFFSET): Likewise.
- (LINUX_SETUP_LEN_OFFSET): Likewise.
- (LINUX_SETUP_STACK): Set to 0x7F00 instead of 0x3FF4 (why was it
- this value?).
- (LINUX_SETUP_LOADER): Removed.
- (LINUX_SETUP_LOAD_FLAGS): Likewise.
- (LINUX_SETUP_CODE_START): Likewise.
- (LINUX_SETUP_INITRD): Likewise.
- (CL_MY_LOCATION): Set to RAW_ADDR(0x97F00) instead of
- RAW_ADDR(0x92000).
- (CL_MY_END_ADDR): Set to RAW_addr(0x97FFF) instead of
- RAW_ADDR(0x920FF).
- (CL_MAGIC_ADDR): Removed.
- (CL_OFFSET): Likewise.
- [!ASM_FILE] (struct linux_kernel_header): New structure tag.
-
-2000-07-23 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/tutorial.texi: Fix some syntax errors and ambiguous
- sentences. Suggested by M. Meiarashi <mes@st.rim.or.jp>.
-
-2000-07-14 Khimenko Victor <grub@khim.sch57.msk.ru>
-
- * stage2/boot.c (load_image): When getting the text length of a
- Linux kernel, use unsigned long instead of unsigned short.
-
-2000-07-13 OKUJI Yoshinori <okuji@gnu.org>
-
- * lib/device.c: Include errno.h. Reported by Thierry DELHAISE
- <thierry.delhaise@delhaise.com>.
-
-2000-07-12 OKUJI Yoshinori <okuji@gnu.org>
-
- Just to start implementing serial console support...
-
- * stage2/asm.S (grub_putchar): Renamed to ...
- (console_putchar): ... this.
- [!STAGE1_5] (getkey): Renamed to ...
- [!STAGE1_5] (console_getkey): ... this.
- [!STAGE1_5] (checkkey): Renamed to ...
- [!STAGE1_5] (console_checkkey): ... this.
- * stage2/char_io.c [!STAGE1_5] (getkey): New function.
- [!STAGE1_5] (checkkey): Likewise.
- (grub_putchar): Likewise.
- * stage2/shared.h [!STAGE1_5] (terminal): Declared.
- [!STAGE1_5] (TERMINAL_CONSOLE): New macro.
- [!STAGE1_5] (TERMINAL_SERIAL): Likewise.
- (console_putchar): Declared.
- (serial_putchar): Likewise.
- (console_getkey): Likewise.
- (serial_getkey): Likewise.
- (console_checkkey): Likewise.
- (serial_checkkey): Likewise.
- * stage2/builtins.c (terminal): New global variable. The default
- is TERMINAL_CONSOLE.
- * grub/asmstub.c (grub_putchar): Renamed to ...
- (console_putchar): ... this.
- (getkey): Renamed to ...
- (console_getkey): ... this.
- (checkkey): Renamed to ...
- (console_checkkey): ... this.
-
-2000-07-12 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/Makefile.am (libgrub_a_CFLAGS): Added
- -I$(top_srcdir)/lib.
- * stage2/builtins.c [GRUB_UTIL]: Include device.h.
-
-2000-07-12 OKUJI Yoshinori <okuji@gnu.org>
-
- Segreate OS-specific helper functions from asmstub.c.
-
- * grub/asmstub.c [__linux__]: Don't include linux/hdreg.h,
- linux/major.h, linux/kdev_t.h, or linux/cdrom.h.
- [__FreeBSD__ || __NetBSD__ || __OpenBSD__]: Don't include
- sys/ioctl.h, sys/disklabel.h, or sys/ioctl.h.
- [HAVE_OPENDISK]: Don't include util.h.
- Include device.h.
- (DEFAULT_FD_CYLINDERS): Removed.
- (DEFAULT_FD_HEADS): Likewise.
- (DEFAULT_FD_SECTORS): Likewise.
- (DEFAULT_HD_CYLINDERS): Likewise.
- (DEFAULT_HD_HEADS): Likewise.
- (DEFAULT_HD_SECTORS): Likewise.
- (NUM_DISKS): Likewise.
- (init_device_map): Likewise.
- (get_floppy_disk_name): Likewise.
- (get_ide_disk_name): Likewise.
- (get_scsi_disk_name): Likewise.
- (check_device): Likewise.
- (get_drive_geometry): Likewise.
- * grub/main.c (no_floppy): Removed.
- (probe_second_floppy): Likewise.
- (floppy_disks): New global variable.
- (main): Set FLOPPY_DISKS to zero, if OPT_NO_FLOPPY. Set
- FLOPPY_DISKS to two, if OPT_PROBE_SECOND_FLOPPY.
- * lib/Makefile.am (AM_CFLAGS): New variable.
- * lib/device.h: New file.
- * lib/device.c: Likewise.
- * stage2/shared.h (no_floppy): Removed.
- (probe_second_floppy): Likewise.
- (check_device): Likewise.
- (floppy_disks): Declared.
-
-2000-07-02 OKUJI Yoshinori <okuji@gnu.org>
-
- * grub/main.c (usage): Enclose the mail address with parentheses
- and add a period into the end of the line. That's just a
- cosmetic change.
-
-2000-07-02 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/appendices.texi (Obtaining and Building GRUB): Indicate
- the Cygnus's binutils webpage instead of the hjl's site, since
- you can now use a public release (i.e. 2.10).
-
-2000-06-23 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/boot.c (load_image): Take an additional argument
- LOAD_FLAGS.
- If the kernel type is Linux and the bit
- KERNEL_LOAD_NO_MEM_OPTION in LOAD_FLAGS is set, don't pass a
- Linux's mem option automatically.
- * stage2/shared.h (load_image): Added the new argument.
- * stage2/builtins.c (kernel_func): If `--no-mem-option' is
- specified, set the bit KERNEL_LOAD_NO_MEM_OPTION in LOAD_FLAGS,
- otherwise, LOAD_FLAGS is zero.
-
-2000-06-22 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/tutorial.texi: Fixed some typos and syntax errors.
- * docs/user-ref.texi: Likewise.
-
-2000-06-21 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/stage2.c (run_menu): Initialize CUR_ENTRY at the
- definition.
- If SHOW_MENU is zero, don't display the menu interface. Instead,
- wait until the timeout is expired and then boot the default
- entry. If the user presses `ESC' during the timeout, set
- SHOW_MENU to one and break the loop.
- Display the menu if SHOW_MENU is true, instead of if
- GRUB_TIMEOUT is non-zero.
- Set SHOW_MENU to one before go to the label `restart'.
- * stage2/builtins.c (show_menu): New global variable.
- (hiddenmenu_func): New function.
- (builtin_hiddenmenu): New variable.
- (builtin_table): Added a pointer to BUILTIN_HIDDENMENU.
- * stage2/shared.h (show_menu): Declared.
-
-2000-06-19 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/mdate-sh: Moved to ...
- * mdate-sh: ... here.
- * docs/texinfo.tex: Moved to ...
- * texinfo.tex: ... here.
-
-2000-06-09 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/mb_info.h (AddrRangeDesc): Use one 64bits field instead
- of two 32bits fields for BaseAddr and Length, respectively.
- BaseAddrLow + BaseAddrHigh -> BaseAddr, LengthLow + LengthHigh
- -> Length.
- * stage2/builtins.c (displaymem_func): Print BaseAddr >> 32,
- BaseAddr & 0xFFFFFFFF, Length >> 32 and Length & 0xFFFFFFFF,
- instead of BaseAddrLow, BaseAddrHigh, LengthLow and LengthHigh,
- for MAP.
- * stage2/common.c (fakemap): Adjusted to the new definition of
- AddrRangeDesc.
- (mmap_avail_at): Change the type of TOP to unsigned long long.
- If TOP is greater than 0xFFFFFFFF, set it to 0xFFFFFFFF, since
- GRUB itself cannot deal with 64bits addresses at the moment.
- (init_bios_info): When getting a maximum available address from
- the memory map, use a new unsigned long long variable MAX_ADDR
- as the temporary variable instead of MEMTMP. This should allow
- GRUB to detect at most 4TB.
-
-2000-06-18 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/appendices.texi (FAQ): Added an question about Linux's
- `mem=' option and the answer.
-
-2000-06-17 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/boot.c (load_image): Pass a mem option to Linux, only
- if SRC has no substring "mem=".
-
-2000-06-17 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/compile: Removed.
- * netboot/compile: Likewise.
- * compile: New file. Copied from Automake.
-
-2000-06-16 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/boot.c (load_image): Don't remove the vga option after
- parsing it. Suggested by Tim Riker.
-
-2000-06-15 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/asm.S (grub_halt): Use jmp instead of jc, if INT 15
- AX=5307h fails.
-
-2000-06-15 OKUJI Yoshinori <okuji@gnu.org>
-
- * configure.in (AM_INIT_AUTOMAKE): Increase the version number.
- I wish that 0.5.96 will not be released actually...
-
- * stage2/builtins.c (halt_func): New function.
- (builtin_halt): New variable.
- (reboot_func): New function.
- (builtin_reboot): New variable.
- (builtin_table): Added pointers to BUILTIN_HALT and
- BUILTIN_REBOOT.
- * stage2/asm.S (grub_halt): New function.
- (grub_reboot): Likewise.
- * stage2/shared.h (grub_halt): Declared.
- (grub_reboot): Likewise.
- * grub/asmstub.c (grub_reboot): New function.
- (grub_halt): Likewise.
-
-2000-06-12 Gordon Matzigkeit <gord@fig.org>
-
- * stage2/stage2.c (run_menu): Don't display the menu if the
- timeout is zero. This makes for cleaner use as a noninteractive
- bootloader.
-
-2000-06-11 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/tutorial.texi (GNU/Linux): Added a caution about the
- "mem=" option.
-
-2000-06-11 OKUJI Yoshinori <okuji@gnu.org>
-
- * util/grub-install.in (convert): When $host_os is linux*, use
- the expression 's%\([sh]d[a-z]\)[0-9]*$%\1%' instead of
- 's%[0-9]*$%%', to get rid of the partition part. This fixes the
- bug "/dev/fd0" -> "/dev/fd". (But don't you think the naming is
- quite inconsistent with hard disks? Why not /dev/fd[a-z]?)
- Report by Pavel Roskin.
-
-2000-06-08 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/tutorial.texi (Network): The body is moved to ...
- (General usage of network support): ... this new section.
- (Diskless): New section.
- * docs/user-ref.texi (General commands): Added a description
- about the command "tftpserver".
-
-2000-06-08 OKUJI Yoshinori <okuji@gnu.org>
-
- * netboot/main.c (decode_rfc1533) [GRUB]: Eliminate trailing
- NULs in the NVT string for a configuration file name, if any.
- (decode_rfc1533): Likewise, if Extensions Path is present,
- eliminate the trailing NULs, if any.
- Also, check the length carefully to ensure that EXTPATH can fit
- in FNAME.
-
-2000-06-06 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/fsys_reiserfs.c: Added journaling to reiser.
- (reiserfs_journal_desc): new structure.
- (reiserfs_journal_commit): likewise.
- (reiserfs_journal_header): likewise.
- (fsys_reiser_info): Added fields for journaling.
- (journal_read): new function.
- (journal_init) likewise.
- (block_read): New function to read reiserfs blocks, which reads
- from the journal if it contains newer versions. All relevant
- devread calls are replaced with calls to this method.
- (reiserfs_mount): Check for journaling super block and call
- journal_init.
-
-2000-06-06 OKUJI Yoshinori <okuji@gnu.org>
-
- * netboot/main.c (dhcprequest) [GRUB]: Set the length of the
- Parameter Request List to (4 + 2).
- Set the list to RFC1533_VENDOR_MAGIC and
- RFC1533_VENDOR_CONFIGFILE in addition to the standard
- parameters.
- (decode_rfc1533) [GRUB]: If C is equal to
- RFC1533_VENDOR_CONFIGFILE, copy the contents of the tag to
- CONFIG_FILE.
- If C is equal to RFC1533_VENDOR_MAGIC, increment
- VENDOREXT_ISVALID.
- * netboot/etherboot.h [GRUB] (RFC1533_VENDOR_CONFIGFILE): New
- macro. Defined as 150.
-
-2000-06-03 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/asm.S (check_int13_extensions): Check the bitmap only
- if FORCE_LBA is zero.
- * stage2/bios.c (get_diskinfo): Get rid of the wrong check for
- the bit 0 of DRP.FLAGS. Now the bitmap check is correctly
- performed in the function check_int13_extensions.
-
-2000-06-02 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/user-ref.texi (Invoking the grub shell): Added a caution.
- Why don't so many people still understand that BIOS drive
- numbering are different from OS device naming? How many cautions
- and warnings should we write in the documentation? Sigh.
-
-2000-06-01 OKUJI Yoshinori <okuji@gnu.org>
-
- From Chip Salzenberg:
- * stage2/cmdline.c (enter_cmdline) [SUPPORT_DISKLESS]: Redisplay
- network configuration after clearing screen, before first prompt.
-
- * stage2/cmdline.c: Include <shared.h> instead of "shared.h".
- [SUPPORT_DISKLESS]: Include <etherboot.h>.
-
-2000-06-01 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (setup_func): Check if INSTALL_DRIVE is a
- hard disk as well as IMAGE_DRIVE, before trying to install a
- Stage 1.5. Reported by Pavel Roskin.
-
-2000-05-31 OKUJI Yoshinori <okuji@gnu.org>
-
- * acinclude.m4 (grub_ASM_ABSOLUTE_WITHOUT_ASTERISK): New
- function. Check if GAS requires absolute indirect calls/jumps
- with NO asterisk.
- * configure.in: Call grub_ASM_ABSOLUTE_WITHOUT_ASTERISK.
- * acconfig.h (ABSOLUTE_WITHOUT_ASTERISK): New macro entry.
- * netboot/pci.c (bios32_service) [!ABSOLUTE_WITHOUT_ASTERISK]:
- Prefix the operand to "lcall" with `*'.
- (pcibios_read_config_byte) [!ABSOLUTE_WITHOUT_ASTERISK]:
- Likewise.
- (pcibios_read_config_word) [!ABSOLUTE_WITHOUT_ASTERISK]:
- Likewise.
- (pcibios_read_config_dword) [!ABSOLUTE_WITHOUT_ASTERISK]:
- Likewise.
- (pcibios_write_config_byte) [!ABSOLUTE_WITHOUT_ASTERISK]:
- Likewise.
- (pcibios_write_config_word) [!ABSOLUTE_WITHOUT_ASTERISK]:
- Likewise.
- (pcibios_write_config_dword) [!ABSOLUTE_WITHOUT_ASTERISK]:
- Likewise.
- (check_pcibios) [!ABSOLUTE_WITHOUT_ASTERISK]: Likewise.
- * stage2/asm.S (chain_stage1) [!ABSOLUTE_WITHOUT_ASTERISK]:
- Prefix the operand to "ljmp" with `*'.
- (chain_stage2) [!ABSOLUTE_WITHOUT_ASTERISK]: Likewise.
- (big_linux_boot) [!ABSOLUTE_WITHOUT_ASTERISK]: Likewise.
-
-2000-05-29 Chip Salzenberg <chip@valinux.com>
-
- * stage2/shared.h (grub_memmove): Prototype to use void *.
- * stage2/char_io.c (grub_memmove): Define likewise.
-
-2000-05-30 Gordon Matzigkeit <gord@fig.org>
-
- * docs/user-ref.texi (Stage2 errors): Update error messages.
-
-2000-05-29 Pavel Roskin <pavel_roskin@geocities.com>
-
- * util/grub-install.in: Fix a typo that prevented error messages
- from appearing.
- Copy and remove files individually and exit with an error as
- soon as it fails.
- Show $log_file if --debug was given on the command line.
-
-2000-04-19 Gordon Matzigkeit <gord@fig.org>
-
- * stage2/cmdline.c (enter_cmdline): Don't give errors on empty
- command lines.
-
- * stage2/common.c (err_list): Clean up wordings slightly.
-
-2000-05-29 OKUJI Yoshinori <okuji@gnu.org>
-
- Based on a patch by Neal H Walfield <neal@walfield.org>:
- * netboot/misc.c [GRUB] (inet_aton): Defined.
- * netboot/main.c (arp_server_override): New function.
- * netboot/etherboot.h [GRUB] (arp_server_override): Declared.
- (inet_aton): Likewise.
- * stage2/builtins.c (tftpserver_func): New function.
- (builtin_tftpserver): New variable.
- (builtin_table): Added a pointer to BUILTIN_TFTPSERVER.
-
-2000-05-28 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/asm.S (codestart): Fix a typo: DISKLESS_SUPPORT ->
- SUPPORT_DISKLESS.
- * stage2/nbloader.S: Fix the image length and the memory length
- fields. They shouldn't contain the first sector for a tag.
- Mmh..., that is unclear as far as I see the Net Boot Image
- Proposal...
- * stage2/shared.h (STACKOFF): Enclosed with parentheses.
- (PROTSTACKINIT): Likewise.
-
-2000-05-27 OKUJI Yoshinori <okuji@gnu.org>
-
- Add diskless support, mostly based on patches by Christoph
- Plattner <Christoph.Plattner@dot.at>, but also based on a patch
- by Chip Salzenberg <chip@valinux.com> for PXE. Of course, I've
- modified both the patches thoroughly to adapt them to my
- preference.
-
- * configure.in (--enable-diskless): New option. Set a
- conditional DISKLESS_SUPPORT.
- * stage2/Makefile.am (noinst_HEADERS): Added nbi.h.
- (EXTRA_PROGRAMS): New variable.
- (pkgdata_DATA) [DISKLESS_SUPPORT]: Added
- nbgrub and pxegrub.
- (noinst_DATA) [DISKLESS_SUPPORT]: Added nbloader, pxeloader and
- diskless.
- (noinst_PROGRAMS) [DISKLESS_SUPPORT]: Added nbloader.exec,
- pxeloader.exec and diskless.exec.
- (PXELOADER_LINK): New variable.
- (BUILT_SOURCES) [DISKLESS_SUPPORT]: Added diskless_size.h.
- (diskless_exec_SOURCES): New variable.
- (diskless_exec_CFLAGS): Likewise.
- (diskless_exec_LDFLAGS): Likewise.
- (diskless_exec_LDADD): Likewise.
- (diskless_size.h): New target.
- (nbloader_exec_SOURCES): New variable.
- (nbloader_exec_CFLAGS): Likewise.
- (nbloader_exec_LDFLAGS): Likewise.
- (nbloader_exec-nbloader.o): New dependency.
- (nbgrub): New target.
- (pxeloader_exec_SOURCES): new variable.
- (pxeloader_exec_CFLAGS): Likewise.
- (pxeloader_exec_LDFLAGS): Likewise.
- (pxegrub): New target.
- * stage2/asm.S (install_partition): Set to 0xFFFFFF instead of
- 0x020000. What was the benefit from the previous setting?
- (codestart) [SUPPORT_DISKLESS]: Don't move %dl to BOOT_DRIVE.
- (boot_drive) [SUPPORT_DISKLESS]: Set to NETWORK_DRIVE instead of
- zero.
- * stage2/common.c: Include <shared.h> instead of "shared.h",
- just for a cosmetic reason.
- [SUPPORT_DISKLESS]: Include etherboot.h.
- [SUPPORT_DISKLESS] (setup_diskless_environment): New internal
- function.
- (init_bios_info) [SUPPORT_DISKLESS]: Call
- setup_diskless_environment after the memory initialization is
- finished. Return if fails.
- * stage2/nbloader.S: New file.
- * stage2/pxeloader.S: Likewise.
- * stage2/nbi.h: Likewise.
-
-2000-05-25 OKUJI Yoshinori <okuji@gnu.org>
-
- * netboot/fsys_tftp.c (buf_fill): Warn when amazing things
- happen.
- (tftp_dir): Revert previous change. Don't use TFTP_MIN_PACKET
- but calculate the appropriate length.
-
-2000-05-23 OKUJI Yoshinori <okuji@gnu.org>
-
- * netboot/fsys_tftp.c (tftp_dir): Append "0\0" to the request
- string, because the "tsize" option must be followed by zero,
- according to RFC 2349.
-
-2000-05-22 OKUJI Yoshinori <okuji@gnu.org>
-
- Synchronize the documentation with the code.
-
- * docs/user-ref.texi: Added ReiserFS as a supported filesystem.
- Updated the descriptions about `password', `install', `kernel',
- and `setup'.
- Added a description about `lock'.
- Added descriptions about ERR_UNALIGNED and ERR_PRIVILEGED.
- Added a description about the option `--force-lba' of
- the program `grub-install'.
- * docs/tutorial.texi: Updated the subsection for NetBSD.
-
-2000-05-21 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/asm.S (set_int13_handler): Don't use MBI to get the
- lower memory size. Instead, decrease it in the BIOS memory
- directly and set %eax to it, since MBI.MEM_LOWER may not be the
- same as [0x413] any longer due to the previous change.
-
- * grub/asmstub.c (CONVENTIONAL_MEMSIZE): Changed to 640 * 1024
- from 640. You didn't like the inconsistency between
- EXTENDED_MEMSIZE and CONVENTIONAL_MEMSIZE, did you?
- (get_memsize): Return CONVENTIONAL_MEMSIZE >> 10 instead of
- CONVENTIONAL_MEMSIZE, if TYPE is zero.
- (get_eisamemsize): Return EXTENDED_MEMSIZE >> 10 instead of
- EXTENDED_MEMSIZE / 1024. Just a cosmetic change.
- (MMAR_DESC_LENGTH): New macro. Defined as 20.
- (get_mmap_entry): Define a new variable DESC_TABLE statically,
- and copy the CONTth entry to *DESC if CONT is a correct index.
-
-2000-05-21 Chip Salzenberg <chip@valinux.com>
-
- * stage2/common.c (mmap_avail_at): New function, abstracted out
- of init_bios_info, to scan E820 memory map.
- (init_bios_info): Use mmap_avail_at for _both_ MBI.MEM_UPPER and
- MBI.MEM_LOWER.
-
-2000-05-17 OKUJI Yoshinori <okuji@gnu.org>
-
- Update the network support to Etherboot-4.6.1.
-
- * netboot/config.c (pci_nic_list) [INCLUDE_TULIP]: Added an
- entry for Davicom 9102.
- * netboot/epic100.c: Just copied.
- * netboot/pci.h: Likewise.
- * netboot/tulip.c: Likewise.
- * netboot/etherboot.h (tftp): Change the type of the first
- argument to const char * from char *.
- * netboot/main.c (tftp): Likewise.
-
-2000-05-13 OKUJI Yoshinori <okuji@gnu.org>
-
- * util/grub-install.in: If the program `cp' fails, exit with the
- status code 1. Suggested by Pavel Roskin.
-
-2000-05-13 OKUJI Yoshinori <okuji@gnu.org>
-
- From Pixel <pixel@mandrakesoft.com>:
- * stage2/pc_slice.h (PC_SLICE_TYPE_LINUX_EXTENDED): New macro.
- (IS_PC_SLICE_TYPE_EXTENDED): Added a check for
- PC_SLICE_TYPE_LINUX_EXTENDED.
-
-2000-05-05 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/common.c (init_bios_info) [!STAGE1_5]: When the memory
- map is present, search the maximum for MEMTMP in bytes instead
- of kilobytes and set EXTENDED_MEMORY to MEMTMP minus 1MB in
- kilobytes.
-
-2000-05-05 OKUJI Yoshinori <okuji@gnu.org>
-
- Ignore any memory holes when passing the maximum memory address
- to non-Multiboot kernels (i.e. Linux and *BSD).
-
- * stage2/common.c [!STAGE1_5] (extended_memory): New global
- variable.
- (init_bios_info) [!STAGE1_5]: Change the type of CONT, MEMTMP
- and ADDR to unsigned long from int.
- Set EXTENDED_MEMORY to MBI.MEM_UPPER by default.
- If MBI.MMAP_LENGTH is not zero, set EXTENDED_MEMORY to the
- maximum available address, ignoring any memory holes.
- If MBI.MMAP_LENGTH is zero but get_eisamemsize returns other
- than -1, set EXTENDED_MEMORY to (CONT >> 10) + 0x3c00 if CONT is
- non-zero, otherwise, set it to MEMTMP.
- * stage2/shared.h [!STAGE1_5] (extended_memory): Declared.
- * stage2/boot.c (load_image): Always pass the "mem=" option to a
- Linux kernel, using EXTENDED_MEMORY instead of MBI.MEM_UPPER.
- (bsd_boot): Use EXTENDED_MEMORY instead of MBI.MEM_UPPER.
-
-2000-04-30 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage1/stage1.S (message): Use lodsb instead of incw and movb.
- From Andrew Clausen <clausen@gnu.org>.
-
- * stage1/stage1.S (copy_buffer): Set %cx to 0x100 and use movsw
- instead of movsb, since it is guaranteed that the region is
- properly aligned.
-
-2000-04-29 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (setup_func): Use SECTOR_BITS instead of
- SECTOR_SIZE to compute BLOCKSIZE.
-
-2000-04-26 OKUJI Yoshinori <okuji@gnu.org>
-
- * netboot/depca.c: Copied from Etherboot-4.6.0.
-
-2000-04-23 OKUJI Yoshinori <okuji@gnu.org>
-
- More security-related features.
-
- * stage2/builtins.c (auth): New global variable.
- (configfile_func): Clear AUTH before jumping to cmain.
- (lock_func): New function.
- (builtin_lock): New variable.
- (password_func): Make sure that LEN + 2 is less than or equal to
- PASSWORD_BUFLEN, because now the password must be terminated
- with double NULs, in order to permit an empty configuration file
- name.
- Copy LEN bytes from ARG to PASSWORD, instead of LEN + 1 bytes.
- Clear the rest of the buffer PASSWORD.
- (builtin_table): Added a pointer to BUILTIN_LOCK.
- * stage2/common.c (err_list): Added an entry for ERR_PRIVILEGED.
- * stage2/stage2.c (run_menu): If AUTH is true, show the messages
- for a non-password configuration, even if PASSWORD is not NULL.
- Likewise, if AUTH is true, allow the user to use privileged
- instructions (such as `c').
- If a correct password is entered, check if *PPTR is NUL or not.
- If it is NUL, set AUTH to 1 and go to the label restart,
- otherwise, copy PPTR to NEW_FILE, clear AUTH, and return.
- * stage2/shared.h (grub_error_t): Added a new constant
- ERR_PRIVILEGED.
- (auth): Declared.
-
-2000-04-23 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/user-ref.texi (Command-line-specific commands): Don't use
- the command @var for the argument "file" to the command
- "configfile" on the definition.
-
-2000-04-22 OKUJI Yoshinori <okuji@gnu.org>
-
- Update the network support to Etherboot 4.5.8.
-
- * configure.in (--enable-3c590): New option.
- (--enable-3c595): Likewise.
- (--enable-depca): Likewise.
- (--enable-lance): Likewise.
- (--enable-ns8390): Likewise.
- (--enable-ntulip): Likewise.
- (--enable-lancepci): Removed.
- (--enable-nepci): Likewise.
- (--enable-otulip): Likewise.
- (--enable-smc9000): The duplicated one is named to ...
- (--enable-smc9000-scan): ... this. This was a typo, perhaps.
-
- * netboot/Makefile.am (libdrivers_a_SOURCES): Removed
- byteorder.h, if.h, netboot_config.h and netdevice.h, and added
- cards.h.
- (EXTRA_libdrivers_a_SOURCES): Removed ntulip.c and tulip.h, and
- added 3c595.c, 3c595.h, depca.c, otulip.c and otulip.h.
- (libdrivers_a_CFLAGS): Define FSYS_TFTP as 1 instead of empty.
- (EXTRA_DIST): Removed ntulip.txt, and added cs89x0.txt and
- tulip.txt.
- (3c595_drivers): New variable.
- (depca_drivers): Likewise.
- (lance_drivers): Removed lancepci.o and added lance.o.
- (ns8390_drivers): Removed nepci.o and added ns8390.o.
- (ntulip_drivers): Deleted.
- (otulip_drivers): New variable.
- ($(3c595_drivers)): New target.
- ($(depca_drivers)): Likewise.
- ($(ntulip_drivers)): Deleted.
- ($(otulip_drivers)): New target.
- (3c590_o_CFLAGS): New variable.
- (3c595_o_CFLAGS): Likewise.
- (depca_o_CFLAGS): Likewise.
- (lancepci_o_CFLAGS): Deleted.
- (lance_o_CFLAGS): New variable.
