--- /dev/null
+#
+# Setup needed Tools and Libraries
+#
+
+ifeq "$(wildcard $(AP_WORK)\NWGNUcustom.ini)" "$(AP_WORK)\NWGNUcustom.ini"
+include $(AP_WORK)\NWGNUcustom.ini
+endif
+
+ifndef VERBOSE
+.SILENT:
+endif
+
+#
+# Treat like an include
+#
+ifndef EnvironmentDefined
+
+#
+# simple macros for parsing makefiles
+#
+EOLIST:=
+EMPTY :=
+COMMA := ,
+SPACE := $(EMPTY) $(EMPTY)
+
+#
+# Base environment
+#
+ifndef NWSDKDIR
+NWSDKDIR = c:\novell\ndk\NWSDK
+endif
+
+# LDAP SDK path
+ifndef LDAPSDK
+LDAPSDK = C:/novell/ndk/cldapsdk
+endif
+
+ifndef METROWERKS
+METROWERKS = C:\Program Files\Metrowerks\CodeWarrior
+endif
+
+ifndef MWERKS
+MWERKS = C:\Program Files\Metrowerks\CodeWarrior
+endif
+
+ifndef GNUTOOLS
+GNUTOOLS = $(TOOLPATH)\cygwin\bin
+endif
+
+# If LM_LICENSE_FILE isn't defined, define a variable that can be used to
+# restart make with it defined
+ifndef LM_LICENSE_FILE
+NO_LICENSE_FILE = NO_LICENSE_FILE
+endif
+
+#
+# Set the Release type that you want to build, possible values are:
+#
+# debug - full debug switches are set
+# noopt - normal switches are set (default)
+# optimized - optimization switches are set
+
+ifdef reltype
+RELEASE=$(reltype)
+endif
+
+ifdef RELTYPE
+RELEASE=$(RELTYPE)
+endif
+
+ifdef debug
+RELEASE=debug
+endif
+
+ifdef DEBUG
+RELEASE=debug
+endif
+
+ifdef optimized
+RELEASE=optimized
+endif
+
+ifdef OPTIMIZED
+RELEASE=optimized
+endif
+
+ifndef RELEASE
+RELEASE = optimized
+endif
+
+ifeq "$(RELEASE)" "debug"
+OBJDIR = Debug
+endif
+
+ifeq "$(RELEASE)" "noopt"
+OBJDIR = Noopt
+endif
+
+ifeq "$(RELEASE)" "optimized"
+OBJDIR = Release
+endif
+
+#
+# Setup compiler information
+#
+
+# MetroWerks NLM tools
+CC = mwccnlm
+CPP = mwccnlm
+LINK = mwldnlm
+LIB = mwldnlm -type library -w nocmdline
+
+NOVI = $(NWSDKDIR)\imports
+
+INCDIRS = $(NWSDKDIR)\include\nlm;$(NWSDKDIR)\include;$(NWSDKDIR)\include\winsock
+
+DEFINES = -DNETWARE
+
+#
+# MetroWerks static Libraries
+
+CLIB3S = $(METROWERKS)\Novell Support\Metrowerks Support\Libraries\Runtime\mwcrtl.lib
+#MATH3S =
+#PLIB3S = $(METROWERKS)\NOvell Support\Metrowerks Support\Libraries\MSL C++\MWCPP.lib
+
+# Base compile flags
+
+CFLAGS = -c -nosyspath -relax_pointers -Cpp_exceptions off -RTTI off -align byte -w nocmdline -proc Pentium
+
+ifeq "$(RELEASE)" "debug"
+CFLAGS += -g
+endif
+
+ifeq "$(RELEASE)" "optimized"
+CFLAGS += -opt all
+endif
+
+PATH:=$(PATH);$(METROWERKS)\bin;$(METROWERKS)\Other Metrowerks Tools\Command Line Tools
+
+#
+# Declare major project deliverables output directories here
+#
+
+ifdef DEST
+INSTALL = $(DEST)
+ifeq (\, $(findstring \,$(INSTALL)))
+INSTDIRS = $(DEST)
+endif
+endif
+
+ifdef dest
+INSTALL = $(dest)
+ifeq (\, $(findstring \,$(INSTALL)))
+INSTDIRS = $(dest)
+endif
+endif
+
+ifndef INSTALL
+INSTALL = $(AP_WORK)\Dist
+INSTDIRS = $(AP_WORK)\Dist
+endif
+
+INSTDIRS += \
+ $(INSTALL)\Apache \
+ $(INSTALL)\Apache\cgi-bin \
+ $(INSTALL)\Apache\conf \
+ $(INSTALL)\Apache\htdocs \
+ $(INSTALL)\Apache\icons \
+ $(INSTALL)\Apache\logs \
+ $(INSTALL)\Apache\modules
+
+#
+# Declare Command and tool macros here
+#
+
+# Os2LibPath is an extra check to see if we are on NT
+ifdef Os2LibPath
+OS = Windows_NT
+endif
+
+ifeq "$(OS)" "Windows_NT"
+CMD=cmd /C
+CHK=cmd /C if exist
+CHKNOT=cmd /C if not exist
+DEL = del /F
+DELTREE = cmd /C rd /s/q
+WINNT=1
+else
+CMD=command /C
+CHK=command /C if exist
+CHKNOT=command /C if not exist
+DEL = del
+DELTREE = deltree /y
+endif
+
+
+#
+# Setup base C compiler flags
+#
+
+#
+# Common directories
+#
+
+SRC = $(AP_WORK)\src
+AP = $(AP_WORK)\src\ap
+MAIN = $(AP_WORK)\src\main
+REGEX = $(AP_WORK)\src\regex
+STDMOD = $(AP_WORK)\src\modules\standard
+NWOS = $(AP_WORK)\src\os\netware
+
+#
+# Internal Libraries
+#
+
+APLIB = $(AP)\$(OBJDIR)\ap.lib
+REGEXLIB = $(REGEX)\$(OBJDIR)\regex.lib
+STDMODLIB = $(STDMOD)\$(OBJDIR)\stdmod.lib
+NWOSLIB = $(NWOS)\$(OBJDIR)\NetWare.lib
+
+#
+# Additional general defines
+#
+VERSION = 1,3,0
+
+EnvironmentDefined = 1
+endif # ifndef EnvironmentDefined
+
+# This is always set so that it will show up in lower directories
+
+ifdef Path
+Path = $(PATH)
+endif
+
--- /dev/null
+#
+# Obtain the global build environment
+#
+
+include $(AP_WORK)\NWGNUenvironment.inc
+
+#
+# If an NWGNUmake.inc file exists in the current directory, bring it in.
+#
+
+ifeq "$(wildcard NWGNUmake.inc)" "NWGNUmake.inc"
+include NWGNUmake.inc
+endif
+
+#
+# Define base targets and rules
+#
+
+TARGETS = libs nlms install clobber_libs clobber_nlms clean
+
+.PHONY : $(TARGETS) default all help
+
+default: $(SUBDIRS) libs nlms
+
+all: $(SUBDIRS) libs nlms install
+
+help :
+ @echo targets for RELEASE=$(RELEASE):
+ @echo (default) . . . . libs nlms
+ @echo all . . . . . . . does everything (libs nlms install)
+ @echo libs. . . . . . . builds all libs
+ @echo nlms. . . . . . . builds all nlms
+ @echo install . . . . . builds libs and nlms and copies install files to
+ @echo "$(INSTALL)"
+ @echo clean . . . . . . deletes $(OBJDIR) dirs, *.err, and *.map
+ @echo clobber_all . . . deletes all possible output from the make
+ @echo clobber_install . deletes all files in $(INSTALL)
+ @$(CMD) echo.
+ @echo Multiple targets can be used on a single nmake command line -
+ @echo (i.e. $(MAKE) clean all)
+ @$(CMD) echo.
+ @echo You can also specify RELEASE=debug, RELEASE=noopt, or RELEASE=optimized
+ @echo The default is RELEASE=optimized
+
+clobber_all :: clean clobber_install
+
+clobber_install ::
+ -$(DELTREE) $(INSTALL) 2>NUL
+
+$(TARGETS) :: $(SUBDIRS)
+
+install :: nlms $(INSTDIRS)
+
+$(INSTDIRS) :
+ @echo creating $@
+ $(CHKNOT) $@\NUL mkdir $@
+
+#
+# build recursive targets
+#
+
+$(SUBDIRS) : FORCE
+ifneq "$(MAKECMDGOALS)" "clean"
+ @echo Building $(CURDIR)/$@
+endif
+ $(MAKE) -C $@ $(MAKECMDGOALS) -f NWGNUmakefile RELEASE=$(RELEASE)
+ $(CMD) echo.
+
+FORCE:
+
+#
+# Standard targets
+#
+
+clean ::
+ @echo Cleaning up $(CURDIR)
+ -$(DELTREE) $(OBJDIR) 2> NUL
+ $(CHK) *.err $(DEL) *.err
+ $(CHK) *.map $(DEL) *.map
+ $(CHK) *.d $(DEL) *.d
+ $(CHK) *.tmp $(DEL) *.tmp
+ $(CHK) *.sym $(DEL) *.sym
+ -$(DELTREE) $(OBJDIR) 2> NUL
+
+$(OBJDIR) ::
+ $(CHKNOT) $(OBJDIR)\nul mkdir $(OBJDIR)
+
--- /dev/null
+#
+# Declare the sub-directories to be built here
+#
+
+SUBDIRS = \
+ src \
+ $(EOLIST)
+
+#
+# Get the 'head' of the build environment. This includes default targets and
+# paths to tools
+#
+
+include $(AP_WORK)\NWGNUhead.inc
+
+#
+# build this level's files
+
+ifeq "$(wildcard NWGNUmakefile.mak)" "NWGNUmakefile.mak"
+include NWGNUmakefile.mak
+endif
+
+#
+# You can use this target if all that is needed is to copy files to the
+# installation area
+#
+install :: nlms FORCE
+ xcopy cgi-bin $(INSTALL)\Apache\cgi-bin /s/e/y
+ copy conf\access.conf-dist $(INSTALL)\Apache\conf\access.conf
+ copy conf\httpd.conf-dist-nw $(INSTALL)\Apache\conf\httpd.conf
+ copy conf\highperformance.conf-dist $(INSTALL)\Apache\conf\highperformance.conf
+ copy conf\magic $(INSTALL)\Apache\conf\magic
+ copy conf\mime.types $(INSTALL)\Apache\conf\mime.types
+ copy conf\srm.conf-dist $(INSTALL)\Apache\conf\srm.conf
+ copy ABOUT_APACHE $(INSTALL)\Apache\ABOUT_APACHE
+ copy Announcement $(INSTALL)\Apache\Announcement
+ copy src\CHANGES $(INSTALL)\Apache\CHANGES
+ copy LICENSE $(INSTALL)\Apache\LICENSE
+ copy README $(INSTALL)\Apache\README
+ copy NOTICE $(INSTALL)\Apache\NOTICE
+ xcopy htdocs $(INSTALL)\Apache\htdocs /s/e/y
+ xcopy icons $(INSTALL)\Apache\icons /s/e/y
--- /dev/null
+#
+# This contains final targets and should be included at the end of any
+# NWGNUmakefile.mak file
+#
+
+#
+# If we are going to create an nlm, make sure we have assigned variables to
+# use during the link.
+#
+
+ifndef NLM_NAME
+NLM_NAME = $(TARGET_nlm)
+endif
+
+ifndef NLM_DESCRIPTION
+NLM_DESCRIPTION = $(NLM_NAME)
+endif
+
+ifndef NLM_THREAD_NAME
+NLM_THREAD_NAME = $(NLM_NAME) Thread
+endif
+
+ifndef NLM_COPYRIGHT
+NLM_COPYRIGHT = Copyright (c) 2000-2004 The Apache Software Foundation. All rights reserved.
