+++ /dev/null
-/*
- * BSD LICENSE
- *
- * Copyright(c) 2016-2017 Broadcom. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Broadcom nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <dt-bindings/clock/bcm-sr.h>
-
- osc: oscillator {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <50000000>;
- };
-
- crmu_ref25m: crmu_ref25m {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&osc>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- genpll0: genpll0@1d104 {
- #clock-cells = <1>;
- compatible = "brcm,sr-genpll0";
- reg = <0x0001d104 0x32>,
- <0x0001c854 0x4>;
- clocks = <&osc>;
- clock-output-names = "genpll0", "clk_125m", "clk_scr",
- "clk_250", "clk_pcie_axi",
- "clk_paxc_axi_x2",
- "clk_paxc_axi";
- };
-
- genpll2: genpll2@1d1ac {
- #clock-cells = <1>;
- compatible = "brcm,sr-genpll2";
- reg = <0x0001d1ac 0x32>,
- <0x0001c854 0x4>;
- clocks = <&osc>;
- clock-output-names = "genpll2", "clk_nic",
- "clk_ts_500_ref", "clk_125_nitro",
- "clk_chimp", "clk_nic_flash",
- "clk_fs";
- };
-
- genpll3: genpll3@1d1e0 {
- #clock-cells = <1>;
- compatible = "brcm,sr-genpll3";
- reg = <0x0001d1e0 0x32>,
- <0x0001c854 0x4>;
- clocks = <&osc>;
- clock-output-names = "genpll3", "clk_hsls",
- "clk_sdio";
- };
-
- genpll4: genpll4@1d214 {
- #clock-cells = <1>;
- compatible = "brcm,sr-genpll4";
- reg = <0x0001d214 0x32>,
- <0x0001c854 0x4>;
- clocks = <&osc>;
- clock-output-names = "genpll4", "clk_ccn",
- "clk_tpiu_pll", "clk_noc",
- "clk_chclk_fs4",
- "clk_bridge_fscpu";
- };
-
- genpll5: genpll5@1d248 {
- #clock-cells = <1>;
- compatible = "brcm,sr-genpll5";
- reg = <0x0001d248 0x32>,
- <0x0001c870 0x4>;
- clocks = <&osc>;
- clock-output-names = "genpll5", "clk_fs4_hf",
- "clk_crypto_ae", "clk_raid_ae";
- };
-
- lcpll0: lcpll0@1d0c4 {
- #clock-cells = <1>;
- compatible = "brcm,sr-lcpll0";
- reg = <0x0001d0c4 0x3c>,
- <0x0001c870 0x4>;
- clocks = <&osc>;
- clock-output-names = "lcpll0", "clk_sata_refp",
- "clk_sata_refn", "clk_sata_350",
- "clk_sata_500";
- };
-
- lcpll1: lcpll1@1d138 {
- #clock-cells = <1>;
- compatible = "brcm,sr-lcpll1";
- reg = <0x0001d138 0x3c>,
- <0x0001c870 0x4>;
- clocks = <&osc>;
- clock-output-names = "lcpll1", "clk_wan",
- "clk_usb_ref",
- "clk_crmu_ts";
- };
-
- hsls_clk: hsls_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&genpll3 1>;
- clock-div = <1>;
- clock-mult = <1>;
- };
-
- hsls_div2_clk: hsls_div2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
- clock-div = <2>;
- clock-mult = <1>;
-
- };
-
- hsls_div4_clk: hsls_div4_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
- clock-div = <4>;
- clock-mult = <1>;
- };
-
- hsls_25m_clk: hsls_25m_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&crmu_ref25m>;
- clock-div = <1>;
- clock-mult = <1>;
- };
-
- hsls_25m_div2_clk: hsls_25m_div2_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&hsls_25m_clk>;
- clock-div = <2>;
- clock-mult = <1>;
- };
-
- sdio0_clk: sdio0_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
- clock-div = <1>;
- clock-mult = <1>;
- };
-
- sdio1_clk: sdio1_clk {
- #clock-cells = <0>;
- compatible = "fixed-factor-clock";
- clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
- clock-div = <1>;
- clock-mult = <1>;
- };
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#include <dt-bindings/clock/bcm-sr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
reg = <0 0x60401000 0 0x38c>;
};
+ osc: clock-50000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <50000000>;
+ };
+
+ crmu_ref25m: hsls_25m_clk: clock-25000000 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&osc>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ hsls_div2_clk: hsls_div2_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+ clock-div = <2>;
+ clock-mult = <1>;
+
+ };
+
+ hsls_div4_clk: hsls_div4_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll3 BCM_SR_GENPLL3_HSLS_CLK>;
+ clock-div = <4>;
+ clock-mult = <1>;
+ };
+
+ hsls_25m_div2_clk: clock-12500000 {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&hsls_25m_clk>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
scr {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x66400000 0x100000>;
- #include "stingray-clock.dtsi"
-
otp: otp@1c400 {
compatible = "brcm,ocotp-v2";
reg = <0x0001c400 0x68>;
reg = <0x0001d000 0x400>;
};
+ lcpll0: clock-controller@1d0c4 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-lcpll0";
+ reg = <0x0001d0c4 0x3c>,
+ <0x0001c870 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll0", "clk_sata_refp",
+ "clk_sata_refn", "clk_sata_350",
+ "clk_sata_500";
+ };
+
+ genpll0: clock-controller@1d104 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll0";
+ reg = <0x0001d104 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll0", "clk_125m", "clk_scr",
+ "clk_250", "clk_pcie_axi",
+ "clk_paxc_axi_x2",
+ "clk_paxc_axi";
+ };
+
+ lcpll1: clock-controller@1d138 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-lcpll1";
+ reg = <0x0001d138 0x3c>,
+ <0x0001c870 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "lcpll1", "clk_wan",
+ "clk_usb_ref",
+ "clk_crmu_ts";
+ };
+
+ genpll2: clock-controller@1d1ac {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll2";
+ reg = <0x0001d1ac 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll2", "clk_nic",
+ "clk_ts_500_ref", "clk_125_nitro",
+ "clk_chimp", "clk_nic_flash",
+ "clk_fs";
+ };
+
+ genpll3: clock-controller@1d1e0 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll3";
+ reg = <0x0001d1e0 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll3", "clk_hsls",
+ "clk_sdio";
+ };
+
+ genpll4: clock-controller@1d214 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll4";
+ reg = <0x0001d214 0x32>,
+ <0x0001c854 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll4", "clk_ccn",
+ "clk_tpiu_pll", "clk_noc",
+ "clk_chclk_fs4",
+ "clk_bridge_fscpu";
+ };
+
+ genpll5: clock-controller@1d248 {
+ #clock-cells = <1>;
+ compatible = "brcm,sr-genpll5";
+ reg = <0x0001d248 0x32>,
+ <0x0001c870 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "genpll5", "clk_fs4_hf",
+ "clk_crypto_ae", "clk_raid_ae";
+ };
+
gpio_crmu: gpio@24800 {
compatible = "brcm,iproc-gpio";
reg = <0x00024800 0x4c>;
reg = <0x003f1000 0x100>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
bus-width = <8>;
- clocks = <&sdio0_clk>;
+ clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
iommus = <&smmu 0x6002 0x0000>;
status = "disabled";
};
reg = <0x003f2000 0x100>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
bus-width = <8>;
- clocks = <&sdio1_clk>;
+ clocks = <&genpll3 BCM_SR_GENPLL3_SDIO_CLK>;
iommus = <&smmu 0x6003 0x0000>;
status = "disabled";
};
projects / thirdparty / kernel / linux.git / commitdiff
