Up until now it has been assumed that the application would be able to
enter the advertising SID in sockaddr_iso_bc.bc_sid, but userspace has
no access to SID since the likes of MGMT_EV_DEVICE_FOUND cannot carry
it, so it was left unset (0x00) which means it would be unable to
synchronize if the broadcast source is using a different SID e.g. 0x04:
> HCI Event: LE Meta Event (0x3e) plen 57
LE Extended Advertising Report (0x0d)
Num reports: 1
Entry 0
Event type: 0x0000
Props: 0x0000
Data status: Complete
Address type: Random (0x01)
Address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Primary PHY: LE 1M
Secondary PHY: LE 2M
SID: 0x04
TX power: 127 dBm
RSSI: -55 dBm (0xc9)
Periodic advertising interval: 180.00 msec (0x0090)
Direct address type: Public (0x00)
Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
Data length: 0x1f
06 16 52 18 5b 0b e1 05 16 56 18 04 00 11 30 4c ..R.[....V....0L
75 69 7a 27 73 20 53 32 33 20 55 6c 74 72 61 uiz's S23 Ultra
Service Data: Broadcast Audio Announcement (0x1852)
Broadcast ID:
14748507 (0xe10b5b)
Service Data: Public Broadcast Announcement (0x1856)
Data[2]: 0400
Unknown EIR field 0x30[16]:
4c75697a27732053323320556c747261
< HCI Command: LE Periodic Advertising Create Sync (0x08|0x0044) plen 14
Options: 0x0000
Use advertising SID, Advertiser Address Type and address
Reporting initially enabled
SID: 0x00 (<- Invalid)
Adv address type: Random (0x01)
Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Skip: 0x0000
Sync timeout: 20000 msec (0x07d0)
Sync CTE type: 0x0000
So instead this changes now allow application to set HCI_SID_INVALID
which will make hci_le_pa_create_sync to wait for a report, update the
conn->sid using the report SID and only then issue PA create sync
command:
< HCI Command: LE Periodic Advertising Create Sync
Options: 0x0000
Use advertising SID, Advertiser Address Type and address
Reporting initially enabled
SID: 0x04
Adv address type: Random (0x01)
Adv address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Skip: 0x0000
Sync timeout: 20000 msec (0x07d0)
Sync CTE type: 0x0000
> HCI Event: LE Meta Event (0x3e) plen 16
LE Periodic Advertising Sync Established (0x0e)
Status: Success (0x00)
Sync handle: 64
Advertising SID: 0x04
Advertiser address type: Random (0x01)
Advertiser address: 0B:82:E8:50:6D:C8 (Non-Resolvable)
Advertiser PHY: LE 2M (0x02)
Periodic advertising interval: 180.00 msec (0x0090)
Advertiser clock accuracy: 0x05
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
{
struct hci_conn *conn;
+ bt_dev_dbg(hdev, "dst %pMR type %d sid %d", dst, dst_type, sid);
+
conn = hci_conn_add_unset(hdev, ISO_LINK, dst, HCI_ROLE_SLAVE);
if (IS_ERR(conn))
return conn;
return;
}
- err = hci_send_frame(hdev, skb);
- if (err < 0) {
- hci_cmd_sync_cancel_sync(hdev, -err);
- return;
+ if (hci_skb_opcode(skb) != HCI_OP_NOP) {
+ err = hci_send_frame(hdev, skb);
+ if (err < 0) {
+ hci_cmd_sync_cancel_sync(hdev, -err);
+ return;
+ }
+ atomic_dec(&hdev->cmd_cnt);
}
if (hdev->req_status == HCI_REQ_PEND &&
kfree_skb(hdev->req_skb);
hdev->req_skb = skb_clone(hdev->sent_cmd, GFP_KERNEL);
}
-
- atomic_dec(&hdev->cmd_cnt);
}
static void hci_cmd_work(struct work_struct *work)
info->secondary_phy &= 0x1f;
}
+ /* Check if PA Sync is pending and if the hci_conn SID has not
+ * been set update it.