- (nepci_o_CFLAGS): Deleted.
- (ns8390_o_CFLAGS): New variable.
- (ntulip_o_CFLAGS): Deleted.
- (otulip_o_CFLAGS): New variable.
-
- * netboot/3c90x.c: Updated to Etherboot-4.5.8.
- * netboot/3c90x.txt: Likewise.
- * netboot/cs89x0.c: Likewise.
- * netboot/cs89x0.h: Likewise.
- * netboot/eepro100.c: Likewise.
- * netboot/epic100.c: Likewise.
- * netboot/epic100.h: Likewise.
- * netboot/i82586.c: Likewise.
- * netboot/lance.c: Likewise.
- * netboot/linux-asm-io.h: Likewise.
- * netboot/linux-asm-string.h: Likewise.
- * netboot/nic.h: Likewise.
- * netboot/ns8390.c: Likewise.
- * netboot/ns8390.h: Likewise.
- * netboot/pci.c: Likewise.
- * netboot/pci.h: Likewise.
- * netboot/rtl8139.c: Likewise.
- * netboot/sk_g16.c: Likewise.
- * netboot/sk_g16.h: Likewise.
- * netboot/smc9000.c: Likewise.
- * netboot/smc9000.h: Likewise.
- * netboot/tiara.c: Likewise.
- * netboot/tulip.c: Likewise.
- * netboot/via-rhine.c: Likewise.
-
- * netboot/config.c: Updated to Etherboot-4.5.8 and modified (see
- below).
- [GRUB] (print_config): Undefined.
- (eth_probe) [GRUB]: If PROBED is true, do nothing. Otherwise,
- clear NETWORK_READY and ARPTABLE, set ROM to ROM_INFO_LOCATION,
- and set PROBED to 1 if succeeds.
- * netboot/etherboot.h: Likewise,
- (GRUB): New macro.
- [GRUB]: Include <shared.h>.
- [GRUB] (NO_DHCP_SUPPORT): Undefined.
- [GRUB] (RELOC): Defined as zero.
- [GRUB] (INTERNAL_BOOTP_DATA): Defined as one.
- [GRUB] (USE_INTERNAL_BUFFER): Likewise.
- [GRUB] (BACKOFF_LIMIT): Defined as 7.
- [GRUB] (CTRL_C): New macro.
- [GRUB] (print_network_configuration): Declared.
- [GRUB] (ip_abort): Likewise.
- [GRUB] (network_ready): Likewise.
- * netboot/fsys_tftp.c: Don't include <netboot_config.h>.
- (isocket): Renamed to ...
- (iport): ... this.
- (osocket): Renamed to ...
- (oport): ... this.
- (bcounter): New variable.
- (buf_fill): When checking the block order, see BCOUNTER as well
- as BLOCK.
- Don't process a packet, if BLOCK minus PREVBLOCK is not 1,
- instead of if BLOCK is less than or equal to PREVBLOCK.
- Increment BCOUNTER after reseting RETRY.
- (send_rrq): Clear BCOUNTER.
- Call await_reply with AWAIT_QDRAIN.
- * netboot/main.c: Don't include <netboot_config.h>.
- (dhcpdiscover): Made const.
- (dhcprequest): Likewise. Updated the contents.
- (broadcast): Made const.
- (udp_transmit): Copied.
- (tftp): Likewise.
- (bootp): Likewise.
- (rarp): Likewise.
- (await_reply): Likewise.
- (decode_rfc1533): Likewise.
- (rfc951_sleep): Likewise.
- (cleanup_net): Likewise.
- * netboot/misc.c (sleep): Copied.
- (twiddle): Likewise.
- (getdec): Likewise.
- * netboot/osdep.h: Copied and modified (see below).
- [GRUB] (ETHERBOOT32): Used the same definition as Linux and
- FreeBSD.
- [GRUB] (ntohl): Likewise.
- [GRUB] (htonl): Likewise.
- [GRUB] (ntohs): Likewise.
- [GRUB] (htons): Likewise.
- [GRUB] (swap32): Likewise.
- [GRUB] (swap16): Likewise.
- [GRUB]: Include "linux-asm-io.h".
-
- * netboot/byteorder.h: Removed.
- * netboot/if.h: Likewise.
- * netboot/netboot_config.h: Likewise.
- * netboot/netdevice.h: Likewise.
- * netboot/ntulip.c: Likewise.
- * netboot/ntulip.txt: Likewise.
- * netboot/tulip.h: Likewise.
-
- * netboot/3c595.c: New file. Copied from Etherboot-4.5.8.
- * netboot/3c595.h: Likewise.
- * netboot/cards.h: Likewise.
- * netboot/cs89x0.txt: Likewise.
- * netboot/depca.c: Likewise.
- * netboot/otulip.c: Likewise.
- * netboot/otulip.h: Likewise.
- * netboot/tulip.txt: Likewise.
-
-2000-02-29 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/common.c (err_list): Added message for ERR_UNALIGNED.
- * stage2/shared.h [!STAGE1_5] (disk_read_hook,disk_read_func): New
- parameters offset and length.
- (ERR_UNALIGNED): New error code.
- * stage2/disk_io.c (rawread) [!STAGE1_5]: Call disk_read_func with
- offset and length.
- * stage2/builtin.c (disk_read_print_func): Print offset and length.
- (blocklist_func): Print detailed byte ranges for partial sectors.
- (install_func): Detect partial sectors and print error message.
-
-2000-04-18 Pavel Roskin <pavel_roskin@geocities.com>
-
- * util/grub-install.in: Don't use `!' in `test' for more
- portability.
- Don't use `for' without `in' for compatability with ash.
- Check install_device before running grub if possible. Added
- error messages if install_device is not set or not unique.
- Exit if mkdir fails.
- Add a message about successful installation.
- Remove unneeded backslash in the final message.
- (convert): use `test -b' instead of `test -e' because ash
- doesn't understand the later. Correct error message accordingly.
-
-2000-04-17 OKUJI Yoshinori <okuji@gnu.org>
-
- The user doesn't have to recompile GRUB for his/her buggy BIOS
- any longer. It is configurable to ignore the LBA support bitmap
- at the installation time.
-
- * stage1/stage1.S (force_lba): New variable.
- (stage2_address): Moved forwards, to align some variables in
- natural boundaries.
- (real_start): Check if FORCE_LBA is non-zero, if so, jump to
- skip_lba_bitmap_check, otherwise, check if bit 0 of the support
- bitmap is non-zero.
- Don't use #ifdef for CHECK_LBA_SUPPORT_BITMAP.
- (skip_lba_bitmap_check): New label.
- * stage1/stage1.h (COMPAT_VERSION_MINOR): Set to 1.
- (STAGE1_FORCE_LBA): New macro.
- (STAGE1_STAGE2_ADDRESS): Set to 0x42.
- (STAGE1_STAGE2_SECTOR): Set to 0x44.
- (STAGE1_STAGE2_SEGMENT): Set to 0x48.
- * stage2/asm.S (force_lba): New variable.
- * stage2/bios.c (get_diskinfo): Don't use #ifdef for
- CHECK_LBA_SUPPORT_BITMAP. Instead, check if FORCE_LBA is
- non-zero. If so, don't check the bit 0 of DRP.FLAG.
- * stage2/builtins.c (install_func): Check if a new option
- `--force-lba' is specified. If specified, set IS_FORCE_LBA to 1
- and set ARG to a value returned by skip_to. Otherwise,
- IS_FORCE_LBA is zero.
- Set the "force LBA" flag in STAGE1_BUFFER (the offset is
- STAGE1_FORCE_LBA) to IS_FORCE_LBA.
- Likewise, set the "force LBA" flag in STAGE2_SECOND_BUFFER
- (the offset is STAGE2_FORCE_LBA) to IS_FORCE_LBA.
- If IS_STAGE1_5 is true, then modify the Stage2, regardless of
- the presence of the option REAL_CONFIG_FILE. Set the "force LBA"
- flag in SCRATCHADDR (the offset is STAGE2_FORCE_LBA) to
- IS_FORCE_LBA.
- (builtin_install): Added description about `--force-lba' into
- the docs.
- (setup_func): Check if `--force-lba' is specified in ARG. If
- specified, set IS_FORCE_LBA to 1 and set ARG to a value returned
- by skip_to. Otherwise, IS_FORCE_LBA is zero.
- If IS_FORCE_LBA is true, prepend "--force-lba " to CMD_ARG.
- (builtin_setup): Added descriptions about `--force-lba' into the
- docs.
- * stage2/shared.h (STAGE2_FORCE_LBA): New macro.
- (STAGE2_VER_STR_OFFS): Set to 0xe.
- (force_lba): Declared.
- * util/grub-install.in (force_lba): New variable. Set to an
- empty sting by default.
- (usage): Added a description about `--force-lba'.
- (--force-lba): Checked in the option handling code. If
- specified, set FORCE_LBA to "--force-lba".
- Run the command "setup" with $force_lba added before
- $install_drive.
- * configure.in (--disable-lba-support-bitmap): Removed.
-
-2000-04-15 OKUJI Yoshinori <okuji@gnu.org>
-
- * util/grub-install.in (root_device): Append `/' to ${rootdir},
- since ROOTDIR may be empty. Reported by Satoshi Nagayasu
- <snaga@oak.forus.or.jp>.
-
-2000-04-15 Jochen Hoenicke <jochen@gnu.org>
-
- * configure.in: Added --disable-reiserfs option.
- * stage2/Makefile.am (libgrub_a_SOURCES): Added fsys_reiserfs.c.
- (libgrub_a_CFLAGS): Added -DFSYS_REISERFS=1.
- (pkgdata_DATA): Added reiserfs_stage1_5.
- (noinst_PROGRAMS): Added reiserfs_stage1_5.exec.
- (pre_stage2_exec_SOURCES): Added fsys_reiserfs.c.
- (reiserfs_stage1_5_exec_SOURCES): New variable.
- (reiserfs_stage1_5_exec_CFLAGS): Likewise.
- (reiserfs_stage1_5_exec_LDFLAGS): Likewise.
- * stage2/disk_io.c (fsys_table): Added reiserfs entry.
- * stage2/filesys.h (FSYS_REISERFS_NUM): New macro.
- [FSYS_REISERFS] (reiserfs_mount, reiserfs_read, reiserfs_dir,
- reiserfs_embed): Declare external function from fsys_reiserfs.c.
- [!NUM_FSYS] (NUM_FSYS): Added FSYS_REISERFS_NUM.
- * stage2/builtins.c (setup_func): Added reiserfs to
- STAGE1_5_MAP.
- * stage2/shared.h (STAGE2_ID_REISERFS_STAGE1_5): New macro.
- [STAGE1_5] [FSYS_REISERFS] (STAGE2_ID): Defined to
- STAGE2_ID_REISERFS_STAGE1_5.
- * stage2/fsys_reiserfs.c: New file.
-
- * stage2/builtins.c (embed_func): Call open_device instead of
- open_partition.
- Don't check if the filesystem is FFS. Instead, check if
- FSYS_TABLE[FSYS_TYPE].EMBED_FUNC is NULL and, if not, call it.
- (find_func): When CURRENT_SLICE is not a BSD slice, check if the
- file can be opened, only if open_device succeeds.
- * stage2/filesys.h (fsys_table): New entry embed_func.
- (ffs_embed): Declared.
- * stage2/disk_io.c (fsys_table): Fill embed_func entries. The
- entry for FFS is ffs_embed and the others are NULLs.
- * stage2/fsys_ffs.c (ffs_embed): New function.
-
- * stage2/shared.h (SECTOR_SHIFT): New constant with
- (1 << SECTOR_SHIFT) == SECTOR_SIZE.
- * stage2/shared.h [!NO_BLOCK_FILES] (block_files): No longer
- extern.
- * stage2/disk_io.c [!NO_BLOCK_FILES] (block_files): Likewise.
- (rawread, devread): Use SECTOR_BITS.
- (rawread): Fixed calculation of BUFADDR if an error occured. Set
- it to BUFFERADDR + BYTE_OFFSET instead of BUFFERSEG +
- BYTE_OFFSET.
- (grub_close) [!NO_BLOCK_FILES]: If BLOCK_FILE is non-zero,
- return immediately.
- (grub_close): Don't check if FSYS_TYPE is NUM_FSYS.
- * stage2/fsys_fat.c (log2): New inline function.
- (fat_mount): Use log2 instead of calculating the size/bit by a
- loop.
-
-2000-04-12 OKUJI Yoshinori <okuji@gnu.org>
-
- * configure.in: Use AC_PATH_PROG instead of AC_PATH_TOOL,
- because I don't want to use the CVS version. Now you can use
- autoconf 2.13.
-
-2000-04-10 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/stage2.c (run_menu): In the case where C is `o', check
- if ENTRYNO is less than 11. If not, increase FIRST_ENTRY instead
- of ENTRYNO. Reported by Pixel <pixel@mandrakesoft.com>.
-
-2000-04-09 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage1/depcomp: Removed, because it makes `make dist'
- unworkable.
-
- For developers: Don't run automake with --add-missing. Instead,
- you should specify --force-missing. If you really want to add a
- script from automake, copy it at hand. *sigh*
-
-2000-04-05 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (kernel_func): Added missing ``size''
- arguments into `grub_memcmp's. Reported by Christoph Plattner
- <christoph.plattner@dot.at>.
-
- From Torsten Duwe <duwe@caldera.de>:
- * stage2/boot.c (load_initrd): Mask the address with 0x3FFFFFFF
- instead of 0xFFFFFFFF to place the initrd below 1GB.
- (load_image): In Linux boot, add the option "mem=" only if more
- than 64MB are present.
- * grub/asmstub.c [__linux__]: Include <linux/cdrom.h> for
- CDROM_GET_CAPABILITY.
- [__FreeBSD__ || __NetBSD__ || __OpenBSD__]: Include <sys/cdio.h>
- for CDIOCCLRDEBUG.
- (check_device) [__linux__] [CDROM_GET_CAPABILITY]: If ioctl for
- CDROM_GET_CAPAIBILITY succeeds, return zero.
- [__FreeBSD__ || __NetBSD__ || __OpenBSD__] [CDIOCCLRDEBUG]: If
- ioctl for CDIOCCLRDEBUG succeeds, return zero.
-
- * stage2/boot.c (load_initrd): Subtract 0x1000 (one page size)
- from MOVETO, to avoid a Linux 2.3.xx's bug.
-
-2000-04-03 OKUJI Yoshinori <okuji@gnu.org>
-
- Add a dirty hack into the kernel loader so that the user can
- force GRUB to load NetBSD ELF kernels. The support code is
- mostly stolen from a patch by Pavel Roskin.
-
- * stage2/boot.c (load_image): Added an optional argument
- SUGGESTED_TYPE.
- If BUFFER is a bootable ELF image and SUGGESTED_TYPE is
- KERNEL_TYPE_NETBSD, then load it as an ELF image and set STR2 to
- "NetBSD" and TYPE to SUGGESTED_TYPE.
- If the image is a Linux kernel and SUGGESTED_TYPE is not
- KERNEL_TYPE_NONE, make sure that SUGGESTED_TYPE matches up to
- the Linux kernel type.
- If TYPE is KERNEL_TYPE_NETBSD, set MEMADDR to
- RAW_ADDR (phdr->paddr & 0xFFFFFF) like FreeBSD.
- If SUGGESTED_TYPE is not KERNEL_TYPE_NONE, make sure that
- SUGGESTED_TYPE is equal to TYPE.
- (bsd_boot): If TYPE is not KERNEL_TYPE_FREEBSD (i.e. NetBSD or
- OpenBSD) and the bit MB_INFO_AOUT_SYMS is set, set END_MARK to
- MBI.SYMS.A.ADDR + 4 + MBI.SYMS.A.TABSIZE + MBI.SYMS.A.STRSIZE.
- If the bit is clear, set END_MARK to 0.
- Pass END_MARK to *ENTRY_ADDR instead of directly calculating the
- end of symbols.
- * stage2/shared.h (load_image): Added the argument
- SUGGESTED_TYPE to the prototype.
- * stage2/builtins.c (kernel_func): Added a new option,
- `--type=TYPE'. Check if ARG is started with "--type=".
- If so, set SUGGESTED_TYPE to KERNEL_TYPE_NETBSD,
- KERNEL_TYPE_FREEBSD, KERNEL_TYPE_NETBSD, KERNEL_TYPE_LINUX,
- KERNEL_TYPE_BIG_LINUX, KERNEL_TYPE_MULTIBOOT if ARG is "netbsd",
- "freebsd", "openbsd", "linux", "biglinux", "multiboot",
- respectively. Otherwise, set ERRNUM to ERR_BAD_ARGUMENT and
- return 1. Set KERNEL_ARG to a string after the option.
- (builtin_kernel): Added a description about the new option.
-
-2000-04-03 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/stage2.c (run_menu) [GRUB_UTIL]: Removed a nested
- "#ifdef GRUB_UTIL" ... "#endif".
- * stage2/builtins.c (unhide_func): Don't modify SAVED_DRIVE or
- SAVED_PARTITION.
- (hide_func): Likewise.
- * stage2/disk_io.c (set_partition_hidden_flag): Use
- CURRENT_DRIVE and CURRENT_PARTITION instead of SAVED_DRIVE and
- SAVED_PARTITION. Check if bit 7 in CURRENT_DRIVE is non-zero
- instead of if CURRENT_DRIVE is non-zero.
-
- * grub/asmstub.c (init_device_map): Change the message
- "Probe devices..." to "Probing devices...". Suggested by Neal H
- Walfield.
-
- * stage2/pc_slice.h (PC_SLICE_TYPE_HIDDEN_FLAG): Move the
- definition before the PC partition type definitions.
- (IS_PC_SLICE_TYPE_FAT): Clear the hidden flag in TYPE before
- checking if TYPE is either of the FAT partition types. Reported
- by Thomas Schweikle <tschweikle@fiducia.de>.
-
-2000-04-02 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (setup_func): Don't read a stage 1.5 to get
- the size. Use FILEMAX instead.
- If embed_func fails (i.e. ERRNUM is non-zero), goto fail.
-
-2000-04-02 OKUJI Yoshinori <okuji@gnu.org>
-
- Suggested by Neal H Walfield <neal@walfield.org>:
- * stage2/common.c (init_bios_info): Removed a nested
- "#ifndef STAGE1_5" ... "#endif".
- * util/grub-install.in: Quote most of the references to
- shell variables by double quotation marks.
- (usage): Added a description about the argument.
- * stage2/builtins.c (setup_func): Change each of the messages
- when running embed_func and install_func. "Run" -> "Running".
- If install_func succeeds, print a message ("Done.").
-
- From Frank Mehnert <fm3@os.inf.tu-dresden.de>:
- * stage2/char_io.c (convert_to_ascii) [!STAGE1_5]: Accept 'X'
- and 'b' as well. If C is 'X' or 'b', then set MULT to 16.
- (grub_printf): Set a new variable MASK to 0xFFFFFFFF by default.
- Mask *DATAPTR with MASK when calling convert_to_ascii.
- (grub_printf) [!STAGE1_5]: Added 'b' and 'X'. If C is 'b', set
- MASK to 0xFF and fall through to the case 'u'. 'X' is the same
- as 'x'.
-
- From Josip Rodin <joy@cibalia.gkvk.hr>:
- * grub.texi: Several awkward English sentences are fixed.
- * tutorial.texi: Likewise.
- * user-ref.texi: Likewise.
- * appendices.texi: Likewise.
-
-2000-03-27 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage1/depcomp: New file. Automake forces to install it. This
- is a known bug, so I will remove this when Tom fixes it.
- * configure.in (AM_INIT_AUTOMAKE): Don't get the package name
- and the version from debian/changelog. This is a workaround.
-
-2000-03-20 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/Makefile.am (nodist_pkgdata_DATA): Renamed to ...
- (pkgdata_DATA): ... this. DATA is not distributed by default.
- (CLEANFILES): Delete the first one. I don't know why this
- variable was duplicated.
- Set to $(pkgdata_DATA) instead of $(nodist_pkgdata_DATA).
- (start_exec_DEPENDENCIES): Removed. This doesn't make sense.
- (start_exec-start.o): New rule.
- * depcomp: New file. Copied from automake.
- * missing: Updated from automake.
-
-2000-03-15 OKUJI Yoshinori <okuji@gnu.org>
-
- * netboot/Makefile.am (EXTRA_libdrivers_a_SOURCES): 3c89x0.h ->
- cs89x0.h. Just a typo.
-
-2000-03-10 Gordon Matzigkeit <gord@fig.org>
-
- * debian/rules: Strip mbchk.
-
- * debian/postinst: Fix up /usr/doc symlink creation.
-
-2000-03-01 OKUJI Yoshinori <okuji@gnu.org>
-
- * netboot/fsys_tftp.c (tftp_dir): Add BUF_READ into FILEMAX
- after BUF_EOF becomes non-zero. Reported by Per Lundberg.
-
-2000-03-01 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (color_func): Return 1 if safe_parse_maxint
- returns zero instead of non-zero. Reported by Magnus Holmberg
- <pucko@lysator.liu.se>.
-
-2000-02-29 OKUJI Yoshinori <okuji@gnu.org>
-
- * grub/asmstub.c [__linux__]: Include <linux/kdev_t.h> for the
- macro MAJOR. From Kalle Olavi Niemitalo <tosi@ees2.oulu.fi>.
-
-2000-02-27 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/tutorial.texi (Network): New chapter.
-
-2000-02-26 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/help2man: Upgraded to 1.020.
- * docs/grub.8: Regenerated.
- * docs/grub-install.8: Likewise.
- * docs/mbchk.1: Likewise.
-
- * docs/tutorial.texi (Boot): Rewritten heavily. Added the notes
- on FreeBSD, NetBSD, OpenBSD, DOS/Windows and SCO UnixWare.
- * docs/menu.lst: Load "/boot/loader" instead of "/kernel" in the
- FreeBSD entry. This is consistent with the documentation.
-
-2000-02-25 OKUJI Yoshinori <okuji@gnu.org>
-
- * netboot/fsys_tftp.c (tftp_read): Set BUF_READ to zero if
- FILEPOS is less than SAVED_FILEPOS, before calling buf_fill.
- Don't discard all of the copied data so that we can move FILEPOS
- backwards cheaply. Now SAVED_FILEPOS indicates the file position
- corresponding to the first byte of BUF. If (FILEPOS -
- SAVED_FILEPOS) is greater than (FSYS_BUFLEN / 2), move the data
- forwards and add (FSYS_BUFLEN / 2) into SAVED_FILEPOS and
- subtract the same value from BUF_READ.
-
-2000-02-24 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/disk_io.c [!STAGE1_5] (print_fsys_type): Mask
- CURRENT_SLICE with 0xFF when printing the partition type.
-
- * grub/asmstub.c [__linux__]: Include <linux/major.h> for the
- definition FLOPPY_MAJOR.
- (check_device) [__linux__]: Skip the HDIO_GETGEO ioctl if the
- major number of ST.ST_RDEV is FLOPPY_MAJOR.
-
-2000-02-21 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/disk_io.c (check_BSD_parts) [!STAGE1_5]: Use the term
- "BSD sub-partition" instead of "BSD slice" for consistency.
-
- * stage2/builtins.c (boot_func): Copy the partition table to
- BOOT_PART_TABLE instead of (BOOTSEC_LOCATION +
- BOOTSEC_PART_OFFSET). Don't use grub_memmove, but copy it
- directly, since memcheck is too strict.
- * stage2/disk_io.c (real_open_partition) [!STAGE1_5]: Set
- CUR_PART_ADDR to (BOOT_PART_TABLE + (i << 4)).
- * stage2/shared.h (BOOT_PART_TABLE): New macro.
- (chain_stage1): Change the types of all the arguments to
- unsigned long.
- (chain_stage2): Likewise.
- * grub/asmstub.c (chain_stage1): Adjusted to the prototype.
- (chain_stage2): Likewise.
-
-2000-02-21 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/disk_io.c (check_BSD_parts) [!STAGE1_5]: If the BSD
- label is invalid, print a message with the partition type in the
- case where FLAGS is non-zero and DO_COMPLETION is zero.
-
-2000-02-20 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/user-ref.texi (Command-line-specific commands): Added a
- description about "cmp".
- * docs/appendices.texi (Reporting bugs): Rewritten.
-
-2000-02-20 OKUJI Yoshinori <okuji@gnu.org>
-
- Update the netboot code to Etherboot 4.4.3.
-
- * netboot/netboot_config.h: Copied from etherboot-4.4.3.
- * netboot/cs89x0.h: Likewise.
- * netboot/cs89x0.c: Likewise.
- * netboot/i82586.c: Likewise.
- * netboot/lance.c: Likewise.
- * netboot/linux-asm-string.h: Likewise.
- * netboot/nic.h: Likewise.
- * netboot/ntulip.c: Likewise.
- * netboot/osdep.h: Likewise.
- * netboot/pci.h: Likewise.
- * netboot/pci.c: Likewise.
- * netboot/rtl8139.c: Likewise.
- * netboot/tiara.c: Likewise.
-
-2000-02-19 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (cmp_func): New function.
- (builtin_cmp): New variable.
- (builtin_table): Added a pointer to BUILTIN_CMP.
-
- * stage2/fsys_fat.c (fat_mount): Check if BPB.SECTS_PER_CLUST is
- zero after reading the BPB to avoid zero division.
-
-2000-02-18 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/disk_io.c [!STAGE1_5] (make_saved_active): Make sure
- that SAVED_PARTITION is not an extended partition.
- If SAVED_DRIVE is not a hard disk drive, set ERRNUM to
- ERR_DEV_VALUES and return zero.
-
- * netboot/3c59x.c: Removed.
- * netboot/Makefile.am (EXTRA_libdrivers_a_SOURCES): Deleted
- 3c59x.c.
- (3c59x_drivers): Deleted.
- (3c59x_o_CFLAGS): Likewise.
- * configure.in (--enable-3c59x): Likewise.
-
-2000-02-17 OKUJI Yoshinori <okuji@gnu.org>
-
- * configure.in (--enable-3c90x): Add -DINCLUDE_3C90X=1 instead
- of -DINCLUDE_3C90x=1. This was just a typo. Reported by Per
- Lundberg.
-
-2000-02-17 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/fsys_fat.c (fat_read): Forgot to increase BUF.
- (fat_dir): Use fat_read instead of grub_read; this makes
- setting the FSMAX unnecessary.
- (fat_mount): FSMAX is no longer set.
-
-2000-02-16 Jochen Hoenicke <jochen@gnu.org>
-
- * stage2/char_io.c (grub_isspace): Make carriage return a white
- space.
-
- * stage2/fsys_fat.c (fat_dir): Long filename support.
- (NAME_BUF): New macro.
- * stage2/fat.h (FAT_LONGDIR_ID, FAT_LONGDIR_ALIASCHECKSUM,
- FAT_ATTRIB_LONGNAME): New Macros.
-
- * stage2/fsys_fat.c (fat_create_blocklist): Deleted, instead
- fat_read is implemented.
- (fat_read): new function.
- * stage2/disk_io.c (fsys_table): Use fat_read.
- * stage2/filesys.h: Declare fat_read, remove NO_BLOCK_FILES
- hack.
- * stage2/Makefile.am: Compile fat_stage1_5 with
- -DNO_BLOCK_FILES=1.
-
- * stage2/fat.h (fat_bpb): New structure describing bpb.
- (FAT_CVT_U16): New macro.
- (FAT_BPB_CHECK_SIG, FAT_BPB_NUM_SECTORS,
- FAT_BPB_BYTES_PER_SECTOR, FAT_BPB_SECT_PER_CLUS, FAT_BPB_NUMFAT,
- FAT_BPB_RESERVED_SECTORS, FAT_BPB_FAT_SECTORS_16,
- FAT_BPB_FAT_SECTORS_32, FAT_BPB_IS_FAT32, FAT_BPB_FAT_SECTORS,
- FAT_BPB_FAT_START, FAT_BPB_ROOT_DIR_CLUSTER,
- FAT_BPB_HIDDEN_SECTORS, FAT_BPB_ROOT_DIR_START,
- FAT_BPB_ROOT_DIR_LENGTH, FAT_BPB_DATA_OFFSET,
- FAT_BPB_NUM_CLUST): Macros removed.
- * stage2/fsys_fat.c (fat_superblock): New structure containing
- all info about currently mounted filesystem.
- (FAT_SUPER): New Macro.
- (BPB): Macro removod.
- (fat_mount): Use fat_bpb structure, fill FAT_SUPER.
- (fat_read, fat_dir): Use FAT_SUPER info.
-
-2000-02-16 OKUJI Yoshinori <okuji@gnu.org>
-
- Pass the boot partition information to a chain-loader, in the
- partition table area of the loader, instead of right before the
- loaded address. Reported by takehiro@coral.ocn.ne.jp (Takehiro
- Suzuki).
-
- * stage2/builtins.c (chainloader_func): Embed the partition
- table of the boot drive in the partition table area of the
- chain-loader, if the boot drive is a hard disk drive.
- Pass BOOT_PART_ADDR instead of (BOOTSEC_LOCATION - 16) as the
- third argument for the function chain_stage1.
- * stage2/disk_io.c [!STAGE1_5] (boot_part_addr): New variable.
- [!STAGE1_5] (boot_part_offset): Likewise.
- [!STAGE1_5] (cur_part_offset): Likewise.
- [!STAGE1_5] (cur_part_addr): Likewise.
- [!STAGE1_5] (cur_part_desc): Removed.
- (real_open_partition) [!STAGE1_5]: Set CUR_PART_OFFSET and
- CUR_PART_ADDR to PART_OFFSET and (BOOTSEC_LOCATION +
- PC_SLICE_OFFSET + (i << 4)), respectively.
- [!STAGE1_5] (set_bootdev): Set BOOT_PART_OFFSET and
- BOOT_PART_ADDR to CUR_PART_OFFSET and CUR_PART_ADDR,
- respectively.
- * stage2/shared.h (boot_part_addr): Declared.
- (boot_part_offset): Likewise.
-
-2000-02-12 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (geometry_func): Attempt to read the first
- sector to examine if LBA mode is really supported.
-
- * netboot/fsys_tftp.c (buf_fill) [TFTP_DEBUG]: Added some debug
- messages.
- (send_rrq) [TFTP_DEBUG]: Likewise.
- (tftp_read) [TFTP_DEBUG]: Likewise.
- (tftp_dir) [TFTP_DEBUG]: Likewise.
- (tftp_close) [TFTP_DEBUG]: Likewise.
- (tftp_read): Call buf_fill with the argument 1 first, if FILEPOS
- has been moved backwards, and use grub_memmove for copying
- SAVED_TP to TP instead of a direct assignment.
- If send_rrq fails, set ERRNUM to ERR_WRITE instead of ERR_READ.
- Check if BUF_READ is zero instead of if BUF_EOF is non-zero at
- the end of the loop.
- (tftp_dir): Set ERRNUM to ERR_WRITE instead of ERR_READ, if
- send_rrq fails.
- Save TP and LEN in SAVED_TP and SAVED_LEN respectively before
- buf_fill instead of after it, because it destroys the contents
- of TP.
- * netboot/main.c (print_network_configuration): The order of the
- arguments for grub_sprintf in the local function sprint_ip_addr
- is reversed.
-
- * configure.in (--enable-packet_retransmission): Renamed to ...
- (--disable-packet-retransmission): ... this. Assume that a
- network is congested by default.
-
-2000-02-11 OKUJI Yoshinori <okuji@gnu.org>
-
- From Pavel Roskin:
- * stage2/shared.h [!GRUB_SHARED_HEADER] (GRUB_SHARED_HEADER):
- Defined.
- [GRUB_SHARED_HEADER]: Don't declare or define anything.
-
- * netboot/main.c (print_network_configuration): New function.
- (await_reply): Check for Control-C instead of ESC, because GRUB
- already uses ESC for another purpose.
- (rfc951_sleep): Check for the key input in the loop. If
- Control-C is pushed, return immediately.
- * netboot/etherboot (print_network_configuration): Declared.
- (CTRL_C): New macro.
- (ESC): Undefined.
- * netboot/config.c (eth_probe): Clear ARPTABLE after clearing
- NETWORK_READY.
- * stage2/builtins.c (bootp_func): Call
- print_network_configuration if bootp succeeds.
- (rarp_func): Call print_network_configuration if rarp succeeds.
-
-2000-02-11 OKUJI Yoshinori <okuji@gnu.org>
-
- From Per Lundberg <plundis@byggdok.se>:
- * docs/multiboot.texi: Added graphics support.
-
-2000-02-10 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/multiboot.texi (Top): Downgrade the version to 0.6.90,
- since we need more work to release it as 0.7.
-
-2000-02-10 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/Makefile.am [NETBOOT_SUPPORT] (STAGE2_COMPILE): Added
- -I$(top_srcdir)/netboot and -DSUPPORT_NETBOOT=1.
- * stage2/builtins.c (bootp_func): New function.
- (dhcp_func): Likewise.
- (rarp_func): Likewise.
- (builtin_bootp): New variable.
- (builtin_dhcp): Likewise.
- (builtin_rarp): Likewise.
- (builtin_table): Added pointers to BUILTIN_BOOTP, BUILTIN_DHCP
- and BUILTIN_RARP.
- * docs/user-ref.texi (General Commands): Added descriptions
- about "bootp", "dhcp" and "rarp".
-
- * netboot/main.c (bootp) [!NO_DHCP_SUPPORT]: Added casts to
- suppress gcc warnings.
- (decode_rfc1533) [!NO_DHCP_SUPPORT]: Likewise.
- * netboot/3c90x.c: Include the local "pci.h" instead of
- <linux/pci.h> even if __FreeBSD__ is undefined.
-
-2000-02-09 OKUJI Yoshinori <okuji@gnu.org>
-
- From Jochen Hoenicke:
- * stage2/fsys_fat.c (fat_create_blocklist): The previous change
- is reversed. Set FIRST_FAT_ENTRY to a unsigned long value in
- FAT_BUF + (NEW_MAPBLOCK - MAPBLOCK) instead of a unsigned short
- value. Mask FIRST_FAT_ENTRY with 0xFFF if FAT_SIZE is equal to
- 3, whether the bit 0 of LAST_FAT_ENTRY is set or not.
-
- * netboot/config.c (eth_probe): If PROBED is set to non-zero,
- return 1 without probing ethernet cards. Clear NETWORK_READY. If
- *T->ETH_PROBE return sucessfully, set PROBED to 1.
- * netboot/main.c (rarp): Call eth_probe and return zero if
- fails. Clear NETWORK_READY at first, and set NETWORK_READY to 1
- if RETRY is less than MAX_ARP_RETRIES. If IP_ABORT is non-zero,
- return zero instead of one.
- (bootp): Call eth_probe and return zero if fails. Clear
- NETWORK_READY at first, and set NETWORK_READY to 1 if
- await_reply returns successfully.
- (bootp) [T509HACK]: If FLAG is non-zero, skip calling
- await_reply. Don't call await_reply here any more.
- (bootp) [!NO_DHCP_SUPPORT]: If any ack packet is not reached
- within MAX_BOOTP_RETRIES times, return zero. If DHCP_REPLY isn't
- DHCPOFFER, set NETWORK_READY to one and return one.
- * netboot/etherboot.h (NO_DHCP_SUPPORT): Undefined.
-
- * stage2/builtins.c (print_root_device): Use the macro
- NETWORK_DRIVE instead of 0x20.
- * stage2/disk_io.c [!STAGE1_5] (sane_partition): Likewise.
- (real_open_partition) [!STAGE1_5]: Likewise.
- (set_device) [!STAGE1_5]: Likewise.
-
-2000-02-08 OKUJI Yoshinori <okuji@gnu.org>
-
- * grub/asmstub.c (biosdisk) [__linux__]: Use _llseek when
- __GLIBC_MINOR__ is less than 1 even if __GLIBC__ is 2. Reported
- by Goran Koruga <goran.koruga@hermes.si>.
-
- * configure.in (--disable-lba-support-bitmap-check): New option.
- Don't define CHECK_LBA_SUPPORT_BITMAP if specified.
- * stage1/stage1.S (real_start): Check if AH=0x42 is supported if
- CHECK_LBA_SUPPORT_BITMAP instead of NO_BUGGY_BIOS_IN_THE_WORLD
- is defined.
- * stage2/bios.c (get_diskinfo): Check if LBA read/write
- functions are supported iff CHECK_LBA_SUPPORT_BITMAP is defined,
- instead of NO_BUGGY_BIOS_IN_THE_WORLD.
-
-2000-02-07 OKUJI Yoshinori <okuji@gnu.org>
-
- The netboot support is heavily rewritten, based on
- Etherboot-4.4.2. The current one doesn't work yet, so check out
- GRUB with the tag "dresden_netboot_code" if you need working
- one.
-
- * configure.in (--enable-tftp): Deleted.
- (FSYS_CFLAGS): `AC_SUBST'ed right before AC_OUTPUT.
- (NETBOOT_DRIVERS): New variable. AC_SUBST this after examining
- the driver options.
- (--enable-packet-retransmission): New option.
- (--enable-pci-direct): Likewise.
- (--enable-3c509): Likewise.
- (--enable-3c529): Likewise.
- (--enable-3c90x): Likewise.
- (--enable-cs89x0): Likewise.
- (--enable-epic100): Likewise.
- (--enable-3c507): Likewise.
- (--enable-exos205): Likewise.
- (--enable-ni5210): Likewise.
- (--enable-lancepci): Likewise.
- (--enable-ne2100): Likewise.
- (--enable-ni6510): Likewise.
- (--enable-3c503): Likewise.
- (--enable-ntulip): Likewise.
- (--enable-rtl8139): Likewise.
- (--enable-sk-g16): Likewise.
- (--enable-smc9000): Likewise.
- (--enable-tiara): Likewise.
- (--enable-tulip): Likewise.
- (--enable-via-rhine): Likewise.
- (--enable-3c503-shmem): Likewise.
- (--enable-3c503-aui): Likewise.
- (--enable-3c509-hack): Likewise.
- (--enable-compex-rl2000-fix): Likewise.
- (--enable-smc9000-scan): Likewise.
- (--enable-t503): Deleted.
- (--enable-lance): Likewise.
- (--enable-cs): Likewise.
-
- * netboot/main.c: New file. Copied and modified.
- * netboot/linux-asm-io.h: Likewise.
- * netboot/etherboot.h: Likewise.
- * netboot/misc.c: Likewise.
- * netboot/via-rhine.c: Likewise.
- * netboot/3c90x.c: Likewise.
- * netboot/3c90x.txt: Likewise.
- * netboot/epic100.c: Likewise.
- * netboot/epic100.h: Likewise.
- * netboot/i82586.c: Likewise.
- * netboot/linux-asm-string.h: Likewise.
- * netboot/ntulip.c: Likewise.
- * netboot/ntulip.txt: Likewise.
- * netboot/osdep.h: Likewise.
- * netboot/rtl8139.c: Likewise.
- * netboot/sk_g16.c: Likewise.
- * netboot/sk_g16.h: Likewise.
- * netboot/smc9000.c: Likewise.
- * netboot/smc9000.h: Likewise.
- * netboot/tiara.c: Likewise.
- * netboot/tulip.c: Likewise.
- * netboot/tulip.h: Likewise.
- * netboot/README.netboot: New file. Most information is stolen
- from Makefile and Config.32 in Etherboot.
- * netboot/3c509.c: Copied from Etherboot. The original is
- removed.
- * netboot/3c509.h: Likewise.
- * netboot/cs89x0.c: Likewise.
- * netboot/eepro100.c: Likewise.
- * netboot/lance.c: Likewise.
- * netboot/ns8390.c: Likewise.
- * netboot/ns8390.h: Likewise.
- * netboot/pci.c: Likewise.
-
- * netboot/3c59x.c: Include etherboot.h instead netboot.h.
- * netboot/config.c: Copied from Etherboot and added the 3c59x
- entries.
- * netboot/pci.h: Likewise.
- * netboot/fsys_tftp.c: Entirely rewritten based on main.c in
- Etherboot.
-
- * netboot/io.h: Removed.
- * netboot/ip.h: Likewise.
- * netboot/ip.c: Likewise.
- * netboot/netboot.h: Likewise.
-
- * netboot/Makefile.am (INCLUDES): Added -I$(top_srcdir)/stage2.
- (DRIVERS): Removed.
- (libdrivers_a_SOURCES): Added etherboot.h, linux-asm-io.h,
- linux-asm-string.h, main.c, misc.c and osdep.h. Deleted io.h,
- ip.h, ip.c, netboot.h and $(DRIVERS).
- (EXTRA_libdrivers_a_SOURCES): New variable.
- (libdrivers_a_LIBADD): Set to @NETBOOT_DRIVERS@.
- (libdrivers_a_DEPENDENCIES): New variable.
- (EXTRA_DIST): Likewise.
- (3c509_drivers): New variable. Define a new rule for the value.
- (3c59x_drivers): Likewise.
- (3c90x_drivers): Likewise.
- (cs89x0_drivers): Likewise.
- (eepro100_drivers): Likewise.
- (epic100_drivers): Likewise.
- (i82586_drivers): Likewise.
- (lance_drivers): Likewise.
- (ns8390_drivers): Likewise.
- (ntulip_drivers): Likewise.
- (rtl8139_drivers): Likewise.
- (sk_g16_drivers): Likewise.
- (smc9000_drivers): Likewise.
- (tiara_drivers): Likewise.
- (tulip_drivers): Likewise.
- (via_rhine_drivers): Likewise.
- (t503_o_CFLAGS): Removed.
- (nepci_o_CFLAGS): Set to -DINCLUDE_NEPCI=1.
- (ne_o_CFLAGS): Set to -DINCLUDE_NE=1.
- (wd_o_CFLAGS): Set to -DINCLUDE_WD=1.
- (3c509_o_CFLAGS): Likewise.
- (3c529_o_CFLAGS): Likewise.
- (3c59x_o_CFLAGS): Likewise.
- (3c90x_o_CFLAGS): Likewise.
- (cs89x0_o_CFLAGS): Likewise.
- (eepro100_o_CFLAGS): Likewise.
- (epic100_o_CFLAGS): Likewise.
- (3c507_o_CFLAGS): Likewise.
- (exos205_o_CFLAGS): Likewise.
- (ni5210_o_CFLAGS): Likewise.
- (lancepci_o_CFLAGS): Likewise.
- (ne2100_o_CFLAGS): Likewise.
- (ni6510_o_CFLAGS): Likewise.
- (3c503_o_CFLAGS): Likewise.
- (ntulip_o_CFLAGS): Likewise.
- (rtl8139_o_CFLAGS): Likewise.
- (sk_g16_o_CFLAGS): Likewise.
- (smc9000_o_CFLAGS): Likewise.
- (tiara_o_CFLAGS): Likewise.
- (tulip_o_CFLAGS): Likewise.
- (via_rhine_o_CFLAGS): Likewise.
-
- * stage2/char_io.c (nul_terminate): Changed the type of the
- return value to int. Return the original character changed to
- NUL.
- * stage2/shared.h (NETWORK_DRIVE): New macro.
- (nul_terminate): Adjusted to the definition.
- * stage2/gunzip.c (gunzip_test_header): Removed the TFTP check
- entirely. It is no longer necessary because we now can obtain
- the correct size of a file even for TFTP.
-
-2000-02-07 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/asm.S: Undo the previous changes. Is
- binutils-2.9.5.0.25 too strict to retain the compatibility?
- Reported by Kalle Olavi Niemitalo <tosi@ees2.oulu.fi>.
-
-2000-02-03 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/cmdline.c (enter_cmdline): Set BUF_DRIVE to -1 before
- running a command to invalidate the cache.
- (run_script): Likewise.
- * stage2/char_io.c (get_cmdline): Set BUF_DRIVE to -1 before the
- completion to invalidate the cache.
- Reported by Jeff Sheinberg <jeffsh@erols.com>.
-
- * configure.in: Use AC_PATH_TOOL instead of AC_PATH_PROG.
- * stage2/asm.S (chain_stage1): Prepend `*' to the argument for
- ljmp.
- (chain_stage2): Likewise.
- (big_linux_boot): Likewise.
-
-2000-01-19 OKUJI Yoshinori <okuji@gnu.org>
-
- * util/grub-install.in (--root): Renamed to ...
- (--root-directory): ... this, since "root" is vague.
- * docs/user-ref.texi (Invoking grub-install): Adjusted to the
- change above, and added an example how to use --root-directory.
- * docs/grub-install.8: Regenerated.
-
- * docs/appendices.texi (FAQ): Added an item about the sucked
- SCSI problem.
-
-2000-01-15 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (chainloader_func): If --force is specified
- in ARG, don't check for the signature.
- * docs/tutorial.texi (Chain-loading): Added a caution about some
- defective boot loaders and --force.
- * docs/user-ref.texi (Command-line-specific commands): Added a
- description about --force.
-
-2000-01-11 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/prog-ref.texi (LBA mode disk I/O): Added a footnote about
- a buggy BIOS.
-
-2000-01-11 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage1/stage1.S [!NO_BUGGY_BIOS_IN_THE_WORLD]: Don't check if
- LBA read is supported. Anyway, fallback to the CHS mode if
- fails.
-
-2000-01-10 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/bios.c (NO_INT13_FALLBACK): Undefined.
- (get_diskinfo) [!NO_BUGGY_BIOS_IN_THE_WORLD]: Do not check if
- bit 0 in DRP.FLAGS is set, because at least one BIOS does not
- set it correctly. Reported by "Forever shall I be."
- <zinx@linuxfreak.com>.
-
- * util/grub-install.in: Handle the new options `--root' and
- `--grub-shell'.
- (rootdir): New variable.
- (usage): Print the help messages about the options --root and
- --grub-shell.
- (bootdir): Initialized after the option analysis.
- (grubdir): Likewise.
- (device_map): Likewise.
- (root_device): Set to the result for the directory ROOTDIR
- instead of "/".
- * docs/user-ref.texi (Invoking grub-install): Added the
- descriptions about --root and --grub-shell.
- * docs/grub-install.8: Regenerated.
-
-2000-01-08 OKUJI Yoshinori <okuji@gnu.org>
-
- * util/grub-install.in (grubdir_device): New variable.
- If GRUBDIR_DEVICE is not equal to ROOT_DEVICE, print an error
- message and exit.
- * README: Added a caution about Automake.
- * TODO: Updated. Only the things that should be done until 0.6
- have one or more exclamations. Things with zero exclamation
- will be done after 0.6 unless someone sends a patch for it.
-
-2000-01-05 OKUJI Yoshinori <okuji@gnu.org>
-
- * grub/asmstub.c: Include the header shared.h after including
- all the system headers, but not before.
- (EXTENDED_MEMSIZE): Reduced to 3MB.
- (grub_setjmp): New function.
- (grub_longjmp): Likewise.
- * grub/main.c: Include setjmp.h.
- * stage2/asm.S (grub_setjmp): New function. Stolen from the
- OSKit (which stole it from Mach).
- (grub_longjmp): Likewise.
- * stage2/shared.h [GRUB_UTIL] (grub_jmp_buf): New type.
- [!GRUB_UTIL] (grub_jmp_buf): New macro. Defined as jmp_buf.
- (grub_setjmp): Declared.
- (grub_longjmp): Likewise.
- (restart_env): Likewise.
- * stage2/builtins.c (configfile_func): Use grub_longjmp instead
- of invoking cmain again.
- * stage2/stage2.c (restart_env): New variable.
- (cmain): Call grub_setjmp first to initialize RESTART_ENV.
-
-2000-01-03 OKUJI Yoshinori <okuji@gnu.org>
-
- * docs/multiboot.texi (Boot information format): Added the
- descriptions about the fields "config_table" and
- "boot_loader_name".
-
-1999-12-31 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (setup_func) [!NO_BUGGY_BIOS_IN_THE_WORLD]:
- Specify the option `d', whether INSTALL_DRIVE is identical with
- IMAGE_DRIVE or not.
- * docs/user-ref.texi (Command-line-specific commands): Added a
- caution about buggy BIOSes which don't pass a booting drive
- properly.
-
- * docs/src2texi: Added an extra space into the first line, for
- the portability issue.
-
- * docs/appendices.texi (Obtaining and Building GRUB): Update the
- information on the ftp site and the CVS repository.
-
-1999-12-30 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/builtins.c (blocklist_func): New function.
- (builtin_blocklist): New variable.
- (builtin_table): Added a pointer to BUILTIN_BLOCKLIST.
- * docs/user-ref.texi (Command-line-specific commands): Added a
- description about the command "blocklist".
-
-1999-12-30 OKUJI Yoshinori <okuji@gnu.org>
-
- * stage2/disk_io.c (grub_seek): New function.
- * stage2/shared.h (grub_seek): Declared.
- * stage2/boot.c (load_image): Use grub_seek instead of setting
- FILEPOS to a new value directly.
- * stage2/builtins.c (install_func): Likewise.
- (testload_func): Likewise.
-
- * docs/grub.texi: Use a single direntry command for all the
- entries instead of one per entry.
-
-1999-12-29 OKUJI Yoshinori <okuji@gnu.org>
-
- * grub/asmstub.c (check_device) [__linux__]: Check if DEVICE is
- a CD-ROM drive by the HDIO_GETGEO ioctl. If so, then return
- zero. Reported by Pavel Roskin.
-
- * stage2/Makefile.am (nodist_noinst_DATA): Renamed to ...
- (noinst_DATA): ... this. The primary DATA is `nodist' by
- default, at least theoretically. Reported by Klaus Reichl.
-
- * stage2/bios.c (get_diskinfo): Set the LBA flag in GEOMETRY
- only if bit 0 in DRP.FLAGS is set. Reported by Zack Weinberg
- <zack@rabi.columbia.edu>.
-
- From Pavel Roskin:
- * grub/asmstub.c (init_device_map): Increase the number of
- devices to be probed to 8 for IDE disks and 16 for SCSI
- disks. Reported by Anton Anisimov <aa@bestlinux.net>.
-
-1999-12-06 Gordon Matzigkeit <gord@fig.org>
-
- * README (DEVELOPERS): Change CVS location to subversions.
-
-1999-11-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/disk_io.c (real_open_partition): If SLICE_NO is greater
- than or equal to PC_SLICE_MAX, skip any extended partition, when
- searching for the right partition. Reported by Weil, Stefan 3732
- EPE-24 <Stefan.Weil@de.heidelberg.com>.
-
-1999-11-19 Gordon Matzigkeit <gord@fig.org>
-
- * grub/asmstub.c (getkey): Stop immediately if we get an EOF.
-
- * stage2/stage2.c (cmain): Tell enter_cmdline to run forever.
- (run_menu): Tell print_cmdline_message and enter_cmdline that we
- won't run forever.
- * stage2/cmdline.c (enter_cmdline): New argument, FOREVER, for
- when ESC shouldn't allow an exit. Pass it to
- print_cmdline_message.
- (print_cmdline_message): Use new argument, FOREVER, to decide
- whether to tell the user that ESC exits.
-
-1999-11-18 Gordon Matzigkeit <gord@fig.org>
-
- * debian/rules (binary-arch): Don't strip or generate shared
- library dependencies for /usr/sbin/grub-install, since it's a
- script.
-
- * util/grub-install.in: Create safe temporary log files using
- /bin/tempfile if it is executable.
-
-1999-11-17 Gordon Matzigkeit <gord@fig.org>
-
- * stage1/Makefile.am (LDFLAGS): Consolidate multiple -Wl flags.
- * stage2/Makefile.am (PRE_STAGE2_LINK): Likewise.
- (START_LINK): Likewise.
- (STAGE1_5_LINK): Likewise.
-
-1999-11-19 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * util/grub-install.in (debug): New variable.
- (convert): If the device file does not exist, then emit an
- error. Get the GRUB drive instead of the OS device.
- If --debug is specified, then set $debug to yes.
- If $debug is yes, run "set -x".
- Make sure that stage1 and stage2 exist.
- When checking for INSTALL_DEVICE, use "case" instead of "elif"s.
- Make sure that $install_drive is not empty.
- Likewise, make sure that $root_drive is not empty.
- Any error message is redirected to the standard error.
-
-1999-11-19 Pavel Roskin <pavel_roskin@geocities.com>
-
- * stage2/Makefile.am (noinst_DATA): Renamed to ...
- (nodist_noinst_DATA): ... this.
- * util/Makefile.am: sbin_SCRIPS -> sbin_SCRIPTS.
- * util/grub-install.in: grub_dir -> grubdir.
- Check if $grub_shell exists before running it.
- (convert): Added a missing "test" after "if".
-
-1999-11-18 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * configure.in: Output grub-install.
- * util/Makefile.am (sbin_SCRIPTS): New variable.
- * util/grub-install.in: New file.
- * docs/Makefile.am (man_MANS): Added grub-install.8.
- [MAINTAINER_MODE] ($(srcdir)/grub-install.8): New target.
- * docs/grub-install.8: New file. Generated by help2man.
- * docs/user-ref.texi (Invoking grub-install): New chapter.
-
-1999-11-16 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Pavel Roskin:
- * stage1/stage1.S: Check for the API subset support bitmap
- returned by INT 13 AH=48h, and jump to chs_mode if AH=42h is not
- supported.
-
-1999-11-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (install_func): When using a Stage 1.5, set
- CURRENT_DRIVE to SAVED_DRIVE and CURRENT_PARTITION to
- SAVED_PARTITION if set_device fails. If CURRENT_DRIVE is equal
- to SRC_DRIVE, then set CURRENT_DRIVE to 0xFF. We don't want to
- embed any drive number whenever possible.
- * stage2/disk_io.c (set_device) [STAGE1_5]: Always set
- CURRENT_PARTITION to PARTITION.
-
-1999-11-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Pavel Roskin:
- * stage1/stage1.S (lba_mode): Jump to chs_mode if INT 13 AH=42h
- fails.
-
-1999-11-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Do not use the device map file unless --device-map is specified.
-
- * grub/main.c (device_map_file): Set to 0.
- (default_device_map_file): Removed.
- (usage): Do not print DEFAULT_DEVICE_MAP_FILE.
- * grub/asmstub.c (init_device_map): If DEVICE_MAP_FILE is NULL,
- do not try to open the device map file.
- Set FP to NULL by default.
- * docs/grub.8: Regenerated.
-
-1999-11-11 Michael Hohmuth <hohmuth@innocent.com>
-
- * stage2/boot.c (load_image): grub_close was called after
- return, so exchange the order.
- * stage2/stage1_5.c (cmain): Call grub_close after grub_read.
- Set RET to the value returned by grub_read, and if RET is
- non-zero, call chain_stage2.
- * stage1/Makefile.am (BUILT_SOURCES): Removed.
- (CLEANFILES): Set to $(nodist_pkgdata_DATA).
-
-1999-11-11 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Suggested by Klaus Reichl:
- * stage2/builtins.c (print_root_device): New function.
- (root_func): If no argument is specified, call the function
- print_root_device and return.
- (rootnoverify_func): Likewise.
- * stage2/disk_io.c [!STAGE1_5] (print_completions): Call
- print_error even if IS_FILENAME is zero.
- If ERRNUM is non-zero, then return -1.
- * stage2/char_io.c [!STAGE1_5] (get_cmdline): Clear ERRNUM after
- calling print_completions to print the list as well.
-
- * stage2/asm.S [!STAGE1_5] (currticks): Set %eax to %cx:%dx
- correctly. Reported by Michael Hohmuth.
-
-1999-11-06 Klaus Reichl <Klaus.Reichl@alcatel.at>
-
- * grub/asmstub.c (get_diskinfo) [__linux__]: After opening the
- drive, flush the cache, other progs may have left over something
- in the cache.
-
-1999-11-03 Gordon Matzigkeit <gord@fig.org>
-
- * debian/rules: Add variables for cross-compilation.
-
- * debian/control (Standards-Version): Update to version 3.1.0.
- * debian/rules (build): Install manpages into /usr/share/man, and
- info into /usr/share/info in accordance with FHS.
- (binary-arch): Likewise, and put docs into /usr/share/doc.
- * debian/postinst: Use /usr/share/info, and manage compatibility
- /usr/doc/grub -> /usr/share/doc/grub symlink.
- * debian/prerm: Likewise.
-
- * stage2/Makefile.am (CLEANFILES): Change to
- $(nodist_pkgdata_DATA) so that the raw binary files are deleted.
- * stage1/Makefile.am (CLEANFILES): Likewise.
-
-1999-11-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/asmstub.c (grub_putchar) [HAVE_LIBCURSES]: Do not call
- wrefresh. This was just an accident. Sorry.
-
- Reported by Alan McLean <amcl@flash.net>:
- * stage2/builtins.c (embed_func): The sector argument for the
- function biosdisk is changed from SECTOR + I * SECTOR_SIZE to
- SECTOR + I.
