ARM: dts: imx: Set default tuning step for imx7d usdhc

[ Upstream commit be18293e47cbca7c6acee9231fc851601d69563a ]

If the tuning step is not set, the tuning step is set to 1.
For some sd cards, the following Tuning timeout will occur.

Tuning failed, falling back to fixed sampling clock
mmc0: Tuning failed, falling back to fixed sampling clock

So set the default tuning step. This refers to the NXP vendor's
commit below:

https://github.com/nxp-imx/linux-imx/blob/lf-6.1.y/
arch/arm/boot/dts/imx7s.dtsi#L1216-L1217

Fixes: 1e336aa0c025 ("mmc: sdhci-esdhc-imx: correct the tuning start tap and step setting")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 1055a1013fd00efd25d60efc0faed19d167f982f..c978aab1d0e3df7a07f6f4e3da3781f17431ead2 100644 (file)
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -1166,6 +1166,8 @@
                                        <&clks IMX7D_USDHC1_ROOT_CLK>;
                                clock-names = "ipg", "ahb", "per";
                                bus-width = <4>;
+                               fsl,tuning-step = <2>;
+                               fsl,tuning-start-tap = <20>;
                                status = "disabled";
                        };
 
@@ -1178,6 +1180,8 @@
                                        <&clks IMX7D_USDHC2_ROOT_CLK>;
                                clock-names = "ipg", "ahb", "per";
                                bus-width = <4>;
+                               fsl,tuning-step = <2>;
+                               fsl,tuning-start-tap = <20>;
                                status = "disabled";
                        };
 
@@ -1190,6 +1194,8 @@
                                        <&clks IMX7D_USDHC3_ROOT_CLK>;
                                clock-names = "ipg", "ahb", "per";
                                bus-width = <4>;
+                               fsl,tuning-step = <2>;
+                               fsl,tuning-start-tap = <20>;
                                status = "disabled";
                        };