Create partitions
-
+Welcome to fdisk <removed>.
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
-Device does not contain a recognized partition table
-
+Device does not contain a recognized partition table.
-The device presents a logical sector size that is smaller than
-the physical sector size. Aligning to a physical sector (or optimal
-I/O) size boundary is recommended, or performance may be impacted.
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
-Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Using default value 2048
-Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399): Partition 1 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (2048-102399, default 102399):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
-Select (default p): Partition number (2-4, default 2): First sector (22528-102399, default 22528): Using default value 22528
-Last sector, +sectors or +size{K,M,G} (22528-102399, default 102399): Partition 2 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (2-4, default 2): First sector (22528-102399, default 22528): Last sector, +sectors or +size{K,M,G,T,P} (22528-102399, default 102399):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (2 primary, 0 extended, 2 free)
e extended
-Select (default p): Partition number (3,4, default 3): First sector (43008-102399, default 43008): Using default value 43008
-Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399): Partition 3 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (3,4, default 3): First sector (43008-102399, default 43008): Last sector, +sectors or +size{K,M,G,T,P} (43008-102399, default 102399):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (3 primary, 0 extended, 1 free)
e extended
-Select (default e): Selected partition 4
-First sector (63488-102399, default 63488): Using default value 63488
-Last sector, +sectors or +size{K,M,G} (63488-102399, default 102399): Using default value 102399
-Partition 4 of type Extended and of size 19 MiB is set
+Select (default e):
+Selected partition 4
+First sector (63488-102399, default 63488): Last sector, +sectors or +size{K,M,G,T,P} (63488-102399, default 102399):
+Created a new <removed>.
-Command (m for help): All primary partitions are in use
+Command (m for help): All primary partitions are in use.
Adding logical partition 5
-First sector (65536-102399, default 65536): Using default value 65536
-Last sector, +sectors or +size{K,M,G} (65536-102399, default 102399): Partition 5 of type Linux and of size 5 MiB is set
+First sector (65536-102399, default 65536): Last sector, +sectors or +size{K,M,G,T,P} (65536-102399, default 102399):
+Created a new <removed>.
-Command (m for help): All primary partitions are in use
+Command (m for help): All primary partitions are in use.
Adding logical partition 6
-First sector (77824-102399, default 77824): Using default value 77824
-Last sector, +sectors or +size{K,M,G} (77824-102399, default 102399): Partition 6 of type Linux and of size 5 MiB is set
+First sector (77824-102399, default 77824): Last sector, +sectors or +size{K,M,G,T,P} (77824-102399, default 102399):
+Created a new <removed>.
-Command (m for help): All primary partitions are in use
+Command (m for help): All primary partitions are in use.
Adding logical partition 7
-First sector (90112-102399, default 90112): Using default value 90112
-Last sector, +sectors or +size{K,M,G} (90112-102399, default 102399): Using default value 102399
-Partition 7 of type Linux and of size 6 MiB is set
+First sector (90112-102399, default 90112): Last sector, +sectors or +size{K,M,G,T,P} (90112-102399, default 102399):
+Created a new <removed>.
-Command (m for help):
-Disk /dev/...: 52 MB, 52428800 bytes, 102400 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Command (m for help): Disk <removed>: 50 MiB, 52428800 bytes, 102400 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 32768 bytes
Disk label type: dos
+Disk identifier: <removed>
+Device Boot Start End Blocks Id System
+<removed>1 2048 22527 10240 83 Linux
+<removed>2 22528 43007 10240 83 Linux
+<removed>3 43008 63487 10240 83 Linux
+<removed>4 63488 102399 19456 5 Extended
+<removed>5 65536 75775 5120 83 Linux
+<removed>6 77824 88063 5120 83 Linux
+<removed>7 90112 102399 6144 83 Linux
- Device Boot Start End Blocks Id System
-/dev/...1 2048 22527 10240 83 Linux
-/dev/...2 22528 43007 10240 83 Linux
-/dev/...3 43008 63487 10240 83 Linux
-/dev/...4 63488 102399 19456 5 Extended
-/dev/...5 65536 75775 5120 83 Linux
-/dev/...6 77824 88063 5120 83 Linux
-/dev/...7 90112 102399 6144 83 Linux
-
-Command (m for help): The partition table has been altered!
-
+Command (m for help):
+The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
+
Alignment offsets:
0
0
Create partitions
-
+Welcome to fdisk <removed>.
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
-Device does not contain a recognized partition table
-
+Device does not contain a recognized partition table.
-The device presents a logical sector size that is smaller than
-the physical sector size. Aligning to a physical sector (or optimal
-I/O) size boundary is recommended, or performance may be impacted.
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
-Select (default p): Partition number (1-4, default 1): First sector (7-102399, default 7): Using default value 7
-Last sector, +sectors or +size{K,M,G} (7-102399, default 102399): Partition 1 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (1-4, default 1): First sector (7-102399, default 7): Last sector, +sectors or +size{K,M,G,T,P} (7-102399, default 102399):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
-Select (default p): Partition number (2-4, default 2): First sector (20487-102399, default 20487): Using default value 20487
-Last sector, +sectors or +size{K,M,G} (20487-102399, default 102399): Partition 2 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (2-4, default 2): First sector (20487-102399, default 20487): Last sector, +sectors or +size{K,M,G,T,P} (20487-102399, default 102399):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (2 primary, 0 extended, 2 free)
e extended
-Select (default p): Partition number (3,4, default 3): First sector (40967-102399, default 40967): Using default value 40967
-Last sector, +sectors or +size{K,M,G} (40967-102399, default 102399): Partition 3 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (3,4, default 3): First sector (40967-102399, default 40967): Last sector, +sectors or +size{K,M,G,T,P} (40967-102399, default 102399):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (3 primary, 0 extended, 1 free)
e extended
-Select (default e): Selected partition 4
-First sector (61447-102399, default 61447): Using default value 61447
-Last sector, +sectors or +size{K,M,G} (61447-102399, default 102399): Using default value 102399
-Partition 4 of type Extended and of size 20 MiB is set
+Select (default e):
+Selected partition 4
+First sector (61447-102399, default 61447): Last sector, +sectors or +size{K,M,G,T,P} (61447-102399, default 102399):
+Created a new <removed>.
-Command (m for help): All primary partitions are in use
+Command (m for help): All primary partitions are in use.
Adding logical partition 5
-First sector (61454-102399, default 63487): Using default value 63487
-Last sector, +sectors or +size{K,M,G} (63487-102399, default 102399): Partition 5 of type Linux and of size 5 MiB is set
+First sector (61454-102399, default 63487): Last sector, +sectors or +size{K,M,G,T,P} (63487-102399, default 102399):
+Created a new <removed>.
-Command (m for help): All primary partitions are in use
+Command (m for help): All primary partitions are in use.
Adding logical partition 6
-First sector (61454-102399, default 75775): Using default value 75775
-Last sector, +sectors or +size{K,M,G} (75775-102399, default 102399): Partition 6 of type Linux and of size 5 MiB is set
+First sector (61454-102399, default 75775): Last sector, +sectors or +size{K,M,G,T,P} (75775-102399, default 102399):
+Created a new <removed>.
-Command (m for help): All primary partitions are in use
+Command (m for help): All primary partitions are in use.