+ */
+ if (hci_dev_test_flag(hdev, HCI_PA_SYNC)) {
+ struct hci_conn *conn;
+
+ conn = hci_conn_hash_lookup_create_pa_sync(hdev);
+ if (conn && conn->sid == HCI_SID_INVALID)
+ conn->sid = info->sid;
+ }
+
if (legacy_evt_type != LE_ADV_INVALID) {
process_adv_report(hdev, legacy_evt_type, &info->bdaddr,
info->bdaddr_type, NULL, 0,
/* Only match event if command OGF is for LE */
if (hdev->req_skb &&
- hci_opcode_ogf(hci_skb_opcode(hdev->req_skb)) == 0x08 &&
+ (hci_opcode_ogf(hci_skb_opcode(hdev->req_skb)) == 0x08 ||
+ hci_skb_opcode(hdev->req_skb) == HCI_OP_NOP) &&
hci_skb_event(hdev->req_skb) == ev->subevent) {
*opcode = hci_skb_opcode(hdev->req_skb);
hci_req_cmd_complete(hdev, *opcode, 0x00, req_complete,
goto done;
}
+ hci_dev_lock(hdev);
kfree_skb(hdev->recv_event);
hdev->recv_event = skb_clone(skb, GFP_KERNEL);
+ hci_dev_unlock(hdev);
event = hdr->evt;
if (!event) {
static void create_pa_complete(struct hci_dev *hdev, void *data, int err)
{
+ struct hci_conn *conn = data;
+ struct hci_conn *pa_sync;
+
bt_dev_dbg(hdev, "err %d", err);
- if (!err)
+ if (err == -ECANCELED)
return;
+ hci_dev_lock(hdev);
+
hci_dev_clear_flag(hdev, HCI_PA_SYNC);
- if (err == -ECANCELED)
- return;
+ if (!hci_conn_valid(hdev, conn))
+ clear_bit(HCI_CONN_CREATE_PA_SYNC, &conn->flags);
- hci_dev_lock(hdev);
+ if (!err)
+ goto unlock;
- hci_update_passive_scan_sync(hdev);
+ /* Add connection to indicate PA sync error */
+ pa_sync = hci_conn_add_unset(hdev, ISO_LINK, BDADDR_ANY,
+ HCI_ROLE_SLAVE);
+ if (IS_ERR(pa_sync))
+ goto unlock;
+
+ set_bit(HCI_CONN_PA_SYNC_FAILED, &pa_sync->flags);
+
+ /* Notify iso layer */
+ hci_connect_cfm(pa_sync, bt_status(err));
+
+unlock:
hci_dev_unlock(hdev);
}
if (!hci_conn_valid(hdev, conn))
return -ECANCELED;
+ if (conn->sync_handle != HCI_SYNC_HANDLE_INVALID)
+ return -EINVAL;
+
if (hci_dev_test_and_set_flag(hdev, HCI_PA_SYNC))
return -EBUSY;
+ /* Stop scanning if SID has not been set and active scanning is enabled
+ * so we use passive scanning which will be scanning using the allow
+ * list programmed to contain only the connection address.
+ */
+ if (conn->sid == HCI_SID_INVALID &&
+ hci_dev_test_flag(hdev, HCI_LE_SCAN)) {
+ hci_scan_disable_sync(hdev);
+ hci_dev_set_flag(hdev, HCI_LE_SCAN_INTERRUPTED);
+ hci_discovery_set_state(hdev, DISCOVERY_STOPPED);
+ }
+
/* Mark HCI_CONN_CREATE_PA_SYNC so hci_update_passive_scan_sync can
* program the address in the allow list so PA advertisements can be
* received.
hci_update_passive_scan_sync(hdev);
+ /* SID has not been set listen for HCI_EV_LE_EXT_ADV_REPORT to update
+ * it.
+ */
+ if (conn->sid == HCI_SID_INVALID)
+ __hci_cmd_sync_status_sk(hdev, HCI_OP_NOP, 0, NULL,
+ HCI_EV_LE_EXT_ADV_REPORT,
+ conn->conn_timeout, NULL);
+
memset(&cp, 0, sizeof(cp));
cp.options = qos->bcast.options;
cp.sid = conn->sid;
iso_pi(sk)->dst_type = sa->iso_bc->bc_bdaddr_type;
- if (sa->iso_bc->bc_sid > 0x0f)
+ if (sa->iso_bc->bc_sid > 0x0f && sa->iso_bc->bc_sid != HCI_SID_INVALID)
return -EINVAL;
iso_pi(sk)->bc_sid = sa->iso_bc->bc_sid;
{
struct hci_ev_le_pa_sync_established *ev = data;
+ if (iso_pi(sk)->bc_sid == HCI_SID_INVALID)
+ return true;
+
return ev->sid == iso_pi(sk)->bc_sid;
}
if (ev1) {
sk = iso_get_sock(&hdev->bdaddr, bdaddr, BT_LISTEN,
iso_match_sid, ev1);
- if (sk && !ev1->status)
+ if (sk && !ev1->status) {
iso_pi(sk)->sync_handle = le16_to_cpu(ev1->handle);
+ iso_pi(sk)->bc_sid = ev1->sid;
+ }
goto done;
}