hwmon: pmbus: mpq8785: Implement VOUT feedback resistor divider ratio configuration

Implement support for setting the VOUT_SCALE_LOOP PMBus register
based on an optional device tree property
"mps,vout-fb-divider-ratio-permille".

This allows the driver to provide the correct VOUT value depending
on the feedback voltage divider configuration for chips where the
bootloader does not configure the VOUT_SCALE_LOOP register.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://lore.kernel.org/r/20250511035701.2607947-4-paweldembicki@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/drivers/hwmon/pmbus/mpq8785.c b/drivers/hwmon/pmbus/mpq8785.c
index d0ac294b4bbcdecf5b3b9c280149ebd0a3c042c6..2e7c0d0c3f81c872bb81b4d6320fed19f9bca90a 100644 (file)
--- a/drivers/hwmon/pmbus/mpq8785.c
+++ b/drivers/hwmon/pmbus/mpq8785.c
@@ -5,11 +5,16 @@
 
 #include <linux/i2c.h>
 #include <linux/module.h>
+#include <linux/property.h>
 #include <linux/of_device.h>
 #include "pmbus.h"
 
 enum chips { mpq8785 };
 
+static u16 voltage_scale_loop_max_val[] = {
+       [mpq8785] = GENMASK(10, 0),
+};
+
 static int mpq8785_identify(struct i2c_client *client,
                            struct pmbus_driver_info *info)
 {
@@ -74,6 +79,8 @@ static int mpq8785_probe(struct i2c_client *client)
        struct device *dev = &client->dev;
        struct pmbus_driver_info *info;
        enum chips chip_id;
+       u32 voltage_scale;
+       int ret;
 
        info = devm_kmemdup(dev, &mpq8785_info, sizeof(*info), GFP_KERNEL);
        if (!info)
@@ -92,6 +99,17 @@ static int mpq8785_probe(struct i2c_client *client)
                return -ENODEV;
        }
 
+       if (!device_property_read_u32(dev, "mps,vout-fb-divider-ratio-permille",
+                                     &voltage_scale)) {
+               if (voltage_scale > voltage_scale_loop_max_val[chip_id])
+                       return -EINVAL;
+
+               ret = i2c_smbus_write_word_data(client, PMBUS_VOUT_SCALE_LOOP,
+                                               voltage_scale);
+               if (ret)
+                       return ret;
+       }
+
        return pmbus_do_probe(client, info);
 };