Adding logical partition 7
-First sector (61454-102399, default 88063): Using default value 88063
-Last sector, +sectors or +size{K,M,G} (88063-102399, default 102399): Using default value 102399
-Partition 7 of type Linux and of size 7 MiB is set
+First sector (61454-102399, default 88063): Last sector, +sectors or +size{K,M,G,T,P} (88063-102399, default 102399):
+Created a new <removed>.
-Command (m for help):
-Disk /dev/...: 52 MB, 52428800 bytes, 102400 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Command (m for help): Disk <removed>: 50 MiB, 52428800 bytes, 102400 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 32768 bytes
Alignment offset: 3584 bytes
Disk label type: dos
+Disk identifier: <removed>
+Device Boot Start End Blocks Id System
+<removed>1 7 20486 10240 83 Linux
+<removed>2 20487 40966 10240 83 Linux
+<removed>3 40967 61446 10240 83 Linux
+<removed>4 61447 102399 20476+ 5 Extended
+<removed>5 63487 73726 5120 83 Linux
+<removed>6 75775 86014 5120 83 Linux
+<removed>7 88063 102399 7168+ 83 Linux
- Device Boot Start End Blocks Id System
-/dev/...1 7 20486 10240 83 Linux
-/dev/...2 20487 40966 10240 83 Linux
-/dev/...3 40967 61446 10240 83 Linux
-/dev/...4 61447 102399 20476+ 5 Extended
-/dev/...5 63487 73726 5120 83 Linux
-/dev/...6 75775 86014 5120 83 Linux
-/dev/...7 88063 102399 7168+ 83 Linux
-
-Command (m for help): The partition table has been altered!
-
+Command (m for help):
+The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
+
Alignment offsets:
0
0
Create partitions
-
+Welcome to fdisk <removed>.
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
-Device does not contain a recognized partition table
-
+Device does not contain a recognized partition table.
-The device presents a logical sector size that is smaller than
-the physical sector size. Aligning to a physical sector (or optimal
-I/O) size boundary is recommended, or performance may be impacted.
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
-Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Using default value 2048
-Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399): Partition 1 of type Linux and of size 20 MiB is set
+Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (2048-102399, default 102399):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
-Select (default p): Partition number (2-4, default 2): First sector (43008-102399, default 43008): Using default value 43008
-Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399): Using default value 102399
-Partition 2 of type Linux and of size 29 MiB is set
+Select (default p): Partition number (2-4, default 2): First sector (43008-102399, default 43008): Last sector, +sectors or +size{K,M,G,T,P} (43008-102399, default 102399):
+Created a new <removed>.
-Command (m for help):
-Disk /dev/...: 52 MB, 52428800 bytes, 102400 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Command (m for help): Disk <removed>: 50 MiB, 52428800 bytes, 102400 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 32768 bytes
Disk label type: dos
+Disk identifier: <removed>
+Device Boot Start End Blocks Id System
+<removed>1 2048 43007 20480 83 Linux
+<removed>2 43008 102399 29696 83 Linux
- Device Boot Start End Blocks Id System
-/dev/...1 2048 43007 20480 83 Linux
-/dev/...2 43008 102399 29696 83 Linux
-
-Command (m for help): The partition table has been altered!
-
+Command (m for help):
+The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
+
Alignment offsets:
0
0
Create partitions (MD)
-
+Welcome to fdisk <removed>.
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
-Device does not contain a recognized partition table
-
+Device does not contain a recognized partition table.
-The device presents a logical sector size that is smaller than
-the physical sector size. Aligning to a physical sector (or optimal
-I/O) size boundary is recommended, or performance may be impacted.
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
-Select (default p): Partition number (1-4, default 1): First sector (2048-100095, default 2048): Using default value 2048
-Last sector, +sectors or +size{K,M,G} (2048-100095, default 100095): Partition 1 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (1-4, default 1): First sector (2048-100095, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (2048-100095, default 100095):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
-Select (default p): Partition number (2-4, default 2): First sector (22528-100095, default 22528): Using default value 22528
-Last sector, +sectors or +size{K,M,G} (22528-100095, default 100095): Partition 2 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (2-4, default 2): First sector (22528-100095, default 22528): Last sector, +sectors or +size{K,M,G,T,P} (22528-100095, default 100095):
+Created a new <removed>.
-Command (m for help):
-Disk /dev/md8: 51 MB, 51249152 bytes, 100096 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Command (m for help): Disk <removed>: 48.9 MiB, 51249152 bytes, 100096 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 65536 bytes / 131072 bytes
Disk label type: dos
+Disk identifier: <removed>
+Device Boot Start End Blocks Id System
+<removed>p1 2048 22527 10240 83 Linux
+<removed>p2 22528 43007 10240 83 Linux
- Device Boot Start End Blocks Id System
-/dev/md8p1 2048 22527 10240 83 Linux
-/dev/md8p2 22528 43007 10240 83 Linux
-
-Command (m for help): The partition table has been altered!
-
+Command (m for help):
+The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
+
Alignment offsets (MD):
0
0
Create partitions
-
+Welcome to fdisk <removed>.
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
-Device does not contain a recognized partition table
+Device does not contain a recognized partition table.
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
-Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Using default value 2048
-Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399): Partition 1 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (2048-102399, default 102399):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
-Select (default p): Partition number (2-4, default 2): First sector (22528-102399, default 22528): Using default value 22528
-Last sector, +sectors or +size{K,M,G} (22528-102399, default 102399): Partition 2 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (2-4, default 2): First sector (22528-102399, default 22528): Last sector, +sectors or +size{K,M,G,T,P} (22528-102399, default 102399):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (2 primary, 0 extended, 2 free)
e extended
-Select (default p): Partition number (3,4, default 3): First sector (43008-102399, default 43008): Using default value 43008
-Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399): Partition 3 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (3,4, default 3): First sector (43008-102399, default 43008): Last sector, +sectors or +size{K,M,G,T,P} (43008-102399, default 102399):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (3 primary, 0 extended, 1 free)
e extended
-Select (default e): Selected partition 4
-First sector (63488-102399, default 63488): Using default value 63488
-Last sector, +sectors or +size{K,M,G} (63488-102399, default 102399): Using default value 102399
-Partition 4 of type Extended and of size 19 MiB is set
+Select (default e):
+Selected partition 4
+First sector (63488-102399, default 63488): Last sector, +sectors or +size{K,M,G,T,P} (63488-102399, default 102399):
+Created a new <removed>.
-Command (m for help): All primary partitions are in use
+Command (m for help): All primary partitions are in use.
Adding logical partition 5
-First sector (65536-102399, default 65536): Using default value 65536
-Last sector, +sectors or +size{K,M,G} (65536-102399, default 102399): Partition 5 of type Linux and of size 5 MiB is set
+First sector (65536-102399, default 65536): Last sector, +sectors or +size{K,M,G,T,P} (65536-102399, default 102399):
+Created a new <removed>.
-Command (m for help): All primary partitions are in use
+Command (m for help): All primary partitions are in use.
Adding logical partition 6
-First sector (77824-102399, default 77824): Using default value 77824
-Last sector, +sectors or +size{K,M,G} (77824-102399, default 102399): Partition 6 of type Linux and of size 5 MiB is set
+First sector (77824-102399, default 77824): Last sector, +sectors or +size{K,M,G,T,P} (77824-102399, default 102399):
+Created a new <removed>.
