--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/samsung,s5k3m5.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5K3M5 Image Sensor
+
+description:
+ Samsung S5K3M5 (ISOCELL 3M5) image sensor is a 13MP image sensor.
+ The sensor is controlled over a serial camera control bus protocol,
+ the widest supported output image frame size is 4208x3120 at 30 frames
+ per second, data output format is RAW10 transferred over 4-lane
+ MIPI D-PHY interface.
+
+maintainers:
+ - Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: samsung,s5k3m5
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: MCLK supply clock.
+ maxItems: 1
+
+ reset-gpios:
+ description: Active low GPIO connected to RESET pad of the sensor.
+ maxItems: 1
+
+ afvdd-supply:
+ description: Autofocus actuator voltage supply, 2.8-3.0 volts.
+
+ vdda-supply:
+ description: Analogue voltage supply, 2.8 volts.
+
+ vddd-supply:
+ description: Digital core voltage supply, 1.05 volts.
+
+ vddio-supply:
+ description: Digital I/O voltage supply, 2.8 or 1.8 volts.
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ required:
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@10 {
+ compatible = "samsung,s5k3m5";
+ reg = <0x10>;
+ clocks = <&camera_mclk 0>;
+ assigned-clocks = <&camera_mclk 0>;
+ assigned-clock-rates = <24000000>;
+ reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ vdda-supply = <&vreg_2p8>;
+ vddd-supply = <&vreg_1p05>;
+ vddio-supply = <&vreg_1p8>;
+
+ port {
+ endpoint {
+ link-frequencies = /bits/ 64 <602500000>;
+ remote-endpoint = <&mipi_csi2_ep>;
+ };
+ };
+ };
+ };
+...