+endif
+
+#
+# Create dependency lists based on the files available
+#
+
+CCOPT_DEPENDS = $(AP_WORK)\NWGNUhead.inc NWGNUmakefile.mak $(OBJDIR)
+CPPOPT_DEPENDS = $(AP_WORK)\NWGNUhead.inc NWGNUmakefile.mak $(OBJDIR)
+
+$(NLM_NAME)_LINKOPT_DEPENDS = $(TARGET_lib) NWGNUmakefile.mak $(AP_WORK)\NWGNUtail.inc
+
+ifeq "$(words $(strip $(TARGET_lib)))" "1"
+LIB_NAME = $(basename $(notdir $(TARGET_lib)))
+$(LIB_NAME)_LIBLST_DEPENDS = $(FILES_lib_objs) NWGNUmakefile.mak $(AP_WORK)\NWGNUtail.inc
+endif
+
+ifeq "$(wildcard NWGNU$(LIB_NAME).mak)" "NWGNU$(LIB_NAME).mak"
+$(LIB_NAME)_LIBLST_DEPENDS += NWGNU$(LIB_NAME).mak
+endif
+
+ifeq "$(wildcard NWGNU$(NLM_NAME).mak)" "NWGNU$(NLM_NAME).mak"
+$(NLM_NAME)_LINKOPT_DEPENDS += NWGNU$(NLM_NAME).mak
+CCOPT_DEPENDS += NWGNU$(NLM_NAME).mak
+CPPOPT_DEPENDS += NWGNU$(NLM_NAME).mak
+endif
+
+ifeq "$(wildcard NWGNUmake.inc)" "NWGNUmake.inc"
+$(NLM_NAME)_LINKOPT_DEPENDS += NWGNUmake.inc
+CCOPT_DEPENDS += NWGNUmake.inc
+CPPOPT_DEPENDS += NWGNUmake.inc
+endif
+
+ifneq "$(findstring xdc,$(XLFLAGS))" ""
+XDCFOUND = 1
+endif
+
+ifneq "$(findstring XDC,$(XLFLAGS))" ""
+XDCFOUND = 1
+endif
+
+#
+# Generic compiler rules
+#
+
+%.d: %.c $(OBJDIR)\cc.opt
+ @echo Creating dependancy list for $<
+ $(CC) $< -o $*.tmp -M @$(OBJDIR)\cc.opt
+ $(GNUTOOLS)/sed 's/$*.o[ :]*/$(OBJDIR)\/$*.o : $@ /g' $*.tmp > $@
+ -$(DEL) $*.tmp
+
+%.d: %.cpp $(OBJDIR)\cpp.opt
+ @echo Creating dependancy list for $<
+ $(CC) $< -o $*.tmp -M @$(OBJDIR)\cpp.opt
+ $(GNUTOOLS)/sed 's/$*.o[ :]*/$(OBJDIR)\/$*.o : $@ /g' $*.tmp > $@
+ -$(DEL) $*.tmp
+
+$(OBJDIR)/%.o: %.c $(OBJDIR)\cc.opt
+ @echo Compiling $<
+ $(CC) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cc.opt
+
+$(OBJDIR)\cc.opt: $(CCOPT_DEPENDS)
+ $(CHK) $@ $(DEL) $@
+ @echo Generating $@
+ifneq "$(strip $(CFLAGS))" ""
+ @echo $(CFLAGS) >> $@
+endif
+ifneq "$(strip $(XCFLAGS))" ""
+ @echo $(XCFLAGS) >> $@
+endif
+ifneq "$(strip $(XINCDIRS))" ""
+ @echo $(foreach xincdir,$(strip $(subst ;,$(SPACE),$(XINCDIRS))),-I$(xincdir)) >> $@
+endif
+ifneq "$(strip $(INCDIRS))" ""
+ @echo $(foreach incdir,$(strip $(subst ;,$(SPACE),$(INCDIRS))),-I$(incdir)) >> $@
+endif
+ifneq "$(strip $(DEFINES))" ""
+ @echo $(DEFINES) >> $@
+endif
+ifneq "$(strip $(XDEFINES))" ""
+ @echo $(XDEFINES) >> $@
+endif
+
+$(OBJDIR)/%.o: %.cpp $(OBJDIR)\cpp.opt
+ @echo Compiling $<
+ $(CPP) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cpp.opt
+
+$(OBJDIR)\cpp.opt: $(CPPOPT_DEPENDS)
+ $(CHK) $@ $(DEL) $@
+ @echo Generating $@
+ifneq "$(strip $(CFLAGS))" ""
+ @echo $(CFLAGS) >> $@
+endif
+ifneq "$(strip $(XCFLAGS))" ""
+ @echo $(XCFLAGS) >> $@
+endif
+ifneq "$(strip $(XINCDIRS))" ""
+ @echo $(foreach xincdir,$(strip $(subst ;,$(SPACE),$(XINCDIRS))),-I$(xincdir)) >> $@
+endif
+ifneq "$(strip $(INCDIRS))" ""
+ @echo $(foreach incdir,$(strip $(subst ;,$(SPACE),$(INCDIRS))),-I$(incdir)) >> $@
+endif
+ifneq "$(strip $(DEFINES))" ""
+ @echo $(DEFINES) >> $@
+endif
+ifneq "$(strip $(XDEFINES))" ""
+ @echo $(XDEFINES) >> $@
+endif
+
+#
+# Rules to build libraries
+#
+
+# If we only have one target library then build it
+
+ifeq "$(words $(strip $(TARGET_lib)))" "1"
+
+# Include autodependancy files
+ifneq ($(MAKECMDGOALS),clean)
+ifneq "$(strip $(FILES_lib_objs))" ""
+-include $(patsubst $(OBJDIR)/%.o,%.d,$(FILES_lib_objs))
+endif
+endif
+
+$(TARGET_lib) : $(OBJDIR)\$(LIB_NAME)_lib.lst
+ @echo Generating $@
+ $(CHK) $(OBJDIR)\$(@F) $(DEL) $(OBJDIR)\$(@F)
+ $(LIB) -o $(OBJDIR)\$(@F) @$?
+
+$(OBJDIR)\$(LIB_NAME)_lib.lst: $($(LIB_NAME)_LIBLST_DEPENDS)
+ $(CHK) $@ $(DEL) $@
+ @echo Generating $@
+ifneq "$(strip $(FILES_lib_objs))" ""
+ @echo $(foreach objfile,$(FILES_lib_objs),$(subst /,\,$(objfile)) ) >> $@
+endif
+
+else # We must have more than one target library so load the individual makefiles
+
+$(OBJDIR)/%.lib: NWGNU%.mak $(AP_WORK)\NWGNUhead.inc $(AP_WORK)\NWGNUtail.inc FORCE
+ @echo Calling $<
+ $(MAKE) -f $< $(MAKECMDGOALS) RELEASE=$(RELEASE)
+
+endif
+
+#
+# Rules to build nlms.