-Command (m for help): All primary partitions are in use
+Command (m for help): All primary partitions are in use.
Adding logical partition 7
-First sector (90112-102399, default 90112): Using default value 90112
-Last sector, +sectors or +size{K,M,G} (90112-102399, default 102399): Using default value 102399
-Partition 7 of type Linux and of size 6 MiB is set
+First sector (90112-102399, default 90112): Last sector, +sectors or +size{K,M,G,T,P} (90112-102399, default 102399):
+Created a new <removed>.
-Command (m for help):
-Disk /dev/loop0: 52 MB, 52428800 bytes, 102400 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Command (m for help): Disk <removed>: 50 MiB, 52428800 bytes, 102400 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
+Disk identifier: <removed>
-
- Device Boot Start End Blocks Id System
-/dev/loop0p1 2048 22527 10240 83 Linux
-/dev/loop0p2 22528 43007 10240 83 Linux
-/dev/loop0p3 43008 63487 10240 83 Linux
-/dev/loop0p4 63488 102399 19456 5 Extended
-/dev/loop0p5 65536 75775 5120 83 Linux
-/dev/loop0p6 77824 88063 5120 83 Linux
-/dev/loop0p7 90112 102399 6144 83 Linux
+Device Boot Start End Blocks Id System
+<removed>p1 2048 22527 10240 83 Linux
+<removed>p2 22528 43007 10240 83 Linux
+<removed>p3 43008 63487 10240 83 Linux
+<removed>p4 63488 102399 19456 5 Extended
+<removed>p5 65536 75775 5120 83 Linux
+<removed>p6 77824 88063 5120 83 Linux
+<removed>p7 90112 102399 6144 83 Linux
Command (m for help):
Create partitions
-
+Welcome to fdisk <removed>.
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
-Device does not contain a recognized partition table
+Device does not contain a recognized partition table.
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
-Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Using default value 2048
-Last sector, +sectors or +size{K,M,G} (2048-102399, default 102399): Partition 1 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (1-4, default 1): First sector (2048-102399, default 2048): Last sector, +sectors or +size{K,M,G,T,P} (2048-102399, default 102399):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
-Select (default p): Partition number (2-4, default 2): First sector (22528-102399, default 22528): Using default value 22528
-Last sector, +sectors or +size{K,M,G} (22528-102399, default 102399): Partition 2 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (2-4, default 2): First sector (22528-102399, default 22528): Last sector, +sectors or +size{K,M,G,T,P} (22528-102399, default 102399):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (2 primary, 0 extended, 2 free)
e extended
-Select (default p): Partition number (3,4, default 3): First sector (43008-102399, default 43008): Using default value 43008
-Last sector, +sectors or +size{K,M,G} (43008-102399, default 102399): Partition 3 of type Linux and of size 10 MiB is set
+Select (default p): Partition number (3,4, default 3): First sector (43008-102399, default 43008): Last sector, +sectors or +size{K,M,G,T,P} (43008-102399, default 102399):
+Created a new <removed>.
-Command (m for help): Partition type:
+Command (m for help):
+Partition type:
p primary (3 primary, 0 extended, 1 free)
e extended
-Select (default e): Selected partition 4
-First sector (63488-102399, default 63488): Using default value 63488
-Last sector, +sectors or +size{K,M,G} (63488-102399, default 102399): Using default value 102399
-Partition 4 of type Extended and of size 19 MiB is set
+Select (default e):
+Selected partition 4
+First sector (63488-102399, default 63488): Last sector, +sectors or +size{K,M,G,T,P} (63488-102399, default 102399):
+Created a new <removed>.
-Command (m for help): All primary partitions are in use
+Command (m for help): All primary partitions are in use.
Adding logical partition 5
-First sector (65536-102399, default 65536): Using default value 65536
-Last sector, +sectors or +size{K,M,G} (65536-102399, default 102399): Partition 5 of type Linux and of size 5 MiB is set
+First sector (65536-102399, default 65536): Last sector, +sectors or +size{K,M,G,T,P} (65536-102399, default 102399):
+Created a new <removed>.
-Command (m for help): All primary partitions are in use
+Command (m for help): All primary partitions are in use.
Adding logical partition 6
-First sector (77824-102399, default 77824): Using default value 77824
-Last sector, +sectors or +size{K,M,G} (77824-102399, default 102399): Partition 6 of type Linux and of size 5 MiB is set
+First sector (77824-102399, default 77824): Last sector, +sectors or +size{K,M,G,T,P} (77824-102399, default 102399):
+Created a new <removed>.
-Command (m for help): All primary partitions are in use
+Command (m for help): All primary partitions are in use.
Adding logical partition 7
-First sector (90112-102399, default 90112): Using default value 90112
-Last sector, +sectors or +size{K,M,G} (90112-102399, default 102399): Using default value 102399
-Partition 7 of type Linux and of size 6 MiB is set
+First sector (90112-102399, default 90112): Last sector, +sectors or +size{K,M,G,T,P} (90112-102399, default 102399):
+Created a new <removed>.
-Command (m for help):
-Disk /dev/...: 52 MB, 52428800 bytes, 102400 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Command (m for help): Disk <removed>: 50 MiB, 52428800 bytes, 102400 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 32768 bytes
Disk label type: dos
+Disk identifier: <removed>
+Device Boot Start End Blocks Id System
+<removed>1 2048 22527 10240 83 Linux
+<removed>2 22528 43007 10240 83 Linux
+<removed>3 43008 63487 10240 83 Linux
+<removed>4 63488 102399 19456 5 Extended
+<removed>5 65536 75775 5120 83 Linux
+<removed>6 77824 88063 5120 83 Linux
+<removed>7 90112 102399 6144 83 Linux
- Device Boot Start End Blocks Id System
-/dev/...1 2048 22527 10240 83 Linux
-/dev/...2 22528 43007 10240 83 Linux
-/dev/...3 43008 63487 10240 83 Linux
-/dev/...4 63488 102399 19456 5 Extended
-/dev/...5 65536 75775 5120 83 Linux
-/dev/...6 77824 88063 5120 83 Linux
-/dev/...7 90112 102399 6144 83 Linux
-
-Command (m for help): The partition table has been altered!
-
+Command (m for help):
+The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
+
Alignment offsets:
0
0
57e721e38d1266c2df055067c18f2cf9 bsd.img
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
- Device Boot Start End Blocks Id System
-------------------
Create 1st primary partition
ada64ace122978d00d1d1c0e5ee45d26 bsd.img
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 2048 4095 1024 83 Linux
- Device Boot Start End Blocks Id System
-__ts_dev__1 2048 4095 1024 83 Linux
-------------------
Create 2st primary partition
2d8e8dff51a88a045db233418dd73fbe bsd.img
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 2048 4095 1024 83 Linux
+<removed>2 4096 20479 8192 a5 FreeBSD
- Device Boot Start End Blocks Id System
-__ts_dev__1 2048 4095 1024 83 Linux
-__ts_dev__2 4096 20479 8192 a5 FreeBSD
-------------------
Create default BSD
2e1cee529cb59c9341afef0443f196a1 bsd.img
---layout----------
-
+Welcome to fdisk <removed>.
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
-Command (m for help):
+Command (m for help): Entering to nested BSD disk label
-BSD disklabel command (m for help):
-4 partitions:
-# start end size fstype [fsize bsize cpg]
- c: 4096 20479 16384 unused 0 0
- d: 0 16064 16065 unused 0 0
+Command (m for help): Disk <removed>2: 10 MiB, 10485760 bytes, 20480 sectors
+Geometry: 255 heads, 63 sectors/track, 1 cylinders
+Units: sectors of 1 * 512 = 512 bytes
+Sector size (logical/physical): 512 bytes / 512 bytes
+I/O size (minimum/optimal): 512 bytes / 512 bytes
+Disk label type: bsd
+partitions: 4
+
+# Start End Size Type fsize bsize cpg
+c 4096 20479 16384 unused 0 0
+d 0 16064 16065 unused 0 0
+
+Command (m for help):
+Leaving nested disk label.
-BSD disklabel command (m for help):
Command (m for help):
-------------------
b5c121c2091b2ff26b880551feac7112 bsd.img
---layout----------
-
+Welcome to fdisk <removed>.
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
-Command (m for help):
+Command (m for help): Entering to nested BSD disk label
+
+Command (m for help): Disk <removed>2: 10 MiB, 10485760 bytes, 20480 sectors
+Geometry: 255 heads, 63 sectors/track, 1 cylinders
+Units: sectors of 1 * 512 = 512 bytes
+Sector size (logical/physical): 512 bytes / 512 bytes
+I/O size (minimum/optimal): 512 bytes / 512 bytes
+Disk label type: bsd
+partitions: 4
-BSD disklabel command (m for help):
-4 partitions:
-# start end size fstype [fsize bsize cpg]
- a: 4096 6144 2049 4.2BSD 0 0 0
- c: 4096 20479 16384 unused 0 0
- d: 0 16064 16065 unused 0 0
+# Start End Size Type fsize bsize cpg
+a 4096 6144 2049 4.2BSD 0 0 0
+c 4096 20479 16384 unused 0 0
+d 0 16064 16065 unused 0 0
+
+Command (m for help):
+Leaving nested disk label.
-BSD disklabel command (m for help):
Command (m for help):
-------------------
Be careful before using the write command.
-Command (m for help):
+Command (m for help): Entering to nested BSD disk label
-BSD disklabel command (m for help):
+Command (m for help):
0 unused 5 4.1BSD 9 4.4LFS d boot
1 swap 6 Eighth Edition a unknown e ADOS
2 Version 6 7 4.2BSD b HPFS f HFS
3 Version 7 8 MS-DOS c ISO-9660 10 AdvFS
4 System V
-BSD disklabel command (m for help):
\ No newline at end of file
+Command (m for help):
Create new GPT partition table
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: gpt
+Disk identifier: <removed>
-# Start End Size Type Name
-------------------
Create partitions
Change partition type by number
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: gpt
+Disk identifier: <removed>
+
+Device Start End Size Type
+<removed>1 2048 4095 1M EFI System
+<removed>2 4096 6143 1M Linux filesystem
+<removed>3 6144 8191 1M Linux filesystem
+<removed>4 8192 10239 1M Linux filesystem
+<removed>5 10240 12287 1M Linux filesystem
+<removed>6 12288 14335 1M Linux filesystem
+<removed>7 14336 16383 1M Linux filesystem
+<removed>8 16384 18431 1M Linux filesystem
-
-# Start End Size Type Name
- 1 2048 4095 1M EFI System
- 2 4096 6143 1M Linux filesyste
- 3 6144 8191 1M Linux filesyste
- 4 8192 10239 1M Linux filesyste
- 5 10240 12287 1M Linux filesyste
- 6 12288 14335 1M Linux filesyste
- 7 14336 16383 1M Linux filesyste
- 8 16384 18431 1M Linux filesyste
-------------------
Change partition type by UUID
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: gpt
+Disk identifier: <removed>
+
+Device Start End Size Type
+<removed>1 2048 4095 1M EFI System
+<removed>2 4096 6143 1M Linux filesystem
+<removed>3 6144 8191 1M Linux filesystem
+<removed>4 8192 10239 1M Linux filesystem
+<removed>5 10240 12287 1M Linux swap
+<removed>6 12288 14335 1M Linux filesystem
+<removed>7 14336 16383 1M Linux filesystem
+<removed>8 16384 18431 1M Linux filesystem
-
-# Start End Size Type Name
- 1 2048 4095 1M EFI System
- 2 4096 6143 1M Linux filesyste
- 3 6144 8191 1M Linux filesyste
- 4 8192 10239 1M Linux filesyste
- 5 10240 12287 1M Linux swap
- 6 12288 14335 1M Linux filesyste
- 7 14336 16383 1M Linux filesyste
- 8 16384 18431 1M Linux filesyste
-------------------
Delete partition
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: gpt
+Disk identifier: <removed>
+Device Start End Size Type
+<removed>1 2048 4095 1M EFI System
+<removed>3 6144 8191 1M Linux filesystem
+<removed>4 8192 10239 1M Linux filesystem
+<removed>5 10240 12287 1M Linux swap
+<removed>6 12288 14335 1M Linux filesystem
+<removed>7 14336 16383 1M Linux filesystem
+<removed>8 16384 18431 1M Linux filesystem
-# Start End Size Type Name
- 1 2048 4095 1M EFI System
- 3 6144 8191 1M Linux filesyste
- 4 8192 10239 1M Linux filesyste
- 5 10240 12287 1M Linux swap
- 6 12288 14335 1M Linux filesyste
- 7 14336 16383 1M Linux filesyste
- 8 16384 18431 1M Linux filesyste
-------------------
Create again partition
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: gpt
+Disk identifier: <removed>
+
+Device Start End Size Type
+<removed>1 2048 4095 1M EFI System
+<removed>2 4096 6143 1M Linux filesystem
+<removed>3 6144 8191 1M Linux filesystem
+<removed>4 8192 10239 1M Linux filesystem
+<removed>5 10240 12287 1M Linux swap
+<removed>6 12288 14335 1M Linux filesystem
+<removed>7 14336 16383 1M Linux filesystem
+<removed>8 16384 18431 1M Linux filesystem
-
-# Start End Size Type Name
- 1 2048 4095 1M EFI System
- 2 4096 6143 1M Linux filesyste
- 3 6144 8191 1M Linux filesyste
- 4 8192 10239 1M Linux filesyste
- 5 10240 12287 1M Linux swap
- 6 12288 14335 1M Linux filesyste
- 7 14336 16383 1M Linux filesyste
- 8 16384 18431 1M Linux filesyste
-------------------
57e721e38d1266c2df055067c18f2cf9 mbr-dos-mode.img
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-255 heads, 63 sectors/track, 1 cylinders
-Units = cylinders of 16065 * 512 = 8225280 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Geometry: 255 heads, 63 sectors/track, 1024 cylinders
+Units: cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
- Device Boot Start End Blocks Id System
-------------------
Create primary partition
ae4f9b12f4a768849f72ea36938c30c7 mbr-dos-mode.img
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-255 heads, 63 sectors/track, 1 cylinders
-Units = cylinders of 16065 * 512 = 8225280 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Geometry: 255 heads, 63 sectors/track, 1024 cylinders
+Units: cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 1 1 8001 83 Linux
- Device Boot Start End Blocks Id System
-__ts_dev__1 1 1 8001 83 Linux
-------------------
Set partition type
4a5dba818f9962a82a086d8b99b89a17 mbr-dos-mode.img
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-255 heads, 63 sectors/track, 1 cylinders
-Units = cylinders of 16065 * 512 = 8225280 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Geometry: 255 heads, 63 sectors/track, 1024 cylinders
+Units: cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 1 1 8001 bf Solaris
- Device Boot Start End Blocks Id System
-__ts_dev__1 1 1 8001 bf Solaris
-------------------
Set primary partition active
c30e9c761b71cf95c67e758b93706ac5 mbr-dos-mode.img
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-255 heads, 63 sectors/track, 1 cylinders
-Units = cylinders of 16065 * 512 = 8225280 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Geometry: 255 heads, 63 sectors/track, 1024 cylinders
+Units: cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 * 1 1 8001 bf Solaris
- Device Boot Start End Blocks Id System
-__ts_dev__1 * 1 1 8001 bf Solaris
-------------------
Re-create primary partition
ae4f9b12f4a768849f72ea36938c30c7 mbr-dos-mode.img
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-255 heads, 63 sectors/track, 1 cylinders
-Units = cylinders of 16065 * 512 = 8225280 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Geometry: 255 heads, 63 sectors/track, 1024 cylinders
+Units: cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 1 1 8001 83 Linux
- Device Boot Start End Blocks Id System
-__ts_dev__1 1 1 8001 83 Linux
-------------------
Create extended partition
76987a00b353687cd1dba3ddea9d66f9 mbr-dos-mode.img
---layout----------
-__ts_dev__: 10 MB, 10485760 bytes, 20480 sectors
-255 heads, 63 sectors/track, 1 cylinders
-Units = cylinders of 16065 * 512 = 8225280 bytes
+Disk <removed>: 10 MiB, 10485760 bytes, 20480 sectors
+Geometry: 255 heads, 63 sectors/track, 1024 cylinders
+Units: cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 1 1 8001 83 Linux
+<removed>2 2 12 88357+ 5 Extended
- Device Boot Start End Blocks Id System
-__ts_dev__1 1 1 8001 83 Linux
-__ts_dev__2 2 12 88357+ 5 Extended
-------------------
Create logical partitions
a1cd6708e4a6d2e5f6bc9d5c0da0cf3b mbr-dos-mode.img
---layout----------
-__ts_dev__: 57 MB, 57577472 bytes, 112456 sectors
-255 heads, 63 sectors/track, 7 cylinders
-Units = cylinders of 16065 * 512 = 8225280 bytes
+Disk <removed>: 54.9 MiB, 57577472 bytes, 112456 sectors
+Geometry: 255 heads, 63 sectors/track, 1024 cylinders
+Units: cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
-
- Device Boot Start End Blocks Id System
-__ts_dev__1 1 1 8001 83 Linux
-__ts_dev__2 2 12 88357+ 5 Extended
-__ts_dev__5 2 3 16033+ 83 Linux
-__ts_dev__6 4 5 16033+ 83 Linux
-__ts_dev__7 6 7 16033+ 83 Linux
-__ts_dev__8 8 9 16033+ 83 Linux
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 1 1 8001 83 Linux
+<removed>2 2 12 88357+ 5 Extended
+<removed>5 2 3 16033+ 83 Linux
+<removed>6 4 5 16033+ 83 Linux
+<removed>7 6 7 16033+ 83 Linux
+<removed>8 8 9 16033+ 83 Linux
+
-------------------
Delete logical partitions
4c6937d529ace5661fb82efb9394154a mbr-dos-mode.img
---layout----------
-__ts_dev__: 57 MB, 57577472 bytes, 112456 sectors
-255 heads, 63 sectors/track, 7 cylinders
-Units = cylinders of 16065 * 512 = 8225280 bytes
+Disk <removed>: 54.9 MiB, 57577472 bytes, 112456 sectors
+Geometry: 255 heads, 63 sectors/track, 1024 cylinders
+Units: cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 1 1 8001 83 Linux
+<removed>2 2 12 88357+ 5 Extended
+<removed>5 6 7 16033+ 83 Linux
- Device Boot Start End Blocks Id System
-__ts_dev__1 1 1 8001 83 Linux
-__ts_dev__2 2 12 88357+ 5 Extended
-__ts_dev__5 6 7 16033+ 83 Linux
-------------------
Create another logical partition
9589eaaed698d2402945ab3e513c1eb4 mbr-dos-mode.img
---layout----------
-__ts_dev__: 57 MB, 57577472 bytes, 112456 sectors
-255 heads, 63 sectors/track, 7 cylinders
-Units = cylinders of 16065 * 512 = 8225280 bytes
+Disk <removed>: 54.9 MiB, 57577472 bytes, 112456 sectors
+Geometry: 255 heads, 63 sectors/track, 1024 cylinders
+Units: cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
- Device Boot Start End Blocks Id System
-__ts_dev__1 1 1 8001 83 Linux
-__ts_dev__2 2 12 88357+ 5 Extended
-__ts_dev__5 6 7 16033+ 83 Linux
-__ts_dev__6 2 3 16033+ 83 Linux
+Device Boot Start End Blocks Id System
+<removed>1 1 1 8001 83 Linux
+<removed>2 2 12 88357+ 5 Extended
+<removed>5 6 7 16033+ 83 Linux
+<removed>6 2 3 16033+ 83 Linux
+
+Partition table entries are not in disk order.
-Partition table entries are not in disk order
-------------------
Delete primary partition
1e6d646e5df66a2664cfbbb13fa9a08a mbr-dos-mode.img
---layout----------
-__ts_dev__: 57 MB, 57577472 bytes, 112456 sectors
-255 heads, 63 sectors/track, 7 cylinders
-Units = cylinders of 16065 * 512 = 8225280 bytes
+Disk <removed>: 54.9 MiB, 57577472 bytes, 112456 sectors
+Geometry: 255 heads, 63 sectors/track, 1024 cylinders
+Units: cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>2 2 12 88357+ 5 Extended
+<removed>5 6 7 16033+ 83 Linux
+<removed>6 2 3 16033+ 83 Linux
- Device Boot Start End Blocks Id System
-__ts_dev__2 2 12 88357+ 5 Extended
-__ts_dev__5 6 7 16033+ 83 Linux
-__ts_dev__6 2 3 16033+ 83 Linux
+Partition table entries are not in disk order.
-Partition table entries are not in disk order
-------------------
Delete extended partition
fc3cdb12326656d7996b09b6f76973e7 mbr-dos-mode.img
---layout----------
-__ts_dev__: 57 MB, 57577472 bytes, 112456 sectors
-255 heads, 63 sectors/track, 7 cylinders
-Units = cylinders of 16065 * 512 = 8225280 bytes
+Disk <removed>: 54.9 MiB, 57577472 bytes, 112456 sectors
+Geometry: 255 heads, 63 sectors/track, 1024 cylinders
+Units: cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
- Device Boot Start End Blocks Id System
-------------------
4e23561dcb81678bb1bd678722c7cbb7 mbr-nondos-mode.img
---layout----------
-__ts_dev__: 20 MB, 20971520 bytes, 40960 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 20 MiB, 20971520 bytes, 40960 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
- Device Boot Start End Blocks Id System
-------------------
Create 1st primary partition
e21e16b7452d82e2a2810a1de8c3db05 mbr-nondos-mode.img
---layout----------
-__ts_dev__: 20 MB, 20971520 bytes, 40960 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 20 MiB, 20971520 bytes, 40960 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 2048 8191 3072 83 Linux
- Device Boot Start End Blocks Id System
-__ts_dev__1 2048 8191 3072 83 Linux
-------------------
Set primary partition active
47f024f3b406598a0159400af7382e2c mbr-nondos-mode.img
---layout----------
-__ts_dev__: 20 MB, 20971520 bytes, 40960 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 20 MiB, 20971520 bytes, 40960 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 * 2048 8191 3072 83 Linux
- Device Boot Start End Blocks Id System
-__ts_dev__1 * 2048 8191 3072 83 Linux
-------------------
Re-create 1st primary partition
a5543ee1e3d2cf79913a56bae893a0f0 mbr-nondos-mode.img
---layout----------
-__ts_dev__: 20 MB, 20971520 bytes, 40960 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 20 MiB, 20971520 bytes, 40960 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 2048 8191 3072 83 Linux
- Device Boot Start End Blocks Id System
-__ts_dev__1 2048 8191 3072 83 Linux
-------------------
Create 2nd primary partition
9d31ee977e26e72ebce78e8e543cd4ce mbr-nondos-mode.img
---layout----------
-__ts_dev__: 20 MB, 20971520 bytes, 40960 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 20 MiB, 20971520 bytes, 40960 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 2048 8191 3072 83 Linux
+<removed>2 8192 12287 2048 83 Linux
- Device Boot Start End Blocks Id System
-__ts_dev__1 2048 8191 3072 83 Linux
-__ts_dev__2 8192 12287 2048 83 Linux
-------------------
Create extended partition
9528631b198e44564f67f8ca97fa51b8 mbr-nondos-mode.img
---layout----------
-__ts_dev__: 20 MB, 20971520 bytes, 40960 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 20 MiB, 20971520 bytes, 40960 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 2048 8191 3072 83 Linux
+<removed>2 8192 12287 2048 83 Linux
+<removed>3 12288 40959 14336 5 Extended
- Device Boot Start End Blocks Id System
-__ts_dev__1 2048 8191 3072 83 Linux
-__ts_dev__2 8192 12287 2048 83 Linux
-__ts_dev__3 12288 40959 14336 5 Extended
-------------------
Create logical partitions
db4406e7bc0773f234fd1db1b58b5997 mbr-nondos-mode.img
---layout----------
-__ts_dev__: 20 MB, 20971520 bytes, 40960 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 20 MiB, 20971520 bytes, 40960 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
-
- Device Boot Start End Blocks Id System
-__ts_dev__1 2048 8191 3072 83 Linux
-__ts_dev__2 8192 12287 2048 83 Linux
-__ts_dev__3 12288 40959 14336 5 Extended
-__ts_dev__5 14336 18431 2048 83 Linux
-__ts_dev__6 20480 24575 2048 83 Linux
-__ts_dev__7 26624 30719 2048 83 Linux
-__ts_dev__8 32768 36863 2048 83 Linux
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 2048 8191 3072 83 Linux
+<removed>2 8192 12287 2048 83 Linux
+<removed>3 12288 40959 14336 5 Extended
+<removed>5 14336 18431 2048 83 Linux
+<removed>6 20480 24575 2048 83 Linux
+<removed>7 26624 30719 2048 83 Linux
+<removed>8 32768 36863 2048 83 Linux
+
-------------------
Delete logical partitions
de85b8d74f52f307b9467ea4c33438cb mbr-nondos-mode.img
---layout----------
-__ts_dev__: 20 MB, 20971520 bytes, 40960 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 20 MiB, 20971520 bytes, 40960 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 2048 8191 3072 83 Linux
+<removed>2 8192 12287 2048 83 Linux
+<removed>3 12288 40959 14336 5 Extended
+<removed>5 26624 30719 2048 83 Linux
- Device Boot Start End Blocks Id System
-__ts_dev__1 2048 8191 3072 83 Linux
-__ts_dev__2 8192 12287 2048 83 Linux
-__ts_dev__3 12288 40959 14336 5 Extended
-__ts_dev__5 26624 30719 2048 83 Linux
-------------------
Create another logical partition
28d0cbe795535ee025dc7a4781516965 mbr-nondos-mode.img
---layout----------
-__ts_dev__: 20 MB, 20971520 bytes, 40960 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 20 MiB, 20971520 bytes, 40960 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>1 2048 8191 3072 83 Linux
+<removed>2 8192 12287 2048 83 Linux
+<removed>3 12288 40959 14336 5 Extended
+<removed>5 26624 30719 2048 83 Linux
+<removed>6 14336 18431 2048 83 Linux
- Device Boot Start End Blocks Id System
-__ts_dev__1 2048 8191 3072 83 Linux
-__ts_dev__2 8192 12287 2048 83 Linux
-__ts_dev__3 12288 40959 14336 5 Extended
-__ts_dev__5 26624 30719 2048 83 Linux
-__ts_dev__6 14336 18431 2048 83 Linux
+Partition table entries are not in disk order.
-Partition table entries are not in disk order
-------------------
Delete primary partition
6f1b62718cf8d83602d51de8944cee51 mbr-nondos-mode.img
---layout----------
-__ts_dev__: 20 MB, 20971520 bytes, 40960 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 20 MiB, 20971520 bytes, 40960 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
- Device Boot Start End Blocks Id System
-__ts_dev__2 8192 12287 2048 83 Linux
-__ts_dev__3 12288 40959 14336 5 Extended
-__ts_dev__5 26624 30719 2048 83 Linux
-__ts_dev__6 14336 18431 2048 83 Linux
+Device Boot Start End Blocks Id System
+<removed>2 8192 12287 2048 83 Linux
+<removed>3 12288 40959 14336 5 Extended
+<removed>5 26624 30719 2048 83 Linux
+<removed>6 14336 18431 2048 83 Linux
+
+Partition table entries are not in disk order.
-Partition table entries are not in disk order
-------------------
Delete primary partition
7b29a3cda33e990e8a7877b81988b933 mbr-nondos-mode.img
---layout----------
-__ts_dev__: 20 MB, 20971520 bytes, 40960 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 20 MiB, 20971520 bytes, 40960 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
+Device Boot Start End Blocks Id System
+<removed>3 12288 40959 14336 5 Extended
+<removed>5 26624 30719 2048 83 Linux
+<removed>6 14336 18431 2048 83 Linux
- Device Boot Start End Blocks Id System
-__ts_dev__3 12288 40959 14336 5 Extended
-__ts_dev__5 26624 30719 2048 83 Linux
-__ts_dev__6 14336 18431 2048 83 Linux
+Partition table entries are not in disk order.
