arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level

light sensor isl29023 share the interrupt with lsm303arg, but these
two devices use different interrupt type. According to the datasheet
of these two devides, both support low level trigger type, so correct
the interrupt type here to avoid the following error log:

  irq: type mismatch, failed to map hwirq-11 for gpio@5d0c0000!

Fixes: 9918092cbb0e ("arm64: dts: imx8qm-mek: add i2c0 and children devices")
Fixes: 1d8a9f043a77 ("arm64: dts: imx8: use defines for interrupts")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 779d9f78fb8196b04c41516963f16ece082360e3..667ba2fea8678215c611dc0ca19e8fbc397f9273 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -576,7 +576,7 @@
                compatible = "isil,isl29023";
                reg = <0x44>;
                interrupt-parent = <&lsio_gpio4>;
-               interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+               interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
        };
 
        pressure-sensor@60 {