regulator: dt-bindings: Document TI TPS65185

Document the TPS65185. GPIO names are same as in the datasheet except for
the PWRUP pad which is described as "enable". That pin is optional because
the rising edge corresponds to setting one register bit and falling edge
to another register bit.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260102-tps65185-submit-v3-1-23bda35772f2@kemnade.info
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/Documentation/devicetree/bindings/regulator/ti,tps65185.yaml b/Documentation/devicetree/bindings/regulator/ti,tps65185.yaml
new file mode 100644 (file)
index 0000000..af0f638
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ti,tps65185.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/ti,tps65185.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS65185 Power Management Integrated Circuit
+
+maintainers:
+  - Andreas Kemnade <andreas@kemnade.info>
+
+description:
+  TPS65185 is a Power Management IC to provide Power for EPDs with one 3.3V
+  switch, 2 symmetric LDOs behind 2 DC/DC converters, and one unsymmetric
+  regulator for a compensation voltage.
+
+properties:
+  compatible:
+    const: ti,tps65185
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description:
+      PWRUP pin
+    maxItems: 1
+
+  pwr-good-gpios:
+    maxItems: 1
+
+  vcom-ctrl-gpios:
+    maxItems: 1
+
+  wakeup-gpios:
+    maxItems: 1
+
+  vin-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    additionalProperties: false
+    patternProperties:
+      "^(vcom|vposneg|v3p3)$":
+        unevaluatedProperties: false
+        type: object
+        $ref: /schemas/regulator/regulator.yaml
+
+required:
+  - compatible
+  - reg
+  - pwr-good-gpios
+  - vin-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@18 {
+            compatible = "ti,tps65185";
+            reg = <0x18>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_tps65185_gpio>;
+            pwr-good-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+            vcom-ctrl-gpios = <&gpio2 9 GPIO_ACTIVE_HIGH>;
+            enable-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+            wakeup-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+            vin-supply = <&epdc_pmic_supply>;
+            interrupts-extended = <&gpio2 0 IRQ_TYPE_LEVEL_LOW>;
+
+            regulators {
+                vcom {
+                    regulator-name = "vcom";
+                };
+
+                vposneg {
+                    regulator-name = "vposneg";
+                    regulator-min-microvolt = <15000000>;
+                    regulator-max-microvolt = <15000000>;
+                };
+
+                v3p3 {
+                    regulator-name = "v3p3";
+                };
+            };
+        };
+    };