- (find_func): Clear ERRNUM before each of the attempts.
-
-1999-11-05 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/multiboot.texi (Boot information format): Add the members
- `drives_addr' and `drives_count' into the Multiboot information
- structure, and added the descriptions.
-
-1999-11-03 Gordon Matzigkeit <gord@fig.org>
-
- * util/mbchk.c (main): Move the version number inside the
- parentheses since it is the GRUB package version, not just an
- mbchk-specific version.
-
-1999-10-30 Gordon Matzigkeit <gord@fig.org>
-
- * debian/rules (binary-arch): Compress man pages.
- Strip the grub shell.
- Install examples.
-
-1999-11-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/tutorial.texi: Fix typos by ispell.
- * docs/user-ref.texi: Likewise.
- * docs/prog-ref.texi: Likewise.
- * docs/appendices.texi: Likewise.
-
-1999-11-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/fsys_ext2fs.c (struct ext2_dir_entry): Changed the type
- of `name_len' to __u8 and added the new member `file_type' after
- it. This is stolen from linux/ext2_fs.h in Linux 2.2.13.
- Reported by Ben Harris <bjh21@cam.ac.uk>.
-
- * stage2/builtins.c (device_func) [GRUB_UTIL]: Call
- nul_terminate before calling check_device.
-
-1999-11-02 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/disk_io.c (real_open_partition): Check for the right
- partition for any extended partition as well. Set EXT to I after
- the check is done. Reported by Jeff Scheinberg
- <jeffsh@erols.com>.
-
- * stage2/builtins.c (color_func): Use the function
- nul_terminate.
- (device_func) [GRUB_UTIL]: Likewise.
- (help_func): Likewise.
- (install_func): Save CURRENT_DRIVE, CURRENT_PARTITION and
- BUG_GEOM in SRC_DRIVE, SRC_PARTITION and SRC_GEOM respectively,
- and use them when patching the Stage 2.
- NUL-terminate the configuration filename CONFIG_FILENAME.
- If IS_STAGE1_5 is true, then check if the "real config file"
- option is present, and, if so, patch the Stage 2 CONFIG_FILENAME
- with the configuration filename REAL_CONFIG_FILENAME.
- (setkey_func): Use nul_terminate instead of the local function
- null_terminate.
- * stage2/char_io.c [!STAGE1_5] (nul_terminate): New function.
- * stage2/shared.h (nul_terminate): Declared.
-
-1999-11-01 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/grub.texi: Add "I/O ports detection" into the menu.
- * docs/user-ref.texi: Added a description about the command
- "ioprobe".
- * docs/prog-ref.texi (I/O ports detection): New chapter.
-
-1999-11-01 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Pavel Roskin:
- * stage2/asm.S (int1_handler): Use EXT_C(io_map) instead of
- io_map.
- (int1_handler): Use EXT_C(bios_key_map) instead of bios_key_map.
- * grub/asmstub.c [__OpenBSD__]: Include <sys/ioctl.h> and
- <sys/disklabel.h>.
- [__OpenBSD__] (get_floppy_disk_name): Added support for OpenBSD.
- [__OpenBSD__] (get_ide_disk_name): Likewise.
- [__OpenBSD__] (get_scsi_disk_name): Likewise.
- (get_drive_geometry) [__OpenBSD__]: Use for OpenBSD the same
- ioctl as for NetBSD and FreeBSD.
-
-1999-10-31 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/asmstub.c (init_device_map): Add a floppy device name
- into the device map file even if check_device fails.
- * stage2/char_io.c [!STAGE1_5] (get_cmdline): Clear ERRNUM after
- calling print_completions.
-
-1999-10-29 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/asm.S (track_int13): Defined unconditionally. Do not
- use int3 any more, but replace the int13 handler with
- set_tf_int13_handler.
- (int1_handler): Defined unconditionally. Do not check for 0x0F.
- Add missing `$'s. If the code is 0xEC-0xEF, use %dx instead of
- immediate. If the code is 0xE4-0xE7, use immediate instead of
- %dx. Set %ds to zero before scanning IO_MAP. Check for the
- buffer overrun of IO_MAP before adding a port.
- [!DEFINE_TRACK_INT13] (int13_first_instruction): Removed.
- [!DEFINE_TRACK_INT13] (int3_handler): Likewise.
- (set_tf_int13_handler): New interrupt handler.
- (set_tf_int13_offset): New variable.
- (set_tf_int13_segment): Likewise.
- * stage2/builtins.c (ioprobe_func): New function.
- (builtin_ioprobe): New variable.
- (builtin_table): Added a pointer to BUILTIN_IOPROBE.
- * stage2/shared.h (IO_MAP_SIZE): New macro.
- (track_int13): Declared.
- (io_map): Likewise.
-
-1999-10-29 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/char_io.c (print_error) [!STAGE1_5]: Print "Error:"
- before print the error message.
- (print_error): Do not clear ERRNUM.
- * stage2/cmdline.c (run_script): If ERRNUM is non-zero, set
- ERRNUM to ERR_NONE.
- (enter_cmdline): Clear ERRNUM after print_error.
-
-1999-10-28 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Pavel Roskin:
- * stage2/stage2.c (run_menu) [GRUB_UTIL]: Do not use IBM special
- characters in the message, but use ascii names instead.
- (run_menu) [!GRUB_UTIL]: Use DISP_UP and DISP_DOWN instead of
- the ascii codes.
- * stage2/shared.h [!ACS_ULCORNER] (ACS_ULCORNER): New macro.
- [!ACS_ULCORNER] (ACS_URCORNER): Likewise.
- [!ACS_ULCORNER] (ACS_LLCORNER): Likewise.
- [!ACS_ULCORNER] (ACS_LRCORNER): Likewise.
- [!ACS_ULCORNER] (ACS_HLINE): Likewise.
- [!ACS_ULCORNER] (ACS_VLINE): Likewise.
- [!ACS_ULCORNER] (ACS_LARROW): Likewise.
- [!ACS_ULCORNER] (ACS_RARROW): Likewise.
- [!ACS_ULCORNER] (ACS_UARROW): Likewise.
- [!ACS_ULCORNER] (ACS_DARROW): Likewise.
- [GRUB_UTIL] (DISP_UL): Set to ACS_ULCORNER.
- [GRUB_UTIL] (DISP_UR): Set to ACS_URCORNER.
- [GRUB_UTIL] (DISP_LL): Set to ACS_LLCORNER.
- [GRUB_UTIL] (DISP_LR): Set to ACS_LRCORNER.
- [GRUB_UTIL] (DISP_HORIZ): Set to ACS_HLINE.
- [GRUB_UTIL] (DISP_VERT): Set to ACS_VLINE.
- [GRUB_UTIL] (DISP_LEFT): Set to ACS_LARROW.
- [GRUB_UTIL] (DISP_RIGHT): Set to ACS_RARROW.
- [GRUB_UTIL] (DISP_UP): Set to ACS_UARROW.
- [GRUB_UTIL] (DISP_DOWN): Set to ACS_DARROW.
-
-1999-10-28 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (keycode_func): Removed.
- (builtin_keycode): Likewise.
- (struct keysym): New structure.
- (keysym_table): New variable.
- (setkey_func): New function.
- (builtin_setkey): New variable.
- (builtin_table): Removed the pointer to BUILTIN_KEYCODE, and
- added a pointer to BUILTIN_SETKEY.
- * stage2/common.c [!STAGE1_5] (err_list): Added
- ERR_BAD_ARGUMENT.
- * stage2/shared.h (grub_error_t): Added ERR_BAD_ARGUMENT.
- (KEY_MAP_SIZE): Set to 128.
- (ascii_key_map): Declared.
- * stage2/asm.S [!STAGE1_5] (remap_ascii_char): New function.
- [!STAGE1_5] (ascii_key_map): New variable.
- [!STAGE1_5] (getkey): Call remap_ascii_char after int16.
- [!STAGE1_5] (checkkey): Likewise.
- * grub/asmstub.c (ascii_key_map): New variable.
- * docs/user-ref.texi (General commands): Added a description
- about the command "setkey".
- (Stage2 errors): Added a description about ERR_BAD_ARGUMENT.
-
-1999-10-27 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/disk_io.c (set_device) [!STAGE1_5]: Remove the
- preliminary Mach-style device name support. I've decided that
- the support is not necessary.
- (setup_part) [!STAGE1_5]: Do not strip the leading "/dev/".
- * docs/help2man: Upgraded to 1.016.
- * docs/mbchk.1: Regenerated.
- * docs/grub.8: Likewise.
- * grub/asmstub.c: Rename KEY_MAP to BIOS_KEY_MAP.
-
- * stage2/asm.S [!STAGE1_5] (set_int15_handler): Use 0 instead of
- the maximum number for the segment.
- [!STAGE1_5] (unset_int15_handler): Likewise.
- [!STAGE1_5] (int15_handler): Almost rewritten. If non-carrier,
- ignore the scancode. If the scancode is E1 or E0, then set
- INT15_SKIP_FLAG to 0x74, and if the previous scancode is E1 or
- E0, set INT15_SKIP_FLAG to 0xea. Clear bit 7 in %dl. Save bit 7
- of %al in %bl. Do not lcall. Use ljmp instead.
- [!STAGE1_5] (key_map): Renamed to ...
- [!STAGE1_5] (bios_key_map): ... this.
- * stage2/builtins.c (keycode_func): Check if FROM is greater
- than 0xff instead of double-checking for TO. Use BIOS_KEY_MAP
- instead of KEY_MAP.
- * stage2/shared.h (KEY_MAP_SIZE): Set to 32.
- (key_map): Removed.
- (bios_key_map): Declared.
-
-1999-10-26 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Now the BIOS drive remapping is functional.
-
- * stage2/asm.S [DEFINE_TRACK_INT13] (track_int13): Use %edi
- instead of direct addresses.
- Prefix DATA32 to the calls for real_to_prot and prot_to_real.
- Fix the address of DRIVE: 4(%ebp) -> 8(%ebp).
- (set_int15_handler): Use %edi instead of direct addresses.
- (unset_int15_handler): Likewise.
- (set_int13_handler): Copy DRIVE_MAP_SIZE * 2 bytes instead of
- DRIVE_MAP_SIZE bytes of MAP.
- Fix the address of MAP: 4(%ebp) -> 8(%ebp).
- Use %edi instead of direct addresses.
- (int13_handler): Do not set %ds to %cs. Use the segment override
- prefix of %cs instead.
- Push the flags pushed by the callee instead of the current.
- Set the flags in the stack to the flags returned by the original
- int13 call.
- (drive_map): 4bytes-aligned.
- * stage2/disk_io.c (grub_close): Do not set ERRNUM even if
- FSYS_TYPE is NUM_FSYS.
-
-1999-10-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage1/stage1.S: Long jump to real_start, because some bogus
- BIOSes jump to 07C0:0000 instead of 0000:7C00.
- (real_start): New label.
- * docs/Makefile.am (grub.info): Removed. Use the default rule
- instead.
-
-1999-10-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/asm.S [DEFINE_TRACK_INT13] (int3_handler): Save the
- modified FLAGS in 6(%bp) instead of 4(%bp).
- Decrease %bx before restoring the first instruction.
- [DEFINE_TRACK_INT13] (track_int13): Go to the real mode before
- setting up the registers for the int13 call.
-
-1999-10-24 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Add the prototype of a function to probe I/O ports used for a
- BIOS drive.
-
- * stage2/asm.S [DEFINE_TRACK_INT13] (track_int13): New function.
- [DEFINE_TRACK_INT13] (int1_handler): New interrupt handler for
- the real mode.
- [DEFINE_TRACK_INT13] (int3_handler): Likewise.
- [DEFINE_TRACK_INT13] (io_map): New variable.
-
- * stage2/builtins.c (quit_func) [!GRUB_UTIL]: Fix a typo.
-
-1999-10-24 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- The new GRUB manual becomes official.
-
- * docs/grub.texi: Replaced with new-grub.texi.
- * docs/new-grub.texi: Removed.
- * docs/Makefile.am (grub_TEXINFOS): New variable.
- (UNFINISHED_MANUALS): Removed.
- (EXTRA_DIST): Deleted $(UNFINISHED_MANUALS).
-
-1999-10-24 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (device_func) [!GRUB_UTIL]: Set ERRNUM to
- ERR_UNRECOGINIZED and return 1.
- (impsprobe_func) [GRUB_UTIL]: Likewise.
- (quit_func) [!GRUB_UTIL]: Likewise.
- * docs/tutorial.texi: Rename "Device Syntax" to "Filename".
- Added many cross-references.
- * docs/new-grub.texi: "Device Syntax" -> "Filename".
- * docs/user-ref.texi: Fix typos and added some cross-references.
- * docs/prog-ref.texi: Likewise.
- * docs/appendices.texi: Likewise.
-
-1999-10-23 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (map_func): If BIOS_DRIVE_MAP already
- contains FROM, override the existsing entry.
- If TO is equal to FROM, delete the existing entry if any.
- (keycode_func): Likewise.
- * docs/user-ref.texi (Command): Use the list of `@deffn's
- instead of @table.
- (Basic usage): Use @option instead of @code.
- (Invoking mbchk): Likewise.
-
-1999-10-23 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/asm.S [!STAGE1_5] (set_int15_handler): New function.
- [!STAGE1_5] (unset_int15_handler): Likewise.
- [!STAGE1_5] (int15_handler): New interrupt handler for the real
- mode.
- [!STAGE1_5] (int15_offset): New variable.
- [!STAGE1_5] (int15_segment): Likewise.
- [!STAGE1_5] (key_map): Likewise.
- [!STAGE1_5] (set_int13_handler): Use the macro ABS for
- INT13_OFFSET and INT13_SEGMENT.
- * stage2/shared.h (KEY_MAP_SIZE): New macro.
- (set_int15_handler): Declared.
- (unset_int15_handler): Likewise.
- * stage2/builtins.c (boot_func): Do not allow I to be equal to
- DRIVE_MAP_SIZE.
- Call unset_int15_handler unless KERNEL_TYPE is KERNEL_TYPE_NONE.
- (map_func): Search for an empty slot till I is less than
- DRIVE_MAP_SIZE.
- Check if I is equal to DRIVE_MAP_SIZE instead of if I is greater
- than DRIVE_MAP_SIZE.
- (keycode_func): New function.
- (builtin_keycode): New variable.
- (builtin_table): Added a pointer to BUILTIN_KEYCODE.
- * grub/asmstub.c (set_int15_handler): New function.
- (unset_int15_handler): Likewise.
- (key_map): New variable.
-
-1999-10-23 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Michael Hohmuth <hohmuth@innocent.com>:
- * acconfig.h (HAVE_USCORE_USCORE_BSS_START_SYMBOL): Added the
- `undef' entry.
- (HAVE_EDATA_SYMBOL): Likewise.
- (HAVE_USCORE_EDATA_SYMBOL): Likewise.
- * acinclude.m4 (grub_CHECK_USCORE_USCORE_BSS_START_SYMBOL): New
- function.
- (grub_CHECK_EDATA_SYMBOL): Likewise.
- (grub_CHECK_USCORE_EDATA_SYMBOL): Likewise.
- * configure.in: Check for __bss, edata and _edata.
- * netboot/Makefile.am (DRIVERS): Deleted ns8390.c and ns8390.h.
- (libdrivers_a_LIBADD): New variable.
- ($(libdrivers_a_LIBADD)): New target.
- (nepci_o_CFLAGS): New variable.
- (ne_o_CFLAGS): Likewise.
- (wd_o_CFLAGS): Likewise.
- (t503_o_CFLAGS): Likewise.
- * netboot/fsys_tftp.c (tftp_close): New function.
- * stage2/boot.c (load_image): Call grub_close before return.
- (load_initrd): Likewise.
- (load_module): Likewise.
- * stage2/builtins.c (cat_func): Likewise.
- (chainloader_func): Likewise.
- (configfile_func): Likewise.
- (embed_func): Likewise.
- (find_func): Likewise.
- (install_func): Set IS_OPEN to the value returned by grub_open.
- If IS_OPEN is non-zero, call grub_close before return.
- (setup_func): Call grub_close after grub_open.
- (testload): Call grub_close before return.
- * stage2/disk_io.c (fsys_table): Add the `close' member into
- each of the entries. For TFTP, tftp_close is added, and for the
- rest, NULL is added.
- (grub_read): "|" -> "||".
- (grub_close): New function.
- * stage2/filesys.h [FSYS_TFTP] (tftp_close): Declared.
- (struct fsys_entry): Added close_func.
- * stage2/shared.h (grub_close): Declared.
- * stage2/stage1_5.c (cmain): Call grub_close after grub_open.
- * stage2/stage2.c (cmain): Clear ERRNUM after calling
- find_command to just ignore the error code.
- Call grub_close after loading the configuration file.
-
- * stage2/asm.S (main): Clean out the bss.
-
-1999-10-23 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/new-grub.texi: Updated.
- * docs/user-ref.texi: Likewise.
- * docs/tutorial.texi: Likewise.
- * docs/prog-ref.texi: Likewise.
- * docs/appendices.texi: Likewise.
-
-1999-10-22 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/prog-ref.texi: New file.
- * docs/appendices.texi: Likewise.
- * docs/Makefile.am (UNFINISHED_MANUALS): Added prog-ref.texi and
- appendices.texi.
-
-1999-10-22 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/user-ref.texi: New file.
- * docs/Makefile.am (UNFINISHED_MANUALS): Added user-red.texi.
-
-1999-10-21 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Add BIOS drive remapping support for chain-loading some foolish
- operating systems.
-
- * stage2/builtins.c (bios_drive_map): New variable.
- (boot_func): If KERNEL_TYPE is KERNEL_TYPE_CHAINLOADER, check
- if BIOS_DRIVE_MAP contains meaningful values. If so, search for
- SAVED_DRIVE in BIOS_DRIVE_MAP and exchange SAVED_DRIVE with the
- mapped drive if found. And then call set_int13_handler.
- (map_func): New function.
- (builtin_map): New variable.
- (builtin_table): Added a pointer to BUILTIN_MAP.
- * stage2/asm.S (ABS): New macro.
- [!STAGE1_5] (set_int13_handler): New function.
- [!STAGE1_5] (int13_handler): New interrupt handler for the real
- mode.
- [!STAGE1_5] (drive_map): New variable.
- [!STAGE1_5] (int13_handler_end): New label used for just
- computing the end address of int13_handler.
- * stage2/shared.h (DRIVE_MAP_SIZE): New macro.
- (set_int13_handler): Declared.
- * grub/asmstub.c (set_int13_handler): New function. Do nothing.
-
-1999-10-20 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (find_func): Print only the device names.
- * docs/tutorial.texi: New file.
- * docs/Makefile.am (UNFINISHED_MANUALS): Added tutorial.texi.
- (%.c.texi): Use $(SHELL) instead of /bin/sh.
- (%.h.texi): Likewise.
- (%.S.texi): Likewise.
-
-1999-10-20 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/char_io.c (memcheck): Fix the checks: "<=" -> "<".
- Reported by Mike Hicks <hick0088@umn.edu>.
-
-1999-10-19 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (find_func): New function.
- (builtin_find): New variable.
- (hide_func): Save SAVED_DRIVE and SAVED_PARTITION to TMP_DRIVE
- and TMP_PARTITION, respectively, and resotre them before return.
- (unhide_func): Likewise.
- (setup_func): Likewise. And set SAVED_DRIVE and SAVED_PARTITION
- instead of CURRENT_DRIVE and CURRENT_PARTITION to IMAGE_DRIVE
- and IMAGE_PARTITION before running install_func.
- (builtin_table): Added a pointer to BUILTIN_FIND.
-
-1999-10-19 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/Makefile.am (UNFINISHED_MANUALS): New variable.
- (EXTRA_DIST): Added $(UNFINISHED_MANUALS).
- * docs/new-grub.texi: New file.
-
-1999-10-19 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/Makefile.am (man_MANS): Added mbchk.1.
- [MAINTAINER_MODE] (mbchk.1): New target.
- * docs/mbchk.1: New file. Generated by help2man.
-
-1999-10-18 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * Makefile.am (SUBDIRS): Added util.
- * configure.in: Output util/Makefile.
- * util/Makefile.am: New file.
- * util/mbchk.c: Likewise.
- * util/Makefile.in: Likewise. Generated by automake.
-
-1999-10-17 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/Makefile.am (.texi): Canceled because the dependecies can
- be circulated.
- * stage2/builtins.c (embed_func): Set BUF_TRACK to -1 before
- writing the Stage 1.5 to the disk to clear the cache.
-
-1999-10-17 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/boot.c (load_initrd): Change types of *RAMDISK and
- MOVETO to unsigned long.
- Apply the macro RAW_ADDR to MOVETO.
-
-1999-10-16 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/multiboot.texi: Include the example source files of a
- Multiboot kernel.
- * docs/src2texi: New file.
- * docs/boot.S: Likewise.
- * docs/multiboot.h: Likewise.
- * docs/kernel.c: Likewise.
- * docs/boot.S.texi: Likewise.
- * docs/multiboot.h.texi: Likewise.
- * docs/kernel.c.texi: Likewise.
- * docs/Makefile.am (EXAMPLES): New varilable.
- (multiboot_TEXINFOS): Likewise.
- (SRC2TEXI): Likewise.
- (noinst_SCRIPTS): Added $(SRC2TEXI).
- (EXTRA_DIST): Added $(EXAMPLES) and $(multiboot_TEXINFOS).
- (%.c.texi): New target.
- (%.h.texi): Likewise.
- (%.S.texi): Likewise.
-
-1999-09-22 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * multiboot.texi (BIOS device mapping techniques): New section.
- Stolen from bios_mapping.txt in grub-0.5.
- (Data comparison technique): New subsection.
- (I/O restriction technique): Likewise.
- (Example OS code): Rewrited from scratch.
-
-1999-09-21 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * multiboot.texi: Rename Multiboot Standard to Multiboot
- Specification and upgrade the version to 0.7. Many cleanups
- are done.
-
-1999-10-15 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (setup_func): Save CURRENT_DRIVE and
- CURRENT_PARTITION into IMAGE_DRIVE and IMAGE_PARTITION
- respectively, and restore them before running install_func.
- Use DEVICE instead of BUFFER to store the device name.
- Change each type of STAGE1, STAGE2 and CONFIG_FILE to an array
- of char.
- If installing the Stage 1 into a MBR, embed the Stage 1.5 in the
- sectors right after it.
- Return the result of install_func instead of zero.
-
-1999-10-14 Pavel Roskin <pavel_roskin@geocities.com>
-
- * configure.in: Check for opendisk in libutil.
- * grub/asmstub.c [__FreeBSD__ || __NetBSD__]: Include
- <sys/ioctl.h>.
- [HAVE_OPENDISK]: Include <util.h>.
- [__NetBSD__] (get_floppy_disk_name): Added support for NetBSD.
- [__NetBSD__ && HAVE_OPENDISK] (get_ide_disk_name): Likewise.
- [__NetBSD__ && HAVE_OPENDISK] (get_scsi_disk_name): Likewise.
- (get_drive_geometry) [__NetBSD__]: Use for NetBSD the same ioctl
- as for FreeBSD.
-
-1999-10-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/asmstub.c (assign_device_name): If DEVICE is NULL, set
- DEVICE_MAP[DRIVE] to NULL.
- (get_diskinfo): If open or read fails, call assign_device_name
- to disable accessing the drive DRIVE.
- (grub_stage2): The device mapping routine is moved to ...
- (init_device_map): ... here. This new function also reads/writes
- a device map file. If DEVICE_MAP_FILE already exists, then use
- the data in it instead of probing devices. Otherwise, guess the
- map between BIOS drives and OS devices, and write it to the file
- DEVICE_MAP_FILE if it can be opened.
- * grub/main.c (device_map_file): New variable.
- (default_device_map_file): Likewise.
- (OPT_DEVICE_MAP): New macro.
- (longopts): Added an entry for "device-map".
- (usage): Print the usage about --device-map as well.
- (main): Set DEFAULT_DEVICE_MAP_FILE to DEVICE_MAP_FILE. If
- OPT_DEVICE_MAP is found, set DEVICE_MAP_FILE to a duplicated
- string of OPTARG.
- * stage2/shared.h [GRUB_UTIL] (device_map_file): Declared.
- * docs/grub.8: Regenerated.
-
-1999-10-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (color_func): Do not set NORMAL_COLOR or
- HIGHLIGHT_COLOR directly, but use NEW_NORMAL_COLOR and
- NEW_HIGHLIGHT_COLOR as temporary storages instead.
- New internal function `color_number' is used to convert a
- symbolic color representation into a color number.
- Try color_number at first, and if fails, then try
- safe_parse_maxint for each of NORMAL and HIGHLIGHT.
- (builtin_color): The long doc does not describe the raw number
- syntax but the symbolic color name syntax.
- * docs/grub.texi (Commands): Adjusted to the long doc of
- BUILTIN_COLOR.
- * docs/menu.lst: Add examples of "fallback" and "color".
-
-1999-10-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/char_io.c [!STAGE1_5] (get_cmdline): If C is a newline
- or a return, then set LPOS to LLEN and call the function
- cl_setcpos.
- [!STAGE1_5] (grub_strncat): New function.
- * stage2/builtins.c (embed_func): New function.
- (builtin_embed): New varilable.
- (setup_func): New function.
- (builtin_setup): New varilable.
- (builtin_table): Added a pointer to BUILTIN_EMBED and a pointer
- to BUILTIN_SETUP.
- * stage2/shared.h (grub_strncat): Declared.
-
- * stage2/Makefile.am (stage2_size.h): ../stage2/stage2 ->
- pre_stage2. Reported by Pavel Roskin.
-
-1999-10-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Pavel Roskin:
- * acinclude.m4 (grub_PROG_OBJCOPY_ABSOLUTE): main -> cmain.
- * stage2/boot.c (load_image): Only CUR_ADDR, not ENTRY_ADDR
- should be 1M-aligned for NetBSD. Don't align symbol table on 4k
- boundaries if the kernel doesn't require it.
-
-1999-10-10 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/asm.S [!STAGE1_5] (start): New label to force ld quiet.
- [!STAGE1_5] (_start): Likewise.
- * stage2/builtins.c (install_func): Rewritten heavily almost
- from scratch. As the blocklist was moved to the first sector of
- Stage 2, always write sectors of Stage 2 to the disk.
- * stage1/stage1.h (STAGE1_STAGE2_SECTOR): 0x40 -> 0x41.
- (STAGE1_STAGE2_ADDRESS): 0x44 -> 0x45.
- (STAGE1_STAGE2_SEGMENT): 0x46 -> 0x47.
- (STAGE1_BOOT_DRIVE): 0x3f -> 0x40.
-
-1999-10-09 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Stage1 supports both the CHS mode and the LBA mode.
-
- * stage1/Makefile.am (nodist_pkgdata_DATA): Removed stage1_lba.
- (BUILT_SOURCES): Deleted.
- (CLEANFILES): Likewise.
- (noinst_PROGRAMS): Removed stage1_lba.exec.
- (stage1_exec_SOURCES): Removed stage2_size.h.
- (stage2_size.h): Deleted.
- (stage1_lba_exec_SOURCES): Likewise.
- * stage1/stage1.S: Rewritten from scratch.
- * stage1/stage1_lba.S: Deleted.
- * stage1/stage1.h (COMPAT_VERSION_MAJOR): Set to 3.
- (COMPAT_VERSION_MINOR): Set to 0.
- (STAGE1_VER_MAJ_OFFS): Set to 0x3e.
- (STAGE1_FIRSTLIST): Deleted.
- (STAGE1_INSTALLSEG): Likewise.
- (STAGE1_INSTALLADDR): Likewise.
- (STAGE1_MINPARAMSIZE): Likewise.
- (STAGE1_LISTSIZE): Likewise.
- (STAGE1_ID_OFFSET): Likewise.
- (STAGE1_ID_CHS): Likewise.
- (STAGE1_ID_LBA): Likewise.
- (STAGE1_STAGE2_SECTOR): New macro.
- (STAGE1_STAGE2_ADDRESS): Likewise.
- (STAGE1_STAGE2_SEGMENT): Likewise.
- (STAGE1_BOOT_DRIVE): Likewise.
- * stage2/start.S: New file.
- * stage2/Makefile.am (noinst_DATA): New variable.
- (CLEANFILES): Set to "$(nodist_pkgdata_DATA) $(noinst_DATA)
- $(BUILT_SOURCES)".