-Partition table entries are not in disk order
-------------------
Delete extended partition
e1ef48d3d42f4ebcfd5bf4baf5e370e9 mbr-nondos-mode.img
---layout----------
-__ts_dev__: 20 MB, 20971520 bytes, 40960 sectors
-Units = sectors of 1 * 512 = 512 bytes
+Disk <removed>: 20 MiB, 20971520 bytes, 40960 sectors
+Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
-Disk identifier: 0x00000001
+Disk identifier: <removed>
+
- Device Boot Start End Blocks Id System
-------------------
f1c9645dbc14efddc7d8a322685f26eb oddinput.img
Empty image listing
-Disk testimage: 10 MB, 10485760 bytes, 20480 sectors
-Units = cylinders of 16065 * 512 = 8225280 bytes
+Disk testimage: 10 MiB, 10485760 bytes, 20480 sectors
+Units: cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
}
function ts_fdisk_clean {
- local DEVNAME=$(basename "$1")
+ local DEVNAME=$1
# remove non comparable parts of fdisk output
if [ x"${DEVNAME}" != x"" ]; then
- sed -i -e "s/\/dev\/${DEVNAME}/\/dev\/.../g" $TS_OUTPUT
+ sed -i -e "s:${DEVNAME}:<removed>:g" $TS_OUTPUT
fi
- sed -i -e 's/Disk identifier:.*//g' \
- -e 's/Building a new.*//g' \
- -e 's/Welcome to fdisk.*//g' \
+ sed -i -e 's/Disk identifier:.*/Disk identifier: <removed>/g' \
+ -e 's/Created a new.*/Created a new <removed>./g' \
+ -e 's/^Device[[:blank:]]*Start/Device Start/g' \
+ -e 's/^Device[[:blank:]]*Boot/Device Boot/g' \
+ -e 's/^Device[[:blank:]]*Flag/Device Flag/g' \
+ -e 's/Welcome to fdisk.*/Welcome to fdisk <removed>./g' \
$TS_OUTPUT
}
rmmod scsi_debug
ts_fdisk_clean $DEVICE
+ts_fdisk_clean $MD_DEVICE
ts_finalize
EOF
ts_device_deinit $DEVICE
-
-ts_fdisk_clean
+ts_fdisk_clean $DEVICE
ts_finalize
function print_layout {
echo -ne "\n---layout----------" >> $TS_OUTPUT
- $TS_CMD_FDISK -l ${TEST_IMAGE_NAME} | \
- sed 's/^.*\.img/__ts_dev__/g;
- s/^[[:blank:]]*Device Boot/ Device Boot/g' >> $TS_OUTPUT 2>&1
+ $TS_CMD_FDISK -l ${TEST_IMAGE_NAME} >> $TS_OUTPUT
echo -ne "-------------------\n\n" >> $TS_OUTPUT
}
function print_bsd_layout {
echo -ne "\n---layout----------" >> $TS_OUTPUT
- echo -e "${FDISK_CMD_BSD_LIST}" | $TS_CMD_FDISK ${TEST_IMAGE_NAME} | \
- sed 's/Reading .*//g;
- s/Welcome to fdisk .*//' >> $TS_OUTPUT 2>&1
+ echo -e "${FDISK_CMD_BSD_LIST}" | \
+ $TS_CMD_FDISK ${TEST_IMAGE_NAME} >> $TS_OUTPUT
echo -ne "-------------------\n\n" >> $TS_OUTPUT
}
$TS_CMD_FDISK ${TEST_IMAGE_NAME} | \
sed 's/Reading .*//g; s/Welcome to fdisk .*//' >> $TS_OUTPUT 2>&1
+ts_fdisk_clean ${TEST_IMAGE_NAME}
ts_finalize
FDISK_CMD_DELETE_PART="d\n2\n" # delete 2nd partition
FDISK_CMD_CREATE_PART="n\n2\n\n\n" # create 2nd partition
-#set -x
-
function print_layout {
echo -ne "\n---layout----------" >> $TS_OUTPUT
- $TS_CMD_FDISK -l ${TEST_IMAGE_NAME} 2> /dev/null | \
- sed 's/^.*\.img/__ts_dev__/g;
- s/^[[:blank:]]*Device Boot/ Device Boot/g' >> $TS_OUTPUT 2>&1
+ $TS_CMD_FDISK -l ${TEST_IMAGE_NAME} >> $TS_OUTPUT
echo -ne "-------------------\n\n" >> $TS_OUTPUT
}
print_layout
+ts_fdisk_clean ${TEST_IMAGE_NAME}
ts_finalize
. $TS_TOPDIR/functions.sh
ts_init "$*"
-# cmd to change number of cylinders to 1024 and changes system id to 0x1
-FDISK_CMD_INIT="x\nc\n1024\ni\n0x1\nr\n"
+FDISK_CMD_INIT="x\ni\n0x1\nr\n"
FDISK_CMD_WRITE_CLOSE="w\nq\n"
FDISK_CMD_CREATE_DOSLABEL="o\n" #create dos label
FDISK_CMD_CREATE_PRIMARY="n\np\n1\n\n+1M\n" # create primary partition 1 of size 1MB
FDISK_CMD_DELETE_PRIMARY="d\n1\n" # delete first primary
FDISK_CMD_DELETE_EXTENDED="d\n2\n" # delete second primary
-#set -x
+FDISK_OPTIONS="-C 1024 -c=dos -u=cylinders"
function print_layout {
echo -ne "\n---layout----------" >> $TS_OUTPUT
- $TS_CMD_FDISK -c=dos -u=cylinders -l ${TEST_IMAGE_NAME} | \
- sed 's/^.*\.img/__ts_dev__/g;
- s/^[[:blank:]]*Device Boot/ Device Boot/g' >> $TS_OUTPUT 2>&1
+ $TS_CMD_FDISK ${FDISK_OPTIONS} -l ${TEST_IMAGE_NAME} >> $TS_OUTPUT
echo -ne "-------------------\n\n" >> $TS_OUTPUT
}
TEST_IMAGE_NAME=$(ts_image_init 10)
ts_image_md5sum >> $TS_OUTPUT 2>&1
-# need to run init twice, to change system ID after new label, otherwise system
-# ID will be random and will screw up md5's
ts_log "Create new DOS partition table"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_CREATE_DOSLABEL}${FDISK_CMD_INIT}${FDISK_CMD_WRITE_CLOSE}" \
- | $TS_CMD_FDISK -c=dos -u=cylinders ${TEST_IMAGE_NAME} &> /dev/null
+echo -e "${FDISK_CMD_CREATE_DOSLABEL}${FDISK_CMD_INIT}${FDISK_CMD_WRITE_CLOSE}" \
+ | $TS_CMD_FDISK ${FDISK_OPTIONS} ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Create primary partition"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_CREATE_PRIMARY}${FDISK_CMD_WRITE_CLOSE}" | \
- $TS_CMD_FDISK -c=dos -u=cylinders ${TEST_IMAGE_NAME} &> /dev/null
+echo -e "${FDISK_CMD_CREATE_PRIMARY}${FDISK_CMD_WRITE_CLOSE}" | \
+ $TS_CMD_FDISK ${FDISK_OPTIONS} ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Set partition type"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_CHANGE_PARTTYPE}${FDISK_CMD_WRITE_CLOSE}" | \
- $TS_CMD_FDISK -c=dos -u=cylinders ${TEST_IMAGE_NAME} &> /dev/null
+echo -e "${FDISK_CMD_CHANGE_PARTTYPE}${FDISK_CMD_WRITE_CLOSE}" | \
+ $TS_CMD_FDISK ${FDISK_OPTIONS} ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Set primary partition active"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_SET_ACTIVE}${FDISK_CMD_WRITE_CLOSE}" | \
- $TS_CMD_FDISK -c=dos -u=cylinders ${TEST_IMAGE_NAME} &> /dev/null
+echo -e "${FDISK_CMD_SET_ACTIVE}${FDISK_CMD_WRITE_CLOSE}" | \
+ $TS_CMD_FDISK ${FDISK_OPTIONS} ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Re-create primary partition"
-echo -e "${FDISK_CMD_INIT}d\n${FDISK_CMD_CREATE_PRIMARY}${FDISK_CMD_WRITE_CLOSE}" | \