+#
+
+vpath clibpre.o $(NWSDKDIR)\imports
+
+# If we only have one target NLM then build it
+ifeq "$(words $(strip $(TARGET_nlm)))" "1"
+
+# Include autodependancy files
+ifneq ($(MAKECMDGOALS),clean)
+ifneq "$(strip $(FILES_nlm_objs))" ""
+-include $(patsubst $(OBJDIR)/%.o,%.d,$(FILES_nlm_objs))
+endif
+endif
+
+$(TARGET_nlm) : $(FILES_nlm_objs) $(FILES_nlm_libs) $(OBJDIR)\$(NLM_NAME)_link.opt
+ @echo Linking $@
+ $(LINK) @$(OBJDIR)\$(NLM_NAME)_link.opt
+
+# This will force the link option file to be rebuilt if we change the
+# corresponding makefile
+
+$(OBJDIR)\$(NLM_NAME)_link.opt : $($(NLM_NAME)_LINKOPT_DEPENDS)
+ $(CHK) $(OBJDIR)\$(@F) $(DEL) $(OBJDIR)\$(@F)
+ $(CHK) $(OBJDIR)\$(NLM_NAME)_link.def $(DEL) $(OBJDIR)\$(NLM_NAME)_link.def
+ @echo Generating $@
+ @echo -warnings off >> $@
+ @echo -zerobss >> $@
+ @echo -desc "$(NLM_DESCRIPTION)" >> $@
+ @echo -o $(OBJDIR)\$(NLM_NAME).nlm >> $@
+ifneq "$(FILE_nlm_copyright)" ""
+ @-type $(FILE_nlm_copyright) >> $@
+else
+ @echo -copy "$(NLM_COPYRIGHT)" >> $@
+endif
+ifeq "$(RELEASE)" "debug"
+ @echo -screenname "$(NLM_NAME) Screen" >> $@
+ @echo -g >> $@
+ @echo -sym internal >> $@
+ @echo -sym codeview4 >> $@
+ @echo -osym $(NLM_NAME).sym >> $@
+else
+ @echo -screenname "Apache for NetWare" >> $@
+endif
+ifneq "$(NLM_VERSION)" ""
+ @echo -nlmversion=$(NLM_VERSION) >> $@
+else
+ @echo -nlmversion=$(VERSION) >> $@
+endif
+ @echo -l $(NWOS) >> $@
+ @echo -l $(AP)\$(OBJDIR) >> $@
+ @echo -l $(REGEX)\$(OBJDIR) >> $@
+ @echo -l $(STDMOD)\$(OBJDIR) >> $@
+ @echo -l $(NWOS)\$(OBJDIR) >> $@
+# @echo -l $(METROWERKS)\Novell Support\Metrowerks Support\Libraries\Runtime >> $@
+ @echo -l $(NWSDKDIR)\imports >> $@
+ @echo -l $(LDAPSDK)\Netware\clib\imports >> $@
+ @echo -nodefaults >> $@
+ @echo -map $(OBJDIR)\$(NLM_NAME).map>> $@
+ @echo -threadname "$(NLM_THREAD_NAME)" >> $@
+ifneq "$(NLM_STACK_SIZE)" ""
+ @echo -stacksize $(subst K,000,$(subst k,K,$(strip $(NLM_STACK_SIZE)))) >> $@
+else
+ @echo -stacksize 64000 >> $@
+endif
+ifneq "$(NLM_ENTRY_SYM)" ""
+ @echo -entry $(NLM_ENTRY_SYM) >> $@
+endif
+ifneq "$(NLM_EXIT_SYM)" ""
+ @echo -exit $(NLM_EXIT_SYM) >> $@
+endif
+ifneq "$(NLM_FLAGS)" ""
+ @echo -flags $(NLM_FLAGS) >> $@
+endif
+ifneq "$(strip $(FILES_nlm_objs))" ""
+ @echo $(foreach objfile,$(strip $(FILES_nlm_objs)),$(subst /,\,$(objfile))) >> $@
+endif
+ifneq "$(FILES_nlm_libs)" ""
+ @echo $(foreach libfile, $(notdir $(strip $(FILES_nlm_libs))),-l$(subst /,\,$(libfile))) >> $@
+endif
+ @echo -commandfile $(OBJDIR)\$(NLM_NAME)_link.def >> $@
+ifneq "$(FILE_nlm_msg)" ""
+ @echo Messages $(FILE_nlm_msg) >> $(OBJDIR)\$(NLM_NAME)_link.def
+endif
+ifneq "$(FILE_nlm_hlp)" ""
+ @echo Help $(FILE_nlm_hlp) >> $(OBJDIR)\$(NLM_NAME)_link.def
+endif
+ifneq "$(FILES_nlm_modules)" ""
+ @echo module $(foreach module,$(subst $(SPACE),$(COMMA),$(strip $(FILES_nlm_modules))),$(subst /,\,$(module))) >> $(OBJDIR)\$(NLM_NAME)_link.def
+endif
+ifneq "$(FILES_nlm_Ximports)" ""
+ @echo Import $(foreach import,$(subst $(SPACE),$(COMMA),$(strip $(FILES_nlm_Ximports))),$(subst /,\,$(import))) >> $(OBJDIR)\$(NLM_NAME)_link.def
+endif
+ifneq "$(FILES_nlm_exports)" ""
+ @echo Export $(foreach export,$(subst $(SPACE),$(COMMA),$(strip $(FILES_nlm_exports))),$(subst /,\,$(export))) >> $(OBJDIR)\$(NLM_NAME)_link.def
+endif
+ifneq "$(strip $(XLFLAGS))" ""
+ @echo $(XLFLAGS) >> $(OBJDIR)\$(NLM_NAME)_link.def
+endif
+#ifndef XDCFOUND
+# @echo XDCData $(NWOS)\apache.xdc >> $(OBJDIR)\$(NLM_NAME)_link.def
+#endif
+
+else # more than one target so look for individual makefiles.
+
+$(OBJDIR)/%.nlm: NWGNU%.mak $(AP_WORK)\NWGNUhead.inc $(AP_WORK)\NWGNUtail.inc FORCE
+ @echo Calling $<
+ $(MAKE) -f $< $(MAKECMDGOALS) RELEASE=$(RELEASE)
+
+endif
--- /dev/null
+#
+# Declare the sub-directories to be built here
+#
+
+SUBDIRS = \
+ ap \
+ regex \
+ os\netware \
+ modules \
+ main \
+ support \
+ lib\expat-lite \
+ $(EOLIST)
+
+#
+# Get the 'head' of the build environment. This includes default targets and
+# paths to tools
+#
+
+include $(AP_WORK)\NWGNUhead.inc
+
+#
+# build this level's files
+
+ifeq "$(wildcard NWGNUmakefile.mak)" "NWGNUmakefile.mak"
+include NWGNUmakefile.mak
+endif
+
+#
+# You can use this target if all that is needed is to copy files to the
+# installation area
+#
+install :: nlms FORCE
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(LDAPSDK)\netware\clib\inc \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ XDCData $(NWOS)\apache.xdc \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = Apache
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Web Server
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Apache
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 65536
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM =
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM =
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/Apache.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/main_nlm.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ clibpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ ApacheC \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @clib.imp \
+ @nlmlib.imp \
+ @threads.imp \
+ @ldapsdk.imp \
+ apache_main \
+ __get_thread_data_area_ptr \
+ init_tsd \
+ init_name_space \
+ ap_init_alloc \
+ ap_destroy_pool \
+ ap_make_array \
+ ap_push_array \
+ ap_make_table \
+ ap_overlay_tables \
+ ap_pstrdup \
+ ap_table_set \
+ ap_table_add \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+ copy $(OBJDIR)\Apache.nlm $(INSTALL)\Apache
+
+#
+# Any specialized rules here
+#
+
+$(OBJDIR)/%.o: $(NWOS)\%.c $(OBJDIR)\cc.opt
+ @echo compiling $<
+ $(CC) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cc.opt
+
+%.d: $(NWOS)\%.c $(OBJDIR)\cc.opt
+ @echo Creating dependancy list for $(notdir $<)
+ $(CC) $< -o $*.tmp -M @$(OBJDIR)\cc.opt
+ $(GNUTOOLS)/sed 's/$*.o[ :]*/$(OBJDIR)\/$*.o : $@ /g' $*.tmp > $@
+ -$(DEL) $*.tmp
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Declare the sub-directories to be built here
+#
+
+SUBDIRS = \
+ $(EOLIST)
+
+#
+# Get the 'head' of the build environment. This includes default targets and
+# paths to tools
+#
+
+include $(AP_WORK)\NWGNUhead.inc
+
+#
+# build this level's files
+
+ifeq "$(wildcard NWGNUmakefile.mak)" "NWGNUmakefile.mak"
+include NWGNUmakefile.mak
+endif
+
+#
+# You can use this target if all that is needed is to copy files to the
+# installation area
+#
+install :: nlms FORCE
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME =
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION =
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME =
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE =
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM =
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM =
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(OBJDIR)/ap.lib \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(OBJDIR)/ap_cpystrn.o \
+ $(OBJDIR)/ap_fnmatch.o \
+ $(OBJDIR)/ap_getpass.o \
+ $(OBJDIR)/ap_md5c.o \
+ $(OBJDIR)/ap_snprintf.o \
+ $(OBJDIR)/ap_sha1.o \
+ $(OBJDIR)/ap_checkpass.o \
+ $(OBJDIR)/ap_base64.o \
+ $(EOLIST)
+
+# objs not needed in Netware
+# $(OBJDIR)/ap_slack.o \
+# $(OBJDIR)/ap_execve.o \
+# $(OBJDIR)/ap_signal.o \
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = xmlparse
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Expat-Lite XML Parse
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = expat xmlparse
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/xmlparse.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/xmlparse.o \
+ $(OBJDIR)/hashtable.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ xmltok \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ @nlmlib.imp \
+ @xmltok.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ @xmlparse.imp \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = xmltok
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Expat-Lite XMLtok
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = xmltok
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/xmltok.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/xmltok.o \
+ $(OBJDIR)/xmlrole.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ @nlmlib.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ @xmltok.imp \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Declare the sub-directories to be built here
+#
+
+SUBDIRS = \
+ $(EOLIST)
+
+#
+# Get the 'head' of the build environment. This includes default targets and
+# paths to tools
+#
+
+include $(AP_WORK)\NWGNUhead.inc
+
+#
+# build this level's files
+
+ifeq "$(wildcard NWGNUmakefile.mak)" "NWGNUmakefile.mak"
+include NWGNUmakefile.mak
+endif
+
+#
+# You can use this target if all that is needed is to copy files to the
+# installation area
+#
+install :: nlms FORCE
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME =
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION =
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME =
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE =
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM =
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM =
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/XMLTok.nlm \
+ $(OBJDIR)/XMLParse.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(OBJDIR)/stdmod.lib \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+# Standard modules not linked statically
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+ copy $(OBJDIR)\*.nlm $(INSTALL)\Apache
+
+#
+# Any specialized rules here
+#
+$(OBJDIR)/%.o: $(NWOS)\%.c $(OBJDIR)\cc.opt
+ @echo compiling $<
+ $(CC) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cc.opt
+
+%.d: $(NWOS)\%.c $(OBJDIR)\cc.opt
+ @echo Creating dependancy list for $(notdir $<)
+ $(CC) $< -o $*.tmp -M @$(OBJDIR)\cc.opt
+ $(GNUTOOLS)/sed 's/$*.o[ :]*/$(OBJDIR)\/$*.o : $@ /g' $*.tmp > $@
+ -$(DEL) $*.tmp
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Declare the sub-directories to be built here
+#
+
+SUBDIRS = \
+ $(EOLIST)
+
+#
+# Get the 'head' of the build environment. This includes default targets and
+# paths to tools
+#
+
+include $(AP_WORK)\NWGNUhead.inc
+
+#
+# build this level's files
+
+ifeq "$(wildcard NWGNUmakefile.mak)" "NWGNUmakefile.mak"
+include NWGNUmakefile.mak
+endif
+
+#
+# You can use this target if all that is needed is to copy files to the
+# installation area
+#
+install :: nlms FORCE
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = ApacheC
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Core
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Apache Core
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 65536
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS = autounload
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/ApacheC.NLM \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/alloc.o \
+ $(OBJDIR)/buff.o \
+ $(OBJDIR)/http_config.o \
+ $(OBJDIR)/http_core.o \
+ $(OBJDIR)/http_log.o \
+ $(OBJDIR)/http_main.o \
+ $(OBJDIR)/http_protocol.o \
+ $(OBJDIR)/http_request.o \
+ $(OBJDIR)/http_vhost.o \
+ $(OBJDIR)/util.o \
+ $(OBJDIR)/util_date.o \
+ $(OBJDIR)/util_script.o \
+ $(OBJDIR)/util_uri.o \
+ $(OBJDIR)/util_md5.o \
+ $(OBJDIR)/rfc1413.o \
+ $(OBJDIR)/buildmark.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ clibpre.o \
+ $(APLIB) \
+ $(REGEXLIB) \
+ $(STDMODLIB) \
+ $(NWOSLIB) \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ clib \
+ ws2_32 \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @lib0.imp \
+ @clib.imp \
+ @nlmlib.imp \
+ @threads.imp \
+ @ws2nlm.imp \
+ KillMe \
+ kMutexAlloc \
+ kMutexFree \
+ kMutexLock \
+ kMutexUnlock \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ @apachecore.imp \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+ copy $(OBJDIR)\ApacheC.NLM $(INSTALL)\Apache
+
+#
+# Any specialized rules here
+#
+
+$(OBJDIR)/%.o: $(SRC)\%.c $(OBJDIR)\cc.opt
+ @echo compiling $<
+ $(CC) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cc.opt
+
+%.d: $(SRC)\%.c $(OBJDIR)\cc.opt
+ @echo Creating dependancy list for $(notdir $<)
+ $(CC) $< -o $*.tmp -M @$(OBJDIR)\cc.opt
+ $(GNUTOOLS)/sed 's/$*.o[ :]*/$(OBJDIR)\/$*.o : $@ /g' $*.tmp > $@
+ -$(DEL) $*.tmp
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Declare the sub-directories to be built here
+#
+
+SUBDIRS = \
+ standard \
+ proxy \
+ $(EOLIST)
+
+#
+# Get the 'head' of the build environment. This includes default targets and
+# paths to tools
+#
+
+include $(AP_WORK)\NWGNUhead.inc
+
+#
+# build this level's files
+
+ifeq "$(wildcard NWGNUmakefile.mak)" "NWGNUmakefile.mak"
+include NWGNUmakefile.mak
+endif
+
+#
+# You can use this target if all that is needed is to copy files to the
+# installation area
+#
+install :: nlms FORCE
+
--- /dev/null
+#
+# Declare the sub-directories to be built here
+#
+
+SUBDIRS = \
+ $(EOLIST)
+
+#
+# Get the 'head' of the build environment. This includes default targets and
+# paths to tools
+#
+
+include $(AP_WORK)\NWGNUhead.inc
+
+#
+# build this level's files
+
+ifeq "$(wildcard NWGNUmakefile.mak)" "NWGNUmakefile.mak"
+include NWGNUmakefile.mak
+endif
+
+#
+# You can use this target if all that is needed is to copy files to the
+# installation area
+#
+install :: nlms FORCE
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = Proxy
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Proxy Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Proxy Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start_ws
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop_ws
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/Proxy.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/proxy_util.o \
+ $(OBJDIR)/proxy_cache.o \
+ $(OBJDIR)/proxy_connect.o \
+ $(OBJDIR)/proxy_ftp.o \
+ $(OBJDIR)/proxy_http.o \
+ $(OBJDIR)/mod_proxy.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libprews.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ @nlmlib.imp \
+ @ws2nlm.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ proxy_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+ copy $(OBJDIR)\Proxy.nlm $(INSTALL)\APache\modules
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = AuthAnon
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Authentication Anonymous Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = AuthAnon Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/AuthAnon.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_auth_anon.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ anon_auth_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(SRC)\lib\sdbm \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = AuthDBM
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Authentication DBM Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = AuthDBM Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/authdbm.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_auth_dbm.o \
+ $(OBJDIR)/sdbm_lock.o \
+ $(OBJDIR)/sdbm_hash.o \
+ $(OBJDIR)/sdbm.o \
+ $(OBJDIR)/sdbm_pair.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ dbm_auth_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+$(OBJDIR)/%.o: $(SRC)\lib\sdbm\%.c $(OBJDIR)\cc.opt
+ @echo compiling $<
+ $(CC) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cc.opt
+
+%.d: $(SRC)\lib\sdbm\%.c $(OBJDIR)\cc.opt
+ @echo Creating dependancy list for $(notdir $<)
+ $(CC) $< -o $*.tmp -M @$(OBJDIR)\cc.opt
+ $(GNUTOOLS)/sed 's/$*.o[ :]*/$(OBJDIR)\/$*.o : $@ /g' $*.tmp > $@
+ -$(DEL) $*.tmp
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = CERNMeta
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache CERN Meta Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = CERNMeta Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/CERNMeta.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_cern_meta.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ cern_meta_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = Digest
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Digest Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Digest Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/Digest.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_digest.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ digest_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = Expires
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Expires Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Expires Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/Expires.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_expires.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ expires_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = Headers
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Headers Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Headers Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/Headers.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_headers.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ headers_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = Info
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Information Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Info Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/Info.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_info.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ @nlmlib.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ info_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = Rewrite
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Rewrite Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Rewrite Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start_ws
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop_ws
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/Rewrite.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_rewrite.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libprews.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ @nlmlib.imp \
+ @ws2nlm.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ rewrite_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = Speling
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Spelling Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Spelling Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/Speling.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_speling.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ @nlmlib.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ speling_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = Status
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Status Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Status Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/Status.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_status.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ status_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = Usrtrack
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache User Track Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = UserTrack Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start_ws
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop_ws
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/Usrtrack.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_usertrack.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libprews.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ @ws2nlm.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ usertrack_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = vhost
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Mass Virtual Host Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Vhost Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/vhost.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_vhost_alias.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ vhost_alias_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = forensic
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Forensic Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Forensic Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/forensic.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_log_forensic.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ log_forensic_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Declare the sub-directories to be built here
+#
+
+SUBDIRS = \
+ $(EOLIST)
+
+#
+# Get the 'head' of the build environment. This includes default targets and
+# paths to tools
+#
+
+include $(AP_WORK)\NWGNUhead.inc
+
+#
+# build this level's files
+
+ifeq "$(wildcard NWGNUmakefile.mak)" "NWGNUmakefile.mak"
+include NWGNUmakefile.mak
+endif
+
+#
+# You can use this target if all that is needed is to copy files to the
+# installation area
+#
+install :: nlms FORCE
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(SRC)\lib\sdbm \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME =
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION =
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME =
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE =
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM =
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM =
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/AuthDBM.nlm \
+ $(OBJDIR)/AuthAnon.nlm \
+ $(OBJDIR)/CERNMeta.nlm \
+ $(OBJDIR)/Digest.nlm \
+ $(OBJDIR)/Expires.nlm \
+ $(OBJDIR)/Forensic.nlm \
+ $(OBJDIR)/Headers.nlm \
+ $(OBJDIR)/Info.nlm \
+ $(OBJDIR)/Rewrite.nlm \
+ $(OBJDIR)/Speling.nlm \
+ $(OBJDIR)/Status.nlm \
+ $(OBJDIR)/Uniqueid.nlm \
+ $(OBJDIR)/Usrtrack.nlm \
+ $(OBJDIR)/Vhost.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(OBJDIR)/stdmod.lib \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(OBJDIR)/mod_access.o \
+ $(OBJDIR)/mod_actions.o \
+ $(OBJDIR)/mod_alias.o \
+ $(OBJDIR)/mod_asis.o \
+ $(OBJDIR)/mod_auth.o \
+ $(OBJDIR)/mod_autoindex.o \
+ $(OBJDIR)/mod_dir.o \
+ $(OBJDIR)/mod_env.o \
+ $(OBJDIR)/mod_imap.o \
+ $(OBJDIR)/mod_include.o \
+ $(OBJDIR)/mod_log_nw.o \
+ $(OBJDIR)/mod_mime.o \
+ $(OBJDIR)/mod_negotiation.o \
+ $(OBJDIR)/mod_setenvif.o \
+ $(OBJDIR)/mod_so.o \
+ $(OBJDIR)/mod_userdir.o \
+ $(EOLIST)
+
+# Standard modules not linked statically
+
+# $(OBJDIR)/mod_auth_anon.obj \ dynamic
+# $(OBJDIR)/mod_auth_db.obj \
+# $(OBJDIR)/mod_auth_dbm.obj \
+# $(OBJDIR)/mod_cern_meta.obj \ dynamic
+# $(OBJDIR)/mod_cgi.obj \
+# $(OBJDIR)/mod_digest.obj \ dynamic
+# $(OBJDIR)/mod_expires.obj \ dynamic
+# $(OBJDIR)/mod_headers.obj \ dynamic
+# $(OBJDIR)/mod_info.obj \ dynamic
+# $(OBJDIR)/mod_log_agent.obj \
+# $(OBJDIR)/mod_log_referer.obj \
+# $(OBJDIR)/mod_mime_magic.obj \
+# $(OBJDIR)/mod_rewrite.obj \ dynamic
+# $(OBJDIR)/mod_speling.obj \ dynamic
+# $(OBJDIR)/mod_status.obj \ dynamic
+# $(OBJDIR)/mod_unique_id.obj \
+# $(OBJDIR)/mod_usertrack.obj \ dynamic
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+ copy $(OBJDIR)\*.nlm $(INSTALL)\APache\modules
+
+#
+# Any specialized rules here
+#
+$(OBJDIR)/%.o: $(NWOS)\%.c $(OBJDIR)\cc.opt
+ @echo compiling $<
+ $(CC) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cc.opt
+
+%.d: $(NWOS)\%.c $(OBJDIR)\cc.opt
+ @echo Creating dependancy list for $(notdir $<)
+ $(CC) $< -o $*.tmp -M @$(OBJDIR)\cc.opt
+ $(GNUTOOLS)/sed 's/$*.o[ :]*/$(OBJDIR)\/$*.o : $@ /g' $*.tmp > $@
+ -$(DEL) $*.tmp
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = uniqueid
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache Unique ID Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = Unique ID Module
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,3,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start_ws
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop_ws
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/uniqueid.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_unique_id.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libprews.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ApacheCore.imp \
+ @threads.imp \
+ @clib.imp \
+ @ws2nlm.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ unique_id_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Declare the sub-directories to be built here
+#
+
+SUBDIRS = \
+ $(EOLIST)
+
+#
+# Get the 'head' of the build environment. This includes default targets and
+# paths to tools
+#
+
+include $(AP_WORK)\NWGNUhead.inc
+
+#
+# build this level's files
+
+ifeq "$(wildcard NWGNUmakefile.mak)" "NWGNUmakefile.mak"
+include NWGNUmakefile.mak
+endif
+
+#
+# You can use this target if all that is needed is to copy files to the
+# installation area
+#
+install :: nlms FORCE
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = mod_tls
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Apache TLS/SSL Module
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = TLSModule
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,0,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM = _lib_start_ws
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM = _lib_stop_ws
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/mod_tls.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(OBJDIR)/NetWare.lib \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/mod_tls.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(NWOS)\$(OBJDIR)\libprews.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ wspssl \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @ws2nlm.imp \
+ @threads.imp \
+ @clib.imp \
+ @ApacheCore.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ tls_module \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(OBJDIR)/mod_nlm.o \
+ $(OBJDIR)/os.o \
+ $(OBJDIR)/getopt.o \
+ $(OBJDIR)/modules.o \
+ $(OBJDIR)/multithread.o \
+ $(OBJDIR)/libpre.o \
+ $(OBJDIR)/libprews.o \
+ $(OBJDIR)/mod_tls.o \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+ copy $(OBJDIR)\mod_tls.nlm $(INSTALL)\Apache\modules
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Declare the sub-directories to be built here
+#
+
+SUBDIRS = \
+ $(EOLIST)
+
+#
+# Get the 'head' of the build environment. This includes default targets and
+# paths to tools
+#
+
+include $(AP_WORK)\NWGNUhead.inc
+
+#
+# build this level's files
+
+ifeq "$(wildcard NWGNUmakefile.mak)" "NWGNUmakefile.mak"
+include NWGNUmakefile.mak
+endif
+
+#
+# You can use this target if all that is needed is to copy files to the
+# installation area
+#
+install :: nlms FORCE
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME =
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION =
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME =
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE =
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM =
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM =
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(OBJDIR)/regex.lib \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(OBJDIR)/regcomp.o \
+ $(OBJDIR)/regerror.o \
+ $(OBJDIR)/regexec.o \
+ $(OBJDIR)/regfree.o \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(AP) \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = htdigest
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = htdigest for Apache
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = htdigest
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,0,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM =
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM =
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/htdigest.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/htdigest.o \
+ $(OBJDIR)/ap_md5c.o \
+ $(OBJDIR)/ap_getpass.o \
+ $(OBJDIR)/ap_cpystrn.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ clibpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @nlmlib.imp \
+ @clib.imp \
+ @threads.imp \
+ @lib0.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+
+$(OBJDIR)/%.o: $(AP)\%.c $(OBJDIR)\cc.opt
+ @echo compiling $<
+ $(CC) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cc.opt
+
+%.d: $(AP)\%.c $(OBJDIR)\cc.opt
+ @echo Creating dependancy list for $(notdir $<)
+ $(CC) $< -o $*.tmp -M @$(OBJDIR)\cc.opt
+ $(GNUTOOLS)/sed 's/$*.o[ :]*/$(OBJDIR)\/$*.o : $@ /g' $*.tmp > $@
+ -$(DEL) $*.tmp
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(AP) \
+ $(SRC)\include \
+ $(NWOS) \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME = htpasswd
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION = Password generator for Apache
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME = htpasswd
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION = 1,0,0
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE = 8192
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM =
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM =
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/htpasswd.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(OBJDIR)/htpasswd.o \
+ $(OBJDIR)/ap_snprintf.o \
+ $(OBJDIR)/ap_checkpass.o \
+ $(OBJDIR)/ap_cpystrn.o \
+ $(OBJDIR)/ap_getpass.o \
+ $(OBJDIR)/ap_md5c.o \
+ $(OBJDIR)/ap_sha1.o \
+ $(OBJDIR)/ap_base64.o \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ clibpre.o \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ @nlmlib.imp \
+ @clib.imp \
+ @threads.imp \
+ @lib0.imp \
+ @ws2nlm.imp \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+
+#
+# Any specialized rules here
+#
+
+$(OBJDIR)/%.o: $(AP)\%.c $(OBJDIR)\cc.opt
+ @echo compiling $<
+ $(CC) $< -o=$(OBJDIR)\$(@F) @$(OBJDIR)\cc.opt
+
+%.d: $(AP)\%.c $(OBJDIR)\cc.opt
+ @echo Creating dependancy list for $(notdir $<)
+ $(CC) $< -o $*.tmp -M @$(OBJDIR)\cc.opt
+ $(GNUTOOLS)/sed 's/$*.o[ :]*/$(OBJDIR)\/$*.o : $@ /g' $*.tmp > $@
+ -$(DEL) $*.tmp
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
--- /dev/null
+#
+# Declare the sub-directories to be built here
+#
+
+SUBDIRS = \
+ $(EOLIST)
+
+#
+# Get the 'head' of the build environment. This includes default targets and
+# paths to tools
+#
+
+include $(AP_WORK)\NWGNUhead.inc
+
+#
+# build this level's files
+
+ifeq "$(wildcard NWGNUmakefile.mak)" "NWGNUmakefile.mak"
+include NWGNUmakefile.mak
+endif
+
+#
+# You can use this target if all that is needed is to copy files to the
+# installation area
+#
+install :: nlms FORCE
+
--- /dev/null
+#
+# Make sure all needed macro's are defined
+#
+
+#
+# Get the 'head' of the build environment if necessary. This includes default
+# targets and paths to tools
+#
+
+ifndef EnvironmentDefined
+include $(AP_WORK)\NWGNUhead.inc
+endif
+
+#
+# These directories will be at the beginning of the include list, followed by
+# INCDIRS
+#
+XINCDIRS += \
+ $(EOLIST)
+
+#
+# These flags will come after CFLAGS
+#
+XCFLAGS += \
+ $(EOLIST)
+
+#
+# These defines will come after DEFINES
+#
+XDEFINES += \
+ $(EOLIST)
+
+#
+# These flags will be added to the link.opt file
+#
+XLFLAGS += \
+ $(EOLIST)
+
+#
+# These values will be appended to the correct variables based on the value of
+# RELEASE
+#
+ifeq "$(RELEASE)" "debug"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "noopt"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+ifeq "$(RELEASE)" "release"
+XINCDIRS += \
+ $(EOLIST)
+
+XCFLAGS += \
+ $(EOLIST)
+
+XDEFINES += \
+ $(EOLIST)
+
+XLFLAGS += \
+ $(EOLIST)
+endif
+
+#
+# These are used by the link target if an NLM is being generated
+# This is used by the link 'name' directive to name the nlm. If left blank
+# TARGET_nlm (see below) will be used.
+#
+NLM_NAME =
+
+#
+# This is used by the link '-desc ' directive.
+# If left blank, NLM_NAME will be used.
+#
+NLM_DESCRIPTION =
+
+#
+# This is used by the '-threadname' directive. If left blank,
+# NLM_NAME Thread will be used.
+#
+NLM_THREAD_NAME =
+
+#
+# If this is specified, it will override VERSION value in
+# $(AP_WORK)\NWGNUenvironment.inc
+#
+NLM_VERSION =
+
+#
+# If this is specified, it will override the default of 64K
+#
+NLM_STACK_SIZE =
+
+#
+# If this is specified it will be used by the link '-entry' directive
+#
+NLM_ENTRY_SYM =
+
+#
+# If this is specified it will be used by the link '-exit' directive
+#
+NLM_EXIT_SYM =
+
+#
+# If this is specified it will be used by the link '-flags' directive
+#
+NLM_FLAGS =
+
+#
+# Declare all target files (you must add your files here)
+#
+
+#
+# If there is an NLM target, put it here
+#
+TARGET_nlm = \
+ $(OBJDIR)/htdigest.nlm \
+ $(OBJDIR)/htpasswd.nlm \
+ $(EOLIST)
+
+#
+# If there is an LIB target, put it here
+#
+TARGET_lib = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the NLM target above.
+# Paths must all use the '/' character
+#
+FILES_nlm_objs = \
+ $(EOLIST)
+
+#
+# These are the LIB files needed to create the NLM target above.
+# These will be added as a library command in the link.opt file.
+#
+FILES_nlm_libs = \
+ $(EOLIST)
+
+#
+# These are the modules that the above NLM target depends on to load.
+# These will be added as a module command in the link.opt file.
+#
+FILES_nlm_modules = \
+ $(EOLIST)
+
+#
+# If the nlm has a msg file, put it's path here
+#
+FILE_nlm_msg =
+
+#
+# If the nlm has a hlp file put it's path here
+#
+FILE_nlm_hlp =
+
+#
+# If this is specified, it will override $(NWOS)\copyright.txt.
+#
+FILE_nlm_copyright =
+
+#
+# Any additional imports go here
+#
+FILES_nlm_Ximports = \
+ $(EOLIST)
+
+#
+# Any symbols exported to here
+#
+FILES_nlm_exports = \
+ $(EOLIST)
+
+#
+# These are the OBJ files needed to create the LIB target above.
+# Paths must all use the '/' character
+#
+FILES_lib_objs = \
+ $(EOLIST)
+
+#
+# implement targets and dependancies (leave this section alone)
+#
+
+libs :: $(OBJDIR) $(TARGET_lib)
+
+nlms :: libs $(TARGET_nlm)
+
+#
+# Updated this target to create necessary directories and copy files to the
+# correct place. (See $(AP_WORK)\NWGNUhead.inc for examples)
+#
+install :: nlms FORCE
+ copy $(OBJDIR)\*.nlm $(INSTALL)\Apache
+
+#
+# Any specialized rules here
+#
+
+#
+# Include the 'tail' makefile that has targets that depend on variables defined
+# in this makefile
+#
+
+include $(AP_WORK)\NWGNUtail.inc
+
projects / thirdparty / apache / httpd.git / commitdiff