- (noinst_PROGRAMS): Removed stage2.exec, and added start.exec and
- pre_stage2.exec.
- (STAGE2_LINK): Deleted.
- (PRE_STAGE2_LINK): New variable.
- (START_LINK): Likewise.
- (stage2_exec_SOURCES): Deleted.
- (stage2_exec_CFLAGS): Likewise.
- (stage2_exec_LDFLAGS): Likewise.
- [NETBOOT_SUPPORT] (stage2_exec_LDADD): Likewise.
- (pre_stage2_exec_SOURCES): New variable.
- (pre_stage2_exec_CFLAGS): Likewise.
- (pre_stage2_exec_LDFLAGS): Likewise.
- [NETBOOT_SUPPORT] (pre_stage2_exec_LDADD): Likewise.
- (BUILT_SOURCES): Likewise.
- (start_exec_SOURCES): Likewise.
- (start_exec_CFLAGS): Likewise.
- (start_exec_LDFLAGS): Likewise.
- (start_exec_DEPENDENCIES): Likewise.
- (stage2_size.h): New rule.
- (stage2): Likewise.
- (e2fs_stage1_5_exec_SOURCES): Added start.S.
- (fat_stage1_5_exec_SOURCES): Likewise.
- (ffs_stage1_5_exec_SOURCES): Likewise.
- (minix_stage1_5_exec_SOURCES): Likewise.
- * stage2/asm.S (start): Renamed to ...
- (main): ... this.
- [STAGE1_5] (main): Jump to (codestart - EXT_C(main) + 0x2200)
- instead of (codestart - EXT_C(start) + 0x2000).
- [!STAGE1_5] (main): Jump to (codestart - EXT_C(main) + 0x8200)
- instead of (codestart - EXT_C(start) + 0x8000).
- [STAGE1_5] (chain_stage2): Use main instead of start.
- * stage2/shared.h (BOOTSEC_LISTSIZE): New macro.
- * stage2/stage1_5.c: Change the second argument for chain_stage2
- to 0x8200.
-
-1999-10-08 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * configure.in (--with-binutils): New option to specify a
- directory to find binutils.
- (CFLAGS): If WITH_BINUTILS is not empty, added the option `-B'.
- (LD): Do not check for this. We don't use ld directly anyway.
- (RANLIB): If WITH_BINUTILS is not empty, search the directory
- WITH_BINUTILS first.
- (OBJCOPY): Likewise.
- * acinclude.m4 (grub_ASM_USCORE): Add CFLAGS into
- AC_TRY_COMMAND.
- (grub_ASM_ADDR32): Likewise.
- (grub_ASM_PREFIX_REQUIREMENT): Likewise.
- (grub_PROG_OBJCOPY_ABSOLUTE): Use CC instead of LD.
-
-1999-10-04 Pavel Roskin <pavel_roskin@geocities.com>
-
- * stage2/freebsd.h (struct bootinfo): New member, bi_bios_dev.
- * stage2/boot.c (bsd_boot): Set BI.BI_BIOS_DEV to SAVED_DRIVE.
-
-1999-10-04 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Pavel Roskin:
- * docs/grub.texi: Fix typos.
- * stage2/builtins.c (install_func): Reformat the warning message
- about the option `d'.
-
-1999-10-03 Gordon Matzigkeit <gord@fig.org>
-
- * stage2/builtins.c (install_func): Fix check for the Stage 2 id.
- From Pavel Roskin.
-
- * debian/Makefile.am (EXTRA_DIST): Add postinst and prerm.
-
-1999-10-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (boot_func): Pass MBI.CMDLINE instead of ARG
- to bsd_boot.
-
-1999-10-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/gunzip.c (gunzip_test_header): Check if CURRENT_DRIVE
- is 0x20 instead of if the fs type is TFTP, because GRUB does not
- mount CURRENT_DRIVE when using a block file. Reported by Pavel
- Roskin.
-
-1999-10-02 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (cat_func): Do not read the whole of a file
- at one time. Instead, repeat reading one byte and print it on
- the screen.
- * docs/grub.texi (Command line): List the available key
- bindings.
- (Commands): Added descriptions about "geometry", "device" and
- "cat".
-
-1999-10-02 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Now it is possible to build the grub shell with old BSD curses.
-
- * stage2/shared.h [!A_NORMAL] (A_NORMAL): Set to zero.
- [!A_REVERSE && A_STANDOUT] (A_REVERSE): Set to A_STANDOUT.
- [!A_REVERSE && !A_STANDOUT] (A_REVERSE): Set to zero.
-
-1999-09-30 Pavel Roskin <pavel_roskin@geocities.com>
-
- * stage2/disk_io.c (set_bootdev): Mask 0x7F instead of 0x79 of
- the device number.
-
-1999-10-01 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * configure.in (--without-curses): New option. If WITH_CURSES is
- no, do not check for curses.
-
- * stage2/disk_io.c (set_device) [STAGE1_5]: Change the type of
- DEV to unsigned long.
- * stage2/builtins.c (install_func): Always check for the Stage 2
- id in FILE.
- Reported by Pavel Roskin.
-
-1999-09-30 Gordon Matzigkeit <gord@fig.org>
-
- * debian/postinst: New file to call install-info.
- * debian/prerm: Likewise.
- * debian/rules (binary-arch): Add postinst and prerm, compress the
- info files, and call dpkg-shlibdeps.
-
- * stage2/cmdline.c (skip_to): Restructure, and count tabs as
- whitespace.
- (find_command): Likewise.
-
-1999-09-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/getopt.c: Moved to ...
- * lib/getopt.c: ... here.
- * grub/getopt1.c: Moved to ...
- * lib/getopt1.c: ... here.
- * grub/getopt.h: Moved to ...
- * lib/getopt.h: ... here.
- * grub/Makefile.am (AM_CFLAGS): Added -I$(top_srcdir)/lib.
- (grub_LDADD): Added ../lib/libcommon.a.
- * lib/Makefile.am: New file.
- * Makefile.am (SUBDIRS): Added lib.
- * configure.in: lib/Makefile is added into the arguments for
- AC_OUTPUT.
-
-1999-09-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Pavel Roskin:
- * stage2/defs.h (time_t): Renamed to ...
- (mach_time_t): ... this.
- (daddr_t): Renamed to ...
- (mach_daddr_t): ... this.
- (uid_t): Renamed to ...
- (mach_uid_t): ... this.
- (gid_t): Renamed to ...
- (mach_gid_t): ... this.
- (ino_t): Renamed to ...
- (mach_ino_t): ... this.
- * stage2/disk_inode.h (FFS_MAX_FASTLINK_SIZE): Use mach_daddr_t
- instead of daddr_t.
- (struct icommon): Use mach_uid_t, mach_gid_t, mach_time_t and
- mach_daddr_t, instead of uid_t, gid_t, time_t and daddr_t.
- * stage2/fs.h (BBLOCK): Use mach_daddr_t instead of addr_t.
- (SBLOCK): Likewise.
- (ROOTINO): Use mach_ino_t instead of ino_t.
- (struct fs): Use mach_daddr_t and mach_time_t instead of daddr_t
- and time_t.
- (struct cg): Use mach_time_t instead of time_t.
- (struct ocg): Likewise.
- (cgbase): Use mach_daddr_t instead of daddr_t.
- (itod): Likewise.
-
-1999-09-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * acinclude.m4 (grub_CHECK_START_SYMBOL): Use AC_TRY_LINK
- instead of AC_TRY_COMMAND.
- (grub_CHECK_USCORE_START_SYMBOL): Likewise.
- (grub_CHECK_END_SYMBOL): Likewise.
- (grub_CHECK_USCORE_END_SYMBOL): Likewise.
-
- * stage2/disk_io.c (set_device) [!STAGE1_5]: Use RESULT instead
- of RETVAL to check if the analysis succeeds.
-
-1999-09-29 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (install_func): If the Stage 2 id in FILE is
- not STAGE2_ID_STAGE2, set IS_STAGE1_5 to 1, otherwise to 0.
- Use CONFIG_FILE_LOCATION to point to the location of the name of
- a configuration file in Stage 2.
- If the option `p' is present and IS_STAGE1_5 is non-zero, reset
- the device information in CONFIG_FILE_LOCATION.
- (cat_func): New function.
- (builtin_cat): New variable.
- (builtin_table): Added a pointer to BUILTIN_CAT.
- (geometry_func): Call real_open_partition with the argument 1
- after printing out the drive information.
- * stage2/disk_io.c (real_open_partition): Made global.
- [!STAGE1_5] (print_completions): In the command completion and
- the filename completion, print a newline at the last if
- IS_COMPLETION is zero.
- * stage2/shared.h (real_open_partition): Declared.
- * stage2/fsys_ext2fs.c (ext2fs_dir): Do not print a newline even
- if PRINT_POSSIBILITIES is less than zero.
- * stage2/fsys_ffs.c (ffs_dir): Likewise.
- * stage2/fsys_fat.c (fat_dir): Likewise.
- * stage2/fsys_minix.c (minix_dir): Likewise.
-
-1999-09-29 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage1/stage1.S [!FFS_STAGE1_5] (blocklist_default_len): Do
- not divide the size by 512, but shift the size to the right by
- 9 instead, because of a binutils-2.9.1.0.x bug.
- * stage1/stage1_lba.S [!FFS_STAGE1_5] (blocklist_default_len):
- Likewise.
- * stage2/builtins.c (install_func): When installing Stage 1.5,
- if set_device returns NULL, then set CURRENT_DRIVE to 0xFF and
- CONFIG_FILE to PTR.
-
-1999-09-26 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/char_io.c [!STAGE1_5] (get_cmdline): In cl_insert, call
- cl_setcpos before printing BUF, even if LPOS is equal to LLEN.
- In the completion, if RET is zero, do not call cl_init.
- * stage2/disk_io.c [!STAGE1_5] (print_completions): In the
- filename completion, if UNIQUE is 1, check if UNIQUE_STRING is a
- directory or not. If so, append '/' to BUF.
- In the partition completion, if IS_COMPLETION is non-zero and
- *UNIQUE_STRING is not NUL, copy UNIQUE_STRING to PTR. Do not
- append '/'.
- (real_open_partition) [!STAGE1_5]: If DO_COMPRESSION is non-zero,
- call print_a_completion.
- (check_BSD_parts) [!STAGE1_5]: Likewise.
- [!STAGE1_5] (print_a_completion): Ignore NAME if it is "." or
- "..".
-
-1999-09-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * acinclude.m4 (grub_CHECK_USCORE_END_SYMBOL): Do not call
- AC_DEFINE within AC_CACHE_VAL. Call it after AC_CACHE_VAL.
- * stage2/Makefile.am (STAGE1_5_COMPILE): Do not define
- CONFIG_FILE_ASM.
- * stage2/asm.S (config_file) [STAGE1_5]: Set the first 4 bytes
- to 0xffffffff and the following to "/boot/grub/stage2".
- (config_file) [!STAGE1_5]: Set to "/boot/grub/menu.lst".
- * stage2/builtins.c (install_func): Read a Stage 2 before
- handling the `p' option.
- If the `configfile' option is present and FILE is a Stage 2,
- translate the device name to the internal device representation
- and copy the result to STR.
- * stage2/disk_io.c [STAGE1_5] (sane_partition): Eliminated.
- [STAGE1_5] (incomplete): Likewise.
- [STAGE1_5] (disk_choice): Likewise.
- [STAGE1_5] (part_choice): Likewise.
- (set_device) [STAGE1_5]: Assume that the first 4 bytes of DEVICE
- is a device number. Set DRIVE to the forth byte of DEV and
- PARTITION to the first 3 bytes of DEV. If DRIVE is 0xFF, set
- CURRENT_DRIVE and CURRENT_PARTITION to SAVED_DRIVE and
- SAVED_PARTITION, respectively. Otherwise set to DRIVE and
- PARTITION, respectively.
- (setup_part) [STAGE1_5]: Always call set_device.
-
-1999-09-24 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * acinclude.m4 (grub_CHECK_END_SYMBOL): Add a missing
- double-quote. Reported by Johannes Kroeger
- <hanne@squirrel.owl.de>.
-
-1999-09-14 Gordon Matzigkeit <gord@fig.org>
-
- * stage1/stage1.S (blocklist_default_start): New label for default
- blocklist start sector.
- (blocklist_default_len): New label for default blocklist length.
- (blocklist_default_seg): New label for default blocklist segment.
- * stage1/stage1_lba.S (blocklist_default_start): Likewise.
- (blocklist_default_len): Likewise.
- (blocklist_default_seg): Likewise.
-
-1999-09-23 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * acinclude.m4 (grub_ASM_ADDR32): First, create a template
- source file "conftest.s.in", and then, replace @ADDR32@ with
- "addr32" if GRUB_CV_ASM_PREFIX_REQUIREMENT is yes, otherwise,
- replace it with "addr32;". Reported by John Tobey
- <spam@john-edwin-tobey.org>.
-
-1999-09-23 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (debug_fs_print_func): Renamed to ...
- (disk_read_print_func): ... this.
- (fstest_func): Use DISK_READ_HOOK instead of DEBUG_FS.
- (install_func): Rename debug_fs_savesect_func to
- disk_read_savesect_func.
- Rename debug_fs_blocklist_func to disk_read_blocklist_func.
- Use DISK_READ_HOOK instead of DEBUG_FS.
- (testload_func): Use DISK_READ_HOOK instead of DEBUG_FS.
- * stage2/disk_io.c [!STAGE1_5] (debug_fs): Renamed to ...
- [!STAGE1_5] (disk_read_hook): ... this.
- [!STAGE1_5] (debug_fs_func): Renamed to ...
- [!STAGE1_5] (disk_read_func): ... this.
- (rawread) [!STAGE1_5]: Use DISK_READ_HOOK and DISK_READ_FUNC
- instead of DEBUG_FS and DEBUG_FS_FUNC.
- (grub_read) [!STAGE1_5]: Likewise.
- (devread) [!STAGE1_5]: Use DISK_READ_HOOK instead of DEBUG_FS.
- * stage2/fsys_ext2fs.c (ext2fs_read) [!STAGE1_5]: Use
- DISK_READ_HOOK and DISK_READ_FUNC instead of DEBUG_FS and
- DEBUG_FS_FUNC.
- * stage2/fsys_ffs.c (ffs_read) [!STAGE1_5]: Likewise.
- * stage2/fsys_minix.c (minix_read) [!STAGE1_5]: Likewise.
- * stage2/shared.h [!STAGE1_5] (debug_fs): Renamed to ...
- [!STAGE1_5] (disk_read_hook): ... this.
- [!STAGE1_5] (debug_fs_func): Renamed to ...
- [!STAGE1_5] (disk_read_func): ... this.
- * docs/grub.texi: Likewise, replace debug_fs and debug_fs_func
- with disk_read_hook and disk_read_func, respectively.
-
-1999-09-23 Pavel Roskin <pavel_roskin@geocities.com>
-
- * stage2/builtins.c (install_func): New local function,
- debug_fs_savesect_func. Use debug_fs_savesect_func to determine
- the first sector of Stage2. Write Stage 1 after patching Stage
- 2.
-
-1999-09-22 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * acinclude.m4 (grub_ASM_USCORE): Do not define HAVE_ASM_USCORE
- within AC_CACHE_VAL. Define it after AC_CACHE_VAL if
- GRUB_CV_ASM_USCORE is yes.
-
-1999-09-20 Edmund GRIMLEY EVANS <edmundo@rano.demon.co.uk>
-
- * netboot/3c59x.c: INCLUDE_3c59x is replaced by INCLUDE_3C59X
- throughout.
- * netboot/config.c: Likewise.
- * netboot/io.h (__INS): New macro.
- (__OUTS): Likewise.
- (outl): Likewise.
- (inl): Likewise.
- (outl_p): Likewise.
- (inl_p): Likewise.
- Call __INS with the argument `b', with `w' and with `l' to
- define insb, insw and insl, respectively. Likewise, Call __OUTS
- with `b', with `w' and with `l' to define outsb, outw and outl,
- respectively.
- * netboot/pci.h (PCI_VENDOR_ID_VORTEX): New macro.
- (PCI_DEVICE_ID_VORTEX_3c595): Likewise. Defined as a random
- value.
-
-1999-09-20 Edward Killips <ekillips@triton.net>
-
- * stage2/disk_io.c (set_partition_hidden_flag): Set/clear the
- hidden flag, whether the hidden flag is set or not.
-
-1999-09-21 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (install_func): Do not set DEBUG_FS at the
- first read. Set it to DEBUG_FS_BLOCKLIST_FUNC when reading the
- whole of Stage 2. Set FILEPOS to zero at the same time to read
- from the beginning of Stage 2. Reported by Pavel Roskin.
-
-1999-09-20 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- The argument ADDR for the command install is now optional.
-
- * stage2/builtins.c (install_func): If parsing ADDR fails, set
- INSTALLADDR to zero and set PTR to ADDR.
- If INSTALLADDR is zero after parsing the command-line, check if
- the Stage 2 id is STAGE2_ID_STAGE2. If so, set INSTALLADDR to
- 0x8000, otherwise set it to 0x2000.
- Set the install address in the Stage 1 after the automatic
- determination is completed.
- (builtin_install): Say that ADDR is optional in the help
- message.
- * docs/grub.texi: Synchronize the description about install to
- builtins.c. Remove explicit address arguments from all the
- examples. Add a description about help.
- * docs/menu.lst: Do not specify the address argument for
- install.
-
-1999-09-19 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- The completion code is heavily modified.
-
- * stage2/char_io.c [!STAGE1_5] (get_cmdline): In the completion
- code, use COMPLETION_BUFFER to get the completion instead of
- writing to BUF directly.
- Save the position of a possible equal character after a command
- in EQUAL_POS and replace the equal character with a space
- temporarily for the code simplicity.
- At first, just get completions, and, if there is more than one
- completions, then print the list of the completions.
- * stage2/disk_io.c [!STAGE1_5] (do_completion): New variable.
- [!STAGE1_5] (unique): Moved the definition near the beginning.
- [!STAGE1_5] (unique_string): Likewise. And changed the type to
- char *.
- (check_BSD_parts) [!STAGE1_5]: If DO_COMPLETION is non-zero, do
- not print anything.
- (real_open_partition) [!STAGE1_5]: Likewise.
- [!STAGE1_5] (print_fsys_type): Likewise.
- [!STAGE1_5] (print_a_completion): The argument FILENAME is
- renamed to NAME.
- If DO_COMPLETION is non-zero, get the unique part from NAME and
- set UNIQUE_STRING to it.
- If DO_COMPLETION is zero, just print NAME.
- Do not call printf unconditionally.
- [!STAGE1_5] (print_completions): Accept two arguements
- IS_FILENAME and IS_COMPLETION instead of FILENAME.
- Set UNIQUE_STRING to UNIQUE_BUF.
- Set DO_COMPLETION to IS_COMPLETION and set it to zero before
- returning.
- If IS_FILENAME is zero, then complete builtin commands and
- return UNIQUE - 1.
- Use BUF instead of FILENAME.
- If IS_COMPLETION is non-zero, do not print anything.
- Copy UNIQUE_STRING to PTR only if IS_COMPLETION and
- *UNIQUE_STRING are non-zero.
- * stage2/shared.h (COMPLETION_BUF): New macro.
- (COMPLETION_BUFLEN): Likewise.
- (UNIQUE_BUF): Likewise.
- (UNIQUE_BUFLEN): Likewise.
- (MENU_BUF): Set to UNIQUE_BUF + UNIQUE_BUFLEN.
- (MENU_BUFLEN): Set to 0x8000 + PASSWORD_BUF - UNIQUE_BUF.
- (print_completions): Adjusted to the definition.
-
-1999-09-19 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * acinclude.m4 (grub_ASM_PREFIX_REQUIREMENT): Do not call
- AC_DEFINE_UNQUOTEs within AC_CACHE_VAL. Define ADDR32 and DATA32
- after it.
- (grub_CHECK_START_SYMBOL): Do not call AC_DEFINE within
- AC_CACHE_VAL. Define HAVE_START_SYMBOL after it.
- (grub_CHECK_USCORE_START_SYMBOL): Do not call AC_DEFINE within
- AC_CACHE_VAL. Define HAVE_USCORE_START_SYMBOL after it.
- (grub_CHECK_END_SYMBOL): Do not call AC_DEFINE within
- AC_CACHE_VAL. Define HAVE_END_SYMBOL after it.
- (grub_CHECK_USCORE_END_SYMBOL): Do not call AC_DEFINE within
- AC_CACHE_VAL. Define HAVE_USCORE_END_SYMBOL after it.
-
-1999-09-17 Pavel Roskin <pavel_roskin@geocities.com>
-
- * acconfig.h (ADDR32): Removed. This entry is automatically
- created by autoheader.
- (DATA32): Likewise.
- * acinclude.m4 (grub_ASM_ADD32): Use ADDR32 instead of addr32.
- Require grub_ASM_PREFIX_REQUIREMENT.
- (grub_ASM_PREFIX_REQUIREMENT): Define ADDR32 and DATA32.
- * configure.in: Call grub_ASM_PREFIX_REQUIREMENT before
- grub_ASM_ADDR32. Do not define ADDR32 and DATA32.
- * stage1/stage1.S (after_BPB): Use ABS(firstlist) instead of
- firstlist.
- (MSG): Use ABS(x) instead of x.
- (probe_loop): Use the macro MSG for fd_probe_error_string.
- * stage1/stage1_lba.S (after_BPB): Use ABS(firstlist) instead of
- firstlist.
- (MSG): Use ABS(x) instead of x.
- * stage2/asm.S (putchar): Renamed to ...
- (grub_putchar): ... this.
-
-1999-09-18 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/gunzip.c (reset_linalloc): Use the macro RAW_ADDR
- before setting LINALLOC_TOPADDR.
- * stage2/shared.h [!GRUB_UTIL] (RAW_ADDR): Added parenthesises
- to avoid a gcc warning.
- [!GRUB_UTIL] (RAW_SEG): Likewise.
-
-1999-09-18 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * acinclude.m4 (grub_CHECK_START_SYMBOL): New function.
- (grub_CHECK_USCORE_START_SYMBOL): Likewise.
- (grub_CHECK_END_SYMBOL): Likewise.
- (grub_CHECK_USCORE_SYMBOL): Likewise.
- * configure.in: Call grub_CHECK_START_SYMBOL and
- grub_CHECK_USCORE_START_SYMBOL, and if neither start nor _start
- is defined, print an error message and exit.
- Likewise, call grub_CHECK_END_SYMBOL and
- grub_CHECK_USCORE_END_SYMBOL, and if neither end nor _end is
- defined, print an error message and exit.
- * acconfig.h (HAVE_START_SYMBOL): Added the "undef" entry.
- (HAVE_USCORE_START_SYMBOL): Likewise.
- (HAVE_END_SYMBOL): Likewise.
- (HAVE_USCORE_END_SYMBOL): Likewise.
- * stage2/char_io.c (memcheck): Rename the argument START to
- ADDR. Added two missing equal characters.
- [GRUB_UTIL]: Define new local functions start_addr and end_addr.
- [GRUB_UTIL && HAVE_START_SYMBOL]: The function start_addr
- returns START.
- [GRUB_UTIL && HAVE_USCORE_START_SYMBOL]: The function start_addr
- returns _START.
- [GRUB_UTIL && HAVE_END_SYMBOL]: The function end_addr returns
- END.
- [GRUB_UTIL && HAVE_USCORE_END_SYMBOL]: The function end_addr
- returns _END.
- [GRUB_UTIL]: If ADDR is equal to or greater than the address
- returned by start_addr, and ADDR plus LEN is less than the
- address returned by end_addr, return ! ERRNUM.
- * stage2/asm.S (get_code_end) [HAVE_END_SYMBOL]: Use $end as the
- end of the bss.
- [HAVE_USCORE_END_SYMBOL]: Use $_end as the end of the bss.
- * stage2/disk_io.c [!STAGE1_5] (cur_part_desc): Made static.
- Need not to be global any longer.
-
-1999-09-17 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/char_io.c [!STAGE1_5] (get_cmdline): The argument
- COMPLETION is renamed to READLINE.
- Do not initialize KILL here.
- TAB, C-a, C-e, C-f, C-b, C-u, C-k, C-y, C-p and C-n are handled
- only if READLINE is non-zero.
- If ECHO_CHAR is not NUL, do not remove the leading spaces in BUF.
- Add CMDLINE into the history list only if READLINE is non-zero.
- * stage2/stage2.c (cmain): Initialize the kill buffer.
-
-1999-09-17 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Killing, yanking and manipulating the history are supported.
-
- * stage2/shared.h (cur_cmdline): Removed.
- (MAX_CMDLINE): Moved near the beginning of the file.
- (NEW_HEAPSIZE): Likewise.
- (CMDLINE_BUFLEN): Set to MAX_CMDLINE.
- (KILL_BUF): New macro.
- (KILL_BUFLEN): Likewise.
- (HISTORY_BUF): Likewise.
- (HISTORY_SIZE): Likewise.
- (HISTORY_BUFLEN): Likewise.
- (MENU_BUF): Set to HISTORY_BUF + HISTORY_BUFLEN.
- (MENU_BUFLEN): Set to 0x8000 + PASSWORD_BUF - HISTORY_BUF.
- (strcpy): New macro.
- (grub_strcpy): Delared.
- * stage2/boot.c (cur_cmdline): Removed.
- * stage2/char_io.c [!STAGE1_5] (grub_strcpy): New function.
- [!STAGE1_5] (get_history): Likewise.
- [!STAGE1_5] (add_history): Likewise.
- [!STAGE1_5] (get_cmdline): Use BUF instead of CMDLINE for the
- working buffer for the command-line.
- A new function cl_insert is used to insert a string to the
- command-line.
- In the case where C-u or C-k is pressed, copy the string being
- deleted to KILL.
- If C-y is pressed, insert KILL to the command-line.
- If C-p is pressed, fetch the previous command from the history
- list HISTORY, and if C-n is pressed, fetch the next command from
- it.
- If LPOS is less than LLEN, add CMDLINE into the history list.
- If C is equal to KEY_UP, set C to 16, and if C is equal to
- KEY_DOWN, set C to 14.
- [!STAGE1_5] (num_history): New variable.
-
-1999-09-15 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/size_test: Do not check for the size of Stage 2.
- * stage1/Makefile.am (stage2_size.h): Use `set' and `echo'
- instead of awk, since we cannot expect awk is present. Remove
- stage2_size.h before creating it.
-
-1999-09-15 Pavel Roskin <pavel_roskin@geocities.com>
-
- * Makefile.am (SUBDIRS): Put stage1 after stage2 so that stage2
- is built before stage1.
- * stage1/Makefile.am (BUILT_SOURCES): New varilable.
- (CLEANFILES): Added BUILT_SOURCES.
- (stage1_exec_SOURCES): Added stage2_size.h.
- (stage1_lba_exec_SOURCES): Likewise.
- (stage2_size.h): New rule.
- * stage1/stage1.S: Include <stage2_size.h> and use STAGE2_SIZE
- to determine how much number of sectors to be read when loading
- Stage 2.
- * stage1/stage1_lba.S: Likewise.
-
-1999-09-15 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * netboot/config.h: Moved to ...
- * netboot/netboot_config.h: ... here.
- * netboot/config.c: Include netboot_config.h instead of config.h.
- * netboot/fsys_tftp.c: Likewise.
- * netboot/ip.c: Likewise.
- * netboot/Makefile.am (libdrivers_a_SOURCES): Removed config.h
- and added netboot_config.h.
-
-1999-09-14 Pavel Roskin <pavel_roskin@geocities.com>
-
- * grub/asmstub.c [__linux__]: On GLibc 2.0 and newer use lseek,
- don't include <linux/fs.h> and define BLKFLSBUF if needed.
-
-1999-09-14 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Now the grub shell works fine on FreeBSD. A patch by Pavel
- Roskin is modified and applied.
-
- * grub/asmstub.c (get_drive_geometry): New function.
- (get_diskinfo): Use get_drive_geometry to set the geometry of
- DRIVE.
-
-1999-09-14 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * configure.in (--enable-ne): Made the description more clear.
- (--enable-nepci): Likewise.
- (--enable-wd): Likewise.
- (--enable-t503): Likewise.
- (--enable-t509): Likewise.
- (--enable-3c59x): Likewise.
- (--enable-lance): Likewise.
- (--enable-cs): Likewise.
- (--enable-eepro100): Likewise.
- (--enable-wd-default_mem): Renamed to ...
- (--enable-wd-default-mem): ... this.
- (--enable-cs-scan): Corrected the description.
- (NETBOOT_SUPPORT): Defined if NET_CFLAGS is not empty.
- * stage2/Makefile.am (stage2_exec_LDADD): Defined only if
- NETBOOT_SUPPORT is true.
- * netboot/Makefile.am (LIBDRIVERS): New variable. If
- NETBOOT_SUPPORT is true, set to libdriver.a, otherwise set to an
- empty string.
- (noinst_LIBRARIES): Set to LIBDRIVERS.
- (DRIVERS): Added 3c509.h, cs89x0.h and ns8390.h.
- (libdrivers_a_SOURCES): Added byteorder.h, config.h, if.h, io.h,
- ip.h, netboot.h, netdevice.h, nic.h and pic.h.
- (libdrivers_a_CFLAGS): Added -fno-builtin and -nostdinc and
- removed -O2.
- * stage2/char_io.c (grub_sprintf): Added parenthesises to avoid
- gcc warnings.
- * stage2/gunzip.c (gunzip_test_header): Check if FSYS_TYPE is
- TFTP. If so, set IS_TFTP to non-zero, otherwise to zero. And,
- use IS_TFTP to check if we have GZIP_CRC instead of the equation
- "FILEMAX == 16 * 1024 * 1024".
-
-1999-09-13 Edmund GRIMLEY EVANS <edmundo@rano.demon.co.uk>
-
- The netboot support in the Dresden version of GRUB is integrated.
-
- * Makefile.am (SUBDIRS): Added netboot.
- * configure.in (--enable-tftp): New option.
- (--enable-ne): Likewise.
- (--enable-nepci): Likewise.
- (--enable-wd): Likewise.
- (--enable-t503): Likewise.
- (--enable-t509): Likewise.
- (--enable-3c59x): Likewise.
- (--enable-lance): Likewise.
- (--enable-cs): Likewise.
- (--enable-eepro100): Likewise.
- (--enable-ne-scan): Likewise.
- (--enable-wd-default_mem): Likewise.
- (--enable-cs-scan): Likewise.
- (NET_CFLAGS): New variable.
- (NET_EXTRAFLAGS): Likewise.
- Do AC_OUTPUT for netboot/Makefile as well.
- * stage1/stage1.S: Set the number of sectors for Stage 2 to 130.
- * stage1/stage1_lba.S: Likewise.
- * stage2/Makefile.am (stage2_exec_LDADD): Added
- ../netboot/libdrivers.a.
- * stage2/asm.S [!STAGE1_5] (currticks): New function.
- * stage2/char_io.c [!STAGE1_5] (grub_sprintf): Likewise.
- [!STAGE1_5] (grub_memcmp): Likewise.
- * stage2/disk_io.c (fsys_table) [FSYS_TFTP]: Added an entry for
- tftp.
- (sane_partition) [!STAGE1_5]: If CURRENT_DRIVE is a network
- drive, return 1.
- (real_open_partition) [!STAGE1_5]: Likewise.
- (set_device): If DEVICE contains a network drive, set
- CURRENT_DRIVE to 0x20.
- * stage2/filesys.h [FSYS_TFTP] (FSYS_TFTP_NUM): Defined as 1.
- [!FSYS_TFTP] (FSYS_TFTP_NUM): Defined as 0.
- (NUM_FSYS): Added FSYS_TFTP_NUM.
- * stage2/gunzip.c (gunzip_test_header): If FILEMAX >= 16MB, do
- not try to examine the last 8 bytes of the file. This is
- required for compressed files by TFTP.
- * stage2/shared.h (sprintf): New macro.
- (memcmp): Likewise.
- (currticks): Declared.
- (grub_sprintf): Likewise.
- (grub_memcmp): Likewise.
- * stage2/size_test: Set the maximum size of Stage 2 to 66560.
- * netboot/3c509.c: New file.
- * netboot/3c509.h: Likewise.
- * netboot/3c59x.c: Likewise.
- * netboot/Makefile.am: Likewise.
- * netboot/Makefile.in: Likewise.
- * netboot/byteorder.h: Likewise.
- * netboot/compile: Likewise.
- * netboot/config.c: Likewise.
- * netboot/config.h: Likewise.
- * netboot/cs89x0.c: Likewise.
- * netboot/cs89x0.h: Likewise.
- * netboot/eepro100.c: Likewise.
- * netboot/fsys_tftp.c: Likewise.
- * netboot/if.h: Likewise.
- * netboot/io.h: Likewise.
- * netboot/ip.c: Likewise.
- * netboot/ip.h: Likewise.
- * netboot/lance.c: Likewise.
- * netboot/netboot.h: Likewise.
- * netboot/netdevice.h: Likewise.
- * netboot/nic.h: Likewise.
- * netboot/ns8390.c: Likewise.
- * netboot/ns8390.h: Likewise.
- * netboot/pci.c: Likewise.
- * netboot/pci.h: Likewise.
-
-1999-09-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * configure.in (--enable-maintainer-mode): Do not use our own
- rule, but use AM_MAINTAINER_MODE instead. If the maintainer mode
- is enabled, then check for perl, and if it is not found, print
- an error message and abort.
- * docs/Makefile.am (grub.8): Regenerated if MAINTAINER_MODE is
- defined, instead of GRUB_MAINT. Use the variable PERL rather
- than running help2man directly.
-
-1999-09-13 Pavel Roskin <pavel_roskin@geocities.com>
-
- * stage2/pc_slice.h (IS_PC_SLICE_TYPE_EXTENDED): New macro.
- * stage2/disk_io.c (real_open_partition): Use
- IS_PC_SLICE_TYPE_EXTENDED instead of comparing CURRENT_SLICE
- with the extended partition types.
-
-1999-09-11 Pavel Roskin <pavel_roskin@geocities.com>
-
- * acconfig.h: New file for autoheader support.
- * acinclude.m4 (grub_ASM_EXT_C) Renamed to ...
- (grub_ASM_USCORE): ... this. Define HAVE_ASM_USCORE if a C
- symbol gets an underscore after compiling to assembler.
- * configure.in: Added AM_CONFIG_HEADER. Autoconf 2.13 is now
- required. Test for wgetch(), not getch() in -l[n]curses.
- * stage2/shared.h (EXT_C): Defined.
- Include the best existing header for [n]curses.
-
-1999-09-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/boot.c (load_image): Use CURRENT_DRIVE and
- CURRENT_PARTITION instead of SAVED_DRIVE and SAVED_PARTITION for
- the boot device in the Multiboot information. Reported by
- Stephen Early <steve@greenend.org.uk>.
-
-1999-09-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/disk_io.c (sane_partition) [STAGE1_5]: Defined.
- (set_device): Use sane_partition to make sure that CURRENT_DRIVE
- has a valid value. Reported by Pavel Roskin.
-
-1999-09-11 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Pavel Roskin:
- * stage2/builtins.c (device_func) [GRUB_UTIL]: Use check_device
- in order to make sure that DEVICE exists.
- * grub/asmstub.c (check_device): New function.
- (grub_stage2): Use check_device to probe a device.
-
- * stage2/builtins.c (geometry_func) [GRUB_UTIL]: Copy the
- modified geometry to GEOM and reset BUF_DRIVE. Reported by Pavel
- Roskin.
-
- * grub/main.c (no_floppy): New variable.
- (probe_second_floppy): Likewise.
- (OPT_NO_FLOPPY): New macro.
- (OPT_PROBE_SECOND_FLOPPY): Likewise.
- (longopts): Added no-floppy and probe-second-floppy.
- (usage): Added the descriptions about --no-floppy and
- --probe-second-floppy.
- (main): Handle OPT_PROBE_SECOND_FLOPPY and OPT_NO_FLOPPY.
- * grub/asmstub.c (grub_stage2): Print a message before the probe
- routine. If NO_FLOPPY is non-zero, do not probe any floppy drive.
- If PROBE_SECOND_FLOPPY is zero, skip the probe of the second
- floppy drive.
- (get_floppy_disk_name): New function.
- (get_ide_disk_name): Likewise.
- (get_scsi_disk_name): Likewise.
-
-1999-09-10 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (device_func): New function.
- (builtin_device): New variable.
- (builtin_table): Added the pointer to BUILTIN_DEVICE.
- (builtin_geometry) [GRUB_UTIL]: Accept extra arguments,
- CYLINDER, HEAD, SECTOR and TOTAL_SECTOR, and, if they are found,
- set the geometry of a drive specified to them.
- * grub/asmstub.c (disks): Made global.
- (assign_device_name): New function.
-
-1999-09-09 Gordon Matzigkeit <gord@fig.org>
-
- * docs/grub.texi (Commands): Synchronize descriptions with
- builtins.c.
-
- * stage2/builtins.c (hide_func): Use set_partition_hidden_flag.
- (unhide_func): Likewise.
- Many help message cleanups. From Pavel Roskin.
-
- * stage2/shared.h (set_partition_hidden_flag): Declare.
-
- * stage2/disk_io.c (set_partition_hidden_flag): New function
- merged from hide_partition and unhide_partition. Make sure we OR
- with the inverse of the flag bit rather than XORing to unhide the
- partition.
-
-1999-09-10 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/asmstub.c (_FILE_OFFSET_BITS): Defined.
- (biosdisk) [!__linux__]: Pass the offset argument as off_t
- instead of int to lseek, and compare the return value with
- OFFSET. Reported by Pavel Roskin.
- (grub_stage2) [!__linux__ && !__GNU__]: Print a warning message.
-
-1999-09-08 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/stage2.c (run_menu): If run_script is successfully
- finished, break the loop. Reported by Pavel Roskin.
- Do not wait an input character when FALLBACK_ENTRY is less than
- zero.
- * stage2/cmdline.c (run_script): If ERRNUM is non-zero, wait an
- input character, whether FALLBACK is less than zero or not.
-
-1999-09-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (configfile_func): New function.
- (builtin_configfile): New variable.
- (builtin_table): Added the pointer to BUILTIN_CONFIGFILE.
-
-1999-09-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Pavel Roskin:
- * stage2/asm.S [!STAGE1_5] (chain_stage2): Deleted.
- [STAGE1_5] (get_code_end): Likewise.
- * stage2/char_io.c (grub_strncat): Likewise.
- * stage2/common.c [STAGE1_5] (saved_mem_upper): Likewise.
- * stage2/smp-imps.c (imps_release_cpus): Likewise.
- (imps_any_new_apics): Made static.
- (imps_enabled): Likewise.
- (imps_num_cpus): Likewise.
- (imps_lapic_addr): Likewise.
- (imps_cpu_apic_map): Likewise.
- (imps_apic_cpu_map): Likewise.
-
-1999-09-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/builtins.c (testload_func): Fix the typos: 0x2000000 ->
- 0x200000 and 0x3000000 -> 0x300000.
-
-1999-09-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Hisazumi Kenji <nel@soraneko.com>:
- * stage2/fsys_ffs.c (mapblock_offset): New variable.
- (mapblock_bsize): Likewise.
- (MAPBUF): New macro.
- (MAPBUF_LEN): Likewise.
- (ffs_mount): Set MAPBLOCK_OFFSET to -1.
- (block_map): Added partial read support.
-
-1999-09-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/cmdline.c (find_command): If COMMAND is less than
- (*BUILTIN)->NAME in dictionary order, break the loop.
- * stage2/builtins.c (builtin_chainloader): Capitalize the
- variable name in the short doc.
- (builtin_color): Likewise.
- (builtin_geometry): Likewise.
- (builtin_help): Likewise.
- (builtin_hide): Likewise.
- (builtin_initrd): Likewise.
- (builtin_install): Likewise.
- (builtin_kernel): Likewise.
- (builtin_module): Likewise.
- (builtin_modulenounzip): Likewise.
- (builtin_pause): Likewise.
- (builtin_read): Likewise.
- (builtin_root): Likewise.
- (builtin_testload): Likewise.
- (builtin_unhide): Likewise.
- (builtin_uppermem): Likewise.
-
-1999-09-05 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- The internal of the command handling is heavily modified, and
- a new command "help" is added.
-
- * stage1/stage1.S: Set the number of sectors for Stage 2 to 110.
- * stage1/stage1_lba.S: Likewise.
- * stage2/builtins.c: New file.
- * stage2/Makefile.am (libgrub_a_SOURCES): Added builtins.c.
- (stage2_exec_SOURCES): Likewise.
- * stage2/boot.c (load_image): Return kernel_t instead int.
- (bsd_boot): Change the type of the first argument to kernel_t.
- * stage2/char_io.c (get_cmdline): Do not accept the argument
- COMMANDS and accept the argument COMPLETION.
- Print completions only if COMPLETION is non-zero.
- Print the list of short docs when the command is completed.
- * stage2/cmdline.c [GRUB_UTIL]: Do not include apic.h and
- smp-imps.h.
- (fallback): Deleted.
- (password): Likewise.
- (debug): Likewise.
- (normal_color): Likewise.
- (highlight_color): Likewise.
- (print_cmdline_message): New function.
- (commands): Deleted.
- (debug_fs_print_func): Likewise.
- (installaddr): Likewise.
- (installlist): Likewise.
- (installsect): Likewise.
- (debug_fs_blocklist_func): Likewise.
- (find_command): New function.
- (init_cmdline): Initialize the data for the command-line
- interface. The function to print the message is moved to
- print_cmdline_message.
- (enter_cmdline): Rewritten from scratch. Now deal with only the
- pure command-line and the function to deal with a menu entry is
- moved to run_script.
- (run_script): New function.
- * stage2/shared.h (PASSWORD_BUF): New macro.
- (PASSWORD_BUFLEN): Likewise.
- (CMDLINE_BUF): Likewise.
- (CMDLINE_BUFLEN): Likewise.
- (MENU_BUF): Likewise.
- (MENU_BUFLEN): Likewise.
- (fallback): Deleted.
- (fallback_entry): Declared.
- (default_entry): Likewise.
- (BUILTIN_CMDLINE): New macro.
- (BUILTIN_MENU): Likewise.
- (BUILTIN_TITLE): Likewise.
- (struct builtin): New tag.
- (builtin_table): Declared.
- (cmdline_t): Deleted.
- (kernel_t): New type.
- (kernel_type): Declared.
- (grub_timeout): Likewise.
- (init_builtins): Likewise.
- (init_config): Likewise.
- (find_command): Likewise.
- (print_cmdline_message): Likewise.
- (run_script): Likewise.
- [!STAGE1_5] (bsd_boot): Deleted.
- [!STAGE1_5] (load_image): Likewise.
- [!STAGE1_5] (load_module): Likewise.
- [!STAGE1_5] (load_initrd): Likewise.
- * stage2/size_test: Set the maximum size of Stage 2 to 56320.
- * stage2/stage2.c (grub_timeout): Deleted.
- (menu_t): Likewise.
- (run_menu): Changed the return type to void.
- Use FALLBACK_ENTRY instead of FALLBACK.
- Do not check the return value of enter_cmdline.
- (run_menu) [GRUB_UTIL]: Call stop instead of returning
- MENU_ABORT.
- (cmain): Set MENU_ENTRIES to MENU_BUF.
- Call init_config instead of clearing the variables directly.
- Use CMDLINE_BUF for the command-line buffer instead of the
- stack.
- Adapted the analysis routine for the configuration file to the
- new builtin commands interface.
- Run enter_cmdline forever.
- If run_menu returns, restart the loop.
-
-1999-09-04 Pavel Roskin <pavel_roskin@geocities.com>
-
- * docs/menu.lst: More meaningful examples. Not using (0x80,0)
- notation anymore.
- * stage2/stage2.c (run_menu): Erase the entered password before
- get_cmdline(). Help on TAB disabled when entering the password.
- * stage2/char_io.c (get_cmdline): Restore command-line even if
- there is no help string.
- * configure.in: --disable-gunzip disables decompression in
- stage2.
- * stage2/gunzip.c [NO_DECOMPRESSION]: Disable all code if
- decompression is disabled.
-
-1999-09-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/boot.c (load_image): Use PHDR->P_PADDR instead of
- PHDR->P_VADDR. Reported by Ramon van Handel <vhandel@chem.vu.nl>.
-
-1999-09-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/help2man: Upgraded to 1.013.
- * docs/grub.8: Regenerated.
-
-1999-09-02 Pavel Roskin <pavel_roskin@geocities.com>
-
- * stage2/cmdline.c (enter_cmdline) [GRUB_UTIL]: Add a space in
- the LBA warning message.
-
-1999-09-02 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- The character `=' after a command is now optional.
-
- * stage2/char_io.c (get_cmdline): Search for a space or a equal
- character after the first word in CMDLINE when TAB lists
- completions, instead of just searching for a eqaul character.
- * stage2/cmdline.c (skip_to): Treat the character `=' as a space
- if AFTER_EQUAL is non-zero.
- (commands): Delete all the equal characters.
- * docs/menu.lst: Likewise.
- * docs/grub.texi: Likewise.
-
-1999-09-01 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/asmstub.c (env_for_exit): New variable.
- (grub_stage2): Do a setjmp in doit, and when it returns
- non-zero, set STATUS to 1 if ERRNUM is non-zero.
- (stop): Call longjmp instead of exit.
-
-1999-08-31 Pavel Roskin <pavel_roskin@geocities.com>
-
- * stage2/boot.c [GRUB_UTIL] (bsd_boot_entry): New function.
- (bsd_boot) [GRUB_UTIL]: Set ENTRY_ADDR to BSD_BOOT_ENTRY to fake
- the *BSD boot.
-
-1999-08-31 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/fsys_fat.c (fat_create_blocklist): Cast FAT_BUF to
- unsigned short * instead of unsigned long *. Suggested by Pavel
- Roskin.
-
-1999-08-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Edward Killips <ekillips@triton.net>:
- * stage2/cmdline.c (commands): Added hide and unhide.
- (enter_cmdline): Likewise.
- * stage2/disk_io.c (unhide_partition): New function.
- (hide_partition): Likewise.
- * stage2/pc_slice.h (PC_SLICE_TYPE_HIDDEN_FLAG): New macro.
-
-1999-08-29 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Pavel Roskin <pavel_roskin@geocities.com>:
- * stage2/fsys_minix.c (namelen): New variable.
- (MINIX_NAME_LEN): Deleted.
- (minix_mount): Set NAMELEN to 14 if SUPRTBLOCK->S_MAGIC is
- MINIX_SUPER_MAGIC, and set NAMELEN to 30 if it is
- MINIX_SUPER_MAGIC2.
- (minix_dir): Use NAMELEN instead of MINIX_NAME_LEN.
-
-1999-08-29 Pavel Roskin <pavel_roslin@geocities.com>
-
- * grub/Makefile.am, stage1/Makefile.am, stage2/Makefile.am:
- Avoid using variables inclosed in '@' because they cannot be
- overridden at the make time.
-
-1999-08-29 Pavel Roskin <pavel_roskin@geocities.com>
-
- * stage2/fsys_fat.c (fat_create_blocklist): Return 1 for the
- root directory on FAT12 and FAT16.
-
-1999-08-27 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/boot.c (load_image): Accept two arguments, KERNEL and
- ARG. And use them instead of CUR_CMDLINE.
- (load_module): Accept two arguments, MODULE and ARG. And use
- them instead of CUR_CMDLINE.
- (load_initrd): Accept one argument, INITRD. And use it instead
- of CUR_CMDLINE.
- (bsd_boot): Accept one additional argument, ARG. And use it
- instead of CUR_CMDLINE.
- * stage2/cmdline.c (enter_cmdline): Use MB_CMDLINE instead of
- HEAP for the Multiboot command-line buffer.
- * stage2/shared.h (MB_CMDLINE_BUF): New macro.
- (MB_CMDLINE_BUFLEN): Likewise.
-
-1999-08-26 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/Makefile.am [GRUB_MAINT] (grub.8): The argument for the
- option --name is changed to "the grub shell".
- * docs/grub.8: Regenerated.
- * docs/grub.texi: Do not use the name "the Stage 2 emulator" any
- more. Use the name "the grub shell" instead.
-
-1999-08-26 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Klaus Reichl <klaus.reichl@alcatel.at>:
- * stage2/fsys_minix.c: New file.
- * stage2/size_test: Added a check for the size of minix_stage1_5.
- * stage2/Makefile.am (libgrub_a_SOURCES): Added fsys_minix.c.
- (libgrub_a_CFLAGS): Added -DFSYS_MINIX=1.
- (nodist_pkgdata_DATA): Added minix_stage1_5.
- (noinst_PROGRAMS): Added minix_stage1_5.exec.
- (stage2_exec_SOURCES): Added fsys_minix.c.
- (minix_stage1_5_exec_SOURCES): New variable.
- (minix_stage1_5_exec_CFLAGS): Likewise.
- (minix_stage1_5_exec_LDFLAGS): Likewise.
- * stage2/pc_slice.h (PC_SLICE_TYPE_MINIX): New macro.
- * stage2/disk_io.c (fsys_table) [FSYS_MINIX]: Added minix entry.
- * stage2/filesys.h [FSYS_MINIX] (FSYS_MINIX_NUM): Set to 1.
- [!FSYS_MINIX] (FSYS_MINIX_NUM): Set to 0.
- [!NUM_FSYS] (NUM_FSYS): Added FSYS_MINIX_NUM.
- * stage2/shared.h (STAGE2_ID_MINIX_STAGE1_5): New macro.
- [STAGE1_5 && FSYS_MINIX] (STAGE2_ID): Set to
- STAGE2_ID_MINIX_STAGE1_5.
- * grub/Makefile.am (AM_CFLAGS): Added -DFSYS_MINIX=1.
- * configure.in (--disable-minix): New option.
-
-1999-08-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Jochen Hoenicke <jochen@gnu.org>:
- * stage2/fat.h (FAT_BPB_FAT_SECTORS_16): New macro.
- (FAT_BPB_FAT_SECTORS_32): Likewise.
- (FAT_BPB_IS_FAT32): Likewise.
- (FAT_BPB_ROOT_DIR_CLUSTER): Likewise.
- (FAT_BPB_FAT_SECTORS): If FAT_BPB_FAT_SECTORS_16 returns
- a non-zero value, return it. Otherwise return
- FAT_BPB_FAT_SECTORS_32.
- (FAT_DIRENTRY_FIRST_CLUSTER): Corrected.
- * stage2/fsys_fat.c (root_dir): New variable.
- (fat_mount): Use the macro IS_PC_SLICE_TYPE_FAT instead of
- checking for each fs types directly.
- Omit the >64 sectors check.
- If the current fs type is FAT32, then set FAT_SIZE to 8 and
- get the root from BPB.
- (fat_create_blocklist): Use the macro SECTOR_SIZE instead of a
- magic number.
- (fat_dir): Set MAP to ROOT_DIR instead of -1.
- * stage2/pc_slice.h (PC_SLICE_TYPE_FAT32): New macro.
- (PC_SLICE_TYPE_FAT32_LBA): Likewise.
- (PC_SLICE_TYPE_FAT16_LBA): Likewise.
- (IS_PC_SLICE_TYPE_FAT): Likewise.
-
-1999-08-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/fsys_ffs.c (ffs_mount): Do not shift the fs type
- FS_BSDFFS. Reported by Takehiro Suzuki
- <takehiro@coral.ocn.ne.jp>.
- * stage2/fsys_fat.c (fat_mount): Do not shift the fs type
- FS_MSDOS.
-
-1999-08-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Pavel Roskin's patch that adds new options to disable arbitrary
- filesystems is heavily modified and applied.
-
- * configure.in (--disable-ext2fs): New option.
- (--disable-fat): Likewise.
- (--disable-ffs): Likewise.
- (FSYS_CFLAGS): New variable. Set to filesystems the user choose.
- * grub/Makefile.am (AM_CFLAGS): Added -DFSYS_EXT2FS=1,
- -DFSYS_FAT=1 and -DFSYS_FFS=1.
- * stage2/Makefile.am (libgrub_a_CFLAGS): Likewise.
- (stage2_exec_CFLAGS): Added @FSYS_CFLAGS@.
- * stage2/filesys.h
- [!(FSYS_FFS || FSYS_FAT || FSYS_EXT2FS)] (FSYS_FFS): Deleted.
- [!(FSYS_FFS || FSYS_FAT || FSYS_EXT2FS)] (FSYS_FAT): Likewise.
- [!(FSYS_FFS || FSYS_FAT || FSYS_EXT2FS)] (FSYS_EXT2FS): Likewise.
- * stage2/fsys_ext2fs.c [!FSYS_EXT2FS]: Do not define anything.
- * stage2/fsys_fat.c [!FSYS_FAT]: Likewise.
- * stage2/fsys_ffs.c [!FSYS_FFS]: Likewise.
-
-1999-08-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage1/stage1_lba.S: Use STAGE1_DRP_ADDR for the address of
- drive parameters instead of DRIVE_PARAMETER.
- (drive_parameter): Deleted.
- * stage1/stage1.h (STAGE1_DRP_ADDR): New macro.
- (STAGE1_DRP_SIZE): Likewise.
-
-1999-08-11 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/bios.c (get_diskinfo): In LBA mode, set TOTAL_SECTORS
- to the low 32bits of DRP.TOTAL_SECTORS instead of the multiple
- of CHS.
- * stage2/cmdline.c (enter_cmdline) [GRUB_UTIL]: In the command
- "geometry", print the device file name instead of CHS/LBA
- information.
- * stage2/shared.h (device_map): Declared.
- * grub/asmstub.c (device_map): Defined as a global variable
- instead of a local variable.
-
-1999-08-10 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Support the NetBSD and OpenBSD partition slices.
-
- * stage2/pc_slice.h (PC_SLICE_TYPE_BSD): Deleted.
- (PC_SLICE_TYPE_FREEBSD): New macro.
- (PC_SLICE_TYPE_OPENBSD): Likewise.
- (PC_SLICE_TYPE_NETBSD): Likewise.
- (IS_PC_SLICE_TYPE_BSD_WITH_FS): Likewise.
- (IS_PC_SLICE_TYPE_BSD): Likewise.
- * stage2/fsys_ffs.c (ffs_mount): Use the macro
- IS_PC_SLICE_TYPE_BSD_WITH_FS instead of checking if
- CURRECT_SLICE is equal to the BSD partition type directly.
- * stage2/fsys_ext2fs.c (ext2fs_mount): Likewise.
- * stage2/fsys_fat.c (fat_mount): Likewise.
- * stage2/disk_io.c (check_BSD_parts): Set the low bits of
- CURRENT_SLICE to PC_SLICE_TYPE_FREEBSD instead of
- PC_SLICE_TYPE_BSD.
- (real_open_partition): Use the macro IS_PC_SLICE_TYPE_BSD instead
- of checking if CURRENT_SLICE is equal to the BSD partition type
- directly.
-
-1999-08-09 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/cmdline.c (commands): Added geometry.
- (enter_cmdline): If CUR_HEAP has the string "geometry", print
- out the information about a drive that the argument represents.
-
-1999-08-09 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/stage2.c (run_menu): Terminate the string PASSWORD
- before checking if ENTERED is identical to PASSWORD. Reported
- by Mark Lundeberg <aa026@pgfn.bc.ca>.
-
-1999-08-08 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/stage2.c (set_line_normal): New function.
- (set_line_highlight): Likewise.
- (run_menu): Do not call the function set_line directly any
- longer, call set_line_normal and set_line_highlight instead.
-
- From Pavel Roskin:
- * stage2/stage2.c (run_menu) [GRUB_UTIL]: Quit when pushing the
- key `q'.
-
-1999-08-05 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * acinclude.m4 (grub_ASM_PREFIX_REQUIREMENT): New function.
- * configure.in: Call grub_ASM_PREFIX_REQUIREMENT, and define
- ADDR32 and DATA32 based on the result.
- * stage2/asm.S: Replace addr32 and data32 prefixes with ADDR32
- and DATA32 respectively.
-
-1999-08-05 Pavel Roskin <pavel_roskin@geocities.com>
-
- * stage2/boot.c (load_image): Use RAW_ADDR macro when loading
- an a.out kernel.
-
-1999-08-04 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/asm.S: Make each of the addr32 and data32 prefixes
- appear in the same line as it modifies, as the gas manual in
- binutils-2.9.5.0.4 says "it must be in the same line".
-
-1999-08-04 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * boot.c (load_image): Fix a strcmp test. Reported by Pavel
- Roskin <pavel_roskin@geocities.com>.
-
-1999-08-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From "Dan J. Walters" <djw@cs.utexas.edu>:
- * stage2/i386-elf.h (EI_BRAND): New macro.
- * stage2/boot.c (load_image): If the kernel is ELF, check if it
- is a FreeBSD kernel as well as a Multiboot kernel, and if it is
- a FreeBSD kernel, then mask ENTRY_ADDR since FreeBSD requires
- that. Likewise, mask MEMADDR.
- (bsd_boot): Set the bi_symtab and the bi_esymtab members of BI
- only if MBI.FLAGS has the flag MB_INFO_AOUT_SYMS. Otherwise,
- clear them.
-
-1999-07-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Pavel Roskin <pavel_roskin@geocities.com>:
- * grub/getopt.c: New file. Copied from texinfo-3.12n.
- * grub/getopt1.c: Likewise.
- * grub/getopt.h: Likewise.
- * grub/Makefile.am (grub_SOURCES): Added getopt.c, getopt1.c and
- getopt.h.
- * configure.in: Check for string.h and strings.h.
- * grub/asmstub.c (grub_stage2): Fix a misordering in the output
- format of the inline assembly.
-
-1999-07-30 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Pavel Roskin <pavel_roskin@geocities.com>:
- * stage2/asm.S (get_diskinfo_standard): If the number of sectors
- returned is zero, then return an error code, even if non-carrier.
-
-1999-07-15 Gordon Matzigkeit <gord@zen.fig.org>
-
- * docs/Makefile.am (grub.info): Use an ugly hack to downgrade
- grub.texi so that it works with Debian's version of texinfo.
-
-1999-07-26 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/bios.c (get_diskinfo): When DRIVE is a floppy drive,
- try standard probe routine at first. Reported by Peter Astrand
- <altic@lysator.liu.se>.
-
- * grub/main.c (main): Call printf instead of grub_printf.
- Reported by Klaus Reichl <a8709182@unet.univie.ac.at>.
-
-1999-07-15 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/cmdline.c (skip_to): Don't increase CMDLINE if the
- character to which CMDLINE points is NUL.
-
- * stage2/Makefile.am (EXTRA_DIST): Removed smp-imps.c.
- (stage2_exec_SOURCES): Added smp-imps.c.
- * stage2/cmdline.c [!GRUB_UTIL] (IMPS_DEBUG) (KERNEL_PRINT)
- (CMOS_WRITE_BYTE) (CMOS_READ_BYTE) (PHYS_TO_VIRTUAL)
- (VIRTUAL_TO_PHYS) (inb) (outb) (cmos_write_byte)
- (cmos_read_byte): These are now defined in ...
- * stage2/smp-imps.c (IMPS_DEBUG) (KERNEL_PRINT)
- (CMOS_WRITE_BYTE) (CMOS_READ_BYTE) (PHYS_TO_VIRTUAL)
- (VIRTUAL_TO_PHYS) (inb) (outb) (cmos_write_byte)
- (cmos_read_byte): ... here.
- * stage2/cmdline.c [!GRUB_UTIL]: Include apic.h and smp-imps.h.
-
-1999-07-14 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- The function ungetch is simulated so that the user can use a
- buggy curses.
-
- * grub/asmstub.c [HAVE_LIBCURSES] (save_char): New variable.
- (getkey) [HAVE_LIBCURSES]: If SAVE_CHAR is not ERR, return
- SAVE_CHAR and clear it.
- (checkkey) [HAVE_LIBCURSES]: If SAVE_CHAR is not ERR, return
- SAVE_CHAR. If C is not ERR, set SAVE_CHAR to C.
-
-1999-07-14 Pavel Roskin <pavel_roskin@geocities.com>
-
- * stage2/char_io.c (get_cmdline) [GRUB_UTIL]: Recognize
- backspace when ncurses fails to do this.
-
- * grub/asmstub.c (grub_stage2) [HAVE_LIBCURSES]: Call wtimeout
- instead of nodelay.
- (getkey) [HAVE_LIBCURSES]: Likewise.
-
-1999-07-14 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage1/stage1_lba.S (probe_values): New variable. This is not
- used actually, but prevents `install' command from failing
- bogusly.
-
-1999-07-14 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- All constants in stage1s are moved to stage1.h and renamed
- appropriately, and include stage1.h instead.
-
- * grub/Makefile.am (AM_CFLAGS): Added the include path to stage1.
- * stage2/Makefile.am (INCLUDES): New variable.
- * stage1/Makefile.am (stage1_exec_SOURCES): Added stage1.h
- (stage1_lba_exec_SOURCES): Likewise.
- * stage1/stage1.h: New file.
- * stage1/stage1.S (SIGNATURE): Renamed to ...
- * stage1/stage1.h (STAGE1_SIGNATURE): ... this.
- * stage1/stage1.S (BPBEND): Renamed to ...
- * stage1/stage1.h (STAGE1_BPBEND): ... this.
- * stage1/stage1.S (PARTSTART): Renamed to ...
- * stage1/stage1.h (STAGE1_PARTSTART): ... this.
- * stage1/stage1.S (MINPARMSIZ): Renamed to ...
- * stage1/stage1.h (STAGE1_MINPARMSIZE): ... this.
- * stage1/stage1.S (LISTSIZ): Renamed to ...
- * stage1/stage1.h (STAGE1_LISTSIZE): ... this.
- * stage1/stage1.S (REALSTACK): Renamed to ...
- * stage1/stage1.h (STAGE1_STACKSEG): ... this.
- * stage1/stage1.S (BUFFERSEG): Renamed to ...
- * stage1/stage1.h (STAGE1_BUFFERSEG): ... this.
- * stage1/stage1.S (BIOS_HD_FLAG): Renamed to ...
- * stage1/stage1.h (STAGE1_BIOS_HD_FLAG): ... this.
- * stage1/stage1_lba.S (SIGNATURE): Removed.
- * stage1/stage1_lba.S (BPBEND): Likewise.
- * stage1/stage1_lba.S (PARTSTART): Likewise.
- * stage1/stage1_lba.S (MINPARMSIZ): Likewise.
- * stage1/stage1_lba.S (LISTSIZ): Likewise.
- * stage1/stage1_lba.S (REALSTACK): Likewise.
- * stage1/stage1_lba.S (BUFFERSEG): Likewise.
- * stage1/stage1_lba.S (BIOS_HD_FLAG): Likewise.
-
- * stage1/stage1.S (stage1_id): New variable.
- * stage1/stage1_lba.S (stage1_id): Likewise.
- * stage1/stage1.h (COMPAT_VERSION_MINOR): Set to 2.
- (STAGE1_ID_OFFSET): New macro.
- (STAGE1_ID_CHS): Likewise.
- (STAGE1_ID_LBA): Likewise.
- * stage2/cmdline.c (enter_cmdline) [!GRUB_UTIL]: When running
- the command `install' and STAGE1_FILE is stage1_lba, check if
- LBA is supported.
- (enter_cmdline) [GRUB_UTIL]: In the same case above, check only
- if CURRENT_DRIVE is a hard disk and, if so, print a warning
- message, because /sbin/grub cannot detect if LBA is supported or
- not.
-
- * stage1/stage1_lba.S: Fix a bug that incorrectly assigns the
- segment of buffer address.
-
-1999-07-13 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/boot.c (load_image): When removing "vga=...", memmove
- the length of VGA_END plus one.
-
-1999-07-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/bios.c (get_diskinfo): In LBA mode, compute
- TOTAL_SECTORS from DRP instead of GEOMETRY.
- Clear GEOMETRY->FLAGS first.
-
- * stage2/boot.c (load_image): Fix inverted lines.
-
-1999-07-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Support Linux video mode selection.
-
- * stage2/shared.h (LINUX_VID_MODE_OFFSET): New macro.
- (LINUX_VID_MODE_NORMAL): Likewise.
- (LINUX_VID_MODE_EXTENDED): Likewise.
- (LINUX_VID_MODE_ASK): Likewise.
- [!WITHOUT_LIBC_STUBS] (strlen): Likewise.
- (grub_strlen): Declared.
- * stage2/boot.c (load_image): Added Linux video mode selection.
- * stage2/char_io.c [!STAGE1_5] (grub_strlen): New function.
-
-1999-07-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/char_io.c (print_error): Print ERRNUM in the format of
- %u instead of %d.
- (convert_to_ascii) [STAGE1_5]: Eliminate the `x' and `d'
- handling code.
- (grub_printf): Declare FORMAT as `const char *'.
- (grub_printf) [STAGE1_5]: Eliminate the `x' and `d' handling
- code.
- (get_based_digit): Removed.
- (safe_parse_maxint): Remove unnecessary `register' prefixes,
- because GCC does better optimization.
- Declare DIGIT as `unsigned int' and calculate the value by more
- compact instructions.
- [!STAGE1_5] (grub_strncat): Declare S2 as `const char *'.
- [!STAGE1_5] (grub_strcmp): Declare S1 and S2 as `const char *'.
- [!STAGE1_5] (grub_strstr): Likewise.
- (grub_memmove): Declare FROM as `const char *'.
- The copy code is replaced with inline assembly code stolen from
- Linux-2.2.2.
-
- * stage2/shared.h (grub_printf) : Corrected.
- (grub_strncat): Likewise.
- (grub_memmove): Likewise.
- (grub_strstr): Likewise.
- (grub_strcmp): Likewise.
-
-1999-07-11 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage1/stage1.S (sectors): Change the size to long.
- (heads): Likewise.
- (sector_start): New variable.
- (head_start): Likewise.
- (cylinder_start): Likewise.
- (final_init): Set %si to SECTORS first, and use %si for memory
- references.
- Zero %eax so that the high 16 bits are always zero.
- Set %di to FIRSTLIST - LISTSIZ instead of FIRSTLIST.
- (bootloop): Omit the complex CHS recomputation, and always
- compute them from LBA address instead.
- Call 32bits div instructions instead of 16bits div instructions.
- Update the position where to load data from at the end of this
- loop, instead of the beginning.
-
- * stage1/stage1_lba.S: New file.
- * stage1/Makefile.am (nodist_pkgdata_DATA): Added stage1_lba.
- (LDFLAGS): New variable.
- (noinst_PROGRAMS): Added stage1_lba.exec.
- (stage1_lba_exec_SOURCES): New variable.
- (%: %.exec): New rule.
-
-1999-06-28 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/main.c (main): The third argument for strtoul is changed
- to 0 in the case where an option is OPT_INSTALL_PARTIION.
- Reported by Pavel Roskin <pavel_roskin@geocities.com>.
-
-1999-06-27 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/shared.h (STAGE2_STAGE2_ID): New macro.
- (STAGE2_VER_STR_OFFS): Set to 0xd.
- (STAGE2_ID_STAGE2): New macro.
- (STAGE2_ID_FFS_STAGE1_5): Likewise.
- (STAGE2_ID_E2FS_STAGE1_5): Likewise.
- (STAGE2_ID_FAT_STAGE1_5): Likewise.
- (STAGE2_ID) [!STAGE1_5]: Defined as STAGE2_ID_STAGE2.
- (STAGE2_ID) [STAGE1_5] [FSYS_FFS]: Defined as
- STAGE2_ID_FFS_STAGE1_5.
- (STAGE2_ID) [STAGE1_5] [FSYS_EXT2FS]: Defined as
- STAGE2_ID_STAGE1_5.
- (STAGE2_ID) [STAGE1_5] [FSYS_FAT]: Defined as
- STAGE2_ID_FAT_STAGE1_5.
- (COMPAT_VERSION_MINOR): Set to 1.
- * stage2/asm.S (stage2_id): New variable.
- * stage1/stage1.S: Change the minor version to 1.
-
-1999-06-27 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * configure.in (CFLAGS): Set to "-g", since only this flag is
- always sharable.
- (STAGE1_CFLAGS): Set to "-O2", and AC_SUBST this.
- (GRUB_CFLAGS): Likewise.
- (saved_CFLAGS): New variable for temporarily saving CFLAGS.
- (STAGE2_CFLAGS): Set to "-Os" if this option is available,
- otherwise set to "-fno-strength-reduce -fno-unroll-loops",
- and then AC_SUBST this.
- * grub/Makefile.am (AM_CFLAGS): Prepended @GRUB_CFLAGS@.
- * stage1/Makefile.am (AM_CFLAGS): Prepended @STAGE1_CFLAGS@.
- * stage2/Makefile.am (libgrub_a_CFLAGS): Prepened @GRUB_CFLAGS@.
- (STAGE2_COMPILE): Prepended @STAGE2_CFLAGS@.
-
- * stage2/asm.S (chain_stage2): Pass CURRENT_PARTITION and
- CURRENT_DRIVE, instead of INSTALL_PARTITION and BOOT_DRIVE.
-
-1999-06-27 Pavel Roskin <pavel_roskin@geocities.com>
-
- * configure.in: set CFLAGS to "-Os -g" for compilers which
- understand "-Os" if CFLAGS is not already set. Use
- "-O2 -fno-strength-reduce -fno-unroll-loops -g" for older gcc
- versions.
-
-1999-06-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage2/disk_io.c (attempt_mount) [STAGE1_5]: Set FSYS_TYPE to
- 0, and set it to NUM_FSYS if mount fails.
- (real_open_partition): Call rawread in Stage 1.5 as well.
-
-1999-06-24 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * Makefile.am (SUBDIRS): Change the order of the directories so
- that a directory will be made after the dependent directories
- are made. `grub' depends on `stage2', and `docs' depends on
- `grub'. Do not make in parallel.
- * docs/help2man: Copied from help2man-1.012, which contains my
- previous change.
- * docs/grub.8: Regenerated.
-
-1999-06-24 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Build process is cleaned up. Stage 2 and Stage 1.5's are all
- built in the directory stage2.
-
- From Pavel Roskin <pavel_roskin@geocities.com>:
- * Makefile.am (SUBDIRS): e2fs_stage1_5, ffs_stage1_5,
- fat_stage1_5 and shared_src are removed.
- (DISTCLEANFILES): Deleted.
- * configure.in: Call AC_PROG_RANLIB.
- (AC_INIT): Change the argument to stage2/stage2.c.
- (LIBS): Renamed to ...
- (GRUB_LIBS): ... this, and call AC_SUBST for this.
- Our own rules are removed.
- (AC_OUTPUT): e2fs_stage1_5/Makefile, ffs_stage1_5/Makefile,
- fat_stage1_5/Makefile and shared_src/Makefile are removed.
- * docs/Makefile.am (HELP2MAN): The prefix $(srcdir) is removed.
- [GRUB_MAINT]: Prepend $(srcdir) to $(HELP2MAN).
- * e2fs_stage1_5/Makefile.am: Deleted.
- * e2fs_stage1_5/Makefile.in: Likewise.
- * fat_stage1_5/Makefile.am: Likewise.
- * fat_stage1_5/Makefile.in: Likewise.
- * ffs_stage1_5/Makefile.am: Likewise.
- * ffs_stage1_5/Makefile.in: Likewise.
- * grub/Makefile.am (CLEANFILES): Likewise.
- (COMPILE): Likewise.
- (INCLUDES): Likewise.
- (DEP_FILES): Likewise.
- (@SHARED_SRC_RULES@): Likewise.
- (AM_CFLAGS): New variable.
- (grub_LDADD): Set to the library libgrub.a and @GRUB_LIBS@.
- * shared_src/Makefile.am: Deleted.
- * shared_src/Makefile.in: Likewise.
- * shared_src/apic.h: Moved to ...
- * stage2/apic.h: ... here.
- * shared_src/asm.S: Moved to ...
- * stage2/asm.S: ... here.
- * shared_src/bios.c: Moved to ...
- * stage2/bios.c: ... here.
- * shared_src/boot.c: Moved to ...
- * stage2/boot.c: ... here.
- * shared_src/char_io.c: Moved to ...
- * stage2/char_io.c: ... here.
- * shared_src/cmdline.c: Moved to ...
- * stage2/cmdline.c: ... here.
- * shared_src/common.c: Moved to ...
- * stage2/common.c: ... here.
- * shared_src/defs.h: Moved to ...
- * stage2/defs.h: ... here.
- * shared_src/dir.h: Moved to ...
- * stage2/dir.h: ... here.
- * shared_src/disk_inode.h: Moved to ...
- * stage2/disk_inode.h: ... here.
- * shared_src/disk_inode_ffs.h: Moved to ...
- * stage2/disk_inode_ffs.h: ... here.
- * shared_src/disk_io.c: Moved to ...
- * stage2/disk_io.c: ... here.
- * shared_src/fat.h: Moved to ...
- * stage2/fat.h: ... here.
- * shared_src/filesys.h: Moved to ...
- * stage2/filesys.h: ... here.
- * shared_src/freebsd.h: Moved to ...
- * stage2/freebsd.h: ... here.
- * shared_src/fs.h: Moved to ...
- * stage2/fs.h: ... here.
- * shared_src/fsys_ext2fs.c: Moved to ...
- * stage2/fsys_ext2fs.c: ... here.
- * shared_src/fsys_fat.c: Moved to ...
- * stage2/fsys_fat.c: ... here.
- * shared_src/fsys_ffs.c: Moved to ...
- * stage2/fsys_ffs.c: ... here.
- * shared_src/gunzip.c: Moved to ...
- * stage2/gunzip.c: ... here.
- * shared_src/i386-elf.h: Moved to ...
- * stage2/i386-elf.h: ... here.
- * shared_src/imgact_aout.h: Moved to ...
- * stage2/imgact_aout.h: ... here.
- * shared_src/mb_header.h: Moved to ...
- * stage2/mb_header.h: ... here.
- * shared_src/mb_info.h: Moved to ...
- * stage2/mb_info.h: ... here.
- * shared_src/pc_slice.h: Moved to ...
- * stage2/pc_slice.h: ... here.
- * shared_src/shared.h: Moved to ...
- * stage2/shared.h: ... here.
- * shared_src/smp-imps.c: Moved to ...
- * stage2/smp-imps.c: ... here.
- * shared_src/smp-imps.h: Moved to ...
- * stage2/smp-imps.h: ... here.
- * shared_src/stage1_5.c: Moved to ...
- * stage2/stage1_5.c: ... here.
- * shared_src/stage2.c: Moved to ...
- * stage2/stage2.c: ... here.
- * stage1/Makefile.am (pkgdata_DATA): Renamed to ...
- (nodist_pkgdata_DATA): ... this.
- (COMPILE): Deleted.
- (AM_CFLAGS): New variable.
- * stage2/Makefile.am: Completely rewritten from scratch.
- (TESTS): New variable.
- (noinst_SCRIPTS): Likewise.
- (noinst_HEADERS): Likewise.
- (EXTRA_DIST): Set to smp-imps.c and $(noinst_SCRIPTS).
- (noinst_LIBRARIES): New variable.
- (libgrub_a_SOURCES): Likewise.
- (libgrub_a_CFLAGS): Likewise.
- (pkgdata_DATA): Deleted.
- (nodist_pkgdata_DATA): New variable.
- (MOSTLYCLEANFILES): Set to $(noinst_PROGRAMS).
- (COMPILE): Deleted.
- (INCLUDES): Likewise.
- (stage2_exec_LDADD): Likewise.
- (DEP_FILES): Likewise.
- (stage2_exec_SOURCES): Set to the actual source files instead of
- dummy.
- (DISTFILES): Deleted.
- (stage2.exec): Likewise.
- (stage2): Likewise.
- (@SHARED_SRC_RULES@): Likewise.
- (noinst_PROGRAMS): Set to executable formats of Stage 2 and
- Stage 1.5's.
- (STAGE2_LINK): New variable.
- (STAGE2_COMPILE): Likewise.
- (STAGE1_5_LINK): Likewise.
- (STAGE1_5_COMPILE): Likewise.
- (stage2_exec_CFLAGS): Likewise.
- (stage2_exec_LDFLAGS): Likewise.
- (e2fs_stage1_5_exec_SOURCES): Likewise.
- (e2fs_stage1_5_exec_CFLAGS): Likewise.
- (e2fs_stage1_5_exec_LDFLAGS): Likewise.
- (fat_stage1_5_exec_SOURCES): Likewise.
- (fat_stage1_5_exec_CFLAGS): Likewise.
- (fat_stage1_5_exec_LDFLAGS): Likewise.
- (ffs_stage1_5_exec_SOURCES): Likewise.
- (ffs_stage1_5_exec_CFLAGS): Likewise.
- (ffs_stage1_5_exec_LDFLAGS): Likewise.
- (% : %.exec): New rule.
-
- * stage2/size_test: New file, for checking for the sizes of
- Stage 2 and Stage 1.5's.
-
-1999-06-24 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * stage1/stage1.S: Call testb instead of andb when checking if
- the drive is a floppy.
-
-1999-06-23 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/asmstub.c [__linux__]: Include linux/fs.h for BLKFLSBUF.
- (grub_stage2): Call sync before and after calling doit.
- (gurb_stage2) [__linux__]: Invalidate buffer caches by BLKFLSBUF
- ioctl.
- * grub/main.c (main): Call sync first. Suggested by Pavel Roskin
- <pavel_roskin@geocities.com>.
-
- * configure.in: Curses libraries are always checked.
- (--enable-sbin-grub): Deleted. Now /sbin/grub is always built.
- (--enable-maintainer-mode): New option.
- * grub/Makefile.am (EXTRA_PROGRAMS): Deleted.
- (sbin_PROGRAMS): Just set to grub.
- * docs/Makefile.am (man_MANS): New variable.
- (HELP2MAN): Likewise.
- (noinst_SCRIPTS): Likewise.
- (EXTRA_DIST): Add $(man_MANS) and $(noinst_SCRIPTS).
- [GRUB_MAINT]: Define the rule for the /sbin/grub manual.
- * docs/help2man: Copied from texinfo-3.12i.
- (--section): New option to specify which section a manual
- belongs to.
- (opt_section): New variable.
- (section): Likewise.
- * docs/grub.8: Produced by help2man automatically.
-
-1999-06-22 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * shared_src/char_io.c (get_cmdline): Add two missing `break's.
-
- * shared_src/cmdline.c (commands): Add quit.
- (enter_cmdline): Change the return type to cmdline_t, and return
- CMDLINE_OK if successful, otherwise CMDLINE_ERROR if fail.
- (enter_cmdline) [GRUB_UTIL]: Return CMDLINE_ABORT if CUR_HEAP
- contains "quit".
- [!GRUB_UTIL]: Just print an annotation message.
- * shared_src/shared.h (cmdline_t): New enum type.
- (enter_cmdline): Change the return type to cmdline_t.
- (cmain): Remove ``noreturn'' attribute.
- * shared_src/stage2.c (menu_t): New enum type.
- (run_menu): Change the return type to menu_t.
- If enter_cmdline returns CMDLINE_ABORT, then return MENU_ABORT,
- otherwise return MENU_OK.
- (cmain): If enter_cmdline aborts, then break the command-line
- loop and return. If run_menu aborts, then return.
-
-1999-06-22 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * shared_src/Makefile.am (EXTRA_DIST): Add bios.c. Reported by
- Pavel Roskin <pavel_roskin@geocities.com>.
-
-1999-06-21 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
+1999-06-21 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* docs/Makefile.am (html): Deleted.
(txt): Likewise.
* docs/embedded_data.txt: Likewise.
* docs/filesystem.txt: Likewise.
-1999-06-21 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- From Alexander K. Hudek <alexhudek@home.com>:
- * shared_src/disk_io.c (real_open_partition): Check if
- CURRENT_SLICE is equal to PC_SLICE_TYPE_WIN95_EXTENDED as well.
- * shared_src/pc_slice.c (PC_SLICE_TYPE_WIN95_EXTENDED): New
- macro.
- * shared_src/bios.c (biosdisk): Clear the reserved member of DAP.
-
-1999-06-08 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Color-menu support based on Peter Astrand
- <altic@lysator.liu.se>'s patch.
-
- * shared_src/asm.S (nocursor): New function.
- * shared_src/cmdline.c (normal_color): New variable.
- (highlight_color): Likewise.
- (commands): Added "color" command.
- (enter_cmdline): Handle the color command.
- * shared_src/shared.h (normal_color): Declared.
- (highlight_color): Likewise.
- [!GRUB_UTIL] (nocursor): Likewise.
- * shared_src/stage2.c (print_border) [!GRUB_UTIL]: Color the
- menu.
- (run_menu) [!GRUB_UTIL]: Call nocursor, and call set_line with
- the second argument HIGHLIGHT_COLOR when highlighting a line,
- and NORMAL_COLOR when drawing a normal line.
- (cmain): Initialize normal_color and highlight_color. Handle
- the color command in the same way as the command-line
- interface.
-
-1999-06-07 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * e2fs_stage1_5/Makefile.am (IMPORTANT_SIZE_LIMIT): Set to 31744.
- * fat_stage1_5/Makefile.am (IMPORTANT_SIZE_LIMIT): Likewise.
-
-1999-06-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- The debug version of Stage 2 is removed.
-
- * shared_src/cmdline.c: The imps code is now defined if GRUB_UTIL
- is not defined, but not if DEBUG.
- (debug): New global variable.
- (commands): All commands are always enabled, and added "debug".
- (debug_fs_print_func): Defined unconditionally.
- (debug_fs_blocklist_func): If DEBUG is true, then call printf.
- (enter_cmdline): Handle "testload", "read", "fstest",
- "impsprobe" and "displaymem" unconditionally, and added "debug"
- handling.
- [GRUB_UTIL]: If a command is impsprobe, just fails.
- * shared_src/disk_io.c (devread) [!STAGE1_5]: If DEBUG_FS and
- DEBUG are true, then call printf.
- * shared_src/asm.S (patch_code): Defined unconditionally.
- (patch_code_end): Likewise.
- * stage1/stage1.S (firstlist) [!FFS_STAGE1_5]: Increase the
- number of sectors to 90, because Stage 2 is larger than 80
- sectors.
- * configure.in: The option --enable-debug is removed, and do
- not output "stage2_debug/Makefile".
- * Makefile.am (SUBDIRS): stage2_debug is removed.
- * stage2_debug/Makefile.am: Deleted.
- * stage2_debug/Makefile.in: Likewise.
-
-1999-06-02 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/main.c (verbose): New variable.
- (read_only): Likewise.
- (OPT_VERBOSE): New macro.
- (OPT_READ_ONLY): Likewise.
- (longopts): Add --read-only and --verbose options.
- (usage): Add the descriptions about --read-only and --verbose.
- (main): Handle OPT_VERBOSE and OPT_READ_ONLY.
- If HOLD and VERBOSE are non-zero, then display the message
- about how to restart /sbin/grub.
-
- * shared_src/shared.h (verbose) [GRUB_UTIL]: Declared.
- (read_only) [GRUB_UTIL]: Likewise.
-
- * grub/asmstub.c (hex_dump): New function.
- (biosdisk): In the case where SUBFUNC is
- BIOSDISK_WRITE, check for READ_ONLY and call nwrite if
- READ_ONLY is zero. If VERBOSE is non-zero, display what GRUB
- will try to do.
- (get_diskinfo): Open DEVNAME with the mode O_RDWR if READ_ONLY
- is zero, and attempt to open DEVNAME with the mode O_RDONLY
- regardless of ERRNO if READ_ONLY is non-zero. If VERBOSE is
- non-zero, then display the drive DRIVE and the file DEVNAME.
-
- * shared_src/disk_io.c (set_device) [STAGE1_5]: Eliminate
- completion code.
-
-1999-06-01 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/asmstub.c: Do not use I_AM_VERY_BRAVE any more.
- (grub_stage2): Delete first_scsi_disk and add a variable
- num_hd, which is used for counting how many drives are
- detected.
- Initialize the flags member of each element of disks to -1
- instead of 0, and check if it is equal to -1 instead of 0 when
- close it.
- (get_diskinfo): Treat -1 as non-caching state instead of 0.
-
-1999-06-01 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Reported from Klaus Reichl <a8709182@unet.univie.ac.at>:
- * docs/.cvsignore: New file.
- * shared_src/disk_io.c (print_a_completion): New function
- which saves what has been printed to UNIQUE_STRING and printf
- it.
- (unique) [!STAGE1_5]: New variable.
- (unique_string): Likewise.
- (print_completions): Use print_a_completion, and improve the
- completion facility.
- * shared_src/fsys_ext2fs.c (ext2fs_dir) [!STAGE1_5]: Use
- print_a_completion instead of just printf.
- * shared_src/fsys_ffs.c (ffs_dir) [!STAGE1_5]: Likewise.
- * shared_src/fsys_fat.c (fat_dir) [!STAGE1_5]: Likewise.
- * shared_src/shared.h (print_a_completion): Declared.
- * shared_src/cmdline.c (enter_cmdline): Explicitly cast
- int to pointer to char for grub_read.
- * grub/asmstub.c (grub_stage2) [__linux__]: Don't use /dev/fd1.
- Probe 4 IDE drives instead of 2.
- (biosdisk) [__linux__]: Add a prototype for _llseek.
- * shared_src/char_io.c (get_cmdline): Update LPOS and LLEN_OLD
- when the functon print_completion modifies CMDLINE.
- * shared_src/stage2.c (get_line_from_config): Fix LITERAL
- handling.
-
-1999-05-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/asmstub.c (grub_stage2): Fix a memory leak that FP is
- not closed.
-
-1999-05-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/main.c: Replace OPT_DISABLE_CONFIG_FILE and
- OPT_DISABLE_CURSES with OPT_NO_CONFIG_FILE and OPT_NO_CURSES
- respectively.
- (longopts): Rename from "disable-config-file" to
- "no-config-file", and from "disable-curses" to "no-curses".
- (usage): Use "grub" instead of ARGV[0], read the standards.
- Change the help message according to the changes above.
- (main): Handle OPT_NO_CONFIG_FILE and OPT_NO_CURSES, instead
- of OPT_DISABLE_CONFIG_FILE and OPT_DISABLE_CURSES.
-
-1999-05-21 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/TODO: Moved to ...
- * TODO: ... here.
- * docs/BUGS: Moved to ...
- * BUGS: ... here.
- * docs/COPYING: Removed.
- * docs/Makefile.am (EXTRA_DIST): Get rid of BUGS.
- * Makefile.am (EXTRA_DIST): Set to BUGS.
-
-1999-05-17 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * acinclude.m4 (grub_ASM_EXT_C): Do not overrun the command
- shift. Reported by Pavel Roskin <pabel_roskin@geocities.com>.
-
1999-05-14 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
* docs/Makefile.am (info_TEXINFOS): Added multiboot.texi.
* docs/multiboot.texi: New file. From Kunihiro Ishiguro.
-
-1999-05-12 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/asmstub.c: Include <errno.h>. Reported by Kunihiro
- Ishiguro <kunihiro@zebra.org>.
-
-1999-05-11 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Reported by Brian Brunswick <brian@skarpsey.demon.co.uk>:
- * shared_src/asm.S (start) [STAGE1_5]: Jump to 0x0:0x2000.
- * shared_src/cmdline.c (enter_cmdline): Doesn't check for the jump
- address in stage2. We are not paranoid.
- Add a missing RAW_ADDR macro.
- * shared_src/diskio.c (grub_open): Call setup_part even in stage1.5.
- And, include necessary functions that were eliminated incorrectly.
- * shared_src/char_io.c [STAGE1_5]: Eliminate unnecessary functions
- for stage1.5.
-
- * grub/asmstub.c (nread): New function. Handle EINTR.
- (nwrite): Likewise.
- (biosdisk) [I_AM_VERY_BRAVE]: When SUBFUNC is BIOSDISK_WRITE, call
- nwrite.
-
- Reported by Pavel Roskin <pavel_roskin@geocities.com>:
- * shared_src/fsys_ext2fs.c (off_t): Renamed to ...
- (linux_off_t): ... this.
- * shared_src/defs.h (off_t): Renamed to ...
- (mach_off_t): ... this.
- * shared_src/fs.h (BBOFF): Use mach_off_t instead of off_t.
- (SBOFF): Likewise.
-
- * e2fs_stage1_5/Makefile.am (IMPORTANT_SIZE_LIMIT): Set to 81920.
- * fat_stage1_5/Makefile.am (IMPORTANT_SIZE_LIMIT): Likewise.
- * ffs_stage1_5/Makefile.am (IMPORTANT_SIZE_LIMIT): Set to 7168.
-
-1999-05-03 Gordon Matzigkeit <gord@trick.fig.org>
-
- From Pavel Roskin:
- * shared_src/shared.h: Redeclare.
-
- * grub/main.c (main): Use strncpy rather than pointer assignment
- to set the config file name.
-
- * grub/asmstub.c: Make config_file a static array, not a pointer.
- Correct the value of VERSION_STRING.
-
-1999-04-10 Gordon Matzigkeit <gord@trick.fig.org>
-
- * debian/rules (build): Install into /lib instead of /share.
-
-1999-05-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- Preliminary non-interactive use support.
-
- * grub/main.c (use_config_file): New variable.
- (use_curses): Likewise.
- (OPT_DISABLE_CONFIG_FILE): New constant.
- (OPT_DISABLE_CURSES): Likewise.
- (OPT_BATCH): Likewise.
- (longopts): Add new options, --disable-config-file, --disable-curses,
- and --batch.
- (usage): Print the help messages about these new options.
- (main): Handle them.
-
- * grub/asmstub.c (grub_stage2) [HAVE_LIBCURSES]: If ! USE_CURSES,
- fallback non-curses code.
- (stop) [HAVE_LIBCURSES]: Likewise.
- (cls) [HAVE_LIBCURSES]: Likewise.
- (getxy) [HAVE_LIBCURSES]: Likewise.
- (gotoxy) [HAVE_LIBCURSES]: Likewise.
- (grub_putchar) [HAVE_LIBCURSES]: Likewise.
- (getkey) [HAVE_LIBCURSES]: Likewise.
- (checkkey) [HAVE_LIBCURSES]: Likewise.
- (set_attrib) [HAVE_LIBCURSES]: Likewise.
-
- * shared_src/cmdline.c (enter_cmdline): Do not use getc, but use
- getkey.
-
- * shared_src/stage2.c (cmain) [GRUB_UTIL]: Check if USE_CONFIG_FILE
- is non-zero or not.
-
- * shared_src/shared.h (getc): Removed.
- (use_config_file) [GRUB_UTIL]: Add the declaration.
- (use_curses) [GRUB_UTIL]: Likewise.
-
-1999-05-02 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * shared_src/asm.S (biosdisk_standard): Pop %ebp correctly, reported
- by Pavel Roskin <pavel_roskin@geocities.com>.
-
-1999-04-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/menu.lst: Rewritten, so that it contains up-to-date
- information and FAQish configuration examples.
-
-1999-04-09 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * shared_src/asm.S (get_diskinfo_floppy): Correct the number of heads
- and the one of cylinders.
-
-1999-04-06 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/asmstub.c (get_diskinfo): Compute the total number of sectors
- for DRIVE.
-
- * shared_src/asm.S (get_diskinfo_standard): Clear the data segment
- after calling int 0x13. Restore the base pointer after returning
- to protected mode.
- (get_diskinfo_floppy): Likewise.
-
- * shared_src/bios.c (get_diskinfo): Always set the size of DRP to
- the max size of DRP, regardless of the major version of extensions.
-
-1999-04-03 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * shared_src/shared.h (struct geometry): Declare total_sectors as
- unsigned long instead of unsigned long long, because GRUB represents
- a sector number by 4bytes integer, so it doesn't make sense.
-
- * shared_src/bios.c (biosdisk) [!NO_INT13_FALLBACK]: Recompute
- TOTAL_SECTORS according to CHS information.
- (get_diskinfo) [DEBUG]: Print the geometry of DRIVE.
-
- * shared_src/disk_io.c (real_open_partition): Set PART_LENGTH to
- BUF_GEOM.TOTAL_SECTORS.
-
-1999-04-01 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * docs/texinfo.tex: Copied from automake-1.4a.
-
- * configure.in (SHARED_SRC_RULES): Add bios into shared sources.
-
- * e2fs_stage1_5/Makefile.am (e2fs_stage1_5_exec_LDADD): Added bios.o.
- * fat_stage1_5/Makefile.am (fat_stage1_5_exec_LDADD): Likewise.
- * ffs_stage1_5/Makefile.am (ffs_stage1_5_exec_LDADD): Likewise.
- * stage2/Makefile.am (stage2_exec_LDADD): Likewise.
- * stage2_debug/Makefile.am (stage2_debug_exec_LDADD): Likewise.
-
- * shared_src/Makefile.am (EXTRA_DIST): Added bios.c.
-
- * shared_src/asm.S (biosdisk): Deleted. Now defined in bios.c.
- (get_diskinfo): Likewise.
- (biosdisk_int13_extensions): New function.
- (biosdisk_standard): Likewise.
- (check_int13_extensions): Likewise.
- (get_diskinfo_int13_extensions): Likewise.
- (get_diskinfo_standard): Likewise.
- (get_diskinfo_floppy): Likewise.
-
- * shared_src/bios.c: New file.
-
- * shared_src/shared.h (struct geometry): Added new member,
- total_sectors.
-
-1999-03-28 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * shared_src/stage2.c (print_entries): Correctly assign MENU_ENTRIES
- the entries starting from FIRST.
-
-1999-03-27 Gordon Matzigkeit <gord@trick.fig.org>
-
- * Change everything to use memset and memmove instead of bzero and
- bcopy. GNB's Not BSD.
-
- * shared_src/shared.h (grub_memset): Adapted from grub_bzero.
- (grub_memmove): Adapted from grub_bcopy.
-
- * grub/asmstub.c (checkkey): Fix unterminated comment.
-
- * shared_src/char_io.c (grub_printf): Renamed from printf.
- (grub_tolower): Renamed from tolower.
- (grub_isspace): Renamed from isspace.
- (grub_strncat): Renamed from strncat.
- (grub_strstr): Renamed from strstr.
- (grub_bcopy): Renamed from bcopy.
- (grub_bzero): Renamed from bzero.
-
- From Bradford Hovinen:
- * shared_src/char_io.c (get_cmdline): Add new argument to hide
- password entry.
- (grub_strcmp): New function.
- * shared_src/shared.h (get_cmdline): Fix declaration.
- (grub_strcmp): Declare.
- * shared_src/stage2.c (run_menu): Use get_cmdline with an
- ECHO_CHAR of `*'. This protects against both brute-force and
- sidelong-glance password cracking attempts.
-
- * grub/main.c (usage): Display defaults for stage2 options.
-
- * grub/asmstub.c [WITHOUT_LIBC_STUBS]: Renamed from
- NO_REMAPPING_LIBC_FUNCTIONS.
- * grub/main.c: Likewise.
- * shared_src/shared.h: Likewise.
-
-1999-03-27 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/asmstub.c (set_attrib): Use inch and addch, instead of
- chgat, because chgat doesn't work as expected.
-
-1999-03-26 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * grub/asmstub.c (grub_stage2) [HAVE_LIBCURSES]: Call nodelay.
- (checkkey) [HAVE_LIBCURSES]: If getting an input character, then
- ungetch it, because checkkey shouldn't modify the input queue.
-
- Use file descriptors instead of file pointers to support
- >4GB disks in Linux.
-
- * grub/asmstub.c (grub_stage2): Call close instead of fclose.
- (get_diskinfo): Call open instead of fopen.
- (biosdisk) [__linux__]: Use _llseek instead of lseek.
- (biosdisk): Call read instead of fread.
-
- Add options so that the user can specify the config file.
-
- * grub/Makefile.am (CPPFLAGS): Use -fwritable-strings, because
- grub assumes that all strings resides at the data section.
-
- * grub/main.c: Define NO_REMAPPING_LIBC_FUNCTIONS before including
- shared.h.
- (OPT_CONFIG_FILE): New macro.
- (OPT_INSTALL_PARTITION): Likewise.
- (OPT_BOOT_DRIVE): Likewise.
- (longopts): Add new options, config-file, install-partition and
- boot-drive.
- (usage): Add the documentation for them.
- (main): Add handling code for OPT_CONFIG_FILE, OPT_INSTALL_PARTITION
- and OPT_BOOT_DRIVE.
-
- * grub/asmstub.c: Define NO_REMAPPING_LIBC_FUNCTIONS before including
- shared.h.
- (config_file): Make it char * instead of char [].
- (getrtsecs): Return current time instead of 0xff.
-
- * shared_src/shared.h [NO_REMAPPING_LIBC_FUNCTIONS]: Don't define
- libc-API-compatible function names.
- (config_file): Change the prototype from char [] to char *.
- (grub_putchar): Renamed from putchar.
-
-1999-03-25 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * char_io.c (get_cmdline): Call cl_setcpos even if lpos == llen,
- because ncurses won't update the cursor position.
-
- * grub/main.c (OPT_HOLD): New macro.
- (longopts): New option --hold.
- (usage): Add the documentation about --hold.
- (main): Set hold if --hold is specified. Wait until cleared.
-
-1999-03-22 Gordon Matzigkeit <gord@trick.fig.org>
-
- * shared_src/cmdline.c (enter_cmdline): Check the return value of
- set_device in the `root' command.
-
- * shared_src/char_io.c (memcheck): Special-case cur_part_desc and
- reenable memory checking.
-
-1999-03-21 Gordon Matzigkeit <gord@trick.fig.org>
-
- * shared_src/boot.c (load_image): Make sure we use the mapped
- address before actually writing data to memaddr.
-
- * shared_src/char_io.c (get_cmdline): Only zero-terminate if there
- were leading blanks. This prevents accidental truncation of
- commands.
-
- * grub/asmstub.c (get_diskinfo): Cache device geometries as well
- as file handles.
- Use the Linux HDIO_GETGEO ioctl to make a better guess at hard
- disk geometries.
-
-1999-03-16 Gordon Matzigkeit <gord@trick.fig.org>
-
- * shared_src/shared.h (geometry_t): Delete typedef, until we
- actually use it.
-
-1999-03-16 OKUJI Yoshinori <okuji@kuicr.kyoto-u.ac.jp>
-
- * shared_src/asm.S (biosdisk): Use a structure for geometry
- instead of a integer.
- (get_diskinfo): Take a pointer to a geometry structure as the
- second argument, and fill a geometry in it. Return 1 if an error
- occurs, otherwise return 0.
- * shared_src/boot.c (bsd_boot): Compute BIOS geometries for BSD.
- * shared_src/cmdline.c (enter_cmdline): Declare dest_geom as
- struct geometry.
- * shared_src/disk_io.c (buf_geom): Declare as struct geometry.
- * shared_src/filesys.h (SECTORS): Deleted.
- (HEADS): Likewise.
- (CYLINDERS): Likewise.
- * shared_src/shared.h (BIOSDISK_FLAG_LBA_EXTENSION): New macro.
- (struct geometry): New structure.
- (buf_geom): Correct the prototype.
- (get_diskinfo): Likewise.
- (biosdisk): Likewise.
-
-1999-03-15 Gordon Matzigkeit <gord@trick.fig.org>
-
- * grub/asmstub.c (doit): Nested function to get a clean stack
- frame while in grub_stage2.
- Use different assembler magic. From OKUJI Yoshinori.
-
-1999-03-14 Gordon Matzigkeit <gord@trick.fig.org>
-
- * shared_src/stage2.c (run_menu): Use A_REVERSE and A_NORMAL
- constants instead of magic numbers.
-
- * shared_src/shared.h (A_REVERSE): Renamed from ATTR_INVERSE for
- compatibility with curses.
- (A_NORMAL): Renamed from ATTR_NORMAL.
-
- * shared_src/cmdline.c (enter_cmdline): Change prompt to "grub> ".
- (enter_cmdline): Only abort the boot if we are in a script.
-
- * shared_src/stage2.c (run_menu): Change prompts to "grub edit> ".
-
- * shared_src/char_io.c (memcheck): Use RAW_ADDR to compute memory
- locations.
- (get_cmdline): Change the `goto next line' code to account for
- newlines deleting to end of line under curses.
-
- * Innumerable cleanups to fix warnings. There are still too many
- typecasts in the wrong places (int variables used to hold
- pointers, then casted to a pointer type), but things look better.
-
- * configure.in (CPPFLAGS): Bump up GCC warnings to -Wall
- -Wmissing-prototypes -Wunused.
-
- * shared_src/shared.h: Delete stupid declarations, and totally
- rearrange for clarity.
- (inb, outb): Move to cmdline.c, since it's only used there.
- (print_possibilities, fsmax, fsys_table): Move definitions to
- disk_io.c.
-
- * grub/asmstub.c: Fill in more stubs.
-
-1999-03-13 Gordon Matzigkeit <gord@trick.fig.org>
-
- * shared_src/gunzip.c (border): Rename to bitorder, to resolve
- clash with curses.
- * shared_src/stage2.c (timeout): Rename to grub_timeout.
-
- * configure.in: Check for curses libraries for use with
- /sbin/grub.
-
- * shared_src/shared.h (KEY_DELETE): Rename to KEY_DC, for
- compatibility with curses.
- (KEY_INSERT): Rename to KEY_IC.
- (KEY_PGDN): Rename to KEY_NPAGE.
- (KEY_PGUP): Rename to KEY_PPAGE.
-
- * shared_src/asm.S (asm_getkey): Renamed to getkey.
-
- * shared_src/char_io.c (getkey): Delete, because it's useless.
-
- * shared_src/shared.h: Resolve name clashes with libc by renaming
- overlapping functions to have grub_ prefixes, then defining
- macros.
-
- * grub/asmstub.c (start_stage2): Make some assertions about our
- scratch memory area.
-
- * shared_src/shared.h (end): Delete declaration.
- (RAW_ADDR, RAW_SEG): Macros to redirect /sbin/grub memory requests
- through grub_scratch_mem.
-
- * grub/asmstub.c (get_mem_map): Implement, simulating 4MB
- contiguous memory.
- (get_code_end): Implement, simulating with a malloced area.
- grub/asmstub.c (start_stage2): Initialize grub_scratch_mem.
-
- * shared_src/asm.S (get_mem_map): Some BIOSes expect the high word
- of %eax to be zero.
- (get_code_end): Move this from common.c so that we can stub it out
- in the simulator.
-
- * debian/rules: Make sure info files end up in /usr/info, not
- /info.
-
-1999-03-10 Gordon Matzigkeit <gord@trick.fig.org>
-
- * shared_src/asm.S (biosdisk): Make LBA mode work correctly. From
- OKUJI Yoshinori.
- Unconditionally define NO_INT13_FALLBACK until we release GRUB
- 0.6. This will help debug any problems with the LBA support until
- then.
-
-1999-03-09 Gordon Matzigkeit <gord@trick.fig.org>
-
- * shared_src/asm.S (biosdisk): Compute location of
- disk_address_packet correctly. From OKUJI Yoshinori.
-
-1999-03-08 Gordon Matzigkeit <gord@trick.fig.org>
-
- * docs/grub.texi: New Texinfo documentation.
-
- * shared_src/disk_io.c (set_device): First stab at interpreting
- Mach-style partition naming.
-
- * shared_src/stage2.c (run_menu): Don't say it was a failure if
- enter_cmdline returns nonzero... just wait for a key.
-
- * shared_src/cmdline.c (enter_cmdline): Return nonzero, and avoid
- the fallback command if we did an install.
-
- * shared_src/asm.S (_start): New explicit symbol to supress
- warnings.
-
- * e2fs_stage1_5/Makefile.am (NO_FANCY_STUFF): Renamed to STAGE1_5,
- since that describes this conditional more accurately.
- * fat_stage1_5/Makefile.am: Likewise.
- * ffs_stage1_5/Makefile.am: Likewise.
- * shared_src/asm.S: Likewise.
- * shared_src/char_io.c: Likewise.
- * shared_src/common.c: Likewise.
- * shared_src/disk_io.c: Likewise.
- * shared_src/fsys_ext2fs.c: Likewise.
- * shared_src/fsys_ffs.c: Likewise.
- * shared_src/shared.h: Likewise.
-
-1999-03-07 Gordon Matzigkeit <gord@trick.fig.org>
-
- * configure.in (SHARED_SRC_RULES): Automatically generate
- Makefile dependencies for files in shared_src.
- e2fs_stage1_5/Makefile.am: Use them.
- fat_stage1_5/Makefile.am: Likewise.
- ffs_stage1_5/Makefile.am: Likewise.
- grub/Makefile.am: Likewise.
- stage2/Makefile.am: Likewise.
- stage2_debug/Makefile.am: Likewise.
-
- * shared_src/disk_inode.h: Fix typo: i_ic shouldn't be defined.
-
- * shared_src/fsys_ffs.c (block_map): Make static, since this
- function isn't used outside of its defining file.
-
- * shared_src/disk_io.c [NO_FANCY_STUFF]: Eliminate a whole bunch
- more functions from the stage1.5. From OKUJI Yoshinori.
- * shared_src/fsys_ffs.c: Likewise.
- * shared_src/char_io.c: Likewise.
-
-1999-03-05 Gordon Matzigkeit <gord@trick.fig.org>
-
- * shared_src/char_io.c (getkey): Don't set BUF_DRIVE to -1.
- BUF_DRIVE has nothing at all to do with getkey.
-
- * shared_src/common.c (err_list): Change description of ERR_GEOM
- to be more informative.
-
- * Makefile.am (configure): Depend on debian/changelog.
-
- * configure.in (host_cpu): Make all fully i386-compatible CPUs be
- identified as i386.
- (AM_INIT_AUTOMAKE): Fetch values for PACKAGE and VERSION from
- debian/changelog, so that we only have one file to update.
-
- * shared_src/asm.S (get_diskinfo): Fix a few bit-twiddling bugs in
- the BIOS extension detection code.
- (biosdisk) [AWARD_INT13_EXTENSIONS]: Preliminary implementation
- of Award's encoding of cylinder bits 10 and 11.
- (biosdisk) [NO_INT13_FALLBACK]: If defined, don't use the standard
- disk interface if the extended interface fails.
-
- * configure.in: Make sure $(host_cpu) and $(host_vendor) are
- substituted into the Makefile.
-
- * e2fs_stage1_5/Makefile.am (pkgdatadir): Install files in
- $(datadir)/grub/$(host_cpu)-$(host_vendor).
- * fat_stage1_5/Makefile.am: Likewise.
- * ffs_stage1_5/Makefile.am: Likewise.
- * stage1/Makefile.am: Likewise.
- * stage2/Makefile.am: Likewise.
- * stage2_debug/Makefile.am: Likewise.
-
-1999-03-03 Gordon Matzigkeit <gord@trick.fig.org>
-
- * shared_src/asm.S (biosdisk): Use LBA mode if high nibble of
- GEOMETRY is nonzero.
- (get_diskinfo): Set high nibble of GEOMETRY (0xf0000000) to 1 if
- LBA mode is detected.
-
-1999-03-02 Gordon Matzigkeit <gord@trick.fig.org>
-
- * shared_src/disk_io.c (make_saved_active): Use BIOSDISK_READ and
- BIOSDISK_WRITE.
-
- * shared_src/cmdline.c (enter_cmdline): Use BIOSDISK_WRITE.
-
- * shared_src/shared.h (BIOSDISK_SUBFUNC_READ,
- BIOSDISK_SUBFUNC_WRITE): Delete constants.
-
- * shared_src/asm.S (biosdisk): Change subfunc argument to be
- read=0, write=1.
-
- * configure.in: Drop redundant AC_PROG_INSTALL. From OKUJI
- Yoshinori.
-
-1999-03-01 Gordon Matzigkeit <gord@trick.fig.org>
-
- * debian/rules (binary-arch): Properly install README.debian.
-
- * acinclude.m4 (grub_OBJCOPY_ABSOLUTE): Don't forget to move the
- old binary out of the way before reentering the loop.
- (grub_ASM_ADDR32): Delete conftest files after running the test.
-
- * debian/rules (binary-arch): Remove empty /sbin directory until
- /sbin/grub is installed. Use $(DESTDIR) instead of $(prefix) to
- install files.
-
- * shared_src/asm.S (version_string): Set the version string from
- the VERSION specified in configure.in.
-
- * Change all Makefiles into Makefile.ams. Many major build
- environment changes to get Automake/Autoconf working nicely.
-
-1999-02-28 Gordon Matzigkeit <gord@trick.fig.org>
-
- * NEWS: Moved from docs/NEWS.
-
- * configure.in, acinclude.m4: New files for Autoconf. From OKUJI
- Yoshinori.
-
- * AUTHORS, INSTALL: New files.
-
-1999-02-24 Gordon Matzigkeit <gord@trick.fig.org>
-
- * stage1/stage1.S (after_BPB): Do a hard disk probe first, so that
- we can work with IDE floppies (like the LS-120).
-
- * Run GNU Indent on */*.[ch].
-
-1999-02-21 Gordon Matzigkeit <gord@trick.fig.org>
-
- * debian: Add to the distribution, since we maintain the GRUB
- Debian package ourselves.
-
- * grub/asmstub.c: New file to implement stubbed assembly functions
- under Unix.
-
- * stage1/Makefile: Delete spurious dependencies on Makefile.
- * stage2/Makefile: Likewise.
- * stage2_debug/Makefile: Likewise.
- * grub/Makefile: Likewise.
-
- * shared_src/fsys_ext2fs.c (ext2fs_dir): Follow symbolic links
- rather than giving an error.
-
- * shared_src/common.c (err_list): Use labeled elements to
- associate messages with error codes.
- * shared_src/shared.h: Make error codes into an enumerated type.
-
- * shared_src/common.c (err_list): Add ERR_SYMLINK_LOOP.
- * shared_src/shared.h: Likewise.
-
- * shared_src/char_io.c (bcopy): Don't make any assumptions about
- the length of an unsigned long.
-
- * grub/Makefile: Treat CFLAGS, CPPFLAGS, LDFLAGS according to
- GNU standards.
- * stage2/Makefile: Likewise.
- * e2fs_stage1_5/Makefile: Likewise.
- * fat_stage1_5/Makefile: Likewise.
- * ffs_stage1_5/Makefile: Likewise.
-
-1999-02-20 Gordon Matzigkeit <gord@trick.fig.org>
-
- * docs/index.html: Rename to grub.html, so that we don't hide
- files in this directory from a web browser.
-
-1999-02-15 Gordon Matzigkeit <gord@trick.fig.org>
-
- * Makefile.end (PROGS): Add grub.
-
- * grub/main.c: New file.
-
- * grub/Makefile: New directory to contain the stage2 Unix program.
-
- * shared_src/cmdline.c: Use substring.
- * shared_src/fsys_ext2fs.c: Likewise.
- * shared_src/fsys_fat.c: Likewise.
- * shared_src/fsys_ffs.c: Likewise.
- * shared_src/stage2.c: Likewise.
-
- * shared_src/shared.h: Delete strcmp, declare substring.
-
- * shared_src/char_io.c (strcmp): Rename to `substring', because
- this function doesn't behave the same as libc's strcmp.
-
-1999-02-14 Gordon Matzigkeit <gord@trick.fig.org>
-
- * shared_src/shared.h: (addr32, data32): Delete definitions.
-
- * stage1/stage1.S: Modify to use GAS's new .code16 semantics.
- shared_src/asm.S: Likewise.
-
- * configure: Test to see if the `addr32' instruction is supported.
- Ian Lance Taylor says that GAS's interpretation of `.code16' has
- changed. Older versions always generated 32-bit code, but
- implicitly inserted addr32 and data32 when .code16 was given.
- Newer versions generate 16-bit code, and require manual addr32 and
- data32 overrides.
-
- * shared_src/shared.h: Add some assertions to check that buffer
- addresses are properly defined.
-
-1999-02-12 Gordon Matzigkeit <gord@trick.fig.org>
-
- * shared_src/stage2.c (run_menu): Pause if we failed to boot both
- the default and fallback entries.
-
- * configure: Check to make sure that GAS actually honors .code16
- directives.
-
-1999-02-02 Gordon Matzigkeit <gord@trick.fig.org>
-
- * shared_src/asm.S: Fix typo that called interrupt 0xd (decimal
- 13) instead of 0x13.
-
-1999-01-31 Gordon Matzigkeit <gord@trick.fig.org>
-
- * e2fs_stage1_5/Makefile: Avoid gratuitous dependencies on
- Makefile.
- * fat_stage1_5/Makefile: Likewise.
- * ffs_stage1_5/Makefile: Likewise.
-
- * Makefile.end (PROGS): Add e2fs_stage1_5, fat_stage1_5, and
- grubinst.
- (distclean): New GNU standard rule.
-
-1998-10-23 Gordon Matzigkeit <gord@trick.fig.org>
-
- * configure: Accept `--host' as a synonym for `--target', and
- accept a non-optional argument as the target name. Join the
- prefix to the tool name with a hyphen.
-
- * shared_src/disk_io.c (print_fsys_type): Always print the
- partition type.
-
- * shared_src/stage2.c (run_menu): Check to make sure that the
- fallback entry is nonnegative.
- (run_menu): For consistency, use `e' rather than enter to edit the
- command entry.
projects / thirdparty / grub.git / commitdiff