- $TS_CMD_FDISK -c=dos -u=cylinders ${TEST_IMAGE_NAME} &> /dev/null
+echo -e "d\n${FDISK_CMD_CREATE_PRIMARY}${FDISK_CMD_WRITE_CLOSE}" | \
+ $TS_CMD_FDISK ${FDISK_OPTIONS} ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Create extended partition"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_CREATE_EXTENDED}${FDISK_CMD_WRITE_CLOSE}" | \
- $TS_CMD_FDISK -c=dos -u=cylinders ${TEST_IMAGE_NAME} &> /dev/null
+echo -e "${FDISK_CMD_CREATE_EXTENDED}${FDISK_CMD_WRITE_CLOSE}" | \
+ $TS_CMD_FDISK ${FDISK_OPTIONS} ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Create logical partitions"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_WRITE_CLOSE}" \
- | $TS_CMD_FDISK -c=dos -u=cylinders ${TEST_IMAGE_NAME} &> /dev/null
+echo -e "${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_WRITE_CLOSE}" \
+ | $TS_CMD_FDISK ${FDISK_OPTIONS} ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Delete logical partitions"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_DELETE_LOGICALS}${FDISK_CMD_WRITE_CLOSE}" \
- | $TS_CMD_FDISK -c=dos -u=cylinders ${TEST_IMAGE_NAME} &> /dev/null
+echo -e "${FDISK_CMD_DELETE_LOGICALS}${FDISK_CMD_WRITE_CLOSE}" \
+ | $TS_CMD_FDISK ${FDISK_OPTIONS} ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Create another logical partition"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_WRITE_CLOSE}" \
- | $TS_CMD_FDISK -c=dos -u=cylinders ${TEST_IMAGE_NAME} &> /dev/null
+echo -e "${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_WRITE_CLOSE}" \
+ | $TS_CMD_FDISK ${FDISK_OPTIONS} ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Delete primary partition"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_DELETE_PRIMARY}${FDISK_CMD_WRITE_CLOSE}" \
- | $TS_CMD_FDISK -c=dos -u=cylinders ${TEST_IMAGE_NAME} &> /dev/null
+echo -e "${FDISK_CMD_DELETE_PRIMARY}${FDISK_CMD_WRITE_CLOSE}" \
+ | $TS_CMD_FDISK ${FDISK_OPTIONS} ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Delete extended partition"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_DELETE_EXTENDED}${FDISK_CMD_WRITE_CLOSE}" \
- | $TS_CMD_FDISK -c=dos -u=cylinders ${TEST_IMAGE_NAME} &> /dev/null
+echo -e "${FDISK_CMD_DELETE_EXTENDED}${FDISK_CMD_WRITE_CLOSE}" \
+ | $TS_CMD_FDISK ${FDISK_OPTIONS} ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
+ts_fdisk_clean ${TEST_IMAGE_NAME}
ts_finalize
function print_layout {
echo -ne "\n---layout----------" >> $TS_OUTPUT
- $TS_CMD_FDISK -l ${TEST_IMAGE_NAME} | \
- sed 's/^.*\.img/__ts_dev__/g;
- s/^[[:blank:]]*Device Boot/ Device Boot/g' >> $TS_OUTPUT 2>&1
+ $TS_CMD_FDISK -l ${TEST_IMAGE_NAME} >> $TS_OUTPUT
echo -ne "-------------------\n\n" >> $TS_OUTPUT
}
print_layout
ts_log "Create 1st primary partition"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_CREATE_1PRIMARY}${FDISK_CMD_WRITE_CLOSE}" | \
+echo -e "${FDISK_CMD_CREATE_1PRIMARY}${FDISK_CMD_WRITE_CLOSE}" | \
$TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Set primary partition active"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_SET_ACTIVE}${FDISK_CMD_WRITE_CLOSE}" | \
+echo -e "${FDISK_CMD_SET_ACTIVE}${FDISK_CMD_WRITE_CLOSE}" | \
$TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Re-create 1st primary partition"
-echo -e "${FDISK_CMD_INIT}d\n${FDISK_CMD_CREATE_1PRIMARY}${FDISK_CMD_WRITE_CLOSE}" | \
+echo -e "d\n${FDISK_CMD_CREATE_1PRIMARY}${FDISK_CMD_WRITE_CLOSE}" | \
$TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Create 2nd primary partition"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_CREATE_2PRIMARY}${FDISK_CMD_WRITE_CLOSE}" | \
+echo -e "${FDISK_CMD_CREATE_2PRIMARY}${FDISK_CMD_WRITE_CLOSE}" | \
$TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Create extended partition"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_CREATE_EXTENDED}${FDISK_CMD_WRITE_CLOSE}" | \
+echo -e "${FDISK_CMD_CREATE_EXTENDED}${FDISK_CMD_WRITE_CLOSE}" | \
$TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Create logical partitions"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_WRITE_CLOSE}" \
+echo -e "${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_WRITE_CLOSE}" \
| $TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Delete logical partitions"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_DELETE_LOGICALS}${FDISK_CMD_WRITE_CLOSE}" \
+echo -e "${FDISK_CMD_DELETE_LOGICALS}${FDISK_CMD_WRITE_CLOSE}" \
| $TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
+
ts_log "Create another logical partition"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_WRITE_CLOSE}" \
+echo -e "${FDISK_CMD_CREATE_LOGICAL}${FDISK_CMD_WRITE_CLOSE}" \
| $TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Delete primary partition"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_DELETE_1PRIMARY}${FDISK_CMD_WRITE_CLOSE}" \
+echo -e "${FDISK_CMD_DELETE_1PRIMARY}${FDISK_CMD_WRITE_CLOSE}" \
| $TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Delete primary partition"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_DELETE_2PRIMARY}${FDISK_CMD_WRITE_CLOSE}" \
+echo -e "${FDISK_CMD_DELETE_2PRIMARY}${FDISK_CMD_WRITE_CLOSE}" \
| $TS_CMD_FDISK ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
ts_log "Delete extended partition"
-echo -e "${FDISK_CMD_INIT}${FDISK_CMD_DELETE_EXTENDED}${FDISK_CMD_WRITE_CLOSE}" \
+echo -e "${FDISK_CMD_DELETE_EXTENDED}${FDISK_CMD_WRITE_CLOSE}" \
| $TS_CMD_FDISK -c=dos -u=cylinders ${TEST_IMAGE_NAME} &> /dev/null
ts_image_md5sum >> $TS_OUTPUT 2>&1
print_layout
+ts_fdisk_clean ${TEST_IMAGE_NAME}
+
ts_finalize
projects / thirdparty / util-linux.git / commitdiff
