--- /dev/null
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nvidia,tegra20-nand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra NAND Flash Controller
+
+maintainers:
+ - Jonathan Hunter <jonathanh@nvidia.com>
+
+allOf:
+ - $ref: nand-controller.yaml
+
+description:
+ The NVIDIA NAND controller provides an interface between NVIDIA SoCs
+ and raw NAND flash devices. It supports standard NAND operations,
+ hardware-assisted ECC, OOB data access, and DMA transfers, and
+ integrates with the Linux MTD NAND subsystem for reliable flash management.
+
+properties:
+ compatible:
+ const: nvidia,tegra20-nand
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: nand
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: nand
+
+ power-domains:
+ maxItems: 1
+
+ operating-points-v2:
+ maxItems: 1
+
+patternProperties:
+ '^nand@':
+ type: object
+ description: Individual NAND chip connected to the NAND controller
+ $ref: raw-nand-chip.yaml#
+
+ properties:
+ reg:
+ maximum: 5
+
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/tegra20-car.h>
+ #include <dt-bindings/gpio/tegra-gpio.h>
+
+ nand-controller@70008000 {
+ compatible = "nvidia,tegra20-nand";
+ reg = <0x70008000 0x100>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
+ clock-names = "nand";
+ resets = <&tegra_car 13>;
+ reset-names = "nand";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ nand@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-bus-width = <8>;
+ nand-on-flash-bbt;
+ nand-ecc-algo = "bch";
+ nand-ecc-strength = <8>;
+ wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
+ };
+ };
+...
+++ /dev/null
-NVIDIA Tegra NAND Flash controller
-
-Required properties:
-- compatible: Must be one of:
- - "nvidia,tegra20-nand"
-- reg: MMIO address range
-- interrupts: interrupt output of the NFC controller
-- clocks: Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names: Must include the following entries:
- - nand
-- resets: Must contain an entry for each entry in reset-names.
- See ../reset/reset.txt for details.
-- reset-names: Must include the following entries:
- - nand
-
-Optional children nodes:
-Individual NAND chips are children of the NAND controller node. Currently
-only one NAND chip supported.
-
-Required children node properties:
-- reg: An integer ranging from 1 to 6 representing the CS line to use.
-
-Optional children node properties:
-- nand-ecc-mode: String, operation mode of the NAND ecc mode. Currently only
- "hw" is supported.
-- nand-ecc-algo: string, algorithm of NAND ECC.
- Supported values with "hw" ECC mode are: "rs", "bch".
-- nand-bus-width : See nand-controller.yaml
-- nand-on-flash-bbt: See nand-controller.yaml
-- nand-ecc-strength: integer representing the number of bits to correct
- per ECC step (always 512). Supported strength using HW ECC
- modes are:
- - RS: 4, 6, 8
- - BCH: 4, 8, 14, 16
-- nand-ecc-maximize: See nand-controller.yaml
-- nand-is-boot-medium: Makes sure only ECC strengths supported by the boot ROM
- are chosen.
-- wp-gpios: GPIO specifier for the write protect pin.
-
-Optional child node of NAND chip nodes:
-Partitions: see mtd.yaml
-
- Example:
- nand-controller@70008000 {
- compatible = "nvidia,tegra20-nand";
- reg = <0x70008000 0x100>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&tegra_car TEGRA20_CLK_NDFLASH>;
- clock-names = "nand";
- resets = <&tegra_car 13>;
- reset-names = "nand";
-
- nand@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
- nand-bus-width = <8>;
- nand-on-flash-bbt;
- nand-ecc-algo = "bch";
- nand-ecc-strength = <8>;
- wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>;
- };